Transition-Metal-Controlled Inorganic Ligand-Supported Non-Precious Metal Catalysts for the Aerobic Oxidation of Amines to Imines

Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate-Metal-Organic-Framework Architecture

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson-Evans polyoxometalate clusters (POMs, MMo6O24, M = Rh/Pt) within NU-1000, a Zr-based metal-organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

Green imine synthesis from amines using transition metal and micellar catalysis

Imines are a versatile class of chemicals with applications in pharmaceuticals and as synthetic intermediates. While imines are conventionally synthesized via aldehyde-amine condensation, their direct preparation from amines can avoid the need for the independent preparation of the aldehyde coupling partner and associated constraints with regard to aldehyde storage and purification. The direct preparation of imines from amines typically utilizes transition metal catalysis and is often well-aligned with green chemistry principles. This review provides a comprehensive overview of transition metal catalysed imine synthesis, with a particular focus on the copper-catalyzed oxidative coupling of amines. The emerging application of micellar catalysis for imine synthesis is also surveyed due to its potential to avoid the use of hazardous solvents and intensify these reactions through reduced catalyst loadings and locally increased reactant concentrations. Future directions relating to the confluence of these two areas are proposed towards the more sustainable preparation of imines.

Anderson-type polyoxometalates for catalytic applications

Anderson-type polyoxometalates have exhibited remarkable catalytic capabilities in a wide range of reactions. This discourse delves into the distinct categories of Anderson POMs and their respective catalytic reactions, which are examined in separate segments. These encompass the straightforward {XMo6} POMs, the organic grafting {XMo6} POMs, and the integration of POMs into POM cluster organic frameworks. It is important to highlight that specific catalytic functionalities can solely be accomplished via the utilization of Anderson-type POMs, thus emphasizing their indispensable role in future explorations.

A porous Anderson-type polyoxometalate-based metal-organic framework as a multifunctional platform for selective oxidative coupling with amines

Incorporating catalytic units into a crystalline porous matrix represents a facile way to build high-efficiency heterogeneous catalysts, and by rational design of the porous skeleton with appropriate building blocks the catalytic performance can be significantly enhanced for a series of organic transformations owing to the synergistic effect from the multicomponent and confined porous microenvironment around catalytically active sites. Herein, we demonstrate that the design and synthesis of a porous polyoxometalate-based metal-organic framework YL2(H2O)2[CrMo6O18(PET)2]·4H2O (POMOF-1) constructed from Anderson-type [CrMo6O18(PET)2] (PET = pentaerythritol), which can be employed as a multifunctional platform for synthesis of N-containing compounds via selective oxidative coupling with amines. POMOF-1 features microporous 1D channels defined by Y3+ and L, with [CrMo6O18(PET)2] arranged orderly between adjacent Lvia electrostatic interactions. Upon using POMOF-1 as a catalyst and H2O2 as an oxidant, a variety of amines could be effectively converted to value-added amides, imines and azobenzenes via the oxidative cross-coupling with alcohols or homo-coupling. In particular, POMOF-1 showed dramatically improved activity for the N-formylation reaction owing to the synergistic and confinement effect, with the yield of amides up to 95% and 4 times higher than that of homogeneous [CrMo6O18(PET)2]. Meanwhile, the oxidative homo-coupling of arylmethylamines and arylamines can be facilely tuned by adjustment of the amount of oxidant, solvent and additive, affording imines and azobenzenes in high selectivity and yield, respectively. POMOF-1 is robust and can be reused for 5 cycles with little loss of catalytic activity and structural integrity. The work demonstrates that the combination of catalytically active POMs with crystalline porous MOFs holds great potential to build robust and recyclable heterogeneous systems with enhanced activity and selectivity for multifunctional catalysis.

A benzothiadiazole-based Pt(II) coordination polymer as an efficient heterogeneous photocatalyst for visible-light-driven aerobic oxidative coupling of amines

An emissive Pt(II) coordination polymer (TBP) was synthesized by assembling a benzothiadiazole-based Pt(II) acceptor (A) with a tetraphenylethene (TPE) containing donor (L). Multiple benzothiadiazole units in the polymeric array of the TBP rendered it with reactive oxygen species generation ability. TBP was found to be an excellent photocatalyst for oxidative coupling of benzylamine under visible light with full conversion within 2 hours at room temperature and reusability for multiple cycles. Such photocatalytic efficiency under ambient conditions, reusability of the catalyst, and easy separation of the product are noteworthy.

Mechanistic insights into aerobic oxidative cleavage of glycol catalyzed by an Anderson-type polyoxometalate [IMo6O24]5

A computational investigation of the aerobic oxidative C-C bond cleavage reaction of glycol catalyzed by an Anderson-type heteropolyanion HPA [IMo₆O₂₄]^5- in the presence of acetonitrile as solvent has been performed at the WB97XD/6-31G(d,p)/lanl2dz level. Two reaction pathways have been identified. The catalytic cycle of each pathway consists of three steps: oxidation cleavage of a glycol molecule by the HPA, oxidation of the HPA by one dioxygen molecule, and, finally, oxidation of a second glycol and regeneration of the catalyst. These reaction pathways have been thoroughly investigated in terms of energetic, natural bond orbital (NBO), natural charges, and geometrical parameters. It is found that (i) even though the top oxygen atoms of the Anderson heteropolyanion are not the most negatively charged ones, they are more likely to react with the diol hydroxyl groups, (ii) a direct relationship between the presence of the iodine ion I(VII) and the studied oxidation reaction could not be identified, and (iii) in terms of energy, the transfer of the two hydrogen atoms is the most energetic step.

Recent Advances of Anderson-Type Polyoxometalates as Catalysts Largely for Oxidative Transformations of Organic Molecules

Anderson-type ([XM₆O₂₄]ⁿ⁻) polyoxometalates (POMs) are a class of polymetallic-oxygen cluster inorganic compounds with special structures and properties. They have been paid extensive attention by researchers now, due to their chemical modification and designability, which have been widely applied in the fields of materials, catalysis and medicine. In contemporary years, the application of Anderson-type POMs in catalytic organic oxidation reaction has gradually shown great significance for the research of green catalytic process. In this paper, we investigate the application of Anderson-type POMs in organic synthesis reaction, and these works are summarized according to the different structure of POMs. This will provide a new strategy for further investigation of the catalytic application of Anderson-type POMs and the study of green catalysis.

Enhanced Carrier Separation in Visible-Light-Responsive Polyoxometalate-Based Metal-Organic Frameworks for Highly Efficient Oxidative Coupling of Amines

Photocatalytic technology is widely studied, while it comes with drawbacks such as low sunlight utilization efficiency and high carrier recombination rates. Herein, for the first time, we present two crystalline polyoxometalate (POM)-based metal-organic frameworks (POMOFs), {[Cd(DMF)₂Ru(bpy)₂(dcbpy)]₂(POMs)(DMF)₂} xDMF (PMo-1, POMs = [PMo^VI₁₁Mo^VO₄₀]^4-, x = 5; SiW-2, POMs = [SiW₁₂O₄₀]^4-, x = 4) through assembling the photosensitizer [Ru(bpy)₂(H₂dcbpy)]Cl₂ and POMs into a single framework. The assembly not only enhances light absorption in the visible light regime but also improves carrier separation efficiency; atop of that, both POMOFs demonstrate activities in the photocatalytic oxidative coupling of amines. Particularly, PMo-1 enables the quantitative completion of oxidative coupling of benzylamine reaction within 30 min (yield = 99.6%) with a high turnover frequency (TOF = 6631.6 h^-1). To our knowledge, the PMo-1 catalyst outperforms any other photocatalysts previously reported in similar use cases where TOF values were usually obtained <2000 h^-1.

Insights into organic-inorganic hybrid molecular materials: organoimido functionalized polyoxomolybdates

Polyoxometalates (POMs) are polyatomic anions that comprise transition metal group 5 (V, Nb, Ta) or group 6 (Mo, W) oxyanions connected together by shared oxygen atoms. POMs are fascinating because of their exclusive and remarkable characteristics. One of the most interesting features of POMs is their capability to function as an electron relay by performing stepwise multi-electron redox reactions while maintaining their structural integrity. Functionalization of POMs with amino organic compounds results in organoimido derivatives of polyoxometalates, which have aroused interest due to augmentation of their properties. Comprehensive study has shown that the synthesis methodologies to obtain desired organoimido derivatives of POMs by employing various imido-releasing reagents have progressed drastically in recent decades, particularly the innovative DCC-dehydrating technique. These organoimido functionalized POMs have been used as major building blocks to develop unique nanostructured organic-inorganic hybrid molecular materials. Many conventional organic synthesis processes such as Pd-catalyzed carbon-carbon coupling and esterification reactions have been performed with organoimido functionalized POMs where the presence of POM triggered the reaction process. Thus, investigation of the reactivity of organoimido derivatives of POMs foreshadows the intriguing future of POMs chemistry.

Atom-economic amide synthesis by using an iron-substituted polyoxometalate catalyst

We report an efficient and economical amidation strategy by using a polyoxometalate-based iron catalyst that affords the corresponding amide products in good yields. All of the aliphatic, aromatic and heterocyclic substrates are produced in high yields without additional base or organic ligands. Most importantly, the first example of heterogeneous iron(III)-catalyzed formation of the diamides is developed.

Highly efficient synthesis of diselenides and ditellurides catalyzed by polyoxomolybdate-based copper

A polyoxomolybdate-based copper-catalyzed synthesis of diselenides and ditellurides from organic iodides and elemental selenium or tellurium in moderate to excellent yields is developed.

An efficient chromium(III)-catalyzed aerobic oxidation of methylarenes in water for the green preparation of corresponding acids

A highly efficient method to oxidize methylarenes to their corresponding acids with a reusable Cr catalyst was developed. The reaction can be carried out in water with 1 atm oxygen and K2S2O8 as cooxidants, proceeds under green and mild conditions, and is suitable for the oxidation of both electron-deficient and electron-rich methylarenes, including heteroaryl methylarenes, even at the gram level. The excellent result, together with its simplicity of operation and the ability to continuously reuse the catalyst, makes this new methodology environmentally benign and cost-effective. The generality of this methodology gives it the potential for use on an industrial scale. Differing from the accepted oxidation mechanism of toluene, GC-MS studies and DFT calculations have revealed that the key benzyl alcohol intermediate is formed under the synergetic effect of the chromium and molybdenum in the Cr catalyst, which can be further oxidized to afford benzaldehyde and finally benzoic acid.

A Porphyrin-Based Covalent Organic Framework for Metal-Free Photocatalytic Aerobic Oxidative Coupling of Amines

Imine is an important intermediate in drug synthesis. Photocatalytic aerobic oxidative coupling of amines has been considered as a clean and promising way to produce imine and attracted great attentions. Herein, we designed and synthesized a novel two-dimensional porphyrin-based COF (Por-BC-COF) which adopts an AA stacking mode with excellent crystallinity, high Brunauer-Emmett-Teller surface areas (1200 m 2 g -1 ), wide light absorption range (200-1300 nm) and good stability in a variety of organic solvents. Por-BC-COF can be used as a metal-free heterogeneous photocatalyst for the photocatalytic oxidation of amines to imines under visible light and red light with a high yield (97%). This work presents a novel and efficient COF photocatalyst in the application of light-driven organic synthesis.

Oxidative dehydrogenation of hydrazines and diarylamines using a polyoxomolybdate-based iron catalyst

We report an efficient method for the oxidative dehydrogenation of hydrazines and diarylamines in aqueous ethanol using Anderson-type polyoxomolybdate-based iron(iii) as a catalyst and hydrogen peroxide as an oxidant. A series of azo compounds and tetraarylhydrazines were obtained in moderate to excellent yields. The reaction conditions and substrate scopes are complementary or superior to those of more established protocols. In addition, the catalyst shows good stability and reusability in water. The preliminary mechanistic studies suggest that a radical process is involved in the reaction.

C70 Fullerene Catalyzed Photoinduced Aerobic Oxidation of Benzylamines to Imines and Aldehydes

C₇₀ fullerene catalyzed photoinduced oxidation of benzylic amines at ambient conditions has been explored here. The developed strategy's main feature includes the additive/oxidant-free conversion of benzylic amine to corresponding imine and aldehydes. The reaction manifests broad substrate scope with excellent function group leniency and is applicable up to the gram scale. Further, symmetrical secondary amines can also be synthesized from benzylic amine in a one-pot two-step process. Various experiments and density functional theory studies revealed that the current reaction involves the generation of reactive oxygen species, single electron transfer reaction, and benzyl radical formation as key steps under photocatalytic conditions.

Anderson-type polyoxometalates: from structures to functions

Anderson-type polyoxometalates (POMs) are one of the most important groups of the POM family. In the past decade, the functionalization of Anderson-type POMs has achieved significant progress and these materials have already shown unique charm in catalysis, molecular devices, energy materials, and inorganic biochemical drugs. In particular, their highly flexible topological structure and diverse functionalization methods make them the most convenient and universal platforms for rational design and controllable synthesis. This review provides a deep discussion on the recent progress in the synthetic methodology, structural exploration, and promising applications of Anderson-type POMs. It also summarizes the latest research directions and provides future prospects.

Cyclometalated Half-Sandwich Iridium(III) Complexes: Synthesis, Structure, and Diverse Catalytic Activity in Imine Synthesis Using Air as the Oxidant

Four air-stable cyclometalated half-sandwich iridium complexes 1-4 with C,N-donor Schiff base ligands were prepared through C-H activation in moderate-to-good yields. These complexes have been well characterized, and their exact structure was elaborated on by single-crystal X-ray analysis. The iridium(III) complexes 1-4 showed good catalytic activity in the imine synthesis under open-flask conditions (air as the oxidant) from primary amine oxidative homocoupling, secondary amine dehydrogenation, and the cross-coupling reaction of amine and alcohol. Substituents bonded on the ligands of the iridium complexes displayed little effect on the catalytic efficiency. The stability and good catalytic efficiency of the iridium catalysts, mild reaction conditions, and substrate universality showed their potential application in industrial production.

Selective Oxidation of Anilines to Azobenzenes and Azoxybenzenes by a Molecular Mo Oxide Catalyst

Aromatic azo compounds, which play an important role in pharmaceutical and industrial applications, still face great challenges in synthesis. Herein, we report a molybdenum oxide compound, [N(C₄ H₉ )₄ ]₂ [Mo₆ O₁₉ ] (1), catalyzed selective oxidation of anilines with hydrogen peroxide as green oxidant. The oxidation of anilines can be realized in a fully selectively fashion to afford various symmetric/asymmetric azobenzene and azoxybenzene compounds, respectively, by changing additive and solvent, avoiding the use of stoichiometric metal oxidants. Preliminary mechanistic investigations suggest the intermediacy of highly active reactive and elusive Mo imido complexes.

Microwave-Assisted Synthesis of Tris-Anderson Polyoxometalates for Facile CO2 Cycloaddition

Four new tris-Anderson polyoxometalates (POMs), (NH₄)₄[ZnMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (1), (NH₄)₄[CuMo₆O₁₈(C₄H₈NO₃)(OH)₃]·4H₂O (2), (TBA)₃(NH₄)[ZnMo₆O₁₇(C₅H₉O₃)₂(OH)]·10H₂O (3) (TBA = n-C₁₆H₃₆N), and (NH₄)₄[CuMo₆O₁₈(C₅H₉O₃)₂]·16H₂O (4), were synthesized by a microwave-assisted method. Single-crystal X-ray diffraction revealed that 1 and 2 contained a tris (trihydroxyl organic compounds) ligand grafted on one side, while two tris ligands were grafted on two sides to form χ/δ and δ/δ isomers in 3 and 4, respectively. ¹H and ¹³C NMR spectra of the χ/δ isomer 3 were obtained for the first time, with six methylenes showing six peaks in the ¹H NMR spectrum and only four peaks in the ¹³C NMR spectrum. Mass spectrometry monitoring revealed that during the microwave-assistant process the tris ligand can graft onto POMs to form 1, while tris directly coordinates with metallic heteroatoms to form isopolymolybdates during the conventional reflux synthesis process. In addition, 1-4 can catalyze CO₂ with epoxides into cyclic carbonates with high selectivity and yields at an atmospheric pressure of CO₂, which is lower than the pressure of CO₂ in other catalysis using POMs as catalysts. Furthermore, 1-4 showed good catalytic stability and cycling properties. Mechanism studies substantiated POMs cocatalyzed with Br^- to improve the catalytic yields.

Chromium-catalysed efficient N-formylation of amines with a recyclable polyoxometalate-supported green catalyst

A simple and efficient protocol for the formylation of amines with formic acid, catalyzed by a polyoxometalate-based chromium catalyst, is described. Notably, this method shows excellent activity and chemoselectivity for the formylation of primary amines; diamines have also been successfully employed. Importantly, the chromium catalyst is potentially non-toxic, environmentally benign and safer than the widely used high valence chromium catalysts such as CrO₃ and K₂Cr₂O₇. The catalyst can be recycled several times with a negligible impact on activity. Finally, a plausible mechanism is provided based on the observation of intermediate and control experiments.

Reframing primary alkyl amines as aliphatic building blocks

While primary aliphatic amines are ubiquitous in natural products, they are traditionally considered inert to substitution chemistry. This review highlights historical and recent advances in the field of aliphatic deamination chemistry which demonstrate these moieties can be harnessed as valuable C(sp3) synthons. Cross-coupling and photocatalyzed transformations proceeding through polar and radical mechanisms are compared with oxidative deamination and other transition metal catalyzed reactions.

Additive-Mediated Selective Oxidation of Alcohols to Esters via Synergistic Effect Using Single Cation Cobalt Catalyst Stabilized with Inorganic Ligand

The direct catalytic oxidation of alcohols to esters is very appealing, but the economical-friendly catalysis systems are not yet well established. Herein, we show that a pure inorganic ligand-supported single-atomic cobalt compound, (NH₄)₃[CoMo₆O₁₈(OH)₆] (simplified as CoMo₆), could be used as a heterogeneous catalyst and effectively promote this type of reaction in the presence of 30% H₂O₂ using KCl as an additive. The oxidative cross-esterification of various alcohols (aromatic and aliphatic) could be achieved under mild conditions in nearly all cases, affording the corresponding esters in high yields, including several drug molecules and natural products. Detailed studies have revealed that chloride ion is able to bind to the CoMo₆ to form a supramolecular dimer 2(CoMo₆∙Cl), which can effectively catalyze the reaction via a synergistic effect from chloride ion and CoMo₆. Mechanism studies and control reactions demonstrate that the esterification proceeds via the key oxidative immediate of aldehydes.

Unprecedented Halide-Ion Binding and Catalytic Activity of Nanoscale Anionic Metal Oxide Clusters

One halide ion (X^- ) can bind on the surface of nanoscale Anderson-type polyoxometalate (POMs) clusters [(n-C₄ H₉ )₄ N]₃ {AlMo₆ O₁₈ (OH)₃ [(OCH₂ )₃ CCH₃ ]}, and form stable complexes in solution with binding constant K=1.53×10³ . Single-crystal structural analysis showed that this binding behavior occurs through multiple hydrogen bonding between X^- and three hydroxy groups on the uncapped side of the cluster. This supramolecular interaction in the cluster systems means that their catalytic activities, evaluated from the oxidation of alcohols to aldehydes, can be switched upon the introduction of halide ions and water molecules. The halide ions work as inhibitors by blocking the active sites of the clusters while they can be re-activated by the addition of water.

Discovery of a New Family of Polyoxometalate-Based Hybrids with Improved Catalytic Performances for Selective Sulfoxidation: The Synergy between Classic Heptamolybdate Anions and Complex Cations

A series of functional cation-regulated isopolymolybdate-based organic-inorganic hybrid compounds, Na₂H₂[Mo₄O₁₂(C₈H₁₇O₅N)₂]·10H₂O (1), Na₂[M(Bis-tris)(H₂O)]₂[Mo₇O₂₄]·10H₂O [M = Cu, 2; Ni, 3; Co, 4; Zn, 5; Bis-tris = 2,2-Bis(hydroxymethyl)-2,2',2″-nitrilotriethanol], and (NH₄)₂[M(Bis-tris)(H₂O)]₂[Mo₇O₂₄]·6H₂O (M = Zn, 6; Cu, 7), were synthesized and characterized toward advanced molecular catalyst design. Compound 1 is a covalently bonded adduct, and its self-assembly process can be probed by electrospray ionization mass spectrometry (ESI-MS). Compounds 2-7 are polyoxometalate (POM)-based hybrids containing classic heptamolybdate anions and complex cations with Bis-tris ligands. All of these compounds showed remarkable catalytic effects for selective sulfide oxidation. To the best of our knowledge, compound 5 presents the best catalytic activity so far among the reported hybrid materials with common easily synthesized small-molecule POM clusters and also exhibits outstanding reliability. The conclusion of the catalytic effect is drawn from the results that Zn-based compounds have better catalytic effects than other transition-metal-containing compounds and the compound constructed by Na⁺ has higher catalytic activity than that constructed by NH₄⁺. The mechanism studies show that the improvements of the catalytic performance are caused by the synergy between classic heptamolybdate anions and complex cations. ESI-MS data and UV-vis spectra revealed that the POM anions can form intermediate peroxomolybdenum units during catalytic reaction. Further, the combination of the substrate thioanisole with complex cations was characterized by NMR experiments and UV-vis spectra. Thus, a new synergistic mechanism of anions and cations is proposed in which the activated thioanisole is used as a nucleophile to attack the peroxomolybdenum bonds, and this provides a new strategy in the design of reliable POM-based catalysts.

Highly selective and efficient olefin epoxidation with pure inorganic-ligand supported iron catalysts

Over the past two decades, there have been major developments in the transition iron-catalyzed selective oxidation of alkenes to epoxides; a common structure found in drug, isolated natural products, and fine chemicals. Many of these approaches have enabled highly efficient and selective epoxidation of alkenes via the design of specialized ligands, which facilitates to control the activity and selectivity of the reactions catalyzed by iron atom. Herein, we report the development of the olefin epoxidation with inorganic-ligand supported iron-catalysts using 30% H₂O₂ as an oxidant, and the mechanism is similar to iron-porphyrin type. With the catalyst 1, (NH₄)₃[FeMo₆O₁₈(OH)₆], various aromatic and aliphatic alkenes were successfully transformed into the corresponding epoxides with excellent yields as well as chemo- and stereo-selectivity. This catalytic system possesses the advantages of being able to avoid the use of expensive, toxic, air/moisture sensitive and commercially unavailable organic ligands. The generality of this methodology is simple to operate and exhibits high catalytic activity as well as excellent stability, which gives it the potential to be used on an industrial scale, and maybe opens a way for the catalytic oxidation reaction via inorganic-ligand coordinated iron catalysis.

Copper-Catalyzed Oxidative Multicomponent Annulation Reaction for Direct Synthesis of Quinazolinones via an Imine-Protection Strategy

Via an imine-protection strategy, we herein present an unprecedented copper-catalyzed oxidative multicomponent annulation reaction for direct synthesis of quinazolinones. The construction of various products is achieved via formation of three C-N and one C-C bonds in conjunction with the benzylic functionalization. The merits of easily available feedstocks, naturally abundant catalyst, good functional group and substrate compatibility, and release of H₂O as the byproduct make the developed chemistry a practical way to access quinazolinones.

Iron-catalyzed oxidative functionalization of C(sp3)–H bonds under bromide-synergized mild conditions

A bromide-synergized iron catalysis which can effectively catalyze the oxidative functionalization of various C–H bonds with high yield and good selectivity.

Recent advances of polyoxometalate-catalyzed selective oxidation based on structural classification

The structural diversity and tenability observed in POMs has encouraged extensive investigations into their catalytic activity. Based on the structural classification of POMs, this review summarizes recent advances relating to POM-catalyzed selective oxidation and places most emphasis on dynamic developments from 2015 onwards. Work which contributes to comparing the catalytic performance of POMs with delicate structural differences (e.g. the same type of POM structure with differences of the heteroatom, addenda, protonated state or counter-ion) and in elucidating the origin/distinction of catalytic activity, as well as reasonable mechanisms, are especially highlighted.

Selective aerobic oxidation of halides and amines with an inorganic-ligand supported zinc catalyst

A practical, efficient and environmentally benign catalytic protocol for the oxidative cross-coupling reaction of halides with amines, oxidative self-coupling of amines and oxidation of halides was developed with inorganic-ligand supported ZnPOM (NH4)4[ZnMo6O18(OH)6] using molecular oxygen. This method mainly utilizes an inorganic polymolybdate ligand to support the Zn2+ ion, avoiding the use of complicated organic ligands.

Highly practical and efficient preparation of aldehydes and ketones from aerobic oxidation of alcohols with an inorganic-ligand supported iodine catalyst

Herein, we divulge an efficient protocol for aerobic oxidation of alcohols with an inorganic-ligand supported iodine catalyst, (NH4)5[IMo6O24]. The catalyst system is compatible with a wide range of groups and exhibits high selectivity, and shows excellent stability and reusability, thus serving as a potentially greener alternative to the classical transformations.

Direct α-C-H amination using various amino agents by selective oxidative copper catalysis: a divergent access to functional quinolines

Herein, we present, for the first time, direct dehydrogenative α-C-H amination of tetrahydroquinolines (THQs) using various amino agents by selective aerobic copper catalysis, which enables divergent access to 2-aminoquinolines, the core structures of numerous functional products. In which, the catalyst system preferentially oxidizes the tetrahydroquinolines between two amino reactants, and the presence of TEMPO significantly enhances the capability of the first oxidation of THQs and makes it a kinetically controlled process, thus favoring the C-N bond-forming step. The developed chemistry features broad substrates, excellent functional tolerance, high chemo-selectivity, and no need for pre-preparation of specific aminating agents, which offers a practical way for diverse and atom-economic synthesis of 2-aminoquinolines that are difficult to prepare or inaccessible with the existing C-H amination approaches.

A Computational Mechanistic Investigation into Reduction of Gold(III) Complexes by Amino Acid Glycine: A New Variant for Amine Oxidation

Density functional theory (DFT) was utilized to explore the reduction of gold(III) complexes by the amino acid glycine (Gly). Interestingly, when the nitrogen atom of Gly coordinates to the gold(III) center, its C^α -hydrogen atom becomes so acidic that it can be easily deprotonated by a mild base like water. The deprotonation converts the amino acid into a potent reductant by which gold(III) is reduced to gold(I) with a moderate activation energy. To our knowledge, this is the first contribution suggesting that primary amines are oxidized to imines via direct α-carbon deprotonation. This finding may provide new insights into the mechanistic interpretation of amine oxidations catalyzed/mediated by a center with high cathodic reduction potential. This work also provides a rationalization behind why gold(III) complexes with amine-based polydentate ligands are reluctant to undergo a redox process. Gold(III) reduction occurs most efficiently if the C^α proton leaves in the plane of the C^α , N and Au atoms. Chelation prevents this alignment, resulting in the gold(III) complex being unreactive toward reduction. It has been experimentally found that gold(III) is capable of oxidizing Gly to glyoxylic acid (GA) as the initial product. The latter, in the presence of another gold(III) complex, has been reported to undergo oxidative decarboxylation to afford CO₂ and HCOOH. This process is found to be mediated by formation of a geminal diol intermediate produced by reaction of water with the aldehyde functional group of the coordinated GA.

Sodium periodate/TEMPO as a selective and efficient system for amine oxidation

A new metal-free protocol for promoting oxidation of amines in aqueous-organic medium was developed. NaIO₄ and TEMPO as the catalyst emerged as the most efficient and selective system for oxidation of differently substituted benzyl amines to the corresponding benzaldehydes without overoxidation. Unsymmetrical secondary amines underwent selective oxidation only at the benzylic position thus realising an oxidative deprotection of a benzylic group with an easy amine recovery.

NaIO₄/TEMPO efficiently allowed a metal-free oxidation of benzylamines to benzaldehydes with complete selectivity for N-benzyl residues in secondary amines.