Biocompatibility of poly(ether)urethane-gold nanocomposites

Assessment of the Biocompatibility Ability and Differentiation Capacity of Mesenchymal Stem Cells on Biopolymer/Gold Nanocomposites

This study assessed the biocompatibility of two types of nanogold composites: fibronectin-gold (FN-Au) and collagen-gold (Col-Au). It consisted of three main parts: surface characterization, in vitro biocompatibility assessments, and animal models. To determine the structural and functional differences between the materials used in this study, atomic force microscopy, Fourier-transform infrared spectroscopy, and ultraviolet-visible spectrophotometry were used to investigate their surface topography and functional groups. The F-actin staining, proliferation, migration, reactive oxygen species generation, platelet activation, and monocyte activation of mesenchymal stem cells (MSCs) cultured on the FN-Au and Col-Au nanocomposites were investigated to determine their biological and cellular behaviors. Additionally, animal biocompatibility experiments measured capsule formation and collagen deposition in female Sprague-Dawley rats. The results showed that MSCs responded better on the FN-Au and Col-AU nanocomposites than on the control (tissue culture polystyrene) or pure substances, attributed to their incorporation of an optimal Au concentration (12.2 ppm), which induced significant surface morphological changes, nano topography cues, and better biocompatibility. Moreover, neuronal, endothelial, bone, and adipose tissues demonstrated better differentiation ability on the FN-Au and Col-Au nanocomposites. Nanocomposites have a crucial role in tissue engineering and even vascular grafts. Finally, MSCs were demonstrated to effectively enhance the stability of the endothelial structure, indicating that they can be applied as promising alternatives to clinics in the future.

In Situ Synthesis of Environmentally Friendly Waterborne Polyurethane Extended with Regenerated Cellulose Nanoparticles for Enhanced Mechanical Performances

The development of waterborne polyurethane (WPU) has been stimulated as an alternative to solvent-based polyurethanes due to low-VOC alternatives and reduced exposure to solvents. However, their relatively low mechanical performance and degradation have presented challenges in their wide application. Here, we developed environmentally-friendly bio polyol-based WPU nanocomposite dispersions and films, and presented the optimal process conditions for their manufacture. Additionally, the condition was established without using harmful catalysts or ethyl methyl ketone (MEK) during the polymerization. Moreover, regenerated cellulose nanoparticles (RCNs) were employed as natural chain-extenders in order to improve the biodegradability and mechanical performances of the nanocomposite films. The RCNs have a lower crystallinity compared to cellulose nanocrystals (CNCs), allowing them to possess high toughness without interfering with the elastomeric properties of polyurethane. The prepared CWPU/RCNs nanocomposite films exhibited high toughness of 58.8 ± 3 kgf∙mm and elongation at break of 240 ± 20%. In addition, depending on the molar ratio of NCO/OH, the polyurethane particle size is variously controlled from 70 to 230 nm, enabling to fabricate their dispersions with various transmittances. We believe that our findings not only open a meaningful path toward green elastomers with biodegradability but provides the design concept for bio-elastomers in order to develop industrial elastomers with mechanical and thermal properties.

Influence of nanoparticles on the haemostatic balance: between thrombosis and haemorrhage

Maintenance of a delicate haemostatic balance or a balance between clotting and bleeding is critical to human health. Irrespective of administration route, nanoparticles can reach the bloodstream and might interrupt the haemostatic balance by interfering with one or more components of the coagulation, anticoagulation, and fibrinolytic systems, which potentially lead to thrombosis or haemorrhage. However, inadequate understanding of their effects on the haemostatic balance, along with the fact that most studies mainly focus on the functionality of nanoparticles while forgetting or leaving behind their risk to the body's haemostatic balance, is a major concern. Hence, our review aims to provide a comprehensive depiction of nanoparticle-haemostatic balance interactions, which has not yet been covered. The synergistic roles of cells and plasma factors participating in haemostatic balance are presented. Possible interactions and interference of each type of nanoparticle with the haemostatic balance are comprehensively discussed, particularly focusing on the underlying mechanisms. Interactions of nanoparticles with innate immunity potentially linked to haemostasis are mentioned. Various physicochemical characteristics that influence the nanoparticle-haemostatic balance are detailed. Challenges and future directions are also proposed. This insight would be valuable for the establishment of nanoparticles that can either avoid unintended interference with the haemostatic balance or purposely downregulate/upregulate its key components in a controlled manner.

Physical Gold Nanoparticle-Decorated Polyethylene Glycol-Hydroxyapatite Composites Guide Osteogenesis and Angiogenesis of Mesenchymal Stem Cells

In this study, polyethylene glycol (PEG) with hydroxyapatite (HA), with the incorporation of physical gold nanoparticles (AuNPs), was created and equipped through a surface coating technique in order to form PEG-HA-AuNP nanocomposites. The surface morphology and chemical composition were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), UV–Vis spectroscopy (UV–Vis), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle assessment. The effects of PEG-HA-AuNP nanocomposites on the biocompatibility and biological activity of MC3T3-E1 osteoblast cells, endothelial cells (EC), macrophages (RAW 264.7), and human mesenchymal stem cells (MSCs), as well as the guiding of osteogenic differentiation, were estimated through the use of an in vitro assay. Moreover, the anti-inflammatory, biocompatibility, and endothelialization capacities were further assessed through in vivo evaluation. The PEG-HA-AuNP nanocomposites showed superior biological properties and biocompatibility capacity for cell behavior in both MC3T3-E1 cells and MSCs. These biological events surrounding the cells could be associated with the activation of adhesion, proliferation, migration, and differentiation processes on the PEG-HA-AuNP nanocomposites. Indeed, the induction of the osteogenic differentiation of MSCs by PEG-HA-AuNP nanocomposites and enhanced mineralization activity were also evidenced in this study. Moreover, from the in vivo assay, we further found that PEG-HA-AuNP nanocomposites not only facilitate the anti-immune response, as well as reducing CD86 expression, but also facilitate the endothelialization ability, as well as promoting CD31 expression, when implanted into rats subcutaneously for a period of 1 month. The current research illustrates the potential of PEG-HA-AuNP nanocomposites when used in combination with MSCs for the regeneration of bone tissue, with their nanotopography being employed as an applicable surface modification approach for the fabrication of biomaterials.

Inflammatory Modulation of Polyethylene Glycol-AuNP for Regulation of the Neural Differentiation Capacity of Mesenchymal Stem Cells

A nanocomposite composed of polyethylene glycol (PEG) incorporated with various concentrations (~17.4, ~43.5, ~174 ppm) of gold nanoparticles (Au) was created to investigate its biocompatibility and biological performance in vitro and in vivo. First, surface topography and chemical composition was determined through UV-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), free radical scavenging ability, and water contact angle measurement. Additionally, the diameters of the PEG-Au nanocomposites were also evaluated through dynamic light scattering (DLS) assay. According to the results, PEG containing 43.5 ppm of Au demonstrated superior biocompatibility and biological properties for mesenchymal stem cells (MSCs), as well as superior osteogenic differentiation, adipocyte differentiation, and, particularly, neuronal differentiation. Indeed, PEG-Au 43.5 ppm induced better cell adhesion, proliferation and migration in MSCs. The higher expression of the SDF-1α/CXCR4 axis may be associated with MMPs activation and may have also promoted the differentiation capacity of MSCs. Moreover, it also prevented MSCs from apoptosis and inhibited macrophage and platelet activation, as well as reactive oxygen species (ROS) generation. Furthermore, the anti-inflammatory, biocompatibility, and endothelialization capacity of PEG-Au was measured in a rat model. After implanting the nanocomposites into rats subcutaneously for 4 weeks, PEG-Au 43.5 ppm was able to enhance the anti-immune response through inhibiting CD86 expression (M1 polarization), while also reducing leukocyte infiltration (CD45). Moreover, PEG-Au 43.5 ppm facilitated CD31 expression and anti-fibrosis ability. Above all, the PEG-Au nanocomposite was evidenced to strengthen the differentiation of MSCs into various cells, including fat, vessel, and bone tissue and, particularly, nerve cells. This research has elucidated that PEG combined with the appropriate amount of Au nanoparticles could become a potential biomaterial able to cooperate with MSCs for tissue regeneration engineering.

Nanogold-Carried Graphene Oxide: Anti-Inflammation and Increased Differentiation Capacity of Mesenchymal Stem Cells

Graphene-based nanocomposites such as graphene oxide (GO) and nanoparticle-decorated graphene with demonstrated excellent physicochemical properties have worthwhile applications in biomedicine and bioengineering such as tissue engineering. In this study, we fabricated gold nanoparticle-decorated GO (GO-Au) nanocomposites and characterized their physicochemical properties using UV-Vis absorption spectra, FTIR spectra, contact angle analyses, and free radical scavenging potential. Moreover, we investigated the potent applications of GO-Au nanocomposites on directing mesenchymal stem cells (MSCs) for tissue regeneration. We compared the efficacy of as-prepared GO-derived nanocomposites including GO, GO-Au, and GO-Au (×2) on the biocompatibility of MSCs, immune cell identification, anti-inflammatory effects, differentiation capacity, as well as animal immune compatibility. Our results showed that Au-deposited GO nanocomposites, especially GO-Au (×2), significantly exhibited increased cell viability of MSCs, had good anti-oxidative ability, sponged the immune response toward monocyte-macrophage transition, as well as inhibited the activity of platelets. Moreover, we also validated the superior efficacy of Au-deposited GO nanocomposites on the enhancement of cell motility and various MSCs-derived cell types of differentiation including neuron cells, adipocytes, osteocytes, and endothelial cells. Additionally, the lower induction of fibrotic formation, reduced M1 macrophage polarization, and higher induction of M2 macrophage, as well as promotion of the endothelialization, were also found in the Au-deposited GO nanocomposites implanted animal model. These results suggest that the Au-deposited GO nanocomposites have excellent immune compatibility and anti-inflammatory effects in vivo and in vitro. Altogether, our findings indicate that Au-decorated GO nanocomposites, especially GO-Au (×2), can be a potent nanocarrier for tissue engineering and an effective clinical strategy for anti-inflammation.

Enhancing catalytic potential of gold nanoparticles by linear and cross-linked polyurethane blending

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU) by a heating method. Composites were prepared both from linear and cross-linked polyurethane (LPU and CPU). Catalytic activities of synthesized composites exhibiting 226.4 nm size were evaluated for reduction of Congo red dye. More than 90% Congo red degradation was achieved in just 6 minutes with Au/LPU. Under similar conditions, 30% of dye was degraded with Au/CPU composite in 5 minutes. The effects of different variables such as concentration of dye, catalyst dose and concentration of reagents have been optimized. The degradation process followed first order kinetics. The most efficient composite (Au/LPU) was characterized using UV/Vis, FTIR, SEM, XRD and DLS techniques. The excellent catalytic activity can be attributed to the polyurethane matrix making the dye available to catalytic sites (AuNPs).

Biodelivery of nerve growth factor and gold nanoparticles encapsulated in chitosan nanoparticles for schwann-like cells differentiation of human adipose-derived stem cells

The constant release of neurotrophic factors through a nanomaterial-based delivery system can be an important strategy in medical and pharmaceutical fields for nerve tissue engineering. The present study was aimed at encapsulating NGF and AuNPs in chitosan nanoparticles (NGF-CNPs and AuNPs-CSNPs) and its evaluation on the differentiation potential of human adipose-derived stem cells (h-ADSCs) to Schwann-like cells. The NGF-CNPs were prepared by ionotropic gelation method with tripolyphosphate (TPP) as a crosslinker. After synthesis and characterization of nanoparticles, NGF encapsulation efficiency and release profile were observed by Bradford assay. Next, the effects of NGF-CSNPs and AuNPs-CSNPs on h-ADSCs survival were assessed through MTT assay. Also, the efficacy of Schwann-like cells differentiation was assessed by immunocytochemistry and real-time RT-PCR for S100β and MBP markers. NGF encapsulation efficiency was found about 85% and controlled and sustained release of NGF was observed during 7 days in vitro (74.63 ± 2.07%). The findings revealed that these nanoparticles are cytocompatible. The immunocytochemical analysis indicated that NGF-CSNPs and AuNPs-CSNPs could significantly increase the differentiated rate and myelinogenic potential of Schwann-like cells (p < 0.05). Besides, the expression level of GFAP, S100β, and MBP demonstrated significant upregulation in NGF-CSNPs and AuNPs-CSNPs groups compared to the control group (p < 0.05). Hence, it can be proposed that NGF-CNPs and AuNPs-CSNPs are capable of controlled release with improving the ability of h-ADSCs differentiation to Schwann-like cells. Also, the results show the potential future application of this differentiation in nerve tissue regeneration.

One-Pot Processing of Regenerated Cellulose Nanoparticles/Waterborne Polyurethane Nanocomposite for Eco-friendly Polyurethane Matrix

Regenerated cellulose nanoparticles (RCNs) reinforced waterborne polyurethanes (WPU) were developed to improve mechanical properties as well as biodegradability by using a facile, eco-friendly approach, and introducing much stronger chemical bonding than common physical bonding between RCNs and WPU. Firstly, RCNs which have an effect on improving the solubility and stability of a solution, thereby resulting in lower crystallinity, were fabricated by using a NaOH/urea solution. In addition, the stronger chemical bond between RCNs and WPU was here introduced by regarding at which stage in particular added RCNs worked best on strengthening their bond in the process of WPU synthesis. The chemical structure, mechanical, particle size and distribution, viscosity, and thermal properties of the resultant RCNs/WPU nanocomposites were investigated by Fourier transform infrared analysis (FTIR), Zeta-potential analysis, viscometer, thermogravimetric analysis (TGA), Instron, and dynamic mechanical analysis (DMA). The results of all characterizations indicated that the RCNs/WPU-DMF associated with the addition of RCNs in DMF-dispersed step resulted in more effectively crosslinked between WPU and nano-fillers of nanocellulose particles in the dispersion than Acetone and Water-dispersed steps, thereby attributing to novel interactions formed between RCNs and WPU.

Nondegradable magnetic poly (carbonate urethane) microspheres with good shape memory as a proposed material for vascular embolization

In this study, nondegradable poly (carbonate urethane) (PCU) and poly (carbonate urethane) incorporated variable Fe₃O₄ content microspheres (PCU/Fe₃O₄) were synthesized using pre-polymerization and suspension polymerization. Synthesis was confirmed through Fourier transform infrared spectroscopy (FTIR). The effect of Fe₃O₄ incorporation was investigated on crystalline, thermal, shape memory and degradation properties by X-Ray diffraction (XRD), Differential scanning calorimetery (DSC), compression test and degradation in vitro, respectively. Otherwise, the assessment of magnetic characteristics by vibrational sample magnetometry (VSM) disclosed superparamagnetic behavior. The tunable superparamagnetic behavior depends on the amount of magnetic particles incorporated within the networks. The biological study results of as-synthesized polymers from the platelet adhesion test and the cell proliferation inhibition test indicated they were biocompatible in vitro. Fe₃O₄ incorporation was conductive to reducing platelet adhesion in blood contacting test and promotion of rat vascular smooth muscle cell proliferation and growth. These nondegradable, superparamagnetic, biocompatible polymers, combined with their good shape memory properties may allow for their future exploitation in the biomedical field, such as, in cardiovascular implants, targeted tumor treatment, tissue engineering and artificial organ's engineering.

Functional engineered mesenchymal stem cells with fibronectin-gold composite coated catheters for vascular tissue regeneration

Vascularization of engineered tissues remains one of the key problems. Here, we described a novel approach to promote vascularization of engineered tissues using fibronectin (FN) incorporated gold nanoparticles (AuNP) coated onto catheters with mesenchymal stem cells (MSCs) for tissue engineering. We found that the FN-AuNP composite with 43.5 ppm of AuNP exhibited better biomechanical properties and thermal stability than pure FN. FN-AuNP composites promoted MSC proliferation and increased the biocompatibility. Mechanistically, vascular endothelial growth factor (VEGF) promoted MSC migration on FN-AuNP through the endothelial oxide synthase (eNOS)/metalloproteinase (MMP) signaling pathway. Vascular femoral artery tissues isolated from the implanted FN-AuNP-coated catheters with MSCs expressed substantial CD31 and alpha-smooth muscle actin (α-SMA), displayed higher antithrombotic activity, as well as better endothelialization ability than those coated with all other materials. These data suggested that the implantation of FN-AuNP-coated catheter with MSCs could be a novel strategy for vascular biomaterials applications.

Advances in Waterborne Polyurethane-Based Biomaterials for Biomedical Applications

Polyurethane (PU) is one of the most popular synthetic elastomers and widely employed in biomedical fields owing to the excellent biocompatibility and hemocompatibility known today. In addition, PU is simply prepared and its mechanical properties such as durability, elasticity, elastomer-like character, fatigue resistance, compliance or tolerance in the body during the healing, can be mediated by modifying the chemical structure. Furthermore, modification of bulk and surface by incorporating biomolecules such as anticoagulant s or biorecognizable groups, or hydrophilic/hydrophobic balance is possible through altering chemical groups for PU structure. Such modifications have been designed to improve the acceptance of implant. For these reason, conventional solventborne (solvent-based) PUs have established the standard for high performance systems, and extensively used in medical devices such as dressings, tubing, antibacterial membrane , catheters to total artificial heart and blood contacting materials, etc. However, waterborne polyurethane (WPU) has been developed to improve the process of dissolving PU materials using toxic organic solvents, in which water is used as a dispersing solvent. The prepared WPU materials have many advantages, briefly (1) zero or very low levels of organic solvents, namely environmental-friendly (2) non-toxic, due to absence of isocyanate residues, and (3) good applicability caused by extensive structure/property diversity as well as an environment-friendly fabrication method resulting in increasing applicability. Therefore, WPUs are being in the spotlight as biomaterials used for biomedical applications . The purpose of this review is to introduce an environmental- friendly synthesis of WPU and consider the manufacturing process and application of WPU and/or WPU based nanocomposites as the viewpoint of biomaterials.

The effects of nanomaterials on blood coagulation in hemostasis and thrombosis

The blood coagulation balance in the organism is achieved by the interaction of the blood platelets (PLTs) with the plasma coagulation system (PCS) and the vascular endothelial cells. In healthy organism, these systems prevent thrombosis and, in events of vascular damage, enable blood clotting to stop bleeding. The dysregulation of hemostasis may cause serious thrombotic and/or hemorrhagic pathologies. Numerous engineered nanomaterials are being investigated for biomedical purposes and are unavoidably exposed to the blood. Also, nanomaterials may access vascular system after occupational, environmental, or other types of exposure. Thus, it is essential to evaluate the effects of engineered nanomaterials on hemostasis. This review focuses on investigations of nanomaterial interactions with the blood components involved in blood coagulation: the PCS and PLTs. Particular emphases include the pathophysiology of effects of nanomaterials on the PCS, including the kallikrein-kinin system, and on PLTs. Methods for investigating these interactions are briefly described, and a review of the most important studies on the interactions of nanomaterials with plasma coagulation and platelets is provided. WIREs Nanomed Nanobiotechnol 2017, 9:e1448. doi: 10.1002/wnan.1448 For further resources related to this article, please visit the WIREs website.

Biodegradable polymer scaffolds

Tissue engineering aims to repair the damaged tissue by transplantation of cells or introducing bioactive factors in a biocompatible scaffold. In recent years, biodegradable polymer scaffolds mimicking the extracellular matrix have been developed to promote the cell proliferation and extracellular matrix deposition. The biodegradable polymer scaffolds thus act as templates for tissue repair and regeneration. This article reviews the updated information regarding various types of natural and synthetic biodegradable polymers as well as their functions, physico-chemical properties, and degradation mechanisms in the development of biodegradable scaffolds for tissue engineering applications, including their combination with 3D printing.

Rheological and Mechanical Behavior of Silk Fibroin Reinforced Waterborne Polyurethane

Waterborne polyurethane (WPU) is a versatile and environment-friendly material with growing applications in both industry and academia. Silk fibroin (SF) is an attractive material known for its structural, biological and hemocompatible properties. The SF reinforced waterborne polyurethane (WPU) is a promising scaffold material for tissue engineering applications. In this work, we report synthesis and characterization of a novel nanocomposite using SF reinforced WPU. The rheological behaviors of WPU and WPU-SF dispersions with different solid contents were investigated with steady shear and dynamic oscillatory tests to evaluate the formation of the cross-linked gel structure. The average particle size and the zeta potential of WPU-SF dispersions with different SF content were examined at 25 °C to investigate the interaction between SF and WPU. FTIR, SEM, TEM and tensile testing were performed to study the effects of SF content on the structural morphology and mechanical properties of the resultant composite films. Experimental results revealed formation of gel network in the WPU dispersions at solid contents more than 17 wt %. The conjugate reaction between the WPU and SF as well as the hydrogen bond between them helped in dispersing the SF powder into the WPU matrix as small aggregates. Addition of SF to the WPU also improved the Young's modulus from 0.30 to 3.91 MPa, tensile strength from 0.56 to 8.94 MPa, and elongation at break from 1067% to 2480%, as SF was increased up to 5 wt %. Thus, significant strengthening and toughening can be achieved by introducing SF powder into the WPU formulations.

An in vivo study of a gold nanocomposite biomaterial for vascular repair

Currently vascular repairs are treated using synthetic or biologic patches, however these patches have an array of complications, including calcification, rupture, re-stenosis, and intimal hyperplasia. An active patch material composed of decellularized tissue conjugated to gold nanoparticles (AuNPs) was developed and the long term biocompatibility and cellular integration was investigated. Porcine abdominal aortic tissue was decellularized and conjugated with 100 nm gold nanoparticles (AuNP). These patches were placed over a longitudinal arteriotomy of the thoracic aorta in six pigs. The animals were monitored for six months. Gross, histological, and immunohistochemical analyses of the patches were performed after euthanasia. Grossly there was minimal scar tissue with the patches still visible on the outer surface of the vessel. The inner lumen was smooth with a seamless transition from patch to native tissue. Histology demonstrated infiltration of host cells into the patch material. The immunohistochemical results demonstrated an endothelial cell layer forming over the patch within the vessel. Smooth muscle cells were repopulating the biomaterial in all animals. These results demonstrated that the AuNP biomaterial patch integrated well with the host tissue and did not failed over the six month implantation time.

Fabrication, nanomechanical characterization, and cytocompatibility of gold-reinforced chitosan bio-nanocomposites

Chitosan, a naturally derived polymer represents one of the most technologically important classes of active materials with applications in a variety of industrial and biomedical fields. Gold nanoparticles (~32 nm) were synthesized via a citrate reduction method from chloroauric acid and incorporated in Chitosan matrix. Bio-nanocomposite films with varying concentrations of gold nanoparticles were prepared through solution casting process. Uniform distribution of gold nanoparticles was achieved throughout the chitosan matrix and was confirmed with SEM. Synthesis outcomes and prepared nanocomposites were characterized using SEM, TEM, EDX, SAED, UV-vis, XRD, DLS, and Zeta potential for their physical, morphological and structural properties. Nanoscale properties of materials under the influence of temperature were characterized through nanoindentation techniques. From quasi-static nanoindentation, it was observed that hardness and reduced modulus of the nanocomposites were increased significantly in direct proportion to the gold nanoparticle concentration. Gold nanoparticle concentration also showed positive impact on storage modulus and thermal stability of the material. The obtained films were confirmed to be biocompatible by their ability to support growth of human cells in vitro. In summary, the results show enhanced mechanical properties with increasing gold nanoparticle concentration, and provide better understanding of the structure-property relationships of such biocompatible materials for potential biomedical applications.

Biocompatibility and favorable response of mesenchymal stem cells on fibronectin-gold nanocomposites

A simple surface modification method, comprising of a thin coating with gold nanoparticles (AuNPs) and fibronectin (FN), was developed to improve the biocompatibility required for cardiovascular devices. The nanocomposites from FN and AuNPs (FN-Au) were characterized by the atomic force microscopy (AFM), UV-Vis spectrophotometry (UV-Vis), and Fourier transform infrared spectroscopy (FTIR). The biocompatibility of the nanocomposites was evaluated by the response of monocytes and platelets to the material surface in vitro. FN-Au coated surfaces demonstrated low monocyte activation and platelet activation. The behavior of human umbilical cord-derived mesenchymal stem cells (MSCs) on FN-Au was further investigated. MSCs on FN-Au nanocomposites particularly that containing 43.5 ppm of AuNPs (FN-Au 43.5 ppm) showed cell proliferation, low ROS generation, as well as increases in the protein expression levels of matrix metalloproteinase-9 (MMP-9) and endothelial nitric oxide synthase (eNOS), which may account for the enhanced MSC migration on the nanocomposites. These results suggest that the FN-Au nanocomposite thin film coating may serve as a potential and simple solution for the surface modification of blood-contacting devices such as vascular grafts.

Characterization of bionanocomposite scaffolds comprised of mercaptoethylamine-functionalized gold nanoparticles crosslinked to acellular porcine tissue

Bionanocomposite scaffolds comprised of nanomaterials and the extracellular matrix (ECM) of porcine diaphragm tissue capitalizes on the benefits of utilizing a natural ECM material, while also potentially enhancing physicomechanical properties and biocompatibility through nanomaterials. Gold nanoparticle (AuNP) bionanocomposite scaffolds were subjected to a number of characterization techniques to determine whether the fabrication process negatively impacted the properties of the porcine diaphragm tissue and whether the AuNP improved the properties of the tissue. Tensile testing and differential scanning calorimetry demonstrated that the bionanocomposite possessed improved tensile strength and thermal stability relative to natural tissue. The collagenase assay and Fourier transform infrared spectroscopy additionally confirmed that denaturation of the collagen of the ECM did not occur. The novel bionanocomposite scaffold possessed properties similar to commercially available scaffolds and will be further developed for soft tissue applications such as hernia repair through in vivo studies in an animal model.

Conjugation of gold nanoparticles to polypropylene mesh for enhanced biocompatibility

Polypropylene mesh materials have been utilized in hernia surgery for over 40 years. However, they are prone to degradation due to the body's aggressive foreign body reaction, which may cause pain or complications, forcing mesh removal from the patient. To mitigate these complications, gold nanomaterials were attached to polypropylene mesh in order to improve cellular response. Pristine samples of polypropylene mesh were exposed to hydrogen peroxide/cobalt chloride solutions to induce formation of surface carboxyl functional groups. Gold nanoparticles were covalently linked to the mesh. Scanning electron microscopy confirmed the presence of gold nanoparticles. Differential scanning calorimetry and mechanical testing confirmed that the polypropylene did not undergo any significantly detrimental changes in physicochemical properties. A WST-1 cell culture study showed an increase in cellularity on the gold nanoparticle-polypropylene mesh as compared to pristine mesh. This study showed that biocompatibility of polypropylene mesh may be improved via the conjugation of gold nanoparticles.

Mediation of the migration of endothelial cells and fibroblasts on polyurethane nanocomposites by the activation of integrin-focal adhesion kinase signaling

Model surfaces of polyurethane-gold nanocomposites (PU-Au) were used to examine cell behavior on nanophase-segregated materials. Previously we showed that endothelial cell (EC) migration on these materials was modulated by the PI3K/Akt/eNOS pathway. The present study, investigated the expressions of alpha5/beta3 (α5β3) integrin, focal adhesion kinase (FAK), and other downstream signal molecules such as the Rho family and matrix metalloproteinases 2 (MMP-2) induced by the materials in two different cells, that is bovine arterial endothelial cells (BAEC) and human skin fibroblasts (HSF). Both cells proliferated better on the more phase-separated PU-Au 43.5 ppm than on the less phase-separated controls (PU and PU-Au 174 ppm). On PU-Au 43.5 ppm, BAEC compared to HSF had denser actin fibers and were more extended. BAEC became rounded with Y-27632 treatment and shrunk with LY294002 treatment. Treatment by inhibitors only caused slight changes in HSF. The migration distance of BAEC on PU-Au 43.5 ppm was greater than that of HSF, and was significantly reduced by LY294002 or Y-27632 but not SU-1498. The expressions of p-FAK, p-RhoA, p-Rac/Cdc42, MMP2, and α5β3 integrin induced by PU-Au 43.5 ppm were more pronounced in BAEC versus HSF. Further enhancement in MMP2 and α5β3 integrin expressions by FAK-GFP transfection was more remarkable for cells on PU-Au 43.5 ppm. Our findings suggested that the integrin α5β3/FAK pathway may be induced by nanophase-separated materials in both ECs and fibroblasts to promote their proliferation/migration, while the crosstalk between the PI3K/Akt/eNOS pathway and FAK/Rho-GTPase activation may account for the greater effect in ECs than in fibroblasts.

Assessment of decellularized porcine diaphragm conjugated with gold nanomaterials as a tissue scaffold for wound healing

One million Americans suffer from chronic wounds every year with diabetics and older populations representing the majority. Mechanisms that may be responsible for the reduced healing response in these patients include reduction in growth factors or vascularization and an increase in free radical levels. The focus of this study was to develop a biocompatible gold/porcine diaphragm scaffold capable of sustaining fibroblast attachment and proliferation which was measured using viability and dsDNA assays. The free radical scavenging properties, as measured by ROS assays, were also investigated as a mechanism for improving the wound environment. Results indicated 69-89% viability for gold nanoparticle (AuNP) scaffolds and 51-74% for gold nanorod (AuNR) scaffolds as compared to 100% for decellularized scaffolds and 77% for crosslinked scaffolds. All scaffolds exhibited good cell attachment while AuNP-1X scaffolds showed the greatest cell proliferation with a 74% increase in dsDNA content from Day 3 to 7. AuNP-2X and AuNP-4X scaffolds generated higher levels of free radicals with AuNP-4X generating over twice as much as decellularized scaffolds. This study suggests the capability for gold/porcine diaphragm scaffolds to enhance cell proliferation while the modification of free radical generation appears to be dependent on nanomaterial shape and concentration.

The biocompatibility and antimicrobial activity of nanocomposites from polyurethane and nano silicate platelets

Nanocomposites from a polyether-type waterborne polyurethane (PU) and 0.1 wt % of silicate materials were prepared. The individual silicate materials were natural clays (montmorillonite and mica), their exfoliated clays [nano silicate platelets (NSP) and nano mica platelets], and NSP modified with C18 fatty amine (NSP-S). The physico-chemcical properties and antimicrobial activity of the nanocomposites were characterized in vitro. The biostability and biocompatibility of the nanocomposites were evaluated in vivo. The nanocomposites exhibited various surface morphologies with phase separation of hard and soft domains in nanometric scales. The nanocomposite containing NSP (PU-NSP) showed better endothelial cell attachment and gene expression. The better biocompatibility of PU-NSP and PU-NSP-S was evidenced by the lower thickness of foreign body capsules in rat subcutaneous implantation. PU-NSP had the least surface degradation in vivo as demonstrated by the electron microscopy and infrared spectroscopy. This may be associated with the different surface structure. PU-NSP and PU-NSP-S showed strong bacteriostatic effects, which suggested that the nano clay in the polymer matrix may still interact with the microbes.

Assessment of the biocompatibility of two novel, bionanocomposite scaffolds in a rodent model

Two novel, bionanocomposite scaffolds were evaluated in a rodent model over the course of three months to determine whether these scaffolds possessed adequate biocompatibility characteristics to warrant further evaluation as possible tissue reconstruction scaffolds. These bionanocomposite scaffolds were comprised of amine-functionalized gold nanoparticles (AuNP) or silicon carbide nanowires (SiCNW) crosslinked to an acellular porcine diaphragm tendon. It was hypothesized that the addition of nanomaterials to the porcine tendon would also improve its biocompatibility by imparting a nanostructured surface. As early as seven days after implantation, both types of bionanocomposite scaffolds displayed evidence of granulation tissue and the beginning of scaffold remodeling with new collagen deposited by the host, and by ninety-seven days the bionanocomposite scaffolds were completely remodeled with no evidence of any adverse host tissue reaction or scar tissue formation. The AuNP bionanocomposite scaffolds exhibited accelerated scaffold remodeling compared to the SiCNW scaffolds.

Characterization and biocompatibility of chitosan nanocomposites

Chitosan nanocomposites were prepared from chitosan and gold nanoparticles (AuNPs) or silver nanoparticles (AgNPs) of ∼5 nm size. Transmission electron microscopy (TEM) showed the NPs in chitosan did not aggregate until higher concentrations (120-240 ppm). Atomic force microscopy (AFM) demonstrated that the nanocrystalline domains on chitosan surface were more evident upon addition of AuNPs (60 ppm) or AgNPs (120 ppm). Both nanocomposites showed greater elastic modulus, higher glass transition temperature (T(g)) and better cell proliferation than the pristine chitosan. Additionally, chitosan-Ag nanocomposites had antibacterial ability against Staphylococcus aureus. The potential of chitosan-Au nanocomposites as hemostatic wound dressings was evaluated in animal (rat) studies. Chitosan-Au was found to promote the repair of skin wound and hemostasis of severed hepatic portal vein. This study indicated that a small amount of NPs could induce significant changes in the physicochemical properties of chitosan, which may increase its biocompatibility and potential in wound management.

Dynamic and cellular interactions of nanoparticles in vascular-targeted drug delivery

Vascular-targeted drug delivery systems could provide more efficient and effective pharmaceutical interventions for treating a variety of diseases including cardiovascular, pulmonary, inflammatory, and malignant disorders. However, several factors must be taken into account when designing these systems. The diverse blood hemodynamics and rheology, and the natural clearance process that tend to decrease the circulation time of foreign particles all lessen the probability of successful carrier interaction with the vascular wall. An effective vascular-targeted drug delivery system must be able to navigate through the bloodstream while avoiding immune clearance, attach to the vascular wall, and release its therapeutic cargo at the intended location. This review will summarize and analyze current literature reporting on (1) nanocarrier fabrication methods and materials that allow for optimum therapeutic encapsulation, protection, and release; (2) localization and binding dynamics of nanocarriers as influenced by hemodynamics and blood rheology in medium-to-large vessels; (3) blood cells' responses to various types of nanocarrier compositions and its effects on particle circulation time; and (4) properties that affect nanocarrier internalization at the target site.

Dynamic and cellular interactions of nanoparticles in vascular-targeted drug delivery (review)

Vascular-targeted drug delivery systems could provide more efficient and effective pharmaceutical interventions for treating a variety of diseases including cardiovascular, pulmonary, inflammatory, and malignant disorders. However, several factors must be taken into account when designing these systems. The diverse blood hemodynamics and rheology, and the natural clearance process that tend to decrease the circulation time of foreign particles all lessen the probability of successful carrier interaction with the vascular wall. An effective vascular-targeted drug delivery system must be able to navigate through the bloodstream while avoiding immune clearance, attach to the vascular wall, and release its therapeutic cargo at the intended location. This review will summarize and analyze current literature reporting on (1) nanocarrier fabrication methods and materials that allow for optimum therapeutic encapsulation, protection, and release; (2) localization and binding dynamics of nanocarriers as influenced by hemodynamics and blood rheology in medium-to-large vessels; (3) blood cells' responses to various types of nanocarrier compositions and its effects on particle circulation time; and (4) properties that affect nanocarrier internalization at the target site.

The use of air plasma in surface modification of peripheral nerve conduits

Surface modification is a conventional approach in biomaterials development, but most of the modification processes are intricate and time inefficient. In this study, a convenient open air plasma treatment was employed to modify the surface of poly(d,l-lactide) (PLA). Chitosan and fibroblast growth factor 1 (FGF1) were sequentially grafted with the assistance of open air plasma treatment onto the PLA nerve conduits with designed micropores and surface microgrooves. Grafting of these components was verified by electron spectroscopy for chemical analysis. The modified nerve conduits showed enhanced ability in the repair of 10-mm sciatic nerve transection defects in rats. The sequential air plasma treatment can be a convenient way to introduce biocompatible (e.g., chitosan) and bioactive components (e.g., growth factors) onto the surface of biomaterials.

The response of endothelial cells to polymer surface composed of nanometric micelles

The response of endothelial cells (ECs) to a polyurethane (PU) characteristic of surface micelles ( approximately 89nm in diameter) and two novel nanocomposites (PU-Au) and (PU-Ag) containing smaller surface micelles ( approximately 14-22nm in diameter) was investigated. The molecular mechanism by which ECs reacted to nanometric surface micelles was examined. On PU-Au and PU-Ag, cell migration rate was promoted. This was accompanied by the upregulation of endothelial nitric oxide synthase (eNOS) and phosphorylated-Akt (p-Akt) expression. The induced eNOS and p-Akt expression was inhibited by LY294002, indicating that the effect of nanocomposites could be attributed to the PI3K pathway. An elevation of intracellular calcium concentration was noted. Additionally, more actin fibers were induced by PU-Au and PU-Ag. Reduction of actin expression upon addition of Y-27632 (an inhibitor of Rho-GTPase) and SU-1498 (an inhibitor of VEGF-R2) was observed. It was concluded that the nanometric micelles on PU surface may interact with ECs and accelerate their migration by increasing cytoplasmic Ca(2+) and stimulating the PI3K/Akt/eNOS signaling pathway.

The behavior of endothelial cells on polyurethane nanocomposites and the associated signaling pathways

A series of nanocomposites from polyurethane (PU) incorporated with various low concentrations (17.4-174 ppm) of gold nanoparticles (approximately 5 nm) (denoted "PU-Au") were used as a model system to study the mechanisms that influenced endothelial cell (EC) migration on biomaterial surfaces. The migration rate of ECs on the PU-Au nanocomposites was determined by a real-time image system. It was found that ECs had the highest migration rate on the nanocomposite containing 43.5 ppm of gold ("PU-Au 43.5 ppm"). The high EC migration rate was associated with increased levels of endothelial nitric oxide synthase (eNOS) and phosphorylated-Akt (p-Akt) expressed by ECs cultured on PU-Au. The inductions of both eNOS and p-Akt on PU-Au were abolished by the addition of LY294002 (PI3K inhibitor), suggesting that these cellular events may be regulated through the PI3K signaling pathway. Using a biotinylated VEGF-165 that recognizes VEGF receptors and by FACS analysis, slightly higher expression of VEGF receptors for ECs on PU-Au was also demonstrated. Phalloidin staining showed that actin appeared as a circumferential band surrounding each cell on tissue culture polystyrene, whereas on PU-Au, especially on PU-Au 43.5 ppm, the cells had their margin spread out and extend processes with stress fibers in the protruding lamellipodia. Moreover, the higher EC migration rate on PU-Au 43.5 ppm was suppressed by LY294002. The higher protein expression of focal adhesion kinase (FAK) on PU-Au 43.5 ppm was observed in FAK-GFP transfected ECs. It was concluded that PU-Au nanocomposites activated FAK and the PI3K/Akt signaling pathway in ECs, leading to proliferation and migration of ECs on these surfaces.

Biostability and biocompatibility of poly(ester urethane)-gold nanocomposites

Nanocomposites from a polyester-type water-borne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. A previous study has shown that the Au nanoparticles could induce surface morphological transformations in the PU (e.g. the mesophase transition from hard lamellae to soft micelles), which modify the physicochemical properties of the PU as well as the fibroblast response to the PU. The current study focused on the biostability and biocompatibility of the nanocomposites. The nanocomposites were characterized by transmission electron microscopy and X-ray photoelectron spectroscopy, and their oxidative stability and free radical scavenging ability were tested. The inflammatory response was evaluated by monocyte activation in vitro and rat subcutaneous implantation in vivo. It was found that the nanocomposites containing 43.5-65 ppm of Au had the least monocyte activation and tissue reactions. PU and the nanocomposites were rather resistant to oxidative degradation in vitro and biodegradation in vivo. The nanocomposites exhibited greater free radical scavenging abilities than the original PU. Based on the above results, the significantly enhanced biocompatibility of the PU-Au nanocomposites with 43.5-65 ppm of gold over the original PU appeared to be a result of the extensively modified surface morphology and greater free radical scavenging ability, instead of due to the difference in biostability.

Fluorescence and electrochemiluminescence of luminol-reduced gold nanoparticles: photostability and platform effect

Water-soluble gold nanoparticles (AuNPs) capped with both fluorescent (FL) 3-aminophthalate (APA) and electrochemiluminescent (ECL) luminol molecules were described in our previous work. The synthetic and characteristic efforts of these functionalized AuNPs (lumAuNPs) were subsequently followed by investigations of their FL and ECL properties, as reported in the present work. It was observed that the FL intensity of a single gold nanoparticle was 70 times brighter than that of one free APA molecule, even though 91% of the FL emission of APA molecules on the surfaces of AuNPs was inhibited by gold cores through both intra- and interparticle quenching effects. Moreover, the photobleaching of surface-bound APA molecules was found to be dramatically inhibited compared with that of free ones in carbonate buffer. The improvement of photostability was attributed to the reactive AuNPs which acted as radical scavengers to protect the surface-bound APA molecules from oxidation by carbonate radicals. Furthermore, as-prepared lumAuNPs could react with cysteine to produce strong electrochemiluminescence, which was enhanced by 20-fold compared with that in the absence of cysteine. The experimental results suggested that luminol and cysteine were coadsorbed on the gold nanoparticle platform via Au-N and Au-S interactions, respectively. The shorter distance between reactant molecules by overcoming the electrostatic repulsion, that is, platform effect, was proposed to be responsible for the ECL enhancement. Combined with the biocompatibility of gold cores, the brighter FL emission, enhanced photostability, and stronger ECL intensity may make as-prepared lumAuNPs promising FL and ECL biomarkers for their applications in biosensors and bioimaging.