Coumarinylmethyl Caging Groups with Redshifted Absorption

A Green Light-Activated Insulin Depot with Ultrafast In Vivo Efficiency in the Subcutaneous Space

In this work, for the first time, we demonstrate light control of a therapeutic protein's release from a depot in the subcutaneous layer of the skin. The subcutaneous layer is a standard location for therapeutic protein depots due to its large size and ease of access, but prior attempts to utilize this space failed because insufficient light can reach this deeper layer. An analysis of existing biophysical literature suggested that an increase of photoactivation wavelength from 365 to 500 nm could allow an increase of depot irradiation in the subcutaneous by >100-fold. We therefore used a green light-activated thio-coumarin-based material and demonstrated robust release of a therapeutic, insulin, in response to skin illumination with an LED light source. We further demonstrated that this release is ultrafast, as fast or faster than any commercially used insulin, while maintaining the native insulin sequence. This release of insulin was then accompanied by a robust reduction in blood glucose, demonstrating the retention of bioactivity despite the synthetic processing required to generate the material. In addition, we observed that the material exhibits slow basal release of insulin, even in the absence of light, potentially through biochemical or photochemical unmasking of insulin. Thus, these materials can act much like the healthy pancreas does: releasing insulin at a slow basal rate and then, upon skin irradiation, releasing an ultrafast bolus of native insulin to reduce postprandial blood glucose excursions.

Coumarin as a general switching auxiliary to prepare photochromic and spontaneously blinking fluorophores

Single-molecule localization microscopy (SMLM) uses activatable or switchable fluorophores to create non-diffraction limited maps of molecular location in biological samples. Despite the utility of this imaging technique, the portfolio of appropriate labels for SMLM remains limited. Here, we describe a general strategy for the construction of "glitter bomb" labels by simply combining rhodamine and coumarin dyes though an amide bond. Condensation of the ortho-carboxyl group on the pendant phenyl ring of rhodamine dyes with a 7-aminocoumarin yields photochromic or spontaneously blinking fluorophores depending on the parent rhodamine structure. We apply this strategy to prepare labels useful super-resolution experiments in fixed cells using different attachment techniques. This general glitter bomb strategy should lead to improved labels for SMLM, ultimately enabling the creation of detailed molecular maps in biological samples.

Towards a Light-mediated Gene Therapy for the Eye using Caged Ethinylestradiol and the Inducible Cre/lox System

Increasingly, retinal pathologies are being treated with virus-mediated gene therapies. To be able to target viral transgene expression specifically to the pathological regions of the retina with light, we established an in vivo photoactivated gene expression paradigm for retinal tissue. Based on the inducible Cre/lox system, we discovered that ethinylestradiol is a suitable alternative to Tamoxifen as ethinylestradiol is more amenable to modification with photosensitive protecting compounds, i.e., "caging." Identification of ethinylestradiol as a ligand for the mutated human estradiol receptor was supported by in silico binding studies showing the reduced binding of caged ethinylestradiol. Caged ethinylestradiol was injected into the eyes of double transgenic GFAP-CreERT2 mice with a Cre-dependent tdTomato reporter transgene followed by irradiation with light of 450 nm. Photoactivation significantly increased retinal tdTomato expression compared to controls. We thus demonstrated a first step towards the development of a targeted, light-mediated gene therapy for the eyes.

Light-Responsive and Dual-Targeting Liposomes: From Mechanisms to Targeting Strategies

In recent years, nanocarriers have played an ever-increasing role in clinical and biomedical applications owing to their unique physicochemical properties and surface functionalities. Lately, much effort has been directed towards the development of smart, stimuli-responsive nanocarriers that are capable of releasing their cargos in response to specific stimuli. These intelligent-responsive nanocarriers can be further surface-functionalized so as to achieve active tumor targeting in a sequential manner, which can be simply modulated by the stimuli. By applying this methodological approach, these intelligent-responsive nanocarriers can be directed to different target-specific organs, tissues, or cells and exhibit on-demand controlled drug release that may enhance therapeutic effectiveness and reduce systemic toxicity. Light, an external stimulus, is one of the most promising triggers for use in nanomedicine to stimulate on-demand drug release from nanocarriers. Light-triggered drug release can be achieved through light irradiation at different wavelengths, either in the UV, visible, or even NIR region, depending on the photophysical properties of the photo-responsive molecule embedded in the nanocarrier system, the structural characteristics, and the material composition of the nanocarrier system. In this review, we highlighted the emerging functional role of light in nanocarriers, with an emphasis on light-responsive liposomes and dual-targeted stimuli-responsive liposomes. Moreover, we provided the most up-to-date photo-triggered targeting strategies and mechanisms of light-triggered drug release from liposomes and NIR-responsive nanocarriers. Lastly, we addressed the current challenges, advances, and future perspectives for the deployment of light-responsive liposomes in targeted drug delivery and therapy.

Comparative study of experimental and DFT calculations for 3-cinnamoyl 4-hydroxycoumarin derivatives

BACKGROUND

Computational research plays an important role in predicting the chemical and physical properties of biologically active compounds important in future structural modifications to improve or modify biological activity.

OBJECTIVE

This research focuses on quantum chemical and spectroscopic investigations properties of synthesized 4-hydroxycoumarin derivatives.

METHODS

Quantum chemical calculations were obtained using B3LYP, HF, and M06-2x level methods with the 6-31++G (d,p) basis set. Afterward, IR, 1H, 13C, UV-Visible experimentally parameters were compared with the results obtained using the B3LYP/6-31+G*(d) basis set of the molecules to be able to characterize the structures.

RESULTS

Based on the quantum chemical calculations compound with acetamido group on the phenyl ring is the most reactive, and compound with nitro substituent is the least reactive and the the strongest electrophile among tested compounds. With the exception of compounds with dimethylamino group, all other compounds have a pronounced tautomer between OH and C = O group. The calculated and experimental values are in agreement with each other.

CONCLUSION

The molecular structure in the ground state of six 3-cinnamoyl 4-hydroxycoumarin derivatives was optimized using density functional theory. The observed and computed values were compared and it can be concluded that the theoretical results were in good linear agreement with the experimental data.

Exploring Structural-Photophysical Property Relationships in Mitochondria-Targeted Deep-Red/NIR-Emitting Coumarins

Organic fluorophores operating in the optical window of biological tissues, namely in the deep-red and near-infrared (NIR) region of the electromagnetic spectrum, offer several advantages for fluorescence bioimaging applications owing to the appealing features of long-wavelength light, such as deep tissue penetration, lack of toxicity, low scattering, and reduced interference with cellular autofluorescence. Among these, COUPY dyes based on non-conventional coumarin scaffolds display suitable photophysical properties and efficient cellular uptake, with a tendency to accumulate primarily in mitochondria, which renders them suitable probes for bioimaging purposes. In this study, we have explored how the photophysical properties and subcellular localization of COUPY fluorophores can be modulated through the modification of the coumarin backbone. While the introduction of a strong electron-withdrawing group, such as the trifluoromethyl group, at position 4 resulted in an exceptional photostability and a remarkable redshift in the absorption and emission maxima when combined with a julolidine ring replacing the N,N-dialkylaminobenzene moiety, the incorporation of a cyano group at position 3 dramatically reduced the brightness of the resulting fluorophore. Interestingly, confocal microscopy studies in living HeLa cells revealed that the 1,1,7,7-tetramethyl julolidine-containing derivatives accumulated in the mitochondria with much higher specificity. Overall, our results provide valuable insights for the design and optimization of new COUPY dyes operating in the deep-red/NIR region.

Record release of tetramethylguanidine using a green light activated photocage for rapid synthesis of soft materials

Photocages have enabled spatiotemporally governed organic materials synthesis with applications ranging from tissue engineering to soft robotics. However, the reliance on high energy UV light to drive an often inefficient uncaging process limits their utility. These hurdles are particularly evident for more reactive cargo, such as strong organobases, despite their attractive potential to catalyze a range of chemical transformations. Herein, two metal-free boron dipyrromethene (BODIPY) photocages bearing tetramethylguanidine (TMG) cargo are shown to induce rapid and efficient polymerizations upon exposure to a low intensity green LED. A suite of spectroscopic characterization tools were employed to identify the underlying uncaging and polymerization mechanisms, while also determining reaction quantum efficiencies. The results are directly compared to state-of-the-art TMG-bearing ortho-nitrobenzyl and coumainylmethyl photocages, finding that the present BODIPY derivatives enable step-growth polymerizations that are >10× faster than the next best performing photocage. As a final demonstration, the inherent multifunctionality of the present BODIPY platform in releasing radicals from one half of the molecule and TMG from the other is leveraged to prepare polymers with starkly disparate physical properties. The present findings are anticipated to enable new applications of photocages in both small-molecule photochemistry for medicine and advanced manufacturing of next generation soft materials.

Controlled destabilization of caged circularized DNA oligonucleotides predicted by replica exchange molecular dynamics simulations

Spatiotemporal control is a critical issue in the design of strategies for the photoregulation of oligonucleotide activity. Efficient uncaging, i.e., activation by removal of photolabile protecting groups (PPGs), often necessitates multiple PPGs. An alternative approach is based on circularization strategies, exemplified by intrasequential circularization, also denoted photo-tethering, as introduced in [Seyfried et al., Angew. Chem., Int. Ed., 2017, 56, 359]. Here, we develop a computational protocol, relying on replica exchange molecular dynamics (REMD), in order to characterize the destabilization of a series of circularized, caged DNA oligonucleotides addressed in the aforementioned study. For these medium-sized (32 nt) oligonucleotides, melting temperatures are computed, whose trend is in good agreement with experiment, exhibiting a large destabilization and, hence, reduction of the melting temperature of the order of ΔTm ∼ 30 K as compared with the native species. The analysis of free energy landscapes confirms the destabilization pattern experienced by the circularized oligonucleotides. The present study underscores that computational protocols that capture controlled destabilization and uncaging of oligonucleotides are promising as predictive tools in the tailored photocontrol of nucleic acids.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

Mitochondria-Targeted COUPY Photocages: Synthesis and Visible-Light Photoactivation in Living Cells

Releasing bioactive molecules in specific subcellular locations from the corresponding caged precursors offers great potential in photopharmacology, especially when using biologically compatible visible light. By taking advantage of the intrinsic preference of COUPY coumarins for mitochondria and their long wavelength absorption in the visible region, we have synthesized and fully characterized a series of COUPY-caged model compounds to investigate how the structure of the coumarin caging group affects the rate and efficiency of the photolysis process. Uncaging studies using yellow (560 nm) and red light (620 nm) in phosphate-buffered saline medium have demonstrated that the incorporation of a methyl group in a position adjacent to the photocleavable bond is particularly important to fine-tune the photochemical properties of the caging group. Additionally, the use of a COUPY-caged version of the protonophore 2,4-dinitrophenol allowed us to confirm by confocal microscopy that photoactivation can occur within mitochondria of living HeLa cells upon irradiation with low doses of yellow light. The new photolabile protecting groups presented here complement the photochemical toolbox in therapeutic applications since they will facilitate the delivery of photocages of biologically active compounds into mitochondria.

Chromatic Selectivity of Coumarin-Caged Oligonucleotides

A system of two coumarin-based caging groups is presented - one absorbing in the blue (400-450 nm) and the other absorbing in the green (480-550 nm) part of the visible spectrum. Together they form a pair, which allows to selectively photoactivate the one or the other in oligonucleotides. A numerical characterization defining the term "chromatic selectivity" was proposed, and it was shown how chromatically selective uncaging can literally be titrated in a kinetic reaction scheme.

Light-Activated Translation of Different mRNAs in Cells via Wavelength-Dependent Photouncaging

The 5' cap is a hallmark of eukaryotic mRNA involved in the initiation of translation. Its modification with a single photo-cleavable group can bring translation of mRNA under the control of light. However, UV irradiation causes cell stress and downregulation of translation. Furthermore, complex processes often involve timed expression of more than one gene. The approach would thus greatly benefit from the ability to photo-cleave by blue light and to control more than one mRNA at a time. We report the synthesis of a 5' cap modified with a 7-(diethylamino)coumarin (CouCap) and adapted conditions for in vitro transcription. Translation of the resulting CouCap-mRNA is muted in vitro and in mammalian cells, and can be initiated by irradiation with 450 nm. The native cap is restored and no non-natural residues nor sequence alterations remain in the mRNA. Multiplexing for two different mRNAs was achieved by combining cap analogs with coumarin- and ortho-nitrobenzyl-based photo-cleavable groups.

2H-Pyrano[3,2-c]chromene-2,5(6H)-diones: Synthesis, Characterization, Photophysical and Redox Studies for Potential Optoelectronic Applications

Herein, we report the preparation of 2H-pyrano[3,2-c]chromene-2,5(6H)-diones 3a-x by reacting 4-hydroxycoumarins 1a-b with Baylis-Hillman adducts 2a-w having electron releasing or electron withdrawing groups on benzyl ring of the pyranochromene moiety and study of their photophysical properties. The study of optical and electrochemical properties of the prepared compounds reveals that the electron releasing and electron withdrawing groups has not much impact on ground and excited state electronic behavior on pyranochromene moiety. The density functional theory suggests the highest occupied molecular orbital and lowest unoccupied molecular orbitals spread on coumarin moiety of pyranochromene unit. Further, these compounds are thermally stable (up to 200 °C) and lead to blue or green emission that should facilitate the development of organic light emitting diodes (OLEDs).

The Development and Application of Opto-Chemical Tools in the Zebrafish

The zebrafish is one of the most widely adopted animal models in both basic and translational research. This popularity of the zebrafish results from several advantages such as a high degree of similarity to the human genome, the ease of genetic and chemical perturbations, external fertilization with high fecundity, transparent and fast-developing embryos, and relatively low cost-effective maintenance. In particular, body translucency is a unique feature of zebrafish that is not adequately obtained with other vertebrate organisms. The animal’s distinctive optical clarity and small size therefore make it a successful model for optical modulation and observation. Furthermore, the convenience of microinjection and high embryonic permeability readily allow for efficient delivery of large and small molecules into live animals. Finally, the numerous number of siblings obtained from a single pair of animals offers large replicates and improved statistical analysis of the results. In this review, we describe the development of opto-chemical tools based on various strategies that control biological activities with unprecedented spatiotemporal resolution. We also discuss the reported applications of these tools in zebrafish and highlight the current challenges and future possibilities of opto-chemical approaches, particularly at the single cell level.

Green‐Light Activatable BODIPY and Coumarin 5’‐Caps for Oligonucleotide Photocaging

We synthesized two green‐light activatable 5’‐caps for oligonucleotides based on the BODIPY and coumarin scaffold. Both bear an alkyne functionality allowing their use in numerous biological applications. They were successfully incorporated in oligonucleotides via solid‐phase synthesis. Copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) using a bisazide photo‐tether gave cyclic oligonucleotides that could be relinearized by activation with green light and were shown to exhibit high stability against exonucleases. Chemical ligation as another example for bioconjugation yielded oligonucleotides with an internal strand break site. Irradiation at 530 nm or 565 nm resulted in complete photolysis of both caging groups.

Inactivation of Competitive Decay Channels Leads to Enhanced Coumarin Photochemistry

In the development of photolabile protecting groups, it is of high interest to selectively modify photochemical properties with structural changes as simple as possible. In this work, knowledge of fluorophore optimization was adopted and used to design new coumarin‐ based photocages. Photolysis efficiency was selectively modulated by inactivating competitive decay channels, such as twisted intramolecular charge transfer (TICT) or hydrogen‐bonding, and the photolytic release of the neurotransmitter serotonin was demonstrated. Structural modifications inspired by the fluorophore ATTO 390 led to a significant increase in the uncaging cross section that can be further improved by the simple addition of a double bond. Ultrafast transient absorption spectroscopy gave insights into the underlying solvent‐dependent photophysical dynamics. The chromophores presented here are excellently suited as new photocages in the visible wavelength range due to their simple synthesis and their superior photochemical properties.

Design and synthesis of novel 2,2-dimethylchromene derivatives as potential antifungal agents

In order to find novel environment-friendly and effective antifungal agents, four series of 2,2-dimethyl-2H-chromene derivatives were designed, synthesized and characterized by spectroscopic analysis. The antifungal activities of all the target compounds against nine phytopathogenic fungi were evaluated in vitro. Preliminary results indicated that most of the target compounds exhibited obvious antifungal activity at the concentration of 50 μg/mL. Among them, compound 4j displayed more promising antifungal potency against Fusarium solani, Pyricularia oryzae, Alternaria brassicae, Valsa mali and Alternaria alternata strains than the two commercially available fungicides chlorothalonil and hymexazol, with the corresponding EC₅₀ values of 6.3, 7.7, 7.1, 7.5, 4.0 μg/mL, respectively. Moreover, the cell experiments results suggested that the target compounds had low cytotoxicity to the PC12 cell. This research will provide theoretical basis for the future application of 2,2-dimethyl-2H-chromenes as botanical fungicides in agriculture. Four series of novel, potent and low-toxicity 2,2-dimethyl-2H-chromene derivatives were designed and synthesized as agricultural antifungal agents. The in vitro antifungal experiments showed that compound 4j exhibited higher antifungal efficacy against five strains than the two commercially-available fungicides chlorothalonil and hymexazol.

A long-lived fluorenyl cation: efficiency booster for uncaging and photobase properties

The photochemistry of fluorenols has been of special interest for many years. This is because both the fluorenol and the fluorenyl cation are antiaromatic in the ground state due to their 4n π-electrons according to the Hückel rule. The photolysis reaction of various fluorene derivatives takes place via a cation intermediate and is preferred due to its excited state aromaticity. Here we present an extremely long-lived fluorenyl cation and its effects on the uncaging of various leaving groups. We analyze the relationship between uncaging quantum yields of fluorene-based cages and the longevity of their fluorenyl cations with different spectroscopic methods in the steady state and on an ultrafast time scale and find that the uncaging quantum yield rises with the stability of the cation. In contrast to previous reports, the cation can be observed on a time scale of minutes, even in moderately protic solvents as methanol and ethanol. The stability of this cation depends on the dimethylamino-substituents on the fluorene scaffold and the properties of the solvent. In addition, with bis-dimethylamino fluorenol, a photobase is introduced that expands the small group of known photoinduced hydroxide emitters.

Coronene-embedded 'super' coumarins

A non-planar π-enlarged coronene-embedded coumarin achieved via pyranone annulation and its cyanated derivative possess bright orange to red emission in both solution and solid states, with scope for bioimaging applications. The multiple redox states, frontier molecular orbital energy levels and strong cofacial π-stacking ability point towards applications in organic optoelectronics.

Optochemical Control of Bacterial Gene Expression: Novel Photocaged Compounds for Different Promoter Systems

Photocaged compounds are applied for implementing precise, optochemical control of gene expression in bacteria. To broaden the scope of UV‐light‐responsive inducer molecules, six photocaged carbohydrates were synthesized and photochemically characterized, with the absorption exhibiting a red‐shift. Their differing linkage through ether, carbonate, and carbamate bonds revealed that carbonate and carbamate bonds are convenient. Subsequently, those compounds were successfully applied in vivo for controlling gene expression in E. coli via blue light illumination. Furthermore, benzoate‐based expression systems were subjected to light control by establishing a novel photocaged salicylic acid derivative. Besides its synthesis and in vitro characterization, we demonstrate the challenging choice of a suitable promoter system for light‐controlled gene expression in E. coli. We illustrate various bottlenecks during both photocaged inducer synthesis and in vivo application and possibilities to overcome them. These findings pave the way towards novel caged inducer‐dependent systems for wavelength‐selective gene expression.

Triggering biological processes: methods and applications of photocaged peptides and proteins

There has been a significant push in recent years to deploy fundamental knowledge and methods of photochemistry toward biological ends. Photoreactive groups have enabled chemists to activate biological function using the concept of photocaging. By granting spatiotemporal control over protein activation, these photocaging methods are fundamental in understanding biological processes. Peptides and proteins are an important group of photocaging targets that present conceptual and technical challenges, requiring precise chemoselectivity in complex polyfunctional environments. This review focuses on recent advances in photocaging techniques and methodologies, as well as their use in living systems. Photocaging methods include genetic and chemical approaches that require a deep understanding of structure-function relationships based on subtle changes in primary structure. Successful implementation of these ideas can shed light on important spatiotemporal aspects of living systems.

Wavelength-Selective Uncaging of Two Different Photoresponsive Groups on One Effector Molecule for Light-Controlled Activation and Deactivation

Photocleavable protecting groups (PPGs) play a pivotal role in numerous studies. They enable controlled release of small effector molecules to induce biochemical function. The number of PPGs attached to a variety of effector molecules has grown rapidly in recent years satisfying the high demand for new applications. However, until now molecules carrying PPGs have been designed to activate function only in a single direction, namely the release of the effector molecule. Herein, we present the new approach Two-PPGs-One-Molecule (TPOM) that exploits the orthogonal photolysis of two photoprotecting groups to first release the effector molecule and then to modify it to suppress its induced effect. The moiety resembling the tyrosyl side chain of the translation inhibitor puromycin was synthetically modified to the photosensitive ortho-nitrophenylalanine that cyclizes upon near UV-irradiation to an inactive puromycin cinnoline derivative. Additionally, the modified puromycin analog was protected by the thio-coumarylmethyl group as the second PPG. This TPOM strategy allows an initial wavelength-selective activation followed by a second light-induced deactivation. Both photolysis processes were spectroscopically studied in the UV/vis- and IR-region. In combination with quantum-chemical calculations and time-resolved NMR spectroscopy, the photoproducts of both activation and deactivation steps upon illumination were characterized. We further probed the translation inhibition effect of the new synthesized puromycin analog upon light activation/deactivation in a cell-free GFP translation assay. TPOM as a new method for precise triggering activation/deactivation of effector molecules represents a valuable addition for the control of biological processes with light.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Transformation of COUPY Fluorophores into a Novel Class of Visible-Light-Cleavable Photolabile Protecting Groups

Although photolabile protecting groups (PPGs) have found widespread applications in several fields of chemistry, biology and materials science, there is a growing interest in expanding the photochemical toolbox to overcome some of the limitations of classical caging groups. In this work, the synthesis of a new class of visible-light-sensitive PPGs based on low-molecular weight COUPY fluorophores with several attractive properties, including long-wavelength absorption, is reported. Besides being stable to spontaneous hydrolysis in the dark, COUPY-based PPGs can be efficiently photoactivated with yellow (560 nm) and red light (620 nm) under physiological-like conditions, thereby offering the possibility of unmasking functional groups from COUPY photocages under irradiation conditions in which other PPGs remain stable. Additionally, COUPY photocages exhibit excellent cellular uptake and accumulate selectively in mitochondria, opening the door to the delivery of caged analogues of biologically active compounds into these organelles.

Light: A Magical Tool for Controlled Drug Delivery

Light is a particularly appealing tool for on-demand drug delivery due to its noninvasive nature, ease of application and exquisite temporal and spatial control. Great progress has been achieved in the development of novel light-driven drug delivery strategies with both breadth and depth. Light-controlled drug delivery platforms can be generally categorized into three groups: photochemical, photothermal, and photoisomerization-mediated therapies. Various advanced materials, such as metal nanoparticles, metal sulfides and oxides, metal-organic frameworks, carbon nanomaterials, upconversion nanoparticles, semiconductor nanoparticles, stimuli-responsive micelles, polymer- and liposome-based nanoparticles have been applied for light-stimulated drug delivery. In view of the increasing interest in on-demand targeted drug delivery, we review the development of light-responsive systems with a focus on recent advances, key limitations, and future directions.

Photosensitive hydrogels: from structure, mechanisms, design to bioapplications

Hydrogel is a smart material with a three-dimensional network structure and has been widely used in various fields due to its good biodegradability, biocompatibility, and modification. Photosensitive hydrogel is a smart hydrogel, and its amenability to remote, precise control, and flexible and convenient regulation of stimulating factors make it an ideal candidate for use in fields such as biological materials, drug carriers, and sensors. In this review, we discuss the structure, mechanisms, design principles, and bioapplications of photosensitive hydrogels as developed in recent years. Finally, their potential for development and potential future challenges are outlined.

Thiocoumarin Caged Nucleotides: Synthetic Access and Their Photophysical Properties

Photocages have been successfully applied in cellular signaling studies for the controlled release of metabolites with high spatio-temporal resolution. Commonly, coumarin photocages are activated by UV light and the quantum yields of uncaging are relatively low, which can limit their applications in vivo. Here, syntheses, the determination of the photophysical properties, and quantum chemical calculations of 7-diethylamino-4-hydroxymethyl-thiocoumarin (thio-DEACM) and caged adenine nucleotides are reported and compared to the widely used 7-diethylamino-4-hydroxymethyl-coumarin (DEACM) caging group. In this comparison, thio-DEACM stands out as a phosphate cage with improved photophysical properties, such as red-shifted absorption and significantly faster photolysis kinetics.

Monitoring of uncaging processes by designing photolytical reactions

The use of photolabile protecting groups (PPGs) has been growing in emphasis for decades, and nowadays they enable cutting-edge results in numerous fields ranging from organic synthesis to neurosciences. PPGs are chemical entities that can be conjugated to a biomolecule to hide its biological activity, forming a stable so called "caged compound". This conjugate can be simply cleaved by light and therefore, the functionality of the biomolecule is restored with the formation of a PPG by-product. However, there is a sizeable need for PPGs that are able to quantify the "uncaging" process. In this review, we will discuss several strategies leading to an acute quantification of the uncaging events by fluorescence. In particular, we will focus on how molecular engineering of PPG could open new opportunities by providing easy access to photoactivation protocols.

Multicomponent Synthesis of Iminocoumarins via Rhodium-Catalyzed C-H Bond Activation

We herein establish a multicomponent annulation method for the synthesis of valuable iminocoumarins using aryl thiocarbamates, internal alkynes, and sulfonamides as starting materials, which are safe and readily available. The key step is a Rh-catalyzed and sulfur-directed C-H bond activation. Preliminary mechanistic investigations suggested that the nucleophilic attack of the sulfonamide on an active iminium cation finally completes the imine segment.

Conditionally Activatable Visible-Light Photocages

The proof of concept for conditionally activatable photocages is demonstrated on a new vinyltetrazine-derivatized coumarin. The tetrazine form is disabled in terms of light-induced cargo release, however, bioorthogonal transformation of the modulating tetrazine moiety results in fully restored photoresponsivity. Irradiation of such a “click-armed” photocage with blue light leads to fast and efficient release of a set of caged model species, conjugated via various linkages. Live-cell applicability of the concept was also demonstrated by the conditional release of a fluorogenic probe using mitochondrial pretargeting.

Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application

Photoresponsive hydrogels (PRHs) are soft materials whose mechanical and chemical properties can be tuned spatially and temporally with relative ease. Both photo-crosslinkable and photodegradable hydrogels find utility in a range of biomedical applications that require tissue-like properties or programmable responses. Progress in engineering with PRHs is facilitated by the development of theoretical tools that enable optimization of their photochemistry, polymer matrices, nanofillers, and architecture. This review brings together models and design principles that enable key applications of PRHs in tissue engineering, drug delivery, and soft robotics, and highlights ongoing challenges in both modeling and application.

An Overview of Coumarin as a Versatile and Readily Accessible Scaffold with Broad-Ranging Biological Activities

Privileged structures have been widely used as an effective template for the research and discovery of high value chemicals. Coumarin is a simple scaffold widespread in Nature and it can be found in a considerable number of plants as well as in some fungi and bacteria. In the last years, these natural compounds have been gaining an increasing attention from the scientific community for their wide range of biological activities, mainly due to their ability to interact with diverse enzymes and receptors in living organisms. In addition, coumarin nucleus has proved to be easily synthetized and decorated, giving the possibility of designing new coumarin-based compounds and investigating their potential in the treatment of various diseases. The versatility of coumarin scaffold finds applications not only in medicinal chemistry but also in the agrochemical field as well as in the cosmetic and fragrances industry. This review is intended to be a critical overview on coumarins, comprehensive of natural sources, metabolites, biological evaluations and synthetic approaches.

A Fluorescent False Neurotransmitter as a Dual Electrofluorescent Probe for Secretory Cell Models

A dual electrofluorescent probe (FFN42) belonging to the fluorescent false neurotransmitter family was rationally designed for investigating cell secretion. This probe, which comprises a coumarin core with one amino and two hydroxy groups, is very promising due to its electroactive and fluorescent properties. The optimal excitation and emission wavelengths (380 nm and 470 nm respectively) make this probe adapted for use in fluorescence microscopy. FFN42 has a quantum yield of 0.18, a molar absorption coefficient of 12000 M^-1 cm^-1 and pKa values of 5.4 and 6.7 for the hydroxy groups. The electroactivity of FFN42 was evidenced on carbon fiber and ITO electrodes at relatively low oxidation potentials (0.24 V and 0.45 V vs Ag/AgCl respectively). Epifluorescence observations showed that FFN42 accumulated into secretory vesicles of PC12 and N13 cells. Toxicity tests further revealed that FFN42 had no lethal effect on these cells. Amperometric data obtained on carbon fiber electrodes proved that the probe is released by N13 cells.

Red-shifted backbone N–H photocaging agents

A 3-nitrodibenzofuran cure provides blue-shifted reactivity in vinylogous photocleavage processes.

Photochemical mechanism of DEACM uncaging: a combined time-resolved spectroscopic and computational study

Combined spectroscopic and computational studies elucidate excited-state photocleavage in DEACM cages, explaining vastly different time scales for different leaving groups.

Exploring the Relationship between BODIPY Structure and Spectroscopic Properties to Design Fluorophores for Bioimaging

Designing chromophores for biological applications requires a fundamental understanding of how the chemical structure of a chromophore influences its photophysical properties. We here describe the synthesis of a library of BODIPY dyes, exploring diversity at various positions around the BODIPY core. The results show that the nature and position of substituents have a dramatic effect on the spectroscopic properties. Substituting in a heavy atom or adjusting the size and orientation of a conjugated system provides a means of altering the spectroscopic profiles with high precision. The insight from the structure-activity relationship was applied to devise a new BODIPY dye with rationally designed photochemical properties including absorption towards the near-infrared region. The dye also exhibited switch-on fluorescence to enable visualisation of cells with high signal-to-noise ratio without washing-out of unbound dye. The BODIPY-based probe is non-cytotoxic and compatible with staining procedures including cell fixation and immunofluorescence microscopy.

Green-Light Activatable, Water-Soluble Red-Shifted Coumarin Photocages

Easily accessible green-light activatable (>500 nm) photocages based on red-shifted, π-extended coumarin scaffolds are developed with uncaging efficiencies similar to those of recently introduced BODIPY derivatives. The photocages possess increased aqueous solubility, high absorption coefficients within the 450-600 nm range, and exceptionally high two-photon cross sections.