Enhanced Structural Organization in Covalent Organic Frameworks Through Fluorination

Facial synthesis of fluorine-engineered magnetic covalent organic framework for selective and ultrasensitive determination of fipronil, its metabolites and analogs in food samples

To improve the adsorption affinity and selectivity of fipronils (FPNs), including fipronil, its metabolites and analogs, a magnetic covalent organic framework (Fe3O4@COF-F) with copious fluorine affinity sites was innovatively designed as an adsorbent of magnetic solid-phase extraction (MSPE). The enhanced surface area, pore size, crystallinity of Fe3O4@COF-F and its exponential adsorption capacities (187.3-231.5 mg g-1) towards fipronils were investigated. Combining MSPE with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), an analytical method was established for the selective determination of fipronils in milk and milk powder samples. This method achieved high sensitivity (LODs: 0.004-0.075 ng g-1), satisfactory repeatability and accuracy with spiked recoveries ranging from 89.9% to 100.3% (RSDs≤5.1%). Overall, the constructed Fe3O4@COF-F displayed great potential for the selective enrichment of fipronils, which could be ascribed to fluorine‑fluorine interaction. This method proposed a feasible and promising strategy for the development of functionalized COF and broadened its application in fluorine containing hazards detection.

Interfacial design of pyrene-based covalent organic framework for overall photocatalytic H2O2 synthesis in water

Covalent organic frameworks (COFs) have shown great potential in the photocatalytic production of hydrogen peroxide (H2O2) due to their precisely designed and customized ability. Nevertheless, the quest for efficient overall photosynthesis of H2O2 in pure water without sacrificial agents using COF photocatalysts remains a formidable challenge. Herein, three pyrene-based covalent organic frameworks are synthesized using an advanced interfacial design strategy. By incorporating functional groups of F, H, and OH into a COF skeleton, their wettability and charge-separation properties are fine-tuned. These COFs show great performances as photocatalysts for H2O2 production from water and air by utilizing both the oxygen reduction reaction and water oxidation reaction pathways. Compared to PyCOF-F and PyCOF-H, PyCOF-OH demonstrates superior H2O2 production efficiency due to its improved hydrophilicity and enhanced carrier separation, achieving a remarkable rate of 2961 µmol g-1 h-1 from 25 mL pure water and air. Further, the mechanism of H2O2 production over PyCOF-OH is clarified by combining a series of control experiments, in situ characterizations, and theoretical calculations. This study offers valuable insights into the interfacial design of high-performance photocatalysts for H2O2 synthesis.

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO2 from gas mixtures via O─C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13C-labeled CO2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol-1 between CO2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO2 insertion. The as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO2 in crystalline scaffolds.

Enhancing structural control in covalent organic frameworks through steric interaction-driven linker design

Covalent Organic Frameworks (COFs) exhibiting kagome (kgm) structures are promising crystalline porous materials with two distinct pores. However, there are no reliable synthetic methods to exclusively target the kgm over the polymorphic square-lattice (sql) structure. To address this, we introduce a linker design strategy featuring bulky functional groups, which through steric interactions can hinder the sql net formation, thereby leading to a kgm structure. By rigid attachment of the methyl benzoate groups to a tetradentate COF linker, steric interactions with neighbouring linkers depending on the pore size become possible. The steric interaction was tuned by varying the complementary bidentate linear linker lengths, where the shorter phenylenediamine linker leads to steric hindrance and the formation of the kgm lattice, while with the longer benzidine linker, steric interaction is reduced leading to the sql lattice. Thus, control over the net can be exerted through steric interaction strengths. Additionally, structural analysis revealed the formation of the kgm COF with an unusual ABC stacking, leading to pearl string type pores instead of two distinct pore sizes. This COF system shows that steric interaction-driven design enhances control over COF structures, expanding the design toolbox, but also provides valuable insights into network formation and polymorphism.

Crystalline Polyphenylene Covalent Organic Frameworks

The synthesis of crystalline polyphenylene covalent organic frameworks (COFs) was accomplished by linking fluorinated tris(4-acetylphenyl)benzene building units using aldol cyclotrimerization. The structures of the two COFs, reported here, were confirmed by powder X-ray diffraction techniques, Fourier transform infrared, and solid-state 13C CP/MAS NMR spectroscopy. The results showed that the COFs were porous and chemically stable in corrosive, harsh environments for at least 1 week. Accordingly, postsynthetically modified derivatives of these COFs using primary amines showed CO2 uptake from air and flue gas.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Trifluoromethyl-Functionalized 2D Covalent Organic Framework for High-Resolution Separation of Isomers

Development of novel functional materials for effective isomer separation is of great significance in environmental science, chemical industry, and life science due to the different functions of isomers. However, the similar physicochemical properties of isomers make their separation greatly challenging. Here, we report the fabrication of trifluoromethyl-functionalized 2D covalent organic framework (COF) TpTFMB with 2,2'-bis(trifluoromethyl)benzidine (TFMB) and 1,3,5-triformylphloroglucinol (Tp) for the separation of isomers. TpTFMB was in situ-grown on the inner surface of a capillary for the high-resolution separation of isomers. The introduction of hydroxyl and trifluoromethyl functional groups with uniform distribution in 2D COFs is a powerful tactic to endow TpTFMB with various functions such as hydrogen bonding, dipole interaction, and steric effect. The prepared TpTFMB capillary column enabled the baseline separation of positional isomers such as ethylbenzene and xylene, chlorotoluene, carbon chain isomers such as butylbenzene and ethyl butanoate, and cis-trans isomers 1,3-dichloropropene. The hydrogen-bonding, dipole, and π-π interactions as well as the structure of COF significantly contribute to the isomer separation. This work provides a new strategy for designing functional 2D COFs for the efficient separation of isomers.

Integrated carbon nanotube and triazine-based covalent organic framework composites for high capacitance performance

As a rising class of crystallographic organic polymers, covalent-organic frameworks (COFs) have high specific surface areas, ordered pore structures, and designability, which exhibit broad application prospects in the energy storage sector. However, their low electrical conductivity hinders their potential use in supercapacitors. To improve the electrical conductivity, we introduced carboxylated multi-walled carbon nanotubes to obtain a series of carbon nanotube@COF composites by a facile one-pot method, in which 2D TFA-COFs are in situ grown on the surface of carboxylated multi-walled carbon nanotubes. Among them, the CNT@TFA-COF-3 composite exhibits good crystallinity, regular pores, excellent stability and a specific surface area of 1034 m² g^-1. As expected, as a capacitive electrode material, the CNT@TFA-COF composite shows improved electrochemical performance. Notably, the value of specific capacitance of the CNT@TFA-COF-3 composite (338 F g^-1) is about 8.5, 4.9, and 7.5 times higher than those of TFA-COFs, CNTs, and the CNT/TFA-COF physically mixed complex at a current density of 1.0 A g^-1, respectively. Furthermore, the CNT@TFA-COF-3 supercapacitor exhibits long-term cycle chemical stability and splendid rate capability even after 7000 charge-discharge cycles. The successful preparation of the CNT@TFA-COF-3 composite can provide new ideas for the construction of new COF-based composites and the development of new materials for energy storage.

Fluorine-Containing Covalent Organic Frameworks: Synthesis and Application

Covalent organic frameworks (COFs) are a type of crystalline porous polymers that possess ordered structures and eternal pores. Because of their unique structural characteristics and diverse functional groups, COFs have been used in various application fields, such as adsorption, catalysis, separation, ion conduction, and energy storage. Among COFs, the fluorine-containing COFs (fCOFs) have been developed for special applications by virtue of special physical and chemical properties resulting from fluorine element, which is a nonmetallic halogen element and possesses strong electronegativity. In the organic chemistry field, introducing fluorine into chemicals enables those chemicals to exhibit many interesting properties, and fluorine chemistry increasingly plays an important role in the history of chemical development. The introduction of fluorine in COFs can enhance the crystallinity, porosity, and stability of COFs, making COFs having superior performances and some new applications. In this review, the synthesis and application of fCOFs are systematically summarized. The application involves photocatalytic production of hydrogen peroxide, photocatalytic water splitting, electrocatalytic CO₂ reduction, adsorption for different substances (H₂ , pesticides, per-/polyfluoroalkyl substances, polybrominated diphenyl ethers, bisphenols, and positively charged organic dye molecules), oil-water separation, energy storage (e.g., zinc-ion batteries, lithium-sulfur batteries), and proton conduction. Perspectives of remaining challenges and possible directions for fCOFs are also discussed.

A Crystalline Partially Fluorinated Triazine Covalent Organic Framework for Efficient Photosynthesis of Hydrogen Peroxide

A partially fluorinated, metal-free, imine-linked two-dimensional triazine covalent organic framework (TF₅₀ -COF) photocatalyst was developed. Fluorine (F)-substituted and nonsubstituted units were integrated in equimolar amounts on the edge aromatic units, where they mediated two-electron O₂ photoreduction. F-substitution created an abundance of Lewis acid sites, which regulated the electronic distribution of adjacent carbon atoms and provided highly active sites for O₂ adsorption, and widened the visible-light-responsive range of the catalyst, while enhancing charge separation. Varying the proportion of F maximized the interlayer interactions of TF₅₀ -COF, resulting in improved crystallinity with faster carrier transfer and robust photostability. The TF₅₀ -COF catalyst demonstrates high selectivity and stability in O₂ photoreduction into H₂ O₂ , with a high H₂ O₂ yield rate of 1739 μmol h^-1  g^-1 and a remarkable apparent quantum efficiency of 5.1 % at 400 nm, exceeding the performance of previously reported nonmetal COF-based photocatalysts.

Supramolecular Reinforcement of a Large-Pore 2D Covalent Organic Framework

Two-dimensional covalent organic frameworks (2D-COFs) are a class of crystalline porous organic polymers that consist of covalently linked, two-dimensional sheets that can stack together through noncovalent interactions. Here we report the synthesis of a novel COF, called PyCOFamide, which has an experimentally observed pore size that is greater than 6 nm in diameter. This is among the largest pore size reported to date for a 2D-COF. PyCOFamide exhibits permanent porosity and high crystallinity as evidenced by the nitrogen adsorption, powder X-ray diffraction, and high-resolution transmission electron microscopy. We show that the pore size of PyCOFamide is large enough to accommodate fluorescent proteins such as Superfolder green fluorescent protein and mNeonGreen. This work demonstrates the utility of noncovalent structural reinforcement in 2D-COFs to produce larger and persistent pore sizes than previously possible.

High-Strength, Microporous, Two-Dimensional Polymer Thin Films with Rigid Benzoxazole Linkage

Two-dimensional (2D) rigid polymers provide an opportunity to translate the high-strength, high-modulus mechanical performance of classic rigid-rod 1D polymers across a plane by extending covalent bonding into two dimensions while simultaneously reducing density due to microporosity by structural design. Thus far, this potential has remained elusive because of the challenge of producing high-quality 2D polymer thin films, particularly those with irreversible, rigid benzazole linkages. Here, we present a facile two-step process that allows the deposition of a uniform intermediate film network via reversible, non-covalent interactions, followed by a subsequent solid-state annealing step that facilitates the irreversible conversion to a 2D covalently bonded polymer product with benzoxazole linkages. We demonstrate the versatility of this synthesis method by producing films with four different aromatic core units. The resulting films show microporosity and anisotropy with a 2D layered structure that can be exfoliated into few-layer nanosheets using a freeze-thaw method. These films have promising mechanical properties with an in-plane ultimate tensile strength of nearly 40 MPa and axial tensile and transverse compressive elastic moduli on the scale of several GPa, rivaling the performance of solution-cast films of 1D polybenzoxazole, as well as several other 1D high-strength polymer films.

Design strategies for improving the crystallinity of covalent organic frameworks and conjugated polymers: a review

Highly crystalline covalent organic frameworks (COFs) or conjugated polymers (CPs) are very important and highly desirable because these materials would display better performance in diverse devices and provide more structure-property related information. However, how to achieve highly crystalline or single-crystal COFs and CPs is very challenging. Recently, many research studies have demonstrated the possibility of enhancing the crystallinity of COFs and CPs. Thus, it is timely to offer an overview of the important progress in improving the crystallinity of COFs and CPs from the viewpoint of design strategies. These strategies include polycondensation reaction optimization, improving the planarity, fluorine substitution, side chain engineering, and so on. Furthermore, the challenges and perspectives are also discussed to promote the realization of highly crystalline or single-crystal COFs and CPs.

Presenting porous-organic-polymers as next-generation invigorating materials for nanoreactors

Porous organic polymers (POPs) represent an emerging class of porous organic materials which mainly comprise organic building blocks that are interconnected via strong covalent bonds, thereby offering highly cross-linked frameworks with rigid structures and specific void spaces for accommodating guest molecules. In the past few years, POPs have garnered colossal research interest as nanoreactors for heterogeneous catalysis (thermal, photochemical, electrochemical, etc.) because of their intriguing characteristic features, such as high thermal and chemical stabilities, adjustable chemical functionalities, large surface areas, and tunable pore size distributions. This feature article provides an overview of existing research relating to diverse POP synthetic approaches (COFs, CTFs, and some amorphous POPs), the possible modification of the functionality of POPs, and their exciting application as next-generation nanoreactors. These POPs are extremely interesting, as they offer the potential for either metal-free or metalated polymer catalysts allowing photocatalytic CO₂ reduction to solar-fuel, biofuel upgrades, the conversion of waste cooking oil to bio-oil, and clean H₂ production from water, addressing many scientific and technological challenges and providing new opportunities for various specific topics in catalysis. Finally, we emphasize that the integration of various synthetic approaches and the application of POPs as nanoreactors will provide opportunities in the near future for the precision synthesis of functional materials with significant impact in both basic and applied research areas.

Supramolecular Alloys from Fluorinated Hybrid Tri4 Di6 Imine Cages

To create innovative materials, efficient control and engineering of pore sizes and their characteristics, crystallinity and stability is required. Eight hybrid Tri4 Di6 imine cages with a tunable degree of fluorination and one fully fluorinated Tri4 Di6 imine cage are investigated. Although the fluorinated and the non-fluorinated building blocks used herein differ vastly in reactivity, it was possible to gain control over the outcome of the self-assembly process, by carefully controlling the feed ratio. This represents the first hybrid material based on fluorinated/hydrogenated porous organic cages (POCs). These cages with unlimited miscibility in the solid state were obtained as highly crystalline samples after recrystallization and even showed retention of the crystal lattice, forming alloys. All mixtures and the fully fluorinated Tri4 Di6 imine cage were analyzed by MALDI-MS, single-crystal XRD, powder XRD and in regard to thermal stability (TGA).

Trends in the thermal stability of two-dimensional covalent organic frameworks

Two-dimensional covalent organic frameworks (2D COFs) are synthetically diverse, layered macromolecules. Their covalent lattices are thought to confer high thermal stability, which is typically evaluated with thermogravimetric analysis (TGA). However, TGA measures the temperature at which volatile degradation products are formed and is insensitive to changes of the periodic structure of the COF. Here, we study the thermal stability of ten 2D COFs using a combination of variable-temperature X-ray diffraction, TGA, diffuse reflectance infrared spectroscopy, and density functional theory calculations. We find that 2D COFs undergo a general two-step thermal degradation process. At the first degradation temperature, 2D COFs lose their crystallinity without chemical degradation. Then, at higher temperatures, they chemically degrade into volatile byproducts. Several trends emerge from this exploration of 2D COF stability. Boronate ester-linked COFs are generally more thermally stable than comparable imine-linked COFs. Smaller crystalline lattices are more robust to thermal degradation than chemically similar larger lattices. Finally, pore-functionalized COFs degrade at significantly lower temperatures than their unfunctionalized analogues. These trends offer design criteria for thermally resilient 2D COF materials. These findings will inform and encourage a broader exploration of mechanical deformation in 2D networks, providing a necessary step towards their practical use.

Structural Approaches to Control Interlayer Interactions in 2D Covalent Organic Frameworks

The ability to design and synthesize monomers can affect fundamental aspects in 2D covalent organic frameworks, such as dimensionality, topology, and pore size. Besides this, the structure of the monomers can also affect interlayer interactions, which provide an additional means to influence crystallinity, layer arrangement, interlayer distances, and exfoliability. Herein, some of the effects that the structure of monomers can have on the interlayer interactions in 2D covalent organic frameworks and related materials are illustrated.

Covalent Organic Frameworks: Design, Synthesis, and Functions

Covalent organic frameworks (COFs) are a class of crystalline porous organic polymers with permanent porosity and highly ordered structures. Unlike other polymers, a significant feature of COFs is that they are structurally predesignable, synthetically controllable, and functionally manageable. In principle, the topological design diagram offers geometric guidance for the structural tiling of extended porous polygons, and the polycondensation reactions provide synthetic ways to construct the predesigned primary and high-order structures. Progress over the past decade in the chemistry of these two aspects undoubtedly established the base of the COF field. By virtue of the availability of organic units and the diversity of topologies and linkages, COFs have emerged as a new field of organic materials that offer a powerful molecular platform for complex structural design and tailor-made functional development. Here we target a comprehensive review of the COF field, provide a historic overview of the chemistry of the COF field, survey the advances in the topology design and synthetic reactions, illustrate the structural features and diversities, scrutinize the development and potential of various functions through elucidating structure-function correlations based on interactions with photons, electrons, holes, spins, ions, and molecules, discuss the key fundamental and challenging issues that need to be addressed, and predict the future directions from chemistry, physics, and materials perspectives.

Solving the COF trilemma: towards crystalline, stable and functional covalent organic frameworks

Strategies in covalent organic frameworks and adjacent fields are highlighted for designing stable, ordered and functional materials.

Supramolecular design in 2D covalent organic frameworks

2D covalent organic frameworks (COFs) are a class of porous polymers with crystalline structures. This tutorial review discusses how the concepts of supramolecular chemistry are used to add form and function to COFs through their non-covalent bonds.

Covalent Organic Frameworks: From Materials Design to Biomedical Application

Covalent organic frameworks (COFs) are newly emerged crystalline porous polymers with well-defined skeletons and nanopores mainly consisted of light-weight elements (H, B, C, N and O) linked by dynamic covalent bonds. Compared with conventional materials, COFs possess some unique and attractive features, such as large surface area, pre-designable pore geometry, excellent crystallinity, inherent adaptability and high flexibility in structural and functional design, thus exhibiting great potential for various applications. Especially, their large surface area and tunable porosity and π conjugation with unique photoelectric properties will enable COFs to serve as a promising platform for drug delivery, bioimaging, biosensing and theranostic applications. In this review, we trace the evolution of COFs in terms of linkages and highlight the important issues on synthetic method, structural design, morphological control and functionalization. And then we summarize the recent advances of COFs in the biomedical and pharmaceutical sectors and conclude with a discussion of the challenges and opportunities of COFs for biomedical purposes. Although currently still at its infancy stage, COFs as an innovative source have paved a new way to meet future challenges in human healthcare and disease theranostic.

Synthesis of 2D Imine-Linked Covalent Organic Frameworks through Formal Transimination Reactions

Covalent organic frameworks (COFs) are crystalline, permanently porous, two-dimensional or three-dimensional polymers with tunable topology and functionality. COFs linked with imines or β-ketoenamines are more chemically stable than their boron-linked counterparts, making them more promising for a broad range of applications, including energy storage devices, proton-conductive membranes, and catalyst supports. We report a general and scalable method for synthesizing imine- and β-ketoenamine-linked COFs based on the formal transimination of N-aryl benzophenone imines. These substrates are often the synthetic precursors of traditional polyfunctional aryl amine monomers and are more stable, soluble, and easy to handle and purify. The imine- and β-ketoenamine-linked COFs obtained from this approach show excellent materials quality, as characterized by X-ray diffraction and surface area analysis. The most optimized COF exhibited a Brunauer-Emmett-Teller surface area (>2600 m²/g) very close to its theoretical value (2830 m²/g). This method is amenable to both conventional solvothermal conditions and microwave heating, providing similar or even improved materials quality with shorter reaction times. The high materials quality, scalability, and availability of benzophenone imine monomers are all attractive features of this approach.

Design Principles for Covalent Organic Frameworks in Energy Storage Applications

Covalent organic frameworks (COFs) are an exciting class of porous materials that have been explored as energy-storage materials for more than a decade. This review discusses efforts to develop these materials for applications in gas and electrical power storage. Some of the design strategies for developing the gas sorption properties of COFs and mechanistic studies on their formation are also discussed.

Experimental and theoretical insight into the effect of fluorine substituents on the properties of azine linked covalent organic frameworks

Herein we report a combined experimental and computational study on the effect of fluorine atom incorporation on the materials properties of azine-linked COFs.