Recent Trends in Metallopolymer Design: Redox-Controlled Surfaces, Porous Membranes, and Switchable Optical Materials Using Ferrocene-Containing Polymers

Redox active metallene anchored amino-functionalized cellulose composite for electrochemical capture and conversion of chromium

Considering the ubiquity and high toxicity of Cr(VI) species for destroying a sustainable environment, developing energy-efficient method for capturing and detoxifying chromium [Cr(VI) → Cr(III)] is imperative. Herein, ferrocene (Fc) was combined with carboxymethyl cellulose (CMC) and polyethyleneimine (PEI) for Cr(VI) remediation. Fc species possessed reversible redox behavior and low ionization potential, yet it faced challenges with conductivity and stability. Results revealed that, PEI facilitated the binding of Fc within the CMC through electrostatic interactions or coordination bonds, ensuring the good dispersion and stability of Fc. When applied in the electrochemical adsorption of Cr(VI), the combination created a synergistic effect. The presence of Fc and PEI boosted the electrochemical performance by providing faster electronic and ionic transportation, higher specific capacitance coupled with improved electrode-electrolyte interactions, leading to a higher Cr(VI) adsorption capacity over CMC/PEI/Fc (280.5 mg/g) compared to those over CMC and CMC/PEI. The interactions between the Cr(VI) and electrode included the electrosorption, electrostatic interaction of protonated PEI and oxidized Fc species. When the electric field was reversed, the Cr(VI) was electrostatic repulsed and electrocatalytic reduced to Cr(III) with a reduction rate of 85.4 %. This work promoted the development of effective electrosorption materials suitable for complete Cr(VI) removal and detoxification.

Integrating redox-electrodialysis and electrosorption for the removal of ultra-short- to long-chain PFAS

A major challenge in per- and polyfluoroalkyl substances (PFAS) remediation has been their structural and chemical diversity, ranging from ultra-short to long-chain compounds, which amplifies the operational complexity of water treatment and purification. Here, we present an electrochemical strategy to remove PFAS from ultra-short to long-chain PFAS within a single process. A redox-polymer electrodialysis (redox-polymer ED) system leverages a water-soluble redox polymer with inexpensive nanofiltration membranes, facilitating the treatment of varied chain lengths of PFAS without membrane fouling. Our approach combines both ion migration by electrodialysis (for PFAS with chain lengths ≤C4) and electrosorption strategies (for PFAS with chain lengths ≥C6) to eliminate approximately 90% of ultra-short-, short-chain, and long-chain PFAS. At the same time, we achieve continuous desalination of the source water down to potable water level. The redox-polymer ED exhibits remarkable PFAS removal in real source water scenarios, including from matrices with 10,000 times higher salt concentrations, as well as secondary effluents from wastewaters. Additionally, the removed PFAS is mineralized with a defluorination performance between 76-100% by electrochemical oxidation, highlighting the viability of integrating the separation step with a reactive degradation process.

Ferrocene-Modified Polyacrylonitrile-Containing Block Copolymers as Preceramic Materials

In the pursuit of fabricating functional ceramic nanostructures, the design of preceramic functional polymers has garnered significant interest. With their easily adaptable chemical composition, molecular structure, and processing versatility, these polymers hold immense potential in this field. Our study succeeded in focusing on synthesizing ferrocene-containing block copolymers (BCPs) based on polyacrylonitrile (PAN). The synthesis is accomplished via different poly(acrylonitrile-block-methacrylate)s via atom transfer radical polymerization (ATRP) and activators regenerated by electron transfer ATRP (ARGET ATRP) for the PAN macroinitiators. The molecular weights of the BCPs range from 44 to 82 kDa with dispersities between 1.19 and 1.5 as determined by SEC measurements. The volume fraction of the PMMA block ranges from 0.16 to 0.75 as determined by NMR. The post-modification of the BCPs using 3-ferrocenyl propylamine has led to the creation of redox-responsive preceramic polymers. The thermal stabilization of the polymer film has resulted in stabilized morphologies based on the oxidative PAN chemistry. The final pyrolysis of the sacrificial block segment and conversion of the metallopolymer has led to the formation of a porous carbon network with an iron oxide functionalized surface, investigated by scanning electron microscopy (SEM), energy dispersive X-ray mapping (EDX), and powder X-ray diffraction (PXRD). These findings could have significant implications in various applications, demonstrating the practical value of our research in convenient ceramic material design.

A Type of Ferrocene-Based Derivative FE-1 COF Material for Glycopeptide and Phosphopeptide Selective Enrichment

In this work, a new type of FE-1 COF material is prepared by a reversible imine condensation reaction with diaminoferrocene and diaminodiformaldehyde as materials. The material is connected by imine bonds to form a COF skeleton, and the presence of plenty of nitrogen-containing groups gives the material good hydrophilicity; the presence of metal Fe ions provides the material application potential in the enrichment of phosphopeptides. According to the different binding abilities of N-glycopeptide and phosphopeptide on FE-1 COF, it can simultaneously enrich N-glycopeptide and phosphopeptide through different elution conditions to realize its controllable and selective enrichment. Using the above characteristics, 18 phosphopeptides were detected from α-casein hydrolysate, 8 phosphopeptides were detected from β-casein hydrolysate and 21 glycopeptides were detected from IgG hydrolysate. Finally, the gradual elution strategy was used; 16 phosphopeptides and 19 glycopeptides were detected from the α-casein hydrolysate and IgG hydrolysate. The corresponding glycopeptides and phosphopeptides were identified from the human serum. It proves that the FE-1 COF material has a good enrichment effect on phosphopeptides and glycopeptides.

Stimuli-Responsive Properties of a Zinc(II) Salen-Type Schiff-Base Complex and Vapochromic Detection of Volatile Organic Compounds

This contribution reports, through a combined thermogravimetric analysis, differential scanning calorimetry, UV-vis, powder X-ray diffraction, and Rietveld refinement analysis, on the stimuli-responsive chromic properties of a substituted Zn(salmal) Schiff-base Lewis acidic complex with unique and distinct thermo- and vapochromic characteristics. The solid complex obtained in air or by evaporation of the solvent from their THF solutions shows a marked thermochromism associated with a phase transition, unusually triggered by the reversible desorption/adsorption of one lattice water molecule. In contrast, the anhydrous solid, achieved from THF solutions of the complex by evaporation of the solvent under anhydrous conditions, behaves very differently as it does not show any absorption of water or thermochromism and exhibits varied vapochromic properties. Detection of volatile organic compounds having Lewis basicity is demonstrated by using the anhydrous solid or the related cast films on glass or paper substrates. In both cases, a marked vapochromism is observed upon exposure to vapors of various volatile species and involves well-defined optical absorptions and naked-eye color changes, also allowing the discrimination of primary aliphatic amines. Vapochromic behavior with the formation of stable, stoichiometric adducts is also demonstrated for both the solid obtained in air and the anhydrous solid or for the related cast films after exposure to vapors of pyridine.

Polycobaltoceniumylmethylene - A Water-Soluble Polyelectrolyte Prepared by Ring-Opening Transmetalation Polymerization

The synthesis of a water-soluble polycobaltoceniumylmethylene chloride (PCM-Cl) via ring-opening transmetalation polymerization is presented. Starting from a carba[1]magnesocenophane and cobalt(II) chloride, this route gives access to a polymer with methylene-bridged cobaltocenium moieties within the polymers' main-chain. The polymer was characterized by NMR spectroscopy, elemental analysis, TGA, DSC, XRD, and CV measurements, as well as UV-vis spectroscopy. Furthermore, GPC measurements in an aqueous eluent versus pullulan standards were conducted to gain insight into the obtained molar masses and distributions. In addition, the ion-dependent solubility was demonstrated by anion exchange, tuning the hydrophobic/hydrophilic properties of this redox-responsive material.

Investigating the Electrochemically Driven Capture and Release of Long-Chain PFAS by Redox Metallopolymer Sorbents

The remediation of perfluoroalkyl substances (PFAS) is an urgent challenge due to their prevalence and persistence in the environment. Electrosorption is a promising approach for wastewater treatment and water purification, especially through the use of redox polymers to control the binding and release of target contaminants without additional external chemical inputs. However, the design of efficient redox electrosorbents for PFAS faces the significant challenge of balancing a high adsorption capacity while maintaining significant electrochemical regeneration. To overcome this challenge, we investigate redox-active metallopolymers as a versatile synthetic platform to enhance both electrochemical reversibility and electrosorption uptake capacity for PFAS removal. We selected and synthesized a series of metallopolymers bearing ferrocene and cobaltocenium units spanning a range of redox potentials to evaluate their performance for the capture and release of perfluorooctanoic acid (PFOA). Our results demonstrate that PFOA uptake and regeneration efficiency increased with more negative formal potential of the redox polymers, indicating possible structural correlations with the electron density of the metallocenes. Poly(2-(methacryloyloxy)ethyl cobaltoceniumcarboxylate hexafluorophosphate) (PMAECoPF₆) showed the highest affinity toward PFOA, with an uptake capacity of more than 90 mg PFOA/g adsorbent at 0.0 V vs Ag/AgCl and a regeneration efficiency of more than 85% at -0.4 V vs Ag/AgCl. Kinetics of PFOA release showed that electrochemical bias greatly enhanced the regeneration efficiency when compared to open-circuit desorption. In addition, electrosorption of PFAS from different wastewater matrices and a range of salt concentrations demonstrated the capability of PFAS remediation in complex water sources, even at ppb levels of contaminants. Our work showcases the synthetic tunability of redox metallopolymers for enhanced electrosorption capacity and regeneration of PFAS.

Redox Polyelectrolytes with pH-Sensitive Electroactive Functionality in Aqueous Media

A framework of ferrocene-containing polymers bearing adjustable pH- and redox-active properties in aqueous electrolyte environments was developed. The electroactive metallopolymers were designed to possess enhanced hydrophilicity compared to the vinylferrocene (VFc) homopolymer, poly(vinylferrocene) (PVFc), by virtue of the comonomer incorporated into the macromolecule, and could also be prepared as conductive nanoporous carbon nanotube (CNT) composites that offered a variety of different redox potentials spanning a ca. 300 mV range. The presence of charged non-redox-active moieties such as methacrylate (MA) in the polymeric structure endowed it with acid dissociation properties that interacted synergistically with the redox activity of the ferrocene moieties to impart pH-dependent electrochemical behavior to the overall polymer, which was subsequently studied and compared to several Nernstian relationships in both homogeneous and heterogeneous configurations. This zwitterionic characteristic was leveraged for the enhanced electrochemical separation of several transition metal oxyanions using a P(VFc_0.63-co-MA_0.37)-CNT polyelectrolyte electrode, which yielded an almost twofold preference for chromium as hydrogen chromate versus its chromate form, and also exemplified the electrochemically mediated and innately reversible nature of the separation process through the capture and release of vanadium oxyanions. These investigations into pH-sensitive redox-active materials provide insight for future developments in stimuli-responsive molecular recognition, with extendibility to areas such as electrochemical sensing and selective separation for water purification.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Development of ruthenium polypyridine metallo-monomers and characterization of their metallopolymers obtained by ROMP

New monomeric ligands inserted in ruthenium polypyridine complexes generated metallomonomers that were copolymerized with NBE by ROMP resulting in metallopolymers.

Metallopolymers in minutes via organocatalysis at room temperature

Organocatalytic ring-opening polymerization of cyclic carbonate monomers derivatized with metallocenes is described for the rapid synthesis of high Mn metallopolymers.

Colloidal Self-Assembly Approaches to Smart Nanostructured Materials

Colloidal self-assembly refers to a solution-processed assembly of nanometer-/micrometer-sized, well-dispersed particles into secondary structures, whose collective properties are controlled by not only nanoparticle property but also the superstructure symmetry, orientation, phase, and dimension. This combination of characteristics makes colloidal superstructures highly susceptible to remote stimuli or local environmental changes, representing a prominent platform for developing stimuli-responsive materials and smart devices. Chemists are achieving even more delicate control over their active responses to various practical stimuli, setting the stage ready for fully exploiting the potential of this unique set of materials. This review addresses the assembly of colloids into stimuli-responsive or smart nanostructured materials. We first delineate the colloidal self-assembly driven by forces of different length scales. A set of concepts and equations are outlined for controlling the colloidal crystal growth, appreciating the importance of particle connectivity in creating responsive superstructures. We then present working mechanisms and practical strategies for engineering smart colloidal assemblies. The concepts underpinning separation and connectivity control are systematically introduced, allowing active tuning and precise prediction of the colloidal crystal properties in response to external stimuli. Various exciting applications of these unique materials are summarized with a specific focus on the structure-property correlation in smart materials and functional devices. We conclude this review with a summary of existing challenges in colloidal self-assembly of smart materials and provide a perspective on their further advances to the next generation.

Half-sandwich manganese complexes Cp(CO)2Mn(NHC) as redox-active organometallic fragments

Oxidation of the half-sandwich Mn^I complexes Cp(CO)₂Mn(NHC) bearing dialkyl-, arylalkyl- and diarylsubstituted N-heterocyclic carbene ligands (NHC = IMe, IMeMes, IMes) affords the corresponding stable Mn^II radical cations [Cp(CO)₂Mn(NHC)](BF₄) isolated in 92-95% yield. Systematic X-ray diffraction studies of the series of Mn^I and Mn^II NHC complexes revealed the expected characteristic structural changes upon oxidation, namely the elongation of the Mn-CO and Mn-NHC bonds as well as the diminution of the OC-Mn-CO angle. ESR spectra of [Cp(CO)₂Mn(IMes)](BF₄) in frozen solution (CH₂Cl₂/toluene 1 : 1, 70 K) allowed the identification of two conformers for this complex and their structural assignment using DFT calculations. The stability of these NHC complexes in both metal oxidation states, moderate oxidation potentials and the ease of detection of Mn^II species by a variety of spectroscopic techniques (UV-Vis, IR, paramagnetic ¹H NMR, and ESR) make these compounds promising objects for applications as redox-active organometallic fragments.

Design of Switchable Enzyme Carriers Based on Stimuli-Responsive Porous Polymer Membranes for Bioapplications

Design of efficient enzyme carriers, where enzymes are conjugated to supports, has become an attractive research avenue. Immobilized enzymes are advantageous for practical applications because of their convenience in handling, ease of separation, and good reusability. However, the main challenge is that these traditional enzyme carriers are unable to regulate the enzymolysis efficiency or to protect the enzymes from proteolytic degradation, which restricts their effectiveness of enzymes in bioapplications. Enlightened by the stimuli-responsive channels in the natural cell membranes, conjugation of the enzymes within flat-sheet stimuli-responsive porous polymer membranes (SR-PPMs) as artificial cell membranes is an efficient strategy for circumventing this challenge. Controlled by the external stimuli, the multifunctional polymer chains, which are incorporated within the membranes and attached to the enzyme, change their structures to defend the enzyme from the external environmental disturbances and degradation by proteinases. Specifically, smart SR-PPM enzyme carriers (SR-PPMECs) not only permit convective substrate transfer through the accessible porous network, dramatically improving enzymolysis efficiency due to the adjustable pore sizes and the confinement effect, but they also act as molecular switches for regulating its permeability and selectivity. In this review, the concept of SR-PPMECs is presented. It covers the latest developments in design strategies of flat-sheet SR-PPFMs, fabrication protocols of SR-PPFMECs, strategies for the regulation of enzymolysis efficiency, and their cutting-edge bioapplications.

ROMP Synthesis of Side-Chain Ferrocene-Containing Polyelectrolyte and Its Redox-Responsive Hydrogels Showing Dramatically Improved Swelling with β-Cyclodextrin

A new side-chain ferrocene (Fc)-containing polyelectrolyte has been synthesized by controlled ring-opening metathesis polymerization of a water-soluble Fc-containing norbornene-based quaternary ammonium salt, as well as the corresponding covalently cross-linked polyelectrolyte hydrogel. In order to provide Fc-containing supramolecular polyelectrolyte hydrogels whose swelling property is largely improved by host-guest interaction, a covalently cross-linked polyelectrolyte hydrogel is soaked into the β-CD aqueous solution to form β-CD@Fc supramolecular polyelectrolyte hydrogel, or alternatively the quaternary ammonium salt supramolecular monomer is first formed, then copolymerized with a crosslinking agent to fabricate the supramolecular hydrogel with better water absorption ability. All the Fc-containing hydrogels exhibited good redox-responsiveness with swelling-shrinking behaviors by chemically reversibly adjusting the disassembly/assembly of β-CD@Fc inclusion complexes. This is the first example of side-chain Fc-containing polycationic supramolecular hydrogels possessing swelling-shrinking properties based on the splitting/combining of β-CD and Fc units, and potential applications are expected as controlled drug delivery and actuators.

Mechanistic Investigation on Copper-Arylacetylide Polymerization and Sensing Applications

Exploration of new polymerization reactions is very intriguing in fundamental and practical research, which will advance reaction theories and produce various functional materials. Herein, we report a new polymerization method based on the reaction of Cu^I and arylacetylide, which generates linear polymers with high molecular weight and low polydispersity index of molecular weight. The Cu-arylacetylide polymerization exhibits different characteristics with traditional polymerizations such as mild reaction temperature, air atmosphere reaction, high molecular weight, fast polymerization rate, and imprecise molar ratio between monomers. The bond formation path and activation energy of each step was investigated by density functional theory calculations to understand the reaction mechanism. The poly(Cu-arylacetylide)s exhibit strong fluorescence emission and inherent semiconductive properties, which have been used to fabricate an electronic device for streptavidin sensing.

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

Ceramic fibers are high-tech structural key components of ceramic matrix composites (CMCs), which are a very promising class of materials for applications in next-generation turbines, especially nonoxide ceramic fibers, usually produced by the polymer-derived ceramics (PDC) route, which possess the enhanced mechanical and thermostructural properties necessary to withstand the harsh conditions (temperature and atmosphere) imposed on CMCs. However, recycling composite materials, such as fiber-reinforced polymers and CMCs, is still a big challenge. Here, we present for the first time the processing of superparamagnetic iron-containing ceramic fibers, which, due to their magnetic properties, can be separated from the matrix material of a composite. The synthesis strategy of the novel functional ceramic fibers is based on a tailored reaction of polyorganosilazane with an iron complex, resulting in a suitable, meltable polymer. After melt-spinning and curing, subsequent pyrolysis leads to superparamagnetic ceramic fibers with a saturation magnetization of 1.54 emu g^-1 because of in situ-formed iron silicide nanoparticles of an average size of 7.5 nm, homogeneously dispersed in an amorphous SiCNO matrix. Moreover, the ceramic fibers exhibit a tensile strength of 1.24 GPa and appropriate oxidation resistance. The developed versatile reaction strategy allows also for the incorporation of other elements to implement further functionalities for processing of multifunctional composites.

Rings and Chains: Synthesis and Characterization of Polyferrocenylmethylene

The synthesis and characterization of polyferrocenylmethylene (PFM) starting from dilithium 2,2-bis(cyclopentadienide)propane and a Me₂ C[1]magnesocenophane is reported. Molecular weights of up to M_w  = 11 700 g mol^-1 featuring a dispersity, Ð, of 1.40 can be achieved. The material is studied by different methods comprising nuclear magnetic resonance (NMR) spectroscopy, matrix-assisted laser desorption/ionization time of flight (MALDI-ToF) mass spectrometry, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) measurements elucidating the molecular structure and thermal properties of these novel polymers. Moreover, cyclic voltammetry (CV) reveals quasi-reversible oxidation and reduction behavior and communication between the iron centers. Also, the crystal structure of a related cyclic hexamer is presented.

Stress-responsive properties of metallocenes in metallopolymers

This review article combines the field of metallopolymers and stress-responsiveness on a molecular level, namely, metallocenes, as emerging stress-responsive building blocks for materials.

Multiple applications of polymers containing electron-reservoir metal-sandwich complexes

Ferrocene-containing polymers have been investigated for more than six decades, and more recently modern synthetic methods have allowed the fabrication of precise polymers that contain a variety of transition-metal complexes. Trends are now oriented towards applications, such as optics, energy conversion and storage, electrochemistry, magnetics, electric conductors and biomedicine. Metal-sandwich complexes such as those of ferrocene type and other related complexes that present redox-robust groups in polymers, i.e. that are isolable in both their oxidized and reduced forms, are of particular interest, because it is possible to address them using electronic or photonic redox stimuli for application. Our research groups have called such complexes Electron-Reservoirs and introduced them in the main chain or in the side chains of well-defined polymers. For instance, polymers with ferrocene in the main chain or in the side chain are oxidized to stable polycationic polyelectrolytes only if ferrocene is part of a biferrocene unit, because biferrocene oxidation leads to the biferrocenium cation that is stabilized by the mixed valency. Then a group of several redox-robust iron sandwich complexes were fabricated and incorporated in precise polymers including multi-block copolymers whose controlled synthesis and block incorporation was achieved for instance using ring-opening-metathesis polymerization. Applications of this family of Electron-Reservoir-containing polymers includes electrochemically induced derivatization of electrodes by decorating them with these polymers, molecular recognition and redox sensing, electrochromics with multiple colours, generation of gold and silver nanoparticles of various size by reduction of gold(iii) and silver(i) precursors and their use for nanocatalysis towards depollution and biomedicine.

Ferrocene Introduced into 5-Methylresorcinol-Based Organic Aerogels

The polycondensation sol-gel reaction of 5-methylresocinol and formaldehyde with additional compounds in reaction media is a relatively simple way to produce modified aerogels. In order to obtain aerogels with a large surface area and high porosity, the conditions for gel formation, the solvent exchange process before drying, and the supercritical drying process were optimized. A successful attempt was made to introduce ferrocene units into 5-methylresocinol-formaldehyde-based aerogels. The resulting aerogels are amorphous substrates, and no aggregated ferrocene units were found in their structures. All of the aerogel samples that were obtained are structurally similar despite differences in the original ferrocene units and their initial concentration. It was found that the inclusion limit of ferrocene structural blocks into an aerogel is ~6% wt. The structures of the inclusions in which all of the Fe atoms in the aerogel substrates were present in ferrocene/ferrocenium at an approximate ratio of 60/40 to 55/45 were confirmed by X-ray photoelectron spectroscopy and Mössbauer spectroscopy. Aerogels with ferrocene/ferrocenium inclusions are likely to exhibit reversible redox activity in reactions with gaseous reagents.

Design of Active Interfaces Using Responsive Molecular Components

Responsive interfaces are interfaces that show a defined and reversible change in physical properties in response to external stimuli. Typically, responsive interfaces result from the immobilization of responsive molecular components at the interface that translate a nanoscale signal into a macroscopic effect. Responsive interfaces can also be obtained if the topology of the interface can be reversibly changed using an external stimulus. As the surface of any material is its connection to the environment, responsive interfaces provide opportunities for interactive materials which are not only able to change properties upon demand, but also sense their environment and act autonomously. The application of responsive molecular components at interfaces, however, requires chemical and physical compatibility with the material surface of interest, posing a challenge not least in the retention of the responsive functionality. The state of the art in "active" interfaces which display responsive wettability, permeability, or adhesion is discussed, with a particular emphasis on microscale and nanoscale patterning since patterned interfaces can give rise to unique material properties. Finally, perspectives in the development of responsive interfaces, as well as promising approaches for bypassing the most prominent challenges are discussed.

Functional Metalloblock Copolymers for the Preparation and In Situ Functionalization of Porous Silica Films

Stimuli-responsive mesoporous silica films were prepared by evaporation-induced self-assembly through the physical entrapment of a functional metalloblock copolymer structuring agent, which simultaneously served to functionalize the mesopore. After end-functionalization with a silane group, the applied functional metalloblock copolymers were covalently integrated into the silica mesopore wall. In addition, they were partly degraded after the formation of the mesoporous film, which enabled the precise design of accessible mesopores. These polymer-silica hybrid materials exhibited remarkable and gating ionic permselectivity and offer the potential for highly precise pore filling design and combination with high-throughput printing techniques. This in situ functionalization strategy of mesoporous silica using responsive metalloblock copolymers has the potential to improve how we approach the design of complex architectures at the nanoscale for tailored transport. This functionalization strategy paves the way for a variety of technologies based on molecular transport in nanoscale pores, including separation, sensing, catalysis, and energy conversion.

Synthesis of Site-specific Charged Metallopolymers via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Site-specific cobaltocenium-labeled polymers are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization using cobaltocenium-labeled chain transfer agents. These chain transfer agents show counterion-dependent solubility. Based on the chemical structure of the chain transfer agents, single cobaltocenium moieties are dictated to be in predetermined locations at either the center or terminals of the polymer chains. Polymerization of hydrophobic monomers (methyl methacrylate, methyl acrylate and styrene) and hydrophilic monomers (2-(dimethylamino)ethyl methacrylate and methacrylic acid) is demonstrated to follow a controlled manner based on kinetic studies. Cobaltocenium-labeled polymers with molecular weights greater than 100,000 Da can be prepared by using a difunctional chain transfer agent. Photophysical properties, electrochemical properties, thermal properties and morphology of the cobaltocenium-labeled polymers are also investigated.

Metallopolymer-block-oligosaccharide for sub-10 nm microphase separation

The novel high-χ BCPs comprising poly(vinyl ferrocene) and oligosaccharides formed hexagonal cylinder morphology with d values of ∼8 nm. Lamellar morphology with d values of ∼9 nm was also realized by mixing these polymers and glucose.

Model-based design and synthesis of ferrocene containing microgels

Modelling and synthesis go hand in hand to efficiently engineer copolymer microgels with various architectures: core–shell structures (with ferrocene mainly in the core or in the shell) and also microgels with homogeneous comonomer distribution.