Cementum engineering with three-dimensional polymer scaffolds

Biological processes and factors involved in soft and hard tissue healing

Wound healing is a complex and iterative process involving myriad cellular and biologic processes that are highly regulated to allow satisfactory repair and regeneration of damaged tissues. This review is intended to be an introductory chapter in a volume focusing on the use of platelet concentrates for tissue regeneration. In order to fully appreciate the clinical utility of these preparations, a sound understanding of the processes and factors involved in soft and hard tissue healing. This encompasses an appreciation of the cellular and biological mediators of both soft and hard tissues in general as well as specific consideration of the periodontal tissues. In light of good advances in this basic knowledge, there have been improvements in clinical strategies and therapeutic management of wound repair and regeneration. The use of platelet concentrates for tissue regeneration offers one such strategy and is based on the principles of cellular and biologic principles of wound repair discussed in this review.

The long non-coding RNA, miRNA and mRNA landscapes of cementoblasts during cementogenesis

OBJECTIVE

Stimulation of cementogenesis is essential to cementum regeneration and root restoration. Long non-coding RNAs (lncRNAs) participate in the regulatory networks of periodontal regeneration processes. We identified and analysed differentially expressed lncRNAs, miRNAs and mRNAs associated with cementogenic differentiation of cementoblasts.

MATERIALS AND METHODS

OCCM-30 immortalized mouse cementoblast cells were induced in cementogenic medium for 7 and 14 days. Total RNA was extracted and subjected to RNA sequencing to screen for differentially expressed lncRNAs, miRNAs and mRNAs. Quantitative reverse-transcription polymerase chain reaction (qRT-PCR) was performed to determine the expression levels of RNAs. Gene Ontology (GO) term and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses were used to clarify the potential functions of differentially expressed genes in biological processes and pathways. lncRNA-miRNA-mRNA networks were constructed based on correlation and algorithmic analyses.

RESULTS

In all, 461 lncRNAs, 89 miRNAs and 2157 mRNAs showed differential expression in OCCM-30 cells after cementoblast differentiation. At day 7, upregulation of 248 lncRNAs, 30 miRNAs and 905 mRNAs was observed, along with downregulation of 127 lncRNAs, 34 miRNAs and 960 mRNAs. At day 14, 197 lncRNAs, 13 miRNAs and 847 mRNAs were upregulated, while 74 lncRNAs, 12 miRNAs and 760 mRNAs were downregulated. The results of qRT-PCR showed that four candidate lncRNAs, H19, Gdap10, Foxo6os and Ipw, were significantly upregulated after 7 and 14 days of cementogenic induction. The lncRNA-miRNA-mRNA network illustrated a possible competitive endogenous RNA regulatory mechanism. GO analysis showed that consistently differentially expressed mRNAs were involved in blood vessel morphogenesis, cell-substrate adhesion, cell adhesion, ossification and extracellular matrix organization. KEGG analysis indicated that extracellular matrix-receptor interaction, focal adhesion, and the PI3K-Akt, Rap1, mitogen-activated protein kinase, and Ras signalling pathways varied significantly during cementogenesis.

CONCLUSION

The expressions of lncRNA, miRNA and mRNA were significantly altered in cementoblasts after cementogenesis. This study highlighted the effect of lncRNAs in the process of cementogenesis and revealed their potential for the discovery of novel biomarkers and therapeutic targets for cementum regeneration.

A conceptual review on reconstructive peri-implantitis therapy: Challenges and opportunities

OBJECTIVES

The current strategies to reconstruct lost peri-implant tissues due to the disease have been largely unpredictable. The aim of this conceptual review is to discuss relevant biological and biomechanical challenges of applying reconstructive means to treat peri-implantitis. Additionally, opportunities to improve treatment predictability are presented.

MATERIAL AND METHODS

A narrative review was conducted to fulfill the aim.

RESULTS

The four interrelated negative conditions hampering effective reconstruction are: inferior tissue perfusion, unfavorable bone topography, ineffective surface treatment, and unstable wound. First, peri-implant tissues resemble scars with reduced cellularity and vascularity, coupled with the absence of the periodontal ligament plexuses and the avascular implant and biomaterials, maintaining primary closure is a challenge, which is critical for regeneration. Second, defect morphology and bone topography surrounding implants determine the reconstructive potential. Unfortunately, noncontained defects are frequently encountered, with a combination of suprabony (horizontal bone loss) and infrabony (vertical usually involving circumferential bone loss) defects. Third, current attempts for implant surface decontamination are insufficient due to inaccessible macrostructure and rough surfaces in the micro-scale. Histologic evaluation has shown bacteria aggregation and calcified deposits around implants. Lastly, wound stability is difficult to achieve due to inherent soft tissue biomechanical quality and quantity deficiencies and mobile bone particulates. Opportunities to tackle the abovementioned challenges include the use of novel imaging technologies, such as high-frequency dental ultrasound and laser speckle imaging to evaluate tissue perfusion, soft tissue quality/quantity, and bone topography pre-surgically. The use of the operating microscope could allow better visualization and removal of etiologic factors. Strategies to improve soft tissue quality may include preoperative control of soft tissue inflammation and the potential use of biologics. Methods such as fixation to stabilize the biomaterials could be beneficial.

CONCLUSIONS

A more nuanced understanding of the current challenges and opportunities can lead to more effective preoperative and postoperative care protocols, ultimately improving the success rate of reconstructive procedures.

Hard Dental Tissues Regeneration-Approaches and Challenges

With the development of the modern concept of tissue engineering approach and the discovery of the potential of stem cells in dentistry, the regeneration of hard dental tissues has become a reality and a priority of modern dentistry. The present review reports the recent advances on stem-cell based regeneration strategies for hard dental tissues and analyze the feasibility of stem cells and of growth factors in scaffolds-based or scaffold-free approaches in inducing the regeneration of either the whole tooth or only of its component structures.

Evaluation of Osteogenic/Cementogenic Modulating Potential of PAI-1 Transfected Media for Stem Cells

AIM OF THE STUDY

In vitro evaluation of the effects of plasminogen activator inhibitor-1 (PAI-1) transfected-conditioned media (P-CM) on the differentiation of human periodontal ligament stem cells (hPDLSCs) and human periapical follicular stem cells (hPAFSCs).

MATERIALS AND METHODS

The hPDLSCs and hPAFSCs received from impacted third molars were treated with P-CM and viability, as well as differentiation of the cells were evaluated. Plasmids were constructed according to standard techniques, and all sequences were validated by proper enzyme digestion and sequencing. Chinese hamster ovarian (CHO) cells were transfected with pcDNA3.1-hPAI-1 plasmid to obtain P-CM, followed by western blotting and PAI-1-specific ELISA kit to evaluate the proteins of P-CM. The cell viability of hPDLSCs and hPAFSCs were analyzed using MTT assay after 48 h of incubation. Alizarin red S staining was performed to evaluate the differentiation of hPDLSCs and hPAFSCs. The reverse transcription-polymerase chain reaction was used to observe the expression levels of osteogenic/cementogenic marker genes. The human cytokine antibody array was applied for further analysis of cytokine expression in P-CM.

RESULTS

P-CM significantly promoted the differentiation of hPDLSCs and hPAFSCs and upregulated the expression of osteogenic/cementogenic marker genes in vitro. Furthermore, rhPAI-1 promoted mineralized nodules formation of hPDLSCs and hPAFSCs, and we identified that other proteins, RANTES and IL-6, were highly expressed in P-CM.

CONCLUSIONS

P-CM promoted the differentiation of hPDLSCs and hPAFSCs by upregulating the expression of RANTES and IL-6, and interaction between PAI-1 and RANTES/IL-6 signaling may be involved in P-CM-induced osteogenic/cementogenic differentiation.

Biomaterial-Based Approaches for Regeneration of Periodontal Ligament and Cementum Using 3D Platforms

Currently, various tissue engineering strategies have been developed for multiple tissue regeneration and integrative structure formations as well as single tissue formation in musculoskeletal complexes. In particular, the regeneration of periodontal tissues or tooth-supportive structures is still challenging to spatiotemporally compartmentalize PCL (poly-ε-caprolactone)-cementum constructs with micron-scaled interfaces, integrative tissue (or cementum) formations with optimal dimensions along the tooth-root surfaces, and specific orientations of engineered periodontal ligaments (PDLs). Here, we discuss current advanced approaches to spatiotemporally control PDL orientations with specific angulations and to regenerate cementum layers on the tooth-root surfaces with Sharpey's fiber anchorages for state-of-the-art periodontal tissue engineering.

Bioreactors Design, Types, Influencing Factors and Potential Application in Dentistry. A Literature Review

Objectives:

A variety of bioreactors and related approaches have been applied to dental tissues as their use has become more essential in the field of regenerative dentistry and dental tissue engineering. The review discusses the various types of bioreactors and their potential application in dentistry.

Methods:

Review of the literature was conducted using keywords (and MeSH) like Bioreactor, Regenerative Dentistry, Fourth Factor, Stem Cells, etc., from the journals published in English. All the searched abstracts, published in indexed journals were read and reviewed to further refine the list of included articles. Based on the relevance of abstracts pertaining to the manuscript, full-text articles were assessed.

Results:

Bioreactors provide a prerequisite platform to create, test, and validate the biomaterials and techniques proposed for dental tissue regeneration. Flow perfusion, rotational, spinner-flask, strain and customize-combined bioreactors have been applied for the regeneration of bone, periodontal ligament, gingiva, cementum, oral mucosa, temporomandibular joint and vascular tissues. Customized bioreactors can support cellular/biofilm growth as well as apply cyclic loading. Center of disease control & dip-flow biofilm-reactors and micro-bioreactor have been used to evaluate the biological properties of dental biomaterials, their performance assessment and interaction with biofilms. Few case reports have also applied the concept of in vivo bioreactor for the repair of musculoskeletal defects and used customdesigned bioreactor (Aastrom) to repair the defects of cleft-palate.

Conclusions:

Bioreactors provide a sterile simulated environment to support cellular differentiation for oro-dental regenerative applications. Also, bioreactors like, customized bioreactors for cyclic loading, biofilm reactors (CDC & drip-flow), and micro-bioreactor, can assess biological responses of dental biomaterials by simultaneously supporting cellular or biofilm growth and application of cyclic stresses.

Evaluation and comparison of hydroxyapatite crystals with collagen fibrils bone graft alone and in combination with guided tissue regeneration membrane

BACKGROUND

The combination of collagen in bone grafts is being used because of its properties that accentuate the degree of regeneration. Furcation involvement poses challenge to the prognosis of a tooth, the use of bone grafts and a combination of grafts and membranes have proved to be beneficial in the treatment of furcation defects. Thus, the aim of the present study was to clinically evaluate and compare the effectiveness of collagen fiber bone graft with and without a membrane in the treatment of mandibular Grade II furcation defects.

MATERIALS AND METHODS

A clinical split-mouth randomized control trial, which included ten patients having bilateral mandibular Grade II furcation defects, was randomly assigned to Group I, treated with bone graft of hydroxyapatite with collagen fibers, and Group II, treated with bone graft of hydroxyapatite with collagen fibers and guided tissue regeneration membrane of polyglycolide and polylactide copolymer, respectively. The clinical measurements were recorded at baseline and 6 months after surgery; and plaque and gingival index were recorded at baseline and at 3 and 6 months after surgery. The data obtained was statistically evaluated.

RESULTS

The overall results showed that the treatment procedures demonstrated statistically significant reduction in probing pocket depth, vertical defect fill, and horizontal depth of furcation, with a gain in clinical attachment level. On comparison of both the groups, Group II showed superior results with a statistically significant difference in all parameters except in gingival recession.

CONCLUSION

The findings of the study demonstrated superior clinical results obtained with hydroxyapatite with collagen fibers, used in combination with polyglycolide and polylactide copolymer as compared to used alone in the treatment of Grade II furcation defects.

Overlapping functions of bone sialoprotein and pyrophosphate regulators in directing cementogenesis

Although acellular cementum is essential for tooth attachment, factors directing its development and regeneration remain poorly understood. Inorganic pyrophosphate (PP_i), a mineralization inhibitor, is a key regulator of cementum formation: tissue-nonspecific alkaline phosphatase (Alpl/TNAP) null mice (increased PP_i) feature deficient cementum, while progressive ankylosis protein (Ank/ANK) null mice (decreased PP_i) feature increased cementum. Bone sialoprotein (Bsp/BSP) and osteopontin (Spp1/OPN) are multifunctional extracellular matrix components of cementum proposed to have direct and indirect effects on cell activities and mineralization. Studies on dentoalveolar development of Bsp knockout (Bsp^-/-) mice revealed severely reduced acellular cementum, however underlying mechanisms remain unclear. The similarity in defective cementum phenotypes between Bsp^-/- mice and Alpl^-/- mice (the latter featuring elevated PP_i and OPN), prompted us to examine whether BSP is operating by modulating PP_i-associated genes. Genetic ablation of Bsp caused a 2-fold increase in circulating PP_i, altered mRNA expression of Alpl, Spp1, and Ank, and increased OPN protein in the periodontia. Generation of a Bsp knock-out (KO) cementoblast cell line revealed significantly decreased mineralization capacity, 50% increased PP_i in culture media, and increased Spp1 and Ank mRNA expression. While addition of 2μg/ml recombinant BSP altered Spp1, Ank, and Enpp1 expression in cementoblasts, changes resulting from this dose were not dependent on the integrin-binding RGD motif or MAPK/ERK signaling pathway. Decreasing PP_i by genetic ablation of Ank on the Bsp^-/- mouse background reestablished cementum formation, allowing >3-fold increased acellular cementum volume compared to wild-type (WT). However, deleting Ank did not fully compensate for the absence of BSP. Bsp^-/-; Ank^-/- double-deficient mice exhibited mean 20-27% reduced cementum thickness and volume compared to Ank^-/- mice. From these data, we conclude that the perturbations in PP_i metabolism are not solely driving the cementum pathology in Bsp^-/- mice, and that PP_i is more potent than BSP as a cementum regulator, as shown by the ability to override loss of BSP by lowering PP_i. We propose that BSP and PP_i work in concert to direct mineralization in cementum and likely other mineralized tissues.

Adhesion of human periodontal ligament cells by three-dimensional culture to the sterilized root surface of extracted human teeth

Residual periodontal ligament (PDL) and cement mass on the roots of extracted teeth are factors that considerably affect tooth transplantation. Therefore, when normal extracted teeth are used for autologous transplantation, it is necessary to regenerate the PDL of the root surface. Here we describe a method to examine human PDL cell adhesion on sterilized root surfaces. Sample teeth were extracted during orthodontic treatment. PDL cells were obtained from healthy periodontal tissue explants from teeth extracted for orthodontic reasons. We developed a method for adhering PDL cells to sterile root surfaces using three-dimensional culture for 3 weeks. We evaluated the adhesion of human PDL cells to the sterilized root surfaces biochemically and histologically. The adherent PDL cells presented new projections on the sterile root surfaces. Therefore, PDL cells can adhere to sterile root surfaces.

Tissue engineering: Dentin - pulp complex regeneration approaches (A review)

Dental pulp is a highly specialized tissue that preserves teeth. It is important to maintain the capabilities of dental pulp before a pulpectomy by creating a local restoration of the dentin-pulp complex from residual dental pulp. The articles identified were selected by two reviewers based on entry and exit criteria. All relevant articles indexed in PubMed, Springer, Science Direct, and Scopus with no limitations from 1961 to 2016 were searched. Factors investigated in the selected articles included the following key words: Dentin-Pulp Complex, Regeneration, Tissue Engineering, Scaffold, Stem Cell, and Growth Factors. Of the 233 abstracts retrieved, the papers which were selected had evaluated the clinical aspects of the application of dentin-pulp regeneration. Generally, this study has introduced a new approach to provoke the regeneration of the dentin-pulp complex after a pulpectomy, so that exogenous growth factors and the scaffold are able to induce cells and blood vessels from the residual dental pulp in the tooth root canal. This study further presents a new strategy for local regeneration therapy of the dentin-pulp complex. This review summarizes the current knowledge of the potential beneficial effects derived from the interaction of dental materials with the dentin-pulp complex as well as potential future developments in this exciting field.

Poly(Lactic-co-Glycolic Acid): Applications and Future Prospects for Periodontal Tissue Regeneration

Periodontal tissue regeneration is the ultimate goal of the treatment for periodontitis-affected teeth. The success of regenerative modalities relies heavily on the utilization of appropriate biomaterials with specific properties. Poly (lactic-co-glycolic acid) (PLGA), a synthetic aliphatic polyester, has been actively investigated for periodontal therapy due to its favorable mechanical properties, tunable degradation rates, and high biocompatibility. Despite the attractive characteristics, certain constraints associated with PLGA, in terms of its hydrophobicity and limited bioactivity, have led to the introduction of modification strategies that aimed to improve the biological performance of the polymer. Here, we summarize the features of the polymer and update views on progress of its applications as barrier membranes, bone grafts, and drug delivery carriers, which indicate that PLGA can be a good candidate material in the field of periodontal regenerative medicine.

Advanced biomatrix designs for regenerative therapy of periodontal tissues

Periodontitis is an inflammatory disease that causes loss of the tooth-supporting apparatus, including periodontal ligament, cementum, and alveolar bone. A broad range of treatment options is currently available to restore the structure and function of the periodontal tissues. A regenerative approach, among others, is now considered the most promising paradigm for this purpose, harnessing the unique properties of stem cells. How to make full use of the body's innate regenerative capacity is thus a key issue. While stem cells and bioactive factors are essential components in the regenerative processes, matrices play pivotal roles in recapitulating stem cell functions and potentiating therapeutic actions of bioactive molecules. Moreover, the positions of appropriate bioactive matrices relative to the injury site may stimulate the innate regenerative stem cell populations, removing the need to deliver cells that have been manipulated outside of the body. In this topical review, we update views on advanced designs of biomatrices-including mimicking of the native extracellular matrix, providing mechanical stimulation, activating cell-driven matrices, and delivering bioactive factors in a controllable manner-which are ultimately useful for the regenerative therapy of periodontal tissues.

Biomaterials for periodontal regeneration: a review of ceramics and polymers

Periodontal disease is characterized by the destruction of periodontal tissues. Various methods of regenerative periodontal therapy, including the use of barrier membranes, bone replacement grafts, growth factors and the combination of these procedures have been investigated. The development of biomaterials for tissue engineering has considerably improved the available treatment options above. They fall into two broad classes: ceramics and polymers. The available ceramic-based materials include calcium phosphate (eg, tricalcium phosphate and hydroxyapatite), calcium sulfate and bioactive glass. The bioactive glass bonds to the bone with the formation of a layer of carbonated hydroxyapatite in situ. The natural polymers include modified polysaccharides (eg, chitosan,) and polypeptides (collagen and gelatin). Synthetic polymers [eg, poly(glycolic acid), poly(L-lactic acid)] provide a platform for exhibiting the biomechanical properties of scaffolds in tissue engineering. The materials usually work as osteogenic, osteoconductive and osteoinductive scaffolds. Polymers are more widely used as a barrier material in guided tissue regeneration (GTR). They are shown to exclude epithelial downgrowth and allow periodontal ligament and alveolar bone cells to repopulate the defect. An attempt to overcome the problems related to a collapse of the barrier membrane in GTR or epithelial downgrowth is the use of a combination of barrier membranes and grafting materials. This article reviews various biomaterials including scaffolds and membranes used for periodontal treatment and their impacts on the experimental or clinical management of periodontal defect.

Surgical Approaches Based on Biological Objectives: GTR versus GBR Techniques

Guided tissue regenerative (GTR) therapies are performed to regenerate the previously lost tooth supporting structure, thus maintaining the aesthetics and masticatory function of the available dentition. Alveolar ridge augmentation procedures (GBR) intend to regain the alveolar bone lost following tooth extraction and/or periodontal disease. Several biomaterials and surgical approaches have been proposed. In this paper we report biomaterials and surgical techniques used for periodontal and bone regenerative procedures. Particular attention will be adopted to highlight the biological basis for the different therapeutic approaches.

Bone repair cells for craniofacial regeneration

Reconstruction of complex craniofacial deformities is a clinical challenge in situations of injury, congenital defects or disease. The use of cell-based therapies represents one of the most advanced methods for enhancing the regenerative response for craniofacial wound healing. Both somatic and stem cells have been adopted in the treatment of complex osseous defects and advances have been made in finding the most adequate scaffold for the delivery of cell therapies in human regenerative medicine. As an example of such approaches for clinical application for craniofacial regeneration, Ixmyelocel-T or bone repair cells are a source of bone marrow derived stem and progenitor cells. They are produced through the use of single pass perfusion bioreactors for CD90+ mesenchymal stem cells and CD14+ monocyte/macrophage progenitor cells. The application of ixmyelocel-T has shown potential in the regeneration of muscular, vascular, nervous and osseous tissue. The purpose of this manuscript is to highlight cell therapies used to repair bony and soft tissue defects in the oral and craniofacial complex. The field at this point remains at an early stage, however this review will provide insights into the progress being made using cell therapies for eventual development into clinical practice.

Methods to validate tooth-supporting regenerative therapies

In humans, microbially induced inflammatory periodontal diseases are the primary initiators that disrupt the functional and structural integrity of the periodontium (i.e., the alveolar bone, the periodontal ligament, and the cementum). The reestablishment of its original structure, properties, and function constitutes a significant challenge in the development of new therapies to regenerate tooth-supporting defects. Preclinical models represent an important in vivo tool to critically evaluate and analyze the key aspects of novel regenerative therapies, including (1) safety, (2) effectiveness, (3) practicality, and (4) functional and structural stability over time. Therefore, these models provide foundational data that supports the clinical validation and the development of novel innovative regenerative periodontal technologies. Steps are provided on the use of the root fenestration animal model for the proper evaluation of periodontal outcome measures using the following parameters: descriptive histology, histomorphometry, immunostaining techniques, three-dimensional imaging, electron microscopy, gene expression analyses, and safety assessments. These methods will prepare investigators and assist them in identifying the key end points that can then be adapted to later stage human clinical trials.

Coculture strategies in bone tissue engineering: the impact of culture conditions on pluripotent stem cell populations

The use of pluripotent stem cell populations for bone tissue regeneration provides many opportunities and challenges within the bone tissue engineering field. For example, coculture strategies have been utilized to mimic embryological development of bone tissue, and particularly the critical intercellular signaling pathways. While research in bone biology over the last 20 years has expanded our understanding of these intercellular signaling pathways, we still do not fully understand the impact of the system's physical characteristics (orientation, geometry, and morphology). This review of coculture literature delineates the various forms of coculture systems and their respective outcomes when applied to bone tissue engineering. To understand fully the key differences between the different coculture methods, we must appreciate the underlying paradigms of physiological interactions. Recent advances have enabled us to extrapolate these techniques to larger dimensions and higher geometric resolutions. Finally, the contributions of bioreactors, micropatterned biomaterials, and biomaterial interaction platforms are evaluated to give a sense of the sophistication established by a combination of these concepts with coculture systems.

Heterogeneous dental follicle cells and the regeneration of complex periodontal tissues

Dental follicle cells (DFCs) are a heterogeneous population that exhibit a variety of phenotypes. However, it remains unclear whether DFCs can maintain stem cell characteristics, or mediate tissue-regeneration to form single or complex tissues in the periodontium, after long-term culturing. Therefore, DFCs were isolated from human impacted molars (HIM-DFCs), passaged >30 times, and then evaluated for their heterogeneity and multipotential differentiation. Morphology, proliferation, epitope profile, and mineralization characteristics of clones derived from single HIM-DFCs in vitro were also assayed. HIM-DFCs (passage #30) were found to be positive for the heterogeneous markers, Notch-1, stro-1, alkaline phosphomonoesterase (ALP), type I collagen (COL-I), type III collagen (COL-III), and osteocalcine. Moreover, passage #30 of the HDF1, 2, and 3 subclone classes identified in this study were found to express high levels of the mesenchymal stem cells markers, CD146 and Stro1. HDF3 subclones were also associated with the strongest ALP staining detected, and strongly expressed osteoblast and cementoblast markers, including COL-I, COL-III, bone sialoprotein (BSP), and Runx2. In contrast, HDF1 subclone analyzed strongly expressed COL-I and COL-III, yet weakly expressed BSP and Runx2. The HDF2 subclone was associated with the strongest proliferative capacity. To evaluate differentiation characteristics in vivo, these various cell populations were combined with ceramic bovine bone and implanted into subcutaneous pockets of nude mice. The 30th passage of subclone HDF1 and 3 were observed to contribute to fiber collagens and the mineralized matrix present, respectively, whereas HDF2 subclones were found to have a minimal role in these formations. The formation of a cementum-periodontal ligament (PDL) complex was observed 6 weeks after HIM-DFCs (passage #30) were implanted in vivo, thus suggesting that these cells maintain stem cell characteristics. Therefore, subclone HDF1-3 may be related to the differentiation of fibroblasts in the PDL, undifferentiated cells, and osteoblasts and cementoblasts, respectively. Overall, this study is the first to amplify HIM-DFCs and associated subclones with the goal of reconstructing complex or single periodontium. Moreover, our results demonstrate the potential for this treatment approach to address periodontal defects that result from periodontitis, or for the regeneration of teeth.

Cell- and gene-based therapeutic strategies for periodontal regenerative medicine

Inflammatory periodontal diseases are a leading cause of tooth loss and are linked to multiple systemic conditions, such as cardiovascular disease and stroke. Reconstruction of the support and function of affected tooth-supporting tissues represents an important therapeutic endpoint for periodontal regenerative medicine. An improved understanding of periodontal biology coupled with current advances in scaffolding matrices has introduced novel treatments that use cell and gene therapy to enhance periodontal tissue reconstruction and its biomechanical integration. Cell and gene delivery technologies have the potential to overcome limitations associated with existing periodontal therapies, and may provide a new direction in sustainable inflammation control and more predictable tissue regeneration of supporting alveolar bone, periodontal ligament, and cementum. This review provides clinicians with the current status of these early-stage and emerging cell- and gene-based therapeutics in periodontal regenerative medicine, and introduces their future application in clinical periodontal treatment. The paper concludes with prospects on the application of cell and gene tissue engineering technologies for reconstructive periodontology.

Periodontal tissue engineering and regeneration: current approaches and expanding opportunities

The management of periodontal tissue defects that result from periodontitis represents a medical and socioeconomic challenge. Concerted efforts have been and still are being made to accelerate and augment periodontal tissue and bone regeneration, including a range of regenerative surgical procedures, the development of a variety of grafting materials, and the use of recombinant growth factors. More recently, tissue-engineering strategies, including new cell- and/or matrix-based dimensions, are also being developed, analyzed, and employed for periodontal regenerative therapies. Tissue engineering in periodontology applies the principles of engineering and life sciences toward the development of biological techniques that can restore lost alveolar bone, periodontal ligament, and root cementum. It is based on an understanding of the role of periodontal formation and aims to grow new functional tissues rather than to build new replacements of periodontium. Although tissue engineering has merged to create more opportunities for predictable and optimal periodontal tissue regeneration, the technique and design for preclinical and clinical studies remain in their early stages. To date, the reconstruction of small- to moderate-sized periodontal bone defects using engineered cell-scaffold constructs is technically feasible, and some of the currently developed concepts may represent alternatives for certain ideal clinical scenarios. However, the predictable reconstruction of the normal structure and functionality of a tooth-supporting apparatus remains challenging. This review summarizes current regenerative procedures for periodontal healing and regeneration and explores their progress and difficulties in clinical practice, with particular emphasis placed upon current challenges and future possibilities associated with tissue-engineering strategies in periodontal regenerative medicine.

Osteogenic differentiation capacity of porcine dental follicle progenitor cells

This study examined the effect of extracellular matrix (ECM) on the osteogenic differentiation capacity and osteogenesis of dental follicle cells. Single cell-derived porcine dental follicle cells (DFC-I) obtained at the early stage of crown formation in tooth were subcultured and characterized using periodontal ligament cells (PDLC) and bone marrow-derived mesenchymal stem cells (BMSC) as comparison cell populations. The effect of ECM constituents including collagen type I, fibronectin, laminin, and collagen type IV on the differentiation of DFC-1 into osteogenic-lineage cells was evaluated in vitro. In addition, the DFC-1, PDLC, and BMSC populations were compared for osteogenic capacity in vitro by Alizarin red staining and in vivo by transplantation. DFC-I showed different features from PDLC and BMSC. Different components of ECM had different effects on the differentiation of DFC-1 into osteogenic-lineage cells in vitro. Alkaline phosphatase activity and matrix mineralization as early- and late-stage markers of osteogenesis, respectively, supported the differentiation of DFC-1 into osteogenic-related cells in vitro. All three cell types showed equivalent osteogenic capacity in vivo at 4 weeks postoperatively. There were no statistically significant differences among the cell populations with respect to capacity for bone formation. These results suggest a potential application for dental follicle cells in bone-tissue engineering.

Tissue engineering: state of the art in oral rehabilitation

More than 85% of the global population requires repair or replacement of a craniofacial structure. These defects range from simple tooth decay to radical oncologic craniofacial resection. Regeneration of oral and craniofacial tissues presents a formidable challenge that requires synthesis of basic science, clinical science and engineering technology. Identification of appropriate scaffolds, cell sources and spatial and temporal signals (the tissue engineering triad) is necessary to optimize development of a single tissue, hybrid organ or interface. Furthermore, combining the understanding of the interactions between molecules of the extracellular matrix and attached cells with an understanding of the gene expression needed to induce differentiation and tissue growth will provide the design basis for translating basic science into rationally developed components of this tissue engineering triad. Dental tissue engineers are interested in regeneration of teeth, oral mucosa, salivary glands, bone and periodontium. Many of these oral structures are hybrid tissues. For example, engineering the periodontium requires growth of alveolar bone, cementum and the periodontal ligament. Recapitulation of biological development of hybrid tissues and interfaces presents a challenge that exceeds that of engineering just a single tissue. Advances made in dental interface engineering will allow these tissues to serve as model systems for engineering other tissues or organs of the body. This review will begin by covering basic tissue engineering principles and strategic design of functional biomaterials. We will then explore the impact of biomaterials design on the status of craniofacial tissue engineering and current challenges and opportunities in dental tissue engineering.

Putative stem cells in regenerating human periodontium

BACKGROUND AND OBJECTIVE

Human postnatal stem cells have been identified in periodontal ligament, with the potential to regenerate the periodontium in vivo. However, it is unclear if periodontal ligament stem cells are present in regenerating periodontal tissues. The aim of this study was to identify and localize putative stem cells in block biopsies and explant cultures of regenerating human periodontal tissues.

MATERIAL AND METHODS

Guided tissue regeneration was carried out on the molars of three human volunteers. After 6 wk, the teeth with the surrounding regenerating tissues and bone were surgically removed and processed for immunohistochemistry. The mesenchymal stem cell-associated markers STRO-1, CD146 and CD44 were used to identify putative stem cells. Cell cultures established from regenerating tissue explants were analysed by flow cytometry to assess the expression of these markers. Mineralization, calcium concentration and adipogenic potential of regenerating tissue cells were assessed and compared with periodontal ligament stem cells, bone marrow stromal stem cells and gingival fibroblasts.

RESULTS

STRO-1(+), CD44(+) and CD146(+) cells were identified in the regenerating tissues. They were found mainly in the paravascular and extravascular regions. Flow cytometry revealed that cultured regenerating tissue cells expressed all three mesenchymal stem cell associated markers. The regenerating tissue cells were able to form mineral deposits and lipid-containing adipocytes. However, the level of mineralization in these cells was lower than that of periodontal ligament stem cells and bone marrow stromal stem cells.

CONCLUSION

Cells with characteristics of putative mesenchymal stem cells were found in regenerating periodontal tissues, implying their involvement in periodontal regeneration.

Nanofibrous scaffolds incorporating PDGF-BB microspheres induce chemokine expression and tissue neogenesis in vivo

Platelet-derived growth factor (PDGF) exerts multiple cellular effects that stimulate wound repair in multiple tissues. However, a major obstacle for its successful clinical application is the delivery system, which ultimately controls the in vivo release rate of PDGF. Polylactic-co-glycolic acid (PLGA) microspheres (MS) in nanofibrous scaffolds (NFS) have been shown to control the release of rhPDGF-BB in vitro. In order to investigate the effects of rhPDGF-BB release from MS in NFS on gene expression and enhancement of soft tissue engineering, rhPDGF-BB was incorporated into differing molecular weight (MW) polymeric MS. By controlling the MW of the MS over a range of 6.5 KDa–64 KDa, release rates of PDGF can be regulated over periods of weeks to months in vitro. The NFS-MS scaffolds were divided into multiple groups based on MS release characteristics and PDGF concentration ranging from 2.5–25.0 µg and evaluated in vivo in a soft tissue wound repair model in the dorsa of rats. At 3, 7, 14 and 21 days post-implantation, the scaffold implants were harvested followed by assessments of cell penetration, vasculogenesis and tissue neogenesis. Gene expression profiles using cDNA microarrays were performed on the PDGF-releasing NFS. The percentage of tissue invasion into MS-containing NFS at 7 days was higher in the PDGF groups when compared to controls. Blood vessel number in the HMW groups containing either 2.5 or 25 µg PDGF was increased above those of other groups at 7d (p<0.01). Results from cDNA array showed that PDGF strongly enhanced in vivo gene expression of the CXC chemokine family members such as CXCL1, CXCL2 and CXCL5. Thus, sustained release of rhPDGF-BB, controlled by slow-releasing MS associated with the NFS delivery system, enhanced cell migration and angiogenesis in vivo, and may be related to an induced expression of chemokine-related genes. This approach offers a technology to accurately control growth factor release to promote soft tissue engineering in vivo.

Encapsulation and osteoinduction of human periodontal ligament fibroblasts in chitosan–hydroxyapatite microspheres

Periodontal ligament cells play a crucial role in the regeneration of periodontal tissues and an undifferentiated mesenchymal cell subset is thought to exist within this population. The aim of this study was to assess the osteogenic differentiation potential of human periodontal ligament fibroblasts (hPDLFs) in three dimensional (3D)-osteogenic culture environment following encapsulation in chitosan-hydroxyapatite (C/HA) microspheres with the size range of 350-450 microm. Human PDLF cultures were established and three experimental groups were formed: (i) two-dimensional (2D)-culture as single cell monolayer, (ii) 3D-static culture of C/HA encapsulated hPDLFs, and (iii) 3D-dynamic culture of C/HA encapsulated hPDLFs in a rotating wall vessel bioreactor. The cells were cultured in standard culture medium supplemented with beta-glycerophosphate, dexamethasone, and ascorbic acid. After 21 days, immunohistochemistry was performed using antibodies against osteonectin, osteopontin, bone-sialoprotein, and osteocalcin as osteogenic differentiation markers. Phase-contrast and scanning electron microscopy observations were used for histological and morphological evaluation. The combined effects of osteoinductive medium and HA-containing composite microsphere material on encapsulated hPDLFs resulted in the transformation of a considerable portion of the cells into osteoblastic lineage at the end of the experiments. Results demonstrate the ability of hPDLFs to undergo osteogenic differentiation upon induction in vitro, both under 2D and 3D culture conditions. C/HA microspheres in microgravity bioreactor may serve as a suitable 3D environment to support the osteogenic differentiation of human PDLFs, in vitro.

Noncanonical Wnt-4 signaling enhances bone regeneration of mesenchymal stem cells in craniofacial defects through activation of p38 MAPK

Mesenchymal stem cells (MSCs) are multipotent cells that can be differentiated into osteoblasts and provide an excellent cell source for bone regeneration and repair. Recently, the canonical Wnt/beta-catenin signaling pathway has been found to play a critical role in skeletal development and osteogenesis, implying that Wnts can be utilized to improve de novo bone formation mediated by MSCs. However, it is unknown whether noncanonical Wnt signaling regulates osteogenic differentiation. Here, we find that Wnt-4 enhanced in vitro osteogenic differentiation of MSCs isolated from human adult craniofacial tissues and promoted bone formation in vivo. Whereas Wnt-4 did not stabilize beta-catenin, it activated p38 MAPK in a novel noncanonical signaling pathway. The activation of p38 was dependent on Axin and was required for the enhancement of MSC differentiation by Wnt-4. Moreover, using two different models of craniofacial bone injury, we found that MSCs genetically engineered to express Wnt-4 enhanced osteogenesis and improved the repair of craniofacial defects in vivo. Taken together, our results reveal that noncanonical Wnt signaling could also play a role in osteogenic differentiation. Wnt-4 may have a potential use in improving bone regeneration and repair of craniofacial defects.

Three-dimensional micro-computed tomographic imaging of alveolar bone in experimental bone loss or repair

BACKGROUND

Micro-computed tomography (micro-CT) offers significant potential for identifying mineralized structures. However, three-dimensional (3-D) micro-CT of alveolar bone has not been adapted readily for quantification. Moreover, conventional methods are not highly sensitive for analyzing bone loss or bone gain following periodontal disease or reconstructive therapy. The objective of this investigation was to develop a micro-CT methodology for quantifying tooth-supporting alveolar bone in 3-D following experimental preclinical situations of periodontitis or reconstructive therapy.

METHODS

Experimental in vivo bone loss or regeneration situations were developed to validate the micro-CT imaging techniques. Twenty mature Sprague-Dawley rats were divided into two groups: bone loss (Porphyromonas gingivalis lipopolysaccharide-mediated bone resorption) and regenerative therapy. Micro-CT and software digitized specimens were reconstructed three-dimensionally for linear and volumetric parameter assessment of alveolar bone (linear bone height, bone volume, bone volume fraction, bone mineral content, and bone mineral density). Intra- and interexaminer reproducibility and reliability were compared for methodology validation.

RESULTS

The results demonstrated high examiner reproducibility for linear and volumetric parameters with high intraclass correlation coefficient (ICC) and coefficient of variation (CV). The ICC showed that the methodology was highly reliable and reproducible (ICC >0.99; 95% confidence interval, 0.937 to 1.000; CV <1.5%), suggesting that 3-D measurements may provide better alveolar bone analysis than conventional 2-D methods.

CONCLUSIONS

The developed methods allow for highly accurate and reproducible static measurements of tooth-supporting alveolar bone following preclinical situations of bone destruction or regeneration. Future investigations should focus on using in vivo micro-CT imaging for real-time assessments of alveolar bone changes.

Craniofacial tissue engineering by stem cells

Craniofacial tissue engineering promises the regeneration or de novo formation of dental, oral, and craniofacial structures lost to congenital anomalies, trauma, and diseases. Virtually all craniofacial structures are derivatives of mesenchymal cells. Mesenchymal stem cells are the offspring of mesenchymal cells following asymmetrical division, and reside in various craniofacial structures in the adult. Cells with characteristics of adult stem cells have been isolated from the dental pulp, the deciduous tooth, and the periodontium. Several craniofacial structures--such as the mandibular condyle, calvarial bone, cranial suture, and subcutaneous adipose tissue--have been engineered from mesenchymal stem cells, growth factor, and/or gene therapy approaches. As a departure from the reliance of current clinical practice on durable materials such as amalgam, composites, and metallic alloys, biological therapies utilize mesenchymal stem cells, delivered or internally recruited, to generate craniofacial structures in temporary scaffolding biomaterials. Craniofacial tissue engineering is likely to be realized in the foreseeable future, and represents an opportunity that dentistry cannot afford to miss.

Advances in defining regulators of cementum development and periodontal regeneration

Substantial advancements have been made in defining the cells and molecular signals that guide tooth crown morphogenesis and development. As a result, very encouraging progress has been made in regenerating crown tissues by using dental stem cells and recombining epithelial and mesenchymal tissues of specific developmental ages. To date, attempts to regenerate a complete tooth, including the critical periodontal tissues of the tooth root, have not been successful. This may be in part due to a lesser degree of understanding of the events leading to the initiation and development of root and periodontal tissues. Controversies still exist regarding the formation of periodontal tissues, including the origins and contributions of cells, the cues that direct root development, and the potential of these factors to direct regeneration of periodontal tissues when they are lost to disease. In recent years, great strides have been made in beginning to identify and characterize factors contributing to formation of the root and surrounding tissues, that is, cementum, periodontal ligament, and alveolar bone. This review focuses on the most exciting and important developments over the last 5 years toward defining the regulators of tooth root and periodontal tissue development, with special focus on cementogenesis and the potential for applying this knowledge toward developing regenerative therapies. Cells, genes, and proteins regulating root development are reviewed in a question-answer format in order to highlight areas of progress as well as areas of remaining uncertainty that warrant further study.

Dental follicle progenitor cell heterogeneity in the developing mouse periodontium

As a developmental precursor for diverse periodontal tissues, the dental follicle (DF) harbors great promise for periodontal tissue regeneration. However, development of optimal therapy awaits the answer to a key question that impinges on many issues in development-Do adult progenitor tissues form a homogeneous cell population that differentiates into target tissues when they arrive at the site, or they contain heterogeneous cell populations that are committed to specific fates? To address the homogeneity/heterogeneity question, we analyzed differentiation pathways and markers in several cloned DF cell lines. Our studies revealed that each of our cloned DF lines featured remarkably unique characteristics, indicative of a separate and distinct lineage. One line, DF1, was high in proliferative activity but did not display any mineralization behavior, suggesting that it might be related to a periodontal ligament-type lineage. DF2 was similar to DF1, but featured remarkably high alkaline phosphatase activity indicative of a highly undifferentiated state. DF3 matched the mineralization characteristics of a same stage alveolar bone line AB1 in terms of gene expression and von Kossa staining, indicating that DF3 might be of cementoblastic or alveolar bone osteoblastic lineage. To verify the multilineage potential of the DF for purposes of tissue engineering, a series of differentiation induction experiments was conducted. For identification purposes, characteristics of these heterogeneous follicular progenitor cells were compared with follicle components in tissue sections of the postnatal developing periodontium. The presence of heterogeneous cell populations in the DF mirrors individual developmental pathways in the formation of the dental integument. The profound cellular heterogeneity of the DF as an adult progenitor for tissue regeneration also suggests that heterogeneous cellular constituents might play as much of a role in tissue regeneration as the inducible characteristics of individual lineages might do.

Defining the roots of cementum formation

Significant progress has been seen in research aimed at regeneration of the disease-damaged periodontium. Our own strategy has been to approach periodontal tissue development (i.e. root, cementum, periodontal ligament, and bone) as a source for the identification of key regulators of cellular processes that may be applicable to periodontal tissue repair. Specifically, enamel-like molecules, bone morphogenetic proteins (BMPs), and phosphates have been investigated for their role in altering gene expression and cell functions in follicle cells, periodontal ligament cells, and cementoblasts. Amelogenin, leucine-rich amelogenin peptide, and tyrosine-rich amelogenin peptide have been found to similarly affect cementoblast gene expression and cementoblast-mediated mineralization in vitro; however, these enamel-like factors do not increase cell proliferation as has been observed in cells treated with Emdogain (Biora AB, Malmö, Sweden), an enamel matrix derivative. BMP-2 has been found to promote differentiation of follicle cells into a cementoblast/osteoblast phenotype, and BMP-3 is being investigated as a negative regulator of mineralization. The increased ratio of phosphate to pyrophosphate in the local region during root development has been found to significantly enhance the extent of cementum formation in animal models. Furthermore, phosphate has been identified as a regulator of cementoblast SIBLING (small integrin-binding ligand N-linked glycoprotein) gene expression in vitro. These investigations of candidate factors for periodontal regeneration have uncovered mechanisms regulating gene expression and cell function in cells controlling the behavior of periodontal tissues (i.e. follicle cells, periodontal cells, and cementoblasts) and offer new directions to consider for clinical repair of periodontal defects.

Osteogenic induction of human periodontal ligament fibroblasts under two- and three-dimensional culture conditions

Human periodontal ligament fibroblasts (hPDLF) play a key role in the regeneration of periodontal compartment during guided tissue regeneration procedures. This property is attributed to the progenitor cell subsets residing in the area. The aim of this study was to investigate whether hPDLFs could undergo an osteogenic differentiation under two- and three-dimensional (2D and 3D) culture conditions upon osteogenic induction. hPDLFs were isolated from six healthy donors, cultured, and expanded according to standard protocols. Then, three osteogenic culture conditions (dexamethasone, ascorbic acid, and beta-glycerophosphate) were established: 1) 2D culture as single-cell monolayer, 2) 3D-static culture on mineralized poly(DL-lactic-co-glycolic acid) (PLGA) scaffold, and 3) 3D culture on mineralized PLGA scaffold inside the NASA-approved bioreactor stimulating microgravity conditions. After 21 days of osteogenic induction, the majority of monolayer cultures had undergone differentiation toward osteogenic lineage, as indicated by morphological changes, mineralization assay, and some phenotypical properties. However, immunohistochemistry revealed that the scaffold cultures expressed higher levels of osteogenic marker proteins compared with that of the monolayers. Secondly, hPDLF-PLGA constructs in bioreactor showed an increased expression of osteopontin and osteocalcin compared with that of static 3D culture after 21 days. Results indicate that human periodontal ligament contains a subpopulation of cells capable of undergoing osteogenic differentiation and presumably contributing to regeneration of bone defects in the adjacent area. Human PDLF-seeded mineralized PLGA scaffold in microgravity bioreactor may be used to support osteogenic differentiation in vitro. Thus, this system may offer new potential benefits as a tool for periodontal tissue engineering.

Osteogenic differentiation of human dental papilla mesenchymal cells

We isolated dental papilla from impacted human molar and proliferated adherent fibroblastic cells after collagenase treatment of the papilla. The cells were negative for hematopoietic markers but positive for CD29, CD44, CD90, CD105, and CD166. When the cells were further cultured in the presence of beta-glycerophosphate, ascorbic acid, and dexamethasone for 14 days, mineralized areas together with osteogenic differentiation evidenced by high alkaline phosphatase activity and osteocalcin contents were observed. The differentiation was confirmed at both protein and gene expression levels. The cells can also be cryopreserved and, after thawing, could show in vivo bone-forming capability. These results indicate that mesenchymal type cells localize in dental papilla and that the cells can be culture expanded/utilized for bone tissue engineering.

Stem cell-based composite tissue constructs for regenerative medicine

A major task of contemporary medicine and dentistry is restoration of human tissues and organs lost to diseases and trauma. A decade-long intense effort in tissue engineering has provided the proof of concept for cell-based replacement of a number of individual tissues such as the skin, cartilage, and bone. Recent work in stem cell-based in vivo restoration of multiple tissue phenotypes by composite tissue constructs such as osteochondral and fibro-osseous grafts has demonstrated probable clues for bioengineered replacement of complex anatomical structures consisting of multiple cell lineages such as the synovial joint condyle, tendon-bone complex, bone-ligament junction, and the periodontium. Of greater significance is a tangible contribution by current attempts to restore the structure and function of multitissue structures using cell-based composite tissue constructs to the understanding of ultimate biological restoration of complex organs such as the kidney or liver. The present review focuses on recent advances in stem cell-based composite tissue constructs and attempts to outline challenges for the manipulation of stem cells in tailored biomaterials in alignment with approaches potentially utilizable in regenerative medicine of human tissues and organs.

RhBMP-7 improves survival and eruption in a growing tooth avulsion trauma model

Long-term loss of avulsed and replanted teeth is a frequent clinical problem. Bone morphogenetic protein-7 (BMP 7) induces cementogenesis in periodontitis-associated periodontal ligament (PDL) defects. This study's aim was to assess the utility of rhBMP 7 in a tooth avulsion trauma model in growing individuals. Immature primary incisors of 12 minipigs were extracted. PDL and cementum were removed either partially (group 1: 4 mm2 [n=28 teeth]; group 2: 16 mm2 [n=26 teeth]) or totally (group 3 [n=26 teeth]). 500 microg rhBMP 7/g collagen matrix was applied to the teeth from one side while the corresponding teeth on the contralateral side served as controls (split mouth model). After an experimental period of 4 months, microradiography, fluorescence and light microscopy of nondecalcified sections were performed. All teeth of group 1 survived and all teeth of group 3 were lost, whether rhBMP-7 was applied or not. In group 2, nine out of ten teeth survived when rhBMP-7 was applied and four out of ten teeth were lost when rhBMP-7 was not applied. In the presence of rhBMP-7, eruption of teeth in group 2 was significantly improved (difference [median]: 5 mm, P<0.05, n=6). Even though there was a tendency towards increased deposition rates of cementum under rhBMP-7, this difference was not significant (Wilcoxon: P>0.05, ANOVA: P=0.002; n=6/group). In conclusion, rhBMP-7 improved survival rates and eruption of replanted teeth in growing individuals. No adverse effects were seen. Based on the present results, future clinical trials appear to be warranted.