Electrospinning Hetero-Nanofibers of Fe3 C-Mo2 C/Nitrogen-Doped-Carbon as Efficient Electrocatalysts for Hydrogen Evolution

Impact of morphology and oxygen vacancy content in Ni, Fe co-doped ceria for efficient electrocatalyst based water splitting

Designing a highly efficient, low-cost, sustainable electrocatalyst for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through water splitting is a current challenge for renewable energy technologies. This work presents a modified sol-gel route to prepare metal-ion(s) doped cerium oxide nanostructures as an efficient electrocatalyst for overall water splitting. Nickle (Ni) and iron (Fe) co-doping impacts the morphology in cerium oxide resulting in 5 nm nanoparticles with a mesoporous-like microstructure. The high level 20 mol% (1 : 1 ratio) of Ni + Fe bimetal-ion(s) doped CeO2 shows excellent HER and OER activities compared to the monodoped Fe/Ni and pristine CeO2. The co-doped catalysts required a low overpotential of 104 mV and 380 mV for HER and OER, respectively, in 1 M KOH, at a current density of 10 mA cm-2. The Tafel slopes of 95 mV dec-1 and 65 mV dec-1 were measured for HER and OER with the same representative samples which demonstrated excellent stability even after continuous operation for 20 hours in the alkaline medium. The unique morphology, enhanced oxygen vacancy (Ov) content and the synergistic effects of dopants in CeO2 play essential roles in enhancing the activities of Ni + Fe doped samples.

In situ synthesis of tentacle-like NiC/Mo2C/NF nanorods array with excellent hydrogen evolution reaction at high current densities

The problem limiting the use of hydrogen evolution reactions in industry is the inability of electrocatalysts to operate stably at high current densities, so the development of stable and efficient electrocatalysts is important for hydrogen production by water splitting. By designing a rational interface engineering not only can the problem of limited number of catalytic sites in the catalyst be solved, but also can facilitate electron transfer, thus enhancing the efficiency of water splitting. Here, we designed a two-stage chemical vapour deposition method to construct NiC/Mo2C nanorod arrays on nickel foam to enhance the electrocatalytic ability of the catalysts, which exhibited efficient HER catalytic activity due to their special tentacle-like nanorod structure and abundant heterogeneous junction surfaces, which brought about abundant active sites as well as promoted electron transfer capability. The resulting catalysts provide current densities of 10, 100 and 500 mA cm-2 with overpotentials of 31, 153 and 264 mV, and exhibit excellent stability at current densities of 10 mA cm-2 for 200 h. This discovery provides a new idea for the rational design of catalysts with special morphologies.

The High Electrocatalytic Performance of NiFeSe/CFP for Hydrogen Evolution Reaction Derived from a Prussian Blue Analogue

Non-noble-metal-based chalcogenides are promising candidates for hydrogen evolution reaction (HER) by harnessing the architectural design and the synergistic effect between the elements. Herein, a porous bimetallic selenide (NiFeSe) nanocube deposited on carbon fiber paper (NiFeSe/CFP) was synthesized through a facile selenization reaction based on Prussian blue analogues (PBAs) as precursors. The NiFeSe/CFP exhibited excellent HER activity with an overpotential of just 186 mV for a current density of 10 mA cm−2 in 1.0 M KOH at ambient temperature, similar to most of the state-of-the-art transition metal chalcogenides. The corresponding Tafel slope was calculated to be 52 mV dec−1, indicating fast discharge of the proton during the HER. Furthermore, the catalyst could endure long-term catalytic tests and showed remarkable durability. The enhanced electrocatalytic performance of NiFeSe/CFP is attributed to the unique 3D porous configuration inherited from the PBA templates, enhanced charge transfer occurring at the heterogeneous interface due to the synergistic effect between the bimetallic phases, and the high conductivity improved by the formation of amorphous carbon shells during the selenization. These findings prove that the combination of inexpensive metal–organic framework precursors and hybrid metallic compounds is a feasible way to realize the performance enhancement of non-noble-metal-based chalcogenides towards alkaline HER.

Coupling Fe3 C Nanoparticles and N-Doping on Wood-Derived Carbon to Construct Reversible Cathode for Zn-Air Batteries

Electrochemical reduction of oxygen plays a critical role in emerging electrochemical energy technologies. Multiple electron transfer processes, involving adsorption and activation of O₂ and generation of protons from water molecules, cause the sluggish kinetics of the oxygen reduction reaction (ORR). Herein, a double-active-site catalyst of Fe₃ C nanoparticles coupled to paulownia wood-derived N-doped carbon (Fe₃ C@NPW) is fabricated via an active-site-uniting strategy. One site on Fe₃ C nanoparticles contributes to activating water molecules, while another site on N-doped carbon is responsible for activating oxygen molecules. Benefiting from the synergistic effect of double active sites, Fe₃ C@NPW delivers a remarkable catalytic activity for ORR with a half-wave potential of 0.87 V (vs. RHE) in alkaline electrolyte, outperforming commercial Pt/C catalyst. Moreover, zinc-air batteries (ZABs) assembled with Fe₃ C@NPW as a catalyst on cathode achieve a large specific capacity of 804.4 mA h g_Zn^-1 and a long-term stability of 780 cycles. The model solid-state ZABs also display satisfactory performances with an open-circuit voltage of 1.39 V and a high peak power density of 78 mW cm^-2 . These outstanding performances reach the level of first-rank among the non-noble metal electrode materials. This work offers a promising approach to creating double-active-site catalysts by the active-site-uniting strategy for energy conversion fields.

Synergistically Coupling P-doped Mo2C@N, P Dual-coped Carbon-nanoribbons as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

Developing non-noble and high-performance electrocatalysts towards hydrogen evolution reaction (HER) in both acidic and alkaline medium remains a stern challenge. Herein, the composite of P-doped Mo2C and hierarchically ultrathin N,...

Earth-Abundant Electrocatalysts for Water Splitting: Current and Future Directions

Of all the available resources given to mankind, the sunlight is perhaps the most abundant renewable energy resource, providing more than enough energy on earth to satisfy all the needs of humanity for several hundred years. Therefore, it is transient and sporadic that poses issues with how the energy can be harvested and processed when the sun does not shine. Scientists assume that electro/photoelectrochemical devices used for water splitting into hydrogen and oxygen may have one solution to solve this hindrance. Water electrolysis-generated hydrogen is an optimal energy carrier to store these forms of energy on scalable levels because the energy density is high, and no air pollution or toxic gas is released into the environment after combustion. However, in order to adopt these devices for readily use, they have to be low-cost for manufacturing and operation. It is thus crucial to develop electrocatalysts for water splitting based on low-cost and land-rich elements. In this review, I will summarize current advances in the synthesis of low-cost earth-abundant electrocatalysts for overall water splitting, with a particular focus on how to be linked with photoelectrocatalytic water splitting devices. The major obstacles that persist in designing these devices. The potential future developments in the production of efficient electrocatalysts for water electrolysis are also described.

Surface and Interface Engineering: Molybdenum Carbide-Based Nanomaterials for Electrochemical Energy Conversion

Molybdenum carbide (Mo_x C)-based nanomaterials have shown competitive performances for energy conversion applications based on their unique physicochemical properties. A large surface area and proper surface atomic configuration are essential to explore potentiality of Mo_x C in electrochemical applications. Although considerable efforts are made on the development of advanced Mo_x C-based catalysts for energy conversion with high efficiency and stability, some urgent issues, such as low electronic conductivity, low catalytic efficiency, and structural instability, have to be resolved in accordance with their application environments. Surface and interface engineering have shown bright prospects to construct highly efficient Mo_x C-based electrocatalysts for energy conversion including the hydrogen evolution reaction, oxygen evolution reaction, nitrogen reduction reaction, and carbon dioxide reduction reaction. In this Review, the recent progresses in terms of surface and interface engineering of Mo_x C-based electrocatalytic materials are summarized, including the increased number of active sites by decreasing the particle size or introducing porous or hierarchical structures and surface modification by introducing heteroatom(s), defects, carbon materials, and others electronic conductive species. Finally, the challenges and prospects for energy conversion on Mo_x C-based nanomaterials are discussed in terms of key performance parameters for the catalytic performance.

Heterogeneous Co–CN nanofibers with controlled active terminal N sites for hydrogen evolution reaction

The terminal N sites derived from the thermal fusion process exhibit excellent performance for hydrogen evolution reaction.

Interfacial Engineering of Bimetallic Carbide and Cobalt Encapsulated in Nitrogen-Doped Carbon Nanotubes for Electrocatalytic Oxygen Reduction

Heterojunction engineering is a fundamental strategy to develop efficient electrocatalysts for the oxygen reduction reaction by tuning electronic properties through interfacial cooperation. In this study, a heterojunction electrocatalyst consisting of bimetallic carbide Co₃ ZnC and cobalt encapsulated within N-doped carbon nanotubes (Co₃ ZnC/Co@NCNTs) is synthesized by a facile two-step ion exchange-thermolysis pathway. Co₃ ZnC/Co@NCNTs effectively promotes interfacial charge transport between the different components with optimizes adsorption and desorption of intermediate products at the heterointerface. In situ-grown N-doped carbon nanotubes (NCNTs) not only improve the electrical conductivity but also suppress the oxidation of transition metal nanoparticles in alkaline media. Moreover, the abundant nitrogen types (pyridinic N, Co-N_x , and graphitic nitrogen) in the carbon skeleton provide more active sites for oxygen adsorption. Benefitting from this optimized structure, Co₃ ZnC/Co@NCNTs hybrid not only demonstrates excellent oxygen reduction activity, with a half-wave potential of 0.83 V and fast mass transport with limited current density of 6.23 mA cm^-2 , but also exhibits superior stability and methanol tolerance, which surpass those of commercial Pt/C catalysts. This work provides an effective heterostructure for interfacial electronic modulation to improve electrocatalytic performance.

Targeted Assembly of Ultrathin NiO/MoS2 Electrodes for Electrocatalytic Hydrogen Evolution in Alkaline Electrolyte

The development of non-noble metal catalysts for hydrogen revolution in alkaline media is highly desirable, but remains a great challenge. Herein, synergetic ultrathin NiO/MoS₂ catalysts were prepared to improve the sluggish water dissociation step for HER in alkaline conditions. With traditional electrode assembly methods, MoS₂:NiO-3:1 exhibited the best catalytic performance; an overpotential of 158 mV was required to achieve a current density of 10 mA/cm². Further, a synergetic ultrathin NiO/MoS₂/nickel foam (NF) electrode was assembled by electrophoretic deposition (EPD) and post-processing reactions. The electrode displayed higher electrocatalytic ability and stability, and an overpotential of only 121 mV was needed to achieve a current density of 10 mA/cm². The improvement was ascribed to the better catalytic environment, rather than a larger active surface area, a higher density of exposed active sites or other factors. DFT calculations indicated that the hybrid NiO/MoS₂ heterostuctured interface is advantageous for the enhanced water dissociation step and the corresponding lower kinetic energy barrier—from 1.53 to 0.81 eV.

Hierarchical Porous Molybdenum Carbide Based Nanomaterials for Electrocatalytic Hydrogen Production

The electrocatalytic hydrogen evolution reaction (HER) for the preparation of hydrogen fuel is a very promising technology to solve the shortage of hydrogen storage. However, in practical applications, HER catalysts with excellent performance and moderate price are very rare. Molybdenum carbide (Mo_xC) has attracted extensive attention due to its electronic structure and natural abundance. Here, a comprehensive review of the preparation and performance control of hierarchical porous molybdenum carbide (HP-Mo_xC) based catalysts is summarized. The methods for preparing hierarchical porous materials and the regulation of their HER performance are mainly described. Briefly, the HP-Mo_xC based catalysts were prepared by template method, morphology-conserved transformations method, and secondary conversion method of an organic-inorganic hybrid material. The intrinsic HER kinetics are enhanced by the introduction of a carbon-based support, heteroatom doping, and the construction of a heterostructure. Finally, the future development of HP-Mo_xC based catalysts is prospected in this review.

Atomic layer deposition of Pd nanoparticles on self-supported carbon-Ni/NiO-Pd nanofiber electrodes for electrochemical hydrogen and oxygen evolution reactions

The most critical challenge in hydrogen fuel production is to develop efficient, eco-friendly, low-cost electrocatalysts for water splitting. In this study, self-supported carbon nanofiber (CNF) electrodes decorated with nickel/nickel oxide (Ni/NiO) and palladium (Pd) nanoparticles (NPs) were prepared by combining electrospinning, peroxidation, and thermal carbonation with atomic layer deposition (ALD), and then employed for hydrogen evolution and oxygen evolution reactions (HER/OER). The best CNF-Ni/NiO-Pd electrode displayed the lowest overpotential (63 mV and 1.6 V at j = 10 mA cm^-2), a remarkably small Tafel slope (72 and 272 mV dec^-1), and consequent exchange current density (1.15 and 22.4 mA cm^-2) during HER and OER, respectively. The high chemical stability and improved electrocatalytic performance of the prepared electrodes can be explained by CNF functionalization via Ni/NiO NP encapsulation, the formation of graphitic layers that cover and protect the Ni/NiO NPs from corrosion, and ALD of Pd NPs at the surface of the self-supported CNF-Ni/NiO electrodes.

Immobilization of Ni3Co Nanoparticles into N-Doped Carbon Nanotube/Nanofiber Integrated Hierarchically Branched Architectures toward Efficient Overall Water Splitting

Exploring cost-effective and high-performance bifunctional electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of paramount importance for the advancement of H2 production technology, yet remains a huge challenge. Herein, a simple electrospinning-pyrolysis strategy is developed to directly immobilize uniform Ni3Co nanoparticles into a hierarchical branched architecture constructed by in situ formed N-doped carbon-nanotube-grafted carbon nanofibers. The elaborate construction of such hybrid hierarchical architecture can effectively modulate the electronic structure of the active sites, enlarge the exposure of active sites, and facilitate the electron transfer and mass diffusion, favoring both the HER and OER. As a result, the optimized catalyst requires relatively low overpotentials of 114 and 243 mV for HER and OER, respectively, to deliver a current density of 10 mA cm-2 in 0.1 m KOH electrolyte. When employed as a bifunctional catalyst for overall water splitting, the resultant catalyst shows a low cell voltage of 1.57 V to achieve a current density of 10 mA cm-2, along with an impressive stability without noticeable attenuation even after 27 h. This work presents a successful demonstration in optimizing the electrocatalytic performance of Ni-based bifunctional electrocatalysts by simultaneously considering modulation of electronic structure, hybridization with carbon substrate, and nanostructuring through a facile synthetic strategy, which provides a new avenue to the design of a rich variety of robust transition-metal-based electrocatalysts for large-scale water electrolysis.

Controllable Co@N-doped graphene anchored onto the NRGO toward electrocatalytic hydrogen evolution at all pH values

We propose a synthetic strategy to synthesize cobalt nanoparticle cores encapsulated in tunable N-doped graphene shells on N-doped reduced graphene oxide as a highly efficient and stable pH-universal electrocatalyst. The superior performance is mainly attributed to the optimization of the electrocatalytic centre and the improvement of the electronic configuration.

Iron Carbides: Control Synthesis and Catalytic Applications in COx Hydrogenation and Electrochemical HER

Catalytic transformation of CO_x (x = 1, 2) with renewable H₂ into valuable fuels and chemicals provides practical processes to mitigate the worldwide energy crisis. Fe-based catalytic materials are widely used for those reactions due to their abundance and low cost. Novel iron carbides are particularly promising catalytic materials among the reported ferrous catalysts. Recently, a series of strategies has been developed for the preparation of iron carbide nanoparticles and their nanocomposites. Control synthesis of FeC_x -based nanomaterials and their catalytic applications in CO_x hydrogenation and electrochemical hydrogen evolution reaction (HER) are reviewed. The discussion is focused on the unique catalytic activities of iron carbides in CO_x hydrogenation and HER and the correlation between structure and catalytic performance. Future synthesis and potential catalytic applications of iron carbides are also summarized.

Enteromorpha prolifera-derived Fe3C/C composite as advanced catalyst for hydroxyl radical generation and efficient removal for organic dye and antibiotic

Enteromorpha prolifera-derived Fe₃C/C composite has been fabricated through a facile one-step calcination method. As an advanced Fenton-like catalyst, the obtained Fe₃C/C composite displayed high catalytic reactivity to generate hydroxyl radicals. It is worth to note that the removal rate of methylene blue (MB) could effectively reach 100% in a wide pH range (pH = 2˜12) and the maximum degradation capacity of the composite is 660 mg/g. The stability and reusability of Fe₃C/C composite catalyst have also been tested, which could remain the removal rate at 100% after 6 consecutive runs. To illustrate the practical application possibility, the Fe₃C/C composite catalyst was used for degradation of papermaking and dyeing waste water, which could reduce the COD (chemical oxygen demand) value to less than 50. Additionally, the antibiotic norfloxacin (NOR) could also be catalytically removed by the Fe₃C/C composite and the possible removal pathway has also been proposed. The excellent removal performance of Fe₃C/C composite for MB and NOR may be attributed to the synergistic effect between porous carbon adsorption and Fe₃C catalysis. This study not only provides novel insights into recycling of waste biomass, but also paves a new way for the application of Fe₃C/C in dyes and antibiotics waste water treatment areas.

Fabrication of C/Co-FeS2/CoS2 with Highly Efficient Hydrogen Evolution Reaction

The mainstream strategy for designing hydrogen electrocatalysts is to adjust their surface electronic structure; however, the conductivity of the electrocatalyst and the synergy with its substrate are still challenges to overcome. In this work, we report a carbon-doped Co-FeS2/CoS2 (C/Co-FeS2/CoS2) electrode, prepared via a hydrothermal process with carbon cloth (CC) as the substrate and carbon doping. The C/Co-FeS2/CoS2 electrode shows excellent catalytic activity in the hydrogen evolution reaction (HER) with an overpotential of 88 mV at a current density of −10 mA∙cm−2 in 0.5 M H2SO4 solution. The Tafel slope is 66 mV∙dec−1. Such superior performance is attributed to the high electrical conductivity of the electrocatalyst and its synergy with the substrate. Our study provides an efficient alternative in the field of electrocatalysis.

Tunable engineering hollow carbon nanomaterial served as an excellent catalyst for oxygen reduction reaction and hydrogen evolution reaction

Fe and N functionalized hollow carbon spheres (Fe/N-HCS) with hierarchically porous structure are constructed. Remarkably, it is discovered that the pyrolysis temperature effects the chemical composition intensively. At 800 °C, only graphitic-N and oxidized-N are formed for all as-prepared samples. The surface area and pores can be precisely tuned, the surface area of all Fe/N-HCS samples is more than 500  m² g^-1 benefiting from the porous hollow structure. Thus, the optimized Fe/N-HCS exhibits excellent oxygen reduction reaction performance in term of onset potential (1.00 V vs. RHE), half-wave potential (0.87 V vs. RHE), good stability as well as methanol tolerance for oxygen reduction reaction, even surpassing the Pt in alkaline condition and more competitive in acidic condition; Furthermore, the optimized Fe/N-HCS displays better hydrogen evolution reaction activity in acidic condition with onset overpotential of 40 mV and overpotential to deliver 10 mA cm^-2 at 170 mV, indicating better active. It is found that Fe/N-HCS improve the hydrogen evolution reaction activity after electrodeposition trace quantity of Pt, which shows 170 mV of overpotential to deliver 100 mA cm^-2. X-ray photoelectron spectroscopy result indicates the loading of Pt is roughly 0.11 at%, thus, the improved performance is basically due to the synergistic effect between Pt and Fe/N-HCS.

A substrate-free Mo2C-based electrocatalyst by facile glucose-blowing for efficient hydrogen production

A catalyst Gb-Mo2C@PC, in which molybdenum carbides nanoparticles embedded into the 3D self-supported porous graphene shells, was reported. Gb-Mo2C@PC exhibits good HER performance in basic and acid electrolyte.

A universal and controllable strategy of constructing transition-metal nitride heterostructures for highly enhanced bifunctional electrocatalysis

A family of transition-metal nitride heterostructures were synthesized by a universal and controllable method to remedy the drawbacks of ordinary bifunctional electrocatalysts.

Structural Design and Electronic Modulation of Transition-Metal-Carbide Electrocatalysts toward Efficient Hydrogen Evolution

As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost-efficient electrocatalysts. Over the past years, there is a rapid rise in noble-metal-free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble-metal-like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon-based hybrids are introduced to increase active-site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.

Advanced electrospun nanomaterials for highly efficient electrocatalysis

We highlight the recent developments of electrospun nanomaterials with controlled morphology, composition and architecture for highly efficient electrocatalysis.

A Novel Bimetallic Nickel-Molybdenum Carbide Nanowire Array for Efficient Hydrogen Evolution

The design and fabrication of noble-metal-free hydrogenevolution electrocatalysts with high activity is significant to future renewable energy systems. In this work, self-supported NiMo carbide nanowires on carbon cloth (Ni₃ Mo₃ C@NPC NWs/CC; NPC=N,P-doped carbon) were developed through an electropolymerization-assisted procedure. During the synthesis process, NiMoO₄ nanowires were first grown on CC through a hydrothermal reaction that was free of any polymer binder such as Nafion. By use of electropolymerization, the as-prepared NiMoO₄ NWs/CC sample was then coated by a layer of polypyrole (PPy) that served as the carbon source for subsequent conversion into Ni₃ Mo₃ C@NPC NWs/CC by carbothermal reduction. The experimental results indicated that judicious choices of the amount of coated PPy and the pyrolysis temperature were essential for obtaining the pure-phase, nanowire array structure of Ni₃ Mo₃ C@NPC NWs/CC. Benefitting from the pure phase of the bimetallic carbide, the unique architecture of the nanowire array, and its self-supported nature, the optimized Ni₃ Mo₃ C@NPC NWs/CC electrode exhibited excellent performance in the hydrogen evolution reaction (HER) in both acidic and alkaline media. Low overpotentials of 161 and 215 mV were required to afford a high current density of 100 mA cm^-2 toward the HER in acidic and alkaline media, respectively, and the catalytic activity was maintained for at least 48 h, which puts Ni₃ Mo₃ C@NPC NWs/CC among the best HER electrocatalysts based on metallic carbides yet reported.

Stable and Efficient Nitrogen-Containing Carbon-Based Electrocatalysts for Reactions in Energy-Conversion Systems

High activity and stability are crucial for the practical use of electrocatalysts in fuel cells, metal-air batteries, and water electrolysis, including the oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, and oxidation reactions of formic acid and alcohols. Electrocatalysts based on nitrogen-containing carbon (N-C) materials show promise in catalyzing these reactions; however, there is no systematic review of strategies for the engineering of active and stable N-C-based electrocatalysts. Herein, a comprehensive comparison of recently reported N-C-based electrocatalysts regarding both electrocatalytic activity and long-term stability is presented. In the first part of this review, the relationships between the electrocatalytic reactions and selection of the element to modify the N-C-based materials are discussed. Afterwards, synthesis methods for N-C-based electrocatalysts are summarized, and strategies for the synthesis of highly stable N-C-based electrocatalysts are presented. Multiple tables containing data on crucial parameters for both electrocatalytic activity and stability are displayed in this review. Finally, constructing M-N_x moieties is proposed as the most promising engineering strategy for stable N-C-based electrocatalysts.

Molybdenum Carbide Nanoparticles Coated into the Graphene Wrapping N-Doped Porous Carbon Microspheres for Highly Efficient Electrocatalytic Hydrogen Evolution Both in Acidic and Alkaline Media

Molybdenum carbide (Mo2C) is recognized as an alternative electrocatalyst to noble metal for the hydrogen evolution reaction (HER). Herein, a facile, low cost, and scalable method is provided for the fabrication of Mo2C-based eletrocatalyst (Mo2C/G-NCS) by a spray-drying, and followed by annealing. As-prepared Mo2C/G-NCS electrocatalyst displays that ultrafine Mo2C nanopartilces are uniformly embedded into graphene wrapping N-doped porous carbon microspheres derived from chitosan. Such designed structure offer several favorable features for hydrogen evolution application: 1) the ultrasmall size of Mo2C affords a large exposed active sites; 2) graphene-wrapping ensures great electrical conductivity; 3) porous structure increases the electrolyte-electrode contact points and lowers the charge transfer resistance; 4) N-dopant interacts with H+ better than C atoms and favorably modifies the electronic structures of adjacent Mo and C atoms. As a result, the Mo2C/G-NCS demonstrates superior HER activity with a very low overpotential of 70 or 66 mV to achieve current density of 10 mA cm-2, small Tafel slope of 39 or 37 mV dec-1, respectively, in acidic and alkaline media, and high stability, indicating that it is a great potential candidate as HER electrocatalyst.

Rational design of atomically dispersed nickel active sites in β-Mo2C for the hydrogen evolution reaction at all pH values

Atomically dispersed Ni in β-Mo₂C (Ni/β-Mo₂C) is designed as an efficient catalyst for the HER at all pH values. The remarkable electrochemical properties of Ni/β-Mo₂C are mainly attributed to the synergistic effect between atomically dispersed Ni species and β-Mo₂C.

Fabrication of Pt nanoparticles on nitrogen-doped carbon/Ni nanofibers for improved hydrogen evolution activity

Among various methods for acquiring hydrogen fuel, electrocatalytic water splitting is considered to be as one of the most efficient and promising approaches. Pt is regarded as the best electrocatalyst for the hydrogen evolution reaction (HER) during water splitting process, however, the scarcity and costliness of Pt restrict the large-scale practical application. On the other hand, transition metal Ni is abundant in earth and exhibits favorable HER catalytic activity theoretically. In this work, we have demonstrated a facile electrospinning combined with calcination and chemical reduction processes to fabricate Pt nanoparticles loaded on nitrogen-doped carbon/Ni nanofibers (Ni-NCNFs-Pt) as efficient HER electrocatalysts. The as-prepared Ni-NCNFs-Pt not only reduced the usage of noble metal Pt but also revealed an excellent electrochemical activity at all values of pH, including the smaller overpotentials of 47, 22 and 84 mV (at j = 10 mA cm^-2) in 0.5 M H₂SO₄, 1 M KOH and 0.1 M phosphate buffer solution, respectively. In addition, Ni-NCNFs-Pt nanocatalyst displayed an extraordinary low Tafel slope and long durability over a wide range of pH. The remarkable HER performance could be ascribed to the increased electrochemical active surface area through the introduction of Ni nanoparticles, synergistic interactions between Ni and Pt nanoparticles and the introduction of the conductive nitrogen-doped carbon nanofibers (NCNFs) substrate which facilitated the fast electron transport. This investigation provides a potential route to construct efficient and low cost HER electrocatalysts with promising practical applications in renewable energy conversion and storage devices.

Phase transition and in situ construction of lateral heterostructure of 2D superconducting α/β Mo2C with sharp interface by electron beam irradiation

Lateral heterostructures of 2D materials have several interesting properties and potential applications, and they are usually fabricated by chemical vapor deposition. However, it still remains a great challenge to fabricate 2D lateral heterostructures with well-controlled patterns and sharp interfaces. Herein, we found that the 2D α-Mo₂C crystal, a recently emerging 2D superconductor, experiences a phase transition from the α phase to β phase on electron beam irradiation in a transmission electron microscope because of the migration of carbon atoms among the molybdenum octahedrons. Combined with first-principles calculations, the carbon atom migration paths and the corresponding energy barriers were discussed. Utilizing this unique phase transition property of 2D α-Mo₂C crystal, we demonstrated the precise in situ construction of the lateral heterostructure of 2D superconducting α/β Mo₂C with a well-controlled pattern and sharp interface using advanced aberration-corrected scanning transmission electron microscopy.