Rational Design of Heat-Set and Specific-Ion-Responsive Supramolecular Hydrogels Based on the Hofmeister Effect

Ag+-Induced Supramolecular Polymers of Folic Acid: Reinforced by External Kosmotropic Anions Exhibiting Salting Out

Introducing kosmotropic salts enhances protein stability and reduces solubility by withdrawing water from the protein surface, leading to 'salting out', a phenomenon we have mimicked in supramolecular polymers (SPs). Under the guidance of Ag+, folic acid (FA) self-assembled in water through slipped-stacking and hydrophobic interactions into elongated, robust one-dimensional SPs, resulting in thermo-stable supergels. The SPs exhibited temperature and dilution tolerance, attributed to the stability of the FA-Ag+ complex and its hydrophobic stacking. Importantly, FA-Ag+ SP's stability has been augmented by the kosmotropic anions, such as SO42-, strengthening hydrophobic interactions in the SP, evident from the enhanced J-band, causing improvement of gel's mechanical property. Interestingly, higher kosmotrope concentrations caused a significant decrease in SP's solubility, leading to precipitation of the reinforced SPs─a 'salting out' effect. Conversely, chaotropes like ClO4- slightly destabilized hydrophobic stacking and promoted an extended conformation of individual SP chain with enhanced solubility, resembling a 'salting in' effect.

A Unique Temperature-Induced Reverse Supramolecular Chirality-Assisted Gel-to-Gel Transition

Supramolecular hydrogels typically undergo a gel-to-sol transition with heat, as intermolecular interactions within the gel weaken. Although gel-to-gel transitions during heating are rare, they may occur due to minor rearrangements caused by thermal forces in the supramolecular self-assembled structure. Here, an unprecedented temperature-induced gel-to-gel transition assisted by supramolecular chiral inversion in a hydrogel system is presented. The transition results from a left-handed M-type helix to a right-handed P-type helix, attributed to the π-system-conjugated amino acid, l-Tyrosine (Fm- l-Tyr). Upon solvent dilution, Fm-l-Tyr induces translucent hydrogel formed by entangled fibers with a kinetically stable left-handed M-type supramolecular helix. At 70 °C, hydrogel transforms into an opaque gel with a reverse supramolecular chirality yielding a thermodynamically stable right-handed P-type helix. Supramolecular chiral inversion is substantiated by two chiroptical methods. This unique gel-to-gel transition, accompanied by chiral inversion, is anticipated to attract attention, especially for applications sensitive to chirality.

Heat-Set Supramolecular Hydrogelation by Regulating the Hydrophilic-Lipophilic Balance for a Tunable Circularly Polarized Luminescent Switch

Heat-set supramolecular gels exhibited totally opposite phase behaviors of dissolution upon cooling and gelation on heating. They are commonly discovered by chance and their rational design remains a great challenge. Herein, a rational design strategy is proposed to realize heat-set supramolecular hydrogelation through regulation of the hydrophilic-lipophilic balance of the system. A newly synthesized amphiphile hydrogelator with pyrene embedded in its lipophilic terminal can self-assemble into a hydrogel through a heating and cooling cycle. However, the host-guest complex of the gelator and hydrophilic γ-cyclodextrin (γ-CyD) results in a sol at room temperature. Thus, heat-set hydrogelation is realized from the sol state in a controllable manner. Heat-set gelation mechanism is revealed by exploring critical heat-set supramolecular gelation and the related findings provide a general strategy for developing new functional molecular gels with tunable hydrophilic-lipophilic balance.

A guanidium salt as a chaotropic agent for aqueous battery electrolytes

This study investigates a salt design principle for aqueous battery electrolytes by combining chaotropic ions, guanidium cations (Gdm) and bis(trifluoromethanesulfonyl)imide anions (TFSI), forming GdmTFSI. This salt's crystal structure was solved via single-crystal X-ray diffraction and characterized using Fourier-transform infrared spectroscopy. Study reveals that GdmTFSI salt disrupts the hydrogen bonding network of aqueous solutions, impacting water reactivity at electrochemical interfaces.

Hofmeister Effects Shine in Nanoscience

Hofmeister effects play a crucial role in nanoscience by affecting the physicochemical and biochemical processes. Thus far, numerous wonderful applications from various aspects of nanoscience have been developed based on the mechanism of Hofmeister effects, such as hydrogel/aerogel engineering, battery design, nanosynthesis, nanomotors, ion sensors, supramolecular chemistry, colloid and interface science, nanomedicine, and transport behaviors, etc. In this review, for the first time, the progress of applying Hofmeister effects is systematically introduced and summarized in nanoscience. It is aimed to provide a comprehensive guideline for future researchers to design more useful Hofmeister effects-based nanosystems.

Three-dimensional (3D) bioprinting of medium toughened dipeptide hydrogel scaffolds with Hofmeister effect

Short peptide self-assembled hydrogels as 3D bioprinting inks show excellent biocompatibility and diverse functional expansion, and have broad application prospects in cell culture and tissue engineering. However, the preparation of biological hydrogel inks with adjustable mechanical strength and controllable degradation for 3D bioprinting still faces big challenges. Herein, we develop dipeptide bio-inks that can be gelled in-situ based on Hofmeister sequence, and prepare hydrogel scaffold by using a layer-by-layer 3D printing strategy. Excitingly, after the introduction of Dulbecco's Modified Eagle's medium (DMEM), which is necessary for cell culture, the hydrogel scaffolds show an excellent toughening effect, which matches the needs of cell culture. It's notable that in the whole process of preparation and 3D printing of hydrogel scaffolds, no cross-linking agent, ultraviolet (UV), heating or other exogenous factors are involved, ensuring high biosafety and biocompatibility. After two weeks of 3D culture, millimeter-sized cell spheres are obtained. This work provides an opportunity for the development of short peptide hydrogel bioinks without exogenous factors in 3D printing, tissue engineering, tumor simulant reconstruction and other biomedical fields.

Anion Effects on the Supramolecular Self-Assembly of Cationic Phenylalanine Derivatives

Supramolecular hydrogels have emerged as a class of promising biomaterials for applications such as drug delivery and tissue engineering. Self-assembling peptides have been well studied for such applications, but low molecular weight (LMW) amino acid-derived gelators have attracted interest as low-cost alternatives with similar emergent properties. Fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-Phe) is one such privileged motif often chosen due to its inherent self-assembly potential. Previously, we developed cationic Fmoc-Phe-DAP gelators that assemble into hydrogel networks in aqueous NaCl solutions of sufficient ionic strength. The chloride anions in these solutions screen the cationic charge of the gelators to enable self-assembly to occur. Herein, we report the effects of varying the anions of sodium salts on the gelation potential, nanoscale morphology, and hydrogel viscoelastic properties of Fmoc-Phe-DAP and two of its fluorinated derivatives, Fmoc-3F-Phe-DAP and Fmoc-F₅-Phe-DAP. It was observed that both the anion identity and gelator structure had a significant impact on the self-assembly and gelation properties of these derivatives. Changing the anion identity resulted in significant polymorphism of the nanoscale morphology of the assembled states that was dependent on the chemical structure of the gelator. The emergent viscoelastic character of the hydrogel networks was also found to be reliant on the anion identity and gelator structure. These results demonstrate the complex interplay between the gelator and environment that have a profound and often unpredictable impact on both self-assembly properties and emergent viscoelasticity in supramolecular hydrogels formed by LMW compounds. This work also illustrates the current lack of understanding that limits the rational design of potential biomaterials that will be in contact with complex biological fluids and provides motivation for additional research to correlate the chemical structure of LMW gelators with the structure and emergent properties of the resulting supramolecular assemblies as a function of environment.

Anion-responsive self-assembled hydrogels of a phenylalanine-TREN conjugate allow sequential release of propranolol and doxorubicin

Stimuli-responsive self-assembled and supramolecular hydrogels derived from peptide amphiphiles have opened exciting new avenues in biomedicine and drug delivery. Herein, we screened a series of phenylalanine-amphiphiles possessing polyamine and oxyethylene appendages for their self-assembly and anion-responsiveness and found that the tris(aminoethyl)amine (TREN) containing amphiphile NapF-TREN formed injectable hydrogels that could be disrupted upon the addition of stoichiometric amounts of tetrahedral monovalent anions such as H₂PO₄^- and HSO₄^-, while the addition of other anions such as Cl^-, HPO₄^2-, CO₃^2-, HCO₃^- or SO₄^2- did not affect the gel stability. The anion-gelator interaction was investigated by ¹H and ³¹P NMR spectroscopy as well as by Isothermal Titration Calorimetry (ITC). These studies confirmed a 1 : 1 stoichiometry and revealed negative enthalpy and negative entropy for the binding of H₂PO₄^- with NapF-TREN. Microscopic investigations by TEM, AFM, and SAXS revealed that H₂PO₄^- anions induced a nanofiber-to-nanoglobule morphological change in the aqueous self-assemblies of NapF-TREN. However, upon ageing the samples, slow reformation of the nanofibers was also observed, reflecting the reversibility of the anion-gelator interaction. The anion- and pH-responsive nature of the NapF-TREN hydrogels was exploited to program sequential release of entrapped drugs propranolol and doxorubicin.

Acidic and basic self-assembling peptide and peptide-graphene oxide hydrogels: characterisation and effect on encapsulated nucleus pulposus cells

Extracellular pH can have a profound effect on cell metabolism, gene and protein expression. Nucleus pulposus (NP) cells, for example, under acidic conditions accelerate the production of degradative enzymes and pro-inflammatory cytokines, leading ultimately to intervertebral disc degeneration, a major cause of back pain. Self-assembling peptide hydrogels constitute a well-established class of biomaterials that could be exploited as pH-tunable platform to investigate cell behaviour under normal and non-physiological pH. In this paper we formulated acidic (pH = 4) and basic (pH = 9) hydrogels, from the same octapeptide FEFKFEFK (F8) (F = phenyalanine, E = glutamic acid, K = lysine), to test the effect of non-physiological pH on encapsulated NP cells. Similarly, graphene oxide-containing F8 hydrogels (GO-F8) were formulated as stiffer analogues. Acidic and basic hydrogels showed peculiar morphologies and rheological properties, with all systems able to buffer within 30 minutes of exposure to cell culture media. NP cells seeded in acidic F8 hydrogels showed a more catabolic phenotype compared to basic hydrogels, with increased gene expression of degradative enzymes (MMP-3, ADAMTS-4), neurotrophic factors (NGF and BDNF) and NF-κB p65 phosphorylation. Acidic GO-F8 hydrogels also induced a catabolic response, although milder than basic counterparts and with the highest gene expression of characteristic NP-matrix components, aggrecan and collagen II. In all systems, the cellular response had a peak within 3 days of encapsulation, thereafter decreasing over 7 days, suggesting a 'transitory' effect of hydrogel pH on encapsulated cells. This work gives an insight on the effect of pH (and pH buffering) on encapsulated NP cells and offers new designs of low and high pH peptide hydrogels for 3D cell culture studies. STATEMENT OF SIGNIFICANCE: We have recently shown the potential of graphene oxide - self-assembling peptide hybrid hydrogels for NP cell culture and regeneration. Alongside cell carrier, self-assembling peptide hydrogels actually provide a versatile pH-tunable platform for biological studies. In this work we decided to explore the effect of non-physiological pH (and pH buffering) on encapsulated NP cells. Our approach allows the formulation of both acidic and basic hydrogels, starting from the same peptide sequence. We showed that the initial pH of the scaffold does not affect significantly cell response to encapsulation, but the presence of GO results in lower inflammatory levels and higher NP matrix protein production. This platform could be exploited to study the effect of pH on different cell types whose behaviour can be pH-dependent.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Non-reversible heat-induced gelation of a biocompatible Fmoc-hexapeptide in water

Hydrogel materials which respond to changes in temperature are widely applicable for injectable drug delivery or tissue engineering applications. Here, we report the unsual heat-induced gelation behaviour of a low molecular weight gelator based on an Fmoc-hexapeptide, Fmoc-GFFRGD. We show that Fmoc-GFFRGD forms kinetically stable fibres when mixed with divalent cations (e.g. Ca²⁺). Gelation of the mixture occurs upon heating of the mixture which enables electrostatic screening by the divalent cations and hydrophobic collapse of the fibres to give a self-supporting hydrogel network that shows good biocompatibility with L929 fibroblast cells. This work highlights a unique mechanism to initiate heat-induced gelation which should find opportunities as a gelation trigger for injectable hydrogels or fundamental self-assembly applications.

Hofmeister Series: Insights of Ion Specificity from Amphiphilic Assembly and Interface Property

Hofmeister series (HS), ion specific effect, or lyotropic sequence acts as a pivotal part in a number of biological and physicochemical phenomena, e.g., changing the solubility of hydrophobic solutes, the cloud points of polymers and nonionic surfactants, the activities of various enzymes, the action of ions on an ion-channel, and the surface tension of electrolyte solutions, etc. This review focused on how ion specificity influences the critical micelle concentration (CMC) and how the thermoresponsive behavior of surfactants, and the dynamic transition of the aggregate, controls the aggregate transition and gel formation and tunes the properties of air/water interfaces (Langmuir monolayer and interfacial free energy). Recent progress of the ion specific effect in bulk phase and at interfaces in amphiphilic systems and gels is summarized. Applications and a molecular level theoretical explanation of HS are discussed comprehensively. This review is aimed to supply a fresh and comprehensive understanding of Hofmiester phenomena in surfactants, polymers, colloids, and interface science and to provide a guideline to design the microstructures and templates for preparation of nanomaterials.

Ion-Specific Assembly of Strong, Tough, and Stiff Biofibers

Designing engineering materials with high stiffness and high toughness is challenging as stiff materials tend to be brittle. Many biological materials realize this objective through multiscale (i.e., atomic- to macroscale) mechanisms that are extremely difficult to replicate in synthetic materials. Inspired from the architecture of such biological structures, we here present flow-assisted organization and assembly of renewable native cellulose nanofibrils (CNFs), which yields highly anisotropic biofibers characterized by a unique combination of high strength (1010 MPa), high toughness (62 MJ m-3 ) and high stiffness (57 GPa). We observed that properties of the fibers are primarily governed by specific ion characteristics such as hydration enthalpy and polarizability. A fundamental facet of this study is thus to elucidate the role of specific anion binding following the Hofmeister series on the mechanical properties of wet fibrillar networks, and link this to the differences in properties of dry nanostructured fibers. This knowledge is useful for rational design of nanomaterials and is critical for validation of specific ion effect theories. The bioinspired assembly demonstrated here is relevant example for designing high-performance materials with absolute structural control.

A stimuli responsive multifunctional ZMOF based on an unorthodox polytopic ligand: reversible thermochromism and anion triggered metallogelation

A novel Cd(ii)-ZMOF with a unique sodalite topology has been successfully designed and synthesized using a flexible polytopic compartmental ligand. The microporous complex contains 1D hexagonal channels with large void space for the accommodation of guest molecules. This work demonstrates a new paradigm for designing and functionalizing zeolite-type frameworks. The triconnected linker forms coordination polymer gels in the presence of Cd2+ and the gelation was controlled by the presence of specific anions. They possess good thermal stability and exhibit thixotropic behavior. Optical properties revealed that the complex is exclusively thermochromic and undergoes a reversible transition at 80 °C, changing its color from yellow to orange red. Owing to the large voids in the framework, the complex can serve as a host for use in dye adsorption. Thus this paper offers a new MOF material with exceptional chromic behavior, gelation properties and adsorption capability for the development of high performance multifunctional materials.

The Hofmeister series: Specific ion effects in aqueous polymer solutions

Specific ion effects in aqueous polymer solutions have been under active investigation over the past few decades. The current state-of-the-art research is primarily focused on the understanding of the mechanisms through which ions interact with macromolecules and affect their solution stability. Hence, we herein first present the current opinion on the sources of ion-specific effects and review the relevant studies. This includes a summary of the molecular mechanisms through which ions can interact with polymers, quantification of the affinity of ions for the polymer surface, a thermodynamic description of the effects of salts on polymer stability, as well as a discussion on the different forces that contribute to ion-polymer interplay. Finally, we also highlight future research issues that call for further scrutiny. These include fundamental questions on the mechanisms of ion-specific effects and their correlation with polymer properties as well as a discussion on the specific ion effects in more complex systems such as mixed electrolyte solutions.

Hofmeister Anion-Induced Tunable Rheology of Self-Healing Supramolecular Hydrogels

ᅟ: Physical gelation behaviors of a series of D-gluconic acetal-based derivatives bearing fatty alkyl amine moieties have been investigated. One of these molecules exhibits excellent gelation behaviors in water, and the resultant hydrogels are found to display self-healing properties. Interestingly, the elasticity and strength of the resulting gel can be tuned by the addition of different kinds of Hofmeister salts. The gel formation mechanism was proposed based on the analysis of FT-IR,1HNMR, and XRD, indicating that the main driving force for the self-assembly was the π-π stacking of the benzene rings in the aqueous solution system. Overall, our research provides an efficient approach for facilely tuning the properties of the D-gluconic acetal-based hydrogel. ᅟ.

Glucose-triggered dissolution of phenylboronic acid-functionalized cholesterol-based niosomal self-assembly for tuneable drug release

Cholesterol-containing phenylboronic acid-based niosomal self-assemblies showed glucose-responsive dissolution and release of an encapsulated drug.

Thermo-Switchable de Novo Ionic Liquid-Based Gelators with Dye-Absorbing and Drug-Encapsulating Characteristics

An ionic liquid-based surfactant with ester functionality self-aggregates in an aqueous medium and forms ionogels at 8.80% (w/v) concentration at physiological pH. The ionogel exhibited a remarkable change in its appearance with temperature from fibrillar opaque to transparent because of the dynamic changes within its supramolecular structure. This gel-to-gel phase transition occurs below the melting point of the solid ionic liquid. The ionogels were investigated using turbidity, differential scanning calorimetry, scanning electron microscopy (SEM), field emission SEM (FE-SEM), inverted microscopy, transmission electron microscopy imaging, Fourier transform infrared spectroscopy, and rheological measurements. The fibrillar opaque ionogel and transparent ionogel were studied for their ability to absorb dyes (methyl orange and crystal violet) and to encapsulate drugs (diclofenac sodium and imatinib mesylate).

Insights into the aggregation-induced emission of 1,8-naphthalimide-based supramolecular hydrogels

The study of aggregation-induced emission (AIE) of a series of 1,8-naphthalimide derivatives in aqueous media is reported herein. Some of these molecules constitute the first examples of 1,8-naphthalimide-containing amino acid derivatives that form hydrogels with excellent photophysical and mechanical properties. The present study provides further insights for the rational design of water-compatible stimuli-responsive photonic materials presenting AIE. AIE was quantitatively evaluated by measuring the fluorescence quantum yields of the molecules. Gelators 1 and 2 exhibit self-assembled fibrillar morphologies and present the best performance regarding the AIE effect, showing a remarkable enhancement in fluorescence intensity of 4700% and reaching a notable fluorescence quantum yield (Φf) of 30%. Non-gelator molecules 6 and 7 form nanoparticles, which also present AIE, but with emissions corresponding to their excimers. Therefore, the AIE intensity and wavelength are regulated by the type of aggregate morphology: fibers, nanoparticles or soluble species.

Applying low-molecular weight supramolecular gelators in an environmental setting - self-assembled gels as smart materials for pollutant removal

This review explores supramolecular gels as materials for environmental remediation. These soft materials are formed by self-assembling low-molecular-weight building blocks, which can be programmed with molecular-scale information by simple organic synthesis. The resulting gels often have nanoscale 'solid-like' networks which are sample-spanning within a 'liquid-like' solvent phase. There is intimate contact between the solvent and the gel nanostructure, which has a very high effective surface area as a result of its dimensions. As such, these materials have the ability to bring a solid-like phase into contact with liquids in an environmental setting. Such materials can therefore remediate unwanted pollutants from the environment including: immobilisation of oil spills, removal of dyes, extraction of heavy metals or toxic anions, and the detection or removal of chemical weapons. Controlling the interactions between the gel nanofibres and pollutants can lead to selective uptake and extraction. Furthermore, if suitably designed, such materials can be recyclable and environmentally benign, while the responsive and tunable nature of the self-assembled network offers significant advantages over other materials solutions to problems caused by pollution in an environmental setting.

Gels with sense: supramolecular materials that respond to heat, light and sound

Advances in the field of supramolecular chemistry have made it possible, in many situations, to reliably engineer soft materials to address a specific technological problem. Particularly exciting are "smart" gels that undergo reversible physical changes on exposure to remote, non-invasive environmental stimuli. This review explores the development of gels which are transformed by heat, light and ultrasound, as well as other mechanical inputs, applied voltages and magnetic fields. Focusing on small-molecule gelators, but with reference to organic polymers and metal-organic systems, we examine how the structures of gelator assemblies influence the physical and chemical mechanisms leading to thermo-, photo- and mechano-switchable behaviour. In addition, we evaluate how the unique and versatile properties of smart materials may be exploited in a wide range of applications, including catalysis, crystal growth, ion sensing, drug delivery, data storage and biomaterial replacement.

Colorimetric and fluorometric turn-on sensor for selective detection of fluoride ions: sol–gel transition studies and theoretical insights

The sol–gel transition properties of receptor R1 aiding the selective detection of fluoride ions.

Nonlinear Effects in Multicomponent Supramolecular Hydrogels

Multicomponent low molecular weight gels are useful for a range of applications. However, when mixing two components, both of which can independently form a gel, there are many potential scenarios. There is a limited understanding as to how to control and direct the assembly. Here, we focus on a pH-triggered two-component system. At high pH, colloidal structures are formed, and there is a degree of mixing of the two gelators. As the pH is decreased, there is a complex situation, where one gelator directs the assembly in a "sergeants and soldiers" manner. The second gelator is not fully incorporated, and the remainder forms an independent network. The result is that there is a nonlinear dependence on the final mechanical properties of the gels, with the storage or loss modulus being very dependent on the absolute ratio of the two components in the system.

A new class of organogelators based on triphenylmethyl derivatives of primary alcohols: hydrophobic interactions alone can mediate gelation

In the present work, we have explored the use of the triphenylmethyl group, a commonly used protecting group for primary alcohols as a gelling structural component in the design of molecular gelators. We synthesized a small library of triphenylmethyl derivatives of simple primary alcohols and studied their gelation properties in different solvents. Gelation efficiency for some of the derivatives was moderate to excellent with a minimum gelation concentration ranging between 0.5–4.0% w/v and a gel–sol transition temperature range of 31–75 °C. 1,8-Bis(trityloxy)octane, the ditrityl derivative of 1,8-octanediol was the most efficient organogelator. Detailed characterizations of the gel were carried out using scanning electron microscopy, FTIR spectroscopy, rheology and powder XRD techniques. This gel also showed a good absorption profile for a water soluble dye. Given the non-polar nature of this molecule, gel formation is likely to be mediated by hydrophobic interactions between the triphenylmethyl moieties and alkyl chains. Possible self-assembled packing arrangements in the gel state for 1,8-bis(trityloxy)octane and (hexadecyloxymethanetriyl)tribenzene are presented. Results from this study strongly indicate that triphenylmethyl group is a promising gelling structural unit which may be further exploited in the design of small molecule based gelators.

Probing the surface chemistry of self-assembled peptide hydrogels using solution-state NMR spectroscopy

The surface chemistry of self-assembled hydrogel fibres - their charge, hydrophobicity and ion-binding dynamics - is recognised to play an important role in determining how the gels develop as well as their suitability for different applications. However, to date there are no established methodologies for the study of this surface chemistry. Here, we demonstrate how solution-state NMR spectroscopy can be employed to measure the surface chemical properties of the fibres in a range of hydrogels formed from N-functionalised dipeptides, an effective and versatile class of gelator that has attracted much attention. By studying the interactions with the gel fibres of a diverse range of probe molecules and ions, we can simultaneously study a number of surface chemical properties of the NMR invisible fibres in an essentially non-invasive manner. Our results yield fresh insights into the materials. Most notably, gel fibres assembled using different tiggering methods bear differing amounts of negative charge as a result of a partial deprotonation of the carboxylic acid groups of the gelators. We also demonstrate how chemical shift imaging (CSI) techniques can be applied to follow the formation of hydrogels along chemical gradients. We apply CSI to study the binding of Ca²⁺ and subsequent gelation of peptide assemblies at alkaline pH. Using metal ion-binding molecules as probes, we are able to detect the presence of bound Ca²⁺ ions on the surface of the gel fibres. We briefly explore how knowledge of the surface chemical properties of hydrogels could be used to inform their practical application in fields such as drug delivery and environmental remediation.

Salt Tunable Rheology of Thixotropic Supramolecular Organogels and Their Applications for Crystallization of Organic Semiconductors

Physical gelation behaviors of a series of novel bisurea-based derivatives bearing fatty alkyl tertiary amine moieties have been explored in water and common organic solvents. One of these amines exhibits very good thixotropic gels in apolar aromatic solvents (e.g., xylenes). The corresponding sol-gel transition is instantaneous and could be repeated for at least 50 cycles. Interestingly, the elasticity and strength of the resulting gels can be remarkably enhanced initially by the addition of a trace amount of tetrabutylammonium acetate (TBA) followed by a subsequent drop with further salt addition. Temperature-dependent ¹H NMR confirmed that hydrogen bonding is the main driving force for the physical gelation. TEM, rheology, ¹H NMR titration, and examination of critical gelation concentration (CGC) reveal that the phenomenon is due to the dominated effects, the salting out effect at lower TBA concentration, or the anion-urea hydrogen bonding at higher TBA concentration. Furthermore, the obtained transparent gels in this work can be used as good media for growing crystals of several organic semiconductors.

Peptide-Based Molecular Hydrogels as Supramolecular Protein Mimics

This Minireview concerns recent advances in the design, synthesis, and application of low molecular-weight peptidic hydrogelators. The sequence-specific combinations of amino acid side chain functionalities combined with hydrogen bonding of amide backbones and hydrophobic (aromatic) capping groups give these peptidic molecules the intrinsic tendency to self-assemble. The most prevalent designs include N-capped amino acid residues, bolamphiphilic peptides, and amphipathic peptides. Factors such as hydrophobic effects, the Hofmeister effect, and tunable ionization influence their aggregation properties. The self-assembly of simple bio-inspired building blocks into higher organized structures allows comparisons to be drawn with proteins and their complex functionalities, providing preliminary insights into complex biological functions and also enabling their application in a wide range of fields including catalysis, biomedical applications, and mimicry of natural dissipative systems. The Minireview is concluded by a short summary and outlook, highlighting the advances and steps required to bridge the gaps in the understanding of such systems.

Emergent Catalytic Behavior of Self-Assembled Low Molecular Weight Peptide-Based Aggregates and Hydrogels

We report a series of short peptides possessing the sequence (FE)n or (EF)n and bearing l-proline at their N-terminus that self-assemble into high aspect ratio aggregates and hydrogels. We show that these aggregates are able to catalyze the aldol reaction, whereas non-aggregated analogues are catalytically inactive. We have undertaken an analysis of the results, considering the accessibility of catalytic sites, pKa value shifts, and the presence of hydrophobic pockets. We conclude that the presence of hydrophobic regions is indeed relevant for substrate solubilization, but that the active site accessibility is the key factor for the observed differences in reaction rates. The results presented here provide an example of the emergence of a new chemical property caused by self-assembly, and support the relevant role played by self-assembled peptides in prebiotic scenarios. In this sense, the reported systems can be seen as primitive aldolase I mimics, and have been successfully tested for the synthesis of simple carbohydrate precursors.

Coordination-induced gelation of an l-glutamic acid Schiff base derivative: the anion effect and cyanide-specific selectivity

Three metallogels, ZnG, CuG and Zn-CuG, were prepared in the presence of specific anions, with their efficacy linked to the Hofmeister series. Importantly, Zn-CuG gel could fluorescently detect CN⁻ with specific selectivity.

A novel smart supramolecular organic gelator exhibiting dual-channel responsive sensing behaviours towards fluoride ion via gel–gel states

A smart organic gelator G-16 showed robust gelation as organogel OG and metallogel OG-Zn. Both OG and OG-Zn exhibited different sensing mode towards F⁻. OG-Zn displayed unique selectivity for F⁻ and formed OG-Zn-F gel while OG selectively formed OG-F gel via AIE.

Heat-set gels formed from easily accessible gelators of a succinamic acid derivative (SAD) and a primary alkyl amine (R-NH2)

Currently, the design and construction of an intelligent stimuli-responsive gel system is still a significant challenge. We present here a new gel system from which the formation of heat-set gels, conventional gels and irreversible heat-set gels can be achieved in aromatic solvents. This gel system is based on two-component gelators containing a succinamic acid derivative (SAD) and a primary alkyl amine (R-NH2). With the increase of temperature to 85 °C, a rarely reported reversible heat-set gel (gel formation with the increase of temperature) is afforded. Upon addition of fatty acids into two-component gelators, a conventional gel (gel formation with the decrease of temperature) is formed. When the fatty acid is replaced with dicarboxylic acid, a new heat-set gel is generated, which is irreversible and thermally super-stable. X-ray diffraction analysis reveals that the formation of a reversible heat-set gel relies on electrostatic interactions, hydrogen bonds, and hydrophobic interactions. These two-component gelators show a perfect gel system for the formation of diverse gels including heat-set gels, conventional gels and irreversible heat-set gels. The tunable strategy demonstrated in this letter may provide a new way for creation of more functional gels in gel science.

A low molecular weight hydrogel with unusual gel aging

We describe a dipeptide hydrogel with unusual aging characteristics. Over time, a transformation from a turbid gel to a transparent gel occurs which is initiated from the air-water interface. Here, we investigate this transition and discuss the implications of this aging on the bulk properties of the gel.

Using molecular rotors to probe gelation

A series of fluorescent probes, including a number of molecular rotors, have been used to follow the self-assembly of dipeptide-based low molecular weight gelators. We show that these probes can be used to gain an insight into the assembly process. Thioflavin T, a commonly used stain for β-sheets, appears to act as a molecular rotor in these gelling systems, with the fluorescence data closely matching that of other rotors. The molecular rotor was incorporated into an assay system with glucose oxidase to enable glucose-concentration specific gelation and hence generating a fluorescent output. Applying this system to urine from patients with various levels of glycosuria (a symptom of diabetes), it was found to provide excellent correlation with different clinical assessments of diabetes. This demonstrates a new concept in gelation-linked biosensing for a real clinical problem.

Sol–gel transition accelerated by the co-assembly of two components in supramolecular hydrogels

N-Palmitoyl-Gly-His (PalGH) and glycerol monopalmitate (GMP) in water co-assembled into fibrils with twisted ribbon structures and formed a homogeneous network, resulting in gel formation. The mixture exhibits sol–gel transition while a gel made from only PalGH does not.