Gold Nanoparticle Modified Screen Printed Electrodes for the Trace Sensing of Arsenic(III) in the Presence of Copper(II)

A home-made nanoporous gold microsensor for lead(II) detection in seawater with high sensitivity and anti-interference properties

A nanoporous gold microelectrode (NPG-μE) was fabricated and used for Pb(II) detection in seawater samples via square wave anodic stripping voltammetry (SWASV). The Au microelectrode (Au-μE) was fabricated by embedding a gold microfiber into a Pasteur pipette, and its surface was further modified by an anodization-electrochemical reduction (A-ECR) method, yielding the NPG-μE. The fabricated electrodes were characterized by cyclic voltammetry (CV) and field emission scanning electron microscopy (FE-SEM) for electrochemical and structural morphological investigations. SWASV results show a Pb(II) stripping peak at around -0.05 V vs. Ag/AgCl, sat. KCl, which is unusual for common Pb(II) detection (typically occurring at around -0.40 V) in anodic stripping voltammetry (ASV) analysis. The Pb(II) detection at less negative stripping potential is more beneficial. Hence, it exhibited anti-interference properties with Cd(II), which is attributed to the preferential deposition and stripping of the target analyte on the low-indexed crystal planes of the NPG structure. The calibration plot obtained by SWASV was linear in the concentration range of 0.1-10 μM, and the detection limit was found to be 57 nM (correlation coefficient of 0.9974). The NPG microsensor presented a 15-fold enhanced current response compared to Au-μE, with excellent sensitivity (27.2 μA μM-1 cm-2). The application of the NPG microsensor was examined by detecting Pb(II) in seawater samples, and a satisfactory performance was obtained.

Revealing the solid-solution interface interference behaviors between Cu2+ and As(III) via partial peak area analysis of simulations and experiments

The mutual interference in the sensing detection of heavy metal ions (HMIs) is considerably serious and complex. Besides, the co-existed ions may change the stripping peak intensity, shape and position of the target ion, which partly makes peak current analysis inaccurate. Herein, a promising approach of partial peak area analysis was proposed firstly to research the mutual interference. The interference between two species on their electrodeposition processes was investigated by simulating different kinetics parameters, including surface coverage, electro-adsorption, -desorption rate constant, etc. It was proved that the partial peak area is sensitive and regular to these interference kinetics parameters, which is favorable for distinctly identifying different interferences. Moreover, the applicability of the partial peak area analysis was verified on the experiments of Cu2+, As(III) interference at four sensing interfaces: glassy carbon electrode, gold electrode, Co3O4, and Fe2O3 nanoparticles modified electrodes. The interference behaviors between Cu2+ and As(III) relying on solid-solution interfaces were revealed and confirmed by physicochemical characterizations and kinetics simulations. This work proposes a new descriptor (partial peak area) to recognize the interference mechanism and provides a meaningful guidance for accurate detection of HMIs in actual water environment.

A critical review of on-site inorganic arsenic screening methods

Approximately 94 to 220 million people worldwide are at risk of drinking well water containing arsenic > 10 µg/L, the WHO guideline value. To identify non-compliant domestic wells, assess health risks and reduce exposure, accurate and rapid on-site inorganic arsenic screening methods are desirable because all domestic wells worldwide need to be tested. Here, the principles, advantages and limitations of commonly used colorimetry, electrochemistry, and biosensing methods are critically reviewed, with the performance compared with laboratory-based benchmark methods. Most commercial kits are based on the classic Gutzeit reaction. Despite being semi-quantitative, the more recent and more expensive products display improved and acceptable accuracy and shorter testing time (∼10 min). Carried out by trained professionals, electrochemical methods are also feasible for on-site analysis, although miniaturization is desirable yet challenging. Biosensing using whole bacterial cells or bio-engineered materials such as aptamers is promising, if incorporated with function specific nanomaterials and biomaterials. Since arsenic is frequently found as arsenite in reducing groundwater and subject to oxidation during sampling, transportation and storage, on-site separation and sample preservation are feasible but the specific methods should be chosen based on sample matrix and tested before use. To eliminate arsenic exposure among hundreds of millions of mostly rural residents worldwide, we call for concerted efforts in research community and regulatory authority to develop accurate, rapid, and affordable tests for on-site screening and monitoring of arsenic in drinking water. Access to affordable testing will benefit people who are socioeconomically disadvantaged.

Coordination engineering strategy of iron single-atom catalysts boosts anti-Cu(II) interference detection of As(III) with a high sensitivity

Mutual interference issues between heavy metal ions tremendously affect the detection reliability and accuracy in water quality analysis, especially the serious interference of Cu(II) on the detection of As(III) is greatly hard to overcome, which needs to be solved urgently. Herein, iron single-atom catalysts with different coordination structures of FeN₂C₂ and FeN₃P are constructed to selectively catalyze the detection of As(III) in the coexistence of Cu(II). FeN₃P achieves a high sensitivity of 3.90 µA ppb^-1 toward As(III) in NH₄Cl/NH₃·H₂O electrolyte (pH 8.0), completely avoiding Cu(II)-interference. Moreover, the turnover frequency (TOF) of FeN₃P is an order of magnitude higher than that of FeN₂C₂. X-ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations demonstrate that an As-O bond of H₃AsO₃ is broken by the strong affinities between both P and O atoms and Fe and As atoms, and H₃AsO₃ are preferentially reduced by FeN₃P during adsorptive process. Meanwhile, the low reaction energy barrier of the rate-determined step for As(III) reduction over FeN₃P also accelerates the deposition of As(III) and enhances its response signals. The free-Cu(II) are difficult to adsorb on FeN₃P and do not compete with As(III) for Fe active sites, which contributes to the excellent anti-Cu(II) interference capability.

2D-Hexagonal Boron Nitride Screen-Printed Bulk-Modified Electrochemical Platforms Explored towards Oxygen Reduction Reactions

A low-cost, scalable and reproducible approach for the mass production of screen-printed electrode (SPE) platforms that have varying percentage mass incorporations of 2D hexagonal boron nitride (2D-hBN) (2D-hBN/SPEs) is demonstrated herein. These novel 2D-hBN/SPEs are explored as a potential metal-free electrocatalysts towards oxygen reduction reactions (ORRs) within acidic media where their performance is evaluated. A 5% mass incorporation of 2D-hBN into the SPEs resulted in the most beneficial ORR catalysis, reducing the ORR onset potential by ca. 200 mV in comparison to bare/unmodified SPEs. Furthermore, an increase in the achievable current of 83% is also exhibited upon the utilisation of a 2D-hBN/SPE in comparison to its unmodified equivalent. The screen-printed fabrication approach replaces the less-reproducible and time-consuming drop-casting technique of 2D-hBN and provides an alternative approach for the large-scale manufacture of novel electrode platforms that can be utilised in a variety of applications.

Electrochemical detection of selected heavy metals in water: a case study of African experiences

The safety of water resources throughout the globe has been compromised by various human activities and climate change over the last decades.

Electrochemical Mini-Platform with Thread based Electrodes for Interference Free Arsenic Detection

Herein, a fully integrated thread/textile-based electrochemical sensing device has been demonstrated. A hydrophilic conductive carbon thread, chemically modified with gold nanoparticles through an electrodeposition process, was used as a working electrode (WE). The hydrophilic thread coated with Ag/AgCl and an unmodified bare hydrophilic thread were used as reference electrode (RE) and counter electrode (CE) respectively. The device was fabricated with hydrophilic conductive carbon threads supported by capillary tubes and these integrated electrodes were placed in a 2 mL glass vial. The physico-chemical characterization of the working electrode was carried out using SEM (scanning electron microscopy) and X-ray photoelectron spectroscopy (XPS). Furthermore, the fabricated sensing platform, was tested for electrochemical sensing of arsenic. The electrocatalytic oxidation activity of arsenic in the designed platform was investigated via cyclic voltammetry (CV) and square wave Voltammetry (SWV). An oxidation peak at -0.4 V corresponding to the oxidation of arsenic was obtained. Scan rate effect was performed using CV analysis and the diffusion coefficient was found to be 2.478×10-10 with a regression coefficient of R2 = 0.9647. Further, concentration effect was accomplished in the linear range 0.4 μM to 60 μM. The limit of detection was obtained as 0.416 μM. For the practical application, effect of interference from other chemicals and real sample analysis from the tap water and blood serum sample was carried out which gave remarkable recovery values.

Preparation of GO/Fe3O4@PMDA/AuNPs nanocomposite for simultaneous determination of As3+ and Cu2+ by stripping voltammetry

One of the critical challenges in the simultaneous determination of As³⁺ and Cu²⁺ by stripping voltammetry is the overlapping of their oxidation peaks. Therefore, the engineering of nanostructured sensors in order to uplift their electrochemical performance is a significant issue for the codetection of As³⁺ and Cu²⁺. Herein, we modified a glassy carbon electrode with a new nanocomposite based on poly methyldopa along with gold nanoparticles immobilized on the surface of magnetic graphene oxide (GCE/GO/Fe₃O₄@PMDA/AuNPs) that can determine As³⁺ and Cu²⁺ with great sensitivity. Optimization of the measurement conditions by square wave stripping voltammetry (SWSV) caused the oxidation peaks of As³⁺ and Cu²⁺ to be distinguished significantly from each other, while the peak currents of As³⁺ and Cu²⁺ increased 9-12 fold, respectively, compared to the bare electrode. The proposed electrode exhibits low detection limits (S/N ≥ 3): 0.15 ppb for As³⁺ and 0.11 ppb for Cu²⁺. The GCE/GO/Fe₃O₄@PMDA/AuNPs also has good linearity over a wide concentration range from 5 to 500 ppb for As³⁺ and 0.5-750 ppb for Cu²⁺. The good recovery values were obtained for the analysis of As³⁺ and Cu²⁺ in pool and drinking water samples.

A electrochemical biosensor for As(III) detection based on the catalytic activity of Alcaligenes faecalis immobilized on a gold nanoparticle-modified screen-printed carbon electrode

A electrochemical biosensor for As(III) determination has been developed by immobilization of the Alcaligenis faecalis bacteria on gold nanoparticle-modified screen-printed carbon electrode (AuNPs-SPCE). The detection of As(III) is due to the catalytic activity of arsenite oxidase enzyme which oxidizes As(III) to As(V) producing an analytical signal. To enhance the performance of the biosensor, was optimized the amount of bacteria, amount of glutaraldehyde and incubation time applied in the preparation of the electrode, in addition to the effect of pH and applied potential. The analytical application was carried out applying 300 mV (pH = 7) obtaining a LOD of 6.61 μmol L^-1 (R = 0.9975) and 700 mV (pH = 12) obtaining a LOD of 1.84 μmol L^-1 (R = 0.9983). AF/AuNPs-SPCE was applied to the determination of total arsenic in Loa river water samples after reduction, with satisfactory results.

Arsenic Monitoring in Water by Colorimetry Using an Optimized Leucomalachite Green Method

Arsenic contamination of drinking water is a global concern. Standard laboratory methods that are commonly used for arsenic detection in water, such as atomic absorption spectroscopy and mass spectroscopy, are not suitable for mass monitoring purposes. Autonomous microfluidic detection systems combined with a suitable colorimetric reagent could provide an alternative to standard methods. Moreover, microfluidic detection systems would enable rapid and cost efficient in situ monitoring of water sources without the requirement of laborious sampling. The aim of this study is to optimize a colorimetric method based on leucomalachite green dye for integration into a microfluidic detection system. The colorimetric method is based on the reaction of arsenic (III) with potassium iodate in acid medium to liberate iodine, which oxidizes leucomalachite green to malachite green. A rapid colour development was observed after the addition of the dye. Beer's law was obeyed in the range between 0.07⁻3 µg mL-1. The detection limit and quantitation limit were found to be 0.19 and 0.64 µg mL-1, respectively.

Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response?

The mechanical activation (polishing) of screen-printed electrodes (SPEs) is explored and shown to exhibit an improved voltammetric response (in specific cases) when polished with either commonly available alumina slurry or diamond spray. Proof-of-concept is demonstrated for the electrochemical sensing of nitrite where an increase in the voltammetric current is found using both polishing protocols, exhibiting an improved limit of detection (3σ) and a two-fold increase in the electroanalytical sensitivity compared to the respective un-polished counterpart. It is found that mechanical activation/polishing increases the C/O ratio which significantly affects inner-sphere electrochemical probes only (whereas outer-sphere systems remain unaffected). Mechanical activation/polishing has the potential to be a simple pre-treatment technique that can be extended and routinely applied towards other analytes for an observable improvement in the electroanalytical response.

Electrochemical Biosensors: A Solution to Pollution Detection with Reference to Environmental Contaminants

The increasing environmental pollution with particular reference to emerging contaminants, toxic heavy elements, and other hazardous agents is a serious concern worldwide. Considering this global issue, there is an urgent need to design and develop strategic measuring techniques with higher efficacy and precision to detect a broader spectrum of numerous contaminants. The development of precise instruments can further help in real-time and in-process monitoring of the generation and release of environmental pollutants from different industrial sectors. Moreover, real-time monitoring can also reduce the excessive consumption of several harsh chemicals and reagents with an added advantage of on-site determination of contaminant composition prior to discharge into the environment. With key scientific advances, electrochemical biosensors have gained considerable attention to solve this problem. Electrochemical biosensors can be an excellent fit as an analytical tool for monitoring programs to implement legislation. Herein, we reviewed the current trends in the use of electrochemical biosensors as novel tools to detect various contaminant types including toxic heavy elements. A particular emphasis was given to screen-printed electrodes, nanowire sensors, and paper-based biosensors and their role in the pollution detection processes. Towards the end, the work is wrapped up with concluding remarks and future perspectives. In summary, electrochemical biosensors and related areas such as bioelectronics, and (bio)-nanotechnology seem to be growing areas that will have a marked influence on the development of new bio-sensing strategies in future studies.

Electrochemical Detection of As(III) by a rGO/Fe3O4-modified Screen-Printed Carbon Electrode

A reduced graphene oxide (rGO)/Fe₃O₄ composites modified screen-printed carbon electrode (SPCE) was used to determinate As(III) in a HAc-NaAc buffer solution. The rGO/Fe₃O₄ composites were prepared by a simple and one-pot synthesis method, and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), FT-IR and Raman spectra. The electrochemical behaviors of the composite electrode were characterized by cycle voltammetry and electrochemical impedance spectroscopy. The experimental parameters, such as supporting electrolyte, solution pH, deposition potential, deposition time were optimized, respectively. The calibration curve for the detection of As(III) in the range of 2 to 20 ppb was I = -4.495 + 1.922C, with a coefficient of 0.994. The sensitivity was 1.922 μA/ppb, and with about twice Fe₃O₄ modified SPCE, a detection limit as low as 0.3 ppb was achieved. The proposed electrode was validated by analyzing the As(III) content in real water samples.

A long-range emissive mega-Stokes inorganic–organic hybrid material with peripheral carboxyl functionality for As(v) recognition and its application in bioimaging

We demonstrate a strategy for the recognition of As⁵⁺ in aqueous solution using a red-emissive probe based on a perylene–Cu²⁺ ensemble decorated with peripheral free carboxyl functionality.

Robust electrochemical analysis of As(III) integrating with interference tests: a case study in groundwater

In Togtoh region of Inner Mongolia, northern China, groundwater encountered high concentrations As contamination (greater than 50 μg L(-1)) causes an increasing concern. This work demonstrates an electrochemical protocol for robust (efficient and accurate) determination of As(III) in Togtoh water samples using Au microwire electrode without the need of pretreatment or clean-up steps. Considering the complicated conditions of Togtoh water, the efficiency of Au microwire electrode was systematically evaluated by a series of interference tests, stability and reproducibility measurements. No obvious interference on the determination of As(III) was observed. Especially, the influence of humic acid (HA) was intensively investigated. Electrode stability was also observed with long-term measurements (70 days) in Togtoh water solution and under different temperatures (0-35 °C). Excellent reproducibility (RSD:1.28%) was observed from different batches of Au microwire electrodes. The results obtained at Au microwire electrode were comparable to that obtained by inductively coupled plasma atomic emission spectroscopy (ICP-AES), indicating a good accuracy. These evaluations (efficiency, robustness, and accuracy) demonstrated that the Au microwire electrode was able to determine As(III) in application to real environmental samples.

Disposable screen printed electrochemical sensors: tools for environmental monitoring

Screen printing technology is a widely used technique for the fabrication of electrochemical sensors. This methodology is likely to underpin the progressive drive towards miniaturized, sensitive and portable devices, and has already established its route from "lab-to-market" for a plethora of sensors. The application of these sensors for analysis of environmental samples has been the major focus of research in this field. As a consequence, this work will focus on recent important advances in the design and fabrication of disposable screen printed sensors for the electrochemical detection of environmental contaminants. Special emphasis is given on sensor fabrication methodology, operating details and performance characteristics for environmental applications.

Role of Fe(III) in preventing humic interference during As(III) detection on gold electrode: spectroscopic and voltammetric evidence

A drawback of As(III) detection using square wave anodic stripping voltammetry (SWASV) is that it is susceptible to interferences from various metals or organic compounds, especially in real sample water. This study attempts to understand the interference of co-existing of Fe(III) and humic acid (HA) molecules to the electrochemical detection of As(III) using Fourier transform infrared (FTIR) spectrum and X-ray photoelectron spectroscopy (XPS). The electrochemical experiments include stripping of As(III) in the solutions containing HA with different concentrations, cyclic voltammetry in 0.5M H2SO4 in the presence of HA or Fe(III) with/without addition of Fe(III) or HA, and stripping of As(III) in the presence of HA or Fe(III) with/without addition of Fe(III) or HA. FTIR and XPS are employed to confirm the affinity of HA to Fe(III) or As(III) in acidic condition.

Nanometer Materials Modified Electrodes for Detection of Heavy Metal Ions by Stripping Voltammetry

More and more heavy metal ions pollution events happen nowadays, so how to detect and remove heavy metal ions is a very important problem. Electrochemical method is relatively simple device, convenient automatic operation. Because of its high sensitivity and good selectivity, it becomes a good method to detect heavy metal ions. This paper summarized the detection of heavy metal ions by stripping voltammetry.