Synthesis of Low-Valent Dinuclear Group 14 Compounds with Element-Element Bonds by Transylidation

From a mercury(II) bis(yldiide) complex to actinide yldiides

The bis(yldiide) mercury complex, (L-Hg-L) [L = C(PPh3)P(S)Ph2], is prepared from the corresponding potassium yldiide and used to access the first substituted yldiide actinide complexes [(C5Me5)2An(L)(Cl)] (An = U, Th) via salt metathesis. Compared to previously reported phosphinocarbene complexes, the complexes exhibit long actinide-carbon distances, which can be explained by the strong polarization of the π-electron density toward carbon.

Stabilization of NH- Group Adjacent to Naked Silicon(II) Atom in Base Stabilized Aminosilylenes

Aminosilylene, comprising reactive NH- and Si(II) sites next to each other, is an intriguing class of compounds due to its ability to show diverse reactivity. However, stabilizing the reactive NH- group next to the free Si(II) atom is challenging and has not yet been achieved. Herein, we report the first examples of base stabilized free aminosilylenes Ar*NHSi(PhC(Nt Bu)2 ) (1 a) and Mes*NHSi(PhC(Nt Bu)2 ) (1 b) (Ar*=2,6-dibenzhydryl-4-methylphenyl and Mes*=2,4,6-tri-tert-butylphenyl), tolerating a NH- group next to the naked Si(II) atom. Remarkably, 1 a and 1 b exhibited interesting differences in their reactivity upon heating. With 1 a, an intramolecular C(sp3 )-H activation of one of the benzhydryl methine hydrogen atoms to the Si(II) atom produced the five-membered cyclic silazane 2. However, with 1 b, a rare 1,2-hydrogen shift to the Si(II) atom afforded a silanimine 3, with a hydride ligand attached to an unsaturated silicon atom. Further, the coordination capabilities of 1 a were also tested with Ru(II) and Fe(0) precursors. Treatments of 1 a with [Ru(η6 -p-cymene)Cl2 ]2 led to the isolation of a η6 -arene tethered complex [RuCl2 {Ar*NHSi(PhC(t BuN)2 )-κ1 -Si-η6 -arene}] (4), whereas with the Fe(CO)5 precursor a Fe(0) complex [Fe(CO)4 {Ar*NHSi(PhC(t BuN)2 )-κ1 -Si}] (5) was obtained. Density functional theory (DFT) calculations were conducted to shed light on the structural, bonding, and energetic aspects in 1-5.

Ylide-Substituted Phosphines: A Platform of Strong Donor Ligands for Gold Catalysis and Palladium-Catalyzed Coupling Reactions

The development of homogeneous catalysts is strongly connected to the design of new, sophisticated ligands, which resolve limitations of a given reaction protocol by manipulating the electronic properties of the metal and its spatial environment. Phosphines are a privileged class of ligands that find applications in many catalytic transformations, ranging from hydrogenation reactions to hydroformylation and coupling chemistry. For many years, chemists have been trying to improve the efficiency, selectivity, and application of coupling reactions. The use of highly electron-rich and bulky phosphines was often associated with increased selectivity and efficiency and led to the development of a vast variety of electron-rich alkyl-substituted phosphines. However, this concept of increasing the ligand donor strength reaches its limits with the use of trialkyl-substituted phosphines with tri-tert-butylphosphine thus being one of the most active ligands for many years. In the course of our research efforts to use the special donor strength of ylides to stabilize electron-deficient, low-valent main group compounds, we realized that ylide-substituted phosphine (YPhos) ligands possess remarkably strong donor abilities. Moreover, the YPhos ligands are highly tunable by changing the nature of the groups on the phosphonium, phosphine, or central ylidic carbon atom. We thus obtained a ligand platform with donor capabilities ranging from PCy₃ to even stronger donor abilities than N-heterocyclic carbenes, while being more sterically demanding than simple phosphines as well as many well-known biarylphosphine ligands.These properties led us to explore the applicability of the YPhos ligands in catalysis. In a series of recent reports, our group applied YPhos ligands in gold and palladium catalyzed reactions at catalytic loadings applicable for medium- to large-scale applications. The increased donor strength and unique architecture allowed for remarkable activities in a series of transformations at mild reactions conditions. For gold(I)-catalyzed reactions, we obtained turnover numbers (TONs) for the hydroamination of phenylacetylene with aniline of over 20 000. Also, more complex reactions were easily catalyzed with efficiencies greater than those of other known gold(I) catalysts. Similar efficacies were found in a series of palladium-catalyzed coupling reactions. In Buchwald-Hartwig aminations, unprecedented activities for the amination of aryl chlorides were reached at room temperature. The speed of formation of the catalytically active mono-YPhos palladium species allowed for some of the amination reactions to be completed in only a few minutes. Adjustment of the ligand design enabled the use of a large variety of different aryl and alkyl amines of different steric demands. Furthermore, the YPhos ligands in general showed high activities and selectivity in the coupling of a variety of carbon nucleophiles with aryl chlorides, bromides, and triflates. This enabled the development of efficient reaction protocols for the α-arylation of unhindered ketones and the coupling of Grignard and zinc reagents as well as the first efficient coupling of chloroarenes with alkyllithium compounds. This Account summarizes the recent development of YPhos ligands and their application in gold and palladium catalysis. We also hope to stimulate further use of this ligand platform in catalysis in the future.

Ylide-stabilized phosphenium cations: Impact of the substitution pattern on the coordination chemistry

Although N‐heterocyclic phosphenium (NHP) cations have received considerable research interest due to their application in organocatalysis, including asymmetric synthesis, phosphenium cations with other substitution patterns have hardly been explored. Herein, the preparation of a series of ylide‐substituted cations of type [YPR]⁺ (with Y=Ph₃PC(Ph), R=Ph, Cy or Y) and their structural and coordination properties are reported. Although the diylide‐substituted cation forms spontaneous from the chlorophosphine precursor, the monoylidylphosphenium ions required the addition of a halide‐abstraction reagent. The molecular structures of the cations reflected the different degrees of electron donation from the ylide to the phosphorus center depending on the second substituent. Molecular orbital analysis confirmed the stronger donor properties of the ylide systems compared to NHPs with the mono‐ylide substituted cations featuring a more pronounced electrophilicity. This was mirrored by the reaction of the cations towards gold chloride, in which only the diylide‐substituted cation [Y₂P]⁺ formed the expected LAuCl]⁺ complex, while the monoylide‐substituted compounds reacted to the chlorophosphine ligands by transfer of the chloride from gold to the phosphorus center. These results demonstrate the tunability of ylide‐functionalized phosphorus cations, which should allow for further applications in coordination chemistry in the future.

Accessing Cationic α-Silylated and α-Germylated Phosphorus Ylides

The synthesis and full characterization of α‐silylated (α‐SiCPs; 1–7) and α‐germylated (α‐GeCPs; 11–13) phosphorus ylides bearing one chloride substituent R₃PC(R¹)E(Cl)R²₂ (R=Ph; R¹=Me, Et, Ph; R²=Me, Et, iPr, Mes; E=Si, Ge) is presented. The molecular structures were determined by X‐ray diffraction studies. The title compounds were applied in halide abstraction studies in order to access cationic species. The reaction of Ph₃PC(Me)Si(Cl)Me₂ (1) with Na[B(C₆F₅)₄] furnished the dimeric phosphonium‐like dication [Ph₃PC(Me)SiMe₂]₂[B(C₆F₅)₄]₂ (8). The highly reactive, mesityl‐ or iPr‐substituted cationic species [Ph₃PC(Me)SiMes₂][B(C₆F₅)₄] (9) and [Ph₃PC(Et)SiiPr₂][B(C₆F₅)₄] (10) could be characterized by NMR spectroscopy. Carrying out the halide abstraction reaction in the sterically demanding ether iPr₂O afforded the protonated α‐SiCP [Ph₃PCH(Et)Si(Cl)iPr₂][B(C₆F₅)₄] (6 dec) by sodium‐mediated basic ether decomposition, whereas successfully synthesized [Ph₃PC(Et)SiiPr₂][B(C₆F₅)₄] (10) readily cleaves the F−C bond in fluorobenzene. Thus, the ambiphilic character of α‐SiCPs is clearly demonstrated. The less reactive germanium analogue [Ph₃PC(Me)GeMes₂][B{3,5‐(CF₃)₂C₆H₃}₄] (14) was obtained by treating 11 with Na[B{3,5‐(CF₃)₂C₆H₃}₄] and fully characterized including by X‐ray diffraction analysis. Structural parameters indicate a strong C_Ylide−Ge interaction with high double bond character, and consequently the C−E (E=Si, Ge) bonds in 9, 10 and 14 were analyzed with NBO and AIM methods.

Carbenes and phosphonium ylides: a fruitful association in coordination chemistry

Among a plethora of σ-donor ligands available, carbon-centered ones have become essential, in particular with the emergence of N-heterocyclic carbenes (NHCs), positioning themselves as credible alternatives to traditional nitrogen- and phosphorus-based systems. Phosphonium ylides representing another class of neutral η¹-bonded carbon ligands have also been shown to act as effective Lewis bases. Considering the intrinsic features of the carbene and phosphonium ylide ligands, similar in terms of electronic properties, but different in terms of bonding mode, the design of hybrid systems combining these two types of carbon functionalities appeared to be a natural and exciting challenge. This Perspective comprehensively covers the chemistry of such ligand architectures from synthesis and fundamental aspects to catalytic applications.

Synthesis, Crystal and Electronic Structures of a Thiophosphinoyl- and Amino-Substituted Metallated Ylide

α-Metallated ylides have revealed themselves to be versatile reagents for the introduction of ylide groups. Herein, we report the synthesis of the thiophosphinoyl and piperidyl (Pip) substituted α-metallated ylide [Ph2 (Pip)P=C-P(S)Ph2 ]M (M=Li, Na, K) through a four-step synthetic procedure starting from diphenylmethylphosphine sulfide. Metallation of the ylide intermediate was successfully accomplished with different alkali metal bases delivering the lithium, sodium and potassium salts, the latter isolable in high yields. Structure analyses of the lithium and potassium compounds in the solid state with and without crown ether revealed different aggregates (monomer, dimer and hexamer) with the metals coordinated by the thiophosphoryl moiety and ylidic carbon atom. Although the piperidyl group does not coordinate to the metal, it significantly contributes to the stability of the yldiide by charge delocalization through negative hyperconjugation.

Single‐Site and Cooperative Bond Activation Reactions with Ylide‐Functionalized Tetrylenes: A Computational Study

Due to their transition metal‐like behavior divalent group 14 compounds bear huge potential for their application in bond activation reactions and catalysis. Here we report on detailed computational studies on the use of ylide‐substituted tetrylenes in the activation of dihydrogen and phenol. A series of acyclic and cyclic ylidyltetrylenes featuring various α‐substituents with different σ‐ and π‐donating capabilities have been investigated which demonstrate that particularly π‐accepting boryl groups lead to beneficial properties and low barriers for single‐site activation reactions, above all in the case of silylenes. In contrast, for the thermodynamically more stable germylenes and stannylenes an alternative mechanism involving the active participation of the ylide ligand in the E−H bond (E=H or PhO) activation process by addition across the element carbon linkage was found to be energetically favored. Furthermore, the boryl substituted tetrylenes allowed for a further activation pathway involving the active participation of the boron element bond. These cooperative mechanisms are especially attractive for the heavier cyclic ylidyltetrylenes in which the loss of the protonated ylide group is prevented due to the cyclic framework. Overall, the present studies suggest that cyclic ylide‐substituted germylenes and stannylenes bear huge potential for cooperative bond activations at mild conditions which should be experimentally addressed in the future.

Synthesis of Low-Valent Dinuclear Group 14 Compounds with Element-Element Bonds by Transylidation

Dinuclear low-valent compounds of the heavy main group elements are rare species owing to their intrinsic reactivity. However, they represent desirable target molecules due to their unusual bonding situations as well as applications in bond activations and materials synthesis. The isolation of such compounds usually requires the use of substituents that provide sufficient stability and synthetic access. Herein, we report on the use of strongly donating ylide-substituents to access low-valent dinuclear group 14 compounds. The ylides not only impart steric and electronic stabilization, but also allow facile synthesis via transfer of an ylide from tetrylene precursors of type R Y2 E to ECl2 (E=Ge, Sn; R Y=TolSO2 (PR3 )C with R=Ph, Cy). This method allowed the isolation of dinuclear complexes amongst a germanium analogue of a vinyl cation, [(Ph Y)2 GeGe(Ph Y)]+ with an electronic structure best described as a germylene-stabilized GeII cation and a ylide(chloro)digermene [Cy Y(Cl)GeGe(Cl)Cy Y] with an unusually unsymmetrical structure.