Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020)

The separation of cyclic diadenosine diphosphorothioate and the diastereomers of its difluorinated derivative and the estimation of the binding constants and ionic mobilities of their complexes with 2-hydroxypropyl-β-cyclodextrin by affinity capillary electrophoresis

The incorporation of phosphorothioate linkages has recently been extensively employed in therapeutic oligonucleotides. For their separation and quality control, new high-efficient and high-sensitive analytical methods are needed. In this work, a new affinity capillary electrophoresis method has been developed and applied for the separation of a potential anticancer drug, 2',3'-cyclic diadenosine diphosphorothioate (Rp, Rp) (ADU-S100), and three recently newly synthesized diastereomers of its difluorinated derivative, 3',3'-cyclic di(2'-fluoro, 2'-deoxyadenosine phosphorothioate). The separation was performed in the various background electrolytes (BGEs) within a pH range 5-9 using several native and derivatized cyclodextrins (CDs) as chiral additives of the BGE. Relatively good separations were obtained with β-, γ-, and 2-hydroxypropyl-γ-CDs in some of the BGEs tested. However, the best separation was achieved using the 2-hydroxypropyl-β-CD chiral selector at 43.5 mM average concentration in the BGE composed of 40 mM Tris, 40 mM tricine, pH 8.1. Under these conditions, all the previous four cyclic dinucleotides (CDNs) were baseline separated within 4 min. Additionally, the average apparent binding constants and the average actual ionic mobilities of the complexes of all four CDNs with 2-hydroxypropyl-β-CD in the above BGE were determined. The formed complexes were found to be relatively weak, with the average apparent binding constants in the range of 12.2-94.1 L mol-1 and with the actual ionic mobilities spanning the interval (-7.8 to -12.7) × 10-9 m2 V-1 s-1. The developed method can be applied for the separation, analysis, and characterization of the above and similar CDNs.

Rapid enantiomeric separation of indacaterol by electrokinetic chromatography

The first chiral methodology enabling the separation of indacaterol enantiomers was developed in this work by cyclodextrin-electrokinetic chromatography. Indacaterol (IND) is a chiral drug marketed as a pure enantiomer. Then, the separation and quantification of each enantiomer is of great importance for the quality control of pharmaceutical formulations. After selecting the most suitable chiral selector and background electrolyte, two Box-Behnken designs were achieved to optimize the electrophoretic conditions using two different approaches to shorten analysis times: i) decreasing the capillary length, or ii) performing a short-end injection. Indacaterol enantiomers were separated in less than 5 min with a resolution value of 3.6 under the optimal separation conditions: 0.7% (m/v) carboxymethyl-α-cyclodextrin in 50 mM sodium formate buffer (pH 4.0) and using a short-end injection. Then, the analytical characteristics of the method were evaluated and LODs of 0.05 mg/L for S-IND and 0.04 mg/L for R-IND were achieved. Also, the method allowed the detection of a 0.1% enantiomeric impurity (S-IND) in the R-IND-based pharmaceutical formulations. The developed method was applied to the analysis of two pharmaceutical formulations. Percentages of 97 ± 3% and 103 ± 6% of R-IND with respect to the labeled amounts were found.

Relevance of the calculation of the diffusion coefficient in a capillary electrophoresis experiment

This paper analyzes the role of the diffusion coefficient in the movement of analytes that can reversibly react with a selector given a product in the presence of drift. The problem mimics the movement of enantiomers in a capillary electrophoresis experiment. As is well known, the signal in the capillary must be sharp enough to make a good determination of the effective mobility of the analytes being analyzed. The essence of the technique is based on fast interconversion rates. Therefore, the effective diffusion coefficient must be negligible during the experiment. In the present work, an exact expression for both the apparent mobility and the diffusion coefficient is obtained. This is done by writing the rate equations governing the process and solving them using the generating function technique. The effective mobility coincides with the Wren and Rowe equation, whereas the diffusion coefficient allows us to determine the values of the parameters to be taken into account so that this quantity is minimal or close to zero. On the other hand, the numerical solution of the kinetic equations and Monte Carlo simulations allow us to follow the signal in the capillary and to determine its space-time evolution.

Recent developments in capillary and microchip electroseparations of peptides (2021-mid-2023)

This review article brings a comprehensive survey of developments and applications of high-performance capillary and microchip electromigration methods (zone electrophoresis in a free solution or in sieving media, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, micropreparation, and physicochemical characterization of peptides in the period from 2021 up to ca. the middle of 2023. Progress in the study of electromigration properties of peptides and various aspects of their analysis, such as sample preparation, adsorption suppression, electroosmotic flow regulation, and detection, are presented. New developments in the particular capillary electromigration methods are demonstrated, and several types of their applications are reported. They cover qualitative and quantitative analysis of synthetic or isolated peptides and determination of peptides in complex biomatrices, peptide profiling of biofluids and tissues, and monitoring of chemical and enzymatic reactions and physicochemical changes of peptides. They include also amino acid and sequence analysis of peptides, peptide mapping of proteins, separation of stereoisomers of peptides, and their chiral analyses. In addition, micropreparative separations and physicochemical characterization of peptides and their interactions with other (bio)molecules by the above CE methods are described.

Capillary electrophoresis in the analysis of therapeutic peptides-A review

Therapeutic peptides are a growing class of innovative drugs with high efficiency and a low risk of adverse effects. These biomolecules fall within the molecular mass range between that of small molecules and proteins. However, their inherent instability and potential for degradation underscore the importance of reliable and effective analytical methods for pharmaceutical quality control, therapeutic drug monitoring, and compliance testing. Liquid chromatography-mass spectrometry (LC-MS) has long time been the "gold standard" conventional method for peptide analysis, but capillary electrophoresis (CE) is increasingly being recognized as a complementary and, in some cases, superior, highly efficient, green, and cost-effective alternative technique. CE can separate peptides composed of different amino acids owing to differences in their net charge and size, determining their migration behavior in an electric field. This review provides a comprehensive overview of therapeutic peptides that have been used in the clinical environment for the last 25 years. It describes the properties, classification, current trends in development, and clinical use of therapeutic peptides. From the analytical point of view, it discusses the challenges associated with the analysis of therapeutic peptides in pharmaceutical and biological matrices, as well as the evaluation of CE as a whole and the comparison with LC methods. The article also highlights the use of microchip electrophoresis, nonaqueous CE, and nonconventional hydrodynamically closed CE systems and their applications. Overall, the article emphasizes the importance of developing new CE-based analytical methods to ensure the high quality, safety, and efficacy of therapeutic peptides in clinical practice.

Applications of electrophoresis for small enantiomeric drugs in real-world samples: Recent trends and future perspectives

Separation and identification of chiral molecules is a topic widely discussed in the literature and of fundamental importance, especially in the pharmaceutical and food fields, both from industrial and laboratory points of view. Several techniques are used to carry out these analyses, but high-performance liquid chromatography is often the "gold standard." The high costs of chiral columns, necessary for this technique, led researchers to look for an alternative, and capillary electrophoresis (CE) is a technique capable of overcoming some of the disadvantages of liquid chromatography, often providing comparable results in terms of sensitivity and robustness. We addressed this topic, already widely discussed in the literature, providing an overview of the last 6 years of the most frequent and recent applications of CE. To make the manuscript more effective, we decided to divide it into paragraphs that represent the main field of application, from enantioseparation in complex matrices (pharmacokinetic studies or toxicological dosage of drugs, analysis of environmental pollutants, and analyses of foods) to quality control analyses on pharmaceutical formulas. About these, which are the fields of most meaningful use, we mentioned some of the most innovative and performing methods, with a look to the future on the application of new materials used, such as chiral selectors, that can make these types of analyses accessible to all, reducing cost, time, and excessive use of toxic solvents.

Quality by design-guided development of a capillary electrophoresis method for the simultaneous chiral purity determination and impurity profiling of tamsulosin

Analytical Quality by Design principles using the design of experiments were applied for the development of a capillary electrophoresis method for the determination of enantiomeric purity and chemically related impurities of tamsulosin. From initial scouting experiments, a dual cyclodextrin (CD) system composed of sulfated β-CD and carboxymethyl-α-CD was selected as the chiral selector. A fractional factorial resolution V+ design was used for the identification of the critical process parameters, while a face-centered central composite design and Monte Carlo simulations were employed for final optimization and defining the design space of the method. The experimental conditions of the working point were: 30 mM sodium phosphate buffer, pH 3.0, containing 40 mg/mL sulfated β-CD and 7 mg/mL carboxymethyl-α-CD, capillary temperature 18°C, applied voltage -23 kV. Following the assessment of robustness by applying a Plackett-Burman design, the method was validated according to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use guideline Q2(R1). The method allowed the quantification of the chiral impurity and three other related impurities at the 0.1 % level with acceptable accuracy and precision.

Recent developments in electromigration techniques related to pharmaceutical and biomedical analysis - A review

The analysis of pharmaceutical compounds is an important research topic as the use of different drugs affects people's daily life for the treatment of diseases. In addition to the widespread use of the internet, counterfeit drugs have appeared in the market. The development of modern analytical techniques, reliable, precise, sensitive, and rapid methods, has provided powerful means of analysis used in various fields such as drug production, quality control, determination of impurities and/or metabolites, biochemistry, pharmacokinetics, etc. Analytical techniques so far used in the pharmaceutical analysis include high-performance liquid chromatography (HPLC), gas chromatography (GC), super/sub-critical fluid chromatography (SFC), and capillary electromigration techniques such as capillary electrophoresis (CE) and rather rarely capillary electrochromatography (CEC). CE has some advantages over other techniques, e.g., very high efficiency, reduced costs (use of minute volumes of solvents and samples), the possibility to use different separation mechanisms, etc. In this review paper, the main features and limitations of the capillary electromigration techniques (especially CE) are discussed. Some selected applications of CE to the analysis of pharmaceutical compounds published in the period 2021-2023 (May) are reported.

Developments in on-line, post separation sample manipulation in the last 22 years: Pharmaceutical and biomedical applications

On-line post separation sample manipulation is a powerful approach increasing the sensitivity and selectivity in chemical analysis. Post separation sample manipulation includes the treatment of the analytes after their separation through a suitable separation technique, mainly liquid chromatography and capillary electrophoresis. Typically, post separation approaches include either the addition of a reagent/solvent to derivatize the analyte/enhance the sensitivity, pH change, or the conversion of the analyte through a photochemical/electrochemical system (reagent-free systems). This review focuses on the developed methods using post-column manipulation of sample with pharmaceuticals and biomedical applications, covering the period from 2000 to midle-2023. Chemistries combined with fluorescence, UV-vis and mass spectrometric detection are discussed employing both liquid chromatography and electrophoretic techniques for separation. Noteworthy instrumental modifications are also discussed.

Carboxymethylated maltodextrin as a chiral selector for the separation of some basic drug enantiomers using capillary electrophoresis

In this work, carboxymethylated maltodextrin (Cm-MD) was successfully synthesized as an efficient anionic chiral selector and applied for the enantiomer separation of some basic drugs including tramadol, venlafaxine, verapamil, hydroxyzine, citalopram, fluoxetine, and amlodipine by capillary electrophoresis (CE). The synthesized chiral selector was characterized by the nuclear magnetic resonance and Fourier transform infrared spectrophotometry. Under the optimized Cm-MD modified CE conditions (background electrolyte: phosphate buffer (pH 5.0, 50 mM) containing 5% (w/v) Cm-MD; applied voltage: 20 kV; and capillary column temperature: 25 °C), successful enantiomer separation of all studied chiral drugs were observed. By comparison of Cm-MD and MD for enantiomer separation of the model drugs, it was revealed that Cm-MD exhibits a higher resolution in comparison to the MD modified CE. This enhanced resolution could be attributed to the electrostatic interactions between the cationic drugs and anionic Cm-MD and opposite direction mobility of the host-guest complex relative to the chiral analyte. The optimized Cm-MD modified CE method was successfully used for the assay of the enantiomers of citalopram and venlafaxine in commercial tablets. The proposed method showed the linear range of 5.0-150.0 mg/L and 10.0-150.0 mg/L for both enantiomers of citalopram and venlafaxine, respectively. The limits of quantification were 5.0 and 10.0 mg/L for the enantiomers of citalopram and venlafaxine, respectively. The limit of detection for all enantiomers was found to be < 3.0 mg/L. Intra- and inter-day RSDs (n = 4) were less than 9.7%. The relative errors were less than 9.4% for all enantiomers. The obtained results in this research show that Cm-MD as a new, efficient and inexpensive chiral selector can be used for enantiomer separation of basic drugs using the CE technique.

A comprehensive review of capillary electrophoresis-based techniques for erythropoietin isoforms analysis

Different CE techniques have been used to analyze erythropoietin. These techniques have been shown to be effective in differentiating and quantifying erythropoietin isoforms, including natural and recombinant origins. This review provides a comprehensive overview of various capillary electrophoresis-based techniques used for the analysis of erythropoietin isoforms. The importance of erythropoietin in clinical practice and the necessity for the accurate analysis of its isoforms are first discussed. Various techniques that have been used for erythropoietin isoform analysis are then described. The main body of the review focuses on the different capillary electrophoresis-based methods that have been developed for erythropoietin isoform analysis, including capillary zone electrophoresis and capillary isoelectric focusing. The advantages and drawbacks of each method as well as their applications are discussed. Suggestions into the future directions of the area are also described.

From capillaries to microchips, green electrophoretic features for enantiomeric separations: A decade review (2013-2022)

Enantioseparation by the electromigration-based method is well-established and widely discussed in the literature. Electrophoretic strategies have been used to baseline resolve complex enantiomeric mixtures, typically using a selector substance into the background electrolyte (BGE) from capillaries to microchips. Along with developing new materials/substances for enantioseparations, it is the concern about the green analytical chemistry (GAC) principles for method development and application. This review article brings a last decade's update on the publications involving enantioseparation by electrophoresis for capillary and microchip systems. It also brings a critical discussion on GAC principles and new green metrics in the context of developing an enantioseparation method. Chemical and green features of native and modified cyclodextrins are discussed. Still, given the employment of greener substances, ionic liquids and deep-eutectic solvents are highlighted, and some new selectors are proposed. For all the mentioned selectors, green features about their production, application, and disposal are considered. Sample preparation and BGE composition in GAC perspective, as well as greener derivatization possibilities, were also addressed. Therefore, one of the goals of this review is to aid the electrophoretic researchers to look where they have not.

Recent advances in chiral selectors immobilization and chiral mobile phase additives in liquid chromatographic enantio-separations: A review

For decades now, the separation of chiral enantiomers of drugs has been gaining the interest and attention of researchers. In 1991, the first guidelines for development of chiral drugs were firstly released by the US-FDA. Since then, the development in chromatographic enantioseparation tools has been fast and variable, aiming at creating a suitable environment where the physically and chemically identical enantiomers can be separated. Among those tools, the immobilization of chiral selectors (CS) on different stationary phases and the chiral mobile phase additives (CMPA) which have been progressed and studied extensively. This review article highlights the major advances in immobilization of CS together with their different recognition mechanisms as well as CMPA as a cheaper and successful alternative for chiral stationary phases. Moreover, the role of molecular modeling tool as a pre-step in the choice of CS for evaluating possible interactions with different ligands has been pointed up. Illustrations of reported methods and updates for immobilized CS and CMPA have been included.

The separation of the enantiomers of diquats by capillary electrophoresis using randomly sulfated cyclodextrins as chiral selectors

Diquats, derivatives of the widely used herbicide diquat, represent a new class of functional organic molecules. A combination of their special electrochemical properties and axial chirality could potentially result in their important applications in supramolecular chemistry, chiral catalysis, and chiral analysis. However, prior to their practical applications, the diquats have to be prepared in enantiomerically pure forms and the enantiomeric purity of their P- and M-isomers has to be checked. Hence, a chiral capillary electrophoresis (CE) method has been developed and applied for separation of P- and M-enantiomers of 11 new diquats. Fast and better than baseline CE separations of enantiomers of all 11 diquats within a short time 5-7 min were achieved using acidic buffer, 22 mM NaOH, 35 mM H3 PO4 , pH 2.5, as a background electrolyte, and 6 mM randomly sulfated α-, β-, and γ-cyclodextrins as chiral selectors. The most successful selector was sulfated γ-cyclodextrin, which baseline separated the enantiomers of all 11 diquats, followed by sulfated β-cyclodextrin and sulfated α-cyclodextrin, which baseline separated enantiomers of 10 and nine diquats, respectively. Using this method, a high enantiopurity degree of the isolated P- and M-enantiomers of three diquats with a defined absolute configuration was confirmed and their migration order was identified.

Chitosan-Based Electrochemical Sensors for Pharmaceuticals and Clinical Applications

Chitosan (CTS), a biocompatible and multifunctional material derived from chitin, has caught researchers' attention in electrochemical detection due to its unique properties. This review paper provides a comprehensive overview of the recent progress and applications of CTS-based electrochemical sensors in the analysis of pharmaceutical products and other types of samples, with a particular focus on the detection of medicinal substances. The review covers studies and developments from 2003 to 2023, highlighting the remarkable properties of CTS, such as biocompatibility, chemical versatility, and large surface area, that make it an excellent candidate for sensor modification. Combining CTS with various nanomaterials significantly enhances the detection capabilities of electrochemical sensors. Various types of CTS-based sensors are analyzed, including those utilizing carbon nanomaterials, metallic nanoparticles, conducting polymers, and molecularly imprinted CTS. These sensors exhibit excellent sensitivity, selectivity, and stability, enabling the precise and reliable detection of medications. The manufacturing strategies used for the preparation of CTS-based sensors are described, the underlying detection mechanisms are elucidated, and the integration of CTS sensors with transducer systems is highlighted. The prospects of CTS-based electrochemical sensors are promising, with opportunities for miniaturization, simultaneous detection, and real-time monitoring applications.

Detection and analysis of chiral molecules as disease biomarkers

The chirality of small metabolic molecules is important in controlling physiological processes and indicating the health status of humans. Abnormal enantiomeric ratios of chiral molecules in biofluids and tissues occur in many diseases, including cancers and kidney and brain diseases. Thus, chiral small molecules are promising biomarkers for disease diagnosis, prognosis, adverse drug-effect monitoring, pharmacodynamic studies and personalized medicine. However, it remains difficult to achieve cost-effective and reliable analysis of small chiral molecules in clinical procedures, in part owing to their large variety and low concentration. In this Review, we describe current and emerging techniques that detect and quantify small-molecule enantiomers and their biological importance.

Quality by design-guided development of a capillary electrophoresis method for the chiral purity determination of silodosin

Silodosin is a single isomer selective α₁-adrenoreceptor antagonist used for the treatment of benign prostatic hyperplasia. In order to control the enantiomeric purity of the drug a capillary electrophoresis method was developed that is applicable to the analysis of drug substance as well as pharmaceutical formulations. Method development followed a quality by design strategy. After selection of carboxymethyl-β-cyclodextrin as suitable chiral selector and the starting conditions in the scouting phase, a two-level full factorial design was applied to identify the critical process parameters. The final method optimization was performed using a face-centered central composite design resulting in the conditions 100 mM sodium phosphate buffer, pH 2.9, containing 40 mg/mL car-boxymethyl-β-cyclodextrin, a capillary temperature of 17 °C and an applied voltage of 28 kV. Robustness testing employing a Plackett-Burman design revealed the importance of careful pH adjustment in order to achieve suitable peak shape and resolution. The method was validated according to the guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and applied to the analysis of a commercial capsule formulation.

Metabolomics Analysis of Blood, Urine, and Saliva Samples Based on Capillary Electrophoresis-Mass Spectrometry

Capillary electrophoresis-mass spectrometry (CE-MS) is an ideal method for analyzing various metabolites in biological samples. CE-MS can simultaneously identify and quantify hundreds of charged metabolites using only two acquisition methods for positively and negatively charged metabolites. Furthermore, CE-MS is commonly used for analyzing biological samples to understand the pathology of diseases at the metabolic level and biofluid samples, such as blood and urine, to explore biomarkers. Here, we introduce a protocol that delineates the handling of clinical samples to ensure that the CE-MS analysis yields reproducible quantified data. We have focused on sample collection, storage, processing, and measurement. Although the implementation of rigorous standard operating protocols is preferred for enhancing the quality of the samples, various limitations in an actual clinical setting make it difficult to adhere to strict rules. Therefore, the effect of each process on the quantified metabolites needs to be evaluated to design a protocol with acceptable tolerances. Furthermore, quality controls and assessments to handle clinical samples are introduced.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures’ development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012–2022) on the applicability of CE methods in chiral drug impurity profiling.

Comparison of the Performance of Different Bile Salts in Enantioselective Separation of Palonosetron Stereoisomers by Micellar Electrokinetic Chromatography

Bile salts are a category of natural chiral surfactants which have ever been used as the surfactant and chiral selector for the separation of many chiral compounds by micellar electrokinetic chromatography (MEKC). In our previous works, the application of sodium cholate (SC) in the separation of four stereoisomers of palonosetron (PALO) by MEKC has been studied systematically. In this work, the parameters of other bile salts, including sodium taurocholate (STC), sodium deoxycholate (SDC), and sodium taurodeoxycholate (STDC) in the separation of PALO stereoisomers by MEKC were measured and compared with SC. It was found that all of four bile salts provide chiral recognition for both pairs of enantiomers, as well as achiral selectivity for diastereomers of different degrees. The structure of steroidal ring of bile salts has a greater impact on the separation than the structure of the side chain. The varying separation results by different bile salts were elucidated based on the measured parameters. A model to describe the contributions of the mobility difference of solutes in the aqueous phase and the selectivity of micelles to the chiral and achiral separation of stereoisomers was introduced. Additionally, a new approach to measure the mobility of micelles without enough solubility for hydrophobic markers was proposed, which is necessary for the calculation of separation parameters in MEKC. Under the guidance of derived equations, the separation by SDC and STDC was significantly improved by using lower surfactant concentrations. The complete separation of four stereoisomers was achieved in less than 3.5 min by using 4.0 mM of SDC. In addition, 30.0 mM of STC also provided the complete resolution of four stereoisomers due to the balance of different separation mechanisms. Its applicability for the analysis of a small amount of enantiomeric impurities in the presence of a high concentration of the effective ingredient was validated by a real sample.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Investigation on improvement of enantioseparation in capillary electrophoresis based on maltodextrin by chiral ionic liquids

Taking advantage of chiral ionic liquids, this study deals with the improvement of the enantioseparation performance of a traditional chiral selector (maltodextrin) in capillary electrophoresis. Herein, two polyhydroxy compound-based chiral ionic liquids, namely tetramethylammonium-D-gluconic acid and tetramethylammonium-shikimic acid were designed and utilized as additives for chiral separation for the first time. The synergistic systems provided much better enantioseparations of twelve model drugs compared to the single maltodextrin system. These model analytes contained analgesics, antidepressants, antiallergic drugs, antifungal drugs, antihypertensive drugs, and antiparkinsonian drugs. After optimizing the separation conditions, the chiral recognition mechanism was probed by means of ultraviolet spectroscopy, nuclear magnetic resonance, and molecular modeling. The results of spectroscopic and computational analyses were in good consistency with enantioseparation outcomes. Finally, the proposed method was successfully used for the determination of the enantiomeric purity of duloxetine hydrochloride.

Open Tubular Capillary Electrochromatography-Mass Spectrometry for Analysis of Underivatized Amino Acid Enantiomers with a Porous Layer-Gold Nanoparticle-Modified Chiral Column

By developing a novel chiral column, we integrate open tubular capillary electrochromatography into sheathless mass spectrometry (MS) for efficient analysis of underivatized amino acid enantiomers. The chiral column is easily fabricated by modifying the inner surface of a capillary with a three-dimensional porous layer (PL, thickness ∼ 90 nm, pore size ∼ 30 nm) and gold nanoparticles and by introducing a chiral selector, thiol β-cyclodextrin (SH-β-CD), onto the modified surface via Au-S bonds. This approach greatly enhances the specific surface area and thus the ratio of the stationary phase to mobile phase and interaction between the stationary phase and analytes. The proposed PLOT@Au@CD column is coupled to the sheathless CE-ESI-MS system for chiral analysis of amino acid enantiomers. No derivatization of amino acids is required for chiral analysis, and baseline separation of a total of 15 pairs of amino acid enantiomers is achieved within 17 min with high column efficiencies of 5.60 × 10⁴ to 1.82 × 10⁶ N/m, high resolutions of 1.51-10.0, and low limits of detection between 0.02 and 0.09 μg/mL. The separation efficiency and MS intensity are only slightly decreased over 60 runs or after usage for 15 days, showing excellent repeatability and stability of the PLOT@Au@CD column. The proposed method is successfully applied to the determination of amino acid enantiomers in vinegar samples with satisfactory accuracy. Our study provides a new approach for developing a chiral stationary phase in the chromatographic separation technique, which can be easily coupled to sensitive MS detection, thus it would be of value for various applications in the fields of chiral analysis.

Applications of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical and food analysis (2019-2021)

So far, the potential of capillary electrophoresis (CE) in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption and low cost. This review examines the implementations and advancements of CE in different application fields (environmental, pharmaceutical, clinical and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used UV-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review is focused on the development of CE in the fields of environmental, pharmaceutical, clinical and food analysis, the new sample pretreatment techniques of microextraction and enrichment which fit excellently to CE in recent three years are also described briefly. This article is protected by copyright. All rights reserved.

Synthetic Cathinones: Recent Developments, Enantioselectivity Studies and Enantioseparation Methods

New psychoactive substances represent a public health threat since they are not controlled by international conventions, are easily accessible online and are sold as a legal alternative to illicit drugs. Among them, synthetic cathinones are widely abused due to their stimulant and hallucinogenic effects. To circumvent the law, new derivatives are clandestinely synthesized and, therefore, synthetic cathinones keep emerging on the drug market, with their chemical and toxicological properties still unknown. In this review, a literature assessment about synthetic cathinones is presented focusing on the recent developments, which include more than 50 derivatives since 2014. A summary of their toxicokinetic and toxicodynamic properties are also presented. Furthermore, synthetic cathinones are chiral compounds, meaning that they can exist as two enantiomeric forms which may present different biological and toxicological activities. To analyze the enantiomers, the development of enantiomeric resolution methods for synthetic cathinones is crucial. Many methods have been reported over the years that include mostly chromatographic and electromigration techniques, with liquid chromatography using chiral stationary phases being the technique of choice. This review intended to present an overview of enantioselectivity studies and enantioseparation analysis regarding synthetic cathinones, highlighting the relevance of chirality and current trends.

Determination of the pharmaceuticals-nano/microplastics in aquatic systems by analytical and instrumental methods

Pharmaceutical residues and nanoplastic and microplastic particles as emerging pollutants in the aquatic environment are a subject of increasing concern in terms of the effect on water sources and marine organisms. There is lack of information about pharmaceutical-nanoplastic and pharmaceutical-microplastic mixtures. The present study aimed to investigate the fate and effect of pharmaceutical residues and nanoplastic and microplastic particles, the results of combinations of pharmaceutical residues with nanoplastic and microplastic particles, and toxic effects of pharmaceutical residues and nanoplastic and microplastic particles. Moreover, the objective was also to introduce analytical methods for pharmaceuticals, along with instrumental techniques for nanoplastic and microplastic particles in aquatic environments and organisms. PhAC alone can affect marine environments and aquatic organisms. When pharmaceutical residues combine with nanoplastic and microplastic particles, the rate of toxicity increases, and the result of this phenomenon constitutes this kind of pollutant in wastewater. Hence, the rate of mortality in organisms enhances. This study aimed to investigate the effect of pharmaceuticals residues and nanoplastic and microplastic particles, and a mixture of pharmaceutical residues and nanoplastic and microplastic particles in aquatic biota. Another object was survey methods for recognizing pharmaceutical residues and nanoplastic and microplastic particles. The findings show that pharmaceutical residues in organisms caused cell structure damage, inflammatory response, and nerve cell apoptosis. This study aimed to investigate the effect of microplastic particles in the human food chain and their impact on human health. Moreover, this review aims to present an innovative methodology based on comprehensive analytical techniques used to determine and identify pharmaceuticals adsorbed on nano- and microplastics in aquatic ecosystems. Finally, this review addresses the knowledge gaps and provides insights into future research strategies to better understand their interactions.

Structural characterization of methyl-β-cyclodextrins by high-performance liquid chromatography and nuclear magnetic resonance spectroscopy and effect of their isomeric composition on the capillary electrophoresis enantioseparation of daclatasvir

The separation of daclatasvir and its R,R,R,R-enantiomer was studied by capillary electrophoresis using various randomly methylated β-CDs and the single isomer heptakis(2,6-di-O-methyl)-β-CD (2,6-DM-β-CD) as chiral selectors in an acidic background electrolyte. Opposite enantiomer migration order was observed for randomly substituted CDs compared to 2,6-DM-β-CD as well as methylated β-CDs with different composition according to the specifications of the manufacturers. HPLC and NMR analyses confirmed that the presence of a high 2,6-DM-β-CD content in the CDs enables to achieve the migration order R,R,R,R-enantiomer > daclatasvir. In contrast, products with low 2,6-DM-β-CD isomer content and/or the presence of a large amount of methylated CD isomers, in which d-glucopyranose moieties are not substituted in either position 2 or 6, displayed the opposite enantiomer migration order daclatasvir > R,R,R,R-enantiomer. The study indicated the importance of the type and composition of derivatized CDs on chiral separations in capillary electrophoresis as well as the importance of proper quality control for cyclodextrin manufacturers. Moreover, the observed migration order could be rationalized based on the composition and substitution pattern of the CDs.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

A new strategy for quality evaluation and control of Chinese patent medicine based on chiral isomer ratio analysis: With Yuanhuzhitong tablet as an example

Chiral compounds commonly exist in traditional Chinese medicine (TCM), but little research on the quality control of TCM has been conducted. In this study, a new strategy is proposed, taking Yuanhuzhitong tablet [YHZT, consisting of Radix Angelicae Dahuricae and Rhizoma Corydalis (Yan Hu Suo, YHS)] for example, which is based on chiral isomer ratio analysis to monitor the production process of Chinese patent medicine companies. In the process of content determination for tetrahydropalmatine (THP) in YHZT from different companies, noticeable differences were observed in their chromatographic behaviors. It is known that THP has two enantiomers, naturally coexisting in YHS as a racemic mixture, so we prepared THP twice and subsequently performed chiral separation analysis using supercritical fluid chromatography. As a result, the peak area ratios of two enantiomers from different companies varied remarkably, demonstrating that some companies did not probably manufacture YHZT products in accordance with the prescription proportion, used inferior or extracted YSH crude materials in the production process, and added raw chemical medicine in the production to reach the standard and lower the costs. In conclusion, the peak area ratio of chiral isomers could be taken as a key quality index.

Capillary Electrophoresis Instruments for Medical Applications and Falsified Drug Analysis/Quality Control in Developing Countries

The implementation of integrated analytical techniques to meet stringent requirements in the life sciences requires a well-developed analytical capacity. New technology in analytical equipment for the analysis of large and small molecules is continuously being developed. However, developing countries frequently struggle to keep pace with technological advancements. Hence, it is of utmost importance to better invest in optimizing existing and proven methodologies to tackle life-saving challenges in developing countries. In this regard, capillary electrophoresis is a promising candidate for solving multiple analytical problems compared to its chromatographic and spectroscopic counterparts due to its fast analytical response time and notable cost efficiency. In the following, we summarize various issues and opportunities for capillary electrophoresis to be the technique of choice for the unresolved bottlenecks in analytical equipment in developing countries for drug quality control. This perspective demonstrates that the ongoing quest for the design of new, impactful analytical techniques is a dynamic and rapidly developing research area and mentions some directions and opportunities that have arisen during the recent pandemic.

Native and substituted cyclodextrins as chiral selectors for capillary electrophoresis enantioseparations: Structures, features, application, and molecular modeling

CDs are cyclic oligosaccharides consisting of α-d-glucopyranosyl units linked through 1,4-linkages, which are obtained from enzymatic degradation of starch. The coexistence of hydrophilic and hydrophobic regions in the same structure makes these macrocycles extremely versatile as complexing host with application in food, cosmetics, environmental, agriculture, textile, pharmaceutical, and chemical industries. Due to their inherent chirality, CDs have been also successfully used as chiral selectors in enantioseparation science, in particular, for CE enantioseparations. In the last decades, multidisciplinary approaches based on CE, NMR spectroscopy, X-ray crystallography, microcalorimetry, and molecular modeling have shed light on some aspects of recognition mechanisms underlying enantiodiscrimination. With the ever growing improvement of computer facilities, hardware and software, computational techniques have become a useful tool to model at molecular level the dynamics of diastereomeric associate formation to sample low-energy conformations, the binding energies between the enantiomer and the CD, and to profile noncovalent interactions contributing to the stability of CD/enantiomer association. On this basis, the aim of this review is to provide the reader with a critical overview on the applications of CDs in CE. In particular, the contemporary theory of the electrophoretic technique and the main structural features of CDs are described, with a specific focus on techniques, methods, and approaches to model CE enantioseparations promoted by native and substituted CDs. A systematic compilation of all published literature has not been attempted.

The Use of Dual Cyclodextrin Chiral Selector Systems in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: An Overview

Cyclodextrin (CD) derivatives are the most efficient and frequently used chiral selectors (CSs) in capillary electrophoresis (CE). There are situations when the use of a single CD as CS is not enough to obtain efficient chiral discrimination of the enantiomers; in these cases, sometimes this problem can be resolved using a dual CD system. The use of dual CD systems can often dramatically enhance enantioseparation selectivity and can be applied for the separation of many analytes of pharmaceutical interest for which enantioseparation by CE with another CS systems can be problematic. Usually in a dual CD system an anionic CD is used together with a neutral one, but there are situations when the use of a cationic CD with a neutral one or the use of two neutral CDs or even two ionized CDs can be an efficient solution. In the current review we present general aspects of the use of dual CD systems in the analysis of pharmaceutical substances. Several examples of applications of the use of dual CD systems in the analysis of pharmaceuticals are selected and discussed. Theoretical aspects regarding the separation of enantiomers through simultaneous interaction with the two CSs are also explained. Finally, advantages, disadvantages, potential and new direction in this chiral analysis field are highlighted.

Separation of tetrahydrozoline enantiomers in capillary electrophoresis with cyclodextrin-type chiral selectors and investigation of chiral recognition mechanisms

The recognition power and affinity pattern of various cyclodextrins (CD) towards the enantiomers of tetrahydrozoline (THZ) were studied using capillary electrophoresis (CE). As expected, affinity of THZ enantiomers and selectivity of recognition towards CD derivatives was strongly dependent on the cavity size and substituent type and pattern on the CD rims. Not only were the affinity strength and selectivity of recognition affected by the size of the cavity and chemistry of the CDs but also the affinity pattern. Another interesting example of opposite affinity pattern of enantiomers towards α- and β-CD was observed here. In addition, opposite affinity pattern of THZ enantiomers was seen towards β-CD and its acetylated derivatives, while methylation of β-CD did not affect the affinity pattern of THZ enantiomers. In order to get more information about structural mechanisms of the multivariate dependences mentioned above, rotating frame Overhauser enhancement spectroscopy (ROESY) and computation techniques were used. Significant differences between the structure of THZ complexes with different CDs with both methods were encountered. Good correlations between experimentally determined and computed structure of complexes, as well as between computed complex stabilities and enantiomer migration order (EMO) in CE were observed.