Modeling the IR Spectra of Aqueous Metal Carboxylate Complexes: Correlation between Bonding Geometry and Stretching Mode Wavenumber Shifts

Synthesis and stability of the [45Ti]Ti-DOTA complex: en route towards aza-macrocyclic 45Ti-based radiopharmaceuticals

We report the use of DOTA as a chelator for titanium. The resulting complex is fully characterised and in vitro stability studies reveal its high kinetic inertness against transmetallation and transchelation. The radiolabeling of DOTA with 45Ti, via a guaiacol-based liquid-liquid extraction method, leads to a high radiochemical conversion up to 98%.

Structural and Vibrational Properties of Carboxylates Intercalated into Layered Double Hydroxides: A Joint Computational and Experimental Study

Layered double hydroxides (LDHs) are fascinating clay-like materials that display versatile properties, making them an extremely fertile playground for diverse applications, ranging from bio-compatible materials to the pharmaceutical industry to catalysis and photocatalysis. When intercalating organic and bio-organic species between the inorganic layers, such materials are named hybrid LDHs. The structure-property relation in these systems is particularly relevant, since most of the properties of the materials may be fine-tuned if a comprehensive understanding of the microscopic structure in the interlamellar space is achieved, especially with respect to the reorganization under water uptake (swelling). In this work, we combined experiments and simulations to rationalize the behavior of LDHs intercalating three carboxylates, the general structure of which can be given as [Mg4Al2(OH)12]A2-·XH2O (with A2- = succinate, aspartate, or glutamate and X representing increasing water content). Following this strategy, we were able to provide an interpretation of the different shapes observed for the experimental water adsorption isotherms and for the evolution of the infrared carboxylate band of the anions. Apart from small differences, due to the different reorganization of the conformational space under confinement, the behavior of the two amino acids is very similar. However, such behavior is quite different in the case of succinate. We were able to describe the different response of the anions, which has a significant impact on the isotherm and on the size of the interlamellar region, in terms of a different interaction mechanism with the inorganic layer.

Lanthanide transport in angstrom-scale MoS2-based two-dimensional channels

Rare earth elements (REEs), critical to modern industry, are difficult to separate and purify, given their similar physicochemical properties originating from the lanthanide contraction. Here, we systematically study the transport of lanthanide ions (Ln3+) in artificially confined angstrom-scale two-dimensional channels using MoS2-based building blocks in an aqueous environment. The results show that the uptake and permeability of Ln3+ assume a well-defined volcano shape peaked at Sm3+. This transport behavior is rooted from the tradeoff between the barrier for dehydration and the strength of interactions of lanthanide ions in the confinement channels, reminiscent of the Sabatier principle. Molecular dynamics simulations reveal that Sm3+, with moderate hydration free energy and intermediate affinity for channel interaction, exhibit the smallest dehydration degree, consequently resulting in the highest permeability. Our work not only highlights the distinct mass transport properties under extreme confinement but also demonstrates the potential of dialing confinement dimension and chemistry for greener REEs separation.

Orientational Behavior and Vibrational Response of Glycine at Aqueous Interfaces

Aqueous glycine plays many different roles in living systems, from being a building block for proteins to being a neurotransmitter. To better understand its fundamental behavior, we study glycine's orientational behavior near model aqueous interfaces, in the absence and presence of electric fields and biorelevant ions. To this purpose, we use a surface-specific technique called heterodyne-detected vibrational sum-frequency generation spectroscopy (HD-VSFG). Using HD-VSFG, we directly probe the symmetric and antisymmetric stretching vibrations of the carboxylate group of zwitterionic glycine. From their relative amplitudes, we infer the zwitterion's orientation near surfactant-covered interfaces and find that it is governed by both electrostatic and surfactant-specific interactions. By introducing additional ions, we observe that the net orientation is altered by the enhanced ionic strength, indicating a change in the balance of the electrostatic and surfactant-specific interactions.

Nanoscale Insights into the Interaction Mechanism Underlying the Adsorption and Retention of Heavy Metal Ions by Humic Acid

The mobility and distribution of heavy metal ions (HMs) in aquatic environments are significantly influenced by humic acid (HA), which is ubiquitous. A quantitative understanding of the interaction mechanism underlying the adsorption and retention of HMs by HA is of vital significance but remains elusive. Herein, the interaction mechanism between HA and different types of HMs (i.e., Cd(II), Pb(II), arsenate, and chromate) was quantitatively investigated at the nanoscale. Based on quartz crystal microbalance with dissipation tests, the adsorption capacities of Pb(II), Cd(II), As(V), and Cr(VI) ionic species on the HA surface were measured as ∼0.40, ∼0.25, ∼0.12, and ∼0.02 nmol cm-2, respectively. Atomic force microscopy force results showed that the presence of Pb(II)/Cd(II) cations suppressed the electrostatic double-layer repulsion during the approach of two HA surfaces and the adhesion energy during separation was considerably enhanced from ∼2.18 to ∼5.05/∼4.18 mJ m-2. Such strong adhesion stems from the synergistic metal-HA complexation and cation-π interaction, as evidenced by spectroscopic analysis and theoretical simulation. In contrast, As(V)/Cr(VI) oxo-anions could form only weak hydrogen bonds with HA, resulting in similar adhesion energies for HA-HA (∼2.18 mJ m-2) and HA-As(V)/Cr(VI)-HA systems (∼2.26/∼1.96 mJ m-2). This work provides nanoscale insights into quantitative HM-HA interactions, improving the understanding of HMs biogeochemical cycling.

Anomalously enhanced ion transport and uptake in functionalized angstrom-scale two-dimensional channels

Emulating angstrom-scale dynamics of the highly selective biological ion channels is a challenging task. Recent work on angstrom-scale artificial channels has expanded our understanding of ion transport and uptake mechanisms under confinement. However, the role of chemical environment in such channels is still not well understood. Here, we report the anomalously enhanced transport and uptake of ions under confined MoS2-based channels that are ~five angstroms in size. The ion uptake preference in the MoS2-based channels can be changed by the selection of surface functional groups and ion uptake sequence due to the interplay between kinetic and thermodynamic factors that depend on whether the ions are mixed or not prior to uptake. Our work offers a holistic picture of ion transport in 2D confinement and highlights ion interplay in this regime.

Hydration effects on the vibrational properties of carboxylates: From continuum models to QM/MM simulations

The presence of carboxyl groups in a molecule delivers an affinity to metal cations and a sensitivity to the chemical environment, especially for an environment that can give rise to intermolecular hydrogen bonds. Carboxylate groups can also induce intramolecular interactions, such as the formation of hydrogen bonds with donor groups, leading to an impact on the conformational space of biomolecules. In the latter case, the protonation state of the amino groups plays an important role. In order to provide an accurate description of the modifications induced in a carboxylated molecule by the formation of hydrogen bonds, one needs a compromise between a quantum chemical description of the system and the necessity to take into account explicit solvent molecules. In this work, we propose a bottom-up approach to study the conformational space and the carboxylate stretching band of (bio)organic anions. Starting from the anions in a continuum solvent, we then move to calculations using a microsolvation approach including one explicit water molecule per polar group, immersed in a continuum. Finally, we run QM/MM molecular dynamics simulations to analyze the solvation properties and to explore the anions conformational space. The results thus obtained are in good agreement with the description given by the microsolvation approach and they bring a more detailed description of the solvation shell and of the intermolecular hydrogen bonds.

Nanozymes with Peroxidase-like Activity for Ferroptosis-Driven Biocatalytic Nanotherapeutics of Glioblastoma Cancer: 2D and 3D Spheroids Models

Glioblastoma (GBM) is the most common primary brain cancer in adults. Despite the remarkable advancements in recent years in the realm of cancer diagnosis and therapy, regrettably, GBM remains the most lethal form of brain cancer. In this view, the fascinating area of nanotechnology has emerged as an innovative strategy for developing novel nanomaterials for cancer nanomedicine, such as artificial enzymes, termed nanozymes, with intrinsic enzyme-like activities. Therefore, this study reports for the first time the design, synthesis, and extensive characterization of innovative colloidal nanostructures made of cobalt-doped iron oxide nanoparticles chemically stabilized by a carboxymethylcellulose capping ligand (i.e., Co-MION), creating a peroxidase-like (POD) nanozyme for biocatalytically killing GBM cancer cells. These nanoconjugates were produced using a strictly green aqueous process under mild conditions to create non-toxic bioengineered nanotherapeutics against GBM cells. The nanozyme (Co-MION) showed a magnetite inorganic crystalline core with a uniform spherical morphology (diameter, 2R = 6-7 nm) stabilized by the CMC biopolymer, producing a hydrodynamic diameter (H_D) of 41-52 nm and a negatively charged surface (ZP~-50 mV). Thus, we created supramolecular water-dispersible colloidal nanostructures composed of an inorganic core (Cox-MION) and a surrounding biopolymer shell (CMC). The nanozymes confirmed the cytotoxicity evaluated by an MTT bioassay using a 2D culture in vitro of U87 brain cancer cells, which was concentration-dependent and boosted by increasing the cobalt-doping content in the nanosystems. Additionally, the results confirmed that the lethality of U87 brain cancer cells was predominantly caused by the production of toxic cell-damaging reactive oxygen species (ROS) through the in situ generation of hydroxyl radicals (·OH) by the peroxidase-like activity displayed by nanozymes. Thus, the nanozymes induced apoptosis (i.e., programmed cell death) and ferroptosis (i.e., lipid peroxidation) pathways by intracellular biocatalytic enzyme-like activity. More importantly, based on the 3D spheroids model, these nanozymes inhibited tumor growth and remarkably reduced the malignant tumor volume after the nanotherapeutic treatment (ΔV~40%). The kinetics of the anticancer activity of these novel nanotherapeutic agents decreased with the time of incubation of the GBM 3D models, indicating a similar trend commonly observed in tumor microenvironments (TMEs). Furthermore, the results demonstrated that the 2D in vitro model overestimated the relative efficiency of the anticancer agents (i.e., nanozymes and the DOX drug) compared to the 3D spheroid models. These findings are notable as they evidenced that the 3D spheroid model resembles more precisely the TME of "real" brain cancer tumors in patients than 2D cell cultures. Thus, based on our groundwork, 3D tumor spheroid models might be able to offer transitional systems between conventional 2D cell cultures and complex biological in vivo models for evaluating anticancer agents more precisely. These nanotherapeutics offer a wide avenue of opportunities to develop innovative nanomedicines for fighting against cancerous tumors and reducing the frequency of severe side effects in conventionally applied chemotherapy-based treatments.

Assemblies of poly(N-vinyl-2-pyrrolidone)-based double hydrophilic block copolymers triggered by lanthanide ions: characterization and evaluation of their properties as MRI contrast agents

Because of the formation of specific antibodies to poly(ethylene glycol) (PEG) leading to life-threatening side effects, there is an increasing need to develop alternatives to treatments and diagnostic methods based on PEGylated copolymers. Block copolymers comprising a poly(N-vinyl-2-pyrrolidone) (PVP) segment can be used for the design of such vectors without any PEG block. As an example, a poly(acrylic acid)-block-poly(N-vinyl-2-pyrrolidone) (PAA-b-PVP) copolymer with controlled composition and molar mass is synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Mixing this copolymer with lanthanide cations (Gd³⁺, Eu³⁺, Y³⁺) leads to the formation of hybrid polyion complexes with increased stability, preventing the lanthanide cytotoxicity and in vitro cell penetration. These new nanocarriers exhibit enhanced T₁ MRI contrast, when intravenously administered into mice. No leaching of gadolinium ions is detected from such hybrid complexes.

Spectroscopic Characterization of the Divalent Metal Docking Motif to Isolated Cyanobenzoate: Direct Observation of Tridentate Binding to ortho-Cyanobenzoate and Implications for the CN Response

Cryogenic ion vibrational spectra of D₂-tagged cyanobenzoate (CBA) derivatives are obtained and analyzed to characterize the intrinsic spectroscopic responses of the -CO₂^- headgroup to its location on the ring in both the isolated anions and the cationic complexes with divalent metal ions, M²⁺ (M = Mg, Ca, Sr). The benzonitrile functionality establishes the different ring isomers (para, meta, ortho) according to the location of the carboxylate and provides an additional reporter on the molecular response to the proximal charge center. The aromatic carboxylates display shifts slightly smaller than those observed for a related aliphatic system upon metal ion complexation. Although the CBA anions display very similar band patterns for all three ring positions, upon complexation with metal ions, the ortho isomer yields dramatically different spectral responses in both the -CO₂^- moiety and the CN group. This behavior is traced to the emergence of a tridentate binding motif unique to the ortho isomer in which the metal ions bind to both the oxygen atoms of the carboxylate group and the N atom of the cyano group. In that configuration, the -CO₂^- moiety is oriented perpendicular to the phenyl ring, and the CN stretching fundamental is both strong and red-shifted relative to its behavior in the isolated neutral. The behaviors of the metal-bound ortho complexes occur in contrast to the usual blue shifts associated with "Lewis" type binding of metal ions end-on to -CN. The origins of these spectroscopic features are analyzed with the aid of electronic structure calculations, which also explore differences expected for complexation of monovalent cations to the ortho carboxylate. The resulting insights have implications for understanding the balance between electrostatic and steric interactions at metal binding sites in chemical and biological systems.

Extrinsic Point Defects in TiO2-Acetylacetone Charge-Transfer Complex and Their Effects on Optical and Photochemical Properties

TiO₂-based visible-light-sensitive nanomaterials are widely studied for photocatalytic applications under UV-Vis radiation. Among the mechanisms of visible-light sensitization, extrinsic oxygen vacancies have been introduced into TiO₂ and charge-transfer complexes (CTCs) have been formed between chelating ligands, such as acetylacetone, and nanocrystalline TiO₂ (TiO₂-ACAC). However, the influence of extrinsic oxygen vacancies on the photocatalytic performance of TiO₂-based CTCs is unknown. In this work, surface/bulk extrinsic oxygen vacancies were introduced into TiO₂-ACAC through calcination at 270 °C under static air, argon, and hydrogen atmospheres. TiO₂-ACAC CTCs were characterized by X-ray powder diffraction, thermogravimetric analysis, diffuse-reflectance spectroscopy, photoluminescence, electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy techniques. The correlation between EPR-spin trapping and tetracycline (TC) photodegradation, using scavengers, highlighted the key role of the superoxide radical in TC degradation by TiO₂-ACAC CTCs under low-power visible-light radiation. The increased extrinsic oxygen vacancies concentration was not beneficial for the photocatalytic performance of TiO₂ CTCs, since bulk extrinsic oxygen vacancies additionally act as recombination centers. In fact, the TiO₂-ACAC CTC with the lowest extrinsic oxygen vacancies concentration exhibited the highest photocatalytic performance for TC degradation due to an adequate distribution of extrinsic bulk oxygen vacancies, which led to the trapped electrons undergoing repeated hopping, reducing the recombination rates and improving the efficiency in superoxide radicals production. Our findings indicated that TiO₂-ACAC CTCs are able to degrade pollutants via interactions with electronic holes and principally superoxide radicals and also, provided fundamental information about the influence of surface/bulk extrinsic oxygen vacancies on the photocatalytic performance, lattice parameters, and optical and photochemical properties of TiO₂-based CTCs.

Influence of citrate/tartrate on chromite crystallization behavior and its potential environmental implications

The ferrite process has been developed to purify wastewater containing heavy metal ions and recycle valuable metals by forming chromium ferrite. However, organic matter has an important influence on the crystallization behavior and stability of chromite synthesized from chromium-containing wastewater. We focused on the influence and effect mechanism of two typical organic acid salts (citrate (CA) and tartrate (TA)) on the process of chromium mineralization. It was found that the presence of organic matter leads to the increase of the residual content of Cr in CA system (0.50 mmol/L) and TA system (0.61 mmol/L) in the solution, and the removal of chromium was mainly due to the surface adsorption of Fe(III) hydrolysate. The decreased crystallinity of mineralized products is ascribed to the completion of organic compounds with Fe(II) and Fe(III), which hinders the formation of ferrite precursors. There was bidentate and monodentate chelation between -COO- and metal ions in the CA system and TA system respectively, which resulted in a stronger affinity between CA and iron. This study provides the underlying mechanism for Cr(III) solid oxidation by the ferrite method in an organic matter environment and is of great significance to prevent and control chromium pollution in the environment.

Secondary Mineral Formation and Carbon Dynamics during FeS Oxidation in the Presence of Dissolved Organic Matter

Iron (Fe) minerals constitute a major control on organic carbon (OC) storage in soils and sediments. While previous research has mainly targeted Fe (oxyhydr)oxides, the impact of Fe sulfides and their subsequent oxidation on OC dynamics remains unresolved in redox-fluctuating environments. Here, we investigated the impact of dissolved organic matter (DOM) on FeS oxidation and how FeS and its oxidation may alter the retention and nature of DOM. After the anoxic reaction of DOM with FeS, FeS preferentially removed high-molecular-weight and nitrogen-rich compounds and promoted the formation of aqueous sulfurized organic molecules, according to Fourier transform-ion cyclotron resonance-mass spectrometry (FT-ICR-MS) analysis. When exposed to O₂, FeS oxidized to nanocrystalline lepidocrocite and additional aqueous sulfurized organic compounds were generated. The presence of DOM decreased the particle size of the resulting nano-lepidocrocite based on Mössbauer spectroscopy. Following FeS oxidation, most solid-phase OC remained associated with the newly formed lepidocrocite via a monodentate chelating mechanism (based on FTIR analysis), and FeS oxidation caused only a slight increase in the solubilization of solid-phase OC. Collectively, this work highlights the under-appreciated role of Fe sulfides and their oxidation in driving OC transformation and preservation.

Direct and Water-Mediated Adsorption of Stabilizers on SERS-Active Colloidal Bimetallic Plasmonic Nanomaterials: Insight into Citrate-AuAg Interactions from DFT Calculations

In previous studies, AuAg colloidal nanostar formulations were developed with the two-fold aim of producing optimized surface-enhanced Raman spectroscopy (SERS) substrates and investigating the nature of the capping process itself. Findings demonstrated that the nanoparticle metals are alloyed and neutral, and capping by stabilizers occurs via chemisorption. This study utilizes citrate as the model stabilizer and investigates the mechanistic aspects of its interaction with mono- (Au₂₀) and bimetallic (Au₁₉Ag) surfaces by density functional theory (DFT) calculations. Citrate was modeled according to the colloid's pH and surrounded by a water and sodium first solvation shell. A population of stable cluster-citrate structures was obtained, and energies were refined at the uB3LYP//LANL2TZ(f)/cc-pVTZ level of theory. Solvation was accounted for both explicitly and implicitly by the application of the continuum model SMD. Results indicate that both direct binding and binding by water proxy through the charge-transfer complex formation are thermodynamically favorable. Water participation in citrate adsorption is supported by the adsorption behavior observed experimentally and the comparison between experimental and DFT-simulated IR spectra. Vibrational mode analysis suggests the possible presence of water within a crystal in dried nanostar residues. All ΔG_ads(aq) indicate a weak chemisorptive process, leading to the hypothesis that citrate could be displaced by analytes during SERS measurements.

N-Hydroxy-N-oxide photoinduced tautomerization and excitation wavelength dependent luminescence of ESIPT-capable zinc(II) complexes with a rationally designed 1-hydroxy-2,4-di(pyridin-2-yl)-1H-imidazole ESIPT-ligand

The ability of 1-hydroxy-1H-imidazoles to undergo proton transfer processes and to exist in N-hydroxy and N-oxide tautomeric forms can be used in coordination chemistry for the design of ESIPT-capable complexes. A series of ESIPT-capable zinc(II) complexes [Zn(HL)Hal2] (Hal = Cl, Br, I) with a rationally designed ESIPT-ligand 1-hydroxy-5-methyl-2,4-di(pyridin-2-yl)-1H-imidazole (HL) featuring spatially separated metal binding and ESIPT sites have been synthesized and characterized. Crystals of these compounds consist of a mixture of two isomers of [Zn(HL)Hal2]. Only a major isomer has a short intramolecular hydrogen bond O-H⋯N as a pre-requisite for ESIPT. In the solid state, the complexes [Zn(HL)Hal2] demonstrate temperature- and excitation wavelength dependent fluorescence in the cyan region due to the interplay of two intraligand fluorescence channels with excited state lifetimes spanning from 0.2 to 4.3 ns. The coordination of HL by Zn²⁺ ions results in an increase in the photoluminescence efficiency, and the photoluminescence quantum yields (PLQYs) of the complexes reach 12% at λ_ex = 300 nm and 27% at λ_ex = 400 nm in comparison with the PLQY of free HL of ca. 2%. Quantum chemical calculations indicate that N-hydroxy-N-oxide phototautomerization is both thermodynamically and kinetically favourable in the S₁ state for [Zn(HL)Hal2]. The proton transfer induces considerable geometrical reorganizations and therefore results in large Stokes shifts of ca. 230 nm. In contrast, auxiliary ESIPT-incapable complexes [ZnL₂][Zn(OAc)₂]₂·2H₂O and [ZnL₂][ZnCl₂]₂·4H₂O with the deprotonated ligand exhibit excitation wavelength independent emission in the violet region with the Stokes shift reduced to ca. 130 nm.

Electroactive Fe-biochar for redox-related remediation of arsenic and chromium: Distinct redox nature with varying iron/carbon speciation

Electroactive Fe-biochar has attracted significant attention for As(III)/Cr(VI) immobilization through redox reactions, and its performance essentially lies in the regulation of various Fe/C moieties for desired redox performance. Here, a series of Fe-biochar with distinct Fe/C speciation were rationally produced via two-step pyrolysis of iron minerals and biomass waste at 400-850 °C (BCX-Fe-Y, X and Y represented the first- and second-step pyrolysis temperature, respectively). The redox transformation of Cr(VI) and As(III) by Fe-biochar was evaluated in simulated wastewater under oxic or anoxic conditions. Results showed that more effective Cr(VI) reduction could be achieved by BCX-Fe-400, while a higher amount of As (III) was oxidized by BCX-Fe-850 under the anoxic environment. Besides, BCX-Fe-400 could generate more reactive oxygen species (e.g.,^•OH) by reducing the O₂, which enhanced the redox-related transformation of pollutants under the oxic situation. The evolving redox performance of Fe-biochar was governed by the transition of the redox state from reductive to oxidative related to the Fe/C speciation. The small-sized amorphous/low-crystalline ferrous minerals contributed to a higher electron-donating capacity (0.43-1.28 mmol g^-1) of BCX-Fe-400. In contrast, the oxidative surface oxygen-functionalities (i.e., carboxyl and quinoid) on BCX-Fe-850 endowed a stronger electron-accepting capacity (0.71-1.39 mmol g^-1). Moreover, the graphitic crystallites with edge-type defects and porous structure facilitated the electron transfer, leading to a higher electron efficiency of BCX-Fe-850. Overall, we unveiled the roles of both Fe and C speciation in maneuvering the redox reactivity of Fe-biochar, which can advance our rational design of electroactive Fe-biochar for redox-related environmental remediation.

Femtosecond-to-millisecond mid-IR spectroscopy of Photoactive Yellow Protein uncovers structural micro-transitions of the chromophore's protonation mechanism

Protein structural dynamics can span many orders of magnitude in time. Photoactive Yellow Protein's (PYP) reversible photocycle encompasses picosecond isomerization of the light-absorbing chromophore as well as large scale protein backbone motions occurring on a millisecond timescale. Femtosecond-to-millisecond time-resolved mid-Infrared (IR) spectroscopy is employed here to uncover structural details of photocycle intermediates up to chromophore protonation and the first structural changes leading to formation of the partially-unfolded signalling state pB. The data show that a commonly thought stable transient photocycle intermediate is actually formed after a sequence of several smaller structural changes. We provide residue-specific spectroscopic evidence that protonation of the chromophore on a hundreds of microseconds timescale is delayed with respect to deprotonation of the nearby E46 residue. That implies that the direct proton donor is not E46 but most likely a water molecule. Such details may assist ongoing photocycle and protein folding simulation efforts on the complex and wide time-spanning photocycle of the model system PYP.

Helicity control of a perfluorinated carbon chain within a chiral supramolecular cage monitored by VCD

Confinement within supramolecular systems is the leading technology to finely tune guest functional properties. In this communication we report the synthesis of a chiral supramolecular cage able to bias the helicity of a perfluorinated carbon chain hosted within the cage. We monitor the phenomenon of chiral induction by Vibrational Circular Dichroism (VCD) experiments complemented by DFT calculations over the possible conformers.

Effect of Unsaturated Metal Site Modulation in Highly Stable Microporous Materials on CO2 Capture and Fixation

We have designed and synthesized two unprecedented microporous three-dimensional metal-organic frameworks, {[Cd₆(TPOM)₃(L)₆]·12DMF·3H₂O}_n (1) and {[Zn₂(TPOM)(L)₂]·2DMF·H₂O}_n (2), based on a flexible quadritopic ligand, tetrakis(4-pyridyloxymethylene)methane (TPOM), and a bent dicarboxylic acid, 4,4'-(dimethylsilanediyl)bis-benzoic acid (H₂L). The networks of 1 and 2 share a 4-c uninodal net NbO topology but exhibit different metal environments due to coordination preferences of Cd(II) and Zn(II). The Cd(II) center in 1 is six-coordinated, whereas the Zn(II) center in 2 is only four-coordinated, making the latter an unsaturated metal center. Such modulation of coordination atmosphere of metal centers in MOFs with the same topology is possible due to diverse binding of the carboxylate groups of L^2-. Both 1 and 2 have relatively high thermal stability and exhibit permanent porosity after the removal of guest solvent molecules based on variable temperature powder X-ray diffraction and gas adsorption analysis. These materials exhibit similar gas adsorption properties, especially highly selective CO₂ uptake/capture over other gases (N₂ and CH₄). However, because of the presence of an unsaturated Lewis acidic metal site, 2 acts as a very efficient heterogeneous catalyst toward the chemical conversion of CO₂ to cyclic carbonates under mild conditions, whereas 1 shows very less activity. This work provides experimental evidence for the postulate that an unsaturated metal site in MOFs enhances adsoprtion of CO₂ and promotes its conversion via the Lewis-acid catalysis.

Ion Pair Supramolecular Structure Identified by ATR-FTIR Spectroscopy and Simulations in Explicit Solvent*

The present work uses ATR-FTIR spectroscopy assisted by simulations in explicit solvent and frequency calculations to investigate the supramolecular structure of carboxylate alkali-metal ion pairs in aqueous solutions. ATR-FTIR spectra in the 0.25-4.0 M concentration range displayed cation-specific behaviors, which enabled the measurement of the appearance concentration thresholds of contact ion pairs between 1.9 and 2.6 M depending on the cation. Conformational explorations performed using a non-local optimization method associated to a polarizable force-field (AMOEBA), followed by high quantum chemistry level (RI-B97-D3/dhf-TZVPP) optimizations, mode-dependent scaled harmonic frequency calculations and electron density analyses, were used to identify the main supramolecular structures contributing to the experimental spectra. A thorough analysis enables us to reveal the mechanisms responsible for the spectroscopic sensitivity of the carboxylate group and the respective role played by the cation and the water molecules, highlighting the necessity of combining advanced experimental and theoretical techniques to provide a fair and accurate description of ion pairing.

Expansion of Zirconium Oxide Clusters by 3d/4f Ions

Two series of charge-neutral coordination clusters featuring quasi-isostructural metal oxide cores, isolated as [Zr₆Fe₂Ln₂O₈(ib)₁₄(bda)₂(NO₃)₂]·xMeCN (Ln = La (1), Ce (2), Pr (3), and Nd (4); ib^- = isobutyrate; H₂bda = N-butyldiethanolamine) and [Zr₆Fe₂Ln₂O₈(ib)₁₄(mda)₂(NO₃)₂]·xMeCN (Ln = La (5), Ce (6), Pr (7), and Nd (8); H₂mda = N-methyldiethanolamine), were obtained via one-pot reactions of [Fe₃O(ib)₆(H₂O)₃]NO₃ as a critical precursor, Ln(NO₃)₃·6H₂O (Ln = La, Ce, Pr, and Nd), the respective aminoalcohol, and [Zr₆O₄(OH)₄(ib)₁₂(H₂O)]·3Hib in an acetonitrile solution. The coordination clusters in 1-8 feature {Zr₆O₈} cores that are structurally expanded by two 4f (Ln³⁺) and two 3d (Fe³⁺) metal ions, each individually coordinated to one of the eight oxide centers of {Zr₆O₈}, producing a metal skeleton where the 3d/4f positions cap four of the triangular faces of the central Zr₆ octahedron. The coordination clusters differ in the chosen aminoalcohol coligands, N-butyldiethanolamine or N-methyldiethanolamine, which lead to a different isobutyrate coordination pattern in the two series, while the {Fe₂Ln₂Zr₆O₈} core structure remains virtually unaffected. All eight coordination clusters are obtained in moderate to good yields of 29-66% after only several days. Complexes 1-8 are stable against air and moisture; they are also surprisingly thermally stable up to 280 °C in air and in nitrogen atmosphere, and they represent the first reported examples of 3d/4f-functionalized zirconium oxide clusters.

CH Mode Mixing Determines the Band Shape of the Carboxylate Symmetric Stretch in Apo-EDTA, Ca2+-EDTA, and Mg2+-EDTA

The infrared spectra of EDTA complexed with Ca²⁺ and Mg²⁺ contain, to date, unidentified vibrational bands. This study assigns the peaks in the linear and two-dimensional infrared spectra of EDTA, with and without either Ca²⁺ or Mg²⁺ ions. Two-dimensional infrared spectroscopy and DFT calculations reveal that, in both the presence and absence of ions, the carboxylate symmetric stretch and the terminal CH bending vibrations mix. We introduce a method to calculate participation coefficients that quantify the contribution of the carboxylate symmetric stretch, CH wag, CH twist, and CH scissor in the 1400-1550 cm^-1 region. With the help of participation coefficients, we assign the 1400-1430 cm^-1 region to the carboxylate symmetric stretch, which can mix with CH modes. We assign the 1000-1380 cm^-1 region to CH twist modes, the 1380-1430 cm^-1 region to wag modes, and the 1420-1650 cm^-1 region to scissor modes. The difference in binding geometry between the carboxylate-Ca²⁺ and carboxylate-Mg²⁺ complex manifests as new diagonal and cross-peaks between the mixed modes in the two complexes. The small Mg²⁺ ion binds EDTA tighter than the Ca²⁺ ion, which causes a redshift of the COO symmetric stretches of the sagittal carboxylates. Energy decomposition analysis further characterizes the importance of electrostatics and deformation energy in the bound complexes.

Cluster Size Dependent Interaction of Free Manganese Oxide Clusters with Acetic Acid and Methyl Acetate

We have employed infrared multiple-photon dissociation (IR-MPD) spectroscopy together with density functional theory (DFT) calculations to study the interaction of series of subnanometer sized manganese oxide clusters, Mn_xO_y⁺ (x = 1-6, y = 0-9) with acetic acid (HOAc) and methyl acetate (MeOAc). Reaction with HOAc leads to strongly cluster size and composition dependent IR-MPD spectra, indicating molecular adsorption on MnO_x⁺ clusters and thermodynamically favorable but kinetically hampered HOAc dissociation (deprotonation) on Mn₂O₄⁺ and Mn₃O₅⁺. Other cluster sizes exhibit the preferred formation of a dissociative bidentate chelating structure. In contrast to HOAc, all clusters bind MeOAc via the carbonyl group as an intact molecule, and dissociation appears to be kinetically hindered under the given experimental conditions.

Coprecipitation of Fe/Cr Hydroxides with Organics: Roles of Organic Properties in Composition and Stability of the Coprecipitates

Iron hydroxides are important scavengers for dissolved chromium (Cr) via coprecipitation processes; however, the influences of organic matter (OM) on Cr sequestration in Fe/Cr-OM ternary systems and the stability of the coprecipitates are not well understood. Here, Fe/Cr-OM coprecipitation was conducted at pH 3, and Cr hydroxide was undersaturated. Acetic acid (HAc), poly(acrylic acid) (PAA), and Suwannee River natural organic matter (SRNOM) were selected as model OMs, which showed different complexation capabilities with Fe/Cr ions and Fe/Cr hydroxide particles. HAc had no significant effect on the coprecipitation, as the monodentate carboxyl ligand in HAc did not favor complexation with dissolved Fe/Cr ions or Fe/Cr hydroxide nanoparticles. Contrarily, PAA and SRNOM with polydentate carboxyl ligand had strong complexation with Fe/Cr ions and Fe/Cr hydroxide nanoparticles, leading to significant amounts of PAA/SRNOM sequestered in the coprecipitates, which caused the structural disorder and fast aggregation of the coprecipitates. In comparison with that of PAA, preferential complexation of Cr ions with SRNOM resulted in higher Cr/Fe ratios in the coprecipitates. This study advances the fundamental understanding of Fe/Cr-OM coprecipitation and mechanisms controlling the composition and stability of the coprecipitates, which is essential for successful Cr remediation and removal in both natural and engineered settings.

Deciphering supramolecular isomerization in coordination polymers: connected molecular squares vs. fused hexagons

The self-assembly of Mn(ii), bis(tridentate) ligands and bent dicarboxylate linkers under ambient conditions has been exploited to generate a series of 1D coordination polymers in good yields. For a set of seven compounds, structural isomerization of these architectures is demonstrated through the variation of length and nature of the spacer between the tridentate capping sites of the bis(tridentate) ligands, such as tpbn (N,N',N'',N'''-tetrakis-(2-pyridylmethyl)-1,4-diaminobutane), tphxn (N,N',N'',N'''-tetrakis-(2-pyridylmethyl)-1,6-diaminohexane), and tpxn (N,N',N'',N'''-tetrakis-(2-pyridylmethyl)-xylylamine) or by varying the bent dicarboxylate linker 4,4'-(dimethylsilanediyl)bis-benzoic acid (H2L1) or 4,4'-oxybis-benzoic acid (H2L2). These compounds have been structurally characterized by single-crystal and powder X-ray diffraction, FTIR, and thermogravimetric and elemental analyses. This study reveals that the supramolecular structural variation can be precisely controlled either by a judicious selection of reaction conditions or linker/ligand combinations. For example, the self-assembly of Mn(ii), tpbn and H2L1 in DMF/EtOH/water affords a mixture of products (1 and 1a) while changing the solvent combination to EtOH/water results in the generation of a single isomer (1a) in a highly selective manner. On the other hand, for the Mn(ii)-tphxn system, different structural isomers have been isolated by varying the dicarboxylates, H2L1 and H2L2 (2vs.5). Similarly, for the Mn(ii)-H2L2 system, a variation in the spacer chain length of bis(tridentate) ligands, tpbn and tphxn resulted in the formation of different structural isomers (4vs.5).

Analysis of Solid-State Reaction Mechanisms with Two-Dimensional Fourier Transform Infrared Correlation Spectroscopy

The utility of two-dimensional generalized correlation spectroscopy (2D-COS) for tracking complex solid-state reactions is demonstrated using infrared spectra acquired during a photochemically induced decomposition reaction. Eleven different thin films, consisting of six monometallic and five bimetallic 2-ethylhexanoate complexes, were tracked as a function of photolysis time. Overlapping peaks in the infrared fingerprint region are readily discriminated using 2D-COS, enabling individual vibrational components to be used to distinguish whether carboxylate ligands are free/ionic or bound in a chelating, bridging, or monodentate fashion. This classification enables the decomposition mechanism to be tracked for all 11 samples, revealing that ligands bound in monodentate and bridging fashions are first converted to chelates before being lost as volatile products for all samples. The magnitude of the measured first-order rate constants for loss of chelated ligands is found to correlate linearly to the asymmetric stretching frequency of monodentate ligands but exhibits a V shape when plotted against the electronegativity of the metal center. We propose that loss of chelated ligands proceeds via C-O scission for highly electronegative transition metals but M-O scission for transition metals with low electronegativity. These results establish 2D-COS as a powerful tool to deconvolute and correlate individual components, enabling mechanistic analysis of complex chemical reactions.

Salt Engineering of Aripiprazole with Polycarboxylic Acids to Improve Physicochemical Properties

Aripiprazole (APZ) has poor physicochemical properties and bitter taste. The current study aimed to prepare salts of APZ with polycarboxylic acids (citric, malic, and tartaric acids) to improve physicochemical properties and impart sour taste to the drug. The salts were prepared by solubilization-crystallization method, and characterized by electron microscopic, spectroscopic, diffractometry, and thermal methods. The salts were assessed for pH solubility, pH-stability, dissolution, and solid-state stability. Fourier transformed infrared, X-ray powder diffraction, and differential scanning calorimetry data indicated formation of new solid phases. APZ and the salts exhibited pH-dependent solubility. The pH solubility curve shape was inverted "V," inverted "W," and inverted "U" for APZ, APZ-Citrate, and APZ-Malate and APZ-Tartrate, respectively. Compared to APZ, the solubility of salts at pH 4, 5, and 6 was 3.6-7.1, 23.9-31.5, and 143.4-373.3 folds of APZ. Increase in solubility in water by citrate, malate, and tartrate salts was 5562.8, 21,284.7, and 22,846.7 folds of APZ. The salt formation also leads to an increase in rate and extent of dissolution. The dissolution extent was 3.5 ± 0.5, 71.3 ± 1.2, 80.1 ± 6.2, and 86.1 ± 1.1% for APZ, APZ-Citrate, APZ-Malate, and APZ-Tartrate, respectively. Liquid and solid-state stabilities of the salts were comparable to APZ. In conclusion, salts of APZ with polycarboxylic acids improved solubility, and dissolution, and impart sour taste, which may improve palatability of the drug.

Nonanuclear zinc-gold [Zn3Au6] heterobimetallic complexes

Nonanuclear zinc-gold heterobimetallic complexes were synthesized in a two-step process. Commercially available carboxy-functionalized phosphine ligands were used for selective binding to Zn and Au centers. In the first step, bipyridine coordinated Zn-metalloligands with free phosphine moieties were prepared. Reaction of Zn-metalloligands with [AuCl(tht)] (tht = tetrahydrothiophene) resulted in the formation of nonanuclear Zn-Au heterobimetallic complexes. The flexibility of the carboxy-functionalized phosphine ligands was shown to be crucial for the formation of aurophilic interactions. Further, the photoluminescence of the Zn-metalloligands and one Zn-Au complex was investigated at room temperature as well as 77 K. The emission spectra showed clear difference between the Zn-metalloligands and the Zn-Au complex.

Physicochemical Insight into Coordination Systems Obtained from Copper(II) Bromoacetate and 1,10-Phenanthroline

Two different coordination compounds of copper were synthesized from the same building blocks (1,10-phenanthroline, bromoacetate anions, and copper cations). The synthesis parameters were carefully designed and evaluated to allow the change of the resulting compounds molecular structure, i.e., formation of mononuclear (bromoacetato-O,O')(bromoacetato-O)aqua(1,10-phenanthroline-N,N')copper(II) and dinuclear (μ-bromido-1:2κ²)bis(μ-bromoacetato-1κO,2κO')bis(1,10-phenanthroline-N,N')dicopper(II) bromoacetate bromoacetic acid solvate. The crystal, molecular and supramolecular structures of the studied compounds were determined and evaluated in Hirshfeld analysis. The UV-Vis-IR absorption and thermal properties were studied and discussed. For the explicit determination of the influence of compounds structure on radiation absorption in UV-Vis range, density functional theory and time-dependent density functional theory calculations were performed.

Macroscopic Self-Assembly of Gel-Based Microfibers toward Functional Nonwoven Fabrics

Macroscopic self-assembly has increasingly attracted numerous concerns because of the facile fabrication of complex structures and diversified morphologies. Key challenges still remain to design high-performance building blocks to increase the efficiency and diversity of macroscopic self-assembly. Here, we designed triple noncovalent interactions (carboxyl-Zn²⁺ coordination, host-guest interactions, and hydrogen bonding interactions) to enhance the interactions between self-healing fibers, constructing multidimensional nonwoven fiber-based fabrics through macroscopic self-assembly without further postprocessing. Profiled from the strong interactions generated from triple noncovalent interactions, ordered two-dimensional plane and three-dimensional spiral gel fabrics were fabricated using polyvinyl pyrrolidone/gel-based fibers as building blocks toward a human motion sensor. Moreover, we demonstrated that the macroscopic self-assembly strategy is universal to construct three-dimensional film-based fabrics toward wound dressing based on the triple noncovalent interactions between two-dimensional films. This macroscopic self-assembly approach provides an alternative strategy to fabricate gel fabrics for various applications.

Understanding the Effects of Iron Precursor Ligation and Oxidation State Leads to Improved Synthetic Control for Spinel Iron Oxide Nanocrystals

Iron oxide nanocrystals have the potential for use in a wide variety of applications if we can finely control and tune the diverse structural attributes that lead to specific, desired properties. At the high temperatures utilized for thermal decomposition based syntheses, commonly used Fe(III) alkylcarboxylate precursors are inadvertently reduced and produce wüstite (FeO), which is paramagnetic, as opposed to the desired ferrimagnetic spinel phases of magnetite (Fe₃O₄) and maghemite (γ-Fe₂O₃). To circumvent this issue, we carried out syntheses at lower temperatures (∼230 °C) using an esterification-mediated approach. Under these conditions, formation of the FeO phase can be avoided. However, we found that the precursor oxidation state and ligation had a surprisingly strong influence on the morphologies of the resulting nanocrystals. To investigate the cause of these morphological effects, we carried out analogous nanocrystal syntheses with a series of precursors. The use of Fe(III) oleate precursors yielded highly crystalline, largely twin-free nanocrystals; however, small amounts of acetylacetonate ligation yielded nanocrystals with morphologies characteristic of twin defects. During synthesis at 230 °C, the Fe(III) oleate precursor is partially reduced, providing sufficient quantities of Fe(II) that are needed to grow the Fe₃O₄ nanocrystals (wherein one-third of the iron atoms are in the Fe(II) state) without twinning. Our investigations suggest that the acetylacetonate ligands prevent reduction of Fe(III) to Fe(II), leading to twinned structures during synthesis. Harnessing this insight, we identified conditions to predictably and continuously grow octahedral, spinel nanocrystals as well as conditions to synthesize highly twinned nanocrystals. These findings also help explain observations in the thermal decomposition synthesis literature which suggest that iron oxide nanocrystals produced from Fe(acac)₃ are less prone to FeO contamination in comparison to those produced from Fe(III) alkylcarboxylates.

Interactions of water confined in a metal-organic framework as studied by a combined approach of Raman, FTIR, and IR electroabsorption spectroscopies and multivariate curve resolution analysis

Water in nanoconfinement shows distinct properties that are markedly different from those of bulk water. These unique properties stem not only from the water-water interaction but also from the interactions between water and the surrounding confining environment. Here we used a combined approach of vibrational spectroscopies (Raman, FTIR, and IR electroabsorption) and a multivariate curve resolution technique to study the interactions of water in a heterogeneous confining environment within a prototype of pillared layer-type metal-organic frameworks (MOFs), CPL-1 ([Cu2(pzdc)2(pyz)]n, where pzdc = 2,3-pyrazinedicarboxylate, pyz = pyrazine). The OH stretching Raman spectrum of hydrated CPL-1 microcrystals revealed that the adsorbed water molecules resemble the subpopulation of bulk water whose hydrogen bond is weak. Multivariate curve resolution analysis of FTIR spectra monitoring water desorption from CPL-1 allowed for accurate assignments of the framework's carboxylate vibrational modes associated with water-filled and empty nanopores of the MOF, and for quantitative determination of the number fraction of these pores. Furthermore, building on the assignments so made, IR electroabsorption measurements showed that the hydrogen-bonding interaction with water adsorbed in CPL-1 has little impact on the response to electric fields of the framework vibrational modes. The present findings altogether provide a solid basis of elucidating water confined in CPL-1 and demonstrate the potential of the combined vibrational spectroscopic method for interrogating the interactions within MOFs.

Cu-In-S/ZnS@carboxymethylcellulose supramolecular structures: Fluorescent nanoarchitectures for targeted-theranostics of cancer cells

Although the field of oncology nanomedicine has shown indisputable progress in recent years, cancer remains one of the most lethal diseases, where the early diagnosis plays a pivotal role in the patient's prognosis and therapy. Herein, we report for the first time, the synthesis of biocompatible nanostructures composed of Cu-In-S and Cu-In-S/ZnS nanoparticles functionalized with carboxymethylcellulose biopolymer produced by a green aqueous process. These inorganic-organic colloidal nanohybrids developed supramolecular architectures stabilized by chemical functional groups of the polysaccharide shell with the fluorescent semiconductor nanocrystal core, which were extensively characterized by several morphological and spectroscopical techniques. Moreover, these nanoconjugates were covalently bonded with folic acid via amide bonds and electrostatically conjugated with the anticancer drug, producing functionalized supramolecular nanostructures. They demonstrated nanotheranostics properties for bioimaging and drug delivery vectorization effective for killing breast cancer cells in vitro. These hybrids offer a new nanoplatform using fluorescent polysaccharide-drug conjugates for cancer theranostics applications.

Infrared Difference Spectroscopy of Proteins: From Bands to Bonds

Infrared difference spectroscopy probes vibrational changes of proteins upon their perturbation. Compared with other spectroscopic methods, it stands out by its sensitivity to the protonation state, H-bonding, and the conformation of different groups in proteins, including the peptide backbone, amino acid side chains, internal water molecules, or cofactors. In particular, the detection of protonation and H-bonding changes in a time-resolved manner, not easily obtained by other techniques, is one of the most successful applications of IR difference spectroscopy. The present review deals with the use of perturbations designed to specifically change the protein between two (or more) functionally relevant states, a strategy often referred to as reaction-induced IR difference spectroscopy. In the first half of this contribution, I review the technique of reaction-induced IR difference spectroscopy of proteins, with special emphasis given to the preparation of suitable samples and their characterization, strategies for the perturbation of proteins, and methodologies for time-resolved measurements (from nanoseconds to minutes). The second half of this contribution focuses on the spectral interpretation. It starts by reviewing how changes in H-bonding, medium polarity, and vibrational coupling affect vibrational frequencies, intensities, and bandwidths. It is followed by band assignments, a crucial aspect mostly performed with the help of isotopic labeling and site-directed mutagenesis, and complemented by integration and interpretation of the results in the context of the studied protein, an aspect increasingly supported by spectral calculations. Selected examples from the literature, predominately but not exclusively from retinal proteins, are used to illustrate the topics covered in this review.

Elucidating the Drug Release from Metal-Organic Framework Nanocomposites via In Situ Synchrotron Microspectroscopy and Theoretical Modeling

Nanocomposites comprising metal-organic frameworks (MOFs) embedded in a polymeric matrix are promising carriers for drug delivery applications. While understanding the chemical and physical transformations of MOFs during the release of confined drug molecules is challenging, this is central to devising better ways for controlled release of therapeutic agents. Herein, we demonstrate the efficacy of synchrotron microspectroscopy to track the in situ release of 5-fluorouracil (5-FU) anticancer drug molecules from a drug@MOF/polymer composite (5-FU@HKUST-1/polyurethane). Using experimental time-resolved infrared spectra jointly with newly developed density functional theory calculations, we reveal the detailed dynamics of vibrational motions underpinning the dissociation of 5-FU bound to the framework of HKUST-1 upon water exposure. We discover that HKUST-1 creates hydrophilic channels within the hydrophobic polyurethane matrix hence helping to tune drug release rate. The synergy between a hydrophilic MOF with a hydrophobic polymer can be harnessed to engineer a tunable nanocomposite that alleviates the unwanted burst effect commonly encountered in drug delivery.

Tetra- and poly-nuclear Cd(ii) complexes of an N3O4 Schiff base ligand: crystal structures, electrical conductivity and photoswitching properties

A tetranuclear and a polymeric Cd(ii) complex have been synthesized and characterized. The polymeric complex based device behaves as a Schottky barrier diode and exhibits a photoswitching property.

Molecular Vibrations of an Oxygen-Evolving Complex and Its Synthetic Mimic

Bio-inspired catalysis for artificial photosynthesis has been widely studied for decades, in particular, with the purpose of using bio-disposable and non-toxic metals as building blocks. The characterisation of such catalysts has been achieved by using different kinds of spectroscopic methods, from X-ray crystallography to NMR spectroscopy. An artificial Mn₄ CaO₄ cubane cluster with dangling Mn₄ was synthesised in 2015 [Zhang et al. Science 2015, 348, 690-693]; this cluster showed many structural similarities to that of the natural oxygen-evolving complex. An accurate structural and spectroscopic comparison between the natural and artificial systems is highly relevant to understand the catalytic mechanism. Among data from different techniques, the differential FTIR spectra (S_n+1 -S_n ) of photosystem II are still lacking a complete interpretation. The availability of IR data of the artificial cluster offers a unique opportunity to assign absolute absorption spectra on a well-defined and easier to interpret analogous moiety. The present work aims to investigate the novel inorganic compound as a model system for an oxygen-evolving complex through measurement of its spectroscopic properties. The experimental results are compared with calculations by using a variety of theoretical methods (normal mode analysis, effective normal mode analysis) in the S₁ state. We underline the similarities and the differences in the computational spectra based on atomistic models of Mn₄ CaO₅ and Mn₄ CaO₄ complexes.

Structural Insights into Influence of Isomerism on Properties of Open Shell Cobalt Coordination System

The two coordination compounds of cobalt were designed and synthesized. The substrates were carefully selected to allow gentle tuning of the molecular structure of the designed compounds. The crystal, molecular and supramolecular structure of studied compounds has been determined and discussed. The spectroscopic and thermal properties of designed coordination compounds have been studied and their application as precursors for the synthesis of cobalt oxide nanoparticles has been demonstrated. It was proven that not only are parameters of conversion of the precursor to nanoparticles important, but also small changes in molecular structure can considerably affect the size of formed particles. For unambiguous determination of the influence of compounds structure on their UV-Vis radiation absorption, density functional theory and time-dependent density functions theory calculations have been performed. The complexity of the correct ab-initio reflection of the open shell molecular system was outlined and discussed. The results obtained from density functional theory (DFT) calculations have been also employed for discussion of the bonding properties.

Molecular-level origin of the carboxylate head group response to divalent metal ion complexation at the air-water interface

We exploit gas-phase cluster ion techniques to provide insight into the local interactions underlying divalent metal ion-driven changes in the spectra of carboxylic acids at the air-water interface. This information clarifies the experimental findings that the CO stretching bands of long-chain acids appear at very similar energies when the head group is deprotonated by high subphase pH or exposed to relatively high concentrations of Ca2+ metal ions. To this end, we report the evolution of the vibrational spectra of size-selected [Ca2+·RCO2-]+·(H2O) n=0to12 and RCO2-·(H2O) n=0to14 cluster ions toward the features observed at the air-water interface. Surprisingly, not only does stepwise hydration of the RCO2- anion and the [Ca2+·RCO2-]+ contact ion pair yield solvatochromic responses in opposite directions, but in both cases, the responses of the 2 (symmetric and asymmetric stretching) CO bands to hydration are opposite to each other. The result is that both CO bands evolve toward their interfacial asymptotes from opposite directions. Simulations of the [Ca2+·RCO2-]+·(H2O) n clusters indicate that the metal ion remains directly bound to the head group in a contact ion pair motif as the asymmetric CO stretch converges at the interfacial value by n = 12. This establishes that direct metal complexation or deprotonation can account for the interfacial behavior. We discuss these effects in the context of a model that invokes the water network-dependent local electric field along the C-C bond that connects the head group to the hydrocarbon tail as the key microscopic parameter that is correlated with the observed trends.