Hybrid Nanocarbon as a Catalyst for Direct Dehydrogenation of Propane: Formation of an Active and Selective Core–Shell sp 2 /sp 3 Nanocomposite Structure

A metal-free carbon catalyst for oxidative dehydrogenation of aryl cyclohexenes to produce biaryl compounds

A metal-free route based on a carbon catalyst to synthesize biphenyls through oxidative dehydrogenation (ODH) of phenyl cyclohexene has been investigated. Among the samples examined, an air-oxidized active carbon exhibits the best activity with a 9.1 × 10-2 h-1 rate constant, yielding 74% biphenyl in 28 h at 140 °C under five bar O2 in anisole. The apparent activation energy is measured as 54.5 kJ⋅mol-1. The extended reaction scope, consisting of 15 differently substituted phenyl cyclohexenes, shows the wide applicability of the proposed method. The catalyst's good recyclability over six runs suggests this ODH method as a promising route to access the biaryl compounds. In addition, the reaction mechanism is investigated with a combination of X-ray photoelectron spectroscopy, functional group blocking, and model compounds of carbon catalysts and is proposed to be based on the redox cycle of the quinoidic groups on the carbon surface. Additional experiments prove that the addition of the catalytic amount of acid (methanesulfonic acid) accelerates the reaction. In addition, Hammett plot examination suggests the formation of a carbonium intermediate, and its possible structure is outlined.

Revealing the promotion of carbonyl groups on vacancy stabilized Pt4/nanocarbons for propane dehydrogenation

Nanocarbons are promising supports for Pt clusters applied in propane dehydrogenation (PDH), owing to their large surface areas and tunable chemical properties. The vacancies and oxygen-containing groups (OCGs) in nanocarbons can enhance catalytic performance by tailoring the coordination environment of Pt clusters. Herein, 46 nanocarbons with coexisting vacancies and OCGs were designed to support Pt clusters, of which the influences on PDH were revealed by density functional theory calculations. Nanocarbons with divacancies (V2) and CO edge groups were screened out as the most appropriate support for Pt clusters in PDH. Due to the V2, tetrahedral Pt clusters were distorted into three-layered configurations, contributing to enhanced binding strength and a favorable reactive pathway starting from the methylene group in propane. This changed the rate-determining step to the first C-H bond scission with a low energy barrier. The introduction of CO edge groups coexisting with V2 further improved the stabilization of Pt clusters, resulting from the increased electron transfer from Pt atoms to C atoms. The abilities to break C-H bonds and inhibit C-C bond cracking were also enhanced as compared to the nanocarbons with only V2. Therefore, this work provides references on the regulation of vacancies and OCGs in carbon-based catalysts.

Advanced design and development of catalysts in propane dehydrogenation

Propane dehydrogenation (PDH) is an industrial technology for direct propylene production, which has received extensive attention and realized large-scale application. At present, the commercial Pt/Cr-based catalysts suffer from fast deactivation and inferior stability resulting from active species sintering and coke depositing. To overcome the above problems, several strategies such as the modification of the support and the introduction of additives have been proposed to strengthen the catalytic performance and prolong the robust stability of Pt/Cr-based catalysts. This review firstly gives a brief description of the development of PDH and PDH catalysts. Then, the advanced research progress of supported noble metals and non-noble metals together with metal-free materials for PDH is systematically summarized along with the material design and active origin as well as the existing problems in the development of PDH catalysts. Furthermore, the review also emphasizes advanced synthetic strategies based on novel design of PDH catalysts with improved dehydrogenation activity and stability. Finally, the future challenges and directions of PDH catalysts are provided for the development of their further industrial application.

Photo-fluorination of nanodiamonds catalyzing oxidative dehydrogenation reaction of ethylbenzene

Styrene is one of the most important industrial monomers and is traditionally synthesized via the dehydrogenation of ethylbenzene. Here, we report a photo-induced fluorination technique to generate an oxidative dehydrogenation catalyst through the controlled grafting of fluorine atoms on nanodiamonds. The obtained catalyst has a fabulous performance with ethylbenzene conversion reaching 70% as well as styrene yields of 63% and selectivity over 90% on a stream of 400 °C, which outperforms other equivalent benchmarks as well as the industrial K-Fe catalysts (with a styrene yield of 50% even at a much higher temperature of ca. 600 °C). Moreover, the yield of styrene remains above 50% after a 500 h test. Experimental characterizations and density functional theory calculations reveal that the fluorine functionalization not only promotes the conversion of sp3 to sp2 carbon to generate graphitic layers but also stimulates and increases the active sites (ketonic C=O). This photo-induced surface fluorination strategy facilitates innovative breakthroughs on the carbocatalysis for the oxidative dehydrogenation of other arenes.

Revealing the Structure Evolution of Heterogeneous Pd Catalyst in Suzuki Reaction via the Identical Location Transmission Electron Microscopy

The mechanism of palladium nanoparticles (Pd NPs)-catalyzed cross-coupling reactions has been the subject of intense debate since the recognition of catalytic active sites involving a wide array of dynamic changed Pd species. Here, through the combination of the hot filtration experiment together with the recently developed identical location transmission electron microscopy (IL-TEM) method, the delicate structure evolution of highly dispersed Pd NPs supported on oxygen-functionalized carbon nanotubes (Pd/oCNTs) as well as the kinetics properties of derived dissolved species in liquid phase were systemically investigated in the Suzuki-Miyaura reaction. The result indicates that the leached Pd components caused by the strong adsorption of reactants might have a significant contribution to the coupling products, and the degree for different substrates follows the order of iodobenzene > phenylboronic acid > bromobenzene. Meanwhile, the typical three sequential behaviors of supported Pd NPs, including dissolution, deposition, and growth, along with the increase of the conversion throughout the reaction were spatiotemporally observed by tracking the evolution of individually identifiable NPs. The performed work not only provides direct evidence for the interaction between Pd NPs surface with reactants on atomic scale but also gives a valuable reference for fundamentally understanding the mechanism of the heterogeneous Pd-catalyzed Suzuki coupling process as well as rational design of next-generation catalysts with high efficiency and reusability for synthetic applications.

Conversion of Secondary C3-C4 Aliphatic Alcohols on Carbon Nanotubes Consolidated by Spark Plasma Sintering

We analyze how the changes in the dimension of carbon nanomaterial (CNM) affect their catalytic conversion of secondary aliphatic alcohols. Carbon nanotubes (CNTs) consolidated by spark plasma sintering (SPS) were inactive in the conversion of secondary C₃-C₄ aliphatic alcohols because of the «healing» of defects in carbon structure during SPS. Gas-phase treatment of consolidated CNTs with HNO₃ vapors led to their surface oxidation without destruction of the bulk structure of pellets. The oxygen content in consolidated CNTs determined by X-ray photoelectron spectroscopy increased from 11.3 to 14.9 at. % with increasing the oxidation time from 3 to 6 h. Despite the decrease in the specific surface area, the oxidized samples showed enhanced catalytic activity in alcohol conversion because of the increased number of oxygen radicals with unpaired electrons, which was established by electron paramagnetic resonance spectroscopy. We conclude that the structure of CNM determines the content and/or ratio of sp² and sp³-hybridized carbon atoms in the material. The experimental and literature data demonstrated that sp³-hybridized carbon atoms on the surface are probably the preferable site for catalytic conversion of alcohols.

Quantitative Analysis Method for Nitrogen Electron Energy-Loss Near-Edge Structures in Nanocarbons Based on Density Functional Theory Calculations and Linear Regression

Nonmetallic heteroatoms found in carbon nanomaterials act as active sites and exhibit excellent catalytic performance. Owing to structural complexity and the limitations of characterization technology, the identification of active sites in nanocarbon is challenging and controversial. Electron energy-loss spectroscopy is an electron microscope technique with high spatial resolution and a powerful tool for identifying the arrangement of heteroatoms. However, structural information regarding the configuration and distribution of heteroatoms is difficult to obtain using existing analytical methods. Herein, we have developed a method for the quantitative analysis of electron energy-loss near-edge structures to identify accurately nitrogen species in nanocarbon. Based on this approach, the relative amounts of nitrogen species were obtained from linear regression with calculated spectra. The concentration distribution of nanocarbon obtained by this method was consistent with the result of X-ray photoelectron spectroscopy analysis at different depths. Therefore, this fitting method can be used for the quantitative analysis of nitrogen K-edge structures. This provides a new strategy for studying the structure-activity relationships of carbon-based materials and the further design of custom nanocarbon catalysts with high active site densities.

A mutually isolated nanodiamond/porous carbon nitride nanosheet hybrid with enriched active sites for promoted catalysis in styrene production

A mutually isolated nanodiamond/porous carbon nitride nanosheet hybrid with enriched catalytic sites is fabricated by a facile two-step molten salt-oxidation strategy, generating an excellent catalyst for clean and energy-saving styrene production.

Playing with covalent triazine framework tiles for improved CO2 adsorption properties and catalytic performance

The rational design and synthesis of covalent triazine frameworks (CTFs) from defined dicyano-aryl building blocks or their binary mixtures is of fundamental importance for a judicious tuning of the chemico-physical and morphological properties of this class of porous organic polymers. In fact, their gas adsorption capacity and their performance in a variety of catalytic transformations can be modulated through an appropriate selection of the building blocks. In this contribution, a set of five CTFs (CTF1-5) have been prepared under classical ionothermal conditions from single dicyano-aryl or heteroaryl systems. The as-prepared samples are highly micro-mesoporous and thermally stable materials featuring high specific surface area (up to 1860 m2·g-1) and N content (up to 29.1 wt %). All these features make them highly attractive samples for carbon capture and sequestration (CCS) applications. Indeed, selected polymers from this series rank among the CTFs with the highest CO2 uptake at ambient pressure reported so far in the literature (up to 5.23 and 3.83 mmol·g-1 at 273 and 298 K, respectively). Moreover, following our recent achievements in the field of steam- and oxygen-free dehydrogenation catalysis using CTFs as metal-free catalysts, the new samples with highest N contents have been scrutinized in the process to provide additional insights to their complex structure-activity relationship.

Combined study of the ground and excited states in the transformation of nanodiamonds into carbon onions by electron energy-loss spectroscopy

The electron momentum density and sp²/sp³ ratio of carbon materials in the thermal transformation of detonation nanodiamonds (ND) into carbon nano-onions are systematically studied by electron energy-loss spectroscopy (EELS). Electron energy-loss near-edge structures of the carbon K-ionization in the electron energy-loss spectroscopy are measured to determine the sp² content of the ND-derived samples. We use the method developed by Titantah and Lamoen, which is based on the ability to isolate the π^* spectrum and has been shown to give reliable and accurate results. Compton profiles (CPs) of the ND-derived carbon materials are obtained by performing EELS on the electron Compton scattering region. The amplitude of the CPs at zero momentum increases with increasing annealing temperature above 500 °C. The dramatic changes occur in the temperature range of 900–1300 °C, which indicates that the graphitization process mainly occurs in this annealing temperature region. Our results complement the previous work on the thermal transformation of ND-derived carbon onions and provide deeper insight into the evolution of the electronic properties in the graphitization process.

A Review of Carbon-Composited Materials as Air-Electrode Bifunctional Electrocatalysts for Metal–Air Batteries

Metal–air batteries (MABs), particularly rechargeable MABs, have gained renewed interests as a potential energy storage/conversion solution due to their high specific energy, low cost, and safety. The development of MABs has, however, been considerably hampered by its relatively low rate capability and its lack of efficient and stable air catalysts in which the former stems mainly from the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) and the latter stems from the corrosion/oxidation of carbon materials in the presence of oxygen and high electrode potentials. In this review, various carbon-composited bifunctional electrocatalysts are reviewed to summarize progresses in the enhancement of ORR/OER and durability induced by the synergistic effects between carbon and other component(s). Catalyst mechanisms of the reaction processes and associated performance enhancements as well as technical challenges hindering commercialization are also analyzed. To facilitate further research and development, several research directions for overcoming these challenges are also proposed.

An Efficient Metal-Free Catalyst for Oxidative Dehydrogenation Reaction: Activated Carbon Decorated with Few-Layer Graphene

Activated carbon (AC) has been widely used in the catalysis field because of its low cost, scalable production, high specific surface area, and abundant exposed edge. Because of the amorphous structure, traditional AC is unstable in presence of O₂ at high temperature, which hinders the application of AC catalysts in oxidative dehydrogenation (ODH) of alkanes. Here, partially graphitic AC decorated with few-layer graphene is facilely fabricated by simple high-temperature calcination. The graphitic transformation significantly enhances the antioxidation property, long-term stability of AC during the ODH reaction, and especially dramatically increases the graphitic edge areas in which the active ketonic carbonyl groups are selectively formed in ODH reactions. A high reactivity with 41.5 % selectivity and 13.2 % yield to C₄ alkenes were obtained at 450 °C over the optimized catalyst, which is superior to all the previously reported carbon catalysts and shows a great potential for industrial application.

Catalysis by hybrid sp2/sp3nanodiamonds and their role in the design of advanced nanocarbon materials

Hybrid sp²/sp³nanocarbons, in particular sp³-hybridized ultra-dispersed nanodiamonds and derivative materials, such as the sp³/sp²-hybridized bucky nanodiamonds and sp²-hybridized onion-like carbons, represent a rather interesting class of catalysts still under consideration.

Oxidative dehydrogenation reaction of short alkanes on nanostructured carbon catalysts: a computational account

We aim to provide an overview of the current status and recent achievements of computational studies of the ODH reaction on nanostructured carbon catalysts.

Efficient and Highly Selective Solvent-Free Oxidation of Primary Alcohols to Aldehydes Using Bucky Nanodiamond

Selective oxidation of alcohols to aldehydes is widely applicable to the synthesis of various green chemicals. The poor chemoselectivity for complicated primary aldehydes over state-of-the-art metal-free or metal-based catalysts represents a major obstacle for industrial application. Bucky nanodiamond is a potential green catalyst that exhibits excellent chemoselectivity and cycling stability for the selective oxidation of primary alcohols in diverse structures (22 examples, including aromatic, substituted aromatic, unsaturated, heterocyclic, and linear chain alcohols) to their corresponding aldehydes. The results are comparable to reported transition-metal catalysts including conventional Pt/C and Ru/C catalysts for certain substrates under solvent-free conditions. The possible activation process of the oxidant and substrates by the surface oxygen groups and defect species are revealed with model catalysts, ex situ electrochemical measurements, and ex situ attenuated total reflectance. The zigzag edges of sp² carbon planes are shown to play a key role in these reactions.

Insights into the surface chemistry and electronic properties of sp2 and sp3-hybridized nanocarbon materials for catalysis

Ultra-dispersed nanodiamond and its derivatives (UNDDs), including bucky nanodiamond and onion-like carbon, offer superior catalytic behavior relative to other nanocarbons. However, a systematic study of their unique properties has been rarely achieved. Their surface chemistry and electronic properties are therefore studied to reveal the essential differences of UNDDs compared to other nanocarbons for catalysis.

Adsorption and dehydrogenation of ethane, propane and butane on Rh13 clusters supported on unzipped graphene oxide and TiO2(110) – a DFT study

The catalytic activity for the adsorption and dehydrogenation of alkanes on a low-symmetry Rh₁₃ cluster (Rh₁₃-L_s) is compared with the same cluster supported on either an unzipped graphene-oxide sheet or a TiO₂(110) surface.

Inherently-Forced Tensile Strain in Nanodiamond-Derived Onion-like Carbon: Consequences in Defect-Induced Electrochemical Activation

We analyzed the nanodiamond-derived onion-like carbon (OLC) as function of synthesis temperature (1000~1400 °C), by high-resolution electron microscopy, electron energy loss spectroscopy, visible-Raman spectroscopy, ultraviolet photoemission spectroscopy, impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The temperature dependences of the obtained properties (averaged particle size, tensile strain, defect density, density of states, electron transfer kinetics, and electrochemical oxidation current) unanimously coincided: they initially increased and saturated at 1200 °C. It was attributed to the inherent tensile strains arising from (1) the volume expansion associated with the layer-wise diamond-to-graphite transformation of the core, which caused forced dilation of the outer shells during their thermal synthesis; (2) the extreme curvature of the shells. The former origin was dominant over the latter at the outermost shell, of which the relevant evolution in defect density, DOS and electron transfer kinetics determined the electrochemical performances. In detection of dopamine (DA), uric acid (UA) and ascorbic acid (AA) using the OLC as electrode, their oxidation peak currents were enhanced by factors of 15~60 with annealing temperature. Their limit of detection and the linear range of detection, in the post-treatment-free condition, were as excellent as those of the nano-carbon electrodes post-treated by Pt-decoration, N-doping, plasma, or polymer.