Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

Rapid evaluation of PHD2 inhibitory activity of natural products based on capillary electrophoresis online stacking strategy

Prolyl hydroxylase domain 2 (PHD2) is an important enzyme in the human body that perceives changes in oxygen concentration and regulates response in hypoxic environments. Evaluation of PHD2 inhibitory activity of natural products is crucial for drug development of hypoxia related diseases. At present, the detection of low concentration of α-ketoglutaric acid (the substrate of PHD2 enzymatic reaction) requires derivatization reactions or sample pretreatment, which undoubtedly increases the workload of PHD2 inhibitory activity evaluation. In this paper, a direct detection approach of α-ketoglutaric acid was established by using the online stacking strategy of capillary electrophoresis to evaluate the PHD2 inhibitory activity of natural products. Under optimized conditions, detection of a single sample can be achieved within 2 min. By calculation, the intraday precision RSD of the apparent electrophoretic mobility and peak areas of α-ketoglutaric acid are 0.92 % and 0.79 %, respectively, and the interday RSD were 1.27 % and 0.96 % respectively. The recoveries of the present approach were 97.9-105.2 %, and the LOQ and LOD were 2.0 μM and 5.0 μM, respectively. Furthermore, this approach was applied for the evaluation of inhibitory activity of PHD2 for 13 natural products, and PHD2 inhibitory activity of salvianolic acid A was firstly reported. The present work not only realizes evaluation of PHD2 inhibitory activity through direct detection of α-ketoglutaric acid, but also provides technical support for the discovery of potential drug molecules in hypoxia related diseases.

Microfluidics for personalized drug delivery

This review highlights the transformative impact of microfluidic technology on personalized drug delivery. Microfluidics addresses issues in traditional drug synthesis, providing precise control and scalability in nanoparticle fabrication, and microfluidic platforms show high potential for versatility, offering patient-specific dosing and real-time monitoring capabilities, all integrated into wearable technology. Covalent conjugation of antibodies to nanoparticles improves bioactivity, driving innovations in drug targeting. The integration of microfluidics with sensor technologies and artificial intelligence facilitates real-time feedback and autonomous adaptation in drug delivery systems. Key challenges, such as droplet polydispersity and fluidic handling, along with future directions focusing on scalability and reliability, are essential considerations in advancing microfluidics for personalized drug delivery.

Real-time and quantitative protein detection via polyacrylamide gel electrophoresis and online intrinsic fluorescence imaging

The detection of intrinsic protein fluorescence is a powerful tool for studying proteins in their native state. Thanks to its label-free and stain-free feature, intrinsic fluorescence detection has been introduced to polyacrylamide gel electrophoresis (PAGE), a fundamental and ubiquitous protein analysis technique, to avoid the tedious detection process. However, the reported methods of intrinsic fluorescence detection were incompatible with online PAGE detection or standard slab gel. Here, we fulfilled online intrinsic fluorescence imaging (IFI) of the standard slab gel to develop a PAGE-IFI method for real-time and quantitative protein detection. To do so, we comprehensively investigated the arrangement of the deep-UV light source to obtain a large imaging area compatible with the standard slab gel, and then designed a semi-open gel electrophoresis apparatus (GEA) to scaffold the gel for the online UV irradiation and IFI with low background noise. Thus, we achieved real-time monitoring of the protein migration, which enabled us to determine the optimal endpoint of PAGE run to improve the sensitivity of IFI. Moreover, online IFI circumvented the broadening of protein bands to enhance the separation resolution. Because of the low background noise and the optimized endpoint, we showcased the quantitative detection of bovine serum albumin (BSA) with a limit of detection (LOD) of 20 ng. The standard slab gel provided a high sample loading volume that allowed us to attain a wide linear range of 0.03-10 μg. These results indicate that the PAGE-IFI method can be a promising alternative to conventional PAGE and can be widely used in molecular biology labs.

Capillary electrophoresis in the analysis of therapeutic peptides-A review

Therapeutic peptides are a growing class of innovative drugs with high efficiency and a low risk of adverse effects. These biomolecules fall within the molecular mass range between that of small molecules and proteins. However, their inherent instability and potential for degradation underscore the importance of reliable and effective analytical methods for pharmaceutical quality control, therapeutic drug monitoring, and compliance testing. Liquid chromatography-mass spectrometry (LC-MS) has long time been the "gold standard" conventional method for peptide analysis, but capillary electrophoresis (CE) is increasingly being recognized as a complementary and, in some cases, superior, highly efficient, green, and cost-effective alternative technique. CE can separate peptides composed of different amino acids owing to differences in their net charge and size, determining their migration behavior in an electric field. This review provides a comprehensive overview of therapeutic peptides that have been used in the clinical environment for the last 25 years. It describes the properties, classification, current trends in development, and clinical use of therapeutic peptides. From the analytical point of view, it discusses the challenges associated with the analysis of therapeutic peptides in pharmaceutical and biological matrices, as well as the evaluation of CE as a whole and the comparison with LC methods. The article also highlights the use of microchip electrophoresis, nonaqueous CE, and nonconventional hydrodynamically closed CE systems and their applications. Overall, the article emphasizes the importance of developing new CE-based analytical methods to ensure the high quality, safety, and efficacy of therapeutic peptides in clinical practice.

Opportunities and challenges for sample preparation and enrichment in mass spectrometry for single-cell metabolomics

Single-cell heterogeneity in metabolism, drug resistance and disease type poses the need for analytical techniques for single-cell analysis. As the metabolome provides the closest view of the status quo in the cell, studying the metabolome at single-cell resolution may unravel said heterogeneity. A challenge in single-cell metabolome analysis is that metabolites cannot be amplified, so one needs to deal with picolitre volumes and a wide range of analyte concentrations. Due to high sensitivity and resolution, MS is preferred in single-cell metabolomics. Large numbers of cells need to be analysed for proper statistics; this requires high-throughput analysis, and hence automation of the analytical workflow. Significant advances in (micro)sampling methods, CE and ion mobility spectrometry have been made, some of which have been applied in high-throughput analyses. Microfluidics has enabled an automation of cell picking and metabolite extraction; image recognition has enabled automated cell identification. Many techniques have been used for data analysis, varying from conventional techniques to novel combinations of advanced chemometric approaches. Steps have been set in making data more findable, accessible, interoperable and reusable, but significant opportunities for improvement remain. Herein, advances in single-cell analysis workflows and data analysis are discussed, and recommendations are made based on the experimental goal.

Determination of ticagrelol in rat plasma and tablets by micellar electrokinetic chromatography coupled with large volume sample stacking: Application to a pharmacokinetic study

A method using micellar electrokinetic chromatography coupled with large-volume sample stacking for the determination of ticagrelol was developed and validated. The analysis was performed in a fused silica capillary (41.5 cm effective length, 50 μm diameter) with ultraviolet detection at 195 nm. The background electrolytes were 30 mM phosphate buffer of pH 3.0 with 120 mM sodium dodecylsulfate and 10 % (v/v) acetonitrile (120 s X 50 mbar; 20°C; -18 kV) and 30 mM borate buffer of pH 8.5 with 75 mM sodium dodecylsulfate (120 s X 50 mbar; 20°C; 25 kV); under acidic and alkaline conditions, respectively. The method was found to be reliable with respect to specificity, linearity of the calibration line (R2  > 0.99), repeatability (relative standard deviation 2.56%-3.34%), and accuracy (recovery in the range 101.21%-102.67%). The limits of detection and quantitation were 0.032, 0.071, and 0.087, 0.188 μg/mL, respectively. The method was successfully applied for the determination of ticagrelol concentrations in rat plasma and tablets with good recoveries and reproducibility. The presented method proved to be suitable for monitoring ticagrelor in rat plasma.

A comprehensive review of capillary electrophoresis-based techniques for erythropoietin isoforms analysis

Different CE techniques have been used to analyze erythropoietin. These techniques have been shown to be effective in differentiating and quantifying erythropoietin isoforms, including natural and recombinant origins. This review provides a comprehensive overview of various capillary electrophoresis-based techniques used for the analysis of erythropoietin isoforms. The importance of erythropoietin in clinical practice and the necessity for the accurate analysis of its isoforms are first discussed. Various techniques that have been used for erythropoietin isoform analysis are then described. The main body of the review focuses on the different capillary electrophoresis-based methods that have been developed for erythropoietin isoform analysis, including capillary zone electrophoresis and capillary isoelectric focusing. The advantages and drawbacks of each method as well as their applications are discussed. Suggestions into the future directions of the area are also described.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Sensitivity enhancement of capillary electrophoresis-frontal analysis-based method for characterization of drug-protein interactions using on-line sample preconcentration

Capillary electrophoresis-frontal analysis is one of the most frequently used approaches for the study of plasma protein-drug interactions as a substantial part of new drug development. However, the capillary electrophoresis-frontal analysis typically combined with ultraviolet-visible detection suffers from insufficient concentration sensitivity, particularly for substances with limited solubility and low molar absorption coefficient. The sensitivity problem has been solved in this work by its combination with an on-line sample preconcentration. According to the knowledge of the authors this combination has never been used to characterize plasma protein-drug binding. It resulted in a fully automated and versatile methodology for the characterization of binding interactions. Further, the validated method minimalizes the experimental errors due to a reduction in the manipulation of samples. Moreover, employing an on-line preconcentration strategy with capillary electrophoresis-frontal analysis using human serum albumin-salicylic acid as a model system improves the drug concentration sensitivity 17-fold compared to the conventional method. The value of binding constant (1.51 ± 0.63) · 104 L/mol obtained by this new capillary electrophoresis-frontal analysis modification is in agreement with the value (1.13 ± 0.28) ·104 L/mol estimated by a conventional variant of capillary electrophoresis-frontal analysis without the preconcentration step, as well as with literature data obtained using different techniques.

A biogenesis construction of CuO@MWCNT via Chenopodium album extract: an effective electrocatalyst for synaptic plasticity neurodegenerative drug pollutant detection

Clioquinol (CLQ) is one of the most toxic halogenated neurodegenerative drugs, and its synaptic plasticity effect directly affects human health and the environment. Cupric oxide (CuO) is an ideal electrocatalyst owing to its earth-abundance, non-toxic nature, and cost-effectiveness. Since phenolate oxygen and pyridine nitrogen in CLQ act as an electron donor and pave the way for detection with Cu2+ ions in the CuO. Designing the architecture of CuO with a multi-walled carbon nanotube (MWCNT) is a sensible strategy to improve the electrochemical activity of the developed sensor. Inspired by the bio-synthesis and green processing, we have demonstrated the in-situ synthesis of CuO nanosphere-decorated MWCNT by Chenopodium album leaf extract through a sonochemical approach and explored its electrochemical sensing performance toward CLQ. The physical comprehensive characterization of prepared nanocomposite was investigated by various microscopic and spectroscopic techniques. For comparison studies, the CuO nanosphere was prepared by the same preparation process without MWCNT. Based on the physical characterization outcomes, the morphological nature of CuO was observed to be a sphere-like structure, which was decorated on the MWCNT with an average crystallite size of 16 nm (± 1 nm). Based on the electrochemical studies, the fabricated nanocomposite exhibits a wider linear range of 0.025-1375 μM, with a minimum detection limit of 4.59 nM L-1 toward CLQ. The viability examination on the biological matrix obtained considerable spike recoveries.

Progress in on-line, at-line, and in-line coupling of sample treatment with capillary and microchip electrophoresis over the past 10 years: A review

The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.

Analytical Methods Based on Liquid Chromatography and Capillary Electrophoresis to Determine Neonicotinoid Residues in Complex Matrices. A Comprehensive Review

Neonicotinoids (NNIs) are neuro-active and systemic insecticides widely used to protect crops from pest attack. During the last decades, there has been an increase concern about their uses and toxic effects, especially to beneficial and non-target insects such as pollinators. To assess potential health hazards and the environmental impacts derived from NNIs uses, a great variety of analytical procedures for the determination of their residues and their metabolites at trace level in environmental, biological and food samples have been reported. Due to the complexity of the samples, efficient sample pretreatment methods have been developed, which include mostly clean-up and preconcentration steps. On the other hand, among the analytical techniques used for their determination, high-performance liquid chromatography (HPLC) coupled to ultraviolet (UV) or mass spectrometry (MS) detection is the most widely used, although capillary electrophoresis (CE) has also been employed in the last years, considering some improvements in sensitivity when coupling with new MS detectors. In this review, we present a critical overview of analytical methods based on HPLC and CE reported in the last decade, discussing relevant and innovative sample treatments for the analysis of environmental, food and biological samples.

Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone-releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.

In-line sample trap columns with diatomite for large-volume injection in CZE-IM-MS

The analysis of low-abundant compounds with capillary zone electrophoresis-drift-tube ion mobility spectrometry-mass spectrometry (CZE-DTIMS-MS) is compromised due to the low injectable sample volumes in CZE and low duty cycle in DTIMS. Fritless packed in-line trap columns, using solid-phase extraction sorbent particles, have been used to increase injection volumes in CZE, but these columns are difficult to prepare and exhibit rapidly increasing back pressures. To provide smooth and complete filling of trap columns as well as to ensure higher and sustained flow rates though the columns, blends of cation and anion exchange particles with diatomite were used. The application of diatomite blends ensured the use of trap columns for at least 100 injections, with maximum injection volumes over 10 µl, which corresponds to an enrichment factor of more than 1000 over conventional injections in CZE-MS, enabling the detection of low nM concentrations of N-glycans with CZE-IMS-MS.

Recent advances in microchip electrophoresis for analysis of pathogenic bacteria and viruses

Life-threatening diseases, such as hepatitis B, pneumonia, tuberculosis, and COVID-19, are widespread due to pathogenic bacteria and viruses. Therefore, the development of highly sensitive, rapid, portable, cost-effective, and selective methods for the analysis of such microorganisms is a great challenge. Microchip electrophoresis (ME) has been widely used in recent years for the analysis of bacterial and viral pathogens in biological and environmental samples owing to its portability, simplicity, cost-effectiveness, and rapid analysis. However, microbial enrichment and purification are critical steps for accurate and sensitive analysis of pathogenic bacteria and viruses in complex matrices. Therefore, we first discussed the advances in the sample preparation technologies associated with the accurate analysis of such microorganisms, especially the on-chip microfluidic-based sample preparations such as dielectrophoresis and microfluidic membrane filtration. Thereafter, we focused on the recent advances in the lab-on-a-chip electrophoretic analysis of pathogenic bacteria and viruses in different complex matrices. As the microbial analysis is mainly based on the analysis of nucleic acid of the microorganism, the integration of nucleic acid-based amplification techniques such as polymerase chain reaction (PCR), quantitative PCR, and multiplex PCR with ME will result in an accurate and sensitive analysis of microbial pathogens. Such analyses are very important for the point-of-care diagnosis of various infectious diseases.

Peptide mapping of proteins by capillary electromigration methods

This review article provides a wide overview of important developments and applications of capillary electromigration methods in the area of peptide mapping of proteins in the period 1997-mid-2022, including review articles on this topic. It deals with all major aspects of peptide mapping by capillary electromigration methods: i) precleavage sample preparation involving purification, preconcentration, denaturation, reduction and alkylation of protein(s) to be analyzed, ii) generation of peptide fragments by off-line or on-line enzymatic and/or chemical cleavage of protein(s), iii) postcleavage preparation of the generated peptide mixture for capillary electromigration separation, iv) separation of the complex peptide mixtures by one-, two- and multidimensional capillary electromigration methods coupled with mass spectrometry detection, and v) a large application of peptide mapping for variable purposes, such as qualitative analysis of monoclonal antibodies and other protein biopharmaceuticals, monitoring of posttranslational modifications, determination of primary structure and investigation of function of proteins in biochemical and clinical research, characterization of proteins of variable origin as well as for protein and peptide identification in proteomic and peptidomic studies.

Picomolar detection limits for glyphosate by two-dimensional column-coupled isotachophoresis/capillary zone electrophoresis-mass spectrometry

Capillary electrophoresis-mass spectrometry often lacks sufficient limits of detection for trace substances in the environment due to its low loadability. To overcome this problem, we conducted a feasibility study for column-coupling isotachophoresis to capillary electrophoresis-mass spectrometry. The first dimension isotachophoresis preconcentrated the analytes. The column-coupling of both dimensions was achieved by a hybrid capillary microfluidic chip setup. Reliable analyte transfer by voltage switching was enabled by an in-chip capacitively coupled contactless conductivity detector placed around the channel of the common section between two T-shaped crossings in the chip connecting both dimensions. This eliminated the need to calculate the moment of analyte transfer. A commercial capillary electrophoresis-mass spectrometry instrument with easily installable adaptations operated the setup. Prior to coupling isotachophoresis with capillary zone electrophoresis-mass spectrometry, both dimensions were optimized individually by simulations and verified experimentally. Both dimensions were able to stack/separate all degradation products of glyphosate, the most important herbicide applied worldwide. The first dimension isotachophoresis also removed phosphate, which is a critical matrix component in many environmental samples. Enrichment and separation of glyphosate and its main degradation product aminomethylphosphonic acid by the 2D setup provided an excellent limit of detection of 150 pM (25 ng/L) for glyphosate. This article is protected by copyright. All rights reserved.

In-line sample concentration in capillary electrophoresis by cyclodextrin to admicelle microextraction

Cyclodextrins (CDs) as a pseudophase in pseudophase-to-pseudophase microextraction (P²ME) in capillary zone electrophoresis (CZE) are proposed. In this P²ME mode called CD to admicelle ME, a long plug of dilute analyte solution prepared in cetyltrimethylammonium bromide (CTAB) at the critical micellar concentration was injected into the capillary. This formed CTAB admicelles at the interface between the solution and the negatively charged capillary surface, where the analytes were trapped. The injection of CD solution released the admicelles and the analytes from the capillary surface due to the formation of stable CD/CTAB inclusion complexes. The analytes are concentrated at the CD front during injection and voltage separation. Various neutral CDs were found to be effective for CD to admicelle ME. To implement this in-line sample concentration technique in CZE, CD concentration, sample injection time, and sample:CD solution injection ratio were optimized. The optimized conditions for five model anionic analytes, namely, 4-bromophenol, sulindac, sulfamethizole, 4-vinylbenzoic acid, and succinylsulfathiazole, were 20 mM α-CD in 20 mM sodium tetraborate (pH 9.2) solution, sample injection time of 370 s, and CD:sample injection ratio of 1:2. The sensitivity enhancement factors (SEFs) were between 112 and 168. The SEFs of sulindac and sulfamethizole in particular were similar to previously published off-line microextraction techniques, which are typically time-consuming. The calculated values of LOQ, intra-/inter-day (n = 6/n = 10, 3 days) repeatability, and linearity (R²) of CD to admicelle ME were 0.0125-0.05 µg/mL, 1.5-4.6%, 1.8-4.8%, and ≥0.999, respectively. Finally, the potential of CD to admicelle ME to the analysis of artificial urine samples was demonstrated.

A chemometric experimental design with three-step stacking capillary electrophoresis for analysis of five tobacco-specific nitrosamines in cigarette products

Tobacco-specific nitrosamines (TSNAs) as carcinogens endanger our health and life from cigarette products. However, the safe range of TSNAs levels in commercial cigarette products has not yet been established. For the purpose of safety and supervision, a three-step stacking approach including field amplified sample injection (FASI), sweeping, and analyte focusing by micelle collapse (AFMC), was developed for the simultaneous determination of five TSNAs levels in cigarette products. This approach also involved aspects of chemometric experimental design, including fractional factorial design and central composite design. After the multilevel optimization of the experimental design, the five TSNAs were well separated. The LOD (S/N = 3) values of the N´-nitrosonornicotine (NNN), N´-nitrosoanatabine (NAT), N´-nitrosoanabasine (NAB), 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in the FASI-sweeping-AFMC CE approach were 1.000 ng/mL, 0.500 ng/mL, 0.125 ng/mL, 1.000 ng/mL, and 0.500 ng/mL respectively. The results of relative standard deviation (RSD) and relative error (RE) were all less than 3.35%, demonstrating good precision and accuracy. Finally, this novel approach was further applied to monitor three commercial cigarette products, and a range of 250.1-336.6 ng/g for NNN, 481.6-526.7 ng/g for NAT, 82.2-247.6 ng/g for NAB, 167.7-473.7 ng/g for NNAL, and 39.4-246.7 ng/g for NNK could be observed among these. Based on these results, the novel CE stacking strategy was successfully applied for the analysis of five TSNAs levels in cigarette products and could serve as a tool for assays of quality control of nitrosamines.

Recent progress in analytical capillary isotachophoresis (2018 - March 2022)

This review brings a survey of papers on analytical capillary and microchip isotachophoresis published since 2018 until the first quarter of 2022. Theoretical papers extending fundamental knowledge include those on computer simulations that remain an important research tool useful in the design of electrolyte systems. Many papers are focused on instrumental aspects where new media including microfluidic devices and their hyphenation to various detection techniques bring remarkable results. Papers reporting analytical applications demonstrate the potential of contemporary analytical isotachophoresis. Although it is not being used on a mass scale, its special features are attracting continued interest resulting in applications of isotachophoresis both as a stand-alone analytical method and as a part of multidimensional separation techniques.

The First Online Capillary Electrophoresis-Microscale Thermophoresis (CE-MST) Method for the Analysis of Dynamic Equilibria-The Determination of the Acidity Constant of Fluorescein Isothiocyanate

This article presents the first successful application of a capillary electrophoresis-microscale thermophoresis tandem technique (CE-MST) for determining the values of equilibrium constant, realized by connecting online the CE and MST instruments using a fused-silica capillary. The acid-base dissociation of fluorescein isothiocyanate, expressed by the acidity constant value (pK_a), was used as a model. The measurement procedure consisted of introducing a mixture containing the analyte and a deliberately added interferent into the CE capillary, electrophoretic separation of the analyte from the interferent, the detection of the analyte with a CE-integrated detector, detection with a MST detector, and then stopping the flow temporarily by turning off the voltage source to conduct the thermophoretic measurement. The analysis of migration times, peak areas and MST responses obtained concurrently for the same sample allowed us to determine the pK_a value using three independent methods integrated within one instrumentation. The analyte was effectively separated from the interferent, and the acidity values turned out to be consistent with each other. An attempt was also made to replace the standard commercial CE instrument with a home-made portable CE setup. As a result, the similar pK_a value was obtained, at the same time proving the possibility of increasing cost efficiency and reducing energy consumption. Overall, the CE-MST technique has a number of limitations, but its unique analytical capabilities may be beneficial for some applications, especially when sample separation is needed prior to the thermophoretic measurement.

Capillary electrophoresis Western blot using inkjet transfer to membrane

Traditional Western blots are commonly used to separate and assay proteins; however, they have limitations including a long, cumbersome process and large sample requirements. Here, we describe a system for Western blotting where capillary gel electrophoresis is used to separate sodium dodecyl sulfate-protein complexes. The capillary outlet is threaded into a piezoelectric inkjetting head that deposits the separated proteins in a quasi-continuous stream of <100 pL droplets onto a moving membrane. Through separations at 400 V/cm and protein capture on a membrane moving at 2 mm/min, we are able to detect actin with a limit of detection at 8 pM, or an estimated 5 fg injected. Separation and membrane capture of sample containing 10 proteins ranging in molecular weights from 11 - 250 kDa was achieved in 15 min. The system was demonstrated with Western blots for actin, β-tubulin, ERK1/2, and STAT3 in human A431 epidermoid carcinoma cell lysate.

Isotachophoresis: Theory and Microfluidic Applications

Isotachophoresis (ITP) is a versatile electrophoretic technique that can be used for sample preconcentration, separation, purification, and mixing, and to control and accelerate chemical reactions. Although the basic technique is nearly a century old and widely used, there is a persistent need for an easily approachable, succinct, and rigorous review of ITP theory and analysis. This is important because the interest and adoption of the technique has grown over the last two decades, especially with its implementation in microfluidics and integration with on-chip chemical and biochemical assays. We here provide a review of ITP theory starting from physicochemical first-principles, including conservation of species, conservation of current, approximation of charge neutrality, pH equilibrium of weak electrolytes, and so-called regulating functions that govern transport dynamics, with a strong emphasis on steady and unsteady transport. We combine these generally applicable (to all types of ITP) theoretical discussions with applications of ITP in the field of microfluidic systems, particularly on-chip biochemical analyses. Our discussion includes principles that govern the ITP focusing of weak and strong electrolytes; ITP dynamics in peak and plateau modes; a review of simulation tools, experimental tools, and detection methods; applications of ITP for on-chip separations and trace analyte manipulation; and design considerations and challenges for microfluidic ITP systems. We conclude with remarks on possible future research directions. The intent of this review is to help make ITP analysis and design principles more accessible to the scientific and engineering communities and to provide a rigorous basis for the increased adoption of ITP in microfluidics.

Sensitive identification of milk protein allergens using on-line combination of transient isotachophoresis/micellar electrokinetic chromatography and capillary isoelectric focusing in fused silica capillary with roughened part

A method for on-line concentration of milk proteins from large sample volumes using combination of transient isotachophoresis (tITP) and micellar electrokinetic chromatography (MEKC) in fused silica capillary with an inner roughened part has been developed. The method utilizes reversible dynamic adsorption of proteins onto a thin layer of PEG 4000 on the roughened surface of the capillary. In addition, the tITP/MEKC method was combined with capillary isoelectric focusing (CIEF) for on-line concentration, separation, identification and sensitive determination of proteins in skimmed milk. The method allows analysis of up to 50 μL of sample. This study has focused on the four important whey proteins, bovine serum albumin (BSA), α-lactalbumin (α-LA), and two genetic variants of β-lactoglobulin (β-LG A and β-LG B). The proteins were identified on the basis of their migration times and characteristic pI values. The pI values of BSA, α-LA, β-LG A, and β-LG B were determined as 4.7, 4.4, 5.1, and 5.2, respectively. Limits of detection for BSA, α-LA and both β-LG variants were found as 1.2, 1.0 and 1.0 pg mL^-1, respectively. The linearity of calibration curves was characterized by the R² = 0.9982. The method provided highly reproducible results as the relative standard deviations of the migration times and peak areas of the examined proteins did not exceed 1.6%.

On-line Coupling of Aptamer Affinity Solid-Phase Extraction and Immobilized Enzyme Microreactor Capillary Electrophoresis-Mass Spectrometry for the Sensitive Targeted Bottom-Up Analysis of Protein Biomarkers

In this paper, we present a fully integrated valve-free method for the sensitive targeted bottom-up analysis of proteins through on-line aptamer affinity solid-phase extraction and immobilized enzyme microreactor capillary electrophoresis-mass spectrometry (AA-SPE-IMER-CE-MS). The method was developed analyzing α-synuclein (α-syn), which is a protein biomarker related to different neurodegenerative disorders, including Parkinson's disease. Under optimized conditions, on-line purification and preconcentration of α-syn, enzymatic digestion, electrophoretic separation, and identification of the tryptic peptides by mass spectrometry was achieved in less than 35 min. The limit of detection was 0.02 μg mL^-1 of digested protein (66.7% of coverage, i.e., 8 out of 12 expected tryptic peptides were detected). This value was 125 and 10 times lower than for independent on-line digestion by IMER-CE-MS (2.5 μg mL^-1) and on-line preconcentration by AA-SPE-CE-MS (0.2 μg mL^-1). The repeatability of AA-SPE-IMER-CE-MS was adequate (at 0.5 μg mL^-1,% RSD ranged from 3.7 to 16.9% for peak areas and 3.5 to 7.7% for migration times of the tryptic peptides), and the modified capillary could be reused up to 10 analyses with optimum performance, similarly to IMER-CE-MS. The method was subsequently applied to the analysis of endogenous α-syn from red blood cell lysates. Ten α-syn tryptic peptides were detected (83.3% of coverage), enabling the characterization and localization of post-translational modifications of blood α-syn (i.e., N-terminal acetylation).

Application of Capillary Electromigration Methods in the Analysis of Textile Dyes-Review

Fiber traces are one of (micro)traces that can be found at a crime scene. They are easily transferable and, like other forms of evidence, can provide a link between a suspect and a victim. The main purpose of this review is to present methods developed to examine textile dyes extracted for forensic purposes using different capillary electromigration methods (CEMs). Scientific papers, mainly from the 20th century, provide reliable methods for the separation of water-soluble dyes. However, dyes insoluble in aqueous solutions have been and still are a challenge. Another problem is the sensitivity of the developed methods, which is, in most cases, insufficient for forensic examination of dyes extracted from a single fiber preserved at the crime scene. Although the methodologies already developed and presented in this review have the potential to be applied in a comparative analysis of textile dye traces, there seems to be a lot of work to be conducted. Some ideas on how to resolve these problems are presented and discussed in the article.

Determination of pepsin by capillary electrophoresis using mixed polymer coated capillary with switchable properties towards protein adsorption/desorption

In this work, a simple on-line preconcentration method for quantitative detection of pepsin was realized by using the binary mixed polymer brushes coated capillary with switchable properties towards protein adsorption. Firstly, the binary mixed polymer brushes were prepared by grafting poly(2-methyl-2-oxazoline) and poly(4-vinylpyridine) onto the inner wall of the capillary through polydopamine anchor. Then the coatings were characterized by X-ray photoelectron spectrometer and electroosmotic flow measurement. The results indicated that the composition of coating could be controlled by varying the feed ratio of poly(2-methyl-2-oxazoline) to poly(4-vinylpyridine) and the inner surface charge could be tuned toward the change of pH and ionic strength. The results showed when poly(2-methyl-2-oxazoline)/poly(4-vinylpyridine) mass ratio was 80/20, the highest on-line preconcentration effect was obtained and the sensitivity enhancement factor was 6.3. Moreover, satisfactory sensitivity (limit of detection: 7.5 ng/mL) and good repeatability were obtained with on-line preconcentration method. The polymer coated capillary was still stable for on-line preconcentration and detection of pepsin after 50 consecutive runs. Lastly, the proposed method was used successfully to on-line preconcentrate pepsin in saliva matrix. This article is protected by copyright. All rights reserved.

Applications of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical and food analysis (2019-2021)

So far, the potential of capillary electrophoresis (CE) in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption and low cost. This review examines the implementations and advancements of CE in different application fields (environmental, pharmaceutical, clinical and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used UV-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review is focused on the development of CE in the fields of environmental, pharmaceutical, clinical and food analysis, the new sample pretreatment techniques of microextraction and enrichment which fit excellently to CE in recent three years are also described briefly. This article is protected by copyright. All rights reserved.

Automated Sequential Injection-Capillary Electrophoresis for Dried Blood Spot Analysis: A Proof-of-Concept Study

A hyphenated analytical platform that enables fully automated analyses of dried blood spots (DBSs) is proposed by the at-line coupling of sequential injection (SI) to capillary electrophoresis (CE). The SI system, exploited herein for the first time for unattended DBS handling, serves as the "front end" mesofluidic platform for facilitating exhaustive elution of the entire DBS by flow programming. The DBS eluates are thus free from hematocrit and nonhomogeneity biases. The SI pump transfers the resulting DBS eluates into CE sample vials through an internal port of the CE instrument and homogenizes the eluates, whereupon the eluted blood compounds are automatically injected, separated, and quantified by the CE instrument. The SI and CE are commercially available off-the-shelf instruments and are interconnected through standard nuts, ferrules, and tubing without additional instrumental adjustments. They are controlled by dedicated software and are synchronized for a fully autonomous operation. The direct determination of endogenous (potassium and sodium) and exogenous (lithium as a model drug) inorganic cations in DBS samples has been used for the proof-of-concept demonstration. The hyphenated SI-CE platform provides excellent precision of the analytical method with relative standard deviation (RSD) values of peak areas below 1.5 and 3.5% for intraday and interday analyses, respectively, of the endogenous concentrations of the two inorganic cations. For the determination of lithium, calibration is linear in a typical clinical range of the drug (R² better than 0.9993 for 2-20 mg/L), RSD values of peak areas are below 4.5% (in the entire calibration range), the limit of detection (0.4 mg/L) and the limit of quantification (1.3 mg/L) are well below the drug's minimum therapeutic concentration (4 mg/L), and total analysis time is shorter than 5 min. The SI-CE platform reflects the actual trends in the automation of analytical methods, offers rapid and highly flexible DBS elution/analysis processes, and might thus provide a general solution to modern clinical analysis as it can be applied to a broad range of analytes and dried biological materials.

Improved Sensitivity to Determine Antibiotic Residues in Chicken Meat by In-Line Solid-Phase Extraction Coupled to Capillary Electrophoresis-Tandem Mass Spectrometry

Traditionally, capillary electrophoresis (CE) has been ruled out of many food safety applications, despite its inherent advantages, because its concentration sensitivity has been not high enough, mainly in relation to the monitoring of contaminants and residues, such as pesticides, veterinary medicines, environmental contaminants, toxins, etc. For this reason, researchers have proposed several strategies to overcome this limitation. So far, approaches based on chromatographic principles have been the most successful solutions. These approaches, known as in-line solid phase extraction, consist of the introduction of a small amount of stationary phase in the inlet section of the electrophoretic capillary (analyte concentrator, AC) to retain the analytes before separation takes place. In this chapter, this strategy is applied to CE coupled to tandem mass spectrometry (MS/MS) for the multiresidue detection of quinolone antibiotic residues in chicken meat. A previous sample treatment based on pressurized liquid extraction to obtain an optimum performance is also described.

Micelle to cyclodextrin stacking in open-tubular liquid chromatography using capillaries coated with surfactant admicelles

In-line sample concentration by micelle to cyclodextrin stacking (MCDS) in open-tubular liquid chromatography (OT-LC) with UV detection is described. OT-LC of two sets of analytes (small-molecule drugs and neutral alkenylbenzenes) was by the use of a fused-silica capillary that was coated with admicelles of didodecyldimethyl ammonium bromide (DDAB). These admicelles acted as a stationary chromatographic pseudophase. The mobile phase was 25 mM sodium tetraborate in 10% methanol, pH 9.2. MCDS was by long pressure injection of samples prepared in 10 mM hexadecyltrimethyl ammonium bromide (CTAB) in 25 mM sodium tetraborate, pH 9.2 (buffer), followed by injection of 50 mM α-CD in buffer (CD solution). Stacking was by application of voltage at -20 kV prior to pressure-driven OT-LC. The factors that influenced MCDS such as type and concentration of CD, concentration of CTAB in the sample, injection time ratio of the sample and the CD solution and stacking time were studied. Under optimised conditions, sensitivity enhancement factors (SEFs) were between 19 and 23, linear ranges were between 0.5 and 10 µg/mL with r² > 0.99 and inter-day/intra-day repeatability in retention time and peak area were ≤5.6% for the model small-molecule drugs. Application to real samples was by the determination of potentially toxic alkenylbenzenes (SEFs = 10 to 12) in basil-leaf and whole-clove extracts. The assay results were comparable to those obtained from an in-house high-performance liquid chromatography-UV method.

Lactate and pyruvate levels correlation with lactate dehydrogenase gene expression and glucose consumption in Tamoxifen-resistant MCF-7 cells using capillary electrophoresis with contactless conductivity detection (CE-C4 D)

Breast cancer is the second leading cause of cancer death in women after lung cancer. The first-line treatment of metastatic breast cancer in premenopausal women relies on tamoxifen. The development of tamoxifen resistance is not fully understood. In this study, capillary electrophoresis with capacitively coupled contactless conductivity detector was developed to monitor the changes in lactate and pyruvate levels in supernatant media of three models of developed MCF-7 tamoxifen-resistant cells and correlate these metabolites changes with lactate dehydrogenase genes expression and glucose consumption. The electrophoretic separation was achieved under reversed electroosmotic flow conditions. The linear ranges were 0.15-5 and 0.01-1 mM with a correlation coefficient of 0.9966 and 0.9971 and the limits of detection were 0.01 and 0.02 μM for lactate and pyruvate, respectively. Inter- and intrarun accuracy were in the range of 96.88-105.94% with precision (CV, %) of ≤7.35%. The method was completely validated and the results were in agreement with those obtained using the lactate and glucose assay kits. The results revealed a significant increase in both lactate and pyruvate production in the three tamoxifen-resistant MCF-7 cells models compared to control cells. This increase was correlated with the increase of lactate dehydrogenase genes expression and the increase of glucose consumption.

Volatile free liquid membranes for electromembrane extraction

Volatile solvents are excellent extraction media for liquid-liquid extractions. However, their use in supported liquid membranes (SLMs) is limited by their evaporation from SLM and thus poor SLM stability and they have never been considered truly useful for electromembrane extraction (EME). In this contribution, volatile solvents were systematically investigated as liquid membranes for EME and their extraction characteristics were comprehensively examined for the first time. A short plug of a water immiscible volatile solvent (a free liquid membrane (FLM)) was sandwiched between two aqueous plugs (donor and acceptor solutions) in a narrow-bore polymeric tubing. Evaporation of the volatile FLM was thus completely avoided and excellent stability of the phase interface was ensured. Suitability of volatile FLMs for EMEs was justified by μ-EMEs of nortriptyline, haloperidol, loperamide and papaverine as model non-polar basic drugs. Extraction performance of μ-EME through ethyl acetate was comparable or better to that through standard non-volatile EME solvents and a high extraction selectivity was achieved for nortriptyline and haloperidol extracted through chloroform. μ-EMEs through the volatile FLMs were characterized by high extraction recoveries (62%-99% for standards and 40-89% for body fluids), low electric currents (10-1380 nA), no susceptibility to matrix ions and suitability for pretreatment of raw body fluids (human urine and serum). Resulting extracts were analysed by capillary electrophoresis with ultraviolet detection (CE/UV). Repeatability of the μ-EME-CE/UV method was excellent with intra-day and inter-day RSD values 0.8-3.2% and 1.8-4.6%, respectively. Further experiments demonstrated additional advantages of volatile FLMs by nearly exhaustive μ-EMEs of atenolol as the polar basic drug with no need for FLM modification by ionic carriers. The presented comprehensive examination of volatile solvents has broadened the range of liquid membranes suitable for EME and it is believed that this proof-of-concept study will stimulate further interest in a deeper investigation of volatile phase interfaces in EME.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Peptidomics and Capillary Electrophoresis

Peptides play a crucial role in many vitally important functions of living organisms. The goal of peptidomics is the identification of the "peptidome," the whole peptide content of a cell, organ, tissue, body fluid, or organism. In peptidomic or proteomic studies, capillary electrophoresis (CE) is an alternative technique for liquid chromatography. It is a highly efficient and fast separation method requiring extremely low amounts of sample. In peptidomic approaches, CE is commonly combined with mass spectrometric (MS) detection. Most often, CE is coupled with electrospray ionization MS and less frequently with matrix-assisted laser desorption/ionization MS. CE-MS has been employed in numerous studies dealing with determination of peptide biomarkers in different body fluids for various diseases, or in food peptidomic research for the analysis and identification of peptides with special biological activities. In addition to the above topics, sample preparation techniques commonly applied in peptidomics before CE separation and possibilities for peptide identification and quantification by CE-MS or CE-MS/MS methods are discussed in this chapter.

Authenticity assessment of dairy products by capillary electrophoresis

Milk and derivatives are a very important part in the diet of the world population. Products from goat, buffalo, and sheep species have a greater economic value than the cow ones, therefore, authenticity frauds by improperly adding cow's milk occur frequently: dairy products are among the seven more attractive foods for adulteration. Milk from each of the above-cited animal species has its own definite profile of whey proteins (variants of α-lactalbumin and β-lactoglobulin) and its definite profile of caseins (variants of α_S1 -, α_S2 -, β-, and κ-casein). Such proteins can be usefully exploited as markers of authenticity by using capillary electrophoresis which is the technique of choice for the analysis of proteins. Due to the multiple adjustable parameters that are unknown to other analytical techniques, capillary electrophoresis is able to detect frauds in milk mixtures and cheese with little use of solvents, fast analysis time, and ease of operation. This makes it attractive and competitive for routine checks that are very important to fight the adulteration market. Advantages and limitations are discussed.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

A hybrid nano-MOF/polymer material for trace analysis of fluoroquinolones in complex matrices at microscale by on-line solid-phase extraction capillary electrophoresis

A hybrid material (nano-metal organic framework@organic polymer, named as nano-MOF@polymer) was applied for the first time as sorbent for on-line solid-phase extraction capillary electrophoresis with ultraviolet detection (SPE-CE-UV). The resulting material was prepared building layer-by-layer a HKUST-1 (Hong Kong University of Science and Technology-1) nano-MOF onto the polymer surface, which allowed controlling the thickness and maximizing the active surface area. The sorbent was widely characterized at micro- and nano-scale to validate the synthesis and to establish the material properties. Then, fritless microcartridges (2 mm) were assembled by packing only a few micrograms of sorbent particles and investigated for preconcentration of fluoroquinolones (FQs) in several real samples (river water, human urine and whole cow milk). Under the optimized conditions, the sample (ca. 60 μL) was loaded in separation background electrolyte (BGE, 50 mM phosphate (pH 7)), and retained analytes were eluted using a small volume of 2% v/v formic acid in methanol (ca. 50 nL). The SPE-CE-UV method was validated in terms of linearity, limit of detection (LOD), limit of quantification (LOQ), repeatability, reproducibility and reusability. The developed method showed a LOD decreasing until 1 ng L^-1 when larger volumes of sample were loaded (ca. 180 μL), which was 500,000 times lower than by CE-UV. This undescribed sensitivity enhancement would arise from the homogenous and populated MOF nano-domains and the appropriate permeability of the hybrid material, which would promote high extraction efficiency and loading capacity. Furthermore, the sorbent showed appropriate selectivity regardless the analyzed complex environmental, biological or food matrix samples, achieving excellent detectability and recoveries (>90%).

Investigation of selected parameters of capillary zone electrophoresis method for analysis of isolates of outer membrane vesicles

The capillary zone electrophoresis (CZE) has recently been proposed by our group as a novel technique for outer membrane vesicles (OMVs) characterization (J. Chromatography 1621 (2020) 461047). In present work the impact of selected parameters of CZE method on OMVs isolates analysis was assessed. It was shown that the extension of sample injection plug length significantly improves the detectability of macromolecular aggregates in CZE. Moreover, a negligible adsorption of OMVs to both uncoated and polymer-modified (poly(DMA-GMA-MAPS)) capillary walls was proven. Finally, the relaxation effect as well as deformation/polarization of vesicles were demonstrated to affect OMVs electrophoretic mobility. The significance of these findings was discussed.