Oxygen-Defect-Rich Cobalt Ferrite Nanoparticles for Practical Water Electrolysis with High Activity and Durability

Sodium Tartrate-Assisted Synthesis of High-Purity NiFe2O4 Nano-Microrods Supported by Porous Ketjenblack Carbon for Efficient Alkaline Oxygen Evolution

Herein, a simple two-step synthetic method was developed for the synthesis of NiFe₂O₄ nano-microrods supported on Ketjenblack carbon (NiFe₂O₄/KB). A sodium tartrate-assisted hydrothermal method was employed for the synthesis of a NiFe-MOF/KB precursor, which was then pyrolyzed under N₂ at 500 °C to yield NiFe₂O₄/KB. Benefiting from the presence of high-valence Ni³⁺ and Fe³⁺, high conductivity, and a large electrochemically active surface area, NiFe₂O₄/KB delivered outstanding OER electrocatalytic performance under alkaline conditions, including a very low overpotential of 258 mV (vs RHE) at 10 mA cm^-2, a small Tafel slope of 43.01 mV dec^-1, and excellent durability in 1.0 M KOH. Density functional theory calculations verified the superior alkaline OER electrocatalytic activity of NiFe₂O₄ to IrO₂. While both catalysts possessed a similar metallic ground state, NiFe₂O₄ offered a lower energy barrier in the rate-determining OER step (*OOH → O₂) compared to IrO₂, resulting in faster OER kinetics.

Engineering Coupled NiSx -WO2.9 Heterostructure as pH-Universal Electrocatalyst for Hydrogen Evolution Reaction

Exploiting highly active and low-cost materials as pH-universal electrocatalysts for the hydrogen evolution reaction (HER) and achieving high-purity hydrogen fuel is highly desirable but remains challenging. Herein, a novel type of coupled heterostructure was designed by simple electrodeposition followed by a sulfurization treatment. This hierarchical structure was composed of nickel sulfides (NiS, NiS₂ , denoted as NiS_x ) and oxygen-deficient tungsten oxide (WO_2.9 ), which was directly grown on nickel foam (NF) as self-supporting electrodes (NiS_x -WO_2.9 /NF) for HER over a wide pH range. The systematic experimental characterizations confirmed that the material had abundant catalytic active sites, fast interfacial electron transfer ability, and strong electronic interaction, resulting in the optimized reaction kinetics for HER. Consequently, the NiS_x -WO_2.9 /NF catalyst required low overpotentials of 96 and 117 mV to reach current densities of 50 and 100 mA cm^-2 in an alkaline medium, outperforming most of the reported non-noble metal-based materials. Moreover, this self-supported electrode exhibited impressive performance over a wide pH range, only requiring 220 and 304 mV overpotential at 100 mA cm^-2 in 0.5 m H₂ SO₄ and 1 m phosphate-buffered saline electrolytes. This work may offer a new approach to the development of advanced pH-universal electrodes for hydrogen production.

Recent Progress on Bimetallic-Based Spinels as Electrocatalysts for the Oxygen Evolution Reaction

Electrocatalytic water splitting is a promising and viable technology to produce clean, sustainable, and storable hydrogen as an energy carrier. However, to meet the ever-increasing global energy demand, it is imperative to develop high-performance non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER), as the OER is considered the bottleneck for electrocatalytic water splitting. Spinels, in particular, are considered promising OER electrocatalysts due to their unique properties, precise structures, and compositions. Herein, the recent progress on the application of bimetallic-based spinels (AFe₂ O₄ , ACo₂ O₄ , and AMn₂ O₄ ; where A = Ni, Co, Cu, Mn, and Zn) as electrocatalysts for the OER is presented. The fundamental concepts of the OER are highlighted after which the family of spinels, their general formula, and classifications are introduced. This is followed by an overview of the various classifications of bimetallic-based spinels and their recent developments and applications as OER electrocatalysts, with special emphasis on enhancing strategies that have been formulated to improve the OER performance of these spinels. In conclusion, this review summarizes all studies mentioned therein and provides the challenges and future perspectives for bimetallic-based spinel OER electrocatalysts.

The Perfect Imperfections in Electrocatalysts

Modern day electrochemical devices find applications in a wide range of industrial sectors, from consumer electronics, renewable energy management to pollution control by electric vehicles and reduction of greenhouse gas. There has been a surge of diverse electrochemical systems which are to be scaled up from the lab-scale to industry sectors. To achieve the targets, the electrocatalysts are continuously upgraded to meet the required device efficiency at a low cost, increased lifetime and performance. An atomic scale understanding is however important for meeting the objectives. Transitioning from the bulk to the nanoscale regime of the electrocatalysts, the existence of defects and interfaces is almost inevitable, significantly impacting (augmenting) the material properties and the catalytic performance. The intrinsic defects alter the electronic structure of the nanostructured catalysts, thereby boosting the performance of metal-ion batteries, metal-air batteries, supercapacitors, fuel cells, water electrolyzers etc. This account presents our findings on the methods to introduce measured imperfections in the nanomaterials and the impact of these atomic-scale irregularities on the activity for three major reactions, oxygen evolution reaction (OER), oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER). Grain boundary (GB) modulation of the (ABO₃ )_n type perovskite oxide by noble metal doping is a propitious route to enhance the OER/ORR bifunctionality for zinc-air battery (ZAB). The perovskite oxides can be tuned by calcination at different temperatures to alter the oxygen vacancy, GB fraction and overall reactivity. The oxygen defects, unsaturated coordination environment and GBs can turn a relatively less active nanostructure into an efficient redox active catalyst by imbibing plenty of electrochemically active sites. Obviously, the crystalline GB interface is a prerequisite for effective electron flow, which is also applicable for the crystalline surface oxide shell on metal alloy core of the nanoparticles (NPs). The oxygen vacancy of two-dimensional (2D) perovskite oxide can be made reversible by the A-site termination of the nanosheets, facilitating the reversible entry and exit of a secondary phase during the redox processes. In several instances, the secondary phases have been observed to introduce the right proportion of structural defects and orbital occupancies for adsorption and desorption of reaction intermediates. Also, heterogeneous interfaces can be created by wrapping the perovskite oxide with negatively charged surface by layered double hydroxide (LDH) can promote the OER process. In another approach, ion intercalation at the 2D heterointerfaces steers the interlayer spacing that can influence the mass diffusion. Similar to anion vacancy, controlled formation of the cation vacancies can be achieved by exsolving the B-site cations of perovskite oxides to surface anchored catalytically active metal/alloy NPs. In case of the alloy electrocatalysts, incomplete solid solution by two or more mutually immiscible metals results in heterogeneous alloys having differently exposed facets with complementary functionalities. From the future perspective, new categories of defect structures including the 2D empty spaces or voids leading to undercoordinated sites, the multiple interfaces in heterogeneous alloys, antisite defects between anions and cations, and the defect induced inverse charge transfer should bring new dimensionalities to this riveting area of research.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Ruthenium nanoparticles integrated bimetallic metal-organic framework electrocatalysts for multifunctional electrode materials and practical water electrolysis in seawater

There is still a significant technical hurdle in the integration of better electrocatalysts with coordinated functional units and morphological integrity that improves reversible electrochemical activity, electrical conductivity, and mass transport capabilities. In this work, ruthenium-integrating porous bimetallic transition metal nanoarrays are efficiently generated from metal-organic framework-covered three-dimensional platforms such as carbon cloth using a simple solution-based deposition technique followed by calcination. Heterostructure ruthenium-cobalt-iron hollow nanoarrays are built to permit exceptionally effective multifunctional activities in reactions including the oxygen evolution reaction, hydrogen evolution reaction, and oxygen reduction reaction. As presumed, the as-synthesized porous nanostructured arrays show remarkable electrochemical performance due to the benefits of copious active reaction sites, and efficient electron and ion transport channels. The oxygen reduction reaction of the porous nanostructured array electrocatalyst has a half-wave potential of 0.875 V vs. reversible hydrogen electrode and can achieve a current density of 10 mA cm^-2 at low overpotentials of 220 and 50 mV for the oxygen and hydrogen evolution reactions, respectively, and the needed cell voltage for total water splitting is just 1.49 V at a current density of 10 mA cm^-2. The fabricated electrolyzer coupling splits seawater at relatively low cell voltages of 1.54 V at ambient temperature.

Visible Light-Driven Highly Selective CO2 Reduction to CH4 Using Potassium-Doped g-C3N5

Establishment of an efficient and robust artificial photocatalytic system to convert solar energy into chemical fuels through CO₂ conversion is a cherished goal in the fields of clean energy and environmental protection. In this work, we have explored an emergent low-Z nitrogen-rich carbon nitride material g-C₃N₅ (analogue of g-C₃N₄) for CO₂ conversion under visible light illumination. A significant enhancement of the CH₄ production rate was detected for g-C₃N₅ in comparison to that of g-C₃N₄. Notably, g-C₃N₅ also showed a very impressive selectivity of 100% toward CH₄ as compared to 21% for g-C₃N₄. The photocatalytic CO₂ conversion was performed without using sacrificial reagents. We found that 1% K doping in g-C₃N₅ enhanced its performance even further without compromising the selectivity. Moreover, 1% K-doped g-C₃N₅ also exhibited better photostability than undoped g-C₃N_5. We have also employed density functional theory calculation-based analyses to understand and elucidate the possible reasons for the better photocatalytic performance of K-doped g-C₃N₅.

Nickel Boride/Boron Carbide Particles Embedded in Boron-Doped Phenolic Resin-Derived Carbon Coating on Nickel Foam for Oxygen Evolution Catalysis in Water and Seawater Splitting

Electrolysis of seawater can be a promising technology, but chloride ions in seawater can lead to adverse side reactions and the corrosion of electrodes. A new transition metal boride-based self-supported electrocatalyst was prepared for efficient seawater electrolysis by directly soaking nickel foam (NF) in a mixture of phenolic resin (PR) and boron carbide (B₄ C), followed by an 800 °C annealing. During PR carbonization process, the reaction of B₄ C and NF generated nickel boride (Ni_x B) with high catalytic activity, while PR-derived carbon coating was doped with boron atoms from B₄ C (B-C_PR ). The B-C_PR coating fixed Ni_x B/B₄ C particles in the frames and holes to improve the space utilization of NF. Meanwhile, the B-C_PR coating effectively protected the catalyst from the corrosion by seawater and facilitates the transport of electrons. The optimal Ni_x B/B₄ C/B-C_PR /NF required 1.50 and 1.58 V to deliver 100 and 500 mA cm^-2 , respectively, in alkaline natural seawater for the oxygen evolution reaction.

Microwave-Assisted Auto-Combustion Synthesis of Binary/Ternary Co x Ni1-x Ferrite for Electrochemical Hydrogen and Oxygen Evolution

Enormous efforts have been dedicated to engineering low-cost and efficient electrocatalysts for both hydrogen evolution and oxygen evolution reactions (HER and OER, respectively). For this, the current contribution reports the successful synthesis of binary/ternary metal ferrites (Co x Ni1-x Ferrite; x = 0.0, 0.1, 0.3, 0.5, 0.7, and 1.0) by a simple one-step microwave technique and subsequently discusses its chemical and electrochemical properties. The X-ray diffraction analysis substantiated the phase purity of the as-obtained catalysts with various compositions. Additionally, the morphology of the nanoparticles was identified via transmission electron microscopy. Further, the vibrating sample magnetometer justified the ferromagnetic character of the as-prepared products. The electrochemical measurements revealed that the as-prepared materials required the overpotentials of 422-600 and 419-467 mV for HER and OER, respectively, to afford current densities of 10 mA cm-2. In the general sense, Ni cation substitution with Co influenced favorably toward both HER and OER. Among all synthesized electrocatalysts, Co0.9Ni0.1Ferrite displayed the highest performance in terms of OER in 1 M KOH solution, which is related to the synergistic effect of multiple parameters including the optimal substitution amount of Co, the highest Brunauer-Emmett-Teller surface area, the smallest particle size among all samples (26.71 nm), and the lowest charge transfer resistance. The successful synthesis of ternary ferrites carried out for the first time via a microwave-assisted auto-combustion route opens up a new path for their applications in renewable energy technologies.

Spinel ferrites (MFe2O4): Synthesis, improvement and catalytic application in environment and energy field

To develop efficient catalysts is one of the major ways to solve the energy and environmental problems. Spinel ferrites, with the general chemical formula of MFe₂O₄ (where M = Mg²⁺, Co²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Mn²⁺, etc.), have attracted considerable attention in catalytic research. The flexible position and valence variability of metal cations endow spinel ferrites with diverse physicochemical properties, such as abundant surface active sites, high catalytic activity and easy to be modified. Meanwhile, their unique advantages in regenerating and recycling on account of the magnetic performances facilitate their practical application potential. Herein, the conventional as well as green chemistry synthesis of spinel ferrites is reviewed. Most importantly, the critical pathways to improve the catalytic performance are discussed in detail, mainly covering selective doping, site substitution, structure reversal, defect introduction and coupled composites. Furthermore, the catalytic applications of spinel ferrites and their derivative composites are exclusively reviewed, including Fenton-type catalysis, photocatalysis, electrocatalysis and photoelectro-chemical catalysis. In addition, some vital remarks, including toxicity, recovery and reuse, are also covered. Future applications of spinel ferrites are envisioned focusing on environmental and energy issues, which will be pushed by the development of precise synthesis, skilled modification and advanced characterization along with emerging theoretical calculation.

In Situ Cation Intercalation in the Interlayer of Tungsten Sulfide with Overlaying Layered Double Hydroxide in a 2D Heterostructure for Facile Electrochemical Redox Activity

The role of electrochemical interfaces in energy conversion and storage is unprecedented and more so the interlayers of two-dimensional (2D) heterostructures, where the physicochemical nature of these interlayers can be adjusted by cation intercalation. We demonstrate in situ intercalation of Ni²⁺ and Co²⁺ with similar ionic radii of ∼0.07 nm in the interlayer of 1T-WS₂ while electrodepositing NiCo layered double hydroxide (NiCo-LDH) to create a 2D heterostructure. The extent of intercalation varies with the electrodeposition time. Electrodeposition for 90 s results in 22.4-nm-thick heterostructures, and charge transfer ensues from NiCo-LDH to 1T-WS₂, which stabilizes the higher oxidation states of Ni and Co. Density functional theory calculations validate the intercalation principle where the intercalated Ni and Co d electrons contribute to the density of states at the Fermi level of 1T-WS₂. Water electrolysis is taken as a representative redox process. The 90 s electrodeposited heterostructure needs the relatively lowest overpotentials of 134 ± 14 and 343 ± 4 mV for hydrogen and oxygen evolution reactions, respectively, to achieve a current density of ±10 mA/cm² along with exceptional durability for 60 h in 1 M potassium hydroxide. The electrochemical parameters are found to correlate with enhanced mass diffusion through the cation and Cl^--intercalated interlayer spacing of 1T-WS₂ and the number of active sites. While 1T-WS₂ is mostly celebrated as a HER catalyst in an acidic medium, with the help of intercalation chemistry, this work explores an unfound territory of this transition-metal dichalcogenide to catalyze both half-reactions of water electrolysis.

Self-assembled mesostructured Co0.5Fe2.5O4 nanoparticle superstructures for highly efficient oxygen evolution

Self-assembly of colloidal nanoparticles (NPs) into well-defined superstructures has been recognized as one of the most promising ways to fabricate rationally-designed functional materials for a variety of applications. Introducing hierarchical mesoporosity into NP superstructures will facilitate mass transport while simultaneously enhancing the accessibility of constituent NPs, which is of critical importance for widening their applications in catalysis and energy-related fields. Herein, we develop a colloidal co-assembly strategy to construct mesostructured, carbon-coated Co_0.5Fe_2.5O₄ NP superstructures (M-C@CFOSs), which show great promise as highly efficient electrocatalysts for the oxygen evolution reaction (OER). Specifically, organically-stabilized SiO₂ NPs are employed as both building blocks and sacrificial template, which co-assemble with Co_0.5Fe_2.5O₄ NPs to afford binary NP superstructures through a solvent drying process. M-C@CFOSs are obtainable after in situ ligand carbonization followed by the selective removal of SiO₂ NPs. The hierarchical mesoporous structure of M-C@CFOSs, combined with the conformal graphitic carbon coating derived from the native organic ligands, significantly improves their electrocatalytic performance as OER electrocatalysts when compared with nonporous Co_0.5Fe_2.5O₄ NP superstructures. This work establishes a new and facile approach for designing NP superstructures with hierarchical mesoporosity, which may find wide applications in energy storage and conversion.

Solvothermal phase change induced morphology transformation in CdS/CoFe2O4@Fe2O3 hierarchical nanosphere arrays as ternary heterojunction photoanodes for solar water splitting

The design of efficient heterojunction photoanodes with appropriate band alignment and ease of charge separation has been one of the most highly focused research areas in photoelectrodes.

Tailoring the synergistic dual-decoration of (Cu–Co) transition metal auxiliaries in Fe-oxide/zeolite composite catalyst for the direct conversion of syngas to aromatics

Tailoring the crystal lattice and multiple phase interfaces via the feasible accommodation of Cu–Co into the host (Fe) structure, expedited the surface oxygen vacancies that modulated the reduction/chemisorption behavior of active Fe species.