Self-Assembly Propensity Dictates Lifetimes in Transient Naphthalimide-Dipeptide Nanofibers

Self-assembly of heterochiral, aliphatic dipeptides with Leu

This work describes the self-assembly behavior of heterochiral, aliphatic dipeptides, l-Leu-d-Xaa (Xaa = Ala, Val, Ile, Leu), in green solvents such as acetonitrile (MeCN) and buffered water at neutral pH. Interestingly, water plays a structuring role because at 1% v/v, it enables dipeptide self-assembly in MeCN to yield organogels, which then undergo transition towards crystals. Other organic solvents and oils were tested for gelation, and metastable gels were formed in tetrahydrofuran, although at high peptide concentration (80 mM). Single-crystal X-ray diffraction revealed the dipeptides' supramolecular packing modes in amphipathic layers, as opposed to water channels reported for the homochiral Leu-Leu, or hydrophobic columns reported for homochiral Leu-Val and Leu-Ile.

Bio-Inspired Far-From-Equilibrium Hydrogels: Design Principles and Applications

Inspired from dynamic living systems that operate under out-of-equilibrium conditions in biology, developing supramolecular hydrogels with self-regulating and autonomously dynamic properties to further advance adaptive hydrogels with life-like behavior is important. This review presents recent progress of bio-inspired supramolecular hydrogels out-of-equilibrium. The principle of out-of-equilibrium self-assembly for creating bio-inspired hydrogels is discussed. Various design strategies have been identified, such as chemical-driven reaction cycles with feedback control and physically oscillatory systems. These strategies can be coupled with hydrogels to achieve temporal and spatial control over structural and mechanical properties as well as programmable lifetime. These studies open up huge opportunities for potential applications, such as fluidic guidance, information storage, drug delivery, actuators and more. Finally, we address the challenges ahead of us in the coming years, and future possibilities and prospects are identified.

Localized and regulated peptide pigment formation inside liquid droplets through confined enzymatic oxidation

Melanin pigments are found in most life forms, where they are responsible for coloration and ultraviolet (UV) light protection. Natural melanin is a poorly soluble and complex biosynthesis product produced through confined and templated enzymatic oxidation of tyrosine. It has been challenging to create water-soluble synthetic mimics. This study demonstrates the enzymatic synthesis of oxidized phenols confined inside liquid droplets. We use an amphiphilic, bifunctional peptide, DYFR9, that combines a tyrosine tripeptide previously shown to undergo enzymatic oxidation to form peptide pigments with broad absorbance, and polyarginine to facilitate complex coacervation in the presence of ATP. When ATP, DYFR9 are mixed and exposed to tyrosinase, pigmented liquid droplets result, while no appreciable oxidation is observed in the bulk.

Caught in Action: Visualizing Dynamic Nanostructures Within Supramolecular Systems Chemistry

Supramolecular systems chemistry has been an area of active research to develop nanomaterials with life-like functions. Progress in systems chemistry relies on our ability to probe the nanostructure formation in solution. Often visualizing the dynamics of nanostructures which transform over time is a formidable challenge. This necessitates a paradigm shift from dry sample imaging towards solution-based techniques. We review the application of state-of-the-art techniques for real-time, in situ visualization of dynamic self-assembly processes. We present how solution-based techniques namely optical super-resolution microscopy, solution-state atomic force microscopy, liquid-phase transmission electron microscopy, molecular dynamics simulations and other emerging techniques are revolutionizing our understanding of active and adaptive nanomaterials with life-like functions. This Review provides the visualization toolbox and futuristic vision to tap the potential of dynamic nanomaterials.

Temporally Controlled Multienzyme Catalysis Using a Dissipative Supramolecular Nanozyme

The development of superior functional enzyme mimics (nanozymes) is essential for practical applications, including point-of-care diagnostics, biotechnological applications, biofuels, and environmental remediation. Nanozymes with the ability to control their catalytic activity in response to external fuels offer functionally valuable platforms mimicking nonequilibrium systems in nature. Herein, we fabricated a supramolecular coordination bonding-based dynamic vesicle that exhibits multienzymatic activity. The supramolecular nanozyme shows effective laccase-like catalytic activity with a K_M value better than the native enzyme and higher stability in harsh conditions. Besides, the nanostructure demonstrates an efficient peroxidase-like activity with NADH peroxidase-like properties. Generation of luminescence from luminol and oxidation of dopamine are efficiently catalyzed by the nanozyme with high sensitivity, which is useful for point-of-care detections. Notably, the active nanozyme exhibits dynamic laccase-mimetic activity in response to pH variation, which has never been explored before. While a neutral/high pH leads to the self-assembly, a low pH disintegrates the assembled nanostructures and consequently turns off the nanozyme activity. Altogether, the self-assembled Cu²⁺-based vesicular nanostructure presents a pH-fueled dissipative system demonstrating effective temporally controlled multienzymatic activity.

Sequence-Dependent Tyrosine-Containing Peptide Nanoassemblies for Sensing Tyrosinase and Melanoma

Tyrosine-containing peptide nanoassemblies have received tremendous attention because of their potential applications in biomedicine and nanomaterial fields. However, a current outstanding challenge is to direct the equilibrium between oxidative polymerization of precursors and the noncovalent assembly to precisely tune their specific nanostructures and functionalities through the rational design of peptide sequences. With a simple library of tripeptides containing tyrosine, glycine, and lysine, here we demonstrate how amino acid sequence encodes the property of tripeptide nanoassemblies by modulating the enzymatic oxidation of tyrosinase with the accompanied self-assembly, and thus select the pathways toward fluorescent or melanin-like nanoassemblies. The fluorescence of tripeptide nanoassemblies has been demonstrated in sensing both tyrosinase and melanoma. Our findings will provide inspiration of peptide sequence design for generating the complex bioactive peptide nanomaterials for biomedical applications.

A new aggregation induced emission enhancement (AIEE) dye which self-assembles to panchromatic fluorescent flowers and has application in sensing dichromate ions

We report for the very first time the crystal structure and self-assembly of a new aggregation-induced emission enhancement (AIEE) dye 4-(5-methoxythiazolo[4,5-b]pyridin-2-yl)-N,N-dimethylaniline (TPA) and its application in sensing dichromate ions. TPA reveals cyan blue emission under UV and visible light. The self-assembly properties of TPA were studied extensively by scanning electron microscopy (SEM) which revealed the formation of beautiful flower-like morphologies. These structures revealed both green and red fluorescence under FITC and rhodamine filters respectively when observed through fluorescence microscopy connoting the panchromatic emission properties of TPA from blue to red. The interactions which cause self-assembled structure formation in TPA were also validated theoretically using density functional theory (DFT) calculations. Crystal and molecular structure analysis of TPA was carried out via single-crystal X-ray diffraction to visualize the intermolecular interactions occurring in the solid-state and to study the structure-photophysical property relationship in the aggregated state. The photophysical properties of TPA were also studied extensively by UV-visible and fluorescence spectroscopy and its quantum yield and fluorescence lifetime were calculated by time-correlated single-photon counting (TCSPC). Interestingly, TPA could efficiently sense dichromate (Cr₂O₇^2-) ions in an acidic medium and an interesting morphological transition from a fluorescent flower to non-fluorescent disassembled structures could also be observed. The limit of detection of TPA for Cr₂O₇^2- ions was found to be as low as 5.5 nM, suggesting its exceptional sensitivity. More importantly, TPA could selectively sense Cr₂O₇^2- ions in real water samples even in the presence of other metal ions routinely present in polluted water, hence making it practically useful for water quality monitoring.

Construction of Supramolecular Systems That Achieve Lifelike Functions

The Nobel Prize in Chemistry was awarded in 1987 and 2016 for research in supramolecular chemistry on the “development and use of molecules with structure-specific interactions of high selectivity” and the “design and production of molecular machines”, respectively. This confirmed the explosive development of supramolecular chemistry. In addition, attempts have been made in systems chemistry to embody the complex functions of living organisms as artificial non-equilibrium chemical systems, which have not received much attention in supramolecular chemistry. In this review, we explain recent developments in supramolecular chemistry through four categories: stimuli-responsiveness, time evolution, dissipative self-assembly, and hierarchical expression of functions. We discuss the development of non-equilibrium supramolecular systems, including the use of molecules with precisely designed properties, to achieve functions found in life as a hierarchical chemical system.

Using Rheology to Understand Transient and Dynamic Gels

Supramolecular gels can be designed such that pre-determined changes in state occur. For example, systems that go from a solution (sol) state to a gel state and then back to a sol state can be prepared using chemical processes to control the onset and duration of each change of state. Based on this, more complex systems such as gel-to-sol-to-gel and gel-to-gel-to-gel systems can be designed. Here, we show that we can provide additional insights into such systems by using rheological measurements at varying values of frequency or strain during the evolution of the systems. Since the different states are affected to different degrees by the frequency and/or strain applied, this allows us to better understand and follow the changes in state in such systems.

Hierarchical self-assembly of aromatic peptide conjugates into supramolecular polymers: it takes two to tango

Supramolecular polymers are self-assembled materials displaying adaptive and responsive "life-like" behaviour which are often made of aromatic compounds capable of engaging in π-π interactions to form larger assemblies. Major advances have been made recently in controlling their mode of self-assembly, from thermodynamically-controlled isodesmic to kinetically-controlled living polymerization. Dynamic covalent chemistry has been recently implemented to generate dynamic covalent polymers which can be seen as dynamic analogues of biomacromolecules. On the other hand, peptides are readily-available and structurally-rich building blocks that can lead to secondary structures or specific functions. In this context, the past decade has seen intense research activity in studying the behaviour of aromatic-peptide conjugates through supramolecular and/or dynamic covalent chemistries. Herein, we review those impressive key achievements showcasing how aromatic- and peptide-based self-assemblies can be combined using dynamic covalent and/or supramolecular chemistry, and what it brings in terms of the structure, self-assembly pathways, and function of supramolecular and dynamic covalent polymers.

Sonication-Induced, Solvent-Selective Gelation of a 1,8-Napthalimide-Conjugated Amide: Structural Insights and Pollutant Removal Applications

Reported herein is the synthesis, characterization, and dye removal applications of a highly solvent-selective organogel-forming amide, compound 1, which contains a 1,8-naphthalmide moiety, flexible n-hexyl chain, and benzene ring. This compound displayed remarkable solvent selectivity, with gel formation occurring only in the presence of alkylated aromatic solvents. Detailed structural characterization of the gels, combined with notable theoretical insights, is invoked to explain the highly selective gelation properties of compound 1, as is a comparison to non-gel forming structural isomer 2, which contains the same structural elements in a different arrangement. Finally, the ability of the gel derived from compound 1 to act as a reusable material for the efficient removal of cationic organic dyes from contaminated aqueous environments is also reported, with up to 11 repeated uses of the gel still maintaining the ability to effectively remove Rhodamine B.

Peptide-Based Supramolecular Systems Chemistry

Peptide-based supramolecular systems chemistry seeks to mimic the ability of life forms to use conserved sets of building blocks and chemical reactions to achieve a bewildering array of functions. Building on the design principles for short peptide-based nanomaterials with properties, such as self-assembly, recognition, catalysis, and actuation, are increasingly available. Peptide-based supramolecular systems chemistry is starting to address the far greater challenge of systems-level design to access complex functions that emerge when multiple reactions and interactions are coordinated and integrated. We discuss key features relevant to systems-level design, including regulating supramolecular order and disorder, development of active and adaptive systems by considering kinetic and thermodynamic design aspects and combinatorial dynamic covalent and noncovalent interactions. Finally, we discuss how structural and dynamic design concepts, including preorganization and induced fit, are critical to the ability to develop adaptive materials with adaptive and tunable photonic, electronic, and catalytic properties. Finally, we highlight examples where multiple features are combined, resulting in chemical systems and materials that display adaptive properties that cannot be achieved without this level of integration.

Diketopiperazine Gels: New Horizons from the Self-Assembly of Cyclic Dipeptides

Cyclodipeptides (CDPs) or 2,5-diketopiperazines (DKPs) can exert a variety of biological activities and display pronounced resistance against enzymatic hydrolysis as well as a propensity towards self-assembly into gels, relative to the linear-dipeptide counterparts. They have attracted great interest in a variety of fields spanning from functional materials to drug discovery. This concise review will analyze the latest advancements in their synthesis, self-assembly into gels, and their more innovative applications.

Active Bicomponent Nanoparticle Assembly with Temporal, Microstructural, and Functional Control

Transient supramolecular self-assembly has evolved as a tool to create temporally programmable smart materials. Yet, so far single-component self-assembly has been mostly explored. In contrast, multicomponent self-assembly provides an opportunity to create unique nanostructures exhibiting complex functional outcomes, newer and different than individual components. Even two-component can result in multiple organizations, such as self-sorted domains or co-assembled heterostructures, can occur, thus making it highly complex to predict and reversibly modulate these microstructures. In this study, we attempted to create active bicomponent nanoparticle assemblies of orthogonally pH-responsive-group-functionalized gold and cadmium selenide nanoparticles with temporal microstructural control on their composition (self-sorted or co-assembly) in order to harvest their emergent transient photocatalytic activity by coupling to temporal changes in pH. Moving towards multicomponent systems can deliver next level control in terms of structural and functional outcomes of supramolecular systems.

In Situ, Noncovalent Labeling and Stimulated Emission Depletion-Based Super-Resolution Imaging of Supramolecular Peptide Nanostructures

Supramolecular materials have gained substantial interest for a number biological and nonbiological applications. However, for optimum utilization of these dynamic self-assembled materials, it is important to visualize and understand their structures at the nanoscale, in solution and in real time. Previous approaches for imaging these structures have utilized super-resolution optical imaging methods such as STORM, which has provided important insights, but suffers from drawbacks of complex sample preparation and slow acquisition times, thus limiting real-time in situ imaging of dynamic processes. We demonstrate a noncovalent fluorescent labeling design for STED-based super-resolution imaging of self-assembling peptides. This is achieved by in situ, electrostatic binding of anionic sulfonates of Alexa-488 dye to the cationic sites of lysine (or arginine) residues exposed on the peptide nanostructure surface. A direct, multiscale visualization of static structures reveals hierarchical organization of supramolecular fibers with sub-60 nm resolution. In addition, the degradation of nanofibers upon enzymatic hydrolysis of peptide could be directly imaged in real time, and although resolution was compromised in this dynamic process, it provided mechanistic insights into the enzymatic degradation process. Noncovalent Alexa-488 labeling and subsequent imaging of a range of cationic self-assembling peptides and peptide-functionalized gold nanoparticles demonstrated the versatility of the methodology for the imaging of cationic supramolecular structures. Overall, our approach presents a general and simple method for the electrostatic fluorescent labeling of cationic peptide nanostructures for nanoscale imaging under physiological conditions and probe dynamic processes in real time and in situ.