Adding to the Arsenal of Zirconium‐Based Metal–Organic Frameworks: the Topology as a Platform for Solvent‐Assisted Metal Incorporation

Role of Metal-Organic Framework Topology on Thermodynamics of Polyoxometalate Encapsulation

Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Bro̷nsted acidity, and high availability of active sites make them potent catalysts for oxidation reactions. Metal-organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, and Ka) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, and the) on POM encapsulation thermodynamics.

Interior and Exterior Surface Modification of Zr-Based Metal-Organic Frameworks for Trace Benzene Removal

The emission of volatile organic compounds (VOCs) significantly contributes to air pollution and poses a serious threat to human health. Benzene, one of the most toxic VOCs, is difficult for the human body to metabolize and is classified as a Group 1 carcinogen. The development of efficient adsorbents for removing trace amounts of benzene from ambient air is thus of great importance. In this work, we studied the benzene adsorption properties of four Zr-based metal-organic frameworks (Zr-MOFs) through static volumetric and dynamic breakthrough experiments. Two previously reported Zr-MOFs, BUT-12 and STA-26, were prepared with a tritopic carboxylic acid ligand (H3L1) functionalized with three methyl groups, and STA-26 is a 2-fold interpenetrated network of BUT-12. Two new isoreticular Zr-MOFs, BUT-12-Et and STA-26-Et, were synthesized using a similar ligand, H3L2, where the methyl groups are replaced with ethyl groups. There are mesopores in BUT-12 and BUT-12-Et and micropores in STA-26 and STA-26-Et. The four Zr-MOFs all showed high stability in liquid water and acidic aqueous solutions. The microporous STA-26 and STA-26-Et showed much higher benzene uptakes than mesoporous BUT-12 and BUT-12-Et at room temperature under low pressures. Particularly, the benzene adsorption capacity of STA-26-Et was high up to 2.21 mmol/g at P/P0 = 0.001 (P0 = 12.78 kPa), higher than those of the other three Zr-MOFs and most reported solid adsorbents. Breakthrough experiments confirmed that STA-26-Et could effectively capture trace benzene (10 ppm) from dry air; however, its benzene capture capacity was reduced by 90% under humid conditions (RH = 50%). Coating of the crystals of STA-26-Et with polydimethylsiloxane (PDMS) increased the hydrophobicity of the exterior MOF surfaces, leading to a more than 2-fold improvement in its benzene capture capacity in the breakthrough experiment under humid condition. PDMS coating of STA-26-Et likely slowed down the water adsorption process, and thus, the adsorbent afforded more efficient capture of benzene. This work demonstrates that modifying both the interior and exterior surfaces of MOFs can effectively enhance their performance in capturing trace benzene from ambient air, even under humid conditions. This finding is meaningful for the development of new adsorbents for effective air purification applications.

A porous and photoactive Ti-MOF based on a novel tetranuclear [Ti2Tb2] cluster

A robust and porous titanium metal-organic framework (Ti-MOF; LCU-505) has been solvothermally synthesized based on an unprecedented tetranuclear Ti2(μ3-O)2Tb2(μ2-CH3COO)2(H2O)4(OOC-)8 cluster (abbreviated as [Ti2Tb2]) and tritopic 4,4',4''-s-triazine-2,4,6-triyl-tribenzoic acid ligand (H3TATB). LCU-505 shows remarkable water stability and permanent porosity for N2 and CO2 gas adsorption. Moreover, LCU-505 demonstrates n-type semiconductor behavior and good photocatalytic activity in the degradation of organic dyes.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Photocatalytic Biocidal Coatings Featuring Zr6Ti4-Based Metal-Organic Frameworks

The world is currently suffering socially, economically, and politically from the recent pandemic outbreak due to the coronavirus disease 2019 (COVID-19), and those in hospitals, schools, and elderly nursing homes face enhanced threats. Healthcare textiles, such as masks and medical staff gowns, are susceptible to contamination of various pathogenic microorganisms, including bacteria and viruses. Metal-organic frameworks (MOFs) can potentially address these challenges due to their tunable reactivity and ability to be incorporated as porous coatings on textile materials. Here, we report how incorporating titanium into the zirconium-pyrene-based MOF NU-1000, denoted as NU-1012, generates a highly reactive biocidal photocatalyst. This MOF features a rare ligand migration phenomenon, and both the Ti/Zr center and the pyrene linker act synergistically as dual active centers and widen the absorption band for this material, which results in enhanced reactive oxygen species generation upon visible light irradiation. Additionally, we found that the ligand migration process is generally applicable to other csq topology Zr-MOFs. Importantly, NU-1012 can be easily incorporated onto cotton textile cloths as a coating, and the resulting composite material demonstrates fast and potent biocidal activity against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus epidermidis), and T7 bacteriophage virus with up to a 7-log(99.99999%) reduction within 1 h under simulated daylight.

Mesitylene Tribenzoic Acid as a Linker for Novel Zn/Cd Metal-Organic Frameworks

Three new Metal-Organic Frameworks, containing mesitylene tribenzoic acid as a linker and zinc (1) or cadmium as metals (2,3), were synthesized through solvothermal reactions, using DMF/ethanol/water as solvents, at temperatures of 80 °C (structures 1 and 3) and 120 °C (structure 2). Following single-crystal X-ray diffraction, it was found that 1 and 3 crystallize in the P2₁/c and C2/c space groups and form 2D networks, while 2 crystallizes in the Fdd2 space group, forming a 3D network. All three frameworks, upon heating, were found to be stable up to 350 °C. N₂ sorption isotherms revealed that 1 displays a BET area of 906 m²/g. Moreover, the porosity of this framework is still present after five cycles of sorption/desorption, with a reduction of 14% of the BET area, down to 784 m²/g, after the fifth cycle. The CO₂ loading capacity of 1 was found to be 2.9 mmol/g at 0 °C.

Metal Organic Frameworks as Heterogeneous Catalysts in Olefin Epoxidation and Carbon Dioxide Cycloaddition

Metal–organic frameworks (MOFs) are a family of porous crystalline materials that serve in some cases as versatile platforms for catalysis. In this review, we overview the recent developments about the use of these species as heterogeneous catalysts in olefin epoxidation and carbon dioxide cycloaddition. We report the most important results obtained in this field relating them to the presence of specific organic linkers, metal nodes or clusters and mixed-metal species. Recent advances obtained with MOF nanocomposites were also described. Finally we compare the results and summarize the major insights in specific Tables, outlining the major challenges for this emerging field. This work could promote new research aimed at producing coordination polymers and MOFs able to catalyse a broader range of CO2 consuming reactions.

Remodelling a shp: Transmetalation in a Rare-Earth Cluster-Based Metal-Organic Framework

Postsynthetic modification of metal-organic frameworks (MOFs) is an important strategy for accessing MOF analogues that cannot be easily synthesized de novo. In this work, the rare-earth (RE) cluster-based MOF Y-CU-10 with shp topology was modified through transmetalation using a series of RE ions, including La(III), Nd(III), Eu(III), Tb(III), Er(III), Tm(III), and Yb(III). In all cases, metal exchange higher than 70% was observed, with reproducible results. All transmetalated materials were fully characterized and compared to the parent MOF Y-CU-10 with regard to crystallinity, surface area, and morphology. Additionally, single-crystal X-ray diffraction measurements were performed to provide further evidence of transmetalation occurring in the nonanuclear cluster nodes of the MOF.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Metal–Organic Frameworks as Versatile Platforms for Organometallic Chemistry

Metal–organic frameworks (MOFs) are emerging porous materials with highly tunable structures developed in the 1990s, while organometallic chemistry is of fundamental importance for catalytic transformation in the academic and industrial world for many decades. Through the years, organometallic chemistry has been incorporated into functional MOF construction for diverse applications. Here, we will focus on how organometallic chemistry is applied in MOF design and modifications from linker-centric and metal-cluster-centric perspectives, respectively. Through structural design, MOFs can function as a tailorable platform for traditional organometallic transformations, including reaction of alkenes, cross-coupling reactions, and C–H activations. Besides, an overview will be made on other application categories of organometallic MOFs, such as gas adsorption, magnetism, quantum computing, and therapeutics.

Pyrene-based metal organic frameworks: from synthesis to applications

Pyrene is one of the most widely investigated aromatic hydrocarbons given to its unique optical and electronic properties. Hence, pyrene-based ligands have been attractive for the synthesis of metal-organic frameworks (MOFs) in the last few years. In this review, we will focus on the most important characteristics of pyrene, in addition to the development and synthesis of pyrene-based molecules as bridging ligands to be used in MOF structures. We will summarize the synthesis attempts, as well as the post-synthetic modifications of pyrene-based MOFs by the incorporation of metals or ligands in the structure. The discussion of promising results of such MOFs in several applications; including luminescence, photocatalysis, adsorption and separation, heterogeneous catalysis, electrochemical applications and bio-medical applications will be highlighted. Finally, some insights and future prospects will be given based on the studies discussed in the review. This review will pave the way for the researchers in the field for the design and development of novel pyrene-based structures and their utilization for different applications.

Transient Catenation in a Zirconium-Based Metal-Organic Framework and Its Effect on Mechanical Stability and Sorption Properties

Interpenetration of two or more sublattices is common among many metal-organic frameworks (MOFs). Herein, we study the evolution of one zirconium cluster-based, 3,8-connected MOF from its non-interpenetrated (NU-1200) to interpenetrated (STA-26) isomer. We observe this transient catenation process indirectly using ensemble methods, such as nitrogen porosimetry and X-ray diffraction, and directly, using high-resolution transmission electron microscopy. The approach detailed here will serve as a template for other researchers to monitor the interpenetration of their MOF samples at the bulk and single-particle limits. We investigate the mechanical stability of both lattices experimentally by pressurized in situ X-ray diffraction and nanoindentation as well as computationally with density functional theory calculations. Both lines of study reveal that STA-26 is considerably more mechanically stable than NU-1200. We conclude this study by demonstrating the potential of these MOFs and their mixed phases for the capture of gaseous n-hexane, used as a structural mimic for the chemical warfare agent sulfur mustard gas.

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

New Microporous Lanthanide Organic Frameworks. Synthesis, Structure, Luminescence, Sorption, and Catalytic Acylation of 2-Naphthol

New metal-organic frameworks (MOF) with lanthanum(III), cerium(III), neodymium(III), europium(III), gadolinium(III), dysprosium(III), and holmium(III)] and the ligand precursor 1,3,5-tris(4-carboxyphenyl)-2,4,6-trimethylbenzene (H3L) were synthesized under solvothermal conditions. Single crystal x-ray analysis confirmed the formation of three-dimensional frameworks of [LnL(H2O)2]n·xDMF·yH2O for Ln = La, Ce, and Nd. From the nitrogen sorption experiments, the compounds showed permanent porosity with Brunauer-Emmett-Teller (BET) surface areas of about 400 m2/g, and thermal stability up to 500 °C. Further investigations showed that these Ln-MOFs exhibit catalytic activity, paving the way for potential applications within the field of catalysis.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Fabrication of (4, 10) and (4, 12)-Connected Multifunctional Zirconium Metal-Organic Frameworks for the Targeted Adsorption of a Guest Molecule

Following the principle of a topology guide, a zirconium MOF (PCN-207) based on the H₄TPTA ligand (tetramethyl(4,4',4″,4‴-(pyrazine-2,3,5,6-tetrayl))tetrabenzoic acid) with C₂ symmetry and an 8-connected Zr₆(μ_3-OH)₈(OH)₈]⁸⁺ cluster with D_4h symmetry has been synthesized. PCN-206 can also be obtained by modulating the benzoic acid usage to change the flexibility of the H₄TPTA ligand. The unique positions of 8-connected Zr₆ clusters in the flu and scu networks and the flexibility of the tetratopic primary linker enable the precise insertion of fumarate (FA), 1,4-benzenedicarboxylic acid (H₂BDC), and even 2,6-naphthalenedicarboxylic acid (H₂NDC) in a one-pot reaction. Auxiliary linkers are used to generate new MOF structures or topologies or to split the pore spaces, which may significantly change the porosity and chemical and physical properties of scaffold MOFs. The results provide a successful strategy for the rational design of multicomponent Zr-MOFs. Because of differences in composition and configuration between structures, PCN-207 shows the highest separation capability of light hydrocarbons; moreover, PCN-206 exhibits the highest adsorption capacity of 2,4-D and DCF among MOFs at present.

A historical overview of the activation and porosity of metal–organic frameworks

A historical overview of the activation and porosity of MOFs including strategies to design and preserve permanent porosity in MOFs.

Hierarchically porous metal–organic frameworks: synthetic strategies and applications

Despite numerous advantages, applications of conventional microporous metal–organic frameworks (MOFs) are hampered by their limited pore sizes, such as in heterogeneous catalysis and guest delivery, which usually involve large molecules. Construction of hierarchically porous MOFs (HP-MOFs) is vital to achieve the controllable augmentation of MOF pore size to mesopores or even macropores, which can enhance the diffusion kinetics of guests and improve the storage capacity. This review article focuses on recent advances in the methodology of HP-MOF synthesis, covering preparation of HP-MOFs with intrinsic hierarchical pores, and modulated, templated and template-free synthetic strategies for HP-MOFs. The key factors which affect the formation of HP-MOF architectures are summarized and discussed, followed by a brief review of their applications in heterogeneous catalysis and guest encapsulation. Overall, this review presents a roadmap that will guide the future design and development of HP-MOF materials with molecular precision and mesoscopic complexity.

Single-site metal-organic framework catalysts for the oxidative coupling of arenes via C-H/C-H activation

C-H activation reactions are generally associated with relatively low turnover numbers (TONs) and high catalyst concentrations due to a combination of low catalyst stability and activity, highlighting the need for recyclable heterogeneous catalysts with stable single-atom active sites. In this work, several palladium loaded metal-organic frameworks (MOFs) were tested as single-site catalysts for the oxidative coupling of arenes (e.g. o-xylene) via C-H/C-H activation. Isolation of the palladium active sites on the MOF supports reduced Pd(0) aggregate formation and thus catalyst deactivation, resulting in higher turnover numbers (TONs) compared to the homogeneous benchmark reaction. Notably, a threefold higher TON could be achieved for palladium loaded MOF-808 due to increased catalyst stability and the heterogeneous catalyst could efficiently be reused, resulting in a cumulative TON of 1218 after three runs. Additionally, the palladium single-atom active sites on MOF-808 were successfully identified by Fourier transform infrared (FTIR) and extended X-ray absorption fine structure (EXAFS) spectroscopy.

Zirconium-Based Metal-Organic Frameworks for the Removal of Protein-Bound Uremic Toxin from Human Serum Albumin

Uremic toxins often accumulate in patients with compromised kidney function, like those with chronic kidney disease (CKD), leading to major clinical complications including serious illness and death. Sufficient removal of these toxins from the blood increases the efficacy of hemodialysis, as well as the survival rate, in CKD patients. Understanding the interactions between an adsorbent and the uremic toxins is critical for designing effective materials to remove these toxic compounds. Herein, we study the adsorption behavior of the uremic toxins, p-cresyl sulfate, indoxyl sulfate, and hippuric acid, in a series of zirconium-based metal-organic frameworks (MOFs). The pyrene-based MOF, NU-1000, offers the highest toxin removal efficiency of all the MOFs in this study. Other Zr-based MOFs possessing comparable surface areas and pore sizes to NU-1000 while lacking an extended aromatic system have much lower toxin removal efficiency. From single-crystal X-ray diffraction analyses assisted by density functional theory calculations, we determined that the high adsorption capacity of NU-1000 can be attributed to the highly hydrophobic adsorption sites sandwiched by two pyrene linkers and the hydroxyls and water molecules on the Zr₆ nodes, which are capable of hydrogen bonding with polar functional groups of guest molecules. Further, NU-1000 almost completely removes p-cresyl sulfate from human serum albumin, a protein that these uremic toxins bind to in the body. These results offer design principles for potential MOFs candidates for uremic toxin removal.

Revisiting the structural homogeneity of NU-1000, a Zr-based metal–organic framework

Synthesis and activation of phase-pure and defect-free metal–organic frameworks (MOFs) are essential for establishing accurate structure–property relationships.

Size Effect of the Active Sites in UiO-66-Supported Nickel Catalysts Synthesized via Atomic Layer Deposition for Ethylene Hydrogenation

Ni(II) ions have been deposited on the Zr6 nodes of a metal-organic framework (MOF), UiO-66, via an ALD-like process (ALD = atomic layer deposition). By varying the number of ALD cycles, three Ni-decorated UiO-66 materials were synthesized. A suite of physical methods has been used to characterize these materials, indicating structural and high-surface-area features of the parent MOF are retained. Elemental analysis via X-ray photoelectron spectroscopy (XPS) indicates that the anchored Ni ions are mainly on surface and near-surface MOF defect sites. Upon activation, all three materials are catalytic for ethylene hydrogenation, but their catalytic activities significantly vary, with the largest clusters displaying the highest per-nickel-atom activity. The study highlights the ease and effectiveness ALD in MOFs (AIM) for synthesizing, specifically, UiO-66-supported NiyOx catalysts.