Implant‐abutment emergence angle and profile in relation to peri‐implantitis: A systematic review

Digital workflow for low-cost 3D printed custom healing abutment based on emergence profile CBCT segmentation

Several protocols have been used with computer-aided design and computer-aided manufacture (CAD-CAM) prostheses after image-guided implant surgery based on a prosthetically driven surgical plan. For delayed approaches, a CAD-CAM custom healing abutment can be manufactured before the surgery and installed immediately after implant placement. However, information on the use of emergence profile segmentation on which to base the digital design and on the use of low-cost 3-dimensional printers to produce custom healing abutments are lacking. The purpose of this article was to present a fully digital workflow to digitally design and 3-dimensionally print custom healing abutments with a biocompatible light-polymerizing resin based on the natural emergence profile of the tooth to be replaced.

Monolithic Hybrid Abutment Crowns (Screw-Retained) Versus Monolithic Hybrid Abutments With Monolithic Crowns (Adhesively Cemented): Three-Year Data of a Prospective Clinical Split-Mouth Study

OBJECTIVES

This study compares the restoration of single-tooth implants with screw-retained lithium-disilicate hybrid-abutment crowns and single-tooth lithium-disilicate crowns adhesively bonded to hybrid abutments with regard to objective clinical and subjective patient-specific evaluation criteria over a time of observation of 3 years.

MATERIALS AND METHODS

Two bone-level implants were placed in contralateral sides of the same jaw in 10 patients, each with two single-tooth gaps. After osseointegration, implants were uncovered and an impression was taken. In accordance with the split-mouth design, one implant in each patient was restored with a screw-retained hybrid abutment crown and the other implant with a hybrid abutment and an adhesively bonded single-tooth crown. The restorations were randomly allocated to the implants. Prefabricated titanium bases were used. The ceramic abutments and restorations were fabricated monolithically with pressed lithium-disilicate ceramic. An objective evaluation (survival, technical, or biological complications, FIPS) by the practitioner and a subjective evaluation (satisfaction, OHIP) by the patient were carried out after 3, 6, 12, 24, and 36 months after restoration placement.

RESULTS

Both restoration types showed a survival rate of 100% after 3 years of observation. No technical or biological complications occurred. No significant difference was observed between the two types of restoration neither for objective (survival, technical or biological complications, FIPS) nor subjective (satisfaction, OHIP) evaluation criteria (p > 0.05).

CONCLUSION

No statistically significant differences were observed between screw-retained and cemented pressed lithium-disilicate restorations on bone-level implants for both objective and subjective evaluation criteria, respectively.

CLINICAL SIGNIFICANCE

Monolithic hybrid-abutment crowns (screw-retained) and monolithic hybrid abutments with single-tooth crowns (cemented) made of pressed lithium disilicate can be used to successfully restore single implants.

BSP Implementation of prevention and treatment of peri-implant diseases - The EFP S3 level clinical practice guideline

OBJECTIVES

to adapt the supranational European Federation of Periodontology (EFP) Prevention and Treatment of Peri-implant Diseases - The EFP S3 Level Clinical Practice Guideline for UK healthcare environment, taking into account a broad range of views from stakeholders and patients.

SOURCES

This UK version, based on the supranational EFP guideline [1] published in the Journal of Clinical Periodontology, was developed using S3-level methodology, combining assessment of formal evidence from 13 systematic reviews with a moderated consensus process of a representative group of stakeholders, and accounts for health equality, environmental factors and clinical effectiveness. It encompasses 55 clinical recommendations for the Prevention and Treatment of Peri-implant Diseases, based on the classification for periodontal and peri‑implant diseases and conditions [2].

METHODOLOGY

The UK version was developed from the source guideline using a formal process called the GRADE ADOLOPMENT framework. This framework allows for adoption (unmodified acceptance), adaptation (acceptance with modifications) and the de novo development of clinical recommendations. Using this framework, following the S3-process, the underlying evidence was updated and a representative guideline group of 111 delegates from 26 stakeholder organisations was assembled into four working groups. Following the formal S3-process, all clinical recommendations were formally assessed for their applicability to the UK and adoloped accordingly.

RESULTS AND CONCLUSION

Using the ADOLOPMENT protocol, a UK version of the EFP S3-level clinical practice guideline for the Prevention and Treatment of Peri-implant Diseases was developed. This guideline delivers evidence- and consensus-based clinical recommendations of direct relevance to the UK healthcare community including the public.

CLINICAL SIGNIFICANCE

The S3-level-guidelines combine evaluation of formal evidence, grading of recommendations and synthesis with clinical expertise of a broad range of stakeholders. The international S3-level-guideline was implemented for direct clinical applicability in the UK healthcare system, facilitating a consistent, interdisciplinary, evidence-based approach with public involvement for the prevention and treatment of peri‑implant diseases.

Effect of Sagittal Root Position, Angle, and Bone Thickness on Peri-implant Tissue Phenotype and Bone Level in Socket Shield Technique: A Retrospective Case Series

There were only a few studies investigating the effect of sagittal root position (SRP), sagittal root angle (SRA), and buccal bone thickness (BBT) on peri-implant tissues using the socket shield technique (SST). This retrospective case series aimed to evaluate the SRP, SRA, and BBT in socket shield cases and examine the effect of these anatomical factors on the peri-implant tissue phenotype and bone level. Data from 27 patients (14 women, 13 men) treated with SST in the maxillary esthetic region between July 2019 and September 2021 were included. Clinical indices (modified plaque and bleeding indices, probing depth, keratinized mucosa width, mucosal thickness) and periapical radiographic recordings (marginal bone level) taken immediately after permanent prosthesis placement and 1 year later were used. Cone beam computerized tomography images were used to examine BBT, SRP, and SRA before implant placement and horizontal and vertical bone levels before implant placement and 1 year after prosthetic rehabilitation. The data were divided into groups based on BBT (<1 and ≥1 mm) and SRA values (<10° and ≥10°). There were no significant differences in 1-year clinical factors between the SRA <10° and SRA ≥10° groups. However, higher vertical bone loss was found in the SRA ≥10° group (P = .01, d = 0.53). There were no significant differences in clinical or radiographic factors between the BBT <1 mm and BBT ≥1 mm groups. In conclusion, BBT showed no significant effect on tissue phenotype and bone level, but SRA affected bone level in socket shield cases.

Radiographic evaluation of the distance between the restoration margin and the alveolar bone crest in dental implant patients: A retrospective study

OBJECTIVES

The recently introduced Implant Disease Risk Assessment (IDRA) identifies a restoration margin-alveolar bone crest (RM-AC) distance of less than 1.5 mm as a key risk factor for peri‑implant disease among eight major risk factors. This study evaluated the impact of the RM-AC distance on marginal bone loss (MBL) through radiographic analysis.

METHODS

This retrospective cross-sectional study included 77 partially edentulous patients (39 females and 38 males, aged 22 to 76 years) with 202 platform-switched conical connection implants, cement-retained, implant-supported fixed restorations, and bone-level implants placed between 2016 and 2021. Dental implants were followed for least 6 to 36 months at follow up functional loading. Study participants were categorized into Group A (RM-AC distance ≤ 1.5 mm, n = 69) and Group B (RM-AC distance > 1.5 mm, n = 133). Twelve patients in Group B and five patients in Group A had no history of periodontal disease. The MBL was measured radiographically from the most coronal point of the implant shoulder to the alveolar bone, and the RM-AC distance was measured from the restoration margin to the alveolar crest. Multinomial logistic regression analysis was used for statistical evaluation.

RESULTS

The incidence of MBL in Group A was statistically significant and 3.42 times higher than that in Group B. The rate of MBL in periodontitis Stage 4 was found to be 26.31 times higher than that in periodontitis Stage 2. The incidence of MBL was 6.097 and 5.02 times higher with increasing implant diameter and length, respectively.

CONCLUSION

This study conclusively demonstrates that RM-AC distance ≤ 1.5 significantly increases the risk of MBL, particularly in patients with a history of periodontal disease.

CLINICAL SIGNIFICANCE

This study highlights the critical role of maintaining an RM-AC distance greater than 1.5 mm in the prevention of MBL, particularly in patients with a history of periodontal disease. Since implant diameter and length have a significant impact on the risk of MBL, it emphasizes that implant demographics should also be carefully evaluated.

Cross-sectional analysis comparing prefabricated titanium to individualized hybrid zirconia abutments for cemented zirconia based fixed dental prostheses: a critical concept assessment

PURPOSE

Despite the differences in material properties and shapes among the different types of prefabricated titanium (pTiA) and individualized hybrid zirconia abutments (ihZiA), the biological and clinical relevance of materials and construction features remains vague. Yet, individualized ihZiA are increasingly implemented into daily routine aiming to satisfy rising expectations. The objective was to compare these two types of abutments in fixed dental prostheses (FDP).

METHODS

This cross-sectional study examined 462 implants in 102 patients comparing pTiA (52 patients) to ihZiA (50 patients) for FDP. These different treatment regimens were evaluated in terms of peri-implant health, radiographic bone loss, and oral-health related quality of life (OH-QoL) with special consideration of abutment type and superstructure design.

RESULTS

ihZiA showed significantly different design features than prefabricated pTiA, but the annual bone loss in both groups did not. Visible titanium in the esthetic zone negatively impacted OHIP 14 scores. The combination of an emergence angle (EA) of < 30° and a concave emergence profile (EP) as well as gingiva thickness (p = 0.002) at the time of the prosthetic restoration significantly improved the annual peri-implant bone loss, independently of the abutment type.

CONCLUSION

ihZiA showed comparable results to pTiA. To optimize the long-term outcome, not just material alone but generating adequate soft tissue thickness, minimizing the EA, and applying a concave EP seem to be the most relevant factors. To improve OH-QoL, particular attention must be paid to the esthetic zone.

Clinical effect of Nobel Biocare angulated screw channel crown compared with cement crown in the aesthetic area: A retrospective cohort study with a mean 32 months follow-up (range 12 to 70 months)

OBJECTIVE

The objective of this study is to compare the clinical efficacy of angulated screw channel abutment applied in the anterior area with regular cemented crowns.

MATERIALS AND METHODS

Forty-eight patients were included and divided into two groups: the angulated screw channel group (ASC) and regular cemented group (RC) in this retrospective cohort study. The evaluation criteria included implant/restoration survival rate, keratinized mucosa width (KMW), bleeding on probing rate (BOP%), probing depth (PD), pink aesthetic score (PES), mechanical/biological complications, emergence angle (EA), the site of implant axis penetrate (SA), marginal bone loss (MBL), and buccal bone thickness (BBT) at 0 mm, 1 mm, 3 mm, 5 mm below the implant shoulder were evaluated in immediate postoperative (T0) and follow-up period (T1).

RESULTS

This retrospective cohort study included a total of 48 patients, with a mean 32 months follow-up period range from 12 months to 70 months. The study did not find any cases of implant failure or restoration failure. EA was significantly wider in the RC group than ASC group (RC: 33.53° ± 8.36° vs ASC: 27.43° ± 8.08°, p = 0.016*). While the BOP% was statistically significant higher in the RC group than ASC group (RC: 28.35% ± 22.92% vs ASC: 13.18% ± 20.00%, p = 0.027*). No significant differences were observed in the other measurements of comparison.

CONCLUSION

Within the limitations of the study, angulated screw channel (Nobel Biocare) crowns might allow the implant axis aim at incisal edge to reduce the emergence angle in the anterior area and benefit the soft-tissue during the 12-70 months follow-up period.

The influence of implant position and of prosthetic characteristics on the occurrence of peri-implantitis: a retrospective study on periapical radiographs

OBJECTIVE

The present retrospective study aimed to investigate the influence of malposition on the occurrence of peri-implantitis.

MATERIALS AND METHODS

The study included clinical records of systemically healthy patients with single and partial implant-supported rehabilitations and at least 1-year post-loading follow-up. The parameters collected included implant-related factors, patient-related factors, site-related factors, and prosthesis-related factors. The radiographic measurements were taken by using a dedicated software and the diagnosis of peri-implantitis was made based on all the available clinical and radiographic data. Descriptive statistics were provided for all variables. Following an exploratory approach, an implant-level analysis of factors influencing the occurrence of peri-implantitis was done through a multilevel multivariate logistic regression (mixed).

RESULTS

A total of 180 implants belonging to 90 subjects were randomly selected. Malposition showed no statistically significant association with the occurrence of peri-implantitis. According to the multi-level analysis, the parameters that were significantly associated with peri-implantitis included presence / history of periodontitis (OR = 5.945, 95% CI: 1.093 - 32.334, P = 0.039) and presence of an emergence profile angle ≥ 45° (OR = 9.094, 95% CI: 2.017 - 40.995, P = 0.005).

CONCLUSIONS

Implant malposition, as defined following Buser's criteria (2004), did not influence the occurrence of peri-implantitis in the selected cohort. Conversely, history of periodontitis and presence of a prosthetic emergence profile with an angle ≥ 45° were correlated to an increased risk of peri-implantitis.

The 3D emergence profile on implant-supported restorations: A method for evaluating restorative angles

STATEMENT OF PROBLEM

Emerging evidence indicates that the emergence profile and subsequent restorative angle play a crucial role in clinical outcomes and can potentially affect the development and progression of peri-implant diseases. However, the traditional evaluation of the emergence profile and angle has been limited to mesial and distal sites using periapical x-rays, without considering the buccal sites.

PURPOSE

To describe a novel 3D method to estimate the emergence profile and restorative angles around single implant-supported crowns including buccal sites.

MATERIALS AND METHODS

A total of 30 implant-supported crowns (11 molars, 8 premolars, 8 central incisors and 1 canine) were extra-orally scanned using an intraoral scanner and the STL files produced were imported into a 3D software. The crown/abutment interface of each crown was delineated, and apico-coronal lines were automatically drawn following the shape of the crown. Three reference points were defined on the apico-coronal lines at the transition edge of the biological (BC) and the esthetic zone (EC) and the resulting angles were then calculated. The reliability of the measurements (2D and 3D) were assessed using the intraclass correlation coefficient (ICC).

RESULTS

In anterior restorations, the mean angle of the esthetic zone amounted to 162 ± 14° at mesial sites, to 140 ± 10° at buccal sites and to 163 ± 11° at distal sites. The corresponding angles at the biological zones, amounted to 155 ± 13° at mesial sites, 139 ± 15° at buccal sites and 157 ± 5° at distal sites. In posterior restorations, the mean angle of the esthetic zone amounted to 162 ± 12° at mesial sites, to 157 ± 13 at buccal sites and to 162 ± 11 at distal sites. The corresponding angles at the biological zone, amounted to 158 ± 8 at mesial sites, 150 ± 15° at buccal sites and 156 ± 10 at distal sites. The ICC for all measurements ranged between 0.77 and 0.99 indicating a good intra-examiner reliability.

CONCLUSION

Within the limitations of the present study, the 3D analysis seems to be a reliable and applicable method for the quantitative evaluation of the emergence profile in daily practice. Future randomized clinical trials are needed to assess whether a 3D analysis with the ensuing the emergence profile serves as a predictor for clinical outcomes.

CLINICAL SIGNIFICANCE

The development and implementation of a 3D workflow will provide technicians and dentists with the ability to assess the restorative angle of implant-supported restorations during the provisional phase and the final restoration. This approach may help achieve an aesthetically pleasing restoration while minimizing potential clinical complications.

Annual review of selected scientific literature: A report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry

The Scientific Investigation Committee of the American Academy of Restorative Dentistry offers this review of the 2022 dental literature to briefly touch on several topics of interest to modern restorative dentistry. Each committee member brings discipline-specific expertise in their subject areas that include (in order of the appearance in this report): prosthodontics; periodontics, alveolar bone, and peri-implant tissues; dental materials and therapeutics; occlusion and temporomandibular disorders; sleep-related breathing disorders; oral medicine and oral and maxillofacial surgery; and dental caries and cariology. The authors focused their efforts on reporting information likely to influence the daily dental treatment decisions of the reader with an emphasis on innovations, new materials and processes, and future trends in dentistry. With the tremendous volume of literature published daily in dentistry and related disciplines, this review cannot be comprehensive. Instead, its purpose is to update interested readers and provide valuable resource material for those willing to subsequently pursue greater detail on their own. Our intent remains to assist colleagues in navigating the tremendous volume of newly minted information produced annually. Finally, we hope that readers find this work helpful in managing patients.

Influence of implant restorative emergence angle and contour on peri-implant marginal bone loss: A systematic review and meta-analysis

BACKGROUND

Implant restorative emergence angle and profile may have a negative impact on peri-implant marginal bone level and may increase the risk of developing peri-implantitis. However, the role of these prosthetic features on peri-implant health is still unclear. The aim of this systematic review and meta-analyses was to evaluate the long-term outcomes of implant restorations with an emergence angle of >30° in comparison to those with ≤30° in terms of changes in peri-implant marginal bone level, periodontal parameters, and prevalence rate of peri-implantitis.

METHODS

Electronic databases were searched to identify observational studies that compared implant restorations with an emergence angle of >30° to those with ≤30°. The risk of bias was assessed using the Cochrane Collaboration's Risk of Bias tool.

RESULTS

Four studies with 912 dental implants in 397 participants were included in the present review. Of these, 455 implants had restorations with an emergence angle of >30°, while the remaining implants had restorative emergence angle of ≤30°. The follow-up time varied between 3.8 and 10.9 years. Implant restorations with an emergence angle of ≤30° were associated with less changes in peri-implant marginal bone level compared to those with emergence angle of >30°. The difference, however, was not statistically significant (mean difference 0.80; 95% confidence interval (CI) -0.13 to 1.72; p = 0.09). In platform-matched implants, the difference between the two groups was statistically significant in favor of implant restorations with emergence angle of ≤30°. In terms of emergence profile, implant restorations with convex profile had significantly higher rate of peri-implantitis (57.8%) compared to implant restorations with concave or straight profile (21.3%) (risk ratio 2.32; 95% CI 1.12-4.82; p = 0.02).

CONCLUSIONS

Within the limitation of this review, implant restorations with an emergence angles of >30° or ≤30° seem to have no significant influence on peri-implant marginal bone level. Platform-matched implants with an emergence angle of ≤30° may have positive effects on the peri-implant marginal bone level changes, but the evidence support is of low to moderate certainty.

Influence of abutment shape on peri-implant tissue conditions: A randomized clinical trial

OBJECTIVE

To analyze the influence of 3-mm high abutments with different shapes (cylindrical abutment vs. wide abutment) on marginal bone-level changes (bone loss and bone remodeling). The influence of abutment shape on implant success, probing pocket depth (PPD), and bleeding on probing (BoP) was studied as secondary objectives.

MATERIALS AND METHODS

Patients with a partially edentulous area requiring fixed dental prostheses by two implants in the posterior mandible or maxilla were included. The implants were 1 mm subcrestally placed, and osseointegration healing was submerged. Three-mm high abutments with two different shapes were randomly placed in second-stage surgery: cylindrical abutments (cylindrical group) and wide abutments (wide group). Marginal bone-level changes were measured using parallelized periapical radiographs at abutment placement, at definitive prosthesis placement, and at 1, 3, 6, and 12 months after loading. PPD and BoP were likewise measured at the control visits.

RESULTS

Sixty-four dental implants in 25 patients were included. Statistically significant differences were found in bone-level changes. The cylindrical group exhibited less mean marginal bone remodeling (MBR) and marginal bone loss (MBL) than the wide group (p < .05). Moreover, the cylindrical group showed significantly less BoP (p < .05).

CONCLUSION

Abutment shape had a significant influence upon marginal bone-level changes during the first 12 months. Cylindrical abutments caused less MBR and MBL than wide abutments. More clinical studies involving longer follow-ups and analyzing other abutment modifications are needed to improve our understanding of how abutments can affect peri-implant tissue stability.

Association of crown emergence angle and profile with dental plaque and inflammation at dental implants

BACKGROUND

The shape of implant restorations is critical for function and aesthetics. It may also be important in peri-implant tissue health preservation. This study aimed to associate the restorative contour of a single crown with marginal dental plaque accumulation, tissue inflammation and probing depths.

METHODS

Subjects with a single screw-retained implant restoration were clinically examined. The presence of dental biofilm, tissue inflammation and probing pocket depths were the dependent variables. The emergence angle, profile and depth of the mucosal tunnel were measured on superimposed digital scans of the crown soft-tissue complex, the removed crown mounted on an analogue and the soft tissue.

RESULTS

One hundred twenty two subjects (46.7% female, 68.9% never smokers, 77% with treated periodontitis and 52.5% participating in regular supportive peri-implant care) were examined. The emergence angles at the mucosal margin were 15.3 ± 9.4°, 12.7 ± 8.5°, 31.3 ± 11.8° and 19.2 ± 9.8° for the mesial, distal, vestibular and oral aspects of the crowns. The largest emergence profile angles were observed on the vestibular aspect (74.6% of cases), reaching a maximum of 61.7°, and profiles were convex in 59% of cases. Generalized estimating equations indicated that the site-specific platform-level emergence angle and profile and depth of the mucosal tunnel were significantly associated with the presence of detectable plaque accumulation (p < .01) and bleeding on probing (p < .02).

CONCLUSIONS

Subtle variations in the shape of the restorative crown are associated with biofilm accumulation and mucosal inflammation. These findings are important for 3D implant planning/positioning and preservation of peri-implant tissue health.

Implant connection and abutment selection as a predisposing and/or precipitating factor for peri-implant diseases: A review

Peri-implant mucosal integration is becoming a critical aspect for long term implant health and can be triggered the selection of implant components. The aim of this review is therefore to investigate the evidence concerning implant connection and abutment characteristics (abutment materials, design, handling) as predisposing or precipitating factor for peri-implant mucositis and peri-implantitis. Although the evidence that these features can directly predispose/precipitate peri-implant diseases is limited, there are -few- studies showing a potential role of the implant connection, trans-mucosal configuration, and handling in the development of early bone loss and/or peri-implantitis. With bone level implants, conical internal connections (with inherent platform switching) might be preferred over internal flat-flat and external connections to decrease the risk of early bone loss and potentially the risk of peri-implant disease. Moreover, there is a trend suggesting moving the prosthetic interface coronally (to the juxta-mucosal level) as soon as possible to reduce the number of disconnections and to limit the risk of cements remnants. This can be achieved by choosing a tissue-level implant or to place a trans-mucosal abutment (one abutment-one time approach) to optimize the peri-implant soft tissue seal. In absence of evidence for the biocompatibility regarding several restorative materials, biocompatible materials such as titanium or zirconia should be preferred in the trans-mucosal portion. Finally, higher implants (≥2mm) with an emergence angle below 30° seem more favourable. It should however be noted that some of this information is solely based on indirect information (such as early bone loss) and more research is needed before making firm recommendations about abutment choice. [Correction added on 13 March 2023, after first online publication: 'longer implants (≥2mm)' was changed to 'higher implants (≥2mm)' in this version.].

Short implants compared to regular dental implants after bone augmentation in the atrophic posterior mandible: umbrella review and meta-analysis of success outcomes

PURPOSE

To assess the body of evidence of short versus regular implants after bone augmentation (BA) in the atrophic posterior mandible in the context of implant treatment success outcomes.

METHODS

Seven databases, two registries, and reference lists were searched for systematic reviews and meta-analysis (SR/MA), randomized controlled trials (RCTs) and longitudinal studies published in English, Spanish or German since 2012. Confidence in the SR/MA methodology was evaluated using AMSTAR-2 and the risk of bias of primary studies using Cochrane's RoB 2.0 and ROBINS-I. A random-effects meta-analysis and a meta-regression were performed for continuous and dichotomous outcomes. GRADE approach was used to assess the certainty of the evidence.

RESULTS

Eighteen SRs/MAs, most of them "critically low" and "low" confidence with substantial overlap, included 14 relevant RCTs with a high risk of bias. A cohort study with moderate risk of bias was added. Quantitative synthesis of 595 implants and 281 hemiarches/patients indicates that the use of short implants (< 10 mm) compared to regular implants and BA may reduce implant failure at 1-year follow-up, and marginal bone loss (MBL) at 3-, 5-, and 8-year follow-up; is likely to reduce the risk of biological complications at 1-, 3-, 5-, and 8-year follow-up; and may be the patient's preferred alternative. There is a correlation between bone height, MBL and biological complications.

CONCLUSIONS

The available evidence partially suggests that the use of short implants could decrease implant failure, MBL, and biological complications, and increase patient satisfaction. However, given the need for further RCTs and real-world evidence to fully evaluate short- and long-term outcomes, it would be prudent for clinicians to carefully consider the individual needs and circumstances of the patients before deciding whether to use short implants. Trial registration PROSPERO CRD42022333526.

Influence of buccal and palatal bone thickness on post-surgical marginal bone changes around implants placed in posterior maxilla: a multi-centre prospective study

BACKGROUND

Numerous clinical variables may influence early marginal bone loss (EMBL), including surgical, prosthetic and host-related factors. Among them, bone crest width plays a crucial role: an adequate peri-implant bone envelope has a protective effect against the influence of the aforementioned factors on marginal bone stability. The aim of the present study was to investigate the influence of buccal and palatal bone thickness at the time of implant placement on EMBL during the submerged healing period.

METHODS

Patients presenting a single edentulism in the upper premolar area and requiring implant-supported rehabilitation were enrolled following inclusion and exclusion criteria. Internal connection implants (Twinfit, Dentaurum, Ispringen, Germany) were inserted after piezoelectric implant site preparation. Mid-facial and mid-palatal thickness and height of the peri-implant bone were measured immediately after implant placement (T0) with a periodontal probe and recorded to the nearest 0.5 mm. After 3 months of submerged healing (T1), implants were uncovered and measurements were repeated with the same protocol. Kruskal-Wallis test for independent samples was used to compare bone changes from T0 to T1. Multivariate linear regression models were built to assess the influence of different variables on buccal and palatal EMBL.

RESULTS

Ninety patients (50 females, 40 males, mean age 42.9 ± 15.1 years), treated with the insertion of 90 implants in maxillary premolar area, were included in the final analysis. Mean buccal and palatal bone thickness at T0 were 2.42 ± 0.64 mm and 1.31 ± 0.38 mm, respectively. Mean buccal and palatal bone thickness at T1 were 1.92 ± 0.71 mm and 0.87 ± 0.49 mm, respectively. Changes in both buccal and palatal thickness from T0 to T1 resulted statistically significant (p = 0.000). Changes in vertical bone levels from T0 to T1 resulted not significant both on buccal (mean vertical resorption 0.04 ± 0.14 mm; p = 0.479) and palatal side (mean vertical resorption 0.03 ± 0.11 mm; p = 0.737). Multivariate linear regression analysis showed a significant negative correlation between vertical bone resorption and bone thickness at T0 on both buccal and palatal side.

CONCLUSION

The present findings suggest that a bone envelope > 2 mm on the buccal side and > 1 mm on the palatal side may effectively prevent peri-implant vertical bone resorption following surgical trauma.

TRIAL REGISTRATION

The present study was retrospectively recorded in a public register of clinical trials ( www.

CLINICALTRIALS

gov - NCT05632172) on 30/11/2022.

Peri-implantitis after 40 years: Evidence, mechanisms, and implications: A mapping review

STATEMENT OF PROBLEM

The high prevalence of peri-implantitis (PI) continues to plague patients and the disease is resistant to present treatment regimens. An analysis of the available research is lacking.

PURPOSE

Given the abundance and diversity of research on the topic of PI, the purpose of this mapping review was to synthesize the literature on the prevention of PI, the histopathology of the disease, the state of present therapeutics, and any emerging treatments.

MATERIAL AND METHODS

An extensive literature search was undertaken by using the electronic databases of PubMed, Web of Science, and Science Direct. The keyword strings were peri-implantitis, dental implant, risk assessment, histopathology, prosthesis design, and treatment. The filters applied were time interval from 2000 to 2002; language, English.

RESULTS

A total of 3635 articles were taken from PubMed, 3686 articles from Web of Science, and 2450 articles from Science Direct. After applying the inclusion and exclusion criteria to the titles and abstracts of selected investigations, 214 studies were retrieved.

CONCLUSIONS

The evidence reflects a concerning incidence of PI, without a predictable treatment protocol. An in-depth patient risk assessment considering risk modification, emphasis on surgical and restorative expertise, and strict recall and maintenance is essential to minimize PI.

Marginal Bone Level and Biomechanical Behavior of Titanium-Indexed Abutment Base of Conical Connection Used for Single Ceramic Crowns on Morse-Taper Implant: A Clinical Retrospective Study

The goal of this retrospective clinical study was to evaluate the behavior of Morse-taper indexed abutments by analyzing the marginal bone level (MBL) after at least 12 months of function. Patients rehabilitated with single ceramic crowns between May 2015 and December 2020 received single Morse-taper connection implants (DuoCone implant) with two-piece straight abutment baseT used for at least 12 months, presenting periapical radiograph immediately after crown installation were enrolled. The position of the rehabilitated tooth and arch (maxilla or mandible), crown installation period, implant dimensions, abutment transmucosal height, installation site (immediate implant placement or healed area), associated with bone regeneration, immediate provisionalization, and complications after installation of the final crown were analyzed. The initial and final MBL was evaluated by comparing the initial and final X-rays. The level of significance was α = 0.05. Seventy-five patients (49 women and 26 men) enrolled had a mean period of evaluation of 22.7 ± 6.2 months. Thirty-one implant-abutment (IA) sets had between 12–18 months, 34 between 19–24 months, and 44 between 25–33 months. Only one patient failed due to an abutment fracture after 25 months of function. Fifty-eight implants were placed in the maxilla (53.2%) and 51 in the mandible (46.8%). Seventy-four implants were installed in healed sites (67.9%), and 35 were in fresh socket sites (32.1%). Thirty-two out of these 35 implants placed in fresh sockets had the gap filled with bone graft particles. Twenty-six implants received immediate provisionalization. The average MBL was −0.67 ± 0.65 mm in mesial and −0.70 ± 0.63 mm in distal (p = 0.5072). The most important finding was the statistically significant difference comparing the values obtained for MBL between the abutments with different transmucosal height portions, which were better for abutments with heights greater than 2.5 mm. Regarding the abutments’ diameter, 58 had 3.5 mm (53.2%) and 51 had 4.5 mm (46.8%). There was no statistical difference between them, with the following means and standard deviation, respectively, −0.57 ± 0.53 mm (mesial) and −0.66 ± 0.50 mm (distal), and −0.78 ± 0.75 mm (mesial) and −0.746 ± 0.76 mm (distal). Regarding the implant dimensions, 24 implants were 3.5 mm (22%), and 85 implants (78%) had 4.0 mm. In length, 51 implants had 9 mm (46.8%), 25 had 11 mm (22.9%), and 33 implants were 13 mm (30.3%). There was no statistical difference between the abutment diameters (p > 0.05). Within the limitations of this study, it was possible to conclude that better behavior and lesser marginal bone loss were observed when using abutment heights greater than 2.5 mm of transmucosal portion and when placed implants with 13 mm length. Furthermore, this type of abutment showed a little incidence of failures within the period analyzed in our study.

Marginal bone changes around platform-switched conical connection implants placed 1 or 2 mm subcrestally: A multicenter crossover randomized controlled trial

INTRODUCTION

This study analyzes early marginal bone modifications occurring around platform-switched implants with conical connection placed 1 or 2 mm subcrestally.

METHODS

This crossover randomized controlled trial enrolled partially edentulous patients needing two implants in either the posterior maxilla or mandible. Each patient received two platform-switched implants with conical connection inserted 2 mm (Test) and 1 mm (Control) subcrestally. Definitive abutments were immediately connected and, after 4 months of unsubmerged healing, screwed metal-ceramic crowns were delivered. Radiographs were taken at implant placement (T0), prosthesis delivery (T1), and after 1 year of prosthetic loading (T2).

RESULTS

Fifty-one patients (25 males and 26 females; mean age 61.2 ± 12.1 years) totaling 102 implants were included in the final analysis. Mean peri-implant bone level (PBL) reduction from T0 to T2 was not significantly different around Test (0.49 ± 0.32 mm) and Control implants (0.46 ± 0.35 mm; p = 0.66). Multivariate linear regression models highlighted a significant positive correlation between history of periodontitis and PBL reduction. At T2, no Test group implant and 6 Control group implants exhibited PBL below the implant platform (11.8% of Control group implants).

CONCLUSION

No significant differences in peri-implant marginal bone changes were demonstrated after 1 year of prosthetic loading between platform-switched implants with conical connection inserted either 1 or 2 mm subcrestally. However, 2 mm subcrestal placement resulted in deeper implant positioning at T2, with no exposure of treated implant surface and potential preventive effect against subsequent peri-implant pathology.