Highly Efficient Photocatalytic Degradation of Dyes by a Copper–Triazolate Metal–Organic Framework

Copper-Based Two-Dimensional Metal-Organic Frameworks for Fenton-like Photocatalytic Degradation of Methylene Blue under UV and Sunlight Irradiation

To efficiently degrade organic pollutants, photocatalysts must be effective under both ultraviolet (UV) radiation and sunlight. We synthesized a series of new metal-organic frameworks by using mild hydrothermal conditions. These frameworks incorporate three distinct bipyridyl ligands: pyrazine (pyr), 4,4'-bipyridine (bpy), and 1,2-bis(4-pyridyl)ethane (bpe). The resulting compounds are denoted as [Cu(pyz)(H2O)2MF6], [Cu(bpy)2(H2O)2]·MF6, and [Cu(bpe)2(H2O)2]·MF6·H2O [M = Zr (1, 3, and 5) and Hf (2, 4, and 6)]. All six compounds exhibited a two-dimensional crystal structure comprising infinitely nonintersecting linear chains. Compound 3 achieved 100% degradation of methylene blue (MB) after 8 min under UV irradiation and 100 min under natural sunlight in the presence of H2O2 as the electron acceptor. For compound 5, 100% MB degradation was achieved after 120 min under sunlight and 10 min under UV light. Moreover, reactive radical tests revealed that the dominant species involved in photocatalytic degradation are hydroxyl (•OH), superoxide radicals (•O2-), and photogenerated holes (h+). The photodegradation process followed pseudo-first-order kinetics, with photodegradation rate constants of 0.362 min-1 (0.039 min-1) for 3 and 0.316 min-1 (0.033 min-1) for 5 under UV (sunlight) irradiation. The developed photocatalysts with excellent activity and good recyclability are promising green catalysts for degrading organic pollutants during environmental decontamination.

Efficient electrochemical reduction of CO2 to CO in a flow cell device by a pristine Cu5tz6-cluster-based metal-organic framework

The electrochemical reduction of CO2 to CO is a powerful approach to achieving carbon neutrality. Herein, we report a five-nuclear copper cluster-based metal-azolate framework CuTz-1 as an electrocatalyst for the electrochemical CO2 reduction reaction. It achieved a faradaic efficiency (FE) of 62.7% for yielding CO with a partial current density of -35.1 mA cm-2 in flow cell device, which can be preserved for more than ten hours with negligible changes of the current density and FE(CO). Studies of electrocatalytic mechanism studies revealed that the distance of Cu-N was increased, and the coordination number of the Cu ion was reduced, while the oxidation state of Cu was decreased after the electrocatalysis. These findings offer valuable insights into structural changes that influence the performance of the catalyst during the process of the electrochemical reduction of CO2 process.

Rational synthesis of two isostructural thiophene-containing metal-organic frameworks toward photocatalytic degradation of organic pollutants

In this work, thiophene moieties (as the crucial functional groups) have been successfully incorporated into the skeleton of metal-organic frameworks (MOFs) by using thienyl-substituted triazole ligands. Reaction of AgCF3SO3 with 3-phenyl-5-(2-thienyl)-1,2,4-triazole (PTTzH) or 3,5-bis(2-thienyl)-1,2,4-triazole (BTTzH) afforded two isostructural MOFs (AgTz-3 and AgTz-4) in gram-scale. AgTz-4 with higher thiophene content showed significantly stronger photocatalytic activity than AgTz-3 with lower thiophene content. Noteworthy, the photodegradation rate constants of AgTz-4 were 0.055 mg·L-1·min-1 for rhodamine B and 0.24 min-1 for salazosulfapyridine, which is comparable or even higher than some MOF-based materials reported in the literature. More importantly, AgTz-4 demonstrated good reusability and stability after four cycles of photodegradation. Our experimental results revealed that the enhanced photodegradation efficiency can be attributed to the increased light absorption capacity and optimized band structure of Ag-MOFs resulting from the introduction of thiophene groups into MOF structures.

Catalytic innovations: Improving wastewater treatment and hydrogen generation technologies

The effective reduction of hazardous organic pollutants in wastewater is a pressing global concern, necessitating the development of advanced treatment technologies. Pollutants such as nitrophenols and dyes, which pose significant risks to both human and aquatic health, making their reduction particularly crucial. Despite the existence of various methods to eliminate these pollutants, they are not without limitations. The utilization of nanomaterials as catalysts for chemical reduction exhibits a promising alternative owing to their distinguished catalytic activity and substantial surface area. For catalytically reducing the pollutants NaBH4 has been utilized as a useful source for it because it reduces the pollutants quiet efficiently and it also releases hydrogen gas as well which can be used as a source of energy. This paper provides a comprehensive review of recent research on different types of nanomaterials that function as catalysts to reduce organic pollutants and also generating hydrogen from NaBH4 methanolysis while also evaluating the positive and negative aspects of nanocatalyst. Additionally, this paper examines the features effecting the process and the mechanism of catalysis. The comparison of different catalysts is based on size of catalyst, reaction time, rate of reaction, hydrogen generation rate, activation energy, and durability. The information obtained from this paper can be used to steer the development of new catalysts for reducing organic pollutants and generation hydrogen by NaBH4 methanolysis.

Interfacial and Electronic Modulation of M-Bridged Heterostructures with L-Tryptophan and Transition Metallic Oxides: Enhancing Corrosion Resistance and Photocatalytic Activity

Despite remarkable advancements in multilayer composite materials, achieving controlled growth on stationary platforms for optimal corrosion protection and photocatalytic capabilities remains a challenge. In this study, we introduce an innovative approach by integrating bifunctional metal-organic frameworks (MOFs) into plasma-electrolyzed layers made on AZ31 Mg alloy. Metallic oxides of Zr, Ti, and W serve as new pivotal centers for MOF formation, while L-tryptophan (Trp) acts as an organic linker. This innovative approach establishes an efficient electron transport system that acts as a functional pathway for creating highly effective and versatile materials. The tunable structure of the MOF/plasma electrolyzed layer enables it to concurrently display electrochemical stability and photocatalytic activity for the photodegradation of organic pollutants. Remarkably, the WOF complex emerges as a standout performer, effectively shielding the substrate from corrosive anion attacks. This sample showcases exceptional photocatalytic efficiency of 99.61% for crystal violet solution, with sustained performance after five cycles and a 72 h corrosion test (96.55% and 98.39% degradation, respectively). Moreover, DFT calculations elucidate the fundamental bonding modes between MOFs and inorganic constituents, delivering comprehensive insights into their structural formation. Our research addresses the critical challenge of achieving controlled growth for enhanced corrosion resistance and photocatalytic activity, demonstrating a novel pathway for creating multifunctional materials with practical applications across various fields.

Co-adsorption and Fenton-like oxidation in the efficient removal of methylene blue by MIL-88B@UiO-66 nanoflowers

Development of binary MOF-on-MOF heterostructures is a research hotspot in MOFs chemistry due to the advantages elicited by a closely connected interface, which may endow more abundant functionality and even broader applications in interface chemistry. A MOF-on-MOF heterostructure was constructed by in situ growth of MIL-88B on the outer surface of UiO-66. The resultant MIL-88B@UiO-66 produced had an interesting flower-like morphology composed of MIL-88B (petal) on tetrahedral UiO-66 (core). The MIL-88B@UiO-66 heterostructure showed adsorption and Fenton-like oxidation abilities, with distinctly improved structural stability in aqueous solution compared with that of single MIL-88B. Methylene blue (MB) was selected as the target molecule to evaluate the adsorption and Fenton-like oxidation activities. The efficiency of total removal of MB was studied systematically under various operating conditions and the influencing factors were optimized. The kinetics of adsorption and catalytic oxidation were simulated to explore the interactions between MB and MIL-88B@UiO-66. The mechanisms of enhanced adsorption and Fenton-like oxidation were suggested. The cyclic removal performance and structural stability of MIL-88B@UiO-66 were also determined.

Controllable synthesis of copper-organic frameworks via ligand adjustment for enhanced photo-Fenton-like catalysis

The efficient heterogeneous photo-Fenton-like catalysts based on two secondary ligand-induced Cu(II) metal-organic frameworks (Cu-MOF-1 and Cu-MOF-2) were constructed for the first time and investigated for the degradation of multiple antibiotics. Herein, two novel Cu-MOFs were prepared using mixed ligands by a facile hydrothermal method. The one-dimensional (1D) nanotube-like structure could be obtained by using V-shaped, long and rigid 4,4'-bis(3-pyridylformamide)diphenylether (3-padpe) ligand in Cu-MOF-1, while polynuclear Cu cluster could be prepared more easily by using short and small isonicotinic acid (HIA) ligand in Cu-MOF-2. Their photocatalytic performances were measured by degradation of multiple antibiotics in Fenton-like system. Comparatively, Cu-MOF-2 exhibited superior photo-Fenton-like performance under visible light irradiation. The outstanding catalytic performance of Cu-MOF-2 was ascribed to the tetranuclear Cu cluster configuration and excellent ability of photoinduced charge transfer and hole separation thus improved the photo-Fenton activity. In addition, Cu-MOF-2 showed high photo-Fenton activity in wide pH working range 3-10 and maintained wonderful stability after five cyclic experiments. The degradation intermediates and pathways were deeply studied. The main active species h⁺, O₂^- and OH worked together in photo-Fenton-like system and possible degradation mechanism was proposed. This study provided a new approach to design the Cu-based MOFs Fenton-like catalysts.

Development of MOF Based Recyclable Photocatalyst for the Removal of Different Organic Dye Pollutants

The preparation of metal organic frameworks (MOFs) has come to the forefront in recent years because of their outstanding physical and chemical properties. Many MOFs such as Zn, Co, Ni, Fe, and Ag, etc., have been successfully synthesized. In this work, we followed the solvothermal assisted route to synthesize Ag-MOF (abbreviated as AMOF) nanosheets and then applied them as a photocatalyst to remove different organic pollutants, namely methyl orange (MO), crystal violet (CV), and methylene blue (MB). Chemical composition, optical properties, morphology, and microstructural analysis were analyzed using XPS, UV-visible spectrophotometer, FESEM, TEM, and EDS, respectively. The structural properties of AMOF nanosheets were studied by X-ray diffraction (XRD). Nitrogen adsorption and desorption isotherm analysis were utilized to evaluate the specific surface area and pore size of the AMOF nanosheets. Further, AMOF nanosheets showed notable photocatalytic performance for various dye pollutants degradation. The results confirmed 74.5, 85.5, and 90.7% of MO, CV, and MB dye pollutants removal after 120 min of irradiation with the rate constants (k) of 0.0123, 0.0153, and 0.0158 min^-1, respectively. The effect of superoxide radicals (O₂^-) and photogenerated holes (h⁺) on the organic dye pollutants removal was investigated using radical scavenger trapping studies. Moreover, the stability study also confirmed the recyclability of the photocatalyst. Therefore, the findings of this research present a realizable method to grow AMOF photocatalyst for successful degradation of various dye pollutants.

Two Cu(i) coordination polymers based on a new benzimidazolyl-tetrazolyl heterotopic ligand for visible-light-driven photocatalytic dye degradation

Two Cu(i) CPs based on a new heterotopic tripodal ligand were constructed and their visible-light-driven photocatalytic performance were studied.

Recent Progress of Metal-Organic Framework-Based Photodynamic Therapy for Cancer Treatment

Photodynamic therapy (PDT), combining photosensitizers (PSs) and excitation light at a specific wavelength to produce toxic reactive oxygen species, has been a novel and promising approach to cancer treatment with non-invasiveness, spatial specificity, and minimal systemic toxicity, compared with conventional cancer treatment. Recently, numerous basic research and clinical research have demonstrated the potential of PDT in the treatment of a variety of malignant tumors, such as esophageal cancer, bladder cancer, and so on. Metal-organic framework (MOF) has been developed as a new type of nanomaterial with the advantages of high porosity, large specific surface area, adjustable pore size, and easy functionalization, which could serve as carriers to load PSs or increase the accumulation of PSs in target cells during PDT. Moreover, active MOFs have the potential to construct multifunctional systems, which are conducive to refining the tumor microenvironment (TME) and implementing combination therapy to improve PDT efficacy. Hence, a comprehensive and in-depth depiction of the whole scene of the recent development of MOFs-based PDT in cancer treatment is desirable. This review summarized the recent research strategies of MOFs-based PDT in antitumor therapy from the perspective of MOFs functions, including active MOFs, inactive MOFs, and their further combination therapies in clinical antitumor treatment. In addition, the bottlenecks and obstacles in the application of MOFs in PDT are also described.

Hybrid metal organic frameworks as an Exotic material for the photocatalytic degradation of pollutants present in wastewater: A review

In this world, water is considered as the Elixir for all living creatures. Human life rolls with water, and every activity depends upon water. Worldwide water resources are being contaminated due to the elevation in the population count, industrialization and urbanization. Ejection of chemicals by industries and domestic sewages remains the major reason in the destruction of natural water resources. Contaminated water with harmful microbes, chemical dyes, pesticides, and carcinogens are the root cause of many diseases and deaths of living species. In this scenario, researchers engaged in producing ultra components to remove the contaminants. Metal organic frameworks (MOF) are the desired combination of organic and inorganic materials to achieve the required target. MOFs possess unique characteristics like tunable internal structure, porosity, crystallinity and high surface area which enable them for energy and environmental application. For the past years, MOFs are concentrated more as a photocatalyst in the treatment of polluted water. These research studies discuss the improvement of photocatalytic performance of MOF by the incorporation of metals, metal coupled with nanoparticles like polymers, graphene, etc., into it to achieve the enhanced photocatalytic activity by scavenging entire chemicals and harmful microbes to retain the quality of water. The target of this review article is to focus on the state of the art research work on MOFs in photocatalytic water treatment technique.

2D→3D Polycatenated Cu(I) Coordination Polymer: Photocatalytic Property and Protective Activity on COPD by Reducing the INF-γ Production

Reported here is a new [Cu₄I₄] cluster-based coordination polymer, namely [Cu₄I₄(bib)₂]_n·n(DMF) (1, bib = 1,4-bis(imidazolyl)butane, DMF = N,N'-dimethylformamide), which was synthesized by the self-assemble reaction of CuI, bib and KI under solvothermal conditions. Remarkably, compound 1 shows promising photocatalytic performance toward to the degradation of MB solution under visible light irradiation. For the COPD treatment, the ELISA detection kit was conducted to determine the content of INF-γ released by the respiratory tract mucosal epithelial cells. In addition to this, the activation levels of the NF-κB signaling pathway were still need to be assessed by the real time RT-PCR after the compound treatment.

Separation and remediation of environmental pollutants using metal-organic framework-based tailored materials

Metal-organic frameworks (MOFs) are a polymer hybrid family of compounds comprising metal ions that have been deliberately incorporated in organic ligands to form several multi-dimensional structures with unique structural and functional attributes. They have the typical properties of brittleness, major porosity, and randomly crystalline. These three factors hampered their potential incorporation into modern technologies. However, with the discovery of their polymers, hope was rekindled. Polymers, unlike their counterparts, are versatile and malleable and can be tailored into solids with a wide range of technical applications. MOFs can be effectively incorporated into polymer structures, resulting in polymers with enhanced properties and increased demand, according to recent studies. This review focuses on the synthetic procedures of MOFs used to create hybrid materials, as well as their potential environmentally related applications. Desalination, hazardous heavy metal removal and mitigation, gas and liquid separations and purifications, and dye removal will all be extensively discussed as applications. To assemble this review, we will add insight from recent papers and discoveries, as well as seminal reports from experts on the advancement of MOF-polymers.

Photocatalytic degradation of Rhodamine-B by visible light assisted peroxymonosulfate activation using Z-scheme MIL-100(Fe)/Bi2S3 composite: a combined experimental and theoretical approach

The photocatalytic efficiency of binary MIL-100(Fe)/Bi2S3 (MIL-BS) composite was utilized towards visible light assisted peroxymonosulfate (PMS) activation and degradation of Rhodamine-B (RhB) dye. The binary catalyst, with 10wt% Bi2S3 (MIL-BS(10)),...

POM-based metal–organic compounds: Assembly, structures and properties

Four POM-based inorganic-organic hybrid compounds, which are {[(Cu·L1’·H2O)·(α-Mo8O26)0.5]·H2O}n (1), {(Cu·L2’·H2O)·(α-Mo8O26)0.5}n (2), {[(Cu·L3’·H2O)·(β-Mo8O26)0.5]·5H2O}n (3), {(Cu·L4’·H2O)·(β-Mo8O26)}n (4)[L1’ = 1,5-bis (4-carboxylpyridine) pentane dibromide, L2’ = 1,7-bis (4-carboxylpyridine) heptane dibromide, L3’ = 1,2-bis [(4-carboxylpyridine) - N-methylene] benzene dibromide, L4’ = 1,4-bis [(4-carboxylpyridine) - N-methylene] benzene dibromide] have been successfully synthesized under hydrothermal conditions by tuning ligands. Compounds 1–4 were characterized by single crystal X-ray diffraction, infrared spectrum (IR), powder X-ray diffraction (PXRD), and thermogravimetric (TG). The transformation of ligands have a momentous effect on the [Mo8O26]4 - structures of this series. In addition, the adsorption and photocatalytic properties of organic dyes for compounds 1–4 have been investigated.

Advances in the Application of Nanocatalysts in Photocatalytic Processes for the Treatment of Food Dyes: A Review

The use of food additives (such as dyes, which improve the appearance of the products) has become more prominent, due to the rapid population growth and the increase in demand for beverages and processed foods. The dyes are usually found in effluents that are discharged into the environment without previous treatment; this promotes mass contamination and alters the aquatic environment. In recent years, advanced oxidation processes (AOPs) have proven to be effective technologies used for wastewater treatment through the destruction of the total organic content of toxic contaminants, including food dyes. Studies have shown that the introduction of catalysts in AOPs improve treatment efficiency (i.e., complete decomposition without secondary contamination). The present review offers a quick reference for researchers, regarding the treatment of wastewater containing food dyes and the different types of AOPs, with different catalyst and nanocatalyst materials obtained from traditional and green chemical syntheses.

Heterometal-Organic Cages as Photo-Fenton-like Catalysts

Metal-organic cages, a class of supramolecular containers constructed by the self-assembly of metal ions and organic ligands, show great promise as catalytic agents. In this work, we designed and synthesized a series of rhombic dodecahedral Ni-Cu heterometal imidazolate cages (Ni₈Cu₆L₂₄) that can act as highly active photo-Fenton-like catalysts. These cages possess a high ability to generate hydroxyl radicals (^•OH) under visible light in the presence of H₂O₂, which can rapidly degrade organic pollutants (e.g., rhodamine B, methylene blue, and methyl orange) into CO₂ and H₂O. Besides, they are robust catalysts, with high catalytic activity and reusability under conditions in high H₂O₂ concentration, providing potentially advanced materials for degrading persistent organic pollutants.

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media

In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H₂fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

Investigation of the influence of TiO2distribution on HA/TiO2composite wetting ability using the dispersant SDBS, high-temperature annealing, and ultrasonication

The use of composites such as hydroxyapatite (HA)/TiO₂in bioapplications has attracted increasing attention in recent years. Herein, for the enhancement wetting ability and biocompatibility, the HA/TiO₂composite was subjected to different treatments to improve nanoparticle (NP) distribution and surface energy with an aim of mitigating nanotoxicity concerns. The treatments included ultrasonication, high-temperature annealing, and addition of a dispersant and surfactant, sodium dodecylbenzenesulfonate (SDBS). Contact angle measurement tests revealed the effect of SDBS addition on the distribution of TiO₂NPs on the HA surface: a decrease in the contact angle and, thus, an increase in the wetting ability of the HA/TiO₂composite were observed. The combination of annealing and SDBS addition treatments allowed for guest TiO₂particles to be uniformly distributed on the surface of the host HA particles, showing a rapid conversion from a hydrophobic to superhydrophilic property.In vitroinvestigation suggested that the cell viabilities of annealed HA/TiO₂, SDBS-added HA/TiO₂, and SDBS-added and annealed HA/TiO₂reached 89.7%, 94.7%, and 95.8%, respectively, while those of HA and untreated HA/TiO₂were 80.3% and 86.9%, respectively. The modified composites exhibited lower cytotoxicities than the unmodified systems (HA and HA/TiO₂). Furthermore, the cell adhesion behavior of the composites was confirmed through actin-4',6-Diamidino-2-phenylindole (DAPI) staining, which showed negligible changes in the cytoskeleton architecture of the cells. This study confirmed that a modified HA/TiO₂composite has potential for bioapplications.

A photosensitive metal-organic framework having a flower-like structure for effective visible light-driven photodegradation of rhodamine B

Porphyrin-based metal–organic frameworks (MOFs) have great photocatalytic potential due to their good photosensitivity. Their photocatalytic performance is not only determined by molecular structure but also by morphology. Flower-like MOFs are considered to be good materials for catalysis due to their larger specific surface area, more exposed active sites, and good stability. Here, we first proposed a method to synthesize flower-like porphyrin-based MOFs using trifluoroacetic acid as a morphology control agent. These MOFs had a large BET surface area (605.04 m² g⁻¹), a stable structure and a complete morphology. Meanwhile, we discussed their self-assembly process and mechanism in detail. In addition, we studied the photocatalytic performance of flower-like porphyrin-based MOFs and found that the flower-like Cu-TCPP (TCPP = tetrakis(4-carboxyphenyl)porphyrin) has excellent photocatalytic activity. Its photodegradation efficiency toward the cationic dye rhodamine B reached 88% within 100 min and the sample still maintained its stable catalytic activity and complete flower-like morphological structure after five repeated uses. Furthermore, this synthetic strategy can be extended to control the morphology of other MOFs.

Using the method of adding morphological control agent-trifluoroacetic acid (TFA), a flower-like porphyrin-based metal organic framework can be prepared, which shows a good effect on the photocatalytic degradation of rhodamine B.

Ultrathin 2D Copper(I) 1,2,4-Triazolate Coordination Polymer Nanosheets for Efficient and Selective Gene Silencing and Photodynamic Therapy

Gene silencing holds promise for cancer therapeutics because of its potential to inhibit genes involved in tumor development. However, gene silencing is still restricted by its limited efficacy and safety. Nanoscale coordination polymers (CPs) emerge as promising nanocarriers for gene delivery, but their responsiveness and potential therapeutic properties have rarely been explored simultaneously. Here, multifunctional ultrathin 2D nanosheets of Cu(I) 1,2,4-triazolate CP with a thickness of 4.5 ± 0.8 nm are synthesized using a bottom-up method. These CP nanosheets can act as both an effective DNAzyme nanocarrier for gene therapy and an intrinsic photosensitizer for hypoxia-tolerant type I photodynamic therapy (PDT), which is ascribed to the Fenton-like reaction. Because of the glutathione (GSH)-responsiveness of the CP nanosheets, DNAzyme-loaded CP nanosheets exhibit excellent cancer-cell-targeting gene silencing of the early growth response factor-1 (EGR-1), with messenger RNA inhibited by 84% in MCF-7 (human breast cancer cells) and only 6% in MCF-10A (normal human mammary epithelial cells). After tail intravenous injection into MCF-7-tumor-bearing mice, the CP nanosheets loaded with chlorin-e6-modified DNAzyme under photoirradiation show a high antitumor efficacy (88.0% tumor regression), demonstrating a promising therapeutic platform with efficient and selective gene silencing and PDT of cancer.

Copper mixed-triazolate frameworks featuring the thiophene-containing ligand towards enhanced photodegradation of organic contaminants in water

By using a thiophene-containing triazole ligand -3,5-di(thiophen-2-yl)-1H-1,2,4-triazole (3,5-Th₂-tzH) and 3,5-diphenyl-1H-1,2,4-triazole (3,5-Ph₂-tzH) in different molar ratio in the reactant, copper(I) mixed-triazolate frameworks CuMtz-1 {[Cu₈(3,5-Ph₂-tz)_6-x(3,5-Th₂-tz)_x](BF₄)₂(CH₃OH)₃} (x = 0.5 for CuMtz-1a and 1.1 for CuMtz-1b) were firstly synthesized and characterized by PXRD, IR, ¹H NMR, SEM, TG and UV-vis DRS. They have been evaluated as photocatalysts for the degradation of organic pollutants in water. It was found that the rate constants towards the degradation of both traditional and emerging organic contaminants over CuMtz-1b were significantly improved, i.e. by 160% for methyl orange, 210% for rhodamine B, 80% for methyl blue and 180% for sulfasalazine in comparison with that catalyzed over the parent MOF CuTz-1 {[Cu₈(3,5-Ph₂-tz)₆](BF₄)₂(CH₃OH)₃} under Xe lamp irradiation in the absence of H₂O₂. More importantly, the degradation efficiency of methyl orange and sulfasalazine by CuMtz-1b without the addition of H₂O₂ was quite comparable with that by CuTz-1 with the addition of H₂O₂ under both Xe lamp irradiation and natural sunlight. The enhancement on the degradation efficiency can be attributed to the increased light absorption ability and the change of the band structure caused by the incorporation of thiophene-containing triazole ligand.

Encapsulated anion-dominated photocatalytic and adsorption performances for organic dye degradation and oxoanion pollutant capture over cationic Cu(i)-organic framework semiconductors

Decontamination of industrial wastewater containing toxic organic dye molecules and oxoanions is urgently desirable for environmental sustainability and human health. Water-stable porous metal-organic frameworks (MOFs) have emerged as highly efficient photocatalysts and/or adsorbents for water purification through controllable integration of the constitutive requirements. To reveal the inclusion anion effect of microporous MOFs on wastewater treatment, two isostructural MOFs incorporating positive charge and semiconductive characteristics, {[Cu(tpt)]·3H₂O·0.5SO₄}_n (1) and {[Cu(tpt)]·2H₂O·ClO₄}_n (2, tpt = 2,4,6-tris(4-pyridyl)-1,3,5-triazine), have been synthesized and employed as dual-functional materials for both dye photodegradation and oxoanion removal. The two MOFs possess the same 3-fold interpenetrating cationic backbones but are encapsulated by highly disordered sulfate or perchlorate in the open channels. These included anions have significantly tuned the hydrophilicity of the channels, extended the visible-light absorption, optimized the bandgap and decreased the conduction band potential. Under the low-energy irradiation of a 30 W LED lamp, MOF 1 has selectively and efficiently degraded rhodamine B compared to 2 with accelerated kinetics, resulting from the stronger reduction ability and less migration resistance of the photogenerated electrons. Instead, MOF 2 can quickly capture harmful MnO₄^- and Cr₂O₇^2- by exchanging with the entrapped ClO₄^-, with maximum adsorption amounts of 557 and 168 mg g^-1, respectively, under ambient conditions. The improved decolorization of the aqueous solution over 2 benefits essentially from the shape and charge memory effect and the smaller hydration energy of ClO₄^- than SO₄^2-. These interesting observations highlight the importance of the included anions inside the porous MOF semiconductors on wastewater treatment.

Syntheses, design strategies, and photocatalytic charge dynamics of metal–organic frameworks (MOFs): a catalyzed photo-degradation approach towards organic dyes

The presented review focuses on design strategies to develop tailor-made MOFs/CPs of main group, transition and inner-transition elements and their photocatalytic properties to decompose dyes in wastewater discharge and their photocatalytic mechanism.

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

Template syntheses of diverse haloargentates with reversible photochromism behaviors and efficient photocatalytic properties

A series of haloargentates have been prepared exhibiting a reversible photochromic phenomenon and efficient photocatalytic properties.

Anion-Dominated Copper Salicyaldimine Complexes-Structures, Coordination Mode of Nitrate and Decolorization Properties toward Acid Orange 7 Dye

A salicyaldimine ligand, 3-tert-butyl-4-hydroxy-5-(((pyridin-2-ylmethyl)imino)methyl)benzoic acid (H₂L_salpyca) and two Cu(II)−salicylaldimine complexes, [Cu(HL_salpyca)Cl] (1) and [Cu(HL_salpyca)(NO₃)]_n (2), have been synthesized. Complex 1 has a discrete mononuclear structure, in which the Cu(II) center is in a distorted square-planar geometry made up of one HL_salpyca⁻ monoanion in an NNO tris-chelating mode and one Cl⁻ anion. Complex 2 adopts a neutral one-dimensional zigzag chain structure propagating along the crystallographic [010] direction, where the Cu(II) center suits a distorted square pyramidal geometry with a τ value of 0.134, consisted of one HL_salpyca⁻ monoanion as an NNO tris-chelator and two NO₃⁻ anions. When the Cu∙∙∙O semi coordination is taken into consideration, the nitrato ligand bridges two Cu(II) centers in an unsymmetrical bridging-tridentate with a μ, κ⁴O,O′:O′,O″ coordination. Clearly, anion herein plays a critical role in dominating the formation of discrete and polymeric structures of copper salicyaldimine complexes. Noteworthy, complex 2 is insoluble but highly stable in H₂O and various organic solvents (CH₃OH, CH₃CN, acetone, CH₂Cl₂ and THF). Moreover, complex 2 shows good photocatalytic degradation activity and recyclability to accelerate the decolorization rate and enhance the decolorization performance of acid orange 7 (AO7) dye by hydrogen peroxide (H₂O₂) under daylight.

Recent advances in Cu-Fenton systems for the treatment of industrial wastewaters: Role of Cu complexes and Cu composites

Cu-based Fenton systems have been recognized as a promising suite of technologies for the treatment of industrial wastewaters due to their high catalytic oxidation capacity. Rapid progress regarding Cu Fenton systems has been made not only in fundamental mechanistic aspects of these systems but also with regard to applications over the past decade. Based on available literature, this review synthesizes the recent advances regarding both the understanding and applications of Cu-based Fenton processes for industrial wastewater treatment. Cu-based catalysts that are essential to the effectiveness of use of Cu Fenton reactions for oxidation of target species are mainly classified into two types: (i) Cu complexes with organic or inorganic ligands, and (ii) Cu composites with inorganic materials. Performance of the Cu-based catalysts for the removal of organic pollutants in industrial wastewaters are reviewed, with the key operating parameters illustrated. Furthermore, the roles of Cu complexes and composites in both homogeneous and heterogeneous Cu-Fenton systems are critically examined with particular focus on the mechanisms involved. Perspectives and future efforts needed for Cu-based Fenton systems using Cu complexes and composites for industrial wastewater treatment are presented.

Synthesis of a novel 2D zinc(ii) metal-organic framework for photocatalytic degradation of organic dyes in water

A novel 2D zinc(ii) metal-organic framework, formulated as [Zn(L)(H2O)]·H2O (1) (H2L = 4-(pyridine-4-yl) phthalic acid), has been successfully obtained under solvothermal conditions. This metal-organic framework (MOF) material exhibits efficient photocatalytic activity towards the degradation of organic dyes in the absence of any photosensitizer or cocatalyst. Its catalytic performance for rhodamine B (RhB) and methyl orange (MO) degradation was superior to most reported MOFs with a degradation efficiency of 98.5% for RhB and 83.8% for MO within 120 min in the absence of H2O2, which could be attributed to its high efficiency in generating ·O2- (an effective oxidant for the degradation of dyes). The possible mechanism of the reaction was discussed in detail. In addition, 1 shows stable catalytic efficiency after five reaction cycles, which indicates that 1 exhibits efficient catalytic activity and good reusability toward the degradation of organic dyes, enabling it to be a potential candidate for environmental governance.

Monodispersed Copper(I)-Based Nano Metal-Organic Framework as a Biodegradable Drug Carrier with Enhanced Photodynamic Therapy Efficacy

Photodynamic therapy (PDT) has emerged as an alternative treatment of cancers. However, the therapeutic efficiency of PDT is severely limited by the microenvironment of insufficient oxygen (O2) supply and overexpression of glutathione (GSH) in the tumor. Herein, a biodegradable O2-loaded CuTz-1@F127 (denoted as CuTz-1-O2@F127) metal-organic framework (MOF) therapeutic platform is presented for enhanced PDT by simultaneously overcoming intracellular hypoxia and reducing GSH levels in the tumor. The Cu(I)-based MOF is capable of a Fenton-like reaction to generate •OH and O2 in the presence of H2O2 under NIR irradiation. Meanwhile, the CuTz-1-O2@F127 nanoparticles (NPs) can release adsorbed O2, which further alleviates intracellular hypoxia. In addition, the CuI in CuTz-1@F127 can react with intracellular GSH to reduce the excess GSH. In this way, the efficiency of PDT is greatly enhanced. After tail intravenous injection, the NPs show high antitumor efficacy through a synergistic effect under 808 nm laser irradiation. More importantly, the NPs are biodegradable. In vivo biodistribution and excretion experiments demonstrate that a total of nearly 90% of the NPs can be excreted via feces and urine within 30 d, which indicates significant prospects in the clinical treatment of cancers.