Size-Dependent Activity of Palladium Nanoparticles: Efficient Conversion of CO2 into Formate at Low Overpotentials

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Impact of palladium/palladium hydride conversion on electrochemical CO2 reduction via in-situ transmission electron microscopy and diffraction

Electrochemical conversion of CO2 offers a sustainable route for producing fuels and chemicals. Pd-based catalysts are effective for converting CO2 into formate at low overpotentials and CO/H2 at high overpotentials, while undergoing poorly understood morphology and phase structure transformations under reaction conditions that impact performance. Herein, in-situ liquid-phase transmission electron microscopy and select area diffraction measurements are applied to track the morphology and Pd/PdHx phase interconversion under reaction conditions as a function of electrode potential. These studies identify the degradation mechanisms, including poisoning and physical structure changes, occurring in PdHx/Pd electrodes. Constant potential density functional theory calculations are used to probe the reaction mechanisms occurring on the PdHx structures observed under reaction conditions. Microkinetic modeling reveals that the intercalation of *H into Pd is essential for formate production. However, the change in electrochemical CO2 conversion selectivity away from formate and towards CO/H2 at increasing overpotentials is due to electrode potential dependent changes in the reaction energetics and not a consequence of morphology or phase structure changes.

High-Dispersive Pd Nanoparticles on Hierarchical N-Doped Carbon Nanocages to Boost Electrochemical CO2 Reduction to Formate at Low Potential

Electrochemical CO2 reduction reaction (CO2 RR) to value-added chemicals/fuels is an effective strategy to achieve the carbon neutral. Palladium is the only metal to selectively produce formate via CO2 RR at near-zero potentials. To reduce cost and improve activity, the high-dispersive Pd nanoparticles on hierarchical N-doped carbon nanocages (Pd/hNCNCs) are constructed by regulating pH in microwave-assisted ethylene glycol reduction. The optimal catalyst exhibits high formate Faradaic efficiency of >95% within -0.05-0.30 V and delivers an ultrahigh formate partial current density of 10.3 mA cm-2 at the low potential of -0.25 V. The high performance of Pd/hNCNCs is attributed to the small size of uniform Pd nanoparticles, the optimized intermediates adsorption/desorption on modified Pd by N-doped support, and the promoted mass/charge transfer kinetics arising from the hierarchical structure of hNCNCs. This study sheds light on the rational design of high-efficient electrocatalysts for advanced energy conversion.

Promote electroreduction of CO2 via catalyst valence state manipulation by surface-capping ligand

Electrochemical CO2 reduction provides a potential means for synthesizing value-added chemicals over the near equilibrium potential regime, i.e., formate production on Pd-based catalysts. However, the activity of Pd catalysts has been largely plagued by the potential-depended deactivation pathways (e.g., [Formula: see text]-PdH to [Formula: see text]-PdH phase transition, CO poisoning), limiting the formate production to a narrow potential window of 0 V to -0.25 V vs. reversible hydrogen electrode (RHE). Herein, we discovered that the Pd surface capped with polyvinylpyrrolidone (PVP) ligand exhibits effective resistance to the potential-depended deactivations and can catalyze formate production at a much extended potential window (beyond -0.7 V vs. RHE) with significantly improved activity (~14-times enhancement at -0.4 V vs. RHE) compared to that of the pristine Pd surface. Combined results from physical and electrochemical characterizations, kinetic analysis, and first-principle simulations suggest that the PVP capping ligand can effectively stabilize the high-valence-state Pd species (Pdδ+) resulted from the catalyst synthesis and pretreatments, and these Pdδ+ species are responsible for the inhibited phase transition from [Formula: see text]-PdH to [Formula: see text]-PdH, and the suppression of CO and H2 formation. The present study confers a desired catalyst design principle, introducing positive charges into Pd-based electrocatalyst to enable efficient and stable CO2 to formate conversion.

Glutaraldehyde fixation promotes palladium and gold nanoparticles formation in yeast and enhances their catalytic activity in 4-nitrophenol reduction

When observing biosynthesized metal nanoparticles in microorganisms, glutaraldehyde is commonly used as a fixative to prepare TEM ultra-thin sections. However, as a chemical reagent with aldehyde groups, its reduction potential on metal ions has yet to be studied elaborately. Herein, we explored the influences of glutaraldehyde on yeast-synthesized gold nanoparticles (AuNPs), palladium nanoparticles (PdNPs) and their catalytic performance. A modified method for ultra-thin section preparation without glutaraldehyde fixation was developed to exclude its influence on AuNPs/PdNPs observation. It was confirmed that glutaraldehyde could promote the biosynthesis of AuNPs and PdNPs extra- and intracellularly, without altering their crystal structure and chemical state. The adsorption and reduction of Au(III)/Pd(II) were attributed to the different components of the yeast cell. Specifically, the amines and carboxyl groups in proteins and polysaccharides were involved in adsorption, while the reducing sugars hydrolyzed from polysaccharides were responsible for Au(III)/Pd(II) reduction. After glutaraldehyde fixation, the catalytic activities of Au/Pd-loaded yeast in 4-nitrophenol reduction were enhanced as well. Therefore, the influence of chemical fixatives in biosynthesized metal nanoparticles should be taken into consideration in regard to SEM, TEM observation and catalytic performance.

Ag-induced Phase Transition of Bi2 O3 Nanofibers for Enhanced Energy Conversion Efficiency towards Formate in CO2 Electroreduction

Bi-based electrocatalysts have been widely investigated in the CO₂ reduction reaction (CO₂ RR) for the formation of formate. However, it remains a challenge to achieve high Faradaic efficiency (FE) and industrial current densities at low overpotentials for obtaining both high formate productivity and energy efficiency (EE). Herein, we report an Ag-Bi₂ O₃ hybrid nanofiber (Ag-Bi₂ O₃ ) for highly efficient electrochemical reduction of CO₂ to formate. Ag-Bi₂ O₃ exhibits a formate FE of >90% for current densities from -10 to -250 mA ⋅ cm^-2 and attains a yield rate of 11.7 mmol ⋅ s^-1  ⋅ m^-2 at -250 mA ⋅ cm^-2 . Moreover, Ag-Bi₂ O₃ increased the EE (52.7%) by nearly 10% compared to a Bi₂ O₃ only counterpart. Structural characterization and in-situ Raman results suggest that the presence of Ag induced the conversion of Bi₂ O₃ from a monoclinic phase (α-Bi₂ O₃ ) to a metastable tetragonal phase (β-Bi₂ O₃ ) and accelerated the formation of active metallic Bi at low overpotentials (at > -0.3 V), which together contributes to the highly efficient formate formation.

Electrochemical conversion of CO2 to value-added chemicals over bimetallic Pd-based nanostructures: Recent progress and emerging trends

Electrochemical conversion of CO₂ to fuels and chemicals as a sustainable solution for waste transformation has garnered tremendous interest to combat the fervent issue of the prevailing high atmospheric CO₂ concentration while contributing to the generation of sustainable energy. Monometallic palladium (Pd) has been shown promising in electrochemical CO₂ reduction, producing formate or CO depending on applied potentials. Recently, bimetallic Pd-based materials strived to fine-tune the binding affinity of key intermediates is a prominent strategy for the desired product formation from CO₂ reduction. Herein, the recent emerging trends on bimetallic Pd-based electrocatalysts are reviewed, including fundamentals of CO₂ electroreduction and material engineering of bimetallic Pd-electrocatalysts categorized by primary products. Modern analytical techniques on these novel electrocatalysts are also thoroughly studied to get insights into reaction mechanisms. Lastly, we deliberate over the challenges and prospects for Pd-based catalysts for electrochemical CO₂ conversion.

Intercalated Gold Nanoparticle in 2D Palladium Nanosheet Avoiding CO Poisoning for Formate Production under a Wide Potential Window

The electrochemical CO₂ reduction into formate acid over Pd-based catalysts under a wide potential window is a challenging task; CO poisoning commonly occurring on the vulnerable surface of Pd must be overcome. Herein, we designed a two-dimensional (2D) AuNP-in-PdNS electrocatalyst, in which the Au nanoparticles are intercalated in Pd nanosheets, for formate production under a wide potential window from -0.1 to -0.7 V versus a reversible hydrogen electrode. Based on the X-ray absorption spectra (XAS) characterizations, CO accumulation detection, and CO stripping voltammetry measurements, we observed that the intercalated Au nanoparticles could effectively avoid the CO formation and boost the formate production on the Pd nanosheet surface by regulating its electronic structure.

CO2 Adsorption on PtCu Sub-Nanoclusters Deposited on Pyridinic N-Doped Graphene: A DFT Investigation

To reduce the CO2 concentration in the atmosphere, its conversion to different value-added chemicals plays a very important role. Nevertheless, the stable nature of this molecule limits its conversion. Therefore, the design of highly efficient and selective catalysts for the conversion of CO2 to value-added chemicals is required. Hence, in this work, the CO2 adsorption on Pt4-xCux (x = 0-4) sub-nanoclusters deposited on pyridinic N-doped graphene (PNG) was studied using the density functional theory. First, the stability of Pt4-xCux (x = 0-4) sub-nanoclusters supported on PNG was analyzed. Subsequently, the CO2 adsorption on Pt4-xCux (x = 0-4) sub-nanoclusters deposited on PNG was computed. According to the binding energies of the Pt4-xCux (x = 0-4) sub-nanoclusters on PNG, it was observed that PNG is a good material to stabilize the Pt4-xCux (x = 0-4) sub-nanoclusters. In addition, charge transfer occurred from Pt4-xCux (x = 0-4) sub-nanoclusters to the PNG. When the CO2 molecule was adsorbed on the Pt4-xCux (x = 0-4) sub-nanoclusters supported on the PNG, the CO2 underwent a bond length elongation and variations in what bending angle is concerned. In addition, the charge transfer from Pt4-xCux (x = 0-4) sub-nanoclusters supported on PNG to the CO2 molecule was observed, which suggests the activation of the CO2 molecule. These results proved that Pt4-xCux (x = 0-4) sub-nanoclusters supported on PNG are adequate candidates for CO2 adsorption and activation.

Bi2O3 Nanosheets Grown on Carbon Nanofiber with Inherent Hydrophobicity for High-Performance CO2 Electroreduction in a Wide Potential Window

The ever-increasing concern for adverse climate changes has propelled worldwide research on the reduction of CO₂ emission. In this regard, CO₂ electroreduction (CER) to formate is one of the promising approaches to converting CO₂ to a useful product. However, to achieve a high production rate of formate, the existing catalysts for CER fall short of expectation in maintaining the high formate selectivity and activity over a wide potential window. Through this study, we report that Bi₂O₃ nanosheets (NSs) grown on carbon nanofiber (CNF) with inherent hydrophobicity achieve a peak formate current density of 102.1 mA cm^-2 and high formate Faradaic efficiency of >93% over a very wide potential window of 1000 mV. To the best of our knowledge, this outperforms all the relevant achievements reported so far. In addition, the Bi₂O₃ NSs on CNF demonstrate a good antiflooding capability when operating in a flow cell system and can deliver a current density of 300 mA cm^-2. Molecular dynamics simulations indicate that the hydrophobic carbon surface can repel water molecules to form a robust solid-liquid-gas triple-phase boundary and a concentrated CO₂ layer; both can boost CER activity with the local high concentration of CO₂ and through inhibiting the hydrogen evolution reaction (HER) by reducing proton contacts. This water-repelling effect also increases the local pH at the catalyst surface, thus inhibiting HER further. More significantly, the concept and methodology of this hydrophobic engineering could be broadly applicable to other formate-producing materials from CER.

Bias-Adaptable CO2-to-CO Conversion via Tuning the Binding of Competing Intermediates

CO₂ electroreduction powered by renewable electricity represents a promising method to enclose anthropogenic carbon cycle. Current catalysts display high selectivity toward the desired product only over a narrow potential window due primarily to unoptimized intermediate binding. Here, we report a functional ligand modification strategy in which palladium nanoparticles are encapsulated inside metal-organic frameworks with 2,2'-bipyridine organic linkers to tune intermediate binding and thus to sustain a highly selective CO₂-to-CO conversion over widened potential window. The catalyst exhibits CO faradaic efficiency in excess of 80% over a potential window from -0.3 to -1.2 V and reaches the maxima of 98.2% at -0.8 V. Mechanistic studies show that the 2,2'-bipyridine on Pd surface reduces the binding strength of both *H and *CO, a too strong binding of which leads to competing formate production and CO poison, respectively, and thus enhances the selectivity and stability of CO product.

Suppression of the Hydrogen Evolution Reaction Is the Key: Selective Electrosynthesis of Formate from CO2 over Porous In55Cu45 Catalysts

Direct electrosynthesis of formate through CO₂ electroreduction (denoted CO₂RR) is currently attracting great attention because formate is a highly valuable commodity chemical that is already used in a wide range of applications (e.g., formic acid fuel cells, tanning, rubber production, preservatives, and antibacterial agents). Herein, we demonstrate highly selective production of formate through CO₂RR from a CO₂-saturated aqueous bicarbonate solution using a porous In₅₅Cu₄₅ alloy as the electrocatalyst. This novel high-surface-area material was produced by means of an electrodeposition process utilizing the dynamic hydrogen bubble template approach. Faradaic efficiencies (FEs) of formate production (FE_formate) never fell below 90% within a relatively broad potential window of approximately 400 mV, ranging from -0.8 to -1.2 V vs the reversible hydrogen electrode (RHE). A maximum FE_formate of 96.8%, corresponding to a partial current density of j_formate = -8.9 mA cm^-2, was yielded at -1.0 V vs RHE. The experimental findings suggested a CO₂RR mechanism involving stabilization of the HCOO* intermediate on the In₅₅Cu₄₅ alloy surface in combination with effective suppression of the parasitic hydrogen evolution reaction. What makes this CO₂RR alloy catalyst particularly valuable is its stability against degradation and chemical poisoning. An almost constant formate efficiency of ∼94% was maintained in an extended 30 h electrolysis experiment, whereas pure In film catalysts (the reference benchmark system) showed a pronounced decrease in formate efficiency from 82% to 50% under similar experimental conditions. The identical location scanning electron microscopy approach was applied to demonstrate the structural stability of the applied In₅₅Cu₄₅ alloy foam catalysts at various length scales. We demonstrate that the proposed catalyst concept could be transferred to technically relevant support materials (e.g., carbon cloth gas diffusion electrode) without altering its excellent figures of merit.

Ensemble effects in Cu/Au ultrasmall nanoparticles control the branching point for C1 selectivity during CO2 electroreduction

Bimetallic catalysts provide opportunities to overcome scaling laws governing selectivity of CO2 reduction (CO2R). Cu/Au nanoparticles show promise for CO2R, but Au surface segregation on particles with sizes ≥7 nm prevent investigation of surface atom ensembles. Here we employ ultrasmall (2 nm) Cu/Au nanoparticles as catalysts for CO2R. The high surface to volume ratio of ultrasmall particles inhibits formation of a Au shell, enabling the study of ensemble effects in Cu/Au nanoparticles with controllable composition and uniform size and shape. Electrokinetics show a nonmonotonic dependence of C1 selectivity between CO and HCOOH, with the 3Au:1Cu composition showing the highest HCOOH selectivity. Density functional theory identifies Cu2/Au(211) ensembles as unique in their ability to synthesize HCOOH by stabilizing CHOO* while preventing H2 evolution, making C1 product selectivity a sensitive function of Cu/Au surface ensemble distribution, consistent with experimental findings. These results yield important insights into C1 branching pathways and demonstrate how ultrasmall nanoparticles can circumvent traditional scaling laws to improve the selectivity of CO2R.

Rational design of tandem catalysts using a core-shell structure approach

A facile and rational approach to synthesize bimetallic heterogeneous tandem catalysts is presented. Using core-shell structures, it is possible to create spatially controlled ensembles of different nanoparticles and investigate coupled chemocatalytic reactions. The CO2 hydrogenation to methane and light olefins was tested, achieving a tandem process successfully.

Oxo-functionalised mesoionic NHC nickel complexes for selective electrocatalytic reduction of CO2 to formate

Strategies for the conversion of CO2 to valuable products are paramount for reducing the environmental risks associated with high levels of this greenhouse gas and offer unique opportunities for transforming waste into useful products. While catalysts based on nickel as an Earth-abundant metal for the sustainable reduction of CO2 are known, the vast majority produce predominantly CO as a product. Here, efficient and selective CO2 reduction to formate as a synthetically valuable product has been accomplished with novel nickel complexes containing a tailored C,O-bidentate chelating mesoionic carbene ligand. These nickel(ii) complexes are easily accessible and show excellent catalytic activity for electrochemical H+ reduction to H2 (from HOAc in MeCN), and CO2 reduction (from CO2-saturated MeOH/MeCN solution) with high faradaic efficiency to yield formate exclusively as an industrially and synthetically valuable product from CO2. The most active catalyst precursor features the 4,6-di-tert-butyl substituted phenolate triazolylidene ligand, tolerates different proton donors including water, and reaches an unprecedented faradaic efficiency of 83% for formate production, constituting the most active and selective Ni-based system known to date for converting CO2 into formate as an important commodity chemical.

Electrode Materials Engineering in Electrocatalytic CO2 Reduction: Energy Input and Conversion Efficiency

Electrocatalytic CO₂ reduction (ECR) is a promising technology to simultaneously alleviate CO₂ -caused climate hazards and ever-increasing energy demands, as it can utilize CO₂ in the atmosphere to provide the required feedstocks for industrial production and daily life. In recent years, substantial progress in ECR systems has been achieved by the exploitation of various novel electrode materials. The anodic materials and cathodic catalysts that have, respectively, led to high-efficiency energy input and effective heterogenous catalytic conversion in ECR systems are comprehensively reviewed. Based on the differences in the nature of energy sources and the role of materials used at the anode, the fundamentals of ECR systems, including photo-anode-assisted ECR systems and bio-anode-assisted ECR systems, are explained in detail. Additionally, the cathodic reaction mechanisms and pathways of ECR are described along with a discussion of different design strategies for cathode catalysts to enhance conversion efficiency and selectivity. The emerging challenges and some perspective on both anode materials and cathodic catalysts are also outlined for better development of ECR systems.

Mesoporous PdAg Nanospheres for Stable Electrochemical CO2 Reduction to Formate

Palladium is a promising material for electrochemical CO₂ reduction to formate with high Faradaic efficiency near the equilibrium potential. It unfortunately suffers from problematic operation stability due to CO poisoning on surface. Here, it is demonstrated that alloying is an effective strategy to alleviate this problem. Mesoporous PdAg nanospheres with uniform size and composition are prepared from the co-reduction of palladium and silver precursors in aqueous solution using dioctadecyldimethylammonium chloride as the structure-directing agent. The best candidate can initiate CO₂ reduction at zero overpotential and achieve high formate selectivity close to 100% and great stability even at <-0.2 V versus reversible hydrogen electrode. The high selectivity and stability are believed to result from the electronic coupling between Pd and Ag, which lowers the d-band center of Pd and thereby significantly enhances its CO tolerance, as evidenced by both electrochemical analysis and theoretical simulations.

Cyclic two-step electrolysis for stable electrochemical conversion of carbon dioxide to formate

Pd metal and Pd-based alloys are ideal catalysts that allow for the electrochemical conversion of CO₂ to HCOO⁻ at almost zero-overpotential with high selectivity, but catalyst degradation caused by concurrent CO poisoning limits their practical implementation. Here, we demonstrate that cyclic two-step electrolysis, by applying the reduction and oxidation potentials alternately, achieves 100% current density stability and 97.8% selectivity toward HCOO⁻ production for at least 45 h. The key idea for achieving the reliability is based on the selective removal of CO by controlling the parameters during the oxidation step, which utilizes the different reversibility of HCOO⁻ and CO production reactions. Furthermore, it is found that potentiostatic electrolysis causes CO adsorption and subsequent dehydridation, which in turn lowers HCOO⁻ selectivity. Our work provides a system-level strategy for solving the poisoning issue that is inevitable in many electrocatalytic reactions.

Reduction of carbon dioxide is promising for the production of value-added chemicals, but electrocatalysts are hindered by carbon monoxide poisoning. Here, the authors alternate reduction and oxidation potentials to achieve stable and selective long-term electrocatalytic reduction of carbon dioxide to formate.

Alloy Nanocatalysts for the Electrochemical Oxygen Reduction (ORR) and the Direct Electrochemical Carbon Dioxide Reduction Reaction (CO2 RR)

In the face of the global energy challenge and progressing global climate change, renewable energy systems and components, such as fuel cells and electrolyzers, which close the energetic oxygen and carbon cycles, have become a technology development priority. The electrochemical oxygen reduction reaction (ORR) and the direct electrochemical carbon dioxide reduction reaction (CO₂ RR) are important electrocatalytic processes that proceed at gas diffusion electrodes of hydrogen fuel cells and CO₂ electrolyzers, respectively. However, their low catalytic activity (voltage efficiency), limited long-term stability, and moderate product selectivity (related to their Faradaic efficiency) have remained challenges. To address these, suitable catalysts are required. This review addresses the current state of research on Pt-based and Cu-based nanoalloy electrocatalysts for ORR and CO₂ RR, respectively, and critically compares and contrasts key performance parameters such as activity, selectivity, and durability. In particular, Pt nanoparticles alloyed with transition metals, post-transition metals and lanthanides, are discussed, as well as the material characterization and their performance for the ORR. Then, bimetallic Cu nanoalloy catalysts are reviewed and organized according to their main reaction product generated by the second metal. This review concludes with a perspective on nanoalloy catalysts for the ORR and the CO₂ RR, and proposes future research directions.

Porous Palladium Nanomeshes with Enhanced Electrochemical CO2 -into-Syngas Conversion over a Wider Applied Potential

Electrochemical conversion of CO₂ into syngas, which can be used directly in the classical petroleum industrial processes, provides a powerful approach for achieving the recycling of anthropogenic carbon. Pd has previously been reported to be capable of converting CO₂ into syngas with various CO/H₂ ratios, but only at limited applied potential, which is mainly attributed to fewer active sites exposed toward electrocatalysis. Herein, high-performance Pd nanomeshes (NMs) assembled with branch-like Pd nanoparticles were designed and synthesized by using a simple interface-induced self-assembly strategy; these NMs could catalyze CO₂ -into-syngas conversion with a high current density in a wide applied potential range from -0.5 to -1.0 V (vs. reversible hydrogen electrode). Further evidence validated that the enhanced activity of the Pd NMs was not only caused by the crosslinked network structure accelerating electron transport, but also by the greater number of edge and/or corner active sites exposed on the surface of the NMs, which facilitated CO₂ adsorption, CO₂ ^.- formation, COOH* stabilization, and CO generation. Under optimal operating conditions, Pd NMs could balance two competing reactions: CO₂ reduction and hydrogen evolution. The resultant syngases with the ideal and tunable CO/H₂ ratio between 0.5:1 and 1:1 could be used directly for methanol synthesis and Fischer-Tropsch reactions.

Electrochemical Reduction of CO2 by SnOx Nanosheets Anchored on Multiwalled Carbon Nanotubes with Tunable Functional Groups

Sn-based electrocatalysts are promising for the electrochemical CO₂ reduction reaction (CO2RR), but suffer from poor activity and selectivity. A hierarchical structure composed of ultrathin SnO_x nanosheets anchored on the surface of the commercial multiwalled carbon nanotubes (MWCNTs) is synthesized by a simple hydrothermal process. The electrocatalytic performance can be further tuned by functionalization of the MWCNTs with COOH, NH₂ , and OH groups. Both SnO_x @MWCNTs-COOH and SnO_x @MWCNTs-NH₂ show excellent catalytic activity for CO₂ RR with nearly 100 % selectivity for C₁ products (formate and CO). SnO_x @MWCNTs-COOH has favorable formate selectivity with a remarkably high faradaic efficiency (FE) of 77 % at -1.25 V versus standard hydrogen electrode (SHE) and a low overpotential of 246 mV. However, SnO_x @MWCNTs-NH₂ manifests increased selectivity for CO with higher current density. Density functional theory calculations and experimental studies demonstrate that the interaction between Sn species and functional groups play an important role in the tuning of the catalytic activity and selectivity of these functionalized electrocatalysts. SnO_x @MWCNTs-COOH and SnO_x @MWCNTs-NH₂ both effectively inhibit the hydrogen evolution reaction and prove stable without any significant degradation over 20 h of continuous electrolysis at -1.25 V versus SHE.

Zinc-Coordinated Nitrogen-Codoped Graphene as an Efficient Catalyst for Selective Electrochemical Reduction of CO2 to CO

Electrochemical reduction of CO₂ to value-added chemicals by using renewable electricity offers a promising strategy to deal with rising CO₂ emission and the energy crisis. Single-site zinc-coordinated nitrogen-codoped graphene (Zn-N-G) catalyzes the electrochemical reduction of CO₂ to CO. The Zn-N-G catalyst exhibits excellent intrinsic activity toward CO₂ reduction, reaching a faradaic efficiency of 91 % for CO production at a low overpotential of 0.39 V. X-ray absorption fine structure and X-ray photoelectron spectroscopy both confirm the presence of isolated Zn-N_x moieties, which act as the key active sites for CO formation. DFT calculations reveal the origin of enhanced activity for CO₂ reduction on Zn-N-G catalysts. This work provide further understanding of the active centers on transition metal-nitrogen-carbon (M-N-C) catalysts for electrochemical reduction of CO₂ to CO.

Oxygenates from the Electrochemical Reduction of Carbon Dioxide

Electrochemical reduction of carbon dioxide (CO2 ) driven by renewable electricity to give chemicals and fuels is considered an ideal approach that can alleviate both carbon emission and energy tension stress. High-value chemicals such as oxygenates can be effectively produced from the electroreduction of CO2 , and this is highly attractive to promote the economy and applicability of CO2 utilization. This review focuses on recent advancements in the electrochemical reduction of CO2 to formic acid, methanol, ethanol, acetic acid, and other oxygenates. The principles of the process, influencing factors, and typical catalysts are summarized. On the basis of the aforementioned discussions, we present future prospects for further development of the electroreduction of CO2 to oxygenates.

Surfactant-Free Synthesis of Carbon-Supported Palladium Nanoparticles and Size-Dependent Hydrogen Production from Formic Acid-Formate Solution

Steerable hydrogen generation from the hydrogen storage chemical formic acid via heterogeneous catalysis has attracted considerable interest given the safety and efficiency concerns in handling H₂. Herein, a series of carbon-supported capping-agent-free Pd nanoparticles (NPs) with mean sizes tunable from 2.0 to 5.2 nm are developed due to the demand for more efficient dehydrogenation from a formic acid-formate solution of pH 3.5 at room temperature. The trick for the facile size-controlled synthesis of Pd/C catalysts is the selective addition of Na₂CO₃, NH₃·H₂O, or NaOH to a Pd(II) solution to attain initial pH values of 7-9.5. For comparison, cuboctahedron modeling and electrochemical CO_ads stripping methods are applied to evaluate active surface Pd sites for turnover frequency (TOF) calculation. Both mass activity and specific activity (TOF) of hydrogen production are not only time-dependent but also Pd-size-dependent. An initial H₂ production rate of 246 L·h^-1·g_Pd^-1 is achieved on 2.0 nm Pd/C at 303 K, together with a TOF of 1815 h^-1 on the basis of cuboctahedron modeling of surface-active Pd sites. The initial TOF exhibits a significant rise from 3.5 down to 2.8 nm and then levels off below 2.8 nm and even shows a maxima at ca. 2.2 nm using the electrochemical surface area for calculation. The volcano-shaped dependence of TOF on Pd NP size may be better attributed to the changing ratios of terrace sites to defect sites on Pd NPs.