How to Build Prussian Blue Based Water Oxidation Catalytic Assemblies: Common Trends and Strategies

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

Electrochemically driven physical properties of solid-state materials: action mechanisms and control schemes

The various physical properties recently induced by solid-state electrochemical reactions must be comprehensively understood, and their mechanisms of action should be elucidated. Reversible changes in conductivity, magnetism, and colour have been achieved by combining the redox reactions of d metal ions and organic materials, as well as the molecular and crystal structures of solids. This review describes the electrochemically driven physical properties of conductors, magnetic materials, and electrochromic materials using various electrochemical devices.

Prussian Blue Analogue Glasses for Photoinduced CO2 Conversion

Crystal-to-glass transformation is a powerful approach to modulating the chemical and physical properties of crystals. Here we demonstrate that the glass transformation of cobalt hexacyanoferrate crystals, one of the Prussian blue analogues, increased the concentration of open metal sites and altered the electronic state while maintaining coordination geometries and short-range ordering in the structure. The compositional and structural changes were characterized by X-ray absorption fine structure, energy dispersive X-ray spectroscopy, and X-ray total scattering. The changes contribute to the flat band potential of the glass becoming closer to the redox potential of CO2 reduction. The valence band energy of the glass also shifts, resulting in lower band gap energy. Both the increased open metal sites and the optimal electronic structure upon vitrification enhance photocatalytic activity toward CO2-to-CO conversions (9.9 μmol h-1 CO production) and selectivity (72.4%) in comparison with the crystalline counterpart (3.9 μmol h-1 and 42.8%).

Ni-Co hexacyanoferrate hollow nanoprism with CN vacancy for electrocatalytic benzyl alcohol oxidation

An innovative method to improve the oxidation efficiency of benzyl alcohol utilizes Ni-Co hexacyanoferrate hollow nanoprisms. Synthesized via a gentle self-sacrificial template method, this catalyst exhibits substantial catalytic activity and selectivity towards benzyl alcohol oxidation, facilitated by the strategic incorporation of Co to modulate CN vacancy density. Impressively, it achieves a current density of 10 mA cm-2 at 1.33 V and a remarkable 98% efficiency in benzyl alcohol conversion at 1.4 V.

Tunable Photocatalytic Activity of CoFe Prussian Blue Analogue Modified SrTiO3 Core-Shell Structures for Solar-Driven Water Oxidation

This study presents a pioneering semiconductor-catalyst core-shell architecture designed to enhance photocatalytic water oxidation activity significantly. This innovative assembly involves the in situ deposition of CoFe Prussian blue analogue (PBA) particles onto SrTiO3 (STO) and blue SrTiO3 (bSTO) nanocubes, effectively establishing a robust p-n junction, as demonstrated by Mott-Schottky analysis. Of notable significance, the STO/PB core-shell catalyst displayed remarkable photocatalytic performance, achieving an oxygen evolution rate of 129.6 μmol g-1 h-1, with stability over an extended 9-h in the presence of S2O82- as an electron scavenger. Thorough characterization unequivocally verified the precise alignment of the band energies within the STO/PB core-shell assembly. Our research underscores the critical role of tailored semiconductor-catalyst interfaces in advancing the realm of photocatalysis and its broader applications in renewable energy technologies.

Rational design of an acceptor-chromophore-relay-catalyst tetrad assembly for water oxidation

We report the step-by-step synthesis of a precious metal-free acceptor-chromophore-relay-catalyst tetrad assembly that exhibits a turnover frequency (TOF) of 7.5 × 10-3 s-1 under neutral conditions. Transient absorption spectroscopic studies indicate that upon fullerenol incorporation into the investigated complexes, charge separation efficiency increases considerably.

Unidirectional Current in Layered Metal Hexacyanometallate Thin Films: Implication for Alternative Wet-Processed Electronic Materials

Rectifying behavior of alternative electronic materials is demonstrated with layered structures of a crystalline coordination network whose mixed ionic and electronic conductivity can be manipulated by switching the redox state of coordinated transition-metal ions. The coordinated transition-metal ions can convey additional functionality such as (redox)catalysis or electrochromism. In order to obtain rectifying behavior and charge trapping, layered films of such materials are explored. Specifically, layered films of iron hexacyanoruthenate (Fe-HCR) and nickel hexacyanoferrate (Ni-HCF) were formed by the combination of different deposition procedures. They comprise electrodeposition during voltammetric cycles for Fe-HCR and Ni-HCF, layer-by-layer deposition of Ni-HCF without redox chemistry, and drop casting of presynthesized Ni-HCF nanoparticles. The obtained materials were structurally characterized by X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy for nanoparticles, and scanning force microscopy (SFM). Voltammetry in 1 mol L-1 KCl and current-voltage curves (I-V curves) recorded between a conductive SFM tip and the back electrode outside of an electrolyte solution demonstrated charge trapping and rectifying behavior based on the different formal potentials of the redox centers in the films.

Manipulating Intermetallic Charge Transfer for Switchable External Stimulus-Enhanced Water Oxidation Electrocatalysis

Electrocatalytic processes involving the oxygen evolution reaction (OER) present a kinetic bottleneck due to the existence of linear-scaling relationships, which bind the energies of the different intermediates in the mechanism limiting optimization. Here, we offer a way to break these scaling relationships and enhance the electrocatalytic activity of a Co-Fe Prussian blue modified electrode in OER by applying external stimuli. Improvements of ≈11 % and ≈57 % were achieved under magnetic field (0.2 T) and light irradiation (100 mW cm-2 ), respectively, when working at fixed overpotential, η=0.6 V at pH 7. The observed enhancements strongly tie in with the intermetallic charge transfer (IMCT) intensity between Fe and Co sites. Density Functional Theory simulations suggest that tuning the IMCT can lead to a change of the OER mechanism to an external stimuli-sensitive spin crossover-based pathway, which opens the way for switchable electrocatalytic devices.

A Dormant Reagent Reaction-Diffusion Method for the Generation of Co-Fe Prussian Blue Analogue Periodic Precipitate Particle Libraries

Liesegang patterns that develop as a result of reaction-diffusion can simultaneously form products with slightly different sizes spatially separated in a single medium. We show here a reaction-diffusion method using a dormant reagent (citrate) for developing Liesegang patterns of cobalt hexacyanoferrate Prussian Blue analog (PBA) particle libraries. This method slows the precipitation reaction and produces different-sized particles in a gel medium at different locations. The gel-embedded particles are still catalytically active. Finally, the applicability of the new method to other PBAs and 2D systems is presented. The method proves promising for obtaining similar inorganic framework libraries with catalytic abilities.

Prussian blue analog with separated active sites to catalyze water driven enhanced catalytic treatments

Chemodynamic therapy (CDT) uses the Fenton or Fenton-like reaction to yield toxic ‧OH following H2O2 → ‧OH for tumoral therapy. Unfortunately, H2O2 is often taken from the limited endogenous supply of H2O2 in cancer cells. A water oxidation CoFe Prussian blue (CFPB) nanoframes is presented to provide sustained, external energy-free self-supply of ‧OH from H2O to process CDT and/or photothermal therapy (PTT). Unexpectedly, the as-prepared CFPB nanocubes with no near-infrared (NIR) absorption is transformed into CFPB nanoframes with NIR absorption due to the increased Fe3+-N ≡ C-Fe2+ composition through the proposed proton-induced metal replacement reactions. Surprisingly, both the CFPB nanocubes and nanoframes provide for the self-supply of O2, H2O2, and ‧OH from H2O, with the nanoframe outperforming in the production of ‧OH. Simulation analysis indicates separated active sites in catalyzation of water oxidation, oxygen reduction, and Fenton-like reactions from CFPB. The liposome-covered CFPB nanoframes prepared for controllable water-driven CDT for male tumoral mice treatments.

Synthesis, crystal structures and semiconducting properties of new hexacyanidometallates

We describe the synthesis, crystal structure and semiconducting properties of a number of hexacyanidometallates with the formula A₂[MFe(CN)₆]·xH₂O (A = Na, K; M = Mg, Ca, Sr and Ba). All crystal structures were studied via single-crystal or powder X-ray diffraction. The unexpectedly low-symmetric structures in these ferrocyanides are described and contrasted with analogous transition-metal compounds which have been reported to be strictly or nearly cubic. The amount of crystal water in the structure for powder samples was determined by the thermogravimetric analysis (TGA), supported by IR and Raman spectroscopy. Electronic-structure calculations of K₂[MgFe(CN)₆] and K₂[CaFe(CN)₆] are compared with experimental UV-Vis measurements. The large band gaps by advanced theory indicate that the smaller experimental band gaps are due to surface effects of impurity states. Mott-Schottky curves of K₂[MgFe(CN)₆], K₂[CaFe(CN)₆] and K₂[BaFe(CN)₆]·3H₂O exhibit positive slopes, which characterizes these compounds as n-type semiconductors.

Hydrogel Polymer-PBA Nanocomposite Thin Film-Based Bifunctional Catalytic Electrode for Water Splitting: The Unique Role of the Polymer Matrix in Enhancing the Electrocatalytic Efficiency

A novel approach to efficient bifunctional catalytic electrodes for water splitting is developed, based on a counterintuitive choice of an insulating hydrogel polymer (chitosan, CS)-Prussian blue analogue (PBA, KCoFe) nanocomposite thin film on nickel foam. The polymer matrix in KCoFe-CS enables the formation of framelike structures of the non-noble metal-based catalyst nanocrystals, in addition to improving their stability. An optimized cycling protocol leads to a substantial enhancement of the electrocatalytic efficiency for oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER), achieving relatively low overpotentials of 272 and 320 mV (@ 10 and 20 mA cm^-2) and 146 mV (@ 10 mA cm^-2), respectively, reduced Tafel slopes, and increased Faradaic efficiencies of 98 and 96%; the overpotentials estimated based on the electrochemically active surface area show similar trends. The polymer encapsulation and the cycling protocol are key to the realization of the desirable combination of enhanced efficiency and stability demonstrated up to 50 h for both OER and HER. Detailed characterizations of the postcycling catalytic electrode show that favorable morphological changes of the polymer matrix with concomitant reduction in the PBA nanocrystal size lead to the enhanced activity. The bifunctional activity of the catalytic electrode is demonstrated by the stable water splitting achieved with a 20 mA cm^-2 current density at 1.55 V. The present study unravels the utility of hydrogel polymer matrices (without the use of binders like Nafion) in realizing sustainable water splitting electrocatalysts with high stability and efficiency, through the combined effect of confining the electrolyte within and favorably modifying the catalyst nanoparticles and the nanocomposite morphology.

Synergistic Effect of FeII and MnII Ions in Cyano-Bridged Heterometallic Coordination Polymers on Catalytic Selectivity of Benzene Oxygenation to Phenol

A cyano-bridged heterometallic coordination polymer with partial deficiencies of CN^- ligands, [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)], forms open metal sites both on Mn^II and Fe^II ions by liberation of monodentate ligands such as NH₃ and H₂O. [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)] exhibits high catalytic activity and selectivity of benzene oxygenation to phenol in the presence of m-chloroperoxybenzoic acid as an oxidant. The postcatalytic spectroscopy of [Mn^II(H₂O)_8/3]_3/2[Fe^II(CN)₅(NH₃)] and catalysis comparison with a physical mixture of [Mn^II(H₂O)₃]₂[Fe^II(CN)₆] and [Fe(H₂O)_3/2]_4/3[Fe(CN)₆], which has open metal sites on both Mn^II and Fe ions separately, indicated that the high activity resulted from high oxidation ability and phenol adsorption ability of Fe^II and Mn^II ions, respectively.

Binder-Free Fabrication of Prussian Blue Analogues Based Electrocatalyst for Enhanced Electrocatalytic Water Oxidation

Developing a cost-effective, efficient, and stable oxygen evolution reaction (OER) catalyst is of great importance for sustainable energy conversion and storage. In this study, we report a facile one-step fabrication of cationic surfactant-assisted Prussian blue analogues (PBAs) M_x[Fe(CN)₅CH₃C₆H₄NH₂]∙yC₁₉H₃₄NBr abbreviated as SF[Fe-Tol-M] (where SF = N-tridecyl-3-methylpyridinium bromide and M = Mn, Co and Ni) as efficient heterogeneous OER electrocatalysts. The electrocatalysts have been characterized by Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) analysis, and X-ray photoelectron spectroscopy (XPS). In the presence of cationic surfactant (SF), PBAs-based electrodes showed enhanced redox current, high surface area and robust stability compared to the recently reported PBAs. SF[Fe-Tol-Co] hybrid catalyst shows superior electrochemical OER activity with a much lower over-potential (610 mV) to attain the current density of 10 mA cm⁻² with the Tafel slope value of 103 mV·dec⁻¹ than that for SF[Fe-Tol-Ni] and SF[Fe-Tol-Mn]. Moreover, the electrochemical impedance spectroscopy (EIS) unveiled that SF[Fe-Tol-Co] exhibits smaller charge transfer resistance, which results in a faster kinetics towards OER. Furthermore, SF[Fe-Tol-Co] offered excellent stability for continues oxygen production over extended reaction time. This work provides a surface assisted facile electrode fabrication approach for developing binder-free OER electrocatalysts for efficient water oxidation.

2D Network overtakes 3D for photocatalytic hydrogen evolution

3-Dimensional (3D) cyanide coordination polymers, typically known as Prussian blue Analogues (PBAs), have received great attention in catalysis due to their stability, easily tuned metal sites, and porosity. However, their high crystallinities and relatively low number of surface-active sites significantly hamper their intrinsic catalytic activities. Herein, we report the utilization of a 2-dimensional (2D) layered cobalt tetracyanonickelate, [Co-Ni], for the reduction of protons to H₂. Relying on its exposed facets, layered morphology, and abundant surface-active sites, [Co-Ni] can efficiently convert water and sunlight to H₂ in the presence of a ruthenium photosensitizer (Ru PS) with an optimal evolution rate of 30 029 ± 590 μmol g^-1 h^-1, greatly exceeding that of 3D Co-Fe PBA [Co-Fe] and Co-Co PBA [Co-Co]. Furthermore, [Co-Ni] retains its structural integrity throughout a 6 hour photocatalytic cycle, which is confirmed by XPS, PXRD, and Infrared analysis. This recent work reveals the excellent morphologic properties that promote [Co-Ni] as an attractive catalyst for the hydrogen evolution reaction (HER).

Enhanced catalytic reduction of p-nitrophenol and azo dyes on copper hexacyanoferrate nanospheres decorated copper foams

Catalytic reduction of nitroaromatic compounds using low-cost non-precious metal containing catalyst remains an essential topic in wastewater treatment. Herein, copper hexacyanoferrate nanospheres decorated copper foams (CF) were prepared by a facile method, and it was used as structured catalysts for the reduction of p-nitrophenol (p-NP) and azo dyes. The catalyst obtained by calcination at 200 °C shows the highest catalytic activity, with an almost complete reduction of p-NP within 3 min with a rate of 2.057 min^-1 at room temperature, and it exhibited excellent reusability in successive 6 cycles. The effects of temperature, initial concentration, pH, and flow rate on p-NP reduction were investigated. Moreover, the mechanistic investigation revealed that fast electron transfer ability and enhanced adsorption for p-NP contributed to its enhanced catalytic performances. This work put forward an efficient approach for the construction of structured catalysts with enhanced performance in catalytic reduction applications.

"Plug and Play" Photosensitizer-Catalyst Dyads for Water Oxidation

We present a simple and easy-to-scale synthetic method to plug common organic photosensitizers into a cyanide-based network structure for the development of photosensitizer-water oxidation catalyst (PS-WOC) dyad assemblies for the photocatalytic water oxidation process. Three photosensitizers, one of which absorbs red light similar to P680 in photosystem II, were utilized to harvest different regions of the solar spectrum. Photosensitizers are covalently coordinated to CoFe Prussian blue structures to prepare PS-WOC dyads. All dyads exhibit steady water oxidation catalytic activities throughout a 6 h photocatalytic experiment. Our results demonstrate that the covalent coordination between the PS and WOC group not only enhances the photocatalytic activity but also improves the robustness of the organic PS group. The photocatalytic activity of "plug and play" dyads relies on several structural and electronic parameters, including the position of the energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of the PS with respect to the HOMO level of the catalytic site, the intensity and wavelength of the absorption band of the PS, and the number of catalytic sites.

Light-Driven Water Oxidation with Ligand-Engineered Prussian Blue Analogues

The elucidation of the ideal coordination environment of a catalytic site has been at the heart of catalytic applications. Herein, we show that the water oxidation activities of catalytic cobalt sites in a Prussian blue (PB) structure could be tuned systematically by decorating its coordination sphere with a combination of cyanide and bidentate pyridyl groups.  K_0.1[Co(bpy)]_2.9[Fe(CN)₆]₂ ([Cobpy–Fe]), K_0.2[Co(phen)]_2.8[Fe(CN)₆]₂ ([Cophen–Fe]), {[Co(bpy)₂]₃[Fe(CN)₆]₂}[Fe(CN)₆]_1/3 ([Cobpy2–Fe]), and {[Co(phen)₂]₃[Fe(CN)₆]₂}[Fe(CN)₆]_1/3 Cl_0.11 ([Cophen2–Fe]) were prepared by introducing bidentate pyridyl groups (phen: 1,10-phenanthroline, bpy: 2,2′-bipyridine) to the common synthetic protocol of Co–Fe Prussian blue analogues. Characterization studies indicate that [Cobpy2–Fe] and [Cophen2–Fe] adopt a pentanuclear molecular structure, while [Cobpy–Fe] and [Cophen–Fe] could be described as cyanide-based coordination polymers with lower-dimensionality and less crystalline nature compared to the regular Co–Fe Prussian blue analogue (PBA), K_0.1Co_2.9[Fe(CN)₆]₂ ([Co–Fe]). Photocatalytic studies reveal that the activities of [Cobpy–Fe] and [Cophen–Fe] are significantly enhanced compared to those of [Co–Fe], while molecular [Cobpy2–Fe] and [Cophen2–Fe] are inactive toward water oxidation. [Cobpy–Fe] and [Cophen–Fe] exhibit upper-bound turnover frequencies (TOFs) of 1.3 and 0.7 s^–1, respectively, which are ∼50 times higher than that of [Co–Fe] (1.8 × 10^–2 s^–1). The complete inactivity of [Cobpy2–Fe] and [Cophen2–Fe] confirms the critical role of aqua coordination to the catalytic cobalt sites for oxygen evolution reaction (OER). Computational studies show that bidentate pyridyl groups enhance the susceptibility of the rate-determining Co(IV)-oxo species to the nucleophilic water attack during the critical O–O bond formation. This study opens a new route toward increasing the intrinsic water oxidation activity of the catalytic sites in PB coordination polymers.

Bidentate pyridyl groups are coordinated to the catalytic cobalt sites in a cyanide-based Co−Fe structure to afford well-tuned extended network structures, which exhibit an outstanding photocatalytic performance compared to the regular Co−Fe PBA.

Selective Photocatalytic CO2 Reduction by Cobalt Dicyanamide

Photocatalytic conversion of CO2 into chemical fuels is a promising approach to tackle carbon emission and global warming. Herein, we promote a cobalt dicyanamide coordination compound, Co-dca, for the first...

Electrodeposited cobalt hexacyanoferrate electrode as a non-enzymatic glucose sensor under neutral conditions

A CoFe Prussian blue analogue (CoFe PB) modified FTO electrode, prepared via a facile electrodeposition method, is investigated as a non-enzymatic glucose sensor under neutral conditions. The electrode exhibits a linear detection of glucose in the 0.1-8.2 mmol/L range with a detection limit of 67 μM, a sensitivity of 18.69 μA/mM.cm², and a fast response time of less than 7 s under neutral conditions. Its stability is confirmed with both electrochemical experiments and characterization studies performed on the pristine and post-mortem electrode. We also conducted a comprehensive electrochemical analysis to elucidate the identity of the active site and the glucose oxidation mechanism on the Prussian blue surface.

Molecular Approach to Alkali-Metal Encapsulation by a Prussian Blue Analogue FeII/CoIII Cube in Aqueous Solution: A Kineticomechanistic Exchange Study

The preparation of a series of alkali-metal inclusion complexes of the molecular cube [{Co^III(Me₃-tacn)}₄{Fe^II(CN)₆}₄]^4- (Me₃-tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane), a mixed-valent Prussian Blue analogue bearing bridging cyanido ligands, has been achieved by following a redox-triggered self-assembly process. The molecular cubes are extremely robust and soluble in aqueous media ranging from 5 M [H⁺] to 2 M [OH^-]. All the complexes have been characterized by the standard mass spectometry, UV-vis, inductively coupled plasma, multinuclear NMR spectroscopy, and electrochemistry. Furthermore, X-ray diffraction analysis of the sodium and lithium salts has also been achieved, and the inclusion of moieties of the form {M-OH₂}⁺ (M = Li, Na) is confirmed. These inclusion complexes in aqueous solution are rather inert to cation exchange and are characterized by a significant decrease in acidity of the confined water molecule due to hydrogen bonding inside the cubic cage. Exchange of the encapsulated cationic {M-OH₂}⁺ or M⁺ units by other alkali metals has also been studied from a kineticomechanistic perspective at different concentrations, temperatures, ionic strengths, and pressures. In all cases, the thermal and pressure activation parameters obtained agree with a process that is dominated by differences in hydration of the cations entering and exiting the cage, although the size of the portal enabling the exchange also plays a determinant role, thus not allowing the large Cs⁺ cation to enter. All the exchange substitutions studied follow a thermodynamic sequence that relates with the size and polarizing capability of the different alkali cations; even so, the process can be reversed, allowing the entry of {Li-OH₂}⁺ units upon adsorption of the cube on an anion exchange resin and subsequent washing with a Li⁺ solution.

Constructing highly active Co sites in Prussian blue analogues for boosting electrocatalytic water oxidation

High-valence cobalt sites are considered as highly active centers for the oxygen evolution reaction (OER) and their corresponding construction is thus of primary importance in the pursuit of outstanding performance. Herein, we report the design and facile synthesis of abundant high-valence cobalt sites by introducing Zn²⁺ into CoFe Prussian blue analogues (PBAs). The modification results in the drastic morphological transformation from a pure phase (CoFe-PBA) to a three-phase composite (CoFeZn-PBA), with a significant increase not only the amount of highly oxidized Co sites but the specific surface area (by up to 4 times). Moreover, the obtained sample also exhibits outstanding electric conductivity. Consequently, an excellent OER performance with an overpotential of 343 mV@10 mA cm^-2 and a Tafel slope of 75 mV dec^-1 was achieved in CoFeZn-PBA, which outperforms the commercial IrO₂ catalyst. Further analysis reveals that CoFeZn-PBA becomes (oxyhydr)oxides after the OER.