Sowing kernels for food safety: Importance of rapid on‐site detction of pesticide residues in agricultural foods

Development of MOF-derived Co3O4 microspheres composed of fiber stacks for simultaneous electrochemical detection of Pb2+ and Cu2

As an ideal transition metal oxide, Co3O4 is a P-type semiconductor with excellent electrical conductivity, non-toxicity and low cost. This work reports the successful construction of Co3O4 materials derived from metal-organic frameworks (MOFs) using a surfactant micelle template-solvothermal method. The modified electrodes are investigated for their ability to electrochemically detect Pb2+ and Cu2+ in aqueous environments. By adjusting the mass ratios of alkaline modifiers, the morphological microstructures of Co3O4-X exhibit a transition from distinctive microspheres composed of fiber stacks to rods. The results indicate that Co3O4-1(NH4F/CO(NH2)2 = 1:0) has a distinctive microsphere structure composed of stacked fibers, unlike the other two materials. Co3O4-1/GCE is used as the active material of the modified electrode, it shows the largest peak response currents to Pb2+ and Cu2+, and efficiently detects Pb2+ and Cu2+ in the aqueous environment individually and simultaneously. The linear response range of Co3O4-1/GCE for the simultaneous detection of Pb2+ and Cu2+ is 0.5-1.5 μM, with the limits of detection (LOD, S/N = 3) are 9.77 nM and 14.97 nM, respectively. The material exhibits a favorable electrochemical response, via a distinctive Co3O4-1 microsphere structure composed of stacked fibers. This structure enhances the number of active adsorption sites on the material, thereby facilitating the adsorption of heavy metal ions (HMIs). The presence of oxygen vacancies (OV) can also facilitate the adsorption of ions. The Co3O4-1/GCE electrode also exhibits excellent anti-interference ability, stability, and repeatability. This is of great practical significance for detecting Pb2+ and Cu2+ in real water samples and provides a new approach for developing high-performance metal oxide electrochemical sensors derived from MOFs.

A fluorescence ionic probe utilizing Cu2+ assisted competition for detecting glyphosate abused in green tea

Food fraud caused by the violation of glyphosate use in tea is frequently exposed, posing a potential health risk to consumers and undermining trust in food safety. In the work, an ionic fluorescent probe "[P66614] [4HQCA]-Cu2+ (PHQCA-Cu2+)" was constructed using Cu2+ and ionic liquids coordination through a competitive coordination strategy to detect glyphosate. This probe exhibited a prominent "turn-on" fluorescence response in glyphosate detection. PHQCA-Cu2+was destroyed by glyphosate with its strong coordination capability, and a new complex re-formed simultaneously between glyphosate and the Cu2+ in it, where Cu2+ served as an "invisible indicator" influencing fluorescence changes. Remarkably, PHQCA-Cu2+formed rapidly within 5 s, demonstrated exceptional sensitivity and selectivity, and satisfactory detection performance on paper strips impregnated withPHQCA-Cu2+.Importantly,PHQCA-Cu2+showed excellent recoveries in various green tea, which offered a viable method for identifying contaminated products from the supply chain quickly to enhance overall food safety surveillance.

Convergent technologies to tackle challenges of modern food authentication

The authentication process involves all the supply chain stakeholders, and it is also adopted to verify food quality and safety. Food authentication tools are an essential part of traceability systems as they provide information on the credibility of origin, species/variety identity, geographical provenance, production entity. Moreover, these systems are useful to evaluate the effect of transformation processes, conservation strategies and the reliability of packaging and distribution flows on food quality and safety. In this manuscript, we identified the innovative characteristics of food authentication systems to respond to market challenges, such as the simplification, the high sensitivity, and the non-destructive ability during authentication procedures. We also discussed the potential of the current identification systems based on molecular markers (chemical, biochemical, genetic) and the effectiveness of new technologies with reference to the miniaturized systems offered by nanotechnologies, and computer vision systems linked to artificial intelligence processes. This overview emphasizes the importance of convergent technologies in food authentication, to support molecular markers with the technological innovation offered by emerging technologies derived from biotechnologies and informatics. The potential of these strategies was evaluated on real examples of high-value food products. Technological innovation can therefore strengthen the system of molecular markers to meet the current market needs; however, food production processes are in profound evolution. The food 3D-printing and the introduction of new raw materials open new challenges for food authentication and this will require both an update of the current regulatory framework, as well as the development and adoption of new analytical systems.

Investigating the adsorption potential of char derived from waste latex for methylene blue removal

This study presents the adsorption of methylene blue (MB) dye using latex char derived from pyrolysis of latex gloves. The adsorption process was investigated systematically using Response Surface Methodology (RSM) with a Central Composite Design (CCD). The effects of four key variables, namely pH, time, temperature, and adsorbent dosage, were studied using a factorial design enriched with center points and axial points. Experimental data were analyzed using a second-order polynomial regression model to construct a response surface model, which elucidated the relationship between the variables and MB removal efficiency. The study found that the char obtained at 800 °C exhibited the highest adsorption capacity due to its increased carbonization, expanded surface area, and diverse pore structure. Analysis of Variance (ANOVA) confirmed the significance of the quadratic model, with remarkable agreement between predicted and experimental outcomes. Diagnostic plots validated the model's reliability, while 3D contour graphs illustrated the combined effects of variables on MB removal efficiency. Optimization using DoE software identified optimal conditions resulting in a 99% removal efficiency, which closely matched experimental results. Additionally, adsorption isotherms revealed that the Freundlich model best described the adsorption behavior, indicating heterogeneous surface adsorption with multilayer adsorption. This comprehensive study provides valuable insights into the adsorption process of MB dye using latex char, with implications for wastewater treatment and environmental remediation.

Smartphone-assisted carbon dots fluorescent sensing platform for visual detection of Thiophanate-methyl in fruits and vegetables

Trimesic acid and o-phenylenediamine (OPD) were employed as precursors to synthesize yellow-green fluorescent carbon dots (Y-G-CDs) by solvothermal synthesis for the sensitive detection of Thiophanate-methyl (TM) in real agricultural products. The Y-G-CDs probe could specifically recognize the TM primarily through π-π stacking. Moreover, the fluorescence quenching of the probe was ultimately dominated by the PET effect, based on the interaction between the abundant carboxyl groups on the surface of the Y-G-CDs and the amino group of TM. A strong linear relationship between the fluorescence quenching of the probe and TM concentration in the range of 0-10 µmol/L was observed and the limit of detection (LOD) was calculated to be 50.7 nmol/L. Compared to the interference pesticides, the Y-G-CDs probe demonstrated exceptional selectivity toward TM, with satisfactory recoveries of 96.3 % - 104.2 % in spiked food samples. The Y-G-CDs probe enables simple pretreatment, cost-effective, and on-site detection of TM in fruits and vegetables with visual detection of the TM employing a smartphone-assisted sensing platform.

Dialdehyde starch-enclosed silver nanoparticles substrate with controlled-release "hotspots" for ultrasensitive SERS detection of thiabendazole

Pesticide residues have long been a major concern for food safety. In this study, a dialdehyde starch-encapsulated silver nanoparticles composite with controlled-release "hotspots" was developed as a surface-enhanced Raman scattering (SERS) substrate. At room temperature, most of the Ag NPs were encapsulated in dialdehyde starch, which is beneficial for improving stability, and when heated to the gelatinization point, Ag NPs are completely released and abundant hot spots are formed. We demonstrated sensitive detection of thiabendazole (TBZ) in or on the surface of an apple by means of two ways, i.e., detecting the analyte in solution after pretreatment and in-situ detecting the analyte by using a flexible paper-based substrate. The results showed that the detection limits of TBZ by the two ways were 0.052 ppm and 0.051 ppm respectively, and the recoveries of TBZ range from 96.80 % to 105.46 %. Overall, this SERS substrate shows great potential for pesticide residue detection in food.

Benzo(k)fluoranthene and benzo(b)fluoranthene degradation by Selenastrum capricornutum and identification of metabolites using HPLC-FD and HPLC-ESI-QqQ-MS/MS

Selenastrum capricornutum efficiently degrades high molecular weight polycyclic aromatic hydrocarbons (HMW PAHs). Until now, there are few studies on the benzo(k)fluoranthene (BkF) and benzo(b)fluoranthene (BbF) biodegradation by this microalga. For this reason, in the present work, extracts obtained from cultures of S. capricornutum were incubated with BkF and BbF individually, and analyzed by HPLC with fluorescence and different mass spectrometry detection modes: i) the HPLC-ESI(+)-MS/MS (MRM mode) analysis that confirmed the formation of monohydroxylated and dihydrodiol metabolites indicating that these PAHs could be simultaneously degraded through the monooxygenase and dioxygenase; ii) HPLC-ESI(+)-MS (full scan mode) that showed the formation of key metabolites containing four and two aromatic rings possibly resulting from aromatic ring-opening oxygenases, not known until now in microalgae; iii) HPLC-FD analysis that confirmed the individual BkF and BbF degradation occurring in extra- and intra-cellular extracts, indicating that an oxygenase enzyme complex is released by microalgae cells to the external environment to perform HMW PAHs biodegradation. So, this work presents new insights into the metabolic pathways of BkF and BbF biodegradation by S. capricornutum; likewise, the intra- and extra-cellular extracts of this microalgae have great potential to be applied in environmental procedures.

A versatile CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay for highly sensitive, on-site and dual-readout detection of Aflatoxin B1

Mycotoxin contaminations in food and environment seriously harms human health. Constructing sensitive and point-of-test early-warning tools for mycotoxin determination is in high demand. In this study, a CuCo@PDA nanozyme-based aptamer-mediated lateral flow assay (Apt-LFA) has been elaborately designed for on-site and sensitive determination of mycotoxin Aflatoxin B1 (AFB1). Benefiting from the rich functional groups and excellent peroxidase-like activity, the CuCo@PDA with original dark color can be conjugated with the specific recognition probe (i.e., aptamer), generating colorimetric signal on the test lines of Apt-LFA via a competitive sensing strategy. The signal can further be amplified in-situ by catalytic chromogenic reaction. Therefore, a visual and dual-readout detection of AFB1 has been realized. The developed Apt-LFA provides a flexible detection mode for qualitative and quantitative analysis of AFB1 by naked-eyes observation or smartphone readout. The smartphone-based LFA platform shows a reliable and ultrasensitive determination of AFB1 with the limit of detection (LOD) of 2.2 pg/mL. The recoveries in the real samples are in the range of 95.11-113.77% with coefficients of variations less than 9.84%. This study provides a new approach to realize point-of-test and sensitive detection of mycotoxins in food and environment using nanozyme-based Apt-LFAs.

A portable colorimetric sensing platform for rapid and sensitive quantification of dichlorvos pesticide based on Fe-Mn bimetallic oxide nanozyme-participated highly efficient chromogenic catalysis

BACKGROUND

Dichlorvos (DDVP), as a highly effective insecticide, is widely used in agricultural production. However, DDVP residue in foodstuffs adversely affects human health. Conventional instrumental analysis can provide highly sensitive and accurate detection of DDVP, while the need of bulky and expensive equipment limits their application in resource-poor areas and on-site detection. Therefore, the development of easily portable sensing platforms for convenient, rapid and sensitive quantification of DDVP is very essential for ensuring food safety.

RESULT

A portable colorimetric sensing platform for rapid and sensitive quantification of DDVP is developed based on nanozyme-participated highly efficient chromogenic catalysis. The Fe-Mn bimetallic oxide (FeMnOx) nanozyme possesses excellently oxidase-like activity and can efficiently catalyze oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) into a blue oxide with a very low Michaelis constant (Km) of 0.0522 mM. The nanozyme-catalyzed chromogenic reaction can be mediated by DDVP via inhibiting the acetylcholinesterase (AChE) activity. Thus, trace DDVP concentration-dependent color evolution is achieved and DDVP can be sensitively detected by spectrophotometry. Furthermore, a smartphone-integrated 3D-printed miniature lightbox is fabricated as the colorimetric signal acquisition and processing device. Based on the FeMnOx nanozyme and smartphone-integrated lightbox system, the portable colorimetric sensing platform of DDVP is obtained and it has a wide linear range from 1 to 3000 ng mL-1 with a low limit of detection (LOD) of 0.267 ng mL-1 for DDVP quantification.

SIGNIFICANCE

This represents a new portable colorimetric sensing platform that can perform detection of DDVP in foodstuffs with simplicity, sensitivity, and low cost. The work not only offers an alternative to rapid and sensitive detection of DDVP, but also provides a new insight for the development of advanced sensors by the combination of nanozyme, 3D-printing and information technologies.

A temperature-independent model of dual calibration standards for onsite and point-of-care quantification analyses via electrophoresis titration chip

Electrophoresis titration chip (ETC) is a versatile tool for onsite and point-of-care quantification analyses because it affords naked-eye detection and a straightforward quantification format. However, it is vulnerable to changes in environmental temperature, which regulates the electrophoretic migration by affecting the ion mobility and the target recognition by influencing the enzyme activity. Therefore, the quantification accuracy of the ETC tests was severely compromised. Rather than using the dry bath or heating/cooling units, we proposed a facile model of dual calibration standards (DCS) to mathematically eliminate the effects of temperature on quantification accuracy. To verify our model, we deployed the ETC device at different temperatures ranging from 5 to 40 °C. We further utilized the DCS-ETC to determine the protein content and uric acid concentration in real samples outside the laboratory. All the experimental results showed that our model significantly stabilized the quantification recovery from 35.31-153.44 % to 99.38-103.44 % for protein titration; the recovery of uric acid titration is also stable at 96.25-106.42 %, suggesting the enhanced robustness of the ETC tests. Therefore, DCS-ETC is a field-deployable test that can offer reliable quantification performance without extra equipment for temperature control. We envision that it is promising to be used for onsite applications, including food safety control and disease diagnostics.

Panorama of biogenic nano-fertilizers: A road to sustainable agriculture

The ever-increasing demand for food from the growing population has augmented the consumption of fertilizers in global agricultural practices. However, the excessive usage of chemical fertilizers with poor efficacy is drastically deteriorating ecosystem health through the degradation of soil fertility by diminishing soil microflora, environment contamination, and human health by inducing chemical remnants to the food chain. These challenges have been addressed by the integration of nanotechnological and biotechnological approaches resulting in nano-enabled biogenic fertilizers (NBF), which have revolutionized agriculture sector and food production. This review critically details the state-of-the-art NBF production, types, and mechanism involved in cultivating crop productivity/quality with insights into genetic, physiological, morphological, microbiological, and physiochemical attributes. Besides, it explores the associated challenges and future routes to promote the adoption of NBF for intelligent and sustainable agriculture. Furthermore, diverse applications of nanotechnology in precision agriculture including plant biosensors and its impact on agribusiness and environmental management are discussed.

Tenofovir antiviral drug solubility enhancement with β-cyclodextrin inclusion complex and in silico study of potential inhibitor against SARS-CoV-2 main protease (Mpro)

Tenofovir (TFR) is an antiviral drug commonly used to fight against viral diseases infection due to its good potency and high genetic barrier to drug resistance. In physiological conditions, TFR is less water soluble, more unstable, and less permeable, limiting its effective therapeutic applications. In addition to their use in treating the Coronavirus disease 2019 (COVID-19), cyclodextrins (CDs) are also being used as a molecule to develop therapies for other diseases due to its enhance solubility and stability. This study is designed to synthesize and characterization of β-CD:TFR inclusion complex and its interaction against SARS-CoV-2 (M^Pro) protein (PDB ID;7cam). Several techniques were used to characterize the prepared β-CD:TFR inclusion complex, including UV-Visible, FT-IR, XRD, SEM, TGA, and DSC, which provided appropriate evidence to confirm the formation. A 1:1 stoichiometry was determined for β-CD:TFR inclusion complex in aqueous medium from UV-Visible absorption spectra by using the Benesi-Hildebrand method. Phase solubility studies proposed that β-CD enhanced the excellent solubility of TFR and the stability constant was obtained at 863 ± 32 M^-1. Moreover, the molecular docking confirmed the experimental results demonstrated the most desirable mode of TFR encapsulated into the β-CD nanocavity via hydrophobic interactions and possible hydrogen bonds. Moreover, TFR was validated in the β-CD:TFR inclusion complex as potential inhibitors against SARS-CoV-2 main protease (M^pro) receptors by using in silico methods. The enhanced solubility, stability, and antiviral activity against SARS-CoV-2 (M^Pro) suggest that β-CD:TFR inclusion complexes can be further used as feasible water-insoluble antiviral drug carriers in viral disease infection.

A Short Review on Miniaturized Biosensors for the Detection of Nucleic Acid Biomarkers

Even today, most biomarker testing is executed in centralized, dedicated laboratories using bulky instruments, automated analyzers, and increased analysis time and expenses. The development of miniaturized, faster, low-cost microdevices is immensely anticipated for substituting for these conventional laboratory-oriented assays and transferring diagnostic results directly onto the patient's smartphone using a cloud server. Pioneering biosensor-based approaches might make it possible to test biomarkers with reliability in a decentralized setting, but there are still a number of issues and restrictions that must be resolved before the development and use of several biosensors for the proper understanding of the measured biomarkers of numerous bioanalytes such as DNA, RNA, urine, and blood. One of the most promising processes to address some of the issues relating to the growing demand for susceptible, quick, and affordable analysis techniques in medical diagnostics is the creation of biosensors. This article critically discusses a short review of biosensors used for detecting nucleic acid biomarkers, and their use in biomedical prognostics will be addressed while considering several essential characteristics.

Two dimensional (2D) materials and biomaterials for water desalination; structure, properties, and recent advances

BACKGROUND

An efficient solution to the global freshwater dilemma is desalination. MXene, Molybdenum Disulfide (MoS₂), Graphene Oxide, Hexagonal Boron Nitride, and Phosphorene are just a few examples of two-dimensional (2D) materials that have shown considerable promise in the development of 2D materials for water desalination. However, other promising materials for desalinating water are biomaterials. The benefits of bio-materials are their wide distribution, lack of toxicity, and superior capacity for water desalination.

METHODS

For the rational use of water and the advancement of sustainable development, it is of the utmost importance to research 2D-dimensional materials and biomaterials that are effective for water desalination. The scientific community has concentrated on wastewater remediation using bio-derived materials, such as nanocellulose, chitosan, bio-char, bark, and activated charcoal generated from plant sources, among the various endeavors to enhance access to clean water. Moreover, the 2D-materials and biomaterials may have ushered in a new age in the production of desalination materials and created a promising future.

RESULTS

The present review article focuses on and reviews the progress of 2D materials and biomaterials for water desalination. Their properties, surface, and structure, combined with water desalination applications, are highlighted. Further, the practicability and potential future directions of 2D materials and biomaterials are proposed. Thus, the current work provides information and discernments for developing novel 2D materials and biomaterials for wastewater desalination. Moreover, it aims to promote the contribution and advancement of materials for water desalination, fabrication, and industrial production.

Enzyme Inhibition-Based Assay to Estimate the Contribution of Formulants to the Effect of Commercial Pesticide Formulations

Pesticides can affect the health of individual organisms and the function of the entire ecosystem. Therefore, thorough assessment of the risks associated with the use of pesticides is a high-priority task. An enzyme inhibition-based assay is used in this study as a convenient and quick tool to study the effects of pesticides at the molecular level. The contribution of formulants to toxicological properties of the pesticide formulations has been studied by analyzing effects of 7 active ingredients of pesticides (AIas) and 10 commercial formulations based on them (AIfs) on the function of a wide range of enzyme assay systems differing in complexity (single-, coupled, and three-enzyme assay systems). Results have been compared with the effects of AIas and AIfs on bioluminescence of the luminous bacterium Photobacterium phosphoreum. Mostly, AIfs produce a considerably stronger inhibitory effect on the activity of enzyme assay systems and bioluminescence of the luminous bacterium than AIas, which confirms the contribution of formulants to toxicological properties of the pesticide formulation. Results of the current study demonstrate that "inert" ingredients are not ecotoxicologically safe and can considerably augment the inhibitory effect of pesticide formulations; therefore, their use should be controlled more strictly. Circular dichroism and fluorescence spectra of the enzymes used for assays do not show any changes in the protein structure in the presence of commercial pesticide formulations during the assay procedure. This finding suggests that pesticides produce the inhibitory effect on enzymes through other mechanisms.

MXene-based aptasensor for the detection of aflatoxin in food and agricultural products

The detection of toxins that contaminate food needs highly sensitive and selective techniques to prevent substantial monitory loss. In this regard, various nanostructured material-enabled biosensors, have recently been developed to improve the detection of food toxins among them aflatoxin is the prevalent one. The biosensor-based detection of aflatoxin is quick, cheaper, and needs less skilled personnel, therefore overcoming the shortcomings of conventional techniques such as LC/MS-MS, HPLC, and ELISA assays. 2D MXenes manifest as an efficient material for biosensing due to their desirable biocompatibility, magnificent mechanical strength, easiness of surface functionalization, and tuneable optical and electronic features. Contrary to this, aptamers as biorecognition elements (BREs) possess high selectivity, sensitivity, and ease of synthesis when compared to conventional BREs. In this review, we explored the most cutting-edge aptamer-based MXene-enabled biosensing technologies for the detection of the most poisonous mycotoxins (i.e., Aflatoxins) in food and environmental matrices. The discussion begins with the synthesis processes and surface functionalization/modification of MXenes. Computational approaches for designing aptasensors and advanced data analysis based on artificial intelligence and machine learning with special emphasis over Internet-of-Thing integrated biosensing devices has been presented. Besides, the advantages of aptasensors over conventional methods along with their limitations have been briefed. Their benefits, drawbacks, and future potential are discussed concerning their analytical performance, utility, and on-site adaptability. Additionally, next-generation MXene-enabled biosensing technologies that provide end users with simple handling and improved sensitivity and selectivity have been emphasized. Owing to massive applicability, economic/commercial potential of MXene in current and future perspective have been highlighted. Finally, the existing difficulties are scrutinized and a roadmap for developing sophisticated biosensing technologies to detect toxins in various samples in the future is projected.

Recent Advancements in Nanobiosensors: Current Trends, Challenges, Applications, and Future Scope

In recent years, there has been immense advancement in the development of nanobiosensors as these are a fundamental need of the hour that act as a potential candidate integrated with point-of-care-testing for several applications, such as healthcare, the environment, energy harvesting, electronics, and the food industry. Nanomaterials have an important part in efficiently sensing bioreceptors such as cells, enzymes, and antibodies to develop biosensors with high selectivity, peculiarity, and sensibility. It is virtually impossible in science and technology to perform any application without nanomaterials. Nanomaterials are distinguished from fine particles used for numerous applications as a result of being unique in properties such as electrical, thermal, chemical, optical, mechanical, and physical. The combination of nanostructured materials and biosensors is generally known as nanobiosensor technology. These miniaturized nanobiosensors are revolutionizing the healthcare domain for sensing, monitoring, and diagnosing pathogens, viruses, and bacteria. However, the conventional approach is time-consuming, expensive, laborious, and requires sophisticated instruments with skilled operators. Further, automating and integrating is quite a challenging process. Thus, there is a considerable demand for the development of nanobiosensors that can be used along with the POCT module for testing real samples. Additionally, with the advent of nano/biotechnology and the impact on designing portable ultrasensitive devices, it can be stated that it is probably one of the most capable ways of overcoming the aforementioned problems concerning the cumulative requirement for the development of a rapid, economical, and highly sensible device for analyzing applications within biomedical diagnostics, energy harvesting, the environment, food and water, agriculture, and the pharmaceutical industry.