Stereoselective separation of psychoactive substances: Multivariate optimization and validation of a capillary electrophoresis method using carboxymethyl-β-CD/deep eutectic solvent dual system

A comprehensive study was performed to determine an optimum enantioseparation method for fluorine-substituted amphetamine and cathinone derivatives (fluor-amphetamine and fluor-cathinone derivatives), using a binary system consisting of carboxymethyl-β-CD (CM-β-CD) and a deep eutectic solvent (DES), namely choline chloride-ethylene glycol (ChCl-EG). Under this framework, the optimization and modeling of the separation conditions in a binary system were performed with the objective of maximizing resolution and minimizing analysis time. This was achieved through the application of response surface methodology. In particular, the effect of chiral selector concentration and percentage of DES on resolution and analysis time were investigated and optimized using a complete experimental design. The optimum enantioseparation conditions were determined to be 13.84 mM CM-β-CD and 0.15% v/v ChCl-EG for fluorine-substituted amphetamine derivatives and 14.36 mM and 0.75% v/v ChCl-EG for fluorine-substituted cathinone derivatives, respectively. This combination resulted in a baseline separation for eight out of the nine analytes studied. Overall, the results demonstrated the synergistic effect of the CM-β-CD/DES dual system and highlighted the significance of DESs as additives in capillary electrophoresis.

Relevance of the calculation of the diffusion coefficient in a capillary electrophoresis experiment

This paper analyzes the role of the diffusion coefficient in the movement of analytes that can reversibly react with a selector given a product in the presence of drift. The problem mimics the movement of enantiomers in a capillary electrophoresis experiment. As is well known, the signal in the capillary must be sharp enough to make a good determination of the effective mobility of the analytes being analyzed. The essence of the technique is based on fast interconversion rates. Therefore, the effective diffusion coefficient must be negligible during the experiment. In the present work, an exact expression for both the apparent mobility and the diffusion coefficient is obtained. This is done by writing the rate equations governing the process and solving them using the generating function technique. The effective mobility coincides with the Wren and Rowe equation, whereas the diffusion coefficient allows us to determine the values of the parameters to be taken into account so that this quantity is minimal or close to zero. On the other hand, the numerical solution of the kinetic equations and Monte Carlo simulations allow us to follow the signal in the capillary and to determine its space-time evolution.

Evaluation of greenness and analytical performances of separative methods for chiral separation of novel lactam-based P2RX7-antagonists

In this work, a preparative supercritical fluid chromatography (SFC) method was first developed to separate a series of chiral compounds evaluated as lactam-based P2RX7 antagonists. Subsequently, high-performance liquid chromatography, SFC, and capillary electrophoresis (CE) were comparatively investigated as QC tools to determine the enantiomeric purity of the separated isomers, including analytical performance and greenness. The screening of the best conditions was carried out in liquid and SFC on the nine derivatives and the amylose tris(3,5-dimethylphenylcarbamate)-based chiral stationary phase was found to be highly efficient. The same screening was carried out in CE and very different conditions, either in acidic or basic background electrolyte and different cyclodextrins used as chiral selectors, allowed the separation of six of the nine derivatives. 1-((3,4-Dichlorophenyl)carbamoyl)-5-oxopyrrolidine-2-carboxylic acid (compound 1) was chosen as a probe, and its semi-preparative separation by SFC and enantiomeric verification using the three techniques are presented. Its limit of detection and limit of quantification are calculated for each method. Finally, the greenness of each quality control method was evaluated.

The separation of the enantiomers of diquats by capillary electrophoresis using randomly sulfated cyclodextrins as chiral selectors

Diquats, derivatives of the widely used herbicide diquat, represent a new class of functional organic molecules. A combination of their special electrochemical properties and axial chirality could potentially result in their important applications in supramolecular chemistry, chiral catalysis, and chiral analysis. However, prior to their practical applications, the diquats have to be prepared in enantiomerically pure forms and the enantiomeric purity of their P- and M-isomers has to be checked. Hence, a chiral capillary electrophoresis (CE) method has been developed and applied for separation of P- and M-enantiomers of 11 new diquats. Fast and better than baseline CE separations of enantiomers of all 11 diquats within a short time 5-7 min were achieved using acidic buffer, 22 mM NaOH, 35 mM H3 PO4 , pH 2.5, as a background electrolyte, and 6 mM randomly sulfated α-, β-, and γ-cyclodextrins as chiral selectors. The most successful selector was sulfated γ-cyclodextrin, which baseline separated the enantiomers of all 11 diquats, followed by sulfated β-cyclodextrin and sulfated α-cyclodextrin, which baseline separated enantiomers of 10 and nine diquats, respectively. Using this method, a high enantiopurity degree of the isolated P- and M-enantiomers of three diquats with a defined absolute configuration was confirmed and their migration order was identified.

The potential of the use of deep eutectic solvents and amino acid-based ionic liquids to enhance the chiral discrimination ability of different chiral selectors in capillary electrophoresis

The effect of the combined use of amino acid-based ionic liquids (AAILs) and deep eutectic solvents (DESs) with either cyclodextrin- (CD) or cyclofructan- (CF) based chiral selectors for the chiral separation of amphetamine derivatives was investigated in the present study. A non-significant improvement in enantiomeric separation of target analytes was observed when AAILs were combined with either CF or CD. On the other side, a markedly improved chiral separation of enantiomers was obtained using the dual carboxymethyl-β-cyclodextrin/DES system, highlighting the existence of a synergistic effect. After the addition of 0.5% v/v of choline chloride-ethylene glycol, the resolution of the enantiomers of amphetamine, methamphetamine and 3-fluorethamphetamine, increased from 1.4, 1.1, 1.0 to 1.8, 1.8, and 1.5 min, and the analysis times increased from 19.54, 20.48, 18.71 to 35.71, 35.78 and 32.90 min, respectively. This was not the case for the CF/DES dual system, in which the separation of amphetamines worsened, indicating an antagonistic effect. In conclusion, DESs are a very promising additive in capillary electrophoresis that can improve the separation of chiral molecules in combination with CDs but not CFs.

Enantioseparation and ecotoxicity evaluation of ibrutinib by Electrokinetic Chromatography using single and dual systems

In this work, two chiral methods enabling the separation of ibrutinib enantiomers were developed by Electrokinetic Chromatography. A cyclodextrin (CD) or a mixture of the CD and a chiral ionic liquid (CIL) was used as chiral selector. Using the single CD system, seven neutral and six anionic CDs were tested in a formate buffer at pH 3.0 working in positive and negative polarity, respectively. The use of sulfated-γ-CD (S-γ-CD) and negative polarity originated the best results considering analysis time and enantioresolution. The optimization of the experimental conditions allowed obtaining the separation of ibrutinib enantiomers in an analysis time of 4.2 min with an enantioresolution value of 1.5. The effect of the addition of fifteen CILs on the enantioresolution was evaluated showing that both analysis time and enantioresolution were generally increased. A mixture of S-γ-CD and [TMA][L-Lys] was selected which provided the separation of ibrutinib enantiomers in 8.1 min with an enantioresolution value of 3.3 under the same experimental conditions as in the case of using the single CD system. The enantiomeric impurity (S-ibrutinib) was the first-migrating isomer when using the single CD and the combined CD/CIL systems, as corresponds to the most desirable situation. Both chiral methods allowed the detection of the enantiomeric impurity up to a 0.1% as established by the International Council on Harmonization. After establishing the analytical characteristics of both chiral methodologies developed, they were applied to the enantiomeric determination of ibrutinib in a pharmaceutical formulation for hospital use marketed as pure enantiomer (R-ibrutinib) and to evaluate the stability and ecotoxicity of racemic ibrutinib and R-ibrutinib on Daphnia magna. The developed methodologies enabled, for the first time, the rapid chiral quantitation of ibrutinib in abiotic and biotic matrices.

Establishment and Molecular Modeling Study of Cyclodextrin-Based Synergistic Enantioseparation Systems with Three New Amino Acid Chiral Ionic Liquids as Additives in Capillary Electrophoresis

Chiral ionic liquids (CILs) have attracted more and more attention due to their superior performance as chiral additives in capillary electrophoresis. In this work, based on the cyclodextrin (CD) derivatives and three new amino acid CILs (trifluoroacetate-L-Hydroxyproline, nitric acid-L-Hydroxyproline and trifluoroacetate-L-threonine), the new synergistic systems were established for chiral drug separation. In contrast to the traditional single glucosyl-β-CD (Glu-β-CD) separation system, the CIL/Glu-β-CD synergistic systems achieved improved resolution of three model drug racemates. Some experimental variables, such as CIL concentration, Glu-β-CD concentration, buffer pH, applied voltage, and the type and proportion of organic modifier, were optimized in the trifluoroacetate-L-Hydroxyproline/Glu-β-CD synergistic system. In addition, the recognition process in the synergistic system was studied through the molecular modeling method.

Improvement of chemo- and stereoselectivity for phosphorothioate oligonucleotides in capillary electrophoresis by addition of cyclodextrins

Phosphorothioate (PS) modification is one of the most widely used oligonucleotide chemical alterations in the oligonucleotide backbone. It has proven to be crucial in the field of therapeutic oligonucleotides regarding the optimization of their physicochemical and biological properties. In this study, a capillary electrophoresis (CE) method with an acidic background electrolyte (BGE) containing a combination of β- and γ-cyclodextrins derivatives as chiral selectors is proposed for the diastereomeric separation of 5-mer oligonucleotides containing 0, 1, 2, or 3 phosphorothioate linkages (5´-TCGTG-3´). The effects of the BGE pH, organic modifier addition, and type of cyclodextrin (CD) on chemo- and stereoselectivity and resolution were studied. A mixture of 25 mM (2-hydroxy-3-N,N,N-trimethylamino)propyl-γ-CD and 10 mM carboxymethyl-β-cyclodextrin in a pH 3 buffer was found to be the most appropriate system for the qualitative evaluation of the short oligonucleotides investigated. These phosphorothioate oligonucleotides were separated with high efficiency in less than 11 min with no capillary treatment. The suggested approach can be the basis for purity testing of this new generation of therapeutics.

Comparison of cyclofructan-, cyclodextrin-, and polysaccharide-based chiral stationary phases for the separation of pharmaceuticals

In this study, cyclofructan (CF)-, cyclodextrin (CD)-, and polysaccharide-based chiral stationary phases (CSPs) were exploited in high-performance liquid chromatography (HPLC) for the chiral separations of different clinically and pharmaceutically important compounds. In particular, R-naphthylethyl carbamate CF6 (RN-CF6), 3,5-dimethylphenyl carbamate CF7 (DMP-CF7), neutral beta cyclodextrin (β-CD), 3,5-dimethylphenyl carbamate β-CD (DMP-β-CD), and cellulose tris-(3,5-dimethylphenylcarbamate) (Cellulose-Tris DMP) columns were utilized under isocratic elution. The performance of these CSPs as chiral separation media was evaluated by use of nine analytes: acidic, basic, and amphiprotic. A possible correlation between the functional groups of these analytes and the chiral-recognition ability of each chiral column was also examined. The enantioseparations were optimized by varying different parameters, such as mobile phase additives, column temperature, and flow rate. Finally, a comparison was made between all CSPs, and it was expressed in terms of resolution (R_S), efficiency (N), selectivity (α), retention factors (k₁', k₂') and analysis time (t_R1, t_R2). It was observed that RN-CF6 was the most suitable and efficient CSP for the chiral separation of various types of analytes, including acids, primary and tertiary amines, alcohols, and many neutral compounds. It was the only CSP that provided baseline enantioseparation of thyroxine (R_S = 1.6) and cetirizine (R_S = 2.0).

Preparation and evaluation of chiral open-tubular columns supported with zeolite silica nanoparticles and single/dual chiral selectors using capillary electrochromatography with amperometric detection

In this work, novel stationary phase coatings by zeolite SiO₂NPs coupled with β-cyclodextrin (β-CD) or β-CD/L-phenylalanine were developed for chiral open-tubular capillary electrochromatography (OT-CEC). The OT columns were prepared taking advantage of the strong adhesion of polydopamine in one-step method. Scanning electron micrography and electroosmotic flow were used to characterize the prepared single/dual-selector OT columns. Chiral separation of four chiral analytes (catechin/epicatechin, ephedrine/pseudoephedrine, ritodrine and salbutamol) was carried out in order to evaluate the performance of the prepared columns in OT-CEC with amperometric detection system. In terms of migration time, peak area, resolution, and selectivity factor of catechin/epicatechin and salbutamol, the run-to-run, day-to-day, and column-to-column repeatability were within 8.9%. Under the optimum conditions, the developed methods were applied for the analyses of Chinese herbal medicine Catechu herbs and salbutamol aerosol samples.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020)

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Negatively charged cyclodextrins: Synthesis and applications in chiral analysis-A review

The negatively charged cyclodextrins (CDs) play an important role in chiral analysis due to the additional electrostatic effect beyond the host-guest inclusion, especially in enantioanalysis of positively charged and electrically neutral analytes. This review presents recent advances in application of anionic CDs for enantioanalysis during the past five years. Firstly, the synthesis approaches of random substitution and single isomers of anionic CDs are briefly discussed. The main part focuses on the chiral analysis using anionic CDs in various analytical techniques, including capillary electrophoresis, high-performance liquid chromatography, capillary electrochromatography, counter current chromatography, nuclear magnetic resonance, etc. Particular attention is given to the capillary electrophoresis application since charged CDs could be used as a carrier of enantiomers by virtue of their self-mobility and offer an easy adjustment of the enantiomer migration order. Finally, future opportunities are also discussed in the conclusion of this review.

Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review

Capillary electrophoresis represents a promising technique in the field of pharmaceutical analysis. The presented review provides a summary of capillary electrophoretic methods suitable for routine quality control analyses of small molecule drugs published since 2015. In total, more than 80 discussed methods are sorted into three main sections according to the applied electroseparation modes (capillary zone electrophoresis, electrokinetic chromatography, and micellar, microemulsion, and liposome-electrokinetic chromatography) and further subsections according to the applied detection techniques (UV, capacitively coupled contactless conductivity detection, and mass spectrometry). Key parameters of the procedures are summarized in four concise tables. The presented applications cover analyses of active pharmaceutical ingredients and their related substances such as degradation products or enantiomeric impurities. The contribution of reported results to the current knowledge of separation science and general aspects of the practical applications of capillary electrophoretic methods are also discussed.

Enantiomeric determination of econazole and sulconazole by electrokinetic chromatography using hydroxypropyl-β-cyclodextrin combined with ionic liquids based on L-lysine and L-glutamic acid

Two analytical methodologies based on the combined use of hydroxypropyl-β-cyclodextrin and two different amino acid-based chiral ionic liquids (tetrabutylammonium-L-lysine or tetrabutylammonium-L-glutamic acid) in electrokinetic chromatography were developed in this work to perform the enantioselective determination of econazole and sulconazole in pharmaceutical formulations. The influence of different experimental variables such as buffer concentration, applied voltage, nature and concentration of the ionic liquid, temperature and injection time, on the enantiomeric separation was investigated. The combination of hydroxypropyl-β-cyclodextrin and tetrabutylammonium-L-lysine under the optimized conditions enabled to achieve the enantiomeric determination of both drugs with high enantiomeric resolution (3.5 for econazole and 2.4 for sulconazole). The analytical characteristics of the developed methodologies were evaluated in terms of linearity, precision, LOD, LOQ and recovery showing good performance for the determination of both drugs which were successfully quantitated in pharmaceutical formulations. This work reports the first analytical methodology enabling the enantiomeric determination of sulconazole in pharmaceutical formulations.

Advances in the Analysis of Veterinary Drug Residues in Food Matrices by Capillary Electrophoresis Techniques

In the last years, the European Commission has adopted restrictive directives on food quality and safety in order to protect animal and human health. Veterinary drugs represent an important risk and the need to have sensitive and fast analytical techniques to detect and quantify them has become mandatory. Over the years, the availability of different modes, interfaces, and formats has improved the versatility, sensitivity, and speed of capillary electrophoresis (CE) techniques. Thus, CE represents a powerful tool for the analysis of a large variety of food matrices and food-related molecules with important applications in food quality and safety. This review focuses the attention of CE applications over the last decade on the detection of different classes of drugs (used as additives in animal food or present as contaminants in food products) with a potential risk for animal and human health. In addition, considering that the different sample preparation procedures have strongly contributed to CE sensitivity and versatility, the most advanced sample pre-concentration techniques are discussed here.

Simultaneous separation and determination of seven isoflavones in Radix Puerariae by capillary electrophoresis with a dual cyclodextrin system

A simple, comprehensive and efficient capillary electrophoresis method using a dual cyclodextrin system was developed for the simultaneous determination of seven isoflavones (3'-methoxypuerarin, puerarin, 3'-hydroxypuerarin, ononin, daidzin, daidzein and genistin). Baseline separations of the seven isoflavones were achieved within 11 min with the running buffer consisting of 35 mm sodium tetraborate, 9.0 mm sulfobutylether-β-cyclodextrin and 30 mm α-cyclodextrin at pH 9.34, and peaks were detected at 254 nm. Other separation parameters included the separation voltage for 15 kV and the working temperature for 25°C. Under the optimum conditions, good linearities were obtained with linear correlation coefficients of seven isoflavones of 0.9978-0.9992. The limits of detection and the limits of quantification were 0.7-2.9 and 2.5-9.5 μg/mL, respectively. Excellent precision and accuracy were obtained. The intraday and interday precision ranged from 0.7 to 2.0% and from 0.8 to 1.9%, respectively. The recoveries of seven analytes were from 97.7 to 103.1%. This method was successfully applied to determine the seven analytes in Radix Puerariae and its preparations.

Enantiomeric separation of ivabradine by cyclodextrin-electrokinetic chromatography. Effect of amino acid chiral ionic liquids

A chiral methodology was developed for the first time to ensure the quality control of ivabradine, a novel anti-ischemic and heart rate lowering drug commercialized as a pure enantiomer. With this aim, electrokinetic chromatography (EKC) was employed and the enantiomeric separation of ivabradine was investigated using different anionic and neutral cyclodextrins (CDs) and amino acid-based chiral ionic liquids (CILs) as sole chiral selectors. Baseline separation was only achieved with sulfated CDs, and the best enantiomeric resolution was obtained with sulfated-γ-CD. Under the optimized conditions, ivabradine enantiomers were separated in 6 min with a resolution of 2.7. Nuclear magnetic resonance experiments showed a 1:1 stoichiometry for the enantiomer-CD complexes and apparent and averaged equilibrium constants were determined. The combined use of sulfated-γ-CD and different CILs as dual separation systems was investigated, resulting in a significant increase in the resolution. The use of 5 mM tetrabutylammonium-aspartic acid ([TBA][L-Asp]) in 50 mM formate buffer (pH 2.0) containing 4 mM sulfated-γ-CD were considered the best conditions in terms of resolution and migration times for ivabradine enantiomers. Nevertheless, as no inversion of the enantiomer migration order was observed when combining CILs and sulfated-γ-CD and a good enantiomeric resolution and efficiency were obtained using just sulfated-γ-CD as the sole chiral selector, the analytical characteristics of this method were evaluated, showing good recovery (98% and 103% for S- and R-ivabradine, respectively) and precision values (RSD < 5% for instrumental repeatability, < 6% for method repeatability and < 7% for intermediate precision). The limits of detection (LODs) were 0.22 and 0.28 μg mL^-1 for S- and R-ivabradine, respectively, and the method enabled to detect a 0.1% of the enantiomeric impurity, allowing to accomplish the requirements of the International Conference on Harmonisation (ICH) guidelines. Finally, the method was applied to the analysis of a pharmaceutical formulation of ivabradine. The content of R-ivabradine was below the LOD and the amount of S-ivabradine was in agreement to the labeled content.

Amino acid chiral ionic liquids combined with hydroxypropyl-β-cyclodextrin for drug enantioseparation by capillary electrophoresis

Four amino acid chiral ionic liquids were evaluated in dual systems with hydroxypropyl-β-cyclodextrin to investigate the enantioseparation by CE of a group of seven drugs as model compounds (duloxetine, verapamil, terbutaline, econazole, sulconazole, metoprolol, and nadolol). The use of two of these chiral ionic liquids (tetramethylammonium L-Lysine ([TMA][L-Lys]) and tetramethylammonium L-glutamic acid ([TMA][L-Glu])) as modifiers in CE is reported for the first time in this work whereas tetrabutylammonium L-lysine ([TBA][L-Lys]) and tetrabutylammonium L-glutamic acid ([TBA][L-Glu]) were employed previously in CE although very scarcely. The effect of the nature and the concentration of each ionic liquid added to the separation buffer containing the neutral cyclodextrin on the enantiomeric resolution and the migration time obtained for each drug, was investigated. A synergistic effect was observed when combining each chiral ionic liquid with hydroxypropyl-β-cyclodextrin in the case of the five compounds for which the cyclodextrin showed enantiomeric discrimination power when used as sole chiral selector (duloxetine, verapamil, terbutaline, econazole, sulconazole). Buffer concentration and pH, temperature and separation voltage were varied in order to optimize the enantiomeric separation of these five compounds using dual systems giving rise to resolutions ranging from 1.1 to 6.6.

A micellar electrokinetic chromatography approach using diastereomeric derivatization and a volatile surfactant for the enantioselective separation of selenomethionine

A MEKC methodology with UV detection was developed for the enantioselective separation of selenomethionine (SeMet). The use of (+)-1-(9-fluorenyl)ethyl chloroformate (FLEC) as chiral derivatization reagent to form SeMet diastereomers enabled their subsequent separation using ammonium perfluorooctanoate (APFO) as a volatile pseudostationary phase. The effect of APFO concentration and pH, temperature, injection volume, and derivatization conditions (time and FLEC/SeMet ratio) were evaluated in order to select the best separation conditions. A chiral resolution of 4.4 for DL-SeMet was achieved in less than 6 min using 100 mM APFO at pH 8.5 as electrophoretic buffer. Satisfactory results were obtained in terms of linearity, precision (RSD from 3.4 to 5.1% for migration times and from 1.8 to 4.6% for corrected peak areas), accuracy, and LODs (3.1 × 10^-6  M and 3.7 × 10^-6  M for d and l enantiomers, respectively). The method was successfully applied to the determination of l-SeMet in food supplements.

Recent advances in nanomaterial-based capillary electrophoresis

This review gives a summary of applications of different nanomateials, such as gold nanoparticles (AuNPs), carbon-based nanoparticles, magnetic nanoparticles (MNPs), and nano-sized metal organic frameworks (MOFs), in electrophoretic separations. This review also emphasizes the recent works in which nanoparticles (NPs) are used as pseudostationary phase (PSP) or immobilized on the capillary surface for enhancement of separation in CE, CEC, and microchips electrophoresis.

Chiral Selectors in Capillary Electrophoresis: Trends During 2017⁻2018

Chiral separation is an important process in the chemical and pharmaceutical industries. From the analytical chemistry perspective, chiral separation is required for assessing the fit-for-purpose and the safety of chemical products. Capillary electrophoresis, in the electrokinetic chromatography mode is an established analytical technique for chiral separations. A water-soluble chiral selector is typically used. This review therefore examines the use of various chiral selectors in electrokinetic chromatography during 2017–2018. The chiral selectors were both low and high (macromolecules) molecular mass molecules as well as molecular aggregates (supramolecules). There were 58 papers found by search in Scopus, indicating continuous and active activity in this research area. The macromolecules were sugar-, amino acid-, and nucleic acid-based polymers. The supramolecules were bile salt micelles. The low molecular mass selectors were mainly ionic liquids and complexes with a central ion. A majority of the papers were on the use or preparation of sugar-based macromolecules, e.g., native or derivatised cyclodextrins. Studies to explain chiral recognition of macromolecular and supramolecular chiral selectors were mainly done by molecular modelling and nuclear magnetic resonance spectroscopy. Demonstrations were predominantly on drug analysis for the separation of racemates.

Recent studies of docking and molecular dynamics simulation for liquid-phase enantioseparations

Liquid-phase enantioseparations have been fruitfully applied in several fields of science. Various applications along with technical and theoretical advancements contributed to increase significantly the knowledge in this area. Nowadays, chromatographic techniques, in particular HPLC on chiral stationary phase, are considered as mature technologies. In the last thirty years, CE has been also recognized as one of the most versatile technique for analytical scale separation of enantiomers. Despite the huge number of papers published in these fields, understanding mechanistic details of the stereoselective interaction between selector and selectand is still an open issue, in particular for high-molecular weight chiral selectors like polysaccharide derivatives. With the ever growing improvement of computer facilities, hardware and software, computational techniques have become a basic tool in enantioseparation science. In this field, molecular docking and dynamics simulations proved to be extremely adaptable to model and visualize at molecular level the spatial proximity of interacting molecules in order to predict retention, selectivity, enantiomer elution order, and profile noncovalent interaction patterns underlying the recognition process. On this basis, topics and trends in using docking and molecular dynamics as theoretical complement of experimental LC and CE chiral separations are described herein. The basic concepts of these computational strategies and seminal studies performed over time are presented, with a specific focus on literature published between 2015 and November 2018. A systematic compilation of all published literature has not been attempted.

Inverse cationic ITP for separation of methadone enantiomers with sulfated β-cyclodextrin as chiral selector

Chiral ITP of the weak base methadone using inverse cationic configurations with H⁺ as leading component and multiple isomer sulfated β-CD (S-β-CD) as leading electrolyte (LE) additive, has been studied utilizing dynamic computer simulation, a calculation model based on steady-state values of the ITP zones, and capillary ITP. By varying the amount of acidic S-β-CD in the LE composed of 3-morpholino-2-hydroxypropanesulfonic acid and the chiral selector, and employing glycylglycine as terminating electrolyte (TE), inverse cationic ITP provides systems in which either both enantiomers, only the enantiomer with weaker complexation, or none of the two enantiomers form cationic ITP zones. For the configuration studied, the data reveal that only S-methadone migrates isotachophoretically when the S-β-CD concentration in the LE is between about 0.484 and 1.113 mM. Under these conditions, R-methadone migrates zone electrophoretically in the TE. An S-β-CD concentration between about 0.070 and 0.484 mM results in both S- and R-methadone forming ITP zones. With >1.113 mM and < about 0.050 mM of S-β-CD in the LE both enantiomers are migrating within the TE and LE, respectively. Chiral inverse cationic ITP with acidic S-β-CD in the LE is demonstrated to permit selective ITP trapping and concentration of the less interacting enantiomer of a weak base.

Separation and determination of corynoxine and corynoxine B using chiral ionic liquid and hydroxypropyl-β-cyclodextrin as additives by field-amplified sample stacking in capillary electrophoresis

A sensitive, fast, and effective method, field-amplified sample stacking (FASS) in capillary electrophoresis, has been established for the separation and determination of corynoxine and corynoxine B. Hydroxypropyl-β-CD (HP-β-CD) and tetrabutylammonium-L-glutamic acid (TBA-L-Glu) were used as additives in the separation system. Electrokinetic injection was chosen to introduce sample from inlet at 10 kV for 50 s after a water plug (0.5 psi, 4 s) was injected to permit FASS. The running buffer (pH 6.1) was composed of 40 mM sodium dihydrogen phosphate solution, 130 mM HP-β-CD, and 10 mM TBA-L-Glu and the separation voltage was 20 kV. Under the optimum conditions, corynoxine and corynoxine B were successfully enriched and separated within 12 min and the sensitivity was improved approximately by 700-900 folds. Calibration curves were in a good linear relationship within the range of 62.5-5.00 × 10³  ng/mL for both corynoxine and corynoxine B. The limits of detection (S/N = 3) and quantitation (S/N = 10) were 14.9, 45.2 ng/mL for corynoxine and 11.2, 34.5 ng/mL for corynoxine B, respectively. Finally, this method was successfully applied for the determination of corynoxine and corynoxine B in the stems with hooks of Uncaria rhynchophylla and its formulations.