Hydroxyapatite Hierarchically Nanostructured Porous Hollow Microspheres: Rapid, Sustainable Microwave-Hydrothermal Synthesis by Using Creatine Phosphate as an Organic Phosphorus Source and Application in Drug Delivery and Protein Adsorption

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

Fabrication of Novel 3-D Nanocomposites of HAp-TiC-h-BN-ZrO2: Enhanced Mechanical Performances and In Vivo Toxicity Study for Biomedical Applications

Due to excellent biocompatibility, bioactivities, and osteoconductivity, hydroxyapatite (HAp) is considered as one of the most suitable biomaterials for numerous biomedical applications. Herein, HAp was fabricated using a bottom-up approach, i.e., a wet chemical method, and its composites with TiC, h-BN, and ZrO2 were fabricated by a solid-state reaction method with enhanced mechanical and biological performances. Structural, surface morphology, and mechanical behavior of the fabricated composites were characterized using various characterization techniques. Furthermore, transmission electron microscopy study revealed a randomly oriented rod-like morphology, with the length and width of these nanorods ranging from 78 to 122 and from 9 to 13 nm. Moreover, the mechanical characterizations of the composite HZBT4 (80HAp-10TiC-5h-BN-5ZrO2) reveal a very high compressive strength (246 MPa), which is comparable to that of the steel (250 MPa), fracture toughness (14.78 MPa m1/2), and Young's modulus (1.02 GPa). In order to check the biocompatibility of the composites, numerous biological tests were also performed on different body organs of healthy adult Sprague-Dawley rats. This study suggests that the composite HZBT4 could not reveal any significant influence on the hematological, serum biochemical, and histopathological parameters. Hence, the fabricated composite can be used for several biological applications, such as bone implants, bone grafting, and bone regeneration.

Creating amphiphilic porosity in two-dimensional covalent organic frameworks via steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation

Creating different pore environments within a covalent organic framework (COF) will lead to useful multicompartment structure and multiple functions, which however has been scarcely achieved. Herein we report designed synthesis of three two-dimensional COFs with amphiphilic porosity by steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation. Dictated by the different steric effect of the substituents introduced to a monomer, dual-pore COFs with kgm net, in which all hydroxyls locate in trigonal micropores while hydrophobic sidechains exclusively distribute in hexagonal mesopores, have been constructed to form completely separated hydrophilic and hydrophobic nanochannels. The unique amphiphilic channels in the COFs enable the formation of Janus membranes via interface growth. This work has realized the creation of two types of channels with opposite properties in one COF, demonstrating the feasibility of introducing different properties/functions into different pores of heteropore COFs, which can be a useful strategy to develop multifunctional materials.

3D-printed tri-element-doped hydroxyapatite/ polycaprolactone composite scaffolds with antibacterial potential for osteosarcoma therapy and bone regeneration

The resection of malignant osteosarcoma often results in large segmental bone defects, and the residual cells can facilitate recurrence. Consequently, the treatment of osteosarcoma is a major challenge in clinical practice. The ideal goal of treatment for osteosarcoma is to eliminate it thoroughly, and repair the resultant bone defects as well as avoid bacterial infections. Herein, we fabricated a selenium/strontium/zinc-doped hydroxyapatite (Se/Sr/Zn-HA) powder by hydrothermal method, and then employed it with polycaprolactone (PCL) as ink to construct composite scaffolds through 3D printing, and finally introduced them in bone defect repair induced by malignant osteosarcoma. The resultant composite scaffolds integrated multiple functions involving anti-tumor, osteogenic, and antibacterial potentials, mainly attributed to the anti-tumor effects of SeO32-, osteogenic effects of Sr2+ and Zn2+, and antibacterial effects of SeO32- and Zn2+. In vitro studies confirmed that Se/Sr/Zn-HA leaching solution could induce apoptosis of osteosarcoma cells, differentiation of MSCs, and proliferation of MC3T3-E1 while showing excellent antibacterial properties. In vivo tests demonstrated that Se/Sr/Zn-HA could significantly suppress tumors after 8 days of injection, and the Se/Sr/Zn-HA-PCLs scaffold repaired femoral defects effectively after 3 months of implantation. Summarily, the Se/Sr/Zn-HA-PCLs composite scaffolds developed in this study were effective for tumor treatment, bone defect repair, and post-operative anti-infection, which provided a great potential to be a facile therapeutic material for osteosarcoma resection.

Hydroxyapatite microspheres used as a drug delivery system for gliosarcoma strain 9l/Lacz treatment by photodynamic therapy protocols

BACKGROUND

Hydroxyapatite (HAp) presents similarities with the human bone structure and presents properties such as biodegradability, biocompatibility, and osteoconductivity, which favors its use in prostheses implants and enables its use as a vehicle for the delivery of photosensitizers (PS) from systems of release (DDS) for photodynamic therapy applications Methods: In this work was to synthesized hydroxyapatite microspheres (meHAp), encapsulated with chloroaluminium phthalocyanine (ClAlPc), for DDS. meHAp was synthesized using vaterite as a template. The drug was encapsulated by mixing meHAp and a 50.0 mg.mL-1 ClAlPc solution. Photochemical, photophysical, and photobiological studies characterized the system.

RESULTS

The images from the SEM analysis showed the spherical form of the particles. All spectroscopic results showed excellent photophysical parameters of the drug studied when served in the meHAp system. The incorporation efficiency was 57.8 %. The trypan blue exclusion test results showed a significant reduction (p < 0.05) in cell viability for the groups treated with PDT at all concentrations above 250 μg.mL-1. In 9 L/lacZ gliosarcoma cells, PDT mediated at concentrations from 250 to 62.5 µg.mL-1 reduced cell viability by more than 98 %. In the cell internalization study, it was possible to observe the internalization of phthalocyanines at 37 °C, with the accumulation of PS in the cytoplasm and inside the nucleus in the two tested concentrations.

CONCLUSIONS

From all the results presented throughout the article, the meHAp system shows promise for use as a modified release system (DSD) in photodynamic therapy.

Sequential Dual-Biofactor Release from the Scaffold of Mesoporous HA Microspheres and PLGA Matrix for Boosting Endogenous Bone Regeneration

The combined design of scaffold structure and multi-biological factors is a prominent strategy to promote bone regeneration. Herein, a composite scaffold of mesoporous hydroxyapatite (HA) microspheres loaded with the bone morphogenetic protein-2 (BMP-2) and a poly(DL-lactic-co-glycolic acid) (PLGA) matrix is constructed by 3D printing. Furthermore, the chemokine stromal cell-derived factor-1α (SDF-1α) is adsorbed on a scaffold surface to achieve the sequential release of the dual-biofactors. The results indicate that the rapid release of SDF-1α chemokine on the scaffold surface effectively recruits bone marrow-derived mesenchymal stem cells (BMSCs) to the target defect area, whereas the long-term sustained release of BMP-2 from the HA microspheres in the degradable PLGA matrix successfully triggers the osteogenic differentiation in the recruited BMSCs, significantly promoting bone regeneration and reconstruction. In addition, these structures/biofactors specially combining scaffold exhibit significantly better biological performance than that of other combined scaffolds, including the bare HA/PLGA scaffold, the scaffold loaded with SDF-1α or BMP-2 biofactor alone, and the scaffold with surface SDF-1α and BMP-2 dual-biofactors. The utilization of mesoporous HA, the assembly method, and sequential release of the two biofactors in the 3D printed composite scaffold present a new method for future design of high-performance bone repairing scaffolds.

Strontium and simvastatin dual loaded hydroxyapatite microsphere reinforced poly(ε-caprolactone) scaffolds promote vascularized bone regeneration

The promotion of vascular network formation in the early stages of implantation is considered a prerequisite for successful functional bone regeneration. In this study, we successfully constructed 3D printed scaffolds with strong mechanical strength and a controllable pore structure that can sustainably release strontium (Sr) ions and simvastatin (SIM) for up to 28 days by incorporation of Sr²⁺ and SIM-loaded hydroxyapatite microspheres (MHA) into a poly(ε-caprolactone) (PCL) matrix. In vitro cell experiments showed that Sr-doped scaffolds were beneficial to the proliferation and osteogenic differentiation of bone mesenchymal stem cells (BMSCs), an appropriate dose of SIM was beneficial to cell proliferation and angiogenesis, and a high dose of SIM was cytotoxic. The Sr- and SIM-dual-loaded scaffolds with an appropriate dose significantly induced osteogenic differentiation of BMSCs and tube formation of human umbilical vein endothelial cells (HUVECs) in vitro and promoted vascular network and functional bone formation in vivo. Ribose nucleic acid (RNA) sequencing analysis suggested that the mechanism of promotion of vascularized bone regeneration by fabricated scaffolds is that dual-loaded Sr²⁺ and SIM can upregulate osteogenic and vasculogenic-related genes and downregulate osteoclast-related genes, which is beneficial for vascular and new bone regeneration. The 3D printed composite scaffolds loaded with high-stability and low-cost inorganic Sr²⁺ ions and SIM small-molecule drugs hold great promise in the field of promoting vascularized bone regeneration.

Biomineralization of bone tissue: calcium phosphate-based inorganics in collagen fibrillar organic matrices

Background

Bone regeneration research is currently ongoing in the scientific community. Materials approved for clinical use, and applied to patients, have been developed and produced. However, rather than directly affecting bone regeneration, these materials support bone induction, which regenerates bone. Therefore, the research community is still researching bone tissue regeneration. In the papers published so far, it is hard to find an improvement in the theory of bone regeneration. This review discusses the relationship between the existing theories on hard tissue growth and regeneration and the biomaterials developed so far for this purpose and future research directions.

Mainbody

Highly complex nucleation and crystallization in hard tissue involves the coordinated action of ions and/or molecules that can produce different organic and inorganic composite biomaterials. In addition, the healing of bone defects is also affected by the dynamic conditions of ions and nutrients in the bone regeneration process. Inorganics in the human body, especially calcium- and/or phosphorus-based materials, play an important role in hard tissues. Inorganic crystal growth is important for treating or remodeling the bone matrix. Biomaterials used in bone tissue regeneration require expertise in various fields of the scientific community. Chemical knowledge is indispensable for interpreting the relationship between biological factors and their formation. In addition, sources of energy for the nucleation and crystallization processes of such chemical bonds and minerals that make up the bone tissue must be considered. However, the exact mechanism for this process has not yet been elucidated. Therefore, a convergence of broader scientific fields such as chemistry, materials, and biology is urgently needed to induce a distinct bone tissue regeneration mechanism.

Conclusion

This review provides an overview of calcium- and/or phosphorus-based inorganic properties and processes combined with organics that can be regarded as matrices of these minerals, namely collagen molecules and collagen fibrils. Furthermore, we discuss how this strategy can be applied to future bone tissue regenerative medicine in combination with other academic perspectives.

Microwave-Assisted Hydrothermal Rapid Synthesis of Ultralong Hydroxyapatite Nanowires Using Adenosine 5'-Triphosphate

Ultralong hydroxyapatite (HAP) nanowires are promising for various biomedical applications owing to their chemical similarity to the inorganic constituent of bone, high biocompatibility, good flexibility, excellent mechanical properties, etc. However, it is still challenging to control the formation of ultralong HAP nanowires because of the presence of free PO₄³⁻ ions in the reaction system containing the inorganic phosphate source. In addition, it takes a long period of time (usually tens of hours) for the synthetic process of ultralong HAP nanowires. Herein, for the first time, we have developed an eco-friendly calcium oleate precursor microwave hydrothermal method using biocompatible adenosine 5′-triphosphate (ATP) as a bio-phosphorus source and water as the only solvent for the rapid synthesis of ultralong HAP nanowires. The controllable hydrolysis of ATP can avoid the premature formation of calcium phosphate nuclei and uncontrollable crystal growth. Microwave heating can significantly shorten the synthetic time from tens of hours required by the traditional heating to 1 h, thus achieving high efficiency, energy saving and low cost. The as-prepared ultralong HAP nanowires with high flexibility have lengths of several hundred micrometers and diameters of 10~20 nm, and they usually self-assemble into nanowire bundles along their longitudinal direction. The as-prepared ultralong HAP nanowire/chitosan porous scaffold has excellent bioactivity, good biodegradation and cytocompatibility owing to the bioactive adenosine adsorbed on the surface of ultralong HAP nanowires. It is expected that ultralong HAP nanowires will be promising for various applications in the biomedical fields, such as bone defect repair, skin wound healing, and as a drug nanocarrier.

Hydroxypropylmethylcellulose as a film and hydrogel carrier for ACP nanoprecursors to deliver biomimetic mineralization

Demineralization of hard tooth tissues leads to dental caries, which cause health problems and economic burdens throughout the world. A biomimetic mineralization strategy is expected to reverse early dental caries. Commercially available anti-carious mineralizing products lead to inconclusive clinical results because they cannot continuously replenish the required calcium and phosphate resources. Herein, we prepared a mineralizing film consisting of hydroxypropylmethylcellulose (HPMC) and polyaspartic acid-stabilized amorphous calcium phosphate (PAsp-ACP) nanoparticles. HPMC which contains multiple hydroxyl groups is a film-forming material that can be desiccated to form a dry film. In a moist environment, this film gradually changes into a gel. HPMC was used as the carrier of PAsp-ACP nanoparticles to deliver biomimetic mineralization. Our results indicated that the hydroxyl and methoxyl groups of HPMC could assist the stability of PAsp-ACP nanoparticles and maintain their biomimetic mineralization activity. The results further demonstrated that the bioinspired mineralizing film induced the early mineralization of demineralized dentin after 24 h with increasing mineralization of the whole demineralized dentin (3-4 µm) after 72-96 h. Furthermore, these results were achieved without any cytotoxicity or mucosa irritation. Therefore, this mineralizing film shows promise for use in preventive dentistry due to its efficient mineralization capability.

Vancomycin Hydrochloride Loaded Hydroxyapatite Mesoporous Microspheres with Micro/Nano Surface Structure to Increase Osteogenic Differentiation and Antibacterial Ability

As infection induced by the implant will lead to operation failure, the implant material must be endowed with certain antibacterial properties. Hydroxyapatite (HA) mesoporous microspheres have been widely used in bone repair due to their advantages, including simple synthesis, good osteogenic properties and drug loading capacity. In this study, vancomycin hydrochloride-loaded mesoporous hydroxyapatite microspheres with micro/nanosurface structures were synthesized to increase osteogenic differentiation and antibacterial ability. Phytic acid (IP6) was used as a template to prepare mesoporous hydroxyapatite microspheres composed of fibres, flakes and smooth surfaces by the hydrothermal homogeneous precipitation method, and the corresponding specific surface areas were 65.20 m²/g, 75.13 m²/g and 71.27 m²/g, respectively. Vancomycin hydrochloride (Van) was used as the drug model to study the drug loading and release characteristics of the microspheres, as well as the in vitro antibacterial properties after treatment. In addition, during cocultivation with MC3T3-E1 preosteoblasts, HA microspheres assembled via flakes exhibited better cell compatibility, which promoted cell proliferation, alkaline phosphatase (ALP) activity, and the formation of calcium nodules and increased the expression of osteogenic differentiation-related proteins such as Runx-2, osteopontin (OPN) and collagen I (COL I). These results indicated that the HA microspheres prepared in this experiment have broad application prospects in drug delivery systems and bone repair.

Rapid conversion of highly porous borate glass microspheres into hydroxyapatite

This paper reports on the rapid development of porous hydroxyapatite (HA) microspheres with large external pores and fully interconnected porosity. These porous microspheres were produced by converting borates glasses (namely 45B5, B53P4 and 13-93B) into HA by immersing them in potassium phosphate media and simulated body fluid (SBF). Solid (SGMS) non-porous and highly porous (PGMS) microspheres were prepared from borate glasses via a novel flame spheroidisation process and their physicochemical properties including in vitro biological response were investigated. Morphological and physical characterisation of the PGMS showed interconnected porosity (up to 75 ± 5%) with average external pore sizes of 50 ± 5 μm. Mass loss, ion release, X-ray diffraction (XRD) and Scanning electron microscopy (SEM) analysis confirmed complete conversion to HA in 0.02 M K2HPO4 solution for the PGMS (with exception of 13-93B glass) and at significantly faster rates compared to their SGMS counterparts. However, 13-93B microspheres only converted to HA in Na2HPO4 solution. The in vitro SBF bioactivity studies for all the borate compositions showed HA formation and much earlier for PGMS compared to SGMS. Direct cell culture studies using hMSCs revealed that the converted porous HA microspheres showed enhanced pro-osteogenic properties compared to their unconverted counterparts and such are considered as highly promising candidate materials for bone repair (and orthobiological) applications.

Effect of sprayed techniques on the surface microstructure and in vitro behavior of nano-HAp coatings

Supersonic atmospheric plasma spray (SAPS) technique is a classical method which is employed to coat the carbon/carbon (C/C) composites by nano-hydroxyapatite (HAp) powders to decrease the biologically inert, hydrophobic drawbacks of substrate surfaces. In recent years, profiting from the promoting of energy conservation and environmental protection, more emphasis was placed on industrial manufacturing to simplify the experimental steps. This paper aims to study the preparation of nano-HAp coatings by suspension plasma spray (SPS) instead of the original SAPS technique. A denser, more uniform and less defective coating is successfully fabricated on C/C substrate using SPS technique. More important, fewer surface flaws in SPS coating could be observed by scanning electron microscopy (SEM) which shows that the large drawbacks of the coating have disappeared during spraying process. Meanwhile, except for HAp, phase compositions of the SPS coating appear with slight calcium oxide (CaO, 0.8%) and tricalcium phosphate (TCP, 30.7%), and then all CaO as well as TCP phases transform into dicalcium phosphate anhydrous (DCPA, 60.6%) after microwave-hydrothermal (MH) treatment. Thermal analysis (TG/DSC) reveals that SPS coating (97.51%) has a higher thermal stability than that of the SAPS coating (82.37%). Also, in comparison, the SPS coating after MH treatment (SPS-MH coating) exhibits better thermal properties (92.76%). In addition, compared to the SAPS and SPS coatings, due to the more flaw reduction and phase transformation, SPS-MH coating shows a better biological properties according to the surface microstructure in simulation body fluid (SBF) solution and cell spreading area on coating. The highest corrosion resistance with the current density of 3.9798 × 10^-7 A/cm² and a potential of 0.0419 V is achieved for SPS-MH coating.

Microwave processing of calcium phosphate and magnesium phosphate based orthopedic bioceramics: A state-of-the-art review

The main theme of this paper is to review microwave-assisted synthesis and processing of calcium and magnesium phosphate bioceramics. Microwave processing of advanced materials has been an active field of research for the last three decades and has been already reviewed in the literature. Microwave processing of bioceramics is being pursued for almost the same period of time. Unfortunately, to the best of our knowledge, we are not aware of any comprehensive review in the literature. Our group has been a significant contributor to the field, and we feel that it is an appropriate time for reviewing the state-of-the-art of the field. The paper is divided into several sections. After rationalizing the motivation behind writing this paper in the introduction, the second section builds on some fundamental aspects of microwave-matter interactions. The third section, representing the synthesis aspects, is subdivided into five sub-sections focusing on various calcium and magnesium phosphates in both crystalline and amorphous forms. The fourth section focuses on magnesium phosphate-based bioceramics. The fifth and the sixth section describe results on the utility of microwave assistance in developing multi-functional coatings on medical implants and orthopedic cements respectively. The subsequent section reviews results on microwave sintering of calcium and magnesium phosphates. The paper concludes with remarks on unresolved issues and future directions of research. It is expected that this comprehensive review on the interdisciplinary topic will further propel the exploration of other novel applications of microwave technology in processing biomaterials by a diverse group of scientists and engineers. STATEMENT OF SIGNIFICANCE: 1. This review highlights the broad-spectrum capabilities of microwave applications in processing orthopedic bioceramics. 2. The article covers "processing" in the broadest sense of the word, comprising of material synthesis, sintering, coating formation, and setting of orthopedic cements. It also expands beyond conventional calcium phosphates to include the emergent family of magnesium phosphates. 3. In vitro/in vivo responses of microwave-processed bioceramics are discussed thus providing an integral understanding of biological aspects of these materials. 4. The comprehensive review on this interdisciplinary topic will help researchers in various disciplines to appreciate the significance and usefulness of microwaves in biomaterials processing. Further, we also believe that it will propel the exploration of other novel applications of microwave technology in the biomaterials sector.

Thermal and microwave synthesized SPIONs: Energy effects on the efficiency of nano drug carriers

Superparamagnetic iron oxide nanoparticles (SPIONs) were optimally synthesized employing two energy sources viz. thermal and microwave using low temperature co-precipitation process. Both methods yielded particles with optimum physicochemical properties for biomedical applications like smaller size (~6--7 nm), narrow size distribution (standard deviation ~1.6-1.7 nm) and good magnetic parameters (saturation magnetisation ~53 emu/g at 9 T). Simplified process made use of domestic oven. After coating by amino acid serine, successful loading (>8 wt%) of drug Doxorubicin was achieved for both SPIONs. Microwave sample showed equivalently efficient drug loading despite half the serine coating. Findings were confirmed by various techniques like X-ray diffraction (XRD), transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM) and thermo gravimetric analysis (TGA) etc. Differences in thermal homogeneities and efficiency of heat transfer between two energy modes affected the properties of synthesized SPIONs. Differences were observed in amount of serine coating, drug release behaviour and in vitro experiments on A549 cells like internalisation and cell viability data. About 59 and 39% pH and time dependent drug release at pH 5 was obtained for thermal and microwave sample respectively. In vitro experiments confirmed the successful internalisation and cell death, supporting the suitability of SPIONS as efficient targeted drug carriers. Despite lesser drug release, microwave sample showed comparable in vitro results. Study emphasizes the role and importance of energy in affecting the efficiency and functional behaviour of SPIONs as nano drug carriers. Being biocompatible and magnetic these particles can be applied successfully as efficient targeted drug delivery agents.

Designed Fabrication of Polymer-Mediated MOF-Derived Magnetic Hollow Carbon Nanocages for Specific Isolation of Bovine Hemoglobin

It is highly required to develop well-designed separation materials for the specific isolation of certain proteins in proteomic research. Herein, the new type of metal-organic framework (MOF)-derived polymer-mediated magnetic hollow nanocages was fabricated via stress-induced orientation contraction, which was further applied for specific enrichment of proteins. The core-shell nanocomposites comprised of polymer-mediated ZIF-67 cores and polydopamine (PDA) shells, after annealing, generated magnetic hollow carbon nanocages with hierarchical pores and structures. Particularly, the magnetic carbonized PDA@F127/ZIF-67 hollow nanocages exhibited a remarkable adsorption capacity toward bovine hemoglobin (BHB) up to 834.3 mg g^-1, which was significantly greater than that of the directed carbonized ZIF-67 nanoparticles. The results also exhibited the notable specificity of the obtained nanocages on complex biosamples, including intact mixed proteins and fetal calf serum. The hierarchically hollow porous structure greatly improves the specific surface area and reduces the mass transfer resistance, leading to enhanced high adsorption for target protein BHB. This novel method will be promising for the applications in purification and enrichment of biomacromolecules for complex biosamples, which successfully solve the problem of low adsorption efficiency and tedious separating process of the previous MOF-derived materials.

Biomolecule-assisted green synthesis of nanostructured calcium phosphates and their biomedical applications

Calcium phosphates (CaPs) are ubiquitous in nature and vertebrate bones and teeth, and have high biocompatibility and promising applications in various biomedical fields. Nanostructured calcium phosphates (NCaPs) are recognized as promising nanocarriers for drug/gene/protein delivery owing to their high specific surface area, pH-responsive degradability, high drug/gene/protein loading capacity and sustained release performance. In order to control the structure and surface properties of NCaPs, various biomolecules with high biocompatibility such as nucleic acids, proteins, peptides, liposomes and phosphorus-containing biomolecules are used in the synthesis of NCaPs. Moreover, biomolecules play important roles in the synthesis processes, resulting in the formation of various NCaPs with different sizes and morphologies. At room temperature, biomolecules can play the following roles: (1) acting as a biocompatible organic phase to form biomolecule/CaP hybrid nanostructured materials; (2) serving as a biotemplate for the biomimetic mineralization of NCaPs; (3) acting as a biocompatible modifier to coat the surface of NCaPs, preventing their aggregation and increasing their colloidal stability. Under heating conditions, biomolecules can (1) control the crystallization process of NCaPs by forming biomolecule/CaP nanocomposites before heating; (2) prevent the rapid and disordered growth of NCaPs by chelating with Ca2+ ions to form precursors; (3) provide the phosphorus source for the controlled synthesis of NCaPs by using phosphorus-containing biomolecules. This review focuses on the important roles of biomolecules in the synthesis of NCaPs, which are expected to guide the design and controlled synthesis of NCaPs. Moreover, we will also summarize the biomedical applications of NCaPs in nanomedicine and tissue engineering, and discuss their current research trends and future prospects.

Protein adsorption characteristics of nanoparticle-assembled hollow microspheres of hydroxyapatite and their composites with PLLA microporous membranes

Nanoparticle-assembled hydroxyapatite (HA) hollow microspheres have a high surface area and are convenient to handle, owing to their characteristic structure. In this study we characterized the protein adsorption of HA hollow microspheres prepared from CaCl₂ and K₂HPO₄ by a water-in-oil-in-water (W/O/W) emulsion method assisted by two surfactants: Span 80 and Tween 20. The HA hollow microspheres adsorbed bovine serum albumin, bovine γ-globulin, equine skeletal muscle myoglobin, and chicken egg white lysozyme in 10 mM sodium phosphate buffer (pH 6.8) in a Langmuir-type adsorption and desorbed the proteins in 800 mM sodium phosphate buffer (pH 6.8). The maximum adsorbed amounts of the HA hollow microspheres were 7.5–9.0 times higher than those of the microrods with a similar size range. The composite membranes of the HA microspheres and the poly(l-lactic acid) (PLLA) microporous membranes exhibited a high adsorption capacity for γ-globulin.

Release Behavior of Folic Acid Grafted Hollow Hydroxyapatite as Drug Carrier

Based on the formation of carbodiimide compounds between carboxyl and primary amines, hollow microspheres arising from the folic acid (folate-FA) grafted onto the surface of the modified hydroxyapatite were successfully prepared. The hollow morphology and composition of the FA-grafted hydroxyapatite microspheres were confirmed by scanning electron microscopy (SEM) and other characterizations. Brunauer-Emmett-Teller (BET) assay revealed the specific surface area and average pore size of the microspheres were 34.58m2/g and 17.80 nm, respectively. As a drug carrier, the kinetic investigation of doxorubicin (DOX) loaded shows that the adsorbed behavior of drug on the adsorbent is more suitable to be described with pseudo-first-order model. Furthermore, the release rate can reach 83% at pH 5.7, which is greater than the release of 39% at pH 7.4, indicating an excellent performance of controlled drug release for response pH. The release mechanism of DOX coincides with Fickian diffusion as a result of Korsmeyer-Peppas model analysis and the release phenomena can be well explained by Fickian diffusion second law.

Nanostructured Calcium-based Biomaterials and their Application in Drug Delivery

In the past several decades, various types of nanostructured biomaterials have been developed. These nanostructured biomaterials have promising applications in biomedical fields such as bone repair, tissue engineering, drug delivery, gene delivery, antibacterial agents, and bioimaging. Nanostructured biomaterials with high biocompatibility, including calcium phosphate, hydroxyapatite, and calcium silicate, are ideal candidates for drug delivery. This review article is not intended to offer a comprehensive review of the nanostructured biomaterials and their application in drug delivery but rather presents a brief summary of the recent progress in this field. Our recent endeavors in the research of nanostructured biomaterials for drug delivery are also summarized. Special attention is paid to the synthesis and properties of nanostructured biomaterials and their application in drug delivery with the use of typical examples. Finally, we discuss the problems and future perspectives of nanostructured biomaterials in the drug delivery field.

Large-scale and fast synthesis of nano-hydroxyapatite powder by a microwave-hydrothermal method

A microwave-hydrothermal (M-H) method assisted with ultrasonic atomization precipitation was developed for large-scale and fast synthesis of nano-hydroxyapatite (nano-HAP) powder. This technology combines the uniform mixing effect of ultrasonic atomization precipitation at high concentration with the rapid and uniform heating effect of the M-H method, aiming to obtain a high quality product with low agglomeration, homogeneous size distribution, accurate stoichiometry, and high purity while improving the yield. The influences of reaction temperature, reaction time and reactant concentration on the formation of nano-HAP were investigated. The results show that the crystallinity increases significantly and the diameter of nano-HAP increases to some extent, but the length does not change obviously while the reaction temperature increase from 60 °C to 160 °C and the reaction time increases from 1 minute to 40 minutes respectively. The crystallinity, dispersion and crystal size of nano-HAP do not change obviously while the concentration of Na₂HPO₄·12H₂O increases from 0.06 mol L⁻¹ to 0.4 mol L⁻¹. When the reaction temperature is 160 °C, the reaction time is 40 min, and the concentration of Na₂HPO₄·12H₂O is 0.4 mol L⁻¹, the yield of nano-HAP powder achieved a maximum yield (0.033 kg L⁻¹). The obtained nano-HAP powder exhibits a uniform size and good dispersibility, with a size of 87.62 ± 22.44 nm and crystallinity of 0.92, respectively. This study indicates that the M-H method assisted with ultrasonic atomization precipitation is a facile one-pot method for the rapid and large-scale synthesis of highly crystalline, dispersible nano-HAP particles.

The obtained nano-HAP still has high crystallinity, uniform size and good dispersibility when the concentration of Na₂HPO₄ is 0.4 mol L⁻¹.

Construction of a micro/nano structured surface on a β-TCP/CaSiO3 bioceramic promotes osteogenic differentiation of mBMSCs

We report a simple and practical process to construct surface structures with water as the only reagent system; the additive-free system provides regulated structures with few defects and impurities.

Cellulose/vaterite nanocomposites: Sonochemical synthesis, characterization, and their application in protein adsorption

Vaterite is recognized as an important biomedical material owing to its features such as high specific surface area, high solubility, high dispersion, and small specific gravity. Herein, we report a facile and green sonochemical route to prepare vaterite nanospheres (assembled from rice-shaped nanoparticles) with average diameter of 206-246 nm by using cellulose as substrate. The important role of cellulose concentration on the phase of the products was systematically investigated, and the formation mechanism of vaterite was proposed. Moreover, the as-prepared cellulose/vaterite nanocomposites have a good cytocompatibility and a relatively high protein adsorption ability using hemoglobin as a model protein. These results indicate that the as-prepared cellulose/vaterite nanocomposites are promising for applications in biomedical fields, such as protein adsorption.

Mesoporous and hollow hydroxyapatite nanostructured particles as a drug delivery vehicle for the local release of ibuprofen

The high risk of infection caused by implantation of orthopedic bio-metals is still a daunting challenge for surgeons as it can lead to implant failure. One approach to overcome this issue is the local release of antibacterial drug through coating on the surface of a metallic implant. One ideal carrier for this purpose is hydroxyapatite (HA) particles which are bioactive, biodegradable, biocompatible and have the potential to bond to bone. In the current study, highly crystalline mesoporous HA nanostructure particles were successfully synthesized in a low-temperature solvent process with the aid of an inorganic CaCO₃ template and then fully characterized. The specific surface area and the average size of the cavities of the nanostructured mesoporous HA particles were 85 m²/g and 20 nm, respectively. The feasibility of the prepared HA mesoporous nanostructures for drug delivery, using ibuprofen as a model drug, was also investigated. The as-prepared HA mesoporous nanostructures showed a high drug-loading capacity, as well as sustained drug release in a phosphate buffered saline (PBS) at a pH of 7.4. Overall, results show that HA mesoporous nanostructures gave great potential in bone regeneration and local delivery of either drugs or biomolecules.

Sonochemical synthesis of cellulose/hydroxyapatite nanocomposites and their application in protein adsorption

Hydroxyapatite (HA) is the main mineral constituent in the hard tissue of vertebrate, which is recognized as an important biomedical material owing to its excellent bioactivity and biocompatibility. Herein, we report a facile and green sonochemical route for the rapid synthesis of cellulose/HA nanocomposites in NaOH/urea aqueous solution. The in vitro behavior of the cellulose/HA nanocomposites was studied to evaluate the biological response of the nanocomposites following immersion in simulated body fluid for various periods (maximum of 28 days). The HA crystals formed on the surface of the nanocomposites were carbonate-containing apatite, which is similar to the naturally occurring calcium phosphate materials. The HA nanosheets (assembly of nanorods) were mineralized on the surface of the nanocomposites, and maximum mass of the nanocomposites was reached 1.82 times of initial mass after 28 days of soaking. Moreover, the as-prepared cellulose/HA nanocomposites have good cytocompatibility, and show a relatively high protein adsorption ability using hemoglobin as a model protein. These results indicate that the as-prepared cellulose/HA nanocomposites are promising for applications in various biomedical fields such as tissue engineering and protein/drug delivery.

Enhancement of tendon‑bone healing following rotator cuff repair using hydroxyapatite with TGFβ1

The formation of fibrocartilage at the healing site following a rotator cuff tear repair is a major problem in the field of tendon-bone healing. The present study aimed to enhance the healing of the tendon-bone interface following rotator-cuff tear repair by the interposition of hydroxyapatite (HA) encapsulated with transforming growth factor β1 (TGFβ1). Using an acute rotator cuff repair model, rats were divided into three groups: i) Repair only (control); ii) HA group; and iii) HA-TGFβ1 group. Animals were sacrificed at 2, 4 and 8 weeks following surgery. Micro-computed tomography (CT), histomorphometric analyses and biomechanical tests were used to evaluate the supraspinatus tendon-bone complex. The micro-CT images revealed notable novel bone formation in the groups treated with HA-TGFβ1. The histomorphometric analyses demonstrated improved fibrocartilage formation and collagen organization at the tendon-bone interface. The HA-TGFβ1 combination significantly improved the area of fibrocartilage, particularly at early time points (2 and 4 weeks). There was a significantly greater load-to-failure force achieved in the HA and HA-TGFβ1 groups compared with the control group at 4 and 8 weeks. Augmentation of the ceramic powder with HA-TGFβ1 at the tendon-bone interface was demonstrated to strengthen the healing entheses, increase bone and fibrocartilage formation and improve collagen organization compared with surgical repair alone. Local application of HA-TGFβ1 demonstrates potential in improving tendon-bone healing following rotator cuff repair.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Bio-sourced phosphoprotein-based synthesis of silver-doped macroporous zinc phosphates and their antibacterial properties

The usual sources of phosphorus for metal phosphates are obtained from phosphate rocks, of which resources are depleted. As a substitute for these mineral sources, an original method of synthesis has been developed to prepare macroporous zinc phosphates using casein phosphoprotein. This bio-sourced reactant plays during the synthesis the roles of both a phosphorus source and a reducing agent for silver nanoparticles. Thus, zinc phosphates loaded with different Ag contents (up to 6.4 wt%) are prepared via hydrothermal treatment at 100 °C. Silver nanoparticles co-crystallized with hopeite, Zn₃(PO₄)₂ and/or Zn₂P₂O₇. In addition, casein induces porosity within the zinc phosphate framework and provides macropores (diameter of >50 nm) during calcination. The antibacterial properties against Escherichia coli K12 bacteria of Ag-containing and Ag-free porous zinc phosphates (calcined at 750 °C) were also tested for the first time.

Phosphoproteins as key reactants in an original method of synthesis of silver-doped macroporous zinc phosphates with antibacterial properties.

One-pot synthesis of arginine modified hydroxyapatite carbon microsphere composites for efficient removal of U(VI) from aqueous solutions

Uranium was not only the main source of nuclear energy but also one of the long-lived radionuclide. Herein, a novel arginine modified hydroxyapatite carbon microsphere composites (defined as C@HAp/Arg) obtained promptly via a one-step mild hydrothermal method, was applied to remove U(VI) from aqueous solutions. Based on the characterization of transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), the synthesized C@HAp/Arg presented globular morphology and abundant functional groups (e.g., COO^-), which were beneficial to its combination with U(VI). The interaction mechanism and removal capability of U(VI) on C@HAp/Arg were studied by batch adsorption technique and spectroscopy analysis. The results implied that U(VI) can form strong surface complexes on C@HAp/Arg. The kinetics adsorption of U(VI) followed pseudo-second-order kinetic model with high removal efficiency (∼95% within 5h at pH 5.0). The adsorption isotherms were well fitted by Langmuir model, implying that U(VI) uptake on C@HAp/Arg was monolayer coverage. It was found that the maximum adsorption capacities of CSs, C@HAp and C@HAp/Arg toward U(VI) were calculated to be 23.16, 72.09 and 569.66mg/g, respectively, at 298.15K and pH 5.0, and thermodynamic parameters revealed that the adsorption processes of U(VI) were spontaneous and endothermic. In addition, effect of co-existed ions and CO₃^2- concentrations demonstrated that U(VI) adsorption on C@HAp/Arg was weakly interfered by foreign ions and carbonate concentrations. More importantly, the adsorption performance of U(VI) on C@HAp/Arg was still over ∼87% after five cycles. Therefore, it was noted that the versatile C@HAp/Arg could be potentially used as a powerful building block for the enrichment and disposal of U(VI) from aqueous solutions, which could efficiently reduce the potential toxicity of U(VI) in the U(VI)-contaminated water.

Nanomaterials for treating cardiovascular diseases: A review

Nanomaterials such as nanostructured surfaces, nanoparticles, and nanocomposites represent new viable sources for future therapeutics for cardiovascular diseases. The special properties of nanomaterials such as their intrinsic physiochemical properties, surface energy and surface topographies could actively enhance desirable cellular responses within the cardiovascular system, projecting a growing potential for clinical translation. Recent progress on nanomaterials opened up new opportunities for treating cardiovascular diseases. Successful translation of nanomaterials into cardiovascular applications requires a comprehensive understanding of both nanomaterials and biomedicine, and, thus, it is critical to stress current advancements on both sides. In this review, the authors introduced crucial fabrication techniques for promising nanomaterials for cardiovascular applications. This review highlighted the key elements to consider for their fabrication, properties and applications. The important concerns relevant to cardiovascular nanomaterials, such as cellular responses to nanomaterials and the toxicity of nanomaterials, are also discussed. This review provided an overview of necessary knowledge and key concerns on nanomaterials specific for treating cardiovascular diseases, from the perspectives of both material science and biomedicine.

•

Reviewed current progress of nanomaterials and their cardiovascular applications.

•

Mainly focused on nanostructured surfaces, nanoparticles and nanocomposites.

•

Discussed important topics of nanomaterials for cardiovascular applications.

•

Comparatively reviewed the fabrication of nanomaterials.

•

Informative to researchers in the field of biomaterials and nanomaterials.

Yolk @ cage-Shell Hollow Mesoporous Monodispersion Nanospheres of Amorphous Calcium Phosphate for Drug Delivery with High Loading Capacity

In this paper, yolk-shell hollow nanospheres of amorphous calcium phosphate (ACP) are prepared, and its loading capacity is investigated by comparing with that of solid-shell hollow structure ACP and cage-shell hollow structure ACP. Results show that the products are yolk @ cage-shell of ACP with large shell's pores size (15-40 nm) and large cavity volume. Adsorption results show that the loading capacity of yolk @ cage-shell hollow spherical ACP is very high, which is more than twice that of hollow ACP and 1.5 times of cage-like ACP. The main reasons are that the big shell's pore size contributes the large molecular doxorubicin hydrochloride (DOX · HCl) to enter the inner of hollow spheres easier, and the yolk-shell structure provides larger interior space and more adsorption sites for loading drugs.

Biomimetically grown apatite spheres from aggregated bioglass nanoparticles with ultrahigh porosity and surface area imply potential drug delivery and cell engineering applications

Here we communicate the generation of biomimetically grown apatite spheres from aggregated bioglass nanoparticles and the potential properties applicable for drug delivery and cell/tissue engineering. Ion releasing nanoparticulates of bioglass (85%SiO₂-15%CaO) in a mineralizing medium show an intriguing dynamic phenomenon - aggregation, mineralization to apatite, integration and growth into micron-sized (1.5-3μm) spheres. During the progressive ionic dissolution/precipitation reactions, nano-to-micro-morphology, glass-to-crystal composition, and the physico-chemical properties (porosity, surface area, and charge) change dynamically. With increasing reaction period, the apatite becomes more crystallized with increased crystallinity and crystal size, and gets a composition closer to the stoichiometry. The developed microspheres exhibit hierarchical surface nanostructure, negative charge (ς-potential of -20mV), and ultrahigh mesoporosity (mesopore size of 6.1nm, and the resultant surface area of 63.7m²/g and pore volume of 0.153cm³/g) at 14days of mineralization, which are even higher than those of its precursor bioglass nanoparticles. Thanks to these properties, the biomimetic mineral microspheres take up biological molecules effectively, i.e., loading capacity of positive-charged protein is over 10%. Of note, the release is highly sustainable at a constant rate, i.e., profiling almost 'zero-order' kinetics for 4weeks, suggesting the potential usefulness as protein delivery systems. The biomimetic mineral microspheres hold some remnant Si in the core region, and release calcium, phosphate, and silicate ions over the test period, implying the long-term ionic-related therapeutic functions. The mesenchymal stem cells favour the biomimetic spheres with an excellent viability. Due to the merit of sizes (a few micrometers), the spheres can be intercalated into cells, mediating cellular interactions in 3D cell-spheroid engineering, and also can stimulate osteogenic differentiation of cells when incorporated into cell-laden gels. The intriguing properties observed in this study, including biomimetic composition, high mesoporosity, release of therapeutic ions, effective loading and long-term release of proteins, and diverse yet favorable 3D cellular interactions, suggest great potential of the newly developed biomimetic microspheres in biomedical applications, such as drug delivery and cell/tissue engineering.

STATEMENT OF SIGNIFICANCE

This work reports the generation of apatite spheres with a few micrometers in size biomimetically grown from bioactive glass nanoparticles, through a series of intriguing yet unprecedented phenomenon involving aggregation of nanoparticles, mineralization and sphere growth. The mineral microspheres possess some unique physico-chemical properties including mesoporosity, ultrahigh surface area, and therapeutic ionic release. Furthermore, the spheres show excellent loading and delivery capacity of protein molecules, and mediate favorable cellular interactions in 2D and 3D culture conditions, demonstrating a future multifunctional microcarrier platform for the therapeutics delivery and cell/tissue engineering.

Ultralong Hydroxyapatite Nanowires-Based Paper Co-Loaded with Silver Nanoparticles and Antibiotic for Long-Term Antibacterial Benefit

Hydroxyapatite is a kind of biocompatible, environmentally friendly, and versatile inorganic biomaterial. Herein, the preparation of ultralong hydroxyapatite nanowires (HAPNWs)-based antibacterial paper co-loaded with silver nanoparticles (AgNPs) and antibiotic is reported. HAPNWs are used to prepare AgNPs in situ using an aqueous solution containing AgNO₃ under the sunlight without added reducing agent at room temperature. Subsequently, ciprofloxacin (CIP) as an antibiotic is loaded on the HAPNWs@AgNPs. The resultant HAPNWs@AgNPs-CIP paper possesses several unique properties, including high flexibility, high Brunauer-Emmett-Teller (BET) specific surface area (47.9 m² g^-1), high drug loading capacity (447.4 mg g^-1), good biocompatibility, sustained and pH-responsive drug release behavior (5.40-6.75% of Ag⁺ ions and 37.7-76.4% of CIP molecules at pH values of 7.4-4.5 at day 8, respectively), and reusable recycling. In the antibacterial tests against Escherichia coli and Staphylococcus aureus, the HAPNWs@AgNPs-CIP paper exhibits large diameters of inhibition zones and low minimum inhibitory concentrations (30 and 40 μg mL^-1), revealing the high antibacterial activity. Besides, the consecutive agar diffusion tests (8 cycles), long-term stability tests (over 56 days), and continuous contamination tests (5 cycles) demonstrate the excellent recycling performance and long-term antibacterial activity of the HAPNWs@AgNPs-CIP paper. These results indicate a promising potential of the HAPNWs@AgNPs-CIP bactericidal paper for tackling public health issues related to bacterial infections.

Hydroxyapatite Nanowire@Magnesium Silicate Core-Shell Hierarchical Nanocomposite: Synthesis and Application in Bone Regeneration

Multifunctional biomaterials that simultaneously combine high biocompatibility, biodegradability, and bioactivity are promising for applications in various biomedical fields such as bone defect repair and drug delivery. Herein, the synthesis of hydroxyapatite nanowire@magnesium silicate nanosheets (HANW@MS) core-shell porous hierarchical nanocomposites (nanobrushes) is reported. The morphology of the magnesium silicate (MS) shell can be controlled by simply varying the solvothermal temperature and the amount of Mg²⁺ ions. Compared with hydroxyapatite nanowires (HANWs), the HANW@MS core-shell porous hierarchical nanobrushes exhibit remarkably increased specific surface area and pore volume, endowing the HANW@MS core-shell porous hierarchical nanobrushes with high-performance drug loading and sustained release. Moreover, the porous scaffold of HANW@MS/chitosan (HANW@MS/CS) is prepared by incorporating the HANW@MS core-shell porous hierarchical nanobrushes into the chitosan (CS) matrix. The HANW@MS/CS porous scaffold not only promotes the attachment and growth of rat bone marrow derived mesenchymal stem cells (rBMSCs), but also induces the expression of osteogenic differentiation related genes and the vascular endothelial growth factor (VEGF) gene of rBMSCs. Furthermore, the HANW@MS/CS porous scaffold can obviously stimulate in vivo bone regeneration, owing to its high bioactive performance on the osteogenic differentiation of rBMSCs and in vivo angiogenesis. Since Ca, Mg, Si, and P elements are essential in human bone tissue, HANW@MS core-shell porous hierarchical nanobrushes with multifunctional properties are expected to be promising for various biomedical applications such as bone defect repair and drug delivery.

Comparative study of porous hydroxyapatite/chitosan and whitlockite/chitosan scaffolds for bone regeneration in calvarial defects

Hydroxyapatite (HAP; Ca10(PO4)6(OH)2) and whitlockite (WH; Ca18Mg2(HPO4)2(PO4)12) are widely utilized in bone repair because they are the main components of hard tissues such as bones and teeth. In this paper, we synthesized HAP and WH hollow microspheres by using creatine phosphate disodium salt as an organic phosphorus source in aqueous solution through microwave-assisted hydrothermal method. Then, we prepared HAP/chitosan and WH/chitosan composite membranes to evaluate their biocompatibility in vitro and prepared porous HAP/chitosan and WH/chitosan scaffolds by freeze drying to compare their effects on bone regeneration in calvarial defects in a rat model. The experimental results indicated that the WH/chitosan composite membrane had a better biocompatibility, enhancing proliferation and osteogenic differentiation ability of human mesenchymal stem cells than HAP/chitosan. Moreover, the porous WH/chitosan scaffold can significantly promote bone regeneration in calvarial defects, and thus it is more promising for applications in tissue engineering such as calvarial repair compared to porous HAP/chitosan scaffold.