Synthesis of Surface-Modification-Oriented Nanosized Molybdenum Disulfide with High Peroxidase-Like Catalytic Activity for H2 O2 and Cholesterol Detection

Janus and Amphiphilic MoS2 2D Sheets for Surface-Directed Orientational Assemblies toward Ex Vivo Dual Substrate Release

The two-dimensional (2-D) Janus and amphiphilic molybdenum disulfide (MoS2) nanosheet with opposite optical activities on each side (amphichiral) is synthesized by modifying sandwich-like bulk MoS2 with tannic acid and cholesterol through biphasic emulsion method. This new type of amphichiral Janus MoS2 nanosheet consists of a hydrophilic and positive optical activity tannic acid side as well as a hydrophobic and negative optical activity cholesterol side thereby characterized by circular dichroism. Surface-directed orientational differentiation assemblies are performed for the as-synthesized 2D material and are characterized by contact angle, infrared spectroscopy, X-ray photoelectron, and circular dichroism spectroscopies. The amphiphilic nature of the materials is demonstrated by the pre-organization of the nanosheets on either hydrophobic or hydrophilic surfaces, providing unprecedented properties of circular dichroism signal enhancement and wettability. Selective detachment of the surface organic groups (cholesterol and tannic acid fragments) is realized by matrix-assisted laser desorption/ionisation - time-of-flight (MALDI-TOF) mass spectrometry, and the dual substrate release in tissue is detected by ex vivo mass spectrometry imaging.

EGCG-vanadium nanomedicine with neutral pH Fenton reaction activity inhibits heat shock proteins for enhanced photothermal/chemodynamic therapy

A burgeoning interest has recently focused on the development of nanomedicine to integrate noninvasive photothermal therapy (PTT) and chemodynamic therapy (CDT) for synergistic tumor treatments, owing to PTT's amplification effect on CDT. However, challenges emerge as hyperthermia often induces an unwarranted overexpression of cytoprotective heat shock proteins (HSPs), thereby curtailing PTT efficacy. Additionally, the nearly neutral tumor intracellular pH (pHi ≈ 7.2) that handicaps the Fenton reaction poses a leading limitation to CDT. Addressing these hurdles, we introduce EVP, a nanomedicine developed through the straightforward assembly of epigallocatechin gallate (EGCG), vanadium sulfate (VOSO4), and Pluronic F-127 (PF127). EVP comprehensively downregulates overexpressed HSPs (HSP 60, 70, 90) through the collaborative action of EGCG and vanadyl (VO2+). Moreover, the tumor intracellular pH-processed Fenton-like reaction by VO2+ ensures highly efficient hydroxyl radicals (OH) production in cytosols, overcoming the stringent acidity requirement for CDT. Additionally, the hyperthermia induced by PTT augments OH production, further enhancing CDT efficacy. In vitro and in vivo experiments validate EVP's excellent biocompatibility and potent tumor inhibition, highlighting its substantial potential in tumor therapy.

Trimethyltin chloride exposure induces apoptosis and necrosis and impairs islet function through autophagic interference

Trimethyltin chloride (TMT) is a highly toxic organotin compound often used in plastic heat stabilizers, chemical pesticides, and wood preservatives. TMT accumulates mainly through the environment and food chain. Exposure to organotin compounds is associated with disorders of glucolipid metabolism and obesity. The mechanism by which TMT damages pancreatic tissue is unclear. For this purpose, a subacute exposure model of TMT was designed for this experiment to study the mechanism of damage by TMT on islet. The fasting blood glucose and blood lipid content of mice exposed to TMT were significantly increased. Histopathological and ultrastructural observation and analysis showed that the TMT-exposed group had inflammatory cell infiltration and necrosis. Then, mouse pancreatic islet tumour cells (MIN-6) were treated with TMT. Autophagy levels were detected by fluorescence microscopy. Real-time quantitative polymerase chain reaction and Western blotting were used for verification. A large amount of autophagy occurred at a low concentration of TMT but stagnated at a high concentration. Excessive autophagy activates apoptosis when exposed to low levels of TMT. With the increase in TMT concentration, the expression of necrosis-related genes increased. Taken together, different concentrations of TMT induced apoptosis and necrosis through autophagy disturbance. TMT impairs pancreatic (islet β cell) function.

Two-Dimensional Transition Metal Dichalcogenide Based Biosensors: From Fundamentals to Healthcare Applications

There has been an exponential surge in reports on two-dimensional (2D) materials ever since the discovery of graphene in 2004. Transition metal dichalcogenides (TMDs) are a class of 2D materials where weak van der Waals force binds individual covalently bonded X-M-X layers (where M is the transition metal and X is the chalcogen), making layer-controlled synthesis possible. These individual building blocks (single-layer TMDs) transition from indirect to direct band gaps and have fascinating optical and electronic properties. Layer-dependent opto-electrical properties, along with the existence of finite band gaps, make single-layer TMDs superior to the well-known graphene that paves the way for their applications in many areas. Ultra-fast response, high on/off ratio, planar structure, low operational voltage, wafer scale synthesis capabilities, high surface-to-volume ratio, and compatibility with standard fabrication processes makes TMDs ideal candidates to replace conventional semiconductors, such as silicon, etc., in the new-age electrical, electronic, and opto-electronic devices. Besides, TMDs can be potentially utilized in single molecular sensing for early detection of different biomarkers, gas sensors, photodetector, and catalytic applications. The impact of COVID-19 has given rise to an upsurge in demand for biosensors with real-time detection capabilities. TMDs as active or supporting biosensing elements exhibit potential for real-time detection of single biomarkers and, hence, show promise in the development of point-of-care healthcare devices. In this review, we provide a historical survey of 2D TMD-based biosensors for the detection of bio analytes ranging from bacteria, viruses, and whole cells to molecular biomarkers via optical, electronic, and electrochemical sensing mechanisms. Current approaches and the latest developments in the study of healthcare devices using 2D TMDs are discussed. Additionally, this review presents an overview of the challenges in the area and discusses the future perspective of 2D TMDs in the field of biosensing for healthcare devices.

Heparin-enhanced peroxidase-like activity of iron-cobalt oxide nanosheets for sensitive colorimetric detection of trypsin

Iron-cobalt oxide nanosheets (FeCo-ONSs) were proved to have intrinsic peroxidase-like activity. Additionally, the peroxidase-like activity of FeCo-ONSs toward the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) was dramatically enhanced after heparin addition due to the stronger affinity toward TMB. Protamine combines with heparin, so the promotion of peroxidase-like activity of FeCo-ONSs with heparin was suppressed. With the addition of trypsin, protamine was hydrolyzed and the enhancement effect of catalytic activity of FeCo-ONSs was recovered. Based on above process, a sensitive colorimetric platform for trypsin activity determination was constructed through measuring the absorbance of produced oxTMB at 652 nm, providing a linear detection range of 5 to 500 ng/mL and a low detection limit of 2.8 ng/mL. The method was applied to trypsin determination in real samples (human urine sample and multienzyme tablet sample) with satisfactory results, illustrating the potential application of this biosensor.

Transition Metal Dichalcogenides (TMDC)-Based Nanozymes for Biosensing and Therapeutic Applications

Nanozymes, a type of nanomaterial with enzyme-like properties, are a promising alternative to natural enzymes. In particular, transition metal dichalcogenides (TMDCs, with the general formula MX2, where M represents a transition metal and X is a chalcogen element)-based nanozymes have demonstrated exceptional potential in the healthcare and diagnostic sectors. TMDCs have different enzymatic properties due to their unique nano-architecture, high surface area, and semiconducting properties with tunable band gaps. Furthermore, the compatibility of TMDCs with various chemical or physical modification strategies provide a simple and scalable way to engineer and control their enzymatic activity. Here, we discuss recent advances made with TMDC-based nanozymes for biosensing and therapeutic applications. We also discuss their synthesis strategies, various enzymatic properties, current challenges, and the outlook for future developments in this field.

Glutathione Disulfide as a Reducing, Capping, and Mass-Separating Agent for the Synthesis and Enrichment of Gold Nanoclusters

Water-soluble nanoclusters, which are facilely enrichable without changes in the original properties, are highly demanded in many disciplines. In this contribution, a new class of gold nanoclusters (AuNCs) was synthesized using glutathione disulfide (GSSG) as a reducing and capping agent under intermittent heating mode. The as-prepared GSSG–AuNCs had a higher quantum yield (4.1%) compared to the conventional glutathione-protected AuNCs (1.8%). Moreover, by simply introducing the GSSG–AuNC solution to acetonitrile at a volume ratio of 1:7, a new bottom phase was formed, in which GSSG–AuNCs could be 400-fold enriched without changes in properties, with a percentage recovery higher than 99%. The enrichment approach did not need additional instruments and was potentially suitable for large-scale enrichment of nanoclusters. Further, density functional theory calculations indicated that the hydrogen bonding between GSSG and acetonitrile plays a key role for the bottom phase formation. Our work suggests that the highly emissive GSSG–AuNCs possess great potential not only in fluorescent measurements but also in other scenarios in which high-concentration AuNCs may be needed, such as catalysis, drug delivery, and electronic and optical industries.

5,10,15,20-tetrakis (4-carboxyl phenyl) porphyrin-functionalized urchin-like CuCo2O4 as an excellent artificial nanozyme for determination of dopamine

Urchin-like peroxidase mimics 5,10,15,20-tetrakis (4-carboxyl phenyl) porphyrin-functionalized CuCo2O4 nanospheres (Por-CuCo2O4) has been fabricated as an excellent visual biosensor. X-ray diffractometry (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) have been employed to characterize the composition, morphologies, and elemental analysis of the as-synthesized Por-CuCo2O4. The catalytic activity of Por-CuCo2O4 was evaluated by the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) with the aid of H2O2, which exhibited a visual blue change with an absorption maximum at 652 nm for only 10 s. The peroxidase-like behaviors of Por-CuCo2O4 conformed to the Michaelis-Menten equation. Electrochemistry, radical scavenger, and fluorescence probe experiments verified that electron transfer, •O2- radicals, and holes (h+) are the important factors during the catalytic oxidation of TMB. Based on the inhibition of dopamine (DA) on TMB oxidation, the Por-CuCo2O4-based colorimetric biosensor has been successfully constructed for sensitive determination of DA witha detection limit (LOD) of 0.94 μΜ. In addition, colorimetry was validated to detect DA in serum samples with high sensitivity and good selectivity. 5,10,15,20-tetrakis (4-carboxyl phenyl) porphyrin-functionalized urchin-like CuCo2O4 (Por-CuCo2O4) with excellent peroxidase activity, ascribed to the synergistic effect between •O2- radicals and holes (h+). A fast colorimetric sensor on the basis of Por-CuCo2O4 has been constructed to quantitatively determine dopamine concentration in human serums.

Molybdenum disulfide-based materials with enzyme-like characteristics for biological applications

Nanozyme, a kind of nanomaterials with enzymatic activity, has been developing vigorously over the past years owing to its advantages such as low-cost, easy storage, ease of use in harsh environments and so on, compared with natural enzymes. At present, as a typical two-dimensional nanomaterial, molybdenum disulfide (MoS₂) and their hybrids with unexpected enzyme-like activities have caused wide attention. In this review, we mainly investigated the enzyme-like activities of MoS₂ based nanomaterials, including peroxidase-like activity, catalase-like activity and superoxide dismutase-like activity. Furthermore, we systematically introduce recent research progress of MoS₂ based nanomaterials in the fields of biological applications such as radiation protection, cancer therapy, antibacterial, and wound healing. Finally, the current challenges and perspectives of MoS₂ based nanomaterials in the future are also discussed and proposed. We expect this review may be significant to understand the properties of MoS₂ based nanomaterials and the development of two-dimensional nanomaterials with enzyme mimicking activities.

Magnetic Nanoparticle-Based Ligand Replacement Strategy for Chemical Luminescence Determination of Cholesterol

Determination of serum cholesterol (Chol) is important for disease diagnosis, and has attracted great attention during the last few decades. Herein, a new magnetic nanoparticle-based ligand replacement strategy has been presented for chemical luminescence detection of Chol. The detection depends on ligand replacement from ferrocene (Fc) to Chol through a β-cyclodextrin (β-CD)-based host-guest interaction, which releases Fc-Hemin as a catalyst for the luminol/hydrogen peroxide chemical luminescence system. More importantly, the luminescence signal can be captured by the camera of a smartphone, thus realizing Chol detection with less instrument dependency. The limit of detection of this method is calculated to be 0.18 μM, which is comparable to some of the developed methods. Moreover, this method has been used successfully to quantify Chol from serum samples with a simple extraction process.

On-Site Colorimetric Detection of Cholesterol Based on Polypyrrole Nanoparticles

Herein, we report a facile method for cholesterol detection by coupling the peroxidase-like activity of polypyrrole nanoparticles (PPy NPs) and cholesterol oxidase (ChOx). ChOx can catalyze the oxidation of cholesterol to produce H₂O₂. Subsequently, PPy NPs, as a nanozyme, induce the reaction between H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB). Under optimal conditions, the increase is proportional to cholesterol with concentrations from 10 to 800 μM in absorbance of TMB at 652 nm. The linear range for cholesterol is 10-100 μM, with a detection limit of 3.5 μM. This reported method is successfully employed for detection of cholesterol in human serum. The recovery percentage is ranged within 96-106.9%. Furthermore, we designed a facile and simple portable assay kit using the proposed system, realizing the on-site semiquantitative and visual detection of cholesterol in human serum. The cholesterol content detected from the portable assay kit were closely matching those obtained results from solution-based assays, thereby holding great potential in clinical diagnosis and health management.

Colorimetric detection of cholesterol based on peroxidase mimetic activity of GoldMag nanocomposites

Herein, Gold and magnetic particles (GoldMag), an enzyme mimetic of horseradish peroxidase (HRP), have been designed to construct a colorimetric sensor for cholesterol (Cho). The well-dispersed GoldMag was successfully prepared by green reduction using a self-assembly method based on the surface amino groups, and characterized by Fourier transform infrared (FTIR), X-Ray Photoelectron Spectroscopic (XPS) techniques. In the presence of H₂O₂, the resulting nanocomposites possessed enhanced intrinsic peroxidase-like activity and could catalytically oxidize 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) to produce a green colored product, which could be observed apparently by the naked eye. Based on the outstanding catalytic activity, the designed colorimetric sensor displayed a linear response for cholesterol in the range from 0.1 mg/mL to 7.5 mg/mL with a detection limit as low as 0.003 mg/mL. The proposed method was validated to determine cholesterol in real samples with satisfactory results.

Thiolated poly(aspartic acid)-functionalized two-dimensional MoS2, chitosan and bismuth film as a sensor platform for cadmium ion detection

In this work, a sensitive electrochemical platform for determination of cadmium ions (Cd2+) is obtained using thiolated poly(aspartic acid) (TPA)-functionalized MoS2 as a sensor platform by differential pulse anodic stripping voltammetry (DPASV). The performance of the TPA-MoS2-modified sensor is systemically studied. It demonstrates that the TPA-MoS2 nanocomposite modified sensor exhibits superior analytical performance for Cd2+ over a linear range from 0.5 μg L-1 to 50 μg L-1, with a detection limit of 0.17 μg L-1. Chitosan is able to form a continuous coating film on the surface of the GC electrode. The good sensing performance of the TPA-MoS2-modified sensor may be attributed to the following factors: the large surface area of MoS2 (603 m2 g-1), and the abundant thiol groups of TPA. Thus, the TPA-MoS2-modified sensor proves to be a reliable and environmentally friendly tool for the effective monitoring of Cd2+ existing in aquacultural environments.

In situ polymerization and covalent functionalisation of trithiocyanuric acid by MoS2 nanosheets resulting in a novel nanozyme with enhanced peroxidase activity

MoS₂ catalysed the polymerisation of trithiocyanuric acid, resulting in a network exhibiting peroxidase activity via a ping-pong mechanism.

High-activity Mo, S co-doped carbon quantum dot nanozyme-based cascade colorimetric biosensor for sensitive detection of cholesterol

Nanozymes have drawn considerable attention because of their lower cost, higher stability and convenient preparation compared to protein enzymes. In the present work, Mo, S co-doped carbon quantum dots (Mo-CQDs) as a peroxidase mimic were used to fabricate a cascade colorimetric biosensor to detect cholesterol. The Mo-CQDs possess a robust peroxidase-like activity, and they can easily catalyze 3,3,5,5-tetramethylbenzidine (TMB) to produce an oxidized TMB in the presence of H₂O₂. The Mo, S doping in the carbon quantum dots (CQDs) notably boosts the yield of CQDs and may facilitate the electron transfer between TMB and H₂O₂, which further enhances the catalytic activity of CQDs. The colorimetric biosensor based on Mo-CQDs and cholesterol oxidase exhibited excellent selectivity and high sensitivity for cholesterol in the range of 0.01-1.0 mM along with a detection limit as low as 7 μM. The total cholesterol concentration in the serum sample was measured with satisfactory results and read out by the naked eye, indicating the potential application in clinical diagnosis and portable test kits.

Manganese dioxide nanosheets: from preparation to biomedical applications

Advancements in nanotechnology and molecular biology have promoted the development of a diverse range of models to intervene in various disorders (from diagnosis to treatment and even theranostics). Manganese dioxide nanosheets (MnO₂ NSs), a typical two-dimensional (2D) transition metal oxide of nanomaterial that possesses unique structure and distinct properties have been employed in multiple disciplines in recent decades, especially in the field of biomedicine, including biocatalysis, fluorescence sensing, magnetic resonance imaging and cargo-loading functionality. A brief overview of the different synthetic methodologies for MnO₂ NSs and their state-of-the-art biomedical applications is presented below, as well as the challenges and future perspectives of MnO₂ NSs.