Oxidation of glycerol to glycolate by using supported gold and palladium nanoparticles

Fungus mediated synthesis of biogenic palladium catalyst for degradation of azo dye

Dyes are the coloured substances that are applied on different substrates such as textiles, leather and paper products, etc. Azo dyes release from the industries are toxic and recalcitrant wastewater pollutants, therefore it is necessary to degrade these pollutants from water. In this study, the palladium (0) nanoparticles (PdNPs) were generated through the biological process and exhibited for the catalytic degradation of azo dye. The palladium nanoparticles (PdNPs) were synthesized by using the cell-free approach i.e. extract of fungal strain Rhizopus sp. (SG-01), which significantly degrade the azo dye (methyl orange). The amount of catalyst was optimized by varying the concentration of PdNPs (1 mg/mL to 4 mg/mL) for 10 mL of 50 ppm methyl orange (MO) dye separately. The time dependent study demonstrates the biogenic PdNPs could effectively degrade the methyl orange dye up to 98.7% with minimum concentration (3 mg/mL) of PdNPs within 24 h of reaction. The long-term stability and effective catalytic potential up to five repeated cycles of biogenic PdNPs have good significance for acceleration the degradation of azo dyes. Thus, the use of biogenic palladium nanoparticles for dye degradation as outlined in the present study can provide an alternative and economical method for the synthesis of PdNPs as well as degradation of azo dyes present in wastewater and is helpful to efficiently remediate textile effluent.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Effect of the Wells–Dawson phosphomolybdic heteropolyacid on the conversion of glucose into glycolic acid

The Wells–Dawson phosphomolybdic heteropolyacid had high activity and selectivity in the epimerization of glucose into mannose and the [2 + 4] retro-aldol reaction of glucose/mannose.

Mechanism of visible light enhanced catalysis over curcumin functionalized Ag nanocatalysts

There is little research on the visible light photocatalytic properties of the hybrids of plasmonic metals and organic molecules (OM) with the HOMO-LUMO gap in the visible range. Here, we investigate the mechanism of the visible light enhanced reduction of p-nitrophenol (PNP) by glycerol (a green reductant) at ambient temperature over curcumin functionalized Ag nanoparticles (c-AgNPs). The catalytic activity got significantly boosted under visible light irradiation. Reaction kinetics indicated that the catalytic mechanism followed under visible light and in the dark were different. DFT calculations showed that in the ground state, the HOMO resides on Ag while the LUMO is on the curcumin part of the composite. TD-DFT calculations demonstrated the transfer of charge from Ag to curcumin on photo-excitation. Based on this information, we propose a mechanism for understanding the role of curcumin in this photocatalytic phenomenon.

Glycerol Oxidation over Supported Gold Catalysts: The Combined Effect of Au Particle Size and Basicity of Support

Gold nanoparticles supported on various oxides (CeO2, CeO2/TiO2, MgO, MgO/TiO2, La2O3, La2O3/TiO2) (with 4 wt.% Au loading) were investigated in the liquid (aqueous) phase oxidation of glycerol by molecular oxygen under mild conditions, in the presence of alkaline earth (CaO, SrO and MgO) or alkaline (NaOH) bases. Full conversion and selectivity between 38 and 68% to sodium glycerate were observed on different Au supported catalysts (Au/MgO/TiO2, Au/La2O3/TiO2, Au/CeO2 and Au/CeO2/TiO2). The combined effect of Au particle size and basicity of the support was suggested as the determining factor of the activity. Agglomeration of gold nanoparticles, found after the reaction, led to the deactivation of the catalysts, which prevents the further oxidation of sodium glycerate into sodium tartronate. Promising results were obtained with the use of alkaline earth bases (CaO, SrO, MgO), leading to the formation of free carboxylic acids instead of salts, which are formed in the presence of the more usual base, NaOH.

Advances in catalytic routes for the production of carboxylic acids from biomass: a step forward for sustainable polymers

Polymers are ubiquitously present in our daily life because they can meet a wide range of needs and fields of applications. This success, based on an irresponsible linear consumption of plastics and the access to cheap oil, is creating serious environmental problems. Two lines of actions are needed to cope with them: to adopt a circular consumption of plastics and to produce renewable carbon-neutral monomers. This review analyses the recent advances in the chemocatalytic processes for producing biomass-derived carboxylic acids. These renewable carboxylic acids are involved in the synthesis of relevant general purpose and specialty polyesters and polyamides; some of them are currently derived from oil, while others can become surrogates of petrochemical polymers due to their excellent performance properties. Polyesters and polyamides are very suitable to be depolymerised to other valuable chemicals or to their constituent monomers, what facilitates the circular reutilisation of these monomers. Different types of carboxylic acids have been included in this review: monocarboxylic acids (like glycolic, lactic, hydroxypropanoic, methyl vinyl glycolic, methyl-4-methoxy-2-hydroxybutanoic, 2,5-dihydroxypent-3-enoic, 2,5,6-trihydroxyhex-3-enoic acids, diphenolic, acrylic and δ-amino levulinic acids), dicarboxylic acids (2,5-furandicarboxylic, maleic, succinic, adipic and terephthalic acids) and sugar acids (like gluconic and glucaric acids). The review evaluates the technology status and the advantages and drawbacks of each route in terms of feedstock, reaction pathways, catalysts and economic and environmental evaluation. The prospects and the new research that should be undertaken to overcome the main problems threatening their economic viability or the weaknesses that prevent their commercial implementation have also been underlined.

A review of recent progress on electrocatalysts toward efficient glycerol electrooxidation

Glycerol electrooxidation has attracted immense attention due to the economic advantage it could add to biodiesel production. One of the significant challenges for the industrial development of glycerol electrooxidation process is the search for a suitable electrocatalyst that is sustainable, cost effective, and tolerant to carbonaceous species, results in high performance, and is capable of replacing the conventional Pt/C catalyst. We review suitable, sustainable, and inexpensive alternative electrocatalysts with enhanced activity, selectivity, and durability, ensuring the economic viability of the glycerol electrooxidation process. The alternatives discussed here include Pd-based, Au-based, Ni-based, and Ag-based catalysts, as well as the combination of two or three of these metals. Also discussed here are the prospective materials that are yet to be explored for glycerol oxidation but are reported to be bifunctional (being capable of both anodic and cathodic reaction). These include heteroatom-doped metal-free electrocatalysts, which are carbon materials doped with one or two heteroatoms (N, B, S, P, F, I, Br, Cl), and heteroatom-doped nonprecious transition metals. Rational design of these materials can produce electrocatalysts with activity comparable to that of Pt/C catalysts. The takeaway from this review is that it provides an insight into further study and engineering applications on the efficient and cost-effective conversion of glycerol to value-added chemicals.

Cost-practical of glycolic acid bioproduction by immobilized whole-cell catalysis accompanied with compressed oxygen supplied to enhance mass transfer

Bioprocess for Glycolic acid (GA) production from ethylene glycol by whole-cell catalysis of Gluconobacter oxydans is restrained by various biological impediments and high production costs. In this study, these limitations were subsided through the implementation of immobilized whole-cell bio-catalysis combined with increased oxygen supply. Results indicated that this strategy noticeably enhanced mass transfer efficiency, and prolonged cell life that significantly reduced the cost of biomass. Ultimately, with immobilized whole-cell catalysis in air-open and oxygen-open bioreactor, 41.3 and 66.9 g/L of GA was obtained within 48 h, with an increment of 62.0%. Additionally, in oxygen-compressed bioreactor, 63.3 g/L of GA was accumulated with the yield of 97.2%. Subsequently, 605.7 g of GA was produced after 10 rounds of recovery experiments. Although there was a slight decrease in GA production compared with pure-oxygen supply, production cost was reduced with limited oxygen supply. This strategy commendably demonstrated cost-practical bioprocess for GA production.

Facile synthesis of bimetallic gold-palladium nanocrystals as effective and durable advanced catalysts for improved electrocatalytic performances of ethylene glycol and glycerol oxidation

In this work, well-defined bimetallic AuPd alloyed nanocrystals (AuPd NCs) were facilely synthesized by a straightforward and controllable one-step wet-chemical strategy, using a biomolecule (L-hydroxyproline, L-Hyp) as the green stabilizer and the structure-directing agent. Their morphology, size, composition, crystal structures and growth mechanism were investigated by a series of techniques. The synthesized architectures exhibited enlarged electrochemically active surface area (ECSA), improved catalytic activity, enhanced durability and stability towards ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR) in alkaline electrolytes in comparison with commercial Pd black catalyst.

Selective glycerol oxidation over ordered mesoporous copper aluminum oxide catalysts

Ordered mesoporous Cu–Al₂O₃ catalysts were employed for the selective oxidation of glycerol into value-added products. Co-solvents such as ethanol, 1-propanol, and tert-butanol strongly improve the reaction kinetics.

Advances in biogenic synthesis of palladium nanoparticles

Due to their catalytic activity, biogenic synthesis of Pd nanparticles is of significant importance.

Plasmonic Au/TiO2nanostructures for glycerol oxidation

Visible light irradiation of the reaction volume results in boosted conversion for glycerol oxidation due to plasmonic properties of Au/TiO₂.

AuPt Alloy on TiO2: A Selective and Durable Catalyst for L-Sorbose Oxidation to 2-Keto-Gulonic Acid

Pt nanoparticles were prepared by a sol immobilization route, deposited on supports with different acid/base properties (MgO, activated carbon, TiO2 , Al2O3, H-Mordenite), and tested in the selective oxidation of sorbose to 2-keto-gulonic acid (2-KGUA), an important precursor for vitamin C. In general, as the basicity of the support increased, a higher catalytic activity occurred. However, in most cases, a strong deactivation was observed. The best selectivity to 2-KGUA was observed with acidic supports (TiO2 and H-Mordenite) that were able to minimize the formation of C1/C2 products. We also demonstrated that, by alloying Pt to Au, it is possible to enhance significantly the selectivity of Pt-based catalysts. Moreover, the AuPt catalyst, unlike monometallic Pt, showed good stability in recycling because of the prevention of metal leaching during the reaction.

Glycerol oxidation using gold-containing catalysts

Glycerol is an important byproduct of biodiesel production, and it is produced in significant amounts by transesterification of triglycerides with methanol. Due to the highly functionalized nature of glycerol, it is an important biochemical that can be utilized as a platform chemical for the production of high-added-value products. At present, research groups in academia and industry are exploring potential direct processes for the synthesis of useful potential chemicals using catalytic processes. Over the last 10 years, there has been huge development of potential catalytic processes using glycerol as the platform chemical. One of the most common processes investigated so far is the catalytic oxidation of glycerol at mild conditions for the formation of valuable oxygenated compounds used in the chemical and pharmaceutical industry. The major challenges associated with the selective oxidation of glycerol are (i) the control of selectivity to the desired products, (ii) high activity and resistance to poisoning, and (iii) minimizing the usage of alkaline conditions. To address these challenges, the most common catalysts used for the oxidation of glycerol are based on supported metal nanoparticles. The first significant breakthrough was the successful utilization of supported gold nanoparticles for improving the selectivity to specific products, and the second was the utilization of supported bimetallic nanoparticles based on gold, palladium, and platinum for improving activity and controlling the selectivity to the desired products. Moreover, the utilization of base-free reaction conditions for the catalytic oxidation of glycerol has unlocked new pathways for the production of free-base products, which facilitates potential industrial application. The advantages of using gold-based catalysts are the improvement of the catalyst lifetime, stability, and reusability, which are key factors for potential commercialization. In this Account, we discuss the advantages of the using supported gold-based nanoparticles, preparation methods for achieving highly active gold-based catalysts, and parameters such as particle size, morphology of the bimetallic particle, and metal-support interactions, which can influence activity and selectivity to the desired products.

PtAu alloy nanoparticles supported on thermally expanded graphene oxide as a catalyst for the selective oxidation of glycerol

Thermally expanded graphene oxide supported PtAu alloy nanoparticles showed high catalytic activity in the oxidation of glycerol in base-free aqueous solution.

Sustainable production of syngas from biomass-derived glycerol by steam reforming over highly stable Ni/SiC

The production of syngas was investigated by steam reforming glycerol over Ni/Al(2)O(3), Ni/CeO(2), and Ni/SiC (which have acidic, basic, and neutral properties) at temperatures below 773 K. The complete and stable conversion of glycerol with a yield (higher than 90 %) of gaseous products (mainly syngas) was achieved over Ni/SiC during a 60 h reaction, whereas the conversion of glycerol continually decreases over Ni/Al(2)O(3) (by 49.8 %) and Ni/CeO(2) (by 77.1 %). The deactivation of Ni/Al(2)O(3) and Ni/CeO(2) is mainly caused by coke deposition because of the C-C cleavage of the byproducts produced by dehydration over acidic sites and condensation over basic sites. Gaseous products with a 1.0-1.9 syngas ratio (H(2)/CO) are produced over Ni/SiC. This ratio is required for the Fischer-Tropsch synthesis. However, a syngas ratio of more than 3.0 was observed over Ni/Al(2)O(3) and Ni/CeO(2) because of the high activity of the water-gas-shift reaction. Any dissociative or associative adsorption of water on Al(2)O(3) and CeO(2) promotes a water-gas-shift reaction and produces a higher syngas ratio. H(2) and CO were mainly produced by decomposition of glycerol through dehydrogenation and decarbonylation over Ni sites. Thus, SiC promotes an intrinsic contribution of nickel (dehydrogenation, and decarbonylation) without any byproducts from the dehydration and condensation.

Contrast and Synergy between Electrocatalysis and Heterogeneous Catalysis

The advances in spectroscopy and theory that have occurred over the past two decades begin to provide detailed in situ resolution of the molecular transformations that occur at both gas/metal as well as aqueous/metal interfaces. These advances begin to allow for a more direct comparison of heterogeneous catalysis and electrocatalysis. Such comparisons become important, as many of the current energy conversion strategies involve catalytic and electrocatalytic processes that occur at fluid/solid interfaces and display very similar characteristics. Herein, we compare and contrast a few different catalytic and electrocatalytic systems to elucidate the principles that cross-cut both areas and establish characteristic differences between the two with the hope of advancing both areas.