Self-powered multifunctional platform based on dual-photoelectrode for dual-mode detection and inactivation of Salmonella enteritidis

Self-powered photoelectrochemical (PEC) sensing is a novel sensing modality. The introduction of dual-mode sensing and photoelectrocatalysis in a self-powered system enables both detection and sterilization purposes. To this end, herein, a self-powered multifunctional platform for the photoelectrochemical-fluorescence (PEC-FL) detection and in-situ inactivation of Salmonella enteritidis (SE) was constructed. The platform utilized Bi4NbO8Cl/V2CTx/FTO as a photoanode and CuInS2/FTO as a photocathode and incubated quantum dot (QDs) signaling probes on the surface of the photocathode. During detection, the system drives the transfer of photogenerated electrons between the dual photoelectrodes through the Fermi energy level difference. The photoanode amplifies the photoelectric signal, while the photocathode is solely dedicated to the immune recognition process. QDs provide an additional fluorescence signal to the system. Under optimal experimental conditions, the multifunctional platform achieves detection limits of 3.2 and 5.3 CFU/mL in PEC and FL modes respectively, with a detection range of 2.91 × 102 to 2.91 × 108 CFU/mL. With the application of an external bias voltage, it further promotes electron transfer between the dual photoelectrodes, inhibits the recombination of photogenerated electrons and holes. It generates a significant amount of superoxide radicals (·O2-) in the cathodic region, resulting in strong sterilization efficiency (99%). The constructed self-powered multifunctional platform exhibits high sensitivity and sterilization efficiency, it provides a feasible and effective strategy to enhance the comprehensive capability of self-powered sensors.

A type of self-assembled and label-free DNA-modified electrochemical biosensors based on magnetic α-Fe2O3/Fe3O4 heterogeneous nanorods for ultra-sensitive detection of CYP2C19*3

CYP2C19*3 enzyme plays a pivotal role in drug metabolism and is tightly regulated by the CYP2C19*3 gene. Therefore, quantification of CYP2C19*3 gene holds paramount importance for achieving personalized medication guidance in precision medicine. In this project, the magnetic electrochemical biosensors were constructed for the ultra-sensitive detection of CYP2C19*3 gene. Employing magnetic α-Fe2O3/Fe3O4@Au as the matrixes for signal amplification, CYP2C19*3 complementary chains (c-ssDNA) were bound to their surfaces through gold-sulfur bonds with subsequent specific sites blockade by bovine serum albumin (BSA) to form the α-Fe2O3/Fe3O4@Au/c-ssDNA/BSA biosensors. This design enabled efficient biosensors separation, target gene capture, and self-assembly on the electrode surface, enhancing the response signal. The biosensors exhibited excellent capture capabilities with a wide linear range (1 pM-1 μM), a low detection limit of 0.2710 pM, a quantitation limit of 0.9033 pM, reproducibility with an RSD value of 1.26 %, and stable storage for at least one week. The RSD value of CYP2C19*3 in serum samples consistently remained below 4.5 %, with a recovery rate ranging 95.52 % from 102.71 %. Moreover, the target gene could be accurately identified and captured in a mixed system of multiple nucleotide mutants of the CYP2C19*3 gene, suggesting a promising applicability and popularization.

Harnessing glycofluoroforms for impedimetric biosensing

Glycans play a major role in biological cell-cell recognition and signal transduction but have found limited application in biosensors due to glycan/lectin promiscuity; multiple proteins are capable of binding to the same native glycan. Here, site-specific fluorination is used to introduce protein-glycan selectivity, and this is coupled with an electrochemical detection method to generate a novel biosensor platform. 3F-lacto-N-biose glycofluoroform is installed onto polymer tethers, which are subsequently immobilised onto gold screen printed electrodes, providing a non-fouling surface. The impedance biosensing platform is shown to selectively bind cancer-associated galectin-3 compared to control glycans and proteins. To improve the analytical capability, Bayesian statistical analysis was deployed in the equivalent circuit fitting of electrochemical impedance spectroscopy data. It is shown that Markov Chain Monte Carlo (MCMC) analysis is a helpful method for visualising experimental irreproducibility, and we apply this as a quality control step.

A novel electrochemical aptasensor based on AgPdNPs/PEI-GO and hollow nanobox-like Pt@Ni-CoHNBs for procymidone detection

Herein, an aptasensor based on a signal amplification strategy was developed for the sensitive detection of procymidone (PCM). AgPd nanoparticles/Polenimine Graphite oxide (AgPdNPs/PEI-GO) was weaned as electrode modification material to facilitate electron transport and increase the active sites on the electrode surface. Besides, Pt@Ni-Co nanoboxes (Pt@Ni-CoHNBs) were utilized to be carriers for signaling tags, after hollowing ZIF-67 and growing Pt, the resulting Pt@Ni-CoHNBs has a tremendous amounts of folds occurred on the surface, enables it to carry a larger quantity of thionine, thus amplify the detectable electrochemical signal. In the presence of PCM, the binding of PCM to the signal probe would trigger a change in electrical signal. The aptasensor was demonstrated with excellent sensitivity and a low detection limit of 0.98 pg·mL-1, along with a wide linear range of 1 μg·mL-1 to 1 pg·mL-1. Meanwhile, the specificity, stability and reproducibility of the constructed aptasensor were proved to be satisfactory.

Magnetic self-assembled label-free electrochemical biosensor based on Fe3O4/α-Fe2O3 heterogeneous nanosheets for the detection of Tau proteins

A type of electrochemical biosensors based on magnetic Fe3O4/α-Fe2O3 heterogeneous nanosheets was constructed to detect Tau proteins for early diagnosis and intervention therapy of Alzheimer's disease (AD). Firstly, Fe3O4/α-Fe2O3 heterogeneous nanosheets were fabricated as the substrate to realize magnetic self-assembly and magnetic separation to improve current response, and Fe3O4/α-Fe2O3@Au-Apt/ssDNA/MCH biosensors were successfully constructed through the reduction process of chloroauric acid, the immobilizations of aptamer (Apt) and ssDNA, and the intercept process of 6-Mercapto-1-hexanol (MCH); the construction process of the electrochemical biosensor was monitored using Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and the factors affecting the current response of this sensor (concentration of Fe3O4/α-Fe2O3@Au and Apt/ssDNA, incubation temperature and time of Tau) were explored and optimized using differential pulse voltammetry (DPV). Analyzing the performance of this sensor under optimal conditions, the linear range was finally obtained to be 0.1 pg/mL-10 ng/mL, the limit of detection (LOD) was 0.08 pg/mL, and the limit of quantification (LOQ) was 0.28 pg/mL. The selectivity, reproducibility and stability of the biosensors were further investigated, and in a really sample analysis using human serum, the recoveries were obtained in the range of 93.93 %-107.39 %, with RSD ranging from 1.05 % to 1.94 %.

A hair-ball heterostructure of MnS-MnS2/CdS with compact linking interface for ultrasensitive photoelectrochemical bioanalysis of carcinoembryonic antigen

The heterostructured photoelectric material is supposed to markedly promote the photoelectrochemical (PEC) property. Herein, the species heterostructured MnS/CdS and MnS-MnS2/CdS(1∼2) composites derived from Mn-ZIF MOFs via a sulfofication reaction using Cd(NO3)2, CdC12 cadmium source, respectively. Under irradiation, the PEC tests showed that the photocurrent response of MnS-MnS2/CdS(1∼2) signally enhanced compared to globose MnS/CdS heterostructure and pure MnS or CdS. It was ascribed to the matching band-gap to form type II heterojunction in MnS-MnS2/CdS(1∼2) which dramatically facilitated photo-induced electron/hole (e-/h+) separation and transfer. The hair-ball morphologies structure of MnS-MnS2/CdS(1∼2) with large number of pores was beneficial to improve penetrating efficiency of the electrolyte liquid. Meanwhile, the well-synergistic effect on the MnS, MnS2, CdS components and with tight connecting heterojunction interface among MnS-MnS2/CdS(1∼2) which also led to violently photocurrent output. Besides, the chitosan (CS) was covalently coupled with glutaraldehyde (GLD) to obtain steady composite film, and the cross-linker of GLD can achieve the high efficiency to graft the Apt-CEA (aptamer) biomolecules, which resulting in the promotion of hybridization reaction efficiency of the CEA target. Hence, this created biosensor of Apt-CEA/GLD-CS/MnS-MnS2/CdS(1)/ITO for the CEA detection displayed a wide linear range from 0.001 to 18 ng mL-1 and with ultralow detection limit of 0.313 pg mL-1. This research innovatively prepared a contact heterojunction interface with special porosities structure, which had superior PEC nature for the fabrication of high-performance biosensor.

Magnetically induced self-assembly electrochemical biosensor with ultra-low detection limit and extended measuring range for sensitive detection of HER2 protein

An innovative electrochemical biosensor was fabricated for sensitive detection of human epidermal growth factor receptor 2 (HER2) protein, which was considered as an essential tumor marker for diagnosis and treatment evaluation of breast cancer. The sensor was constructed using Apt and PNA as recognition probes incorporated with magnetic Fe3O4/α-Fe2O3@Au nanocomposites. The sensing strategy was designed to lower the detection limit of HER2, and avoid the large steric interference caused by macromolecular HER2 on the electrode surface. Rigid structure dsDNA (Apt/ssDNA) was designed to improve the sensitivity of the sensor. Apt captured the macromolecular HER2 protein, and ssDNA chains were simultaneously released, causing a sensitive change in the electrochemical signal. PNA captured the released ssDNA chains, which converted the electrochemical signal changes caused by HER2 to those caused by the number of short strand ssDNA, so the detection range was extended. Under optimized conditions, this sensing strategy realized an ultra-low detection LOD of HER2 (4.1 fg·mL-1), and the detection range was 10 fg·mL-1-5 × 106 fg·mL-1. The experimental results confirmed that the electrochemical biosensor had excellent selectivity, reproducibility, and storage stability. Analysis of spiked serum samples exhibited a recovery rate of 95.9-115.7 %, which indicated great promise for HER2 detection in serum samples.

A sensitive and rapid electrochemical biosensor for sEV-miRNA detection based on domino-type localized catalytic hairpin assembly

Small extracellular-vesicule-associated microRNA (sEV-miRNA) is an important biomarker for cancer diagnosis. However, rapid and sensitive detection of low-abundance sEV-miRNA in clinical samples is challenging. Herein, a simple electrochemical biosensor that uses a DNA nanowire to localize catalytic hairpin assembly (CHA), also called domino-type localized catalytic hairpin assembly (DT-LCHA), has been proposed for sEV-miRNA1246 detection. The DT-LCHA offers triple amplification, (i). CHA system was localized in DNA nanowire, which shorten the distance between hairpin substrate, inducing the high collision efficiency of H1 and H2 and domino effect. Then, larger numbers of CHAs were triggered, capture probe bind DT-LCHA by exposed c sites. (ii) The DNA nanowire can load large number of electroactive substance RuHex as amplified electrochemical signal tags. (iii) multiple DT-LCHA was carried by the DNA nanowire, only one CHA was triggered, the DNA nanowire was trapped by the capture probe, which greatly improve the detection sensitivity, especially when the target concentration is extremely low. Owing to the triple signal amplification in this strategy, sEV-miRNA at a concentration of as low as 24.55 aM can be detected in 20 min with good specificity. The accuracy of the measurements was also confirmed using reverse transcription quantitative polymerase chain reaction. Furthermore, the platform showed good performance in discriminating healthy donors from patients with early gastric cancer (area under the curve [AUC]: 0.96) and was equally able to discriminate between benign gastric tumors and early cancers (AUC: 0.77). Thus, the platform has substantial potential in biosensing and clinical diagnosis.

Sensitive and selective impedimetric determination of TNT using RSM-CCD optimization

Detection of trace amounts of 2,4,6-Trinitrotoluene as a widely used explosive in the military and industrial sectors is of vital importance due to security and environmental concerns. The sensitive and selective measurement characteristics of the compound still is considered a challenge for analytical chemists. Unlike conventional optical and electrochemical methods, the electrochemical impedance spectroscopy technique (EIS), has a very high sensitivity, but it faces a significant challenge in that it requires complex and expensive steps to modify the electrode surface with selective agents. We reported the design and construction of an inexpensive, simple, sensitive, and selective impedimetric electrochemical TNT sensor based on the formation of a Meisenheimer complex between magnetic multiwalled carbon nanotubes modified with aminopropyl triethoxysilane (MMWCNTs @ APTES) and TNT. The formation of the mentioned charge transfer complex at the electrode-solution interface blocks the electrode surface and disrupts the charge transfer in [(Fe (CN) ₆)] ^3-/4- redox probe system. Charge transfer resistance changes (ΔR_CT) were used as an analytical response that corresponded to TNT concentration. To investigate the influence of effective parameters on the electrode response, such as pH, contact time, and modifier percentage, the response surface methodology based on central composite design (RSM-CCD) was used. The calibration curve was achieved in the range of 1-500 nM with a detection limit of 0.15 nM under optimal conditions, which included pH of 8.29, contact time of 479 s, and modifier percentage of 12.38% (w/w). The selectivity of the constructed electrode towards several nitroaromatic species was investigated, and no significant interference was found. Finally, the proposed sensor was able to successfully measure TNT in various water samples with satisfactory recovery percentages.

A Sensitive Hydroquinone Amperometric Sensor Based on a Novel Palladium Nanoparticle/Porous Silicon/Polypyrrole-Carbon Black Nanocomposite

Exposure to hydroquinone (HQ) can cause various health hazards and negative impacts on the environment. Therefore, we developed an efficient electrochemical sensor to detect and quantify HQ based on palladium nanoparticles deposited in a porous silicon-polypyrrole-carbon black nanocomposite (Pd@PSi-PPy-C)-fabricated glassy carbon electrode. The structural and morphological characteristics of the newly fabricated Pd@PSi-PPy-C nanocomposite were investigated utilizing FESEM, TEM, EDS, XPS, XRD, and FTIR spectroscopy. The exceptionally higher sensitivity of 3.0156 μAμM^-1 cm^-2 and a low limit of detection (LOD) of 0.074 μM were achieved for this innovative electrochemical HQ sensor. Applying this novel modified electrode, we could detect wide-ranging HQ (1-450 μM) in neutral pH media. This newly fabricated HQ sensor showed satisfactory outcomes during the real sample investigations. During the analytical investigation, the Pd@PSi-PPy-C/GCE sensor demonstrated excellent reproducibility, repeatability, and stability. Hence, this work can be an effective method in developing a sensitive electrochemical sensor to detect harmful phenol derivatives for the green environment.

Smartphone-Based Electrochemiluminescence for Visual Simultaneous Detection of RASSF1A and SLC5A8 Tumor Suppressor Gene Methylation in Thyroid Cancer Patient Plasma

Visual one-step simultaneous detection of low-abundance methylation is a crucial challenge in early cancer diagnosis in a simple manner. Through the design of a closed split bipolar electrochemistry system (BE), detection of promoter methylation of tumor suppressor genes in papillary thyroid cancer, RASSF1A and SLC5A8, was achieved using electrochemiluminescence. For this purpose, electrochemiluminescence of luminol loaded into the Fe₃O₄@UiO-66 and gold nanorod-functionalized graphite-like carbon nitride nanosheet (AuNRs@C₃N₄ NS), separately, on the anodic and cathodic pole bipolar electrodes (BPEs) in two different chambers of a bipolar cell were recorded on a smartphone camera. To provide the same electric potential (ΔE_elec) through the BPEs to conduct simultaneous light emission, as well as to achieve higher sensitivity, anodic and cathodic poles BPEs were separately connected to ruthenium nanoparticles electrodeposited on nitrogen-doped graphene-coated Cu foam (fCu/N-GN/RuNPs) to provide a hydrogen evolution reaction (HER) and polycatechol-modified reduced graphene oxide/pencil graphite electrode (PC-rGO/PGE) to provide electrooxidation of hydrazine. Moreover, taking advantages of the strong cathodic ECL activity due to the roles of AuNRs, as well as the high density of capture probes on the UiO-66 and Fe₃O₄ roles in improving the signal-to-background ratio (S/B) in complicated plasma media, a sensitive visual ECL immunosensor was developed to detect two different genes as model target analytes in patient plasma samples. The ability of discrimination of methylation levels as low as 0.01% and above 90% clinical sensitivity in thyroid cancer patient plasma implies that the present strategy is able to diagnose cancer early, as well as monitor responses of patients to therapeutic agents.

Ultra pH-sensitive detection of total and free prostate-specific antigen using electrochemical aptasensor based on reduced graphene oxide/gold nanoparticles emphasis on TiO2/carbon quantum dots as a redox probe

The development of a rapid, sensitive, and straightforward detection method of prostate-specific antigen (PSA) is indispensable for the early diagnosis of prostate cancer (PCa). This work relates an electrochemical method using functionalized single-stranded DNA aptamer to diagnose PCa and benign prostate hyperplasia. The sensing platform relies on PSA recognition by aptamer/Au/GO-nanohybrid-modified glassy carbon electrode. Besides ferrocyanide TiO2/carbon quantum dots (CQDs) probe is used to investigate the effect of nanoparticle-containing electrolyte. Optimization of incubation time of aptamer/Au/GO-nanohybrid and volume fraction of nafion were done using Design Expert 10 software reporting 42.4 h and 0.095% V/V, respectively. In ferrocyanide medium, PSA detection as low as 3, 2.96, and 0.85 ng mL-1 was achieved with a dynamic range from 0.5 to 7 ng ml-1, in accord with clinical values, using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy, respectively. Moreover, this sensor exhibited conspicuous performance in TiO2/CQDs-containing medium with different pH values of 5.4 and 8 to distinguish total PSA and free PSA, resulting in very low limit of detections, 0.028, and 0.007 ng ml-1, respectively. The results manifested the proposed system as a forthcoming sensor in a clinical and point of care analysis of PSA.

Electrochemical prostate-specific antigen biosensors based on electroconductive nanomaterials and polymers

Prostate cancer (PCa), the second most malignant neoplasm in men, is also the fifth leading cause of cancer-related deaths in men globally. Unfortunately, this malignancy remains largely asymptomatic until late-stage emergence when treatment is limited due to the lack of effective metastatic PCa therapeutics. Due to these limitations, early PCa detection through prostate-specific antigen (PSA) screening has become increasingly important, resulting in a more than 50% decrease in mortality. Conventional assays for PSA detection, such as enzyme-linked immunosorbent assay (ELISA), are labor intensive, relatively expensive, operator-dependent and do not provide adequate sensitivity. Electrochemical biosensors overcome these limitations because they are rapid, cost-effective, simple to use and ultrasensitive. This article reviews electrochemical PSA biosensors using electroconductive nanomaterials such as carbon-, metal-, metal oxide- and peptide-based nanostructures, as well as polymers to significantly improve conductivity and enhance sensitivity. Challenges associated with the development of these devices are discussed thus providing additional insight into their analytic strength as well as their potential use in early PCa detection.