Dithiocarboxylic Acids: An Old Theme Revisited and Augmented by New Preparative, Spectroscopic and Structural Facts

Structural evolution during inverse vulcanization

Inverse vulcanization exploits S8 to synthesize polysulfides. However, evolution of products and its mechanism during inverse vulcanization remains elusive. Herein, inverse vulcanization curves are obtained to describe the inverse vulcanization process in terms of three stages: induction, curing and over-cure. The typical curves exhibit a moduli increment before declining or plateauing, reflecting the process of polysulfide network formation and loosing depending on monomers. For aromatic alkenes, in the over-cure, the crosslinked polysulfide evolves significantly into a sparse network with accelerated relaxation, due to the degradation of alkenyl moieties into thiocarbonyls. The inverse vulcanization product of olefins degrades slowly with fluctuated relaxation time and modulus because of the generation of thiophene moieties, while the inverse vulcanization curve of dicyclopentadiene has a plateau following curing stage. Confirmed by calculations, the mechanisms reveal the alkenyl groups react spontaneously into thiocarbonyls or thiophenes via similar sulfur-substituted alkenyl intermediates but with different energy barriers.

DFT and TDDFT exploration on electronic transitions and bonding aspect of DPA and PTDC ligated transition metal complexes

CONTEXT

In this study, we have investigated the structure, reactivity, bonding, and electronic transitions of DPA and PDTC along with their Ni-Zn complexes using DFT/TD-DFT methods. The energy gap between the frontier orbitals was computed to understand the reactivity pattern of the ligands and metal complexes. From the energies of FMO's, the global reactivity descriptors such as electron affinity, ionization potential, hardness (η), softness (S), chemical potential (μ), electronegativity (χ), and electrophilicity index (ω) have been calculated. The complexes show a strong NLO properties due to easily polarization as indicated by the narrow HOMO-LUMO gap. The polarizability and hyperpolarizabilities of the complexes indicate that they are good candidates for NLO materials. Molecular electrostatic potential (MEP) maps identified electrophilic and nucleophilic sites on the surfaces of the complexes. TDDFT and NBO analyses provided insights into electronic transitions, bonding, and stabilizing interactions within the studied complexes. DPA and PDTC exhibited larger HOMO-LUMO gaps and more negative electrostatic potentials compared to their metal complexes suggesting the higher reactivity. Ligands (DPA and PDTC) had absorption spectra in the range of 250 nm to 285 nm while their complexes spanned 250 nm to 870 nm. These bands offer valuable information on electronic transitions, charge transfer and optical behavior. This work enhances our understanding of the electronic structure and optical properties of these complexes.

METHODS

Gaussian16 program was used for the optimization of all the compounds. B3LYP functional in combination with basis sets, such as LanL2DZ for Zn, Ni and Cu while 6-311G** for other atoms like C, H, O, N, and S was used. Natural bond orbital (NBO) analysis is carried out to find out how the filled orbital of one sub-system interacts with the empty orbital of another sub-system. The ORCA software is used for computing spectral features along with the zeroth order regular approximation method (ZORA) to observe its relativistic effects. TD-DFT study is carried out to calculate the excitation energy by using B3LYP functional.

Metal-Tuned Ligand Reactivity Enables CX2 (X = O, S) Homocoupling with Spectator Cu Centers

Ligand non-innocence is ubiquitous in catalysis with ligands in synthetic complexes contributing as electron reservoirs or co-sites for substrate activation. The latter chemical non-innocence is manifested in H+ storage or relay at sites beyond the metal primary coordination sphere. Reaction of a competent CO2-to-oxalate reduction catalyst, namely, [K(THF)3](Cu3SL), where L3- is a tris(β-diketiminate) cyclophane, with CS2 affords tetrathiooxalate at long reaction times or at high CS2 concentrations, where otherwise an equilibrium is established between the starting species and a complex-CS2 adduct in which the CS2 is bound to the C atom on the ligand backbone. X-ray diffraction analysis of this adduct reveals no apparent metal participation, suggesting an entirely ligand-based reaction controlled by the charge state of the cluster. Thermodynamic parameters for the formation of the aforementioned Cligand-CS2 bond were experimentally determined, and trends with cation Lewis acidity were studied, where more acidic cations shift the equilibrium toward the adduct. Relevance of such an adduct in the reduction of CO2 to oxalate by this complex is supported by DFT studies, similar effects of countercation Lewis acidity on product formation, and the homocoupled heterocumulene product speciation as determined by isotopic labeling studies. Taken together, this system extends chemical non-innocence beyond H+ to effect catalytic transformations involving C-C bond formation and represents the rarest example of metal-ligand cooperativity, that is, spectator metal ion(s) and the ligand as the reaction center.

New Protocol for the Synthesis of S-Thioesters from Benzylic, Allylic and Tertiary Alcohols with Thioacetic Acid

A new one-pot solvent-less reaction to convert benzylic, allylic, ferrocenyl or tertiary alcohols into S-thioesters, bench-stable and less odorous precursors of the corresponding thiols, which is based on reactions in neat thioacetic acid in the presence of tetrafluoroboric acid, is presented. Reaction monitoring by NMR and GC of the benzyl alcohol conversion indicated the intermediate formation of benzyl acetate and benzyl thionoacetate (PhCH2 OC(S)CH3 ) prior to the slower conversion to the final S-benzyl thioacetate product. Increasing the HBF4 concentration enhanced the reaction rate, giving good to excellent yield (up to 99 %) for a large scope of alcohols. Control experiments, with support of DFT calculations, have revealed a thermodynamically favorable, though requiring HBF4 -activation, disproportionation of CH3 C(O)SH to CH3 C(O)OH and CH3 C(S)SH, the latter immediately decomposing to H2 S and (MeC)4 S6 but also generating the hitherto unreported [MeC(O)C(Me)S]2 (μ-S)2 . Kinetic investigations demonstrated that the rate of benzyl alcohol conversion is second-order in [PhCH2 OH] and second order in [HBF4 ], while the rate of conversion of the benzyl acetate intermediate to S-benzyl thioacetate is second order in [PhCOOMe] and fourth order in [HBF4 ]. The DFT calculations rationalize the need to two alcohol molecules and two protons to generate the reactive benzyl cation.

Synthesis and Reactivity of Fluorinated Dithiocarboxylates to Prepare Thioamides-Effective Access to a 4-Styrenylthioamide-Cinchona Alkaloid Monomer

A simple and rapid access to fluorinated dithioesters was developed by a one-pot sequence corresponding to a Grignard reaction-Mitsunobu type substitution. These activated dithioesters have shown excellent reactivity in an aminolysis reaction from simple or more complex primary amines such as cinchona alkaloids. A stoichiometric amount of amine was sufficient to prepare various thioamides, including a 4-styrenylthioamide cinchonidine monomer, under environmentally friendly conditions, at room temperature, and in a very short time.

Matched Ligands for Small, Stable Colloidal Nanoparticles of Copper, Cuprous Oxide and Cuprous Sulfide

This work applies organometallic routes to copper(0/I) nanoparticles and describes how to match ligand chemistries with different material compositions. The syntheses involve reacting an organo-copper precursor, mesitylcopper(I) [CuMes]z (z=4, 5), at low temperatures and in organic solvents, with hydrogen, air or hydrogen sulfide to deliver Cu, Cu2 O or Cu2 S nanoparticles. Use of sub-stoichiometric quantities of protonated ligand (pro-ligand; 0.1-0.2 equivalents vs. [CuMes]z ) allows saturation of surface coordination sites but avoids excess pro-ligand contaminating the nanoparticle solutions. The pro-ligands are nonanoic acid (HO2 CR1 ), 2-[2-(2-methoxyethoxy)ethoxy]acetic acid (HO2 CR2 ) or di(thio)nonanoic acid, (HS2 CR1 ), and are matched to the metallic, oxide or sulfide nanoparticles. Ligand exchange reactions reveal that copper(0) nanoparticles may be coordinated by carboxylate or di(thio)carboxylate ligands, but Cu2 O is preferentially coordinated by carboxylate ligands and Cu2 S by di(thio)carboxylate ligands. This work highlights the opportunities for organometallic routes to well-defined nanoparticles and the need for appropriate ligand selection.

Molybdenum(IV) dithiocarboxylates as single-source precursors for AACVD of MoS2 thin films

Tetrakis(dithiocarboxylato)molybdenum(IV) complexes of the type Mo(S2CR)4 (R = Me, Et, iPr, Ph) were synthesized, characterized, and prescreened as precursors for aerosol assisted chemical vapor deposition (AACVD) of MoS2 thin films. The thermal behavior of the complexes as determined by TGA and GC-MS was appropriate for AACVD, although the complexes were not sufficiently volatile for conventional CVD bubbler systems. Thin films of MoS2 were grown by AACVD at 500 °C from solutions of Mo(S2CMe)4 in toluene. The films were characterized by GIXRD diffraction patterns which correspond to a 2H-MoS2 structure in the deposited film. Mo-S bonding in 2H-MoS2 was further confirmed by XPS and EDS. The film morphology, vertically oriented structure, and thickness (2.54 μm) were evaluated by FE-SEM. The Raman E12g and A1g vibrational modes of crystalline 2H-MoS2 were observed. These results demonstrate the use of dithiocarboxylato ligands for the chemical vapor deposition of metal sulfides.

Substituent effects on the UV-visible spectrum and excited electronic states of dithiocarboxylates

The absorption spectra of a series of dithiocarboxylates were investigated in the ultraviolet-visible region. Two questions that this study aimed to address were as follows: (1) What transitions give rise to the features in the electronic spectra? And (2) what are the long- and short-range substituent effects on the absorption spectra? A series of 11 dithiocarboxylates were prepared as organic soluble salts. Time-dependent density functional theory (TDDFT) was used to calculate excited state energies and oscillator strengths of electronic transitions. TDDFT at the CAM-B3LYP/def2-TZVPD level of theory predicts two low-energy n → π* transitions and two π → π* transitions at higher energy, consistent with the experimental spectra. This state ordering and density is in contrast to the better studied thiocarbonyls for which only two transitions within the singlet manifold appear in the UV-visible region. For derivatives of dithiobenzoate, the energy of the three lowest energy states are insensitive to changes to substituents para to the dithiocarboxylate group. In contrast, the energy of the highest ππ* state varies by 0.78 eV. This work shows that the results of TDDFT calculations can be used to predict the electronic absorption spectra of dithiocarboxylates, providing a useful tool for designing dithiocarboxylate light absorbers.

Electroreductive synthesis of polyfunctionalized pyridin-2-ones from acetoacetanilides and carbon disulfide with oxygen evolution

A chemical reductant or a sacrificial electron donor is required in any reduction reactions, generally resulting in undesired chemical waste. Herein, we report a reductant-free reductive [3 + 2 + 1] annulation of β-keto amides with CS₂ enabled by the synergy of electro/copper/base using water as an innocuous anodic sacrifice with O₂ as a sustainable by-product. This electrochemical protocol is mild and provides access to polyfunctionalized pyridin-2-ones from simple starting materials in a single step.

Technetium(I) Carbonyl Chemistry with Small Inorganic Ligands

[Tc(OH₂)(CO)₃(PPh₃)₂](BF₄) has been used as a synthon for reactions with small inorganic ligands with relevance for the treatment of nuclear waste solutions such as nitrate, nitrite, pseudohalides, permetalates (M = Mn, Tc, Re), and BH₄^-. The formation of bond isomers and/or a distinct reactivity has been observed for most of the products. [Tc(NCO)(CO)₃(PPh₃)₂], [Tc(NCS)(CO)₃(PPh₃)₂], [Tc(CN)(CO)₃(PPh₃)₂], [Tc(N₃)(CO)₃(PPh₃)₂], [Tc(NCO)(OH₂)(CO)₂(PPh₃)₂], [Tc(η²-OON)(CO)₂(PPh₃)₂], [Tc(η¹-NO₂)(CO)₃(PPh₃)₂], [Tc(η²-OONO)(CO)₂(PPh₃)₂], [Tc(η¹-ONO₂)(CO)₃(PPh₃)₂], [Tc(η²-OO(CCH₃))(CO)₂(PPh₃)₂], [Tc(η²-SSC(SCH₃))(CO)₂(PPh₃)₂], [Tc(η²-SSC(OCH₃))(CO)₂(PPh₃)₂], [Tc(η²-SSC(CH₃))(CO)₂(PPh₃)₂], [Tc(η²-SS(CH))(CO)₂(PPh₃)₂], [Tc(OTcO₃)(acetone)(CO)₂(PPh₃)₂], [Tc(OTcO₃)(CO)₃(PPh₃)₂], and [Tc(η²-HHBH₂)(CO)₂(PPh₃)₂] have been isolated in crystalline form and studied by X-ray crystallography. Additionally, the typical reactivity patterns (isomerization, thermal decomposition, hydrolysis, or decarbonylation) of the products have been studied by spectroscopic methods. ⁹⁹Tc NMR spectroscopy has proved to be a particularly useful tool for the evaluation of such reactions of the diamagnetic technetium(I) compounds in solution.

Introducing Benzene-1,3,5-tri(dithiocarboxylate) as a Multidentate Linker in Coordination Chemistry

Benzene-1,3,5-tri(dithiocarboxylate) (BTDTC^3-), the sulfur-donor analogue of trimesate (BTC^3-, benzene-1,3,5-tricarboxylate), is introduced, and its potential as a multidentate, electronically bridging ligand in coordination chemistry is evaluated. For this, the sodium salt Na₃BTDTC has been synthesized, characterized, and compared with the sodium salt of the related ditopic benzene-1,4-di(dithiocarboxylate) (Na₂BDDTC). Single-crystal X-ray diffraction of the respective tetrahydrofuran (THF) solvates reveals that such multitopic aromatic dithiocarboxylate linkers can form both discrete metal complexes (Na₃BTDTC·9THF) and (two-dimensional) coordination polymers (Na₂BDDTC·4THF). Additionally, the versatile coordination behavior of the novel BTDTC^3- ligand is demonstrated by successful synthesis and characterization of trinuclear Cu(I) and hexanuclear Mo(II)₂ paddlewheel complexes. The electronic structure and molecular orbitals of both dithiocarboxylate ligands as well as their carboxylate counterparts are investigated by density functional theory computational methods. Electrochemical investigations suggest that BTDTC^3- enables electronic communication between the coordinated metal ions, rendering it a promising tritopic linker for functional coordination polymers.

One-dimensional electronic systems: metal-chain complexes and organic conductors

One-dimensional (1D) metal-chain complexes and organic conductors show many similarities as well as striking differences in structural and electronic properties, although constituent elements and orbitals that contribute to charge transfer in these systems are quite different. In this review, we highlighted the structural and electronic properties of neutral MMX-chain complexes (M = Pt2+/3+, X = I-) and tetramethyltetrathiafulvalene-based cation radical salts as typical examples of each group while comparing them with each other. This review primarily aims to construct a coherent body of knowledge of 1D electronic materials that might have been separately investigated. We have proposed future directions for the exploration of new and more advanced electronic materials not only having 1D character, but also residing in the dimensional crossover regime.

Heavy chalcogenide-transition metal clusters as coordination polymer nodes

While metal-oxygen clusters are widely used as secondary building units in the construction of coordination polymers or metal-organic frameworks, multimetallic nodes with heavier chalcogenide atoms (S, Se, and Te) are comparatively untapped. The lower electronegativity of heavy chalcogenides means that transition metal clusters of these elements generally exhibit enhanced coupling, delocalization, and redox-flexibility. Leveraging these features in coordination polymers provides these materials with extraordinary properties in catalysis, conductivity, magnetism, and photoactivity. In this perspective, we summarize common transition metal heavy chalcogenide building blocks including polynuclear metal nodes with organothiolate/selenolate or anionic heavy chalcogenide atoms. Based on recent discoveries, we also outline potential challenges and opportunities for applications in this field.

Diversity of aggregation motifs in gold(i) dithiocarboxylate complexes

Molecular structures and aggregation motifs of different substituted gold(i) dithiocarboxylate complexes are presented and a correlation between the substituent and the aggregation motif is discussed.

Insertion of CS2into the Mg–H bond: synthesis and structural characterization of the magnesium dithioformate complex, [TismPriBenz]Mg(κ2-S2CH)

Insertion of CS₂into the Mg–H bond of [Tism^PriBenz]MgH affords [Tism^PriBenz]Mg(κ²-S₂CH), the first structurally characterized magnesium dithioformate compound.

Silver(i) dithiocarboxylate complexes – clustering and aggregation

Molecular structures and aggregation motifs of a series of neutral homoleptic silver(i) dithiocarboxylate are presented and a correlation between the substituent and aggregation motif as well as the differences from the (almost) analogous gold(i) complexes are discussed.