Effect of chitosan molecular weight and deacetylation degree on hemostasis

Chitosan particles embedded bacterial nanocellulose flat membrane for hemodialysis

The development of bio-based hemodialysis membranes continues to be a challenge. Bacterial nanocellulose (BNC) membranes show potential in hemodialysis but can hardly retain beneficial proteins. Here, chitosan particles/bacterial nanocellulose (CSP/BNC) membranes were designed to efficiently remove uremic toxins and retain beneficial proteins. First, CSPs were synthesized in situ within a BNC membrane by ionic gelation following negative pressure impregnation. Subsequently, these membranes were thoroughly characterized. Compared with the BNC membrane, the pore volume and pore size of the 3 % CSP/BNC membrane decreased by 42.2 % and 32.1 %, respectively. The increased 22.2 times of Young's modulus and 88.9 % of tensile strength in the 3 % CSP/BNC membrane confirmed enhanced mechanical property. The sieving coefficient of bovine serum albumin decreased to 0.05 ± 0.03 in the 3 % CSP/BNC membrane. Moreover, the CSP/BNC membrane exhibited good hemocompatibility and cytocompatibility. The simulated dialysis results showed that the 3 % CSP/BNC membrane exhibited high clearance of urea (16.37 %/cm2) and lysozyme (3.54 %/cm2), while efficiently retaining bovine serum albumin (98.04 %/cm2). This is the first demonstration of the construction of a BNC-based hemodialysis membrane with in situ CSP formation to effectively regulate the pore properties of the membrane, making the CSP/BNC membrane a promising candidate for hemodialysis applications.

Chitosan-based dressing for management of palatal donor site: A randomized clinical trial

AIMS

This study aimed to evaluate the effectiveness of a chitosan-based dressing (CD) in achieving early wound healing and hemostasis at palatal donor sites in patients undergoing free gingival graft (FGG) surgery.

METHODS

Thirty-two patients requiring FGG were treated in this randomized controlled clinical trial. Complete epithelialization (CE) and color match (CM) at donor sites were assessed by a blinded examiner on postoperative days 7, 14, 21, and 28. Donor sites were compressed for 2 min with wet gauze (WG) alone in control group (CG) or WG + CD in test group (TG) immediately after graft harvesting, and immediate bleeding (IB) was recorded (yes/no). Delayed bleeding (DB) (for 1 week), and number of analgesic tablets consumed, and VAS scores for pain (for 2 weeks) were recorded by patient every day.

RESULTS

Twenty-eight patients (14 in each group) were included in final analysis. The prevalence of CE (at weeks 2 and 3) and VAS scores for CM scores were higher in TG but the intergroup differences were statistically significant only for CM (at week 4). Number of patients exhibiting IB and DB was significantly fewer in the TG (p < .05). Although average pain scores and analgesic consumption were higher in TG up to 5 days, differences between two groups were not statistically significant at any time point.

CONCLUSION

Our data suggests that the application of CD increased re-epithelialization and accelerated wound healing process, although it did not reach statistical significance. Moreover, CD was found to significantly reduce bleeding complications, but it did not decrease the pain levels.

Sterilized Polyhexanide-Releasing Chitosan Membranes with Potential for Use in Antimicrobial Wound Dressings

Wound infection is a common complication of chronic wounds. It can impair healing, which may not occur without external help. Antimicrobial dressings (AMDs) are a type of external help to infected chronic wounds. In this study, highly porous membranes made of only chitosan and containing the antiseptic polyhexanide (poly(hexamethylene biguanide); PHMB) were prepared by cryogelation, aiming to be used in AMDs. These membranes exhibited a water swelling capacity of 748%, a water drop penetration time of 11 s in a dry membrane and a water vapor transmission rate of 34,400 g H2O/m2/24 h when in contact with water. The best drug loading method involved simultaneous loading by soaking in a PHMB solution and sterilization by autoclaving, resulting in sterilized, drug-loaded membranes. When these membranes and a commercial PHMB-releasing AMD were assayed under the same conditions, albeit far from the in vivo conditions, their drug release kinetics were comparable, releasing PHMB for ca. 6 and 4 h, respectively. These membranes exhibited high antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa, which are bacterial species commonly found in infected wounds and blood clotting activity. The obtained results suggest that these membranes may have potential for use in the development of AMDs.

A Direct Comparison of Peptide Drug Delivery Systems Based on the Use of Hybrid Calcium Phosphate/Chitosan Nanoparticles versus Unmixed Calcium Phosphate or Chitosan Nanoparticles In Vitro and In Vivo

Nanocarriers provide a number of undeniable advantages that could improve the bioavailability of active agents for human, animal, and plant cells. In this study, we compared hybrid nanoparticles (HNPs) consisting of a calcium phosphate core coated with chitosan with unmixed calcium phosphate (CaP) and chitosan nanoparticles (CSNPs) as carriers of a model substrate, enalaprilat. This tripeptide analog is an inhibitor of angiotensin-converting enzyme and was chosen by its ability to lower intraocular pressure (IOP). In particular, we evaluated the physicochemical characteristics of the particles using dynamic light scattering (DLS) and scanning electron microscopy (SEM) and analyzed their ability to incorporate and release enalaprilat. HNPs exhibited the highest drug loading capacity and both HNPs and CSNPs demonstrated slow drug release. The comparison of the physiological effects of enalaprilat-loaded CaP particles, HNPs, and CSNPs in terms of their impact on IOP in rabbits revealed a clear advantage of hybrid nanoparticles over both inorganic and chitosan nanoparticles. These results could have important mechanistic implications for developing nano-based delivery systems for other medical, veterinary, and agricultural applications.

Chitosan-based hydrogel wound dressing: From mechanism to applications, a review

As promising biomaterials, hydrogels are widely used in the medical engineering field, especially in wound repairing. Compared with traditional wound dressings, such as gauze and bandage, hydrogel could absorb and retain more water without dissolving or losing its three-dimensional structure, thus avoiding secondary injury and promoting wound healing. Chitosan and its derivatives have become hot research topics for hydrogel wound dressing production due to their unique molecular structure and diverse biological activities. In this review, the mechanism of wound healing was introduced systematically. The mechanism of action of chitosan in the first three stages of wound repair (hemostasis, antimicrobial properties and progranulation), the effect of chitosan deacetylation and the molecular weight on its performance are analyzed. Additionally, the recent progress in intelligent and drug-loaded chitosan-based hydrogels and the features and advantages of chitosan were discussed. Finally, the challenges and prospects for the future development of chitosan-based hydrogels were discussed.

Different amount of carboxyl-aldehyde fractionated nanofibril cellulose and main characteristics of chitosan, gelatin, alginate added composites

In this research, two different types of nanofibrillated celluloses (NFCs) having different amounts of aldehyde and carboxyl groups were mixed with chitosan (CH), gelatin (GL), and alginate (AL) with different mixing ratios to produce biocomposite aerogels. There was no related study in the literature about producing aerogels with the addition of NC and mentioning biopolymers in addition to the effect of carboxyl and aldehyde fraction of the main matrix NC on composite properties. For this purpose, the main aim of this study was to investigate how carboxyl and aldehyde groups affect the basic characteristics of NFC-biopolymer based materials addition to efficiency of biopolymer amount in main matrix. Even after preparing homogenous NC-biopolymer compositions at 1 % concentration with varied proportions (75 %-25 %, 50 %-50 %, 25 %-75 %, 100 %), aerogels were still made using the fundamentally easy lyophilization procedure. Porosity values for NC-Chitosan (NC/CH) based aerogels range from 97.85 to 99.84 %, whereas those made from NC-Gelatin (NC/GL) and NC-Alginate (NC-AL) have values of 99.2-99.8 % and 98.47 to 99.7 %, respectively. In addition, densities were determined in the range of 0.01 g/cm³ for both NC-CH and NC-GL composites, but higher values were obtained in ranged between 0.01 and 0.03 g/cm³ for NC-AL samples. The crystallinity index values showed a decreasing trend with the addition of biopolymers into NC composition. SEM images showed that all materials have a porous micro structure with different size pores and homogenous surface topography. As a result of the specified tests, these materials can be used in many different industrial applications, such as dust collectors, liquid adsorbers, specific material for packaging and medical materials.

Films composed of white angico gum and chitosan containing chlorhexidine as an antimicrobial agent

Anadenanthera colubrina, popularly known as white angico, is a species extensively cultivated in Brazil, mainly in the cerrado region, including the state of Piauí. This study examines the development of films composed of white angico gum (WAG) and chitosan (CHI) and containing chlorhexidine (CHX), an antimicrobial agent. The solvent casting method was used to prepare films. Different combinations and concentrations of WAG and CHI were used to obtain films with good physicochemical characteristics. Properties such as the in vitro swelling ratio, the disintegration time, folding endurance, and the drug content were determined. The selected formulations were characterised by scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction, and the CHX release time and antimicrobial activity were evaluated. CHX showed a homogenous distribution in all CHI/WAG film formulations. The optimised films showed good physicochemical properties with 80% CHX release over 26 h, which is considered promising for local treatment of severe lesions in the mouth. Cytotoxicity tests of the films did not show toxicity. The antimicrobial and antifungal effects were very effective against the tested microorganisms.

Polysaccharide-Based Multifunctional Hydrogel Bio-Adhesives for Wound Healing: A Review

Wound healing is a long-term and complex biological process that involves multiple hemostasis, inflammation, proliferation, and remodeling stages. In order to realize comprehensive and systematic wound management, appropriate wound treatment bio-adhesives are urgently needed. Hydrogel bio-adhesives have excellent properties and show unique and remarkable advantages in the field of wound management. This review begins with a detailed description of the design criteria and functionalities of ideal hydrogel bio-adhesives for wound healing. Then, recent advances in polysaccharide-based multifunctional hydrogel bio-adhesives, which involve chitosan, hyaluronic acid, alginate, cellulose, dextran, konjac glucomannan, chondroitin sulfate, and other polysaccharides, are comprehensively discussed. Finally, the current challenges and future research directions of polysaccharide-based hydrogel bio-adhesives for wound healing are proposed to stimulate further exploration by researchers.

Biomaterials Based on Chitosan and Its Derivatives and Their Potential in Tissue Engineering and Other Biomedical Applications-A Review

In the times of dynamically developing regenerative medicine, more and more attention is focused on the use of natural polymers. This is due to their high biocompatibility and biodegradability without the production of toxic compounds, which means that they do not hurt humans and the natural environment. Chitosan and its derivatives are polymers made most often from the shells of crustaceans and are biodegradable and biocompatible. Some of them have antibacterial or metal-chelating properties. This review article presents the development of biomaterials based on chitosan and its derivatives used in regenerative medicine, such as a dressing or graft of soft tissues or bones. Various examples of preparations based on chitosan and its derivatives in the form of gels, films, and 3D structures and crosslinking products with another polymer are discussed herein. This article summarizes the latest advances in medicine with the use of biomaterials based on chitosan and its derivatives and provides perspectives on future research activities.

A Prospective Multicenter Randomized Controlled Trial to Evaluate the Efficacy of Chitosan Hydrogel Paste in Comparison to Commercial Hydroactive Gel as a Wound Bed Preparation

Background This clinical trial aimed to evaluate the clinical efficacy of chitosan derivative hydrogel paste (CDHP) as a wound bed preparation for wounds with cavities.

Methods This study enrolled 287 patients, with 143 patients randomized into the CDHP group (treatment) and 144 patients randomized into the commercial hydroactive gel (CHG) group (control). The granulation tissue, necrotic tissue, patient comfort, clinical signs, symptoms, and patient convenience during the application and removal of the dressing were assessed.

Results The study was completed by 111 and 105 patients from the treatment and control groups, respectively. Both groups showed an increasing mean percentage of wound granulation over time when the initial wound size and comorbidity were adjusted (F(10,198) = 4.61; p < 0.001), but no significant difference was found between the groups (F(1,207) = 0.043; p = 0.953). The adjusted mean percentage of necrotic tissue of both groups showed a significant decrease over time (F(10,235) = 5.65; p <0.001), but no significant differences were found between the groups (F (1,244) = 0.487; p = 0.486).

Conclusion CDHP is equivalent to CHG and is an alternative in wound management and wound bed preparation for wounds with cavities.

A poloxamer/hyaluronic acid/chitosan-based thermosensitive hydrogel that releases dihydromyricetin to promote wound healing

Wounds caused by accidents and surgery are inevitable, and inflammation and microbial infection during the healing process are serious clinical challenges, resulting in slow wound healing. In this study, we created a 37 °C-sensitive hydrogel using poloxamer, chitosan and hyaluronic acid, loaded with the active substance dihydromyricetin, and further evaluated its potential for wound healing. The hydrogels were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis for their micromorphological structure, characteristic functional groups, crystal structure and thermal stability, and in vitro drug release assays showed that the hydrogel could slowly release dihydromyricetin. In addition, the hydrogels were found to exhibit good biocompatibility and significant in vitro antioxidant and anti-inflammatory activity according to hemolysis, in vitro antioxidant and anti-inflammatory tests. Methyl thiazolyl tetrazole cytotoxicity tests verified that the film was non-toxic to human keratinocyte (HaCaT) cells, while in vivo experiments showed that this hydrogel could promote skin repair by promoting skin-associated growth factor expression and inhibiting nuclear factor kappa B-mediated cellular inflammatory factors. These results demonstrated that the temperature-sensitive hydrogels loaded with dihydromyricetin could serve as potential candidates for guided skin repair.

High-Power Laser Deposition of Chitosan Polymers: Medical and Environmental Applications

High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.

Application of chitosan nanoparticles in skin wound healing

The rising prevalence of impaired wound healing and the consequential healthcare burdens have gained increased attention over recent years. This has prompted research into the development of novel wound dressings with augmented wound healing functions. Nanoparticle (NP)-based delivery systems have become attractive candidates in constructing such wound dressings due to their various favourable attributes. The non-toxicity, biocompatibility and bioactivity of chitosan (CS)-based NPs make them ideal candidates for wound applications. This review focusses on the application of CS-based NP systems for use in wound treatment. An overview of the wound healing process was presented, followed by discussion on the properties and suitability of CS and its NPs in wound healing. The wound healing mechanisms exerted by CS-based NPs were then critically analysed and discussed in sections, namely haemostasis, infection prevention, inflammatory response, oxidative stress, angiogenesis, collagen deposition, and wound closure time. The results of the studies were thoroughly reviewed, and contradicting findings were identified and discussed. Based on the literature, the gap in research and future prospects in this research area were identified and highlighted. Current evidence shows that CS-based NPs possess superior wound healing effects either used on their own, or as drug delivery vehicles to encapsulate wound healing agents. It is concluded that great opportunities and potentials exist surrounding the use of CSNPs in wound healing.

Synergistic performance of collagen-g-chitosan-glucan fiber biohybrid scaffold with tunable properties

Hybrid biocomposite scaffolds (HBS) that serve as a carrier for cell proliferation and differentiation are increasingly used for tissue regeneration. 3D hybrid scaffold based on collagen-grafted-chitosan-glucan fiber (CO-g-CGF-HBS) was prepared by freeze-drying technique. The swelling percentage, hydrolytic stability, and modulus of elasticity of HBS were enhanced after the chemical modification of CO with CGF. Pore size and porosity of HBS were decreased with an increased CGF ratio. HBS exhibits a higher reduction rate against different types of bacteria compared with a control sample. Thus, chemical modification of CO with different ratios of CGF significantly improved the physicochemical, antibacterial properties of HBS.

Antifungal Activity of Squid Pen Chitosan Nanoparticles against Three Fungal Pathogens in Various Citrus Fruits In Vitro and In Vivo

Fungal infections have been considered a primary cause of the postharvest losses of citrus fruits. Therefore, it is necessary to find low-cost and high antifungal activity materials for preventing the decay of citrus fruits after harvest. In this study, squid chitosan nanoparticles (SCNs) were prepared from squid pen chitosan and used as a biofungicide against three citrus fungal pathogens in both in vitro and in vivo evaluations. The prepared SCNs had a mean size of ca. 56 nm and a high zeta potential of +98.7 eV with a narrow size distribution. At a range of 50–250 ppm, the SCN concentration of 200 ppm exhibited the highest activity in totally inhibiting the growth of Lasiodiplodia pseudotheobromae, Alternaria alternate, and Penicillium digitatum in in vitro tests where these fungi were isolated from symptomatic fruits and identified. Furthermore, after 12 days of incubation at 30 ± 0.2 °C and high relative humidity in in vivo studies, the infection area of the sample treated at 250 ppm completely suppressed fruit disease symptoms. The results demonstrate that prepared SCNs efficiently control postharvest citrus fruit diseases. These findings recommend applying SCNs as a potential candidate for citrus fruit storage.

The potential of chitosan-based haemostats for use in neurosurgical setting - Literature review

Haemorrhage is a major nuance in neurosurgery since blood can distort the surgeon's field of view and increase the risk of post-operative complications. Currently a variety of commercially available haemostats have been approved for use in neurosurgery, but they have caveats to their use in the brain, including, localised tissue compression, neural toxicity, induce immune reaction or form thrombus within the vessel. Thus, there is a need for haemostats that are efficacious and safe for application on brain and spinal tissue. Chitosan is a naturally occurring bio-polymer that is found on the exoskeleton of arthropods and the cell wall of fungi. Chitosan has been shown to accelerate haemostasis through a myriad of physiological pathways. These findings have led to the development of multiple chitosan-based haemostats, for use in peripheral human tissue. Although, clinical data regarding the use of chitosan-based haemostats in the brain is lacking, a range on in vivo studies have proven chitosan to be efficacious and safe in managing neurosurgical bleeds. Similarly, literature comparing chitosan-based haemostats with commercial haemostats used commonly in neurosurgery, have all demonstrated chitosan to be the superior agent. Additionally, clinical trials of chitosan-based haemostat used in peripheral tissue have all demonstrated chitosan to be safe for human use. The marriage of these findings indicates that the safety and superior efficacy of chitosan-based haemostat, makes it a potentially suitable haemostat for use in neurosurgical setting. However, further research pertaining to the clinical use of chitosan-based haemostat within the central nervous system needs to be conducted.

Advanced bioactive nanomaterials for biomedical applications

Bioactive materials are a kind of materials with unique bioactivities, which can change the cellular behaviors and elicit biological responses from living tissues. Bioactive materials came into the spotlight in the late 1960s when the researchers found that the materials such as bioglass could react with surrounding bone tissue for bone regeneration. In the following decades, advances in nanotechnology brought the new development opportunities to bioactive nanomaterials. Bioactive nanomaterials are not a simple miniaturization of macroscopic materials. They exhibit unique bioactivities due to their nanoscale size effect, high specific surface area, and precise nanostructure, which can significantly influence the interactions with biological systems. Nowadays, bioactive nanomaterials have represented an important and exciting area of research. Current and future applications ensure that bioactive nanomaterials have a high academic and clinical importance. This review summaries the recent advances in the field of bioactive nanomaterials, and evaluate the influence factors of bioactivities. Then, a range of bioactive nanomaterials and their potential biomedical applications are discussed. Furthermore, the limitations, challenges, and future opportunities of bioactive nanomaterials are also discussed.

Effects of degree of deacetylation on hemostatic performance of partially deacetylated chitin sponges

Chitin/chitosan hemostatic materials have long been studied for uncontrolled hemorrhage, an urgent clinical problem due to severe blood-vessel damage or hemophilia. As one of the basic structural parameters of chitin, the degree of deacetylation (DD) significantly affects the material's physical, chemical, as well as biological properties. In this study, partially deacetylated chitins with a wide range of DD (23-81%) were prepared by homogeneous deacetylation, and sponges with these various chitins were fabricated by freeze-drying to study the effects of DD on their hemostatic properties. Among all sponge samples, the chitosan sponge with a DD of 48% showed the highest water absorption, whole blood adsorption, RBC adsorption rate, and the best hemostatic performance in an uncontrolled bleeding model of the rat femoral artery, demonstrating that a certain proportion of acetyl amino and amino groups could also activate the coagulation system and promote the adhesion of platelet and erythrocyte.

Highly Efficient Synthesis of Type B Gelatin and Low Molecular Weight Chitosan Nanoparticles: Potential Applications as Bioactive Molecule Carriers and Cell-Penetrating Agents

Gelatin and chitosan nanoparticles have been widely used in pharmaceutical, biomedical, and nanofood applications due to their high biocompatibility and biodegradability. This study proposed a highly efficient synthesis method for type B gelatin and low-molecular-weight (LMW) chitosan nanoparticles. Gelatin nanoparticles (GNPs) were synthesized by the double desolvation method and the chitosan nanoparticles (CNPs) by the ionic gelation method. The sizes of the obtained CNPs and GNPs (373 ± 71 nm and 244 ± 67 nm, respectively) and zeta potential (+36.60 ± 3.25 mV and −13.42 ± 1.16 mV, respectively) were determined via dynamic light scattering. Morphology and size were verified utilizing SEM and TEM images. Finally, their biocompatibility was tested to assure their potential applicability as bioactive molecule carriers and cell-penetrating agents.

Epinephrine-entrapped chitosan nanoparticles covered by gelatin nanofibers: A bi-layer nano-biomaterial for rapid hemostasis

Uncontrolled hemorrhage accounts for significant death risk both in trauma and surgery. Various bleeding control techniques have been emerged to augment hemostasis, which still has several limitations and drawbacks. In this study, epinephrine-entrapped chitosan nanoparticles were electrosprayed on a base pad and covered by a gelatin nanofiber layer (E-CS-Gl. Physico-chemical characteristics, hemocompatibility, cytotoxicity, and blood coagulation tests were studied in-vitro, and blood coagulation and hemostasis potential tests were performed in-vivo. The in-vitro results showed that the prepared nano-biomaterial is cytocompatible against HuGu cells. Also, hemocompatibility studies showed that PT and aPTT times did not change in comparison with the controls. Further blood coagulation study indicated that E-CS-Gl provides an ultimate interface to induce red blood cell absorption and aggregation, resulting in augmented blood coagulation. E-CS-Gl also caused rapid clotting in rat models of ruptured femoral artery and liver compared to controls. Findings exhibited that E-CS-Gl is a safe and effective hemostatic agent and provides a new approach for fast and safe hemorrhage control.

Determination of indicators allowing to evaluating the hemostatic activity of chitosan without a biological experiment

The biopolymer chitosan is widely used for the development of local hemostatic agents. However, the physicochemical parameters of chitosan that determine its hemostatic properties have not yet been determined. Standard quality control of chitosan-containing raw materials and medical products on its basis do not allow us to make a conclusion about the effectiveness of their use for stopping bleeding. The most reliable method for assessing hemostatic activity remains in vivo experiment on large animals. The aim of this study was to determine additional physicochemical parameters of chitosan, which would make it possible to predict its hemostatic activity without conducting a biological experiment. In this work, using the methods of nuclear magnetic resonance spectroscopy, spectrophotometry and viscometry, it has been shown that the ability to initiate hemostasis is depending of the molecular weight and degree of deacetylation of chitosan, but not enough linearly. The hemostatic properties in vitro increases in a series of samples with a relatively constant molecular weight with an increase in the degree of deacetylation. As well as in a series with the same degree of deacetylation with an increase in molecular weight. However, at molecular weight values more than 300 kDa, the viscosity of the polymer causes the opposite effect: with an increase in the degree of deacetylation, the hemostatic activity decreases. The best ability to initiate hemostasis have chitosan samples with a degree of deacetylation of 90.0%–97.4% and molecular weight 145.7–284.7 kDa, in which at pH of solution close to physiological, a significant part of the molecules transitioned from conformation state rigid rod to state globule. It was accompanied by an abrupt change in light transmission of the solution. It was concluded, that it is possible to study conformational states by spectrophotometry to assess the hemostatic activity of chitosan samples without performing biological experiment.

A review on chitosan and chitosan-based bionanocomposites: Promising material for combatting global issues and its applications

Over the last few years, several attempts have been made to replace petrochemical products with renewable and biodegradable components. The most challenging part of this approach is to obtain bio-based materials with properties and functions equivalent to those of synthetic products. Various naturally occurring polymers such as starch, collagen, alginate, cellulose, and chitin represent attractive candidates as they could reduce dependence on synthetic products and consequently positively impact the environment. Chitosan is also a unique bio-based polymer with excellent intrinsic properties. It is known for its anti-bacterial and film-forming properties, has high mechanical strength and good thermal stability. Nanotechnology has also applied chitosan-based materials in its most recent achievements. Therefore, numerous chitosan-based bionanocomposites with improved physical and chemical characteristics have been developed in an eco-friendly and cost-effective approach. This review discusses various sources of chitosan, its properties and methods of modification. Also, this work focuses on diverse preparation techniques of chitosan-based bionanocomposites and their emerging application in various sectors. Additionally, this review sheds light on future research scope with some drawbacks and challenges to motivate the researchers for future outstanding research works.

CaCO3-Chitosan Composites Granules for Instant Hemostasis and Wound Healing

Excessive bleeding induces a high risk of death and is a leading cause of deaths that result from traffic accidents and military conflict. In this paper, we developed a novel porous chitosan-CaCO3 (CS-CaCO3) composite material and investigated its hemostatic properties and wound healing performance. The CS-CaCO3 composites material was prepared via a wet-granulation method. Granulation increases the infiltrating ability of the CS-CaCO3 composites material. The improved water absorption ability was enhanced to 460% for the CS-CaCO3 composites material compared to the CaCO3 or chitosan with only one single component. The coagulation studies in vivo illustrated that the blood clotting time was greatly reduced from 31 s for CaCO3 to 16 s for the CS-CaCO3 composite material. According to the results of the wound healing experiments in rats, it was found that the CS-CaCO3 composite material can promote wound healing. The CS-CaCO3 composite material could accelerate wound healing to a rate of 9 days, compared with 12 days for the CaCO3. The hemostatic activity, biocompatibility, and low cost of CS-CaCO3 composite material make it a potential agent for effective hemostatic and wound healing materials.

Modified porous carboxymethyl chitin microspheres by an organic solvent-free process for rapid hemostasis

Rapid and effective hemorrhage control is essential to reduce mortality following traumatic injuries. Herein we developed an organic solvent-free process to prepare carboxymethyl chitin microsphere (CMCHm) in an aqueous two-phase system through heating and freeze-drying. To further enhance the hemostatic performance of CMCHm, we loaded calcium ions and in-situ polymerized dopamine to get modified hemostatic microspheres CMCHm-Ca²⁺ and CMCHm-PDA, respectively. The size of these microspheres was mainly distributed between 50 μm and 150 μm, and the porous microstructure was observed by SEM. The data of in vitro degradation, cell cytotoxicity, and hemolysis test indicated good biocompatibility of these microspheres. Importantly, CMCHm-Ca²⁺ and CMCHm-PDA displayed better hemostatic performance compared with CMCHm and the positive controls Yunnan baiyao® and Quickclean®. Especially, the bleeding time was reduced to 59 s (CMCHm-Ca²⁺) and 45 s (CMCHm-PDA) in the femoral artery/vein cut model, respectively. All these demonstrate CMCHm-Ca²⁺ and CMCHm-PDA hold great potential for rapid hemostasis.

Advances in the preparation and assessment of the biological activities of chitosan oligosaccharides with different structural characteristics

Chitosan oligosaccharides (COSs) are widely used biopolymers that have been studied in relation to a variety of abnormal biological activities in the food and biomedical fields. Since different COS preparation technologies produce COS compounds with different structural characteristics, it has not yet been possible to determine whether one or more chito-oligomers are primarily responsible for the bioactivity of COSs. The inherent biocompatibility, mucosal adhesion and nontoxic nature of COSs are well documented, as is the fact that they are readily absorbed from the intestinal tract, but their structure-activity relationship requires further investigation. This review summarizes the methods used for COS preparation, and the research findings with regard to the antioxidant, anti-inflammatory, anti-obesity, bacteriostatic and antitumour activity of COSs with different structural characteristics. The correlation between the molecular structure and bioactivities of COSs is described, and new insights into their structure-activity relationship are provided.

Investigation of the antimicrobial activity and hematological pattern of nano-chitosan and its nano-copper composite

Novel synthesized Chitosan–Copper oxide nanocomposite (Cs–CuO) was prepared using pomegranate peels extract as green precipitating agents to improve the biological activity of Cs-NP's, which was synthesized through the ionic gelation method. The characterization of biogenic nanoparticles Cs-NP's and Cs–CuO-NP's was investigated structurally, morphologically to determine all the significant characters of those nanoparticles. Antimicrobial activity was tested for both Cs-NP's and Cs–CuO-NP's via minimum inhibition concentration and zone analysis against fungus, gram-positive and gram-negative. The antimicrobial test results showed high sensitivity of Cs–CuO-NP's to all microorganisms tested in a concentration less than 20,000 mg/L, while the sensitivity of Cs-NP's against all microorganisms under the test started from a concentration of 20,000–40,000 mg/L except for the C. albicans species. The hematological activity was also tested via measuring the RBCs, platelet count, and clotting time against healthy, diabetic, and hypercholesteremia blood samples. The measurement showed a decrease in RBCs and platelet count by adding Cs-NP’s or Cs–CuO-NP's to the three blood samples. Cs-NP's success in decreasing the clotting time for healthy and diabetic blood acting as a procoagulant agent while adding biogenic CuO-NP’s to Cs-NP’s increased clotting time considering as an anti-coagulant agent for hypercholesteremia blood samples.

Preparation and evaluation of an innovative antibacterial bi-layered composite dressing for skin wound healing

AIM OF THE STUDY

The aim of the current study was to develop collagen-based bi-layered composite dressings with antibacterial property and evaluate the efficiency for wound healing.

MATERIALS AND METHODS

A bi-layered composite wound dressing was fabricated using two marine biomacromolecules (collagen and chitosan or carboxymethyl chitosan). Non-crosslinked and N-Ethyl-N'-(3-dimethylaminopropyl) carbodiimide/N-Hydroxy succinimide (EDC/NHS) cross-linked collagen sponges fabricated by vacuum freeze-drying technology was used as the inner layer. The medical spun-laced nonwoven coated with chitosan and carboxymethyl chitosan was used as the outer layer. The antibacterial activities against E. coli and S. aureus were evaluated by the inhibition zone assay. Deep second-degree scald model was performed to evaluate the efficiency of bi-layered composite dressings for wound healing.

RESULTS

In view of comprehensive evaluation of appearance and in vitro antibacterial activity, medical spun-laced nonwoven coated with 3% of chitosan solution was chosen to be used as the optimized preparation conditions to produce the outer layer of composite dressing, which acted as a barrier against microorganisms and provided mechanical support. Furthermore, the results of wound closure and histopathological analysis indicated that EDC/NHS cross-linked collagen-based bi-layered composite dressing was superior to non-crosslinked and commercial products, which stimulated the wound healing process and accomplished deep second-degree scalded skin healing within a time span of 28 days.

CONCLUSION

The EDC/NHS cross-linked collagen-based bi-layered composite dressing had immense potential to be applied for an ideal wound dressing for more efficient and faster wound healing. Therefore, the findings provided the essential theoretical basis for great potential of collagen-based composite dressing used in wound healing applications.

Eradication of Intracellular Salmonella Typhimurium by Polyplexes of Acid-Transforming Chitosan and Fragment DNA

Antibiotics are highly successful against microbial infections. However, current challenges include rising antibiotic resistance rates and limited efficacy against intracellular pathogens. A novel form of a nanomaterial-based antimicrobial agent is investigated for efficient treatment of an intracellular Salmonella enterica sv Typhimurium infection. A known antimicrobial polysaccharide, chitosan, is engineered to be readily soluble under neutral aqueous conditions for systemic administration. The modified biologic, named acid-transforming chitosan (ATC), transforms into an insoluble, antimicrobial compound in the mildly acidic intracellular compartment. In cell culture experiments, ATC is confirmed to have antimicrobial activity against intracellular S. Typhimurium in a concentration- and pH-dependent manner, without affecting the host cells, RAW264.7 macrophages. For improved cellular uptake and pharmacokinetic/pharmacodynamic properties, ATC is further complexed with fragment DNA (fDNA), to form nano-sized spherical polyplexes. The resulting ATC/fDNA polyplexes efficiently eradicated S. Typhimurium from RAW264.7 macrophages. ATC/fDNA polyplexes may bind with microbial wall and membrane components. Consistent with this expectation, transposon insertion sequencing of a complex random mutant S. Typhimurium library incubated with ATC does not reveal specific genomic target regions of the antimicrobial. This study demonstrates the utility of a molecularly engineered nanomaterial as an efficient and safe antimicrobial agent, particularly against an intracellular pathogen.

A family of chitosan-peptide conjugates provides broad HLB values, enhancing emulsion's stability, antioxidant and drug release capacity

Strong hydrophilicity of polysaccharide and physicochemical instability of peptides limit application of polysaccharide-peptide mixtures in food industry. In this study, a natural resource platform of polysaccharide-peptide conjugates was constructed through Maillard reaction from chitosan and casein hydrophobic peptide. By choosing the molecular weight and deacetylation degree of chitosan and other reaction parameters, the conjugated chitosan-peptides possess extensive HLB values from 6 to 14 were obtained with grafting degree of 3.10%-15.08%. The conjugates have gained dramatically improved emulsifying ability, and endowed the emulsion higher antioxidant capacity than the peptide, chitosan and the mixture of peptide-chitosan has. Emulsions prepared with all conjugates exhibited long-term stability and strengthened tolerance towards temperature and electrolyte stimuli. This stable emulsion system also provided an effective encapsulation, protection and controlled release of curcumin, which may provide a method for transfer polysaccharides to stable emulsifiers with broader HLB values and application.

A nano chitosan membrane barrier prepared via Nanospider technology with non-toxic solvent for peritoneal adhesions' prevention

Peritoneal adhesion is one of the most common postsurgical complications and can cause bowel obstruction, pelvic pain, and infertility. Setting up a physical barrier directly between the injured site and surrounding tissues is an effective solution for preventing this adverse situation. This study investigated a chitosan electrospun membrane (CSEM) as a potent anti-adhesion barrier, which was prepared by a needleless technology called Nanospider. Scanning electron microscopy revealed that CSEM is a laminated nanofiber with good mechanical properties. The fiber is uniform with the diameter distributing in the range of 100-120 nm. The tensile strength can reach 27.45 ± 6.30 MPa with a maximum elongation at break of 18.50 ± 1.44%, which makes it stick easily to damaged parts but not to be easily damaged by tissue friction. The growth of S. aureus on CSEM was 59.18% lower than the control at 10 h, which indicates its better antibacterial property. In addition, CSEM has good coagulant and biocompatibility characteristics. It can perform hemostatic function within 10 min and the L929 mouse fibroblast viability on it was 92.18% ± 1.08% on the seventh day. In vivo experiments indicated that CSEM significantly prevented peritoneal adhesions within four weeks after surgery with wound surface coverage. These results indicate that CSEM is a promising anti-adhesion barrier material.

Polysaccharides-modified chitosan as improved and rapid hemostasis foam sponges

Serial hemostatic sponges consisting of polysaccharides-modified chitosan foam sponges were prepared by Schiff base crosslinking reaction between the deacetylated chitosan and oxidized dialdehyde cellulose. Such composite foam sponges were characterized by scanning electron microscopy and Fourier-transform infrared spectroscopy to confirm their morphology and compositions. Then the coagulation process was evaluated in vitro by thrombus elasticity meters. Furthermore, the hemostasis experiments on mouse tail vein and rabbit femoral artery were also performed in vivo. The results strongly indicated that such synergistic cellulose-modified chitosan foam sponges showed comprehensively excellent water-absorbing quality, improved mechanical performance, low hemolysis rates, benign cytotoxicity, good resilience ability after repeated compression, and superior hemostasis capability both in vitro and in vivo. Furthermore, the hemostatic mechanism is via adhering/activating the red blood cell/platelet to form robust blood clots through the endogenous coagulation pathway, which serves as a good candidate for emergency trauma treatment in daily civilian and military hemostasis.

PEG-crosslinked-chitosan hydrogel films for in situ delivery of Opuntia ficus-indica extract

In the present study, chitosan-based wound dressings loaded with the extract of Opuntia ficus-indica (OPU) were prepared. OPU is known for its capability to accelerate skin injury repair. Chitosan (Ch) was crosslinked with a low molecular weight diepoxy-poly(ethylene glycol) (diePEG), and hydrogel films with different Ch/PEG composition and OPU content were prepared by casting. The occurrence of crosslinking reaction was confirmed by FTIR spectroscopy. FTIR and DSC analysis suggested that ionic interactions occur between chitosan and OPU. Tensile tests evidenced that the crosslinking caused a decrease of Young's modulus, which approaches the value of the human skin modulus. Swelling characteristics, water vapor transmission rate, and release kinetics demonstrated that these films are adequate for the proposed application. Finally, a scratch test on a keratinocytes monolayer showed that the rate of cell migration in the presence of OPU-loaded samples is about 3-fold higher compared to unloaded films, confirming the repairing activity of OPU.

Rapid Distance-Based Cardiac Troponin Quantification Using Paper Analytical Devices for the Screening and the Follow-Up of Acute Myocardial Infarction, Using a Single Drop of Human Whole Blood

This work introduces the procedure of using non-immunoassay distance-based paper analytical devices (dPADs) to accurately measure any traces of the cardiac troponin I (TnI) in whole blood samples without the use of any external blood separation. This enables a rapid clinical diagnosis and the subsequent follow-up in regard to identifying acute myocardial infarction. These dPADs are designed and constructed to accommodate three parts: (1) a blood separation zone that is immobilized with a hemostatic agent, this no longer requires a blood separation membrane for the isolation of the plasma from the blood element, (2) a pretreatment zone, and (3) a detection zone coated with thymol blue. The quantitative TnI level in the whole blood was determined by measuring the blue color length found in the detection zone, which is proportional to the concentration, owing to the dry protein binding principle. Correspondingly, a mere single drop of human whole blood performs adequately within our proposed method. This reduces both the size of the collection process and the sample volumes needed in the respective medical fields. As we cover all of the optimization studies, our dPADs provide an evaluation of the linearity range from 0.025 to 2.5 ng/mL (R² = 0.9989) of TnI, with a detection limit as low as 0.025 ng/mL by use of an observation just using the naked eye. To validate the clinical utilities of our proposed method, our dPADs were then applied for the detection of TnI in humans using the whole blood sample of 15 volunteers. A great amount of accuracy was required in this assay because there was no significant difference between both methods, with the confidence level being as high as 95%. This technique also showed that the recoveries ranged from 99.40 to 104.27%, with the highest relative standard deviation being at 3.77%. Thus, our proposed dPADs offer more benefits for a rapid TnI determination.

Curdlan-Chitosan Electrospun Fibers as Potential Scaffolds for Bone Regeneration

Polysaccharides have received a lot of attention in biomedical research for their high potential as scaffolds owing to their unique biological properties. Fibrillar scaffolds made of chitosan demonstrated high promise in tissue engineering, especially for skin. As far as bone regeneration is concerned, curdlan (1,3-β-glucan) is particularly interesting as it enhances bone growth by helping mesenchymal stem cell adhesion, by favoring their differentiation into osteoblasts and by limiting the osteoclastic activity. Therefore, we aim to combine both chitosan and curdlan polysaccharides in a new scaffold for bone regeneration. For that purpose, curdlan was electrospun as a blend with chitosan into a fibrillar scaffold. We show that this novel scaffold is biodegradable (8% at two weeks), exhibits a good swelling behavior (350%) and is non-cytotoxic in vitro. In addition, the benefit of incorporating curdlan in the scaffold was demonstrated in a scratch assay that evidences the ability of curdlan to express its immunomodulatory properties by enhancing cell migration. Thus, these innovative electrospun curdlan–chitosan scaffolds show great potential for bone tissue engineering.

Roles of Chitosan in Green Synthesis of Metal Nanoparticles for Biomedical Applications

Chitosan (CS) is a well-known stabilizer for metal nanoparticles in biomedical engineering. However, very few studies have explored other important roles of CS including reducing, shape-directing, and size-controlling. This review aims to provide the latest and most comprehensive overview of the roles of CS in the green synthesis of metal nanoparticles for biomedical applications. To the best of our knowledge, this is the first review that highlights these potentialities of CS. At first, a brief overview of the properties and the bioactivity of CS is presented. Next, the benefits of CS for enhancing the physicochemical behaviors of metal nanoparticles are discussed in detail. The representative biomedical applications of CS-metal nanoparticles are also given. Lastly, the review outlines the perceptual vision for the future development of CS-metal nanoparticles in the biomedicine field.

A glimpse on the function of chitosan as a dental hemostatic agent

Managing a bleeding patient can be a challenge during dental surgery. Profuse hemorrhage due to platelet defects, coagulation disorders, vascular anomalies, medication-induced patients, as well as inherited bleeding ailments result in soft tissue hematoma, septic shock, compromised airway, and in some severe cases, death could occur. A vast array of surgical hemostatic agents are available to stop bleeding, including chitosan-based hemostatic agents. Chitosan has an advantage over other topical hemostatic materials for its ability to promote shorter bleeding times and assist in healing. Massive behind-the-scene research and development efforts are ongoing to increase the performance of chitosan as a hemostatic agent. Numerous studies on chitosan use in dental hemostasis have registered it as being safe, biodegradable, biocompatible, promoting healing, antimicrobial and bioactive. This article reviews the application of chitosan in managing hemostasis in dental patients.

Hemostatic Enhancement via Chitosan Is Independent of Classical Clotting Pathways-A Quantitative Study

Hemostasis is a process causing bleeding to stop, and it is known from the literature that hemostasis can be enhanced using chitosan on wound gauzes. We proposed here a continuous flow-through device, with the test blood flowing through the gauze sample at a constant flow rate and the pressure drop across the gauze measured, for assessing the hemostatic performance of the gauze. Experiments were performed using the device with both whole blood and washed blood (with clotting factors and platelets removed from the whole blood), and their results agree with each other within 10% discrepancy, indicating quantitatively that hemostatic enhancement via chitosan is essentially independent of classical clotting pathways, which was demonstrated qualitatively through animal tests in the literature. The proposed device and method can be applied for evaluating quantitatively the hemostatic performance of various gauzes in a flowing blood environment (in comparison with static tests) with less test blood (20-60% less, in comparison with that of a flow-through device driven by a constant pressure gradient), and are thus, helpful for designing better wound gauzes. In particular, it is effective to enhance the hemostatic performance further (additional 30%) through acidification (changing the amino group to the ammonium group) of the gauze for chitosan-based wound gauzes.

Polymeric Hydrogel Systems as Emerging Biomaterial Platforms to Enable Hemostasis and Wound Healing

Broad interest in developing new hemostatic technologies arises from unmet needs in mitigating uncontrolled hemorrhage in emergency, surgical, and battlefield settings. Although a variety of hemostats, sealants, and adhesives are available, development of ideal hemostatic compositions that offer a range of remarkable properties including capability to effectively and immediately manage bleeding, excellent mechanical properties, biocompatibility, biodegradability, antibacterial effect, and strong tissue adhesion properties, under wet and dynamic conditions, still remains a challenge. Benefiting from tunable mechanical properties, high porosity, biocompatibility, injectability and ease of handling, polymeric hydrogels with outstanding hemostatic properties have been receiving increasing attention over the past several years. In this review, after shedding light on hemostasis and wound healing processes, the most recent progresses in hydrogel systems engineered from natural and synthetic polymers for hemostatic applications are discussed based on a comprehensive literature review. Most studies described used in vivo models with accessible and compressible wounds to assess the hemostatic performance of hydrogels. The challenges that need to be tackled to accelerate the translation of these novel hemostatic hydrogel systems to clinical practice are emphasized and future directions for research in the field are presented.

Application status and technical analysis of chitosan-based medical dressings: a review

Chitosan has wide applications in the field of medical dressings due to its good biomedical properties. This review provides the application status and technical analysis of chitosan medical dressings. First, we introduce the source and chemical structure of chitosan. Then, we investigate the mechanism of chitosan showing different medical properties. We also show the application of supramolecular chitosan-based hydrogels in the dressing field and the formulation optimization and the preparation technology of chitosan dressings for fabricating chitosan-based dressings with various morphologies and medical functions. After that, we introduce the research process of the modification method of chitosan dressings including single modification, blending modification, crosslinking modification, etc. Finally, based on the study of the medical effects of chitosan dressings, we analyze the existing problems in the preparation process and propose corresponding solutions from the aspects of the morphology, clinical feedback effect, and future development trends. This paper can provide a reference for further studies of skin tissue engineering and the development of new chitosan medical dressings.

Chitosan has wide applications in the field of medical dressings due to its good biomedical properties.

Development and characterization of chitosan nanoparticles containing an indanonic tricyclic spiroisoxazoline derivative using ion-gelation method: an in vitro study

Biodegradable nanoparticulate carriers are potentially applicable compounds in the administration of therapeutic agents and drug delivery. They have received much attention due to their biological characteristics such as biodegradability, biocompatibility, and bioadhesive. The objectives of this work are first, investigating the impact of two important parameters (i.e. chitosan or sodium tripolyphosphate (TPP) solution concentration and chitosan to TPP mass ratio) on the chitosan nanoparticles (CNPs) formation by ionic-gelation method and then, the synthesis and characterization of chitosan-based, biodegradable drug-loaded nanoparticles in the encapsulation of novel 4'-(4-(methylsulfonyl)phenyl)-3'-(3,4,5-trimethoxyphenyl)-4'H-spiro[indene-2,5'-isoxazol]-1(3H)-one (MTS) indanonic tricyclic spiroisoxazoline, which is a potent anticancer drug. The particle size, shape, zeta potential, drug loading capacity, in vitro release characteristics, and stability of the formulated drug-loaded nanoparticles of the different drug:carrier ratio has been studied. The results indicated that the particle size increased at the higher chitosan or TPP concentration while the mass ratio did not appear to be a significant parameter during the cross-linking process. The particle diameter and zeta potential of CNPs including MTS were approximately in the range of 256-350 nm and 24.08-38.70 mV, respectively. The entrapment efficiency steadily increased with increasing the concentration of the polymer in formulizations. Throughout 24 h, the in vitro release behavior was provided a sustained release from all the drug-loaded formulizations. The optimal formulization of CNPs based on drug content with a drug:carrier ratio of 1:2 did not change appreciably during 60-day storage at either 4 °C or the ambient temperature.

Management of postoperative bleeding in surgically debrided wounds: topical haemostat versus electrocautery

OBJECTIVE

To compare the effectiveness of a temporary topical external haemostat (OMNI-STAT Granules, Omni-stat Medical Inc., US) versus the use of electrocautery for bleeding control in patients who have undergone surgical wound debridement. Time saved in the operating room (OR) was evaluated.

METHOD

A prospective evaluation of use of a topical haemostat in an OR setting was compared with retrospective data collected using electrocautery to understand the time-saving benefits of using a topical haemostat versus electrocautery.

RESULTS

A total of 52 patients were treated with the topical haemostat, and 89 patients with electrocautery. The topical haemostat was shown to be as effective in achieving haemostasis post-surgical debridement as electrocautery, with the added benefits of significant time savings in the OR (reducing the mean total OR time by 19.1%). Additionally, preprocedure and surgical procedure times in patients treated with the topical haemostat were significantly reduced. The results showed that wounds treated with the topical haemostat demonstrated a more advanced stage of healing, which may be a result of the lack of tissue damage demonstrated with the topical haemostat compared with electrocautery.

CONCLUSION

This study found that the temporary topical haemostat was equally as effective as cauterisation in achieving haemostasis. In addition, significant saving in OR time was demonstrated relative to electrocautery. The improved OR times may translate into increased cost-effectiveness, relative to electrocautery, by increasing the number of surgical cases per day and/or using resources more effectively to treat more patients. It may also enable bleeding control in the outpatient clinic or at the bedside, freeing up costly OR time and enabling more effective management of healthcare resources.

Recent Advancement of Molecular Structure and Biomaterial Function of Chitosan from Marine Organisms for Pharmaceutical and Nutraceutical Application

Chitosan is an innate cationic biological polysaccharide polymer, naturally obtained from chitin deacetylation, that possesses broad-spectrum properties such as antibacterial, biodegradability, biocompatibility, non-toxic, non-immunogenicity, and so on. Chitosan can be easily modified owing to its molecular chain that contains abundant active amino and hydroxyl groups, through various modifications. Not only does it possess excellent properties but it also greatly accelerates its solubility and endows it with additional special properties. It can be developed into bioactive materials with innovative properties, functions, and multiple uses, especially in the biomedical fields. In this paper, the unique properties and the relationship between the molecular structure of chitosan and its derivatives are emphasized, an overview of various excellent biomedical properties of chitosan and its current progress in the pharmaceutical and nutraceutical field have prospected, to provide the theoretical basis for better development and utilization of new biomedical materials of chitosan and its derivatives.