Marine and freshwater microplastic research in South Africa

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Abundance and distribution of microplastics in benthic sediments and Cladocera taxa in a subtropical Austral reservoir

Pollution of the natural environment by microplastics has become a global issue in ecosystems as it poses a potential long-term threat to biota. Microplastics can accrue in high abundances in sediments of aquatic ecosystems while also contaminating pelagic filter feeders, which could transfer pollutants up trophic webs. We assess the abundance and distribution of microplastics in benthic sediments and Cladocera taxa in a subtropical Austral reservoir using a combination of geospatial techniques, physicochemical analyses, diversity indices, and multivariate statistics between two seasons (i.e., hot-wet and cool-dry). We found particularly high densities of microplastics during the cool-dry season for both sediments (mean 224.1 vs. 189 particles kg-1 dry weight) and Cladocera taxa (0.3 particles per individual). Cladocera microplastic shapes were dominated by fibers with high densities of the transparent color scheme. Pearson correlation results indicated that sediment microplastic abundances were negatively correlated with chlorophyll-a concentration, temperature, and resistivity, whereas they were positively correlated with pH and salinity during the hot-wet season, with no variables significant in the cool-dry season. Cladocera microplastic abundances were positively correlated with conductivity and salinity during the cool-dry season, but no variables in the hot-wet season. These findings provide insights into the role of reservoirs as microplastic retention sites and the potential for uptake and transfer from lower trophic groups. These insights can be used to strengthen future monitoring and intervention strategies. Integr Environ Assess Manag 2024;1-15. © 2024 SETAC.

Microplastic concentrations and risk assessment in water, sediment and invertebrates from Simon's Town, South Africa

Plastic pollution is an ever-increasing threat globally and poor waste management in South Africa has caused an increase in plastic leakage into the environment. Plastic waste in the environment are categorized according to size and plastic particles smaller than 5 mm in size are regarded as microplastics (MPs), and little to no research has been done on MPs pollution within the marine coastal environment and rocky shores in South Africa. Sampling was done in February 2020 at a rocky shore within Simon's Town Marina, Cape Town. MPs were extracted from collected water (n = 5), sediment (n = 5) and biota (n ≤ 30) samples. The extracted MPs were further classified based on shape, colour, size and an attenuated total reflectance Fourier-transform infrared (ATR-FTIR) instrument was utilized for polymer type identification The risks posed by MPs because of concentration at which they occurred and chemical composition were assessed in all the sample types. As expected, MPs were higher in sediment (38 ± 2 MP/kg) than in water (0.37 ± 0.06 MP/L) as the area has low water energy, allowing MP particles to settle within the sediment. Filter-feeding organisms had the lowest average MP particle concentrations (0.28 ± 0.04 MP/g) but displayed the highest variation of MP particle colours due to the non-selective feeding strategy, where other feeding strategies ingested mostly black/grey particles. The dominant MP size was between 100 μm and 500 μm in size for all samples combined, with the most abundant MP polymer type being nylon (27.27 %), polyethylene terephthalate (PET) (18.18 %) and natural MP particles such as cotton (18.18 %). The risk assessment indicated that polymer type poses a greater risk of MP pollution than MP concentrations.

Larger Common River Frogs (Amietia delalandii) have Fewer and Shorter Tissue Microplastic Fibres than Smaller Frogs

Little is known about microplastics (MPs) in adult frogs. We investigated MPs in adult Common River Frogs (Amietia delalandii) from Potchefstroom, South Africa. Five kinds of samples were analysed: natural water, water used to rinse the skin, skin, intestine, and the remainder of the body (corpus). Tissues were digested. Microplastics occurred in all frogs and sample types (1128 MPs counted). Fibres were the most prevalent MP. Fibre lengths were between 28 and 4300 μm, either polyester or polyvinyl alcohol. MPs in skin were likely derived from the ambient, and MPs in the corpus from translocation via the skin. Fibres in tissues were significantly shorter in larger frogs, a phenomenon we provisionally assign to in situ biodegradation. Microplastics in frogs can potentially be transferred through the food web to higher trophic levels. This study provides the first evidence of MPs in adult frog tissues and avenues for further investigations.

Particulate plastics in drinking water and potential human health effects: Current knowledge for management of freshwater plastic materials in Africa

Plastic materials have contributed to the release of environmentally relevant particulate plastics which can be found almost everywhere and may be present in drinking water. Human exposure to these materials is diverse and our understanding of their internalization in the human body is incipient. This review discusses the state of knowledge of particulate plastics exposure in drinking water and the potential risks of adverse health in the human body. Particulate plastics have problematized water systems worldwide, and about 4,000,000 fine plastics may be ingested from drinking water annually by an individual. Testing methods for these materials in environmental media are presently inconsistent and standard protocols do not exist. Their potential ecotoxicological consequences are recognised to be linked to their physicochemical diversity, biological transpositions, and cytological tolerance in living organisms. It is observed that toxicological endpoints are varied and lack properly defined modes of action. In particular, fine particulate plastics have been observed to translocate into body tissues and cells where they are capable of provoking endocrine disruption, genetic mutations, and cancer responses. We propose a reclassification of particulate plastics to cater for their biological deposition and attributable risks of adverse health. Environmental management of particulate plastics in many developing countries is weak and their potential releases into drinking water have received limited research. Given that large populations are exposed to fresh surface water and plastic packaged drinking water worldwide, and that the risk assessment pathways are unvalidated at the moment, we argue for developing countries to increase their capacity for the environmental monitoring and circular management of plastic materials. Large-scale epidemiological cohort studies and surrogate assessment pathways are also recommended to provide a better understanding of the hazard characterization of particulate plastics exposure.

Comparative Assessment of Microplastics in Surface Waters and Sediments of the Vaal River, South Africa: Abundance, Composition, and Sources

We extracted microplastics from surface water and sediment samples from the Vaal River in Johannesburg, South Africa. Average abundances of 0.61 ± 0.57 particles/ m 3 and 4.6 × 10²  ± 2.8 × 10²  particles/kg dry weight were recorded for water and sediment samples, respectively. In both sediment and water samples, more than 80% of microplastics were fragments and fibers of smaller than 2 mm. High-density polyethylene, low-density polyethylene, and polypropylene were the dominant polymers identified in both sample types. In addition, polyethylene co-vinyl acetate, polyester, polyurethane, and polyethylene/hexene-1-copolymer were also detected in sediment samples. Colored microplastics were the most commonly observed in both sample types; pigment yellow 83 was detected in surface water, and carbon black was detected in both sediment and water samples during Raman analysis. Taking into consideration the physical and chemical characteristics of the detected microplastics, their potential sources include inflow from tributaries, surface run-off from urban city centers, recreational activities, and wastewater effluent from industries and households. Environ Toxicol Chem 2022;41:3029-3040. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Microplastics in Marine Nearshore Surface Waters of Dar es Salaam and Zanzibar, East Africa

Limited information exists on the occurrence of microplastics (MPs) in East African coastal waters. A 300 μm manta net was used to collect surface water from 8 sites in the regions Dar es Salaam (DES) and Zanzibar (ZZ) during low and high tides. DES had a higher (p < 0.05) abundance of MPs than ZZ. Fragments and fibers were the dominant MP types at all sites. The number of fibers was significantly higher (p = 0.002) in DES than in ZZ. MPs were more prevalent during high tide in both DES and ZZ. The MPs within the 2-5 mm size range were identified most often. White and blue MPs were the most common in study sites comprising 45% and 18% of the total MPs respectively. Three polymers polypropylene (PP) high-density polyethylene (HDPE) and low-density polyethylene (LDPE) were identified. The occurrence of MPs in nearshore waters of DES and ZZ is probably due to their proximity to industrial areas, poor solid waste management, and high population pressure.

Microplastics and Heavy Metals Removal from Fresh Water and Wastewater Systems Using a Membrane

Water pollution, resulting from the degradation of plastics into microplastics, exposes humans and other living organisms to contaminated drinking water. Microplastics are capable of adsorbing toxic heavy metals which are carcinogenic and may affect the reproductive functions of living organisms. Hence, this study focuses on the characterization and quantification of microplastics in water to raise the awareness and propose a method of dealing with this emerging pollutant in various aqueous environments. The microplastics were separated from water using polyvinylidene difluoride (PVDF) and PVDF modified with carbon nano-onions (CNOs). The PVDF exhibited the highest concentration of microplastics in the wastewater influent (140 ± 1.85 MP/L) compared to the effluent (8.8 ± 2.10 MP/L), tap water (6.5 ± 5.77 MP/L), and lake water (10 ± 2.65 MP/L). The stereo microscope displayed red, blue, and black colored plastics. The morphological properties were determined using SEM. ATR-FTIR, equipped with Spectrum 10 Spectroscopy Software was used to establish the presence of high-density polyethylene (50%), poly(1,4-butylene terephthalate) (16.6%), nylon 12 (16.6%), and cellulose (16.6%) in the influent. The quantification of heavy metals extracted from the microplastics indicated that the concentrations of As (1.759 to 8.699 mg/L), Cu (83.176 mg/L) and Zn (0.610 mg/L) were above the acceptable limits. Our work is beneficial for the development of a microplastics monitoring protocol for various municipalities. Water treatment plants may also include the treatment of microplastics in the influent and monitor the effluent before the water is released back into the environment.

Potential microplastics impacts on African fishing resources

Microplastic (MP) pollution is increasing worldwide and affecting aquatic fauna in different ways, which endangers current aquatic resources in a still unknown extent. MP-induced threats to marine fauna are critical for developing countries, where waste treatment may be not optimal and coastal communities rely heavily on marine resources for dietary protein. In this study, we assess the importance of MP pollution for African fishing resources. A new meta-database was created from published studies, containing 156 samples with more than 6200 individuals analysed for microplastic content from African and adjacent waters. A combination of research landscape analysis and rank analysis served to identify main research targets and to determine regional fishing resources especially affected by MP. A network of relevant terms showed fish health as a concern in Mediterranean waters, environmental pollution in freshwater and an emphasis on plastic items in South Africa. MP contents in fishing resources from Nile countries and the Gulf of Guinea, followed by Tunisia, are significantly higher than in other regions. Some of the most exploited species are among the most polluted ones, highlighting the threat of MP pollution in valuable but already compromised African fishing resources. Large geographic gaps with almost absent data about MP in aquatic fauna were revealed, especially in freshwater and in East African coasts. These results emphasize the importance of increasing the coverage of MP pollution in African fishing resources, and improving plastic waste management in the continent.

Life cycle assessment of single-use and reusable plastic bottles in the city of Johannesburg

Polyethylene terephthalate (PET) bottles of water have experienced huge growth in demand and sales in South Africa. This expansion in use creates challenges as well as opportunities for managing the life cycle impact. The properties that make PET desirable for fluid-containing bottles have also made it highly resistant to environmental biodegradation. Reusable plastic bottles are now marketed as a solution to reduce the impact of single-use plastic bottles. We assessed the life cycle impact of single-use PET bottles and an alternative, reusable PET bottle based on consumption patterns in South Africa and the material flow and supply chain in the urban environment. This robust consideration of local conditions is important in evaluating the life cycle impact. In an examination of 13 impact categories, the reusable PET bottle had lower impact than the single-use bottle in all the impact categories examined. The mass of PET bottle material required to deliver the water needs at any given time is a dominant factor on the environmental burden. Extending the life of reusable bottles and designing lighter weight bottles would reduce their life cycle impact. Information obtained in evaluating alternatives to plastic water bottles can be valuable for providing a foundation assessment for policymakers and plastic bottle manufacturers to make informed choices and to focus on improvements in life cycle impact.

Current Progress on Marine Microplastics Pollution Research: A Review on Pollution Occurrence, Detection, and Environmental Effects

Recently, microplastics pollution has attracted much attention in the environmental field, as researchers have found traces of microplastics in both marine and terrestrial ecological environments. Here, we reviewed and discussed the current progress on microplastics pollution in the marine environment from three main aspects including their identification and qualification methods, source and distribution, and fate and toxicity in a marine ecosystem. Microplastics in the marine environment originate from a variety of sources and distribute broadly all around the world, but their quantitative information is still lacking. Up to now, there have been no adequate and standard methods to identify and quantify the various types of microplastics, which need to be developed and unified. The fate of microplastics in the environment is particularly important as they may be transferred or accumulated in the biological chain. Meanwhile, microplastics may have a high adsorption capacity to pollutants, which is the basic research to further study their fate and joint toxicity in the environment. Therefore, all the findings are expected to fill the knowledge gaps in microplastics pollution and promote the development of relative regulations.

Abundance and characteristics of microplastics in retail mussels from Cape Town, South Africa

With the increased occurrence of plastics in the marine environment, ingestion of microplastics (MPs) by marine invertebrates such as mussels is increasing globally. This study investigated the occurrence of microplastics in mussels sold at supermarkets and wholesalers in Cape Town, South Africa. Soft tissue was extracted from mussels, digested and identified by microscopy and FTIR-ATR. MP filaments (70%) and fragments (30%) were the only types of MPs identified and an average of 0.04 MPs/g soft tissue and 3.8 MPs/mussel recorded. Blue/green (44%) and black/grey (40%), smaller than 2000 μm were the most prominent MPs recorded and the main polymer type was filamentous polyethylene terephthalate (PET). Our results suggest that retail mussels in Cape Town do not contain as high concentrations of MPs when compared to other investigations and routine monitoring of seafood in the country is suggested.

Environmental fate and impacts of microplastics in aquatic ecosystems: a review

Wide usage of plastic products leads to the global occurrence of microplastics (MPs) in the aquatic environment. Due to the small size, they can be bio-ingested, which may cause certain health effects. The present review starts with summarizing the main sources of various types of MPs and their occurrences in the aquatic environment, as well as their transportation and degradation pathways. The analysis of migration of MPs in water environments shows that the ultimate fate of most MPs in water environments is cracked into small fragments and sinking into the bottom of the ocean. The advantages and disadvantages of existing methods for detection and analysis of MPs are summarized. In addition, based on recent researches, the present review discusses MPs as carriers of organic pollutants and microorganisms, and explores the specific effects of MPs on aquatic organisms in the case of single and combined pollutants. Finally, by analysing the causes and influencing factors of their trophic transfer, the impact of MPs on high-level trophic organisms is explored.

The sources, fate and impacts of microplastics in aquatic ecosystems.

Filling in the knowledge gap: Observing MacroPlastic litter in South Africa's rivers

Only 12% of the world's published plastic research includes references to Africa despite it being a significant contributor to the global plastic waste and mismanagement problem (~88.5% of Africa's plastic waste is mismanaged). Ocean plastics are transported from land by rivers to the sea. However, source contextualization is complex. Many African rivers predominantly run alongside human settlements that host informal waste dumpsites. In this study a simple cost effective, easily deployed, consistent and replicable survey methodology was employed. The study quantified macroplastic in three rivers discharging into Algoa Bay, South Africa. The results indicated that industrial Swartkops and metropolitan Baakens Rivers both illustrate moderate plastic pollution (>3000 plastic particles/day), with the relatively natural Sundays River to showing minimal evidence of river macro plastic (<100 plastic particles/day). The types of plastic were noted using the RIMMEL app (premier African implementation), enabling proportional comparison of different plastic litter types to be completed.

The microplastic profile of an urban African stream

Microplastics are small plastic fragments that have been found around the world, however, research into microplastics in Africa and freshwater systems remains insufficient. In this study, the snapshot microplastic profile of an urban stream was assessed in the Braamfontein Spruit, located in Johannesburg the largest city in South Africa. The abundance of microplastics was determined in water, Chironomus sp. larvae and sediment, while in situ parameters were taken to investigate their relationship to the microplastic profile of the different matrices. Microplastics were detected in water (mean of 705 particles m-³), Chironomus sp. larvae (mean of 53.4 particles g-¹ wet weight) and sediment (mean of 166.8 particles kg-¹ dry weight). The study found evidence of how urban stream characteristics such as a weir, stream depth and velocity could affect the abundance and dispersion of microplastics. The results indicate that areas of increased depth and decreased flow allowed microplastics to settle down to the sediment where benthic macroinvertebrates could ingest these fragments. Large obstructions like a weir also increased microplastic counts in sediment and invertebrates above the obstruction, with a decrease of fragments after the obstruction, however, microplastics in surface water were able to flow over the obstruction and increase in abundance downstream. This study concludes that first order urban streams such as the Braamfontein Spruit may be contributing large numbers of microplastics to higher order streams and large rivers in times of increased flow.

Spatiotemporal variation in microplastic contamination along a subtropical reservoir shoreline

Microplastics have become a major environmental concern globally due to their potential impact on ecosystem function. They are known to be ubiquitously present, persistent and bio-accumulative, yet there is a lack of abundance quantifications in freshwater shorelines. Furthermore, there is little understanding of combined effects of seasonality and human population density on the extent of microplastic pollution. In this study, we assessed microplastics in sediment along a subtropical reservoir shoreline across three seasons and seven sites to understand microplastic pollution dynamics along a human population gradient. Multivariable analysis was used to assess relationships among substrate embeddedness, sediment organic matter, human population density and microplastic particle densities and characteristics. Microplastic densities were relatively high during the hot-dry season (mean range 120-6417 particles kg^-1 dwt) whilst the hot-wet season had the lowest densities (mean range 5-94 particles kg^-1 dwt). Microplastic abundances were positively correlated with population density, demonstrating the direct effects of human activity on microplastic contamination. These results highlight the need to further explore microplastic distribution patterns in freshwater ecosystems in the Southern Hemisphere. Furthermore, our findings suggest particular risk for fauna during low rainfall periods through microplastic concentration effects.

Microplastics in aquatic environment: characterization, ecotoxicological effect, implications for ecosystems and developments in South Africa

Microplastics are small-size plastic piece scales (particles < 5 mm) in sediments and waters which interact with environment and organisms by various means. Microplastics are becoming a universal ecological concern since they may be a source of hazardous chemicals to marine organisms and environments. Recent research suggests microplastics could enable the transfer of hydrophobic aquatic pollutants or chemical additives to biota. Even though microplastic presence and interactions are recently being detected in marine and freshwater systems, the fate of microplastics is still very poorly understood. This literature review is a summary of the sources and transport of microplastics, their interactions with toxic chemicals and the methodologies for chemical quantification and characterization of microplastics. The environmental outcome and impact of microplastics in wastewater treatment plants were assessed as well as the trends and update on microplastic research in the South African aquatic ecosystem.

Impacts of plastic debris on biota and implications for human health: A South African perspective

Entanglement and ingestion of plastics are the main ecological impacts of marine plastic debris on marine biota, but indirect effects such as the transport of alien species and benthic smothering are also important to note. Entanglement of invertebrates, sharks, turtles, birds and marine mammals is mainly caused by macroplastics (>5 mm), and leads to reduced mobility, ineffective foraging and subsequent mortality. The main plastic types associated with entanglement are improperly discarded fishing nets, lines, ropes and straps. In South Africa and surrounding waters, plastic ingestion has been reported in a number of marine species: sharks (n=10), fish (n>=7), turtles (n=1) and birds (n=36). Lethal (macroplastic) and sub-lethal effects (microplastic ≤5 mm) of marine debris on biota have been noted, but at the time of this review there were no published reports on impacts at the population level. Consumed shellfish are possible vectors for the introduction of microplastics into humans. The specific impacts of microplastic ingestion on human health are largely unknown, but additives associated with plastics represent a threat. The research infrastructure in South Africa is insufficient to monitor and characterise marine plastic debris and, in many cases, not in line with global standards. More research effort is needed to understand the impacts of marine plastic debris on humans and marine biota in South Africa, particularly at the population level. Significance • Macroplastics affect marine biota mainly via entanglement and microplastics largely through ingestion. • Macro- and microplastic interactions with biota can result in sub-lethal effects and mortality but no population effects have been reported for South Africa. • Consumed shellfish are a potential source of microplastics for humans but their potential effects in humans remain unknown. • Better infrastructure is needed for improved monitoring and research on the effects of marine debris in South Africa.

Land-based sources and pathways of marine plastics in a South African context

We review and evaluate the major land-based sources and pathways of plastic waste that lead to marine pollution in a South African context. Many of the formal solid waste and waste-water management facilities in South Africa are not fully functional, contributing towards plastic releases to the environment. Much plastic also enters the environment directly by informal and illegal dumping. Once in the environment, plastic is transported and distributed by air, inland waterways and human activity, with complex dynamics that are not fully understood. Depending on the size and type of plastic and environmental factors like wind action and run-off, plastic can be deposited into sinks such as soil, river sediments and vegetation, or carried to the ocean. Contrary to an initial assumption that South Africa is the 11th worst contributor to marine plastic pollution, we estimate from more accurate and recent data that between 15 000 and 40 000 tonnes per year is carried to the oceans. This amount is six-fold less than a previous estimate. Despite many data and information gaps that require urgent attention through research and monitoring, it is clear that the status quo will lead to a worsening of already severe plastic pollution of all environments. South Africa needs to reduce plastic entering the environment by reducing illegal and informal dumping, effectively implementing and improving waste management infrastructure, and intensifying long-term awareness campaigns. Most importantly, however, immediate and effective mitigation is required. Significance: • More accurate and recent data show that between 15 000 and 40 000 tonnes of plastic is carried to the oceans from South Africa per year – six-fold less than the widely used previous estimate. • Riverine sediments are potentially major sinks for plastic en route to the ocean. • Management of treated waste-water sludge, as well as the state of waste-water treatment plants (WWTPs) are key concerns. WWTPs are reported to remove most plastic from the water content. The state of South African WWTPs have deteriorated to such an extent that up to 40% of the country’s waste water is untreated and data and management practices of sludge are unavailable. • There are major data gaps in the South African waste sector, which lead to miscalculations and uncertainties about the country’s contribution to marine plastic debris.

Plastics in municipal drinking water and wastewater treatment plant effluents: challenges and opportunities for South Africa-a review

Pervasive plastic wastes, pollution and detrimental environmental ethics are a serious threat in South Africa. Compared with global trends, most studies undertaken on plastic pollutions in water bodies across South Africa have generally been limited to marine and coastal waters. A literature review, for the last 40 years, demonstrated the scanty studies on the economic, social, health and cost implications of plastic entrainment into fresh water (sources of drinking water) and wastewater systems in South Africa. Hence, demonstrating a knowledge gap on this imperative issue, the inadequate and limited frameworks needed in assessing, evaluating and re-evaluating the menace of plastic pollution and entrainments into consumable water and wastewater treatment plants. This has hampered the local capacity, manpower, knowledge and understanding direly needed for mitigating these challenges. This work is necessitated because of the dire need in bridging the knowledge gap locally by adaptively reviewing possible challenges and opportunities for South Africa in meeting up the mandate of addressing this global threat. The emerging agreement amongst global policy-makers, educators and scientists is that environmental challenges, such as this, require, now more than ever, renewed ways of effective knowledge production and decision-making in tackling, holistically the menace of mismanaged plastic wastes and pollutions. These include but not limited to plastic education curriculum, synergised policies in fostering a circular plastic economy, overriding political will, innovative waste management systems, inclusive independent monitoring of plastic wastes, robust laws and effective enforcement strategies that are needed to promote better environmental ethics, mitigation and a sustainable environment.

High-Resolution Mapping of Japanese Microplastic and Macroplastic Emissions from the Land into the Sea

Plastic debris presents a serious hazard to marine ecosystems worldwide. In this study, we developed a method to evaluate high-resolution maps of plastic emissions from the land into the sea offshore of Japan without using mismanaged plastic waste. Plastics were divided into microplastics (MicPs) and macroplastics (MacPs), and correlations between the observed MicP concentrations in rivers and basin characteristics, such as the urban area ratio and population density, were used to evaluate nationwide MicP concentration maps. A simple water balance analysis was used to calculate the annual outflow for each 1 km mesh to obtain the final MicP emissions, and the MacP input was evaluated based on the MicP emissions and the ratio of MacP/MicP obtained according to previous studies. Concentration data revealed that the MicP concentrations and basin characteristics were significantly and positively correlated. Water balance analyses demonstrated that our methods performed well for evaluating the annual flow rate, while reducing the computational load. The total plastic input (MicP + MacP) was widely distributed from 210–4776 t/yr and a map showed that plastic emissions were high for densely populated and highly urbanized areas in the Tokyo metropolitan area, as well as other large urban areas, especially Nagoya and Osaka. These results provide important insights that may be used to develop countermeasures against plastic pollution and the methods employed herein can also be used to evaluate plastic emissions in other regions.

Assessment of the sources and inflow processes of microplastics in the river environments of Japan

The numerical and mass concentrations of microplastics collected at 36 sites on the surfaces of 29 Japanese rivers were mapped and compared with four basin characteristics (basin area, population density, and urban and agricultural ratios) and six water quality parameters (pH, biochemical oxygen demand (BOD), suspended solids (SS), dissolved oxygen (DO), total nitrogen (T-N), and total phosphorus (T-P)) in each river basin. Microplastics were found in 31 of the 36 sites, indicating that some plastics fragment into small pieces before reaching the ocean. The microplastic concentrations are significantly correlated with urbanisation and population density, indicating that the microplastic concentrations in the river depend on human activities in the river basin. Furthermore, we found a significant relationship between the numerical and mass concentrations and BOD, which is an environmental indicator of river pollution. This result demonstrates that microplastic pollution in river environments has progressed more in polluted rivers with poor water quality than in rivers with good water quality, leading to the conclusion that the sources and inflow processes of microplastics in river environments are similar to those of other pollutants. Our findings can help identify potential sources (i.e., point and non-point sources) of fragmented microplastics to improve waste management in Japan and model the transport fluxes of fragmented microplastics in Japanese rivers using water quality parameters and basin characteristics.

A new approach in separating microplastics from environmental samples based on their electrostatic behavior

Numerous studies on microplastics (MPs; Ø < 5 mm) in the aquatic environment have been published, but knowledge about the occurrence and ecological risks of MPs is limited. This is in part because current data on the distribution of MPs are comparable only to a limited extent, due to the many different methods of investigation. In addition, sample preparation is often difficult such that standard procedures are lacking. The aim of this work was to simplify the preparation of different kinds of MP samples. Our method makes use of the electrostatic behavior of plastic particles to facilitate their separation from sample matter, with up to 99% of the original sample mass removed without any loss of MPs. To determine the efficacy of this approach, four different materials (quartz sand, freshwater suspended particulate matter, freshwater sediment, and beach sand) were spiked with MPs (size: 0.063-5 mm from the seven most common types of plastics, one bioplastic type, polyethylene fibers, and tire wear. A modified electrostatic metal/plastic separator was used to reduce the sample mass and concentrate the plastics based on their physical separation. The recovery achieved with this method was as high as nearly 100% for each type of material. The method was then tested on plastic particles of different shapes and types isolated from the Rhine River. These were successfully electroseparated from the four materials, which demonstrated the utility of this method. Its advantages include the simplified handling and preparation of different field samples as well as a much shorter processing time, because after the last separation step there is hardly any biological material remaining in the sample fraction.