Release of a chimeric protein into the medium from Escherichia coli using the C-terminal secretion signal of haemolysin

Discovery and Identification of a Novel Tag of HlyA60 for Protein Active Aggregate Formation in Escherichia coli

The strategy of active aggregation tag fusion expression with target proteins can solve the problems of restricted expression, inefficient purification, and laborious immobilization faced in the production of recombinant proteins in Escherichia coli. We localized a novel active aggregation peptide HlyA60 from the hemolysin A secretion system, which can effectively induce aggregate formation with satisfactory protein activities in E. coli after fusion expression with the protein of interest. Based on structural prediction and surface properties, the process of active aggregation of HlyA60 through electrostatic interactions and hydrophobic interactions was analyzed. To investigate the potential application of HlyA60 as an efficient aggregation tag, it was fused with acetyl xylan esterase and lipase A, separately. The resulting fusion proteins demonstrated active aggregation rates of 97.6 and 66.7%, respectively, leading to 1.9-fold and 1.7-fold increases in bacterial density at the end of fermentation. The AXE-HlyA60 fusion protein, which exhibited superior performance, was subjected to purification and immobilization. It was able to achieve column-free purification with an impressive 98.8% recovery and in situ immobilization; the immobilization enabled 30 cycles of reactions to take place with 85% residual activity maintained. Our findings provide a novel tool for efficiently producing recombinant proteins in E. coli.

Redefining the bacterial Type I protein secretion system

Type I secretion systems (T1SS) are versatile molecular machines for protein transport across the Gram-negative cell envelope. The archetypal Type I system mediates secretion of the Escherichia coli hemolysin, HlyA. This system has remained the pre-eminent model of T1SS research since its discovery. The classic description of a T1SS is composed of three proteins: an inner membrane ABC transporter, a periplasmic adaptor protein and an outer membrane factor. According to this model, these components assemble to form a continuous channel across the cell envelope, an unfolded substrate molecule is then transported in a one-step mechanism, directly from the cytosol to the extracellular milieu. However, this model does not encapsulate the diversity of T1SS that have been characterized to date. In this review, we provide an updated definition of a T1SS, and propose the subdivision of this system into five subgroups. These subgroups are categorized as T1SSa for RTX proteins, T1SSb for non-RTX Ca²⁺-binding proteins, T1SSc for non-RTX proteins, T1SSd for class II microcins, and T1SSe for lipoprotein secretion. Although often overlooked in the literature, these alternative mechanisms of Type I protein secretion offer many avenues for biotechnological discovery and application.

Kingella kingae RtxA Cytotoxin in the Context of Other RTX Toxins

The Gram-negative bacterium Kingella kingae is part of the commensal oropharyngeal flora of young children. As detection methods have improved, K. kingae has been increasingly recognized as an emerging invasive pathogen that frequently causes skeletal system infections, bacteremia, and severe forms of infective endocarditis. K. kingae secretes an RtxA cytotoxin, which is involved in the development of clinical infection and belongs to an ever-growing family of cytolytic RTX (Repeats in ToXin) toxins secreted by Gram-negative pathogens. All RTX cytolysins share several characteristic structural features: (i) a hydrophobic pore-forming domain in the N-terminal part of the molecule; (ii) an acylated segment where the activation of the inactive protoxin to the toxin occurs by a co-expressed toxin-activating acyltransferase; (iii) a typical calcium-binding RTX domain in the C-terminal portion of the molecule with the characteristic glycine- and aspartate-rich nonapeptide repeats; and (iv) a C-proximal secretion signal recognized by the type I secretion system. RTX toxins, including RtxA from K. kingae, have been shown to act as highly efficient 'contact weapons' that penetrate and permeabilize host cell membranes and thus contribute to the pathogenesis of bacterial infections. RtxA was discovered relatively recently and the knowledge of its biological role remains limited. This review describes the structure and function of RtxA in the context of the most studied RTX toxins, the knowledge of which may contribute to a better understanding of the action of RtxA in the pathogenesis of K. kingae infections.

Identity Determinants of the Translocation Signal for a Type 1 Secretion System

The toxin hemolysin A was first identified in uropathogenic E. coli strains and shown to be secreted in a one-step mechanism by a dedicated secretion machinery. This machinery, which belongs to the Type I secretion system family of the Gram-negative bacteria, is composed of the outer membrane protein TolC, the membrane fusion protein HlyD and the ABC transporter HlyB. The N-terminal domain of HlyA represents the toxin which is followed by a RTX (Repeats in Toxins) domain harboring nonapeptide repeat sequences and the secretion signal at the extreme C-terminus. This secretion signal, which is necessary and sufficient for secretion, does not appear to require a defined sequence, and the nature of the encoded signal remains unknown. Here, we have combined structure prediction based on the AlphaFold algorithm together with functional and in silico data to examine the role of secondary structure in secretion. Based on the presented data, a C-terminal, amphipathic helix is proposed between residues 975 and 987 that plays an essential role in the early steps of the secretion process.

Biotechnological applications of type 1 secretion systems

Bacteria have evolved a diverse range of secretion systems to export different substrates across their cell envelope. Although secretion of proteins into the extracellular space could offer advantages for recombinant protein production, the low secretion titers of the secretion systems for some heterologous proteins remain a clear drawback of their utility at commercial scales. Therefore, a potential use of most of secretion systems as production platforms at large scales are still limited. To overcome this limitation, remarkable efforts have been made toward improving the secretion efficiency of different bacterial secretion systems in recent years. Here, we review the progress with respect to biotechnological applications of type I secretion system (T1SS) of Gram-negative bacteria. We will also focus on the applicability of T1SS for the secretion of heterologous proteins as well as vaccine development. Last but not least, we explore the employed engineering strategies that have enhanced the secretion efficiencies of T1SS. Attention is also paid to directed evolution approaches that may offer a more versatile approach to optimize secretion efficiency of T1SS.

Secrete or perish: The role of secretion systems in Xanthomonas biology

Bacteria of the Xanthomonas genus are mainly phytopathogens of a large variety of crops of economic importance worldwide. Xanthomonas spp. rely on an arsenal of protein effectors, toxins and adhesins to adapt to the environment, compete with other microorganisms and colonize plant hosts, often causing disease. These protein effectors are mainly delivered to their targets by the action of bacterial secretion systems, dedicated multiprotein complexes that translocate proteins to the extracellular environment or directly into eukaryotic and prokaryotic cells. Type I to type VI secretion systems have been identified in Xanthomonas genomes. Recent studies have unravelled the diverse roles played by the distinct types of secretion systems in adaptation and virulence in xanthomonads, unveiling new aspects of their biology. In addition, genome sequence information from a wide range of Xanthomonas species and pathovars have become available recently, uncovering a heterogeneous distribution of the distinct families of secretion systems within the genus. In this review, we describe the architecture and mode of action of bacterial type I to type VI secretion systems and the distribution and functions associated with these important nanoweapons within the Xanthomonas genus.

Type I Secretion Systems-One Mechanism for All?

Type I secretion systems (T1SS) are widespread in Gram-negative bacteria, especially in pathogenic bacteria, and they secrete adhesins, iron-scavenger proteins, lipases, proteases, or pore-forming toxins in the unfolded state in one step across two membranes without any periplasmic intermediate into the extracellular space. The substrates of T1SS are in general characterized by a C-terminal secretion sequence and nonapeptide repeats, so-called GG repeats, located N terminal to the secretion sequence. These GG repeats bind Ca²⁺ ions in the extracellular space, which triggers folding of the entire protein. Here we summarize our current knowledge of how Gram-negative bacteria secrete these substrates, which can possess a molecular mass of up to 1,500 kDa. We also describe recent findings that demonstrate that the absence of periplasmic intermediates, the "classic" mode of action, does not hold true for all T1SS and that we are beginning to realize modifications of a common theme.

Screening and purification of nanobodies from E. coli culture supernatants using the hemolysin secretion system

BACKGROUND

The hemolysin (Hly) secretion system of E. coli allows the one-step translocation of hemolysin A (HlyA) from the bacterial cytoplasm to the extracellular medium, without a periplasmic intermediate. In this work, we investigate whether the Hly secretion system of E. coli is competent to secrete a repertoire of functional single-domain VHH antibodies (nanobodies, Nbs), facilitating direct screening of VHH libraries and the purification of selected Nb from the extracellular medium.

RESULTS

We employed a phagemid library of VHHs obtained by immunization of a dromedary with three protein antigens from enterohemorrhagic E. coli (EHEC), namely, the extracellular secreted protein A (EspA), the extracellular C-terminal region of Intimin (Int280), and the translocated intimin receptor middle domain (TirM). VHH clones binding each antigen were enriched and amplified by biopanning, and subsequently fused to the C-terminal secretion signal of HlyA to be expressed and secreted in a E. coli strain carrying the Hly export machinery (HlyB, HlyD and TolC). Individual E. coli clones were grown and induced in 96-well microtiter plates, and the supernatants of the producing cultures directly used in ELISA for detection of Nbs binding EspA, Int280 and TirM. A set of Nb sequences specifically binding each of these antigens were identified, indicating that the Hly system is able to secrete a diversity of functional Nbs. We performed thiol alkylation assays demonstrating that Nbs are correctly oxidized upon secretion, forming disulphide bonds between cysteine pairs despite the absence of a periplasmic intermediate. In addition, we show that the secreted Nb-HlyA fusions can be directly purified from the supernatant of E. coli cultures, avoiding cell lysis and in a single affinity chromatography step.

CONCLUSIONS

Our data demonstrate the Hly secretion system of E. coli can be used as an expression platform for screening and purification of Nb binders from VHH repertories.

Developing Gram-negative bacteria for the secretion of heterologous proteins

Gram-negative bacteria are attractive hosts for recombinant protein production because they are fast growing, easy to manipulate, and genetically stable in large cultures. However, the utility of these microbes would expand if they also could secrete the product at commercial scales. Secretion of biotechnologically relevant proteins into the extracellular medium increases product purity from cell culture, decreases downstream processing requirements, and reduces overall cost. Thus, researchers are devoting significant attention to engineering Gram-negative bacteria to secrete recombinant proteins to the extracellular medium. Secretion from these bacteria operates through highly specialized systems, which are able to translocate proteins from the cytosol to the extracellular medium in either one or two steps. Building on past successes, researchers continue to increase the secretion efficiency and titer through these systems in an effort to make them viable for industrial production. Efforts include modifying the secretion tags required for recombinant protein secretion, developing methods to screen or select rapidly for clones with higher titer or efficiency, and improving reliability and robustness of high titer secretion through genetic manipulations. An additional focus is the expression of secretion machineries from pathogenic bacteria in the "workhorse" of biotechnology, Escherichia coli, to reduce handling of pathogenic strains. This review will cover recent advances toward the development of high-expressing, high-secreting Gram-negative production strains.

Type 1 Does the Two-Step: Type 1 Secretion Substrates with a Functional Periplasmic Intermediate

Bacteria have evolved several secretion strategies for polling and responding to environmental flux and insult. Of these, the type 1 secretion system (T1SS) is known to secrete an array of biologically diverse proteins-from small, <10-kDa bacteriocins to gigantic adhesins with a mass >1 MDa. For the last several decades, T1SSs have been characterized as a one-step translocation strategy whereby the secreted substrate is transported directly into the extracellular environment from the cytoplasm with no periplasmic intermediate. Recent phylogenetic, biochemical, and genetic evidences point to a distinct subgroup of T1SS machinery linked with a bacterial transglutaminase-like cysteine proteinase (BTLCP), which uses a two-step secretion mechanism. BTLCP-linked T1SSs transport a class of repeats-in-toxin (RTX) adhesins that are critical for biofilm formation. The prototype of this RTX adhesin group, LapA of Pseudomonas fluorescens Pf0-1, uses a novel N-terminal retention module to anchor the adhesin at the cell surface as a secretion intermediate threaded through the outer membrane-localized TolC-like protein LapE. This secretion intermediate is posttranslationally cleaved by the BTLCP family LapG protein to release LapA from its cognate T1SS pore. Thus, the secretion of LapA and related RTX adhesins into the extracellular environment appears to be a T1SS-mediated two-step process that involves a periplasmic intermediate. In this review, we contrast the T1SS machinery and substrates of the BLTCP-linked two-step secretion process with those of the classical one-step T1SS to better understand the newly recognized and expanded role of this secretion machinery.

Secretion of recombinant proteins from E. coli

The microorganism Escherichia coli is commonly used for recombinant protein production. Despite several advantageous characteristics like fast growth and high protein yields, its inability to easily secrete recombinant proteins into the extracellular medium remains a drawback for industrial production processes. To overcome this limitation, a multitude of approaches to enhance the extracellular yield and the secretion efficiency of recombinant proteins have been developed in recent years. Here, a comprehensive overview of secretion mechanisms for recombinant proteins from E. coli is given and divided into three main sections. First, the structure of the E. coli cell envelope and the known natural secretion systems are described. Second, the use and optimization of different one- or two-step secretion systems for recombinant protein production, as well as further permeabilization methods are discussed. Finally, the often-overlooked role of cell lysis in secretion studies and its analysis are addressed. So far, effective approaches for increasing the extracellular protein concentration to more than 10 g/L and almost 100% secretion efficiency exist, however, the large range of optimization methods and their combinations suggests that the potential for secretory protein production from E. coli has not yet been fully realized.

An A/U-Rich Enhancer Region Is Required for High-Level Protein Secretion through the HlyA Type I Secretion System

Efficient protein secretion is often a valuable alternative to classic cellular expression to obtain homogenous protein samples. Early on, bacterial type I secretion systems (T1SS) were employed to allow heterologous secretion of fusion proteins. However, this approach was not fully exploited, as many proteins could not be secreted at all or only at low levels. Here, we present an engineered microbial secretion system which allows the effective production of proteins up to a molecular mass of 88 kDa. This system is based on the hemolysin A (HlyA) T1SS of the Gram-negative bacterium Escherichia coli, which exports polypeptides when fused to a hemolysin secretion signal. We identified an A/U-rich enhancer region upstream of hlyA required for effective expression and secretion of selected heterologous proteins irrespective of their prokaryotic, viral, or eukaryotic origin. We further demonstrate that the ribosomal protein S1 binds to the hlyA A/U-rich enhancer region and that this region is involved in the high yields of secretion of functional proteins, like maltose-binding protein or human interferon alpha-2.IMPORTANCE A 5' untranslated region of the mRNA of substrates of type I secretion systems (T1SS) drastically enhanced the secretion efficiency of the endogenously secreted protein. The identification of ribosomal protein S1 as the interaction partner of this 5' untranslated region provides a rationale for the enhancement. This strategy furthermore can be transferred to fusion proteins allowing a broader, and eventually a more general, application of this system for secreting heterologous fusion proteins.

Type I Protein Secretion-Deceptively Simple yet with a Wide Range of Mechanistic Variability across the Family

A very large type I polypeptide begins to reel out from a ribosome; minutes later, the still unidentifiable polypeptide, largely lacking secondary structure, is now in some cases a thousand or more residues longer. Synthesis of the final hundred C-terminal residues commences. This includes the identity code, the secretion signal within the last 50 amino acids, designed to dock with a waiting ATP binding cassette (ABC) transporter. What happens next is the subject of this review, with the main, but not the only focus on hemolysin HlyA, an RTX protein toxin secreted by the type I system. Transport substrates range from small peptides to giant proteins produced by many pathogens. These molecules, without detectable cellular chaperones, overcome enormous barriers, crossing two membranes before final folding on the cell surface, involving a unique autocatalytic process.Unfolded HlyA is extruded posttranslationally, C-terminal first. The transenvelope "tunnel" is formed by HlyB (ABC transporter), HlyD (membrane fusion protein) straddling the inner membrane and periplasm and TolC (outer membrane). We present a new evaluation of the C-terminal secretion code, and the structure function of HlyD and HlyB at the heart of this nanomachine. Surprisingly, key details of the secretion mechanism are remarkably variable in the many type I secretion system subtypes. These include alternative folding processes, an apparently distinctive secretion code for each type I subfamily, and alternative forms of the ABC transporter; most remarkably, the ABC protein probably transports peptides or polypeptides by quite different mechanisms. Finally, we suggest a putative structure for the Hly-translocon, HlyB, the multijointed HlyD, and the TolC exit.

Directionality of substrate translocation of the hemolysin A Type I secretion system

Type 1 secretion systems (T1SS) of Gram-negative bacteria are responsible for the secretion of various proteases, lipases, S-layer proteins or toxins into the extracellular space. The paradigm of these systems is the hemolysin A (HlyA) T1SS of Escherichia coli. This multiple membrane protein complex is able to secrete the toxin HlyA in one step across both E. coli membranes. Common to all secreted T1SS substrates is a C-terminal secretion sequence being necessary as well as sufficient for secretion. However, it is not known whether transport occurs directionally, i.e. the N- or the C-terminus of T1SS substrates is secreted first. We have addressed this question by constructing HlyA fusions with the rapidly folding eGFP resulting in a stalled T1SS. Differential labeling and subsequent fluorescence microscopic detection of C- and N-terminal parts of the fusions allowed us to demonstrate vectorial transport of HlyA through the T1SS with the C-terminus appearing first outside the bacterial cells.

A sequence-based two-level method for the prediction of type I secreted RTX proteins

Many Gram-negative bacteria use the type I secretion system (T1SS) to translocate a wide range of substrates (type I secreted RTX proteins, T1SRPs) from the cytoplasm across the inner and outer membrane in one step to the extracellular space. Since T1SRPs play an important role in pathogen-host interactions, identifying them is crucial for a full understanding of the pathogenic mechanism of T1SS. However, experimental identification is often time-consuming and expensive. In the post-genomic era, it becomes imperative to predict new T1SRPs using information from the amino acid sequence alone when new proteins are being identified in a high-throughput mode. In this study, we report a two-level method for the first attempt to identify T1SRPs using sequence-derived features and the random forest (RF) algorithm. At the full-length sequence level, the results show that the unique feature of T1SRPs is the presence of variable numbers of the calcium-binding RTX repeats. These RTX repeats have a strong predictive power and so T1SRPs can be well distinguished from non-T1SRPs. At another level, different from that of the secretion signal, we find that a sequence segment located at the last 20-30 C-terminal amino acids may contain important signal information for T1SRP secretion because obvious differences were shown between the corresponding positions of T1SRPs and non-T1SRPs in terms of amino acid and secondary structure compositions. Using five-fold cross-validation, overall accuracies of 97% at the full-length sequence level and 89% at the secretion signal level were achieved through feature evaluation and optimization. Benchmarking on an independent dataset, our method could correctly predict 63 and 66 of 74 T1SRPs at the full-length sequence and secretion signal levels, respectively. We believe that this study will be useful in elucidating the secretion mechanism of T1SS and facilitating hypothesis-driven experimental design and validation.

Molecular insights into type I secretion systems

Type 1 secretion systems are one of the main machineries in Gram-negative bacteria involved in the secretion of a wide range of substrates from the cytoplasm across the inner and outer membrane in one step to the extracellular space. The range of substrates varies from small proteins up to large surface layer proteins of about 900 kDa. Most of the substrates have a non-cleavable C-terminal secretion signal and so-called GG repeats that are able to bind calcium ions. The translocator complex is composed of a trimeric outer membrane protein that provides a pore in the outer membrane. A multimeric membrane fusion protein spans the periplasm and forms a continuous channel connecting the outer membrane protein with a dimeric ATP-binding cassette transporter in the inner membrane. The ATP-binding cassette-transporter is thought to form a channel through the inner membrane and energizes the transport process. This review will provide a detailed view of the components of the translocator and will summarize structural as well as functional data.

Secretion of polyhydroxybutyrate in Escherichia coli using a synthetic biological engineering approach

BACKGROUND

Polyhydroxyalkanoates (PHAs) are a group of biodegradable plastics that are produced by a wide variety of microorganisms, mainly as a storage intermediate for energy and carbon. Polyhydroxybutyrate (PHB) is a short-chain-length PHA with interesting chemical and physical properties. Large scale production of PHB is not wide-spread mainly due to the downstream processing of bacterial cultures to extract the PHB. Secretion of PHB from Escherichia coli could reduce downstream processing costs. PHB are non-proteinaceous polymers, hence cannot be directly targeted for secretion. Phasin, PhaP1, is a low molecular weight protein that binds to PHB, reducing PHB granule size. In this study PHB is indirectly secreted with PhaP1 from E. coli via type I secretion using HlyA signal peptides.

RESULTS

This study demonstrated the successful secretion of phasin and phasin bound PHB outside of the cell and into the culture medium. The secretion of PHB was initiated between 24 and 48 h after induction. After 48 h of culturing, 36% of the total PHB produced in the secreting strain was collected in the secreted fraction and 64% remained in the internal fraction. To further support the findings of this study, the PHB secretion phenomenon was observed using SEM.

CONCLUSIONS

From this study, the ability to use type I secretion to: 1) secrete phasin and 2) successfully secrete PHB has been shown.

Secretion of slow-folding proteins by a Type 1 secretion system

Protein production through dedicated secretion systems might offer an potential alternative to the conventional cytoplasmical expression. The application of Type 1 secretion systems of Gram-negative bacteria, however, where often not successful in the past for a wide range of proteins. Recently, two studies using the E. coli maltose binding protein (MalE) and the rat intestinal fatty acid binding protein (IFABP) revealed a rational to circumvent these limitations. Here, wild-type passenger proteins were not secreted, while folding mutants with decreased folding kinetics were efficiently exported to the extracellular space. Subsequently, an one-step purification protocol yielded homogeneous and active protein. Taken together, theses two studies suggest that the introduction of slow-folding mutations into a protein sequence might be the key to use Type 1 secretion systems for the biotechnological production of proteins.

Crystallization and preliminary X-ray crystallographic studies of an oligomeric species of a refolded C39 peptidase-like domain of the Escherichia coli ABC transporter haemolysin B

The ABC transporter haemolysin B (HlyB) from Escherichia coli is part of a type I secretion system that translocates a 110 kDa toxin in one step across both membranes of this Gram-negative bacterium in an ATP-dependent manner. Sequence analysis indicates that HlyB contains a C39 peptidase-like domain at its N-terminus. C39 domains are thiol-dependent peptidases that cleave their substrates after a GG motif. Interestingly, the catalytically invariant cysteine is replaced by a tyrosine in the C39-like domain of HlyB. Here, the overexpression, purification and crystallization of the isolated C39-like domain are described as a first step towards obtaining structural insights into this domain and eventually answering the question concerning the function of a degenerated C39 domain in the ABC transporter HlyB.

The rate of folding dictates substrate secretion by the Escherichia coli hemolysin type 1 secretion system

Secretion of the Escherichia coli toxin hemolysin A (HlyA) is catalyzed by the membrane protein complex HlyB-HlyD-TolC and requires a secretion sequence located within the last 60 amino acids of HlyA. The Hly translocator complex exports a variety of passenger proteins when fused N-terminal to this secretion sequence. However, not all fusions are secreted efficiently. Here, we demonstrate that the maltose binding protein (MalE) lacking its natural export signal and fused to the HlyA secretion signal is poorly secreted by the Hly system. We anticipated that folding kinetics might be limiting secretion, and we therefore introduced the "folding" mutation Y283D. Indeed this mutant fusion protein was secreted at a much higher level. This level was further enhanced by the introduction of a second MalE folding mutation (V8G or A276G). Secretion did not require the molecular chaperone SecB. Folding analysis revealed that all mutations reduced the refolding rate of the substrate, whereas the unfolding rate was unaffected. Thus, the efficiency of secretion by the Hly system is dictated by the folding rate of the substrate. Moreover, we demonstrate that fusion proteins defective in export can be engineered for secretion while still retaining function.

Enhanced secretory production of hemolysin-mediated cyclodextrin glucanotransferase in Escherichia coli by random mutagenesis of the ABC transporter system

The hemolysin transport system was found to mediate the release of cyclodextrin glucanotransferase (CGTase) into the extracellular medium when it was fused to the C-terminal 61 amino acids of HlyA (HlyAs(61)). To produce an improved-secretion variant, the hly components (hlyAs, hlyB and hlyD) were engineered by directed evolution using error-prone PCR. Hly mutants were screened on solid LB-starch plate for halo zone larger than the parent strain. Through screening of about 1 × 10(4) Escherichia coli BL21(DE3) transformants, we succeeded in isolating five mutants that showed a 35-217% increase in the secretion level of CGTase-HlyAs(61) relative to the wild-type strain. The mutation sites of each mutant were located at HlyB, primarily along the transmembrane domain, implying that the corresponding region was important for the improved secretion of the target protein. In this study we describe the finding of novel site(s) of HlyB responsible for enhancing secretion of CGTase in E. coli.

The extraordinary diversity of bacterial protein secretion mechanisms

I have tried to cover the minimal properties of the prolific number of protein secretion systems identified presently, particularly in Gram negative bacteria. New systems, however, are being reported almost by the month and certainly I have missed some. With the accumulating evidence one remains in awe of the complexity of some pathways, with the Type III, IV and VI especially fearsome and impressive. These systems illustrate that protein secretion from bacteria is not only about passage of large polypeptides across a bilayer but also through long tunnels, raising quite different questions concerning mechanisms. The mechanism of transport via the Sec-translocase-translocon is well on the way to full understanding, although a structure of a stuck intermediate would be very helpful. The understanding of the precise details of the mechanism of targeting specificity, and actual polypeptide translocation in other systems is, however, far behind. Groups willing to do the difficult (and risky) work to understand mechanism should therefore be more actively encouraged, perhaps to pursue multidisciplinary, collaborative studies. In writing this review I have become fascinated by the cellular regulatory mechanisms that must be necessary to orchestrate the complex flow of so many polypeptides, targeted by different signals to such a wide variety of transporters. I have tried to raise questions about how this might be managed but much more needs to be done in this area. Clearly, this field is very much alive and the future will be full of revealing and surprising twists in the story.

Towards a human oral vaccine for anthrax: the utility of a Salmonella Typhi Ty21a-based prime-boost immunization strategy

We previously demonstrated the ability of an orally administered attenuated Salmonella enterica serovar Typhimurium strain expressing the protective antigen (PA) of Bacillus anthracis to confer protection against lethal anthrax aerosol spore challenge [Stokes MG, Titball RW, Neeson BN, et al. Oral administration of a Salmonella enterica-based vaccine expressing Bacillus anthracis protective antigen confers protection against aerosolized B. anthracis. Infect Immun 2007;75(April (4)):1827-34]. To extend the utility of this approach to humans we constructed variants of S. enterica serovar Typhi Ty21a, an attenuated typhoid vaccine strain licensed for human use, which expressed and exported PA via two distinct plasmid-based transport systems: the Escherichia coli HlyA haemolysin and the S. Typhi ClyA export apparatus. Murine immunogenicity studies confirmed the ability of these constructs, especially Ty21a expressing the ClyA-PA fusion protein, to stimulate strong PA-specific immune responses following intranasal immunization. These responses were further enhanced by a subsequent boost with either parenterally delivered recombinant PA or the licensed US human alum-adsorbed anthrax vaccine (AVA). Anthrax toxin neutralizing antibody responses using this prime-boost regimen were rapid, vigorous and broad in nature. The results of this study demonstrate the feasibility of employing a mucosal prime with a licensed Salmonella Typhi vaccine strain followed by a parenteral protein boost to stimulate rapid protective immunity against anthrax.

Salmonella Pathogenicity Island 4 encodes a giant non-fimbrial adhesin and the cognate type 1 secretion system

Pathogenicity Islands play a major role in the pathogenesis of infections by Salmonella enterica. The molecular function of Salmonella Pathogenicity Island 4 (SPI4) is largely unknown, but recent work indicated a role of SPI4 for Salmonella pathogenesis in certain animal models. We analysed the virulence functions of SPI4 and observed that SPI4 is contributing to intestinal inflammation in a mouse model. On a cellular level, SPI4 mediates adhesion to epithelial cells. We demonstrate the function of SPI4-encoded proteins as a type I secretion system (T1SS) and identify SiiE as the substrate protein of the T1SS. SiiE is secreted into the culture medium but mediates contact-dependent adhesion to epithelial cell surfaces. SiiE is a very large non-fimbrial adhesin of 600 kDa and consists of 53 repeats of Ig domains. Our study describes the first T1SS-secreted protein that functions as a non-fimbrial adhesin in binding to eukaryotic cells. The SPI4-encoded T1SS and SiiE might functionally resemble the type I fimbrial adhesins.

Probing the in vivo dynamics of type I protein secretion complex association through sensitivity to detergents

The Serratia marcescens hemophore is secreted by a type I secretion system consisting of three proteins: a membrane ABC protein, an adaptor protein, and the TolC-like outer membrane protein. Assembly of these proteins is induced by substrate binding to the ABC protein. Here we show that a hemophore mutant lacking the last 14 C-terminal amino acids is not secreted but rather interacts with the ABC protein and promotes a stable multiprotein complex. Strains expressing the transporter and the mutant protein are sensitive to detergents (sodium dodecyl sulfate [SDS]). TolC is trapped in the transporter jammed by the truncated substrate and therefore is not present at sufficient concentrations to allow the efflux pumps to expel detergents. Using an SDS sensitivity assay, we showed that the hemophore interacts with the ABC protein via two nonoverlapping sites. We also demonstrated that the C-terminal peptide, which functions as an intramolecular signal sequence in the complete substrate, may also have intermolecular activity and triggers complex dissociation in vivo when it is provided as a distinct peptide. The SDS sensitivity test on plates enables workers to study type I secretion protein association and dissociation independent of the secretion process itself.

Delivery of heterologous protein antigens via hemolysin or autotransporter systems by an attenuated ler mutant of rabbit enteropathogenic Escherichia coli

In this report, we describe the use of an attenuated regulatory mutant of a rabbit enteropathogenic Escherichia coli (rEPEC) as a live vaccine vector to deliver heterologous protein antigens using two dedicated transport systems, a Salmonella autotransporter and the E. coli hemolysin apparatus. We previously reported that an isogeneic ler (LEE encoded regulator) mutant of rEPEC O103:H2 is attenuated and immunogenic in rabbits. We first evaluated the Salmonella autotransporter MisL containing the immunodominant B-cell epitope of the circumsporozoite protein from Plasmodium falciparum, (NANP)8, fused to the C-terminal translocator domain under the control of the constitutive Tac17 promoter. The rEPEC ler mutant was able to express and to translocate the (NANP)8 passenger peptide to the bacterial surface. We next investigated the delivery of Shiga toxin B subunit (Stx1B) from human enterohemorrhagic E. coli by the rEPEC ler mutant via the MisL autotransporter or the E. coli hemolysin secretion apparatus. The autotransporter and hemolysin plasmids expressed similar levels of Stx1B (30-40 ng/ml/OD600). Only 6% of Stx1B was found in the autotransporter supernatants; the rest was cell-associated, with a small fraction of the Stx1B surface-exposed as determined by immunofluorescence. In contrast, 88% of Stx1B was secreted into culture supernatants by the hemolysin secretion system. In an in vivo study, no significant protection was observed in rabbits inoculated with the ler mutant harboring the Stx1B-autotransporter plasmid following experimental challenge with RDEC-H19A, the prototype rEPEC containing an Stx-converting phage. In contrast, rabbits inoculated with the rEPEC ler mutant containing the Stx1B-hemolysin fusion were partially protected from RDEC-H19A infection as demonstrated by decreased weight loss (p<0.008) when compared to rabbits inoculated with the parent ler mutant. Our results suggest that attenuated rEPEC are capable of serving as vaccine vectors to express heterologous protein antigens from different cellular locations and deliver these antigens to the intestinal mucosa. With this system, secreted proteins may be more effective than cell-associated antigens in generating protection.

Gram-negative bacterial ATP-binding cassette protein exporter family and diverse secretory proteins

Protein translocation to the extracellular space is essential for the invasion, colonization, and survival of pathogenic gram-negative bacteria within a host organism. In addition to the N-terminal signal sequence-dependent secretion system, which is specific for protein transport to the periplasmic space, there are five major systems (type I, II, III, IV, and V) that are known to be involved in protein secretion into the extracellular space. Of the systems, the type I pathway, which is composed of three membrane components including an ATP-binding cassette (ABC) protein, translocates proteins into the extracellular space from the cytosol by directly using the energy generated from ATP hydrolysis, and therefore, the system is a member of the ABC transporter family and is also known as the ABC exporter. To date, ABC exporters have been discovered to be involved in the secretion of a wide variety of exoproteins including RTX (repeats-in-toxin) toxins, cell surface layer proteins, proteases, lipases, bacteriocins, heme-acquisition proteins, and nodulation-related proteins such as the exoglucanases of gram-negative bacteria. A secretory protein and its associated specific ABC exporter are encoded in the same gene cluster in most cases, and ABC exporters show substrate specificity for secretion. Consequently, ABC exporters are present based primarily on the number of secretory protein genes. A secretion signal is situated in the C-terminal region of secretory proteins, however, the characteristics of the secretion signal are not fully understood. Secretory substrates and their linked ABC exporters are reviewed in the following paper.

Recombinant protein secretion in Escherichia coli

The secretory production of recombinant proteins by the Gram-negative bacterium Escherichia coli has several advantages over intracellular production as inclusion bodies. In most cases, targeting protein to the periplasmic space or to the culture medium facilitates downstream processing, folding, and in vivo stability, enabling the production of soluble and biologically active proteins at a reduced process cost. This review presents several strategies that can be used for recombinant protein secretion in E. coli and discusses their advantages and limitations depending on the characteristics of the target protein to be produced.

Comparison of S-layer secretion genes in freshwater caulobacters

Our freshwater caulobacter collection contains about 40 strains that are morphologically similar to Caulobacter crescentus. All elaborate a crystalline protein surface (S) layer made up of protein monomers 100-193 kDa in size. We conducted a comparative study of S-layer secretion in 6 strains representing 3 size groups of S-layer proteins: small (100-108 kDa), medium (122-151 kDa), and large (181-193 kDa). All contained genes predicted to encode ATP-binding cassette transporters and membrane fusion proteins highly similar to those of C. crescentus, indicating that the S-layer proteins were all secreted by a type I system. The S-layer proteins' C-termini showed unexpectedly low sequence similarity but contained conserved residues and predicted secondary structure features typical of type I secretion signals. Cross-expression studies showed that the 6 strains recognized secretion signals from C. crescentus and Pseudomonas aeruginosa and similarly that C. crescentus was able to secrete the S-layer protein C-terminus of 1 strain examined. Inactivation of the ATP-binding cassette transporter abolished S-layer protein secretion, indicating that the type I transporter is necessary for S-layer protein secretion. Finally, while all of the S-layer proteins of this subset of strains were secreted by type I mechanisms, there were significant differences in genome positions of the transporter genes that correlated with S-layer protein size.

A specific interaction between the NBD of the ABC-transporter HlyB and a C-terminal fragment of its transport substrate haemolysin A

A member of the family of RTX toxins, Escherichia coli haemolysin A, is secreted from Gram-negative bacteria. It carries a C-terminal secretion signal of approximately 50 residues, targeting the protein to the secretion or translocation complex, in which the ABC-transporter HlyB is a central element. We have purified the nucleotide-binding domain of HlyB (HlyB-NBD) and a C-terminal 23kDa fragment of HlyA plus the His-tag (HlyA1), which contains the secretion sequence. Employing surface plasmon resonance, we were able to demonstrate that the HlyB-NBD and HlyA1 interact with a K(D) of approximately 4 microM. No interaction was detected between the HlyA fragment and unrelated NBDs, OpuAA, involved in import of osmoprotectants, and human TAP1-NBD, involved in the export of antigenic peptides. Moreover, a truncated version of HlyA1, lacking the secretion signal, failed to interact with the HlyB-NBD. In addition, we showed that ATP accelerated the dissociation of the HlyB-NBD/HlyA1 complex. Taking these results together, we propose a model for an early stage of initiation of secretion in vivo, in which the NBD of HlyB, specifically recognizes the C terminus of the transport substrate, HlyA, and where secretion is initiated by subsequent displacement of HlyA from HlyB by ATP.

A combinatorial approach toward analyzing functional elements of the Escherichia coli hemolysin signal sequence

Secretion of hemolysin is directed by a signal sequence located within its C-terminal 60 amino acids. Deletion analyses have indicated that the extreme end of this C-terminus is critical for transport; however, it is not known if this region contains structural features necessary for function. In this study, we have used a combinatorial approach to generate two contiguous 8-residue random libraries (Cterm1 and Cterm2) in the signal sequence to investigate the functional specificity of the last 16 residues. The large number of variants generated had provided us with a rich data set to determine if a restricted subset of sequences was actually required for function in the extreme C-terminus. We observed that over 90% of the random sequences in the Cterm1 region were secreted at close to wild-type level, while the Cterm2 region was more restricted with only 50% of the random sequences supporting wild-type-like transport. It appeared that, in the Cterm2 region, the relative lack of positive charge is favored for function. These findings, along with previous results, allow us to propose a model for recognition and transport of hemolysin that emphasizes secondary structure and general biophysical properties over primary sequence. This model may have implications for understanding the broad substrate specificity common among ATP-binding cassette transporters.

Identification of immunogenic antigens of Helicobacter pylori via the Escherichia coli hemolysin secretion system(1)

We describe a new procedure allowing the generation and detection of immunogenic antigens from Helicobacter pylori via the hemolysin secretion apparatus of Escherichia coli. The gene (or gene fragment) encoding the H. pylori protein (or protein domain) is inserted in-frame into a residual portion of the hemolysin gene (hlyA), encoding the HlyA secretion signal (HlyA(s)). These fusion proteins are secreted efficiently by E. coli. This new approach allows the identification of immunodominant antigens by using sera derived from H. pylori-infected patients suffering from different gastroduodenal pathologies. Three immunodominant antigens bearing the ureB (urease B-subunit), flaA (flagellin A-subunit), and an unknown ORF (HP0888) encoding an E. coli FecE analogous protein fused to hlyA(s) were identified and characterized.

Combinatorial analysis of the structural requirements of the Escherichia coli hemolysin signal sequence

We have investigated the substrate specificity of the Escherichia coli hemolysin transporter system. Translocation of hemolysin is dependent on a C-terminal signal sequence located within the last 60 amino acids of this protein. Previous comparative studies of the signal sequence have revealed a conserved helix(alpha1)-linker-helix(alpha2) motif, suggesting that secondary structure is important for transport. In this study, we generated three random libraries in the alpha1, linker, and alpha2 regions, as well as an alpha1-amphiphilic helical library to identify features buried within the structural motif that contribute to transport. Combinatorial variants were generated by altering the primary sequence of specific regions, and correlation between the genotype and phenotype of the mutant populations allowed us to objectively identify any functional features involved. It was found that the alpha1-amphiphilic helix and the linker are both important for function. To our surprise, the second helix of the conserved structural motif was not essential for transport. The finding that a predicted amphiphilic helix and hydrophobicity, rather than primary sequence, contribute to transport in the alpha1 region allows us to speculate on the mechanism of multiple substrate recognition. This may have implications for understanding the broad substrate specificity common among other ATP-binding cassette transporters.

E. coli alpha-hemolysin: a membrane-active protein toxin

alpha-Hemolysin is synthesized as a 1024-amino acid polypeptide, then intracellularly activated by specific fatty acylation. A second activation step takes place in the extracellular medium through binding of Ca2+ ions. Even in the absence of fatty acids and Ca2+ HlyA is an amphipathic protein, with a tendency to self-aggregation. However, Ca(2+)-binding appears to expose hydrophobic patches on the protein surface, facilitating both self-aggregation and irreversible insertion into membranes. The protein may somehow bind membranes in the absence of divalent cations, but only when Ca2+ (or Sr2+, or Ba2+) is bound to the toxin in aqueous suspensions, i.e., prior to its interaction with bilayers, can alpha-hemolysin bind irreversibly model or cell membranes in such a way that the integrity of the membrane barrier is lost, and cell or vesicle leakage ensues. Leakage is not due to the formation of proteinaceous pores, but rather to the transient disruption of the bilayer, due to the protein insertion into the outer membrane monolayer, and subsequent perturbations in the bilayer lateral tension. Protein or glycoprotein receptors for alpha-hemolysin may exist on the cell surface, but the toxin is also active on pure lipid bilayers.

Delivery of the p67 sporozoite antigen of Theileria parva by using recombinant Salmonella dublin: secretion of the product enhances specific antibody responses in cattle

The p67 sporozoite antigen of Theileria parva has been fused to the C-terminal secretion signal of Escherichia coli hemolysin and expressed in secreted form by attenuated Salmonella dublin aroA strain SL5631. The recombinant p67 antigen was detected in the supernatant of transformed bacterial cultures. Immunization trials in cattle revealed that SL5631 secreting the antigen provoked a 10-fold-higher antibody response to p67 than recombinant SL5631 expressing but not secreting p67. Immunized calves were challenged with a 80% lethal dose of T. parva sporozoites and monitored for the development of infection. Two of three calves immunized intramuscularly with the p67-secreting SL5631 strain were found to be protected, whereas only one of three animals immunized with the nonsecreting p67-expressing SL5631 strain was protected. This is the first demonstration that complete eukaryotic antigens fused to the C-terminal portion of E. coli hemolysin can be exported from attenuated Salmonella strains and that such exported antigens can protect cattle against subsequent parasite challenge.

Secretion of proteins and assembly of bacterial surface organelles: shared pathways of extracellular protein targeting

Extracellular or surface localization of virulence determinants is an important attribute of pathogenic microorganisms. The past decade has seen significant research advances in defining the steps and identifying the necessary machinery for protein secretion from bacterial cells. In Gram-negative pathogens, four distinct classes of secretion pathways have been identified that deliver virulence factors to their sites of action. These pathways are responsible for the delivery of soluble extracellular enzymes into the surrounding medium, or for specifically targeting proteins to the host cell. In several instances protein secretion pathways are similar to those involved in assembly of bacterial appendages. Combination of biochemical and genetic analyses has recently revealed that the pathways of protein secretion and surface localization of various organelles are mechanistically similar which was not apparent simply by comparing amino acid sequences of related proteins. The choice of the pathway that a protein will utilize may not be dictated only by the specific requirement of the secreted protein to traverse the cell envelope in the functional form, but also by the need to assure its delivery to the correct site of action outside the bacterial cell.

Protective immunity against Clostridium difficile toxin A induced by oral immunization with a live, attenuated Vibrio cholerae vector strain

Clostridium difficile causes pseudomembranous colitis through the action of Rho-modifying proteins, toxins A and B. Antibodies directed against C. difficile toxin A prevent or limit C. difficile-induced colitis. We engineered plasmid pETR14, containing the hlyB and hlyD genes of the Escherichia coli hemolysin operon, to express a fusion protein containing 720 amino acid residues from the nontoxic, receptor-binding, carboxy terminus of C. difficile toxin A and the secretion signal of E. coli hemolysin A. We introduced pETR14 into Vibrio cholerae and found that the toxin A-HlyA fusion protein was secreted by a number of V. cholerae strains and recognized by both monoclonal and polyclonal anti-C. difficile toxin A antibodies. We introduced pETR14 into an attenuated V. cholerae strain, O395-NT, and inoculated rabbits orally with this construct. Colonization studies disclosed that the V. cholerae vector containing pETR14 was recoverable from rabbit ilea up to 5 days after oral inoculation. Vaccination produced significant systemic anti-C. difficile toxin A immunoglobulin G and anti-V. cholerae vibriocidal antibody responses. Vaccination also produced significant protection against toxin A in an ileal loop challenge assay, as assessed by determination of both fluid secretion and histological changes. These results suggest that the hemolysin system of E. coli can be used successfully in V. cholerae vector strains to effect secretion of large heterologous antigens and that a V. cholerae vector strain secreting a nontoxic, immunogenic portion of C. difficile toxin A fused to the secretion signal of E. coli HlyA induces protective systemic and mucosal immunity against this toxin.

Strategies for achieving high-level expression of genes in Escherichia coli

Progress in our understanding of several biological processes promises to broaden the usefulness of Escherichia coli as a tool for gene expression. There is an expanding choice of tightly regulated prokaryotic promoters suitable for achieving high-level gene expression. New host strains facilitate the formation of disulfide bonds in the reducing environment of the cytoplasm and offer higher protein yields by minimizing proteolytic degradation. Insights into the process of protein translocation across the bacterial membranes may eventually make it possible to achieve robust secretion of specific proteins into the culture medium. Studies involving molecular chaperones have shown that in specific cases, chaperones can be very effective for improved protein folding, solubility, and membrane transport. Negative results derived from such studies are also instructive in formulating different strategies. The remarkable increase in the availability of fusion partners offers a wide range of tools for improved protein folding, solubility, protection from proteases, yield, and secretion into the culture medium, as well as for detection and purification of recombinant proteins. Codon usage is known to present a potential impediment to high-level gene expression in E. coli. Although we still do not understand all the rules governing this phenomenon, it is apparent that "rare" codons, depending on their frequency and context, can have an adverse effect on protein levels. Usually, this problem can be alleviated by modification of the relevant codons or by coexpression of the cognate tRNA genes. Finally, the elucidation of specific determinants of protein degradation, a plethora of protease-deficient host strains, and methods to stabilize proteins afford new strategies to minimize proteolytic susceptibility of recombinant proteins in E. coli.

An Escherichia coli hemolysin transport system-based vector for the export of polypeptides: export of Shiga-like toxin IIeB subunit by Salmonella typhimurium aroA

The export of Escherichia coli hemolysin across the cytoplasmic and the outer membranes requires the COOH-terminal signal sequence of HlyA, the two specific translocator proteins HlyB and HlyD, and the outer membrane protein TolC. We have developed an export cloning system that is composed of two vectors: one in which the fusion of the desired gene with the 3'-end of hlyA is generated, and a second in which the sequences containing the fusion are combined with the accessory genes hlyB and hlyD, thereby reconstructing the natural organization of the hly locus. In the second vector the fusion and the accessory genes are flanked by Notl sites, allowing subcloning of the whole cluster into a variety of minitransposons to achieve the stable integration of the constructs into the chromosome of Gram-negative bacteria. Since some applications may require the production of transcriptional fusions, an alternative version of the system provides the efficient translation initiation region of T7 phage gene 10 upstream of the fusion protein coding sequence. The usefulness of the system was assessed by constructing a fusion between the gene encoding the B subunit of Shiga-like toxin lle and the 3'-end of hlyA. An attenuated Salmonella typhimurium vaccine strain harboring the resulting construct, either in multicopy or monocopy, efficiently expressed and exported the chimeric protein. We anticipate that this system will lead to a higher stability of the engineered function and permit a faithful monitoring of the export of the recombinant peptide under physiologic single-copy conditions.

Bacteriocin release proteins: mode of action, structure, and biotechnological application

The mechanism by which Gram-negative bacteria like Escherichia coli secrete bacteriocins into the culture medium is unique and quite different from the mechanism by which other proteins are translocated across the two bacterial membranes, namely through the known branches of the general secretory pathway. The release of bacteriocins requires the expression and activity of a so-called bacteriocin release protein and the presence of the detergent-resistant phospholipase A in the outer membrane. The bacteriocin release proteins are highly expressed small lipoproteins which are synthesized with a signal peptide that remains stable and which accumulates in the cytoplasmic membrane after cleavage. The combined action of these stable, accumulated signal peptides, the lipid-modified mature bacteriocin release proteins (BRPs) and phospholipase A cause the release of bacteriocins. The structure and mode of action of these BRPs as well as their application in the release of heterologous proteins by E. coli is described in this review.

Secretion of active beta-lactamase to the medium mediated by the Escherichia coli haemolysin transport pathway

An in frame gene fusion containing the coding region for mature beta-lactamase and the 3'-end of hylA encoding the haemolysin secretion signal, was constructed under the control of a lac promoter. The resulting 53 kDa hybrid protein was specifically secreted to the external medium in the presence of the haemolysin translocator proteins, HlyB and HlyD. The specific activity of the beta-lactamase portion of the secreted protein (measured by the hydrolysis of penicillin G), approximately 1 U/microgram protein, was close to that of authentic, purified TEM-beta-lactamase. This is an important example of a hybrid protein that is enzymatically active, and secreted via the haemolysin pathway. Previous studies have indicated that haemolysin is secreted directly into the medium, bypassing the periplasm, to which beta-lactamase is normally targeted. This study indicated, therefore, that normal folding of an active beta-lactamase, can occur, at least when fused to the HlyA C-terminus, without the necessity of entering the periplasm. Despite the secretion of approximately 5 micrograms/ml levels of the active beta-lactamase fusion into the medium, there was maximally only a 50% detectable increase in the LD50 for resistance to ampicillin at the individual cell level. This result suggests that, normally, resistance to ampicillin requires a high concentration of the enzyme close to killing targets, i.e. in the periplasm, in order to achieve significant levels of protection.

The intracellular domain of the rabbit prolactin receptor is able to promote the secretion of a passenger protein via an unusual secretory pathway in lepidopteran cells

We have previously shown that the intracellular domain of the rabbit prolactin receptor (rbPRL-R), lacking typical signal sequences, was very efficiently secreted into the culture medium when expressed in the baculovirus-insect cell system. We have sought to take advantage of this characteristic for secreting cytoplasmic or nuclear proteins. We have constructed a series of recombinant viruses expressing a foreign gene product fused to the intracellular domain of rbPRL-R. Two passenger genes were used, one encoding a cytoplasmic protein (cyclin B) and the other a nuclear protein (cyclin A). The intracellular domain of rbPRL-R was able to promote the export of these two chimeric proteins with a very high efficiency. This new system should prove useful for secretion of proteins which do not require the post-translational modifications of the classical secretory pathway to be fully active.

Salmonella strain secreting active listeriolysin changes its intracellular localization

We describe the construction of an attenuated Salmonella dublin aroA strain which secretes via the Escherichia coli hemolysin secretion machinery an active hybrid cytolysin consisting of listeriolysin from Listeria monocytogenes and the C-terminal secretion signal of E. coli hemolysin. This hemolytic S. dublin strain is partially released into the cytoplasm of the host cell following uptake by J774 macrophage cells, whereas the nonhemolytic control S. dublin aroA strain remains in the phagosome.

Secretion of streptokinase fusion proteins from Escherichia coli cells through the hemolysin transporter

The hemolysin (HlyA) secretion system was used to achieve the sec-independent secretion of streptokinase (Skc) originating from Streptococcus equisimilis into the medium by Escherichia coli cells. The in-frame fusions of the skc gene, either possessing or lacking a region encoding the signal peptide (SP) with the 3'-end of the hlyA gene of various lengths were analysed. All hybrids retained Skc activity. Hybrid proteins devoided of the N-terminal SP, regardless of length of the hlyA secretion signal (62 vs. 194 amino acids), were secreted into the medium by the E. coli HlyA transporter at similar levels. Considerable amounts of hybrid proteins were still, however, associated with E. coli cells, mainly in the degraded form.