Reversal of diabetes by βTC3 cells encapsulated in alginate beads generated by emulsion and internal gelation

Postmodification with Polycations Enhances Key Properties of Alginate-Based Multicomponent Microcapsules

Postmodification of alginate-based microspheres with polyelectrolytes (PEs) is commonly used in the cell encapsulation field to control microsphere stability and permeability. However, little is known about how different applied PEs shape the microsphere morphology and properties, particularly in vivo. Here, we addressed this question using model multicomponent alginate-based microcapsules postmodified with PEs of different charge and structure. We found that the postmodification can enhance or impair the mechanical resistance and biocompatibility of microcapsules implanted into a mouse model, with polycations surprisingly providing the best results. Confocal Raman microscopy and confocal laser scanning microscopy (CLSM) analyses revealed stable interpolyelectrolyte complex layers within the parent microcapsule, hindering the access of higher molar weight PEs into the microcapsule core. All microcapsules showed negative surface zeta potential, indicating that the postmodification PEs get hidden within the microcapsule membrane, which agrees with CLSM data. Human whole blood assay revealed complex behavior of microcapsules regarding their inflammatory and coagulation potential. Importantly, most of the postmodification PEs, including polycations, were found to be benign toward the encapsulated model cells.

Inflammation-induced subcutaneous neovascularization for the long-term survival of encapsulated islets without immunosuppression

Cellular therapies for type-1 diabetes can leverage cell encapsulation to dispense with immunosuppression. However, encapsulated islet cells do not survive long, particularly when implanted in poorly vascularized subcutaneous sites. Here we show that the induction of neovascularization via temporary controlled inflammation through the implantation of a nylon catheter can be used to create a subcutaneous cavity that supports the transplantation and optimal function of a geometrically matching islet-encapsulation device consisting of a twisted nylon surgical thread coated with an islet-seeded alginate hydrogel. The neovascularized cavity led to the sustained reversal of diabetes, as we show in immunocompetent syngeneic, allogeneic and xenogeneic mouse models of diabetes, owing to increased oxygenation, physiological glucose responsiveness and islet survival, as indicated by a computational model of mass transport. The cavity also allowed for the in situ replacement of impaired devices, with prompt return to normoglycemia. Controlled inflammation-induced neovascularization is a scalable approach, as we show with a minipig model, and may facilitate the clinical translation of immunosuppression-free subcutaneous islet transplantation.

Encapsulation of Human-Bone-Marrow-Derived Mesenchymal Stem Cells in Small Alginate Beads Using One-Step Emulsification by Internal Gelation: In Vitro, and In Vivo Evaluation in Degenerate Intervertebral Disc Model

Cell microencapsulation in gel beads contributes to many biomedical processes and pharmaceutical applications. Small beads (<300 µm) offer distinct advantages, mainly due to improved mass transfer and mechanical strength. Here, we describe, for the first time, the encapsulation of human-bone-marrow-derived mesenchymal stem cells (hBM-MSCs) in small-sized microspheres, using one-step emulsification by internal gelation. Small (127−257 µm) high-mannuronic-alginate microspheres were prepared at high agitation rates (800−1000 rpm), enabling control over the bead size and shape. The average viability of encapsulated hBM-MSCs after 2 weeks was 81 ± 4.3% for the higher agitation rates. hBM-MSC-loaded microspheres seeded within a glycosaminoglycan (GAG) analogue, which was previously proposed as a mechanically equivalent implant for degenerate discs, kept their viability, sphericity, and integrity for at least 6 weeks. A preliminary in vivo study of hBM-MSC-loaded microspheres implanted (via a GAG-analogue hydrogel) in a rat injured intervertebral disc model demonstrated long-lasting viability and biocompatibility for at least 8 weeks post-implantation. The proposed method offers an effective and reproducible way to maintain long-lasting viability in vitro and in vivo. This approach not only utilizes the benefits of a simple, mild, and scalable method, but also allows for the easy control of the bead size and shape by the agitation rate, which, overall, makes it a very attractive platform for regenerative-medicine applications.

Nanocarrier Drug Delivery Systems: Characterization, Limitations, Future Perspectives and Implementation of Artificial Intelligence

There has been an increasing demand for the development of nanocarriers targeting multiple diseases with a broad range of properties. Due to their tiny size, giant surface area and feasible targetability, nanocarriers have optimized efficacy, decreased side effects and improved stability over conventional drug dosage forms. There are diverse types of nanocarriers that have been synthesized for drug delivery, including dendrimers, liposomes, solid lipid nanoparticles, polymersomes, polymer-drug conjugates, polymeric nanoparticles, peptide nanoparticles, micelles, nanoemulsions, nanospheres, nanocapsules, nanoshells, carbon nanotubes and gold nanoparticles, etc. Several characterization techniques have been proposed and used over the past few decades to control and predict the behavior of nanocarriers both in vitro and in vivo. In this review, we describe some fundamental in vitro, ex vivo, in situ and in vivo characterization methods for most nanocarriers, emphasizing their advantages and limitations, as well as the safety, regulatory and manufacturing aspects that hinder the transfer of nanocarriers from the laboratory to the clinic. Moreover, integration of artificial intelligence with nanotechnology, as well as the advantages and problems of artificial intelligence in the development and optimization of nanocarriers, are also discussed, along with future perspectives.

An in vitro Perfused Macroencapsulation Device to Study Hemocompatibility and Survival of Islet-Like Cell Clusters

Transplantation of hydrogel-encapsulated pancreatic islets is a promising long-term treatment for type 1 diabetes that restores blood glucose regulation while providing graft immunoprotection. Most human-scale islet encapsulation devices that rely solely on diffusion fail to provide sufficient surface area to meet islet oxygen demands. Perfused macroencapsulation devices use blood flow to mitigate oxygen limitations but increase the complexity of blood-device interactions. Here we describe a human-scale in vitro perfusion system to study hemocompatibility and performance of islet-like cell clusters (ILCs) in alginate hydrogel. A cylindrical perfusion device was designed for multi-day culture without leakage, contamination, or flow occlusion. Rat blood perfusion was assessed for prothrombin time and international normalized ratio and demonstrated no significant change in clotting time. Ex vivo perfusion performed with rats showed patency of the device for over 100 min using Doppler ultrasound imaging. PET-CT imaging of the device successfully visualized metabolically active mouse insulinoma 6 ILCs. ILCs cultured for 7 days under static conditions exhibited abnormal morphology and increased activated caspase-3 staining when compared with the perfused device. These findings reinforce the need for convective transport in macroencapsulation strategies and offer a robust and versatile in vitro system to better inform preclinical design.

An immune regulatory 3D-printed alginate-pectin construct for immunoisolation of insulin producing β-cells

Different bioinks have been used to produce cell-laden alginate-based hydrogel constructs for cell replacement therapy but some of these approaches suffer from issues with print quality, long-term mechanical instability, and bioincompatibility. In this study, new alginate-based bioinks were developed to produce cell-laden grid-shaped hydrogel constructs with stable integrity and immunomodulating capacity. Integrity and printability were improved by including the co-block-polymer Pluronic F127 in alginate solutions. To reduce inflammatory responses, pectin with a low degree of methylation was included and tested for inhibition of Toll-Like Receptor 2/1 (TLR2/1) dimerization and activation and tissue responses under the skin of mice. The viscoelastic properties of alginate-Pluronic constructs were unaffected by pectin incorporation. The tested pectin protected printed insulin-producing MIN6 cells from inflammatory stress as evidenced by higher numbers of surviving cells within the pectin-containing construct following exposure to a cocktail of the pro-inflammatory cytokines namely, IL-1β, IFN-γ, and TNF-α. The results suggested that the cell-laden construct bioprinted with pectin-alginate-Pluronic bioink reduced tissue responses via inhibiting TLR2/1 and support insulin-producing β-cell survival under inflammatory stress. Our study provides a potential novel strategy to improve long-term survival of pancreatic islet grafts for Type 1 Diabetes (T1D) treatment.

Two-step sedimentation process for selection of microcapsules containing cell aggregates

Microencapsulation technologies are being developed to protect transplanted islets from immune rejection, to reduce or even eliminate the need for immunosuppression. However, unencapsulated cells increase the chances of rejection and empty beads increase transplant volumes. Thus, separation processes were investigated to remove these byproducts based on density differences. The densities of islet-sized mouse insulinoma 6 (MIN6) cell aggregates and acellular 5% alginate beads generated via emulsification and internal gelation were ~ 1.065 and 1.042 g/ml, respectively. The separation of empty beads from those containing aggregates was performed by sedimentation under unit gravity in continuous gradients of polysucrose and sodium diatrizoate with density ranges of 1.032-1.045, 1.035-1.044, or 1.039-1.042 g/ml. The 1.039-1.042 g/ml gradient enabled recoveries of ~ 80% of the aggregate-containing beads while the other gradients recovered only ~ 60%. The bottom fraction of the 1.039-1.042 g/ml gradient contained beads with ~ 6% of their volume occupied by cell aggregates. Separation of unencapsulated aggregates from the aggregate-containing beads was then achieved by centrifugation of this purified fraction in a 1.055 g/ml density solution. Thus, these sedimentation-based approaches can effectively remove the byproducts of cell encapsulation.

Chitosan Microbeads Produced by One-Step Scalable Stirred Emulsification: A Promising Process for Cell Therapy Applications

Cell microencapsulation is a promising approach to improve cell therapy outcomes by protecting injected cells from rapid dispersion and allowing bidirectional diffusion of nutrients, oxygen, and waste that promote cell survival in the target tissues. Here, we describe a simple and scalable emulsification method to encapsulate animal cells in chitosan microbeads using thermosensitive gel formulations without any chemical modification and cross-linker. The process consists of a water-in-oil emulsion where the aqueous phase droplets contain cells (L929 fibroblasts or human mesenchymal stromal cells), chitosan acidic solution and gelling agents (sodium hydrogen carbonate and phosphate buffer or beta-glycerophosphate). The oil temperature is maintained at 37 °C, allowing rapid physical gelation of the microbeads. Alginate beads prepared with the same method were used as a control. Microbeads with a diameter of 300-450 μm were successfully produced. Chitosan and alginate (2% w/v) microbeads presented similar rigidity in compression, but chitosan microbeads endured >80% strain without rupture, while alginate microbeads presented fragile breakage at <50% strain. High cell viability and metabolic activity were observed after up to 7 days in culture for encapsulated cells. Mesenchymal stromal cells encapsulated in chitosan microbeads released higher amounts of the vascular endothelial growth factor after 24 h compared to the cells encapsulated in manually cast macrogels. Moreover, microbeads were injectable through 23G needles without significant deformation or rupture. The emulsion-generated chitosan microbeads are a promising delivery vehicle for therapeutic cells because of their cytocompatibility, biodegradation, mechanical strength, and injectability. Clinical-scale encapsulation of therapeutic cells such as mesenchymal stromal cells in chitosan microbeads can readily be achieved using this simple and scalable emulsion-based process.

Development of a microchannel emulsification process for pancreatic beta cell encapsulation

In this study, we developed a high‐throughput microchannel emulsification process to encapsulate pancreatic beta cells in monodisperse alginate beads. The process builds on a stirred emulsification and internal gelation method previously adapted to pancreatic cell encapsulation. Alginate bead production was achieved by flowing a 0.5–2.5% alginate solution with cells and CaCO₃ across a 1‐mm thick polytetrafluoroethylene plate with 700 × 200 μm rectangular straight‐through channels. Alginate beads ranging from 1.5–3 mm in diameter were obtained at production rates exceeding 140 mL/hr per microchannel. Compared to the stirred emulsification process, the microchannel emulsification beads had a narrower size distribution and demonstrated enhanced compressive burst strength. Both microchannel and stirred emulsification beads exhibited homogeneous profiles of 0.7% alginate concentration using an initial alginate solution concentration of 1.5%. Encapsulated beta cell viability of 89 ± 2% based on live/dead staining was achieved by minimizing the bead residence time in the acidified organic phase fluid. Microchannel emulsification is a promising method for clinical‐scale pancreatic beta cell encapsulation as well as other applications in the pharmaceutical, food, and cosmetic industries.

Structural changes in alginate-based microspheres exposed to in vivo environment as revealed by confocal Raman microscopy

A next-generation cure for type 1 diabetes relies on immunoprotection of insulin-producing cells, which can be achieved by their encapsulation in microspheres made of non-covalently crosslinked hydrogels. Treatment success is directly related to the microsphere structure that is characterized by the localization of the polymers constituting the hydrogel material. However, due to the lack of a suitable analytical method, it is presently unknown how the microsphere structure changes in vivo, which complicates evaluation of different encapsulation approaches. Here, confocal Raman microscopy (CRM) imaging was tailored to serve as a powerful new tool for tracking structural changes in two major encapsulation designs, alginate-based microbeads and multi-component microcapsules. CRM analyses before implantation and after explantation from a mouse model revealed complete loss of the original heterogeneous structure in the alginate microbeads, making the intentionally high initial heterogeneity a questionable design choice. On the other hand, the structural heterogeneity was conserved in the microcapsules, which indicates that this design will better retain its immunoprotective properties in vivo. In another application, CRM was used for quantitative mapping of the alginate concentration throughout the microbead volume. Such data provide invaluable information about the microenvironment cells would encounter upon their encapsulation in alginate microbeads.

Physicochemical characterization of drug nanocarriers

Pharmaceutical design has enabled important advances in the prevention, treatment, and diagnosis of diseases. The use of nanotechnology to optimize the delivery of drugs and diagnostic molecules is increasingly receiving attention due to the enhanced efficiency provided by these systems. Understanding the structures of nanocarriers is crucial in elucidating their physical and chemical properties, which greatly influence their behavior in the body at both the molecular and systemic levels. This review was conducted to describe the principles and characteristics of techniques commonly used to elucidate the structures of nanocarriers, with consideration of their size, morphology, surface charge, porosity, crystalline arrangement, and phase. These techniques include X-ray diffraction, small-angle X-ray scattering, dynamic light scattering, zeta potential, polarized light microscopy, transmission electron microscopy, scanning electron microcopy, and porosimetry. Moreover, we describe some of the commonly used nanocarriers (liquid crystals, metal-organic frameworks, silica nanospheres, liposomes, solid lipid nanoparticles, and micelles) and the main aspects of their structures.

Mammalian Cell Encapsulation in Alginate Beads Using a Simple Stirred Vessel

Cell encapsulation in alginate beads has been used for immobilized cell culture in vitro as well as for immunoisolation in vivo. Pancreatic islet encapsulation has been studied extensively as a means to increase islet survival in allogeneic or xenogeneic transplants. Alginate encapsulation is commonly achieved by nozzle extrusion and external gelation. Using this method, cell-containing alginate droplets formed at the tip of nozzles fall into a solution containing divalent cations that cause ionotropic alginate gelation as they diffuse into the droplets. The requirement for droplet formation at the nozzle tip limits the volumetric throughput and alginate concentration that can be achieved. This video describes a scalable emulsification method to encapsulate mammalian cells in 0.5% to 10% alginate with 70% to 90% cell survival. By this alternative method, alginate droplets containing cells and calcium carbonate are emulsified in mineral oil, followed by a decrease in pH leading to internal calcium release and ionotropic alginate gelation. The current method allows the production of alginate beads within 20 min of emulsification. The equipment required for the encapsulation step consists in simple stirred vessels available to most laboratories.

Alginate core-shell beads for simplified three-dimensional tumor spheroid culture and drug screening

We demonstrate that when using cell-laden core-shell hydrogel beads to support the generation of tumor spheroids, the shell structure reduces the out-of-bead and monolayer cell proliferation that occurs during long-term culture of tumor cells within core-only alginate beads. We fabricate core-shell beads in a two-step process using simple, one-layer microfluidic devices. Tumor cells encapsulated within the bead core will proliferate to form multicellular aggregates which can serve as three-dimensional (3-D) models of tumors in drug screening. Encapsulation in an alginate shell increased the time that cells could be maintained in three-dimensional culture for MCF-7 breast cancer cells prior to out-of-bead proliferation, permitting formation of spheroids over a period of 14 days without the need move the cell-laden beads to clean culture flasks to separate beads from underlying monolayers. Tamoxifen and docetaxel dose response shows decreased toxicity for multicellular aggregates in three-dimensional core-shell bead culture compared to monolayer. Using simple core-only beads gives mixed monolayer and 3-D culture during drug screening, and alters the treatment result compared to the 3-D core-shell or the 2-D monolayer groups, as measured by standard proliferation assay. By preventing the out-of-bead proliferation and subsequent monolayer formation that is observed with core-only beads, the core-shell structure can obviate the requirement to transfer the beads to a new culture flask during drug screening, an important consideration for cell-based drug screening and drugs which have high multicellular resistance index.

Calcium/Cobalt Alginate Beads as Functional Scaffolds for Cartilage Tissue Engineering

Articular cartilage is a highly organized tissue with complex biomechanical properties. However, injuries to the cartilage usually lead to numerous health concerns and often culminate in disabling symptoms, due to the poor intrinsic capacity of this tissue for self-healing. Although various approaches are proposed for the regeneration of cartilage, its repair still represents an enormous challenge for orthopedic surgeons. The field of tissue engineering currently offers some of the most promising strategies for cartilage restoration, in which assorted biomaterials and cell-based therapies are combined to develop new therapeutic regimens for tissue replacement. The current study describes the in vitro behavior of human adipose-derived mesenchymal stem cells (hADSCs) encapsulated within calcium/cobalt (Ca/Co) alginate beads. These novel chondrogenesis-promoting scaffolds take advantage of the synergy between the alginate matrix and Co⁺² ions, without employing costly growth factors (e.g., transforming growth factor betas (TGF-βs) or bone morphogenetic proteins (BMPs)) to direct hADSC differentiation into cartilage-producing chondrocytes.

Alginate encapsulation of human embryonic stem cells to enhance directed differentiation to pancreatic islet-like cells

The pluripotent property of human embryonic stem cells (hESCs) makes them attractive for treatment of degenerative diseases such as diabetes. We have developed a stage-wise directed differentiation protocol to produce alginate-encapsulated islet-like cells derived from hESCs, which can be directly implanted for diabetes therapy. The advantage of alginate encapsulation lies in its capability to immunoisolate, along with the added possibility of scalable culture. We have evaluated the possibility of encapsulating hESCs at different stages of differentiation. Encapsulation of predifferentiated cells resulted in insufficient cellular yield and differentiation. On the other hand, encapsulation of undifferentiated hESCs followed by differentiation induction upon encapsulation resulted in the highest viability and differentiation. More striking was that alginate encapsulation resulted in a much stronger differentiation compared to parallel two-dimensional cultures, resulting in 20-fold increase in c-peptide protein synthesis. To elucidate the mechanism contributing to encapsulation-mediated enhancement in hESC maturation, investigation of the signaling pathways revealed interesting insight. While the phospho-protein levels of all the tested signaling molecules were lower under encapsulation, the ratio of pSMAD/pAKT was significantly higher, indicating a more efficient signal transduction under encapsulation. These results clearly demonstrate that alginate encapsulation of hESCs and differentiation to islet-cell types provides a potentially translatable treatment option for type 1 diabetes.

Core-shell hydrogel beads with extracellular matrix for tumor spheroid formation

Creating multicellular tumor spheroids is critical for characterizing anticancer treatments since they may provide a better model of the tumor than conventional monolayer culture. Moreover, tumor cell interaction with the extracellular matrix can determine cell organization and behavior. In this work, a microfluidic system was used to form cell-laden core-shell beads which incorporate elements of the extracellular matrix and support the formation of multicellular spheroids. The bead core (comprising a mixture of alginate, collagen, and reconstituted basement membrane, with gelation by temperature control) and shell (comprising alginate hydrogel, with gelation by ionic crosslinking) were simultaneously formed through flow focusing using a cooled flow path into the microfluidic chip. During droplet gelation, the alginate acts as a fast-gelling shell which aids in preventing droplet coalescence and in maintaining spherical droplet geometry during the slower gelation of the collagen and reconstituted basement membrane components as the beads warm up. After droplet gelation, the encapsulated MCF-7 cells proliferated to form uniform spheroids when the beads contained all three components: alginate, collagen, and reconstituted basement membrane. The dose-dependent response of the MCF-7 cell tumor spheroids to two anticancer drugs, docetaxel and tamoxifen, was compared to conventional monolayer culture.

Bioluminescence tracking of alginate micro-encapsulated cell transplants

Cell-based therapies to treat loss-of-function hormonal disorders such as diabetes and Parkinson's disease are routinely coupled with encapsulation strategies, but an understanding of when and why grafts fail in vivo is lacking. Consequently, investigators cannot clearly define the key factors that influence graft success. Although bioluminescence is a popular method to track the survival of free cells transplanted in preclinical models, little is known of the ability to use bioluminescence for real-time tracking of microencapsulated cells. Furthermore, the impact that dynamic imaging distances may have, due to freely-floating microcapsules in vivo, on cell survival monitoring is unknown. This work addresses these questions by applying bioluminescence to a pancreatic substitute based on microencapsulated cells. Recombinant insulin-secreting cells were transduced with a luciferase lentivirus and microencapsulated in Ba²⁺ crosslinked alginate for in vitro and in vivo studies. In vitro quantitative bioluminescence monitoring was possible and viable microencapsulated cells were followed in real time under both normoxic and anoxic conditions. Although in vivo dispersion of freely-floating microcapsules in the peritoneal cavity limited the analysis to a qualitative bioluminescence evaluation, signals consistently four orders of magnitude above background were clear indicators of temporal cell survival. Strong agreement between in vivo and in vitro cell proliferation over time was discovered by making direct bioluminescence comparisons between explanted microcapsules and parallel in vitro cultures. Broader application of this bioluminescence approach to retrievable transplants, in supplement to currently used end-point physiological tests, could improve understanding and accelerate development of cell-based therapies for critical clinical applications. Copyright © 2014 John Wiley & Sons, Ltd.

Therapeutic cell encapsulation techniques and applications in diabetes

The encapsulation of therapeutic cells permits the implantation of allogeneic and xenogeneic cells for the regulation of certain physiological processes damaged by the death or senescence of host tissues. The encapsulation of pancreatic cells for the treatment of diabetes is emphasized; however, many of the techniques are applicable to a wide array of mammalian cell applications. The summary of both established and novel encapsulation techniques, clinical trials, and commercial product developments highlights the metered but steady pace of therapeutic cell encapsulation towards implementation.

Encapsulated islets for diabetes therapy: history, current progress, and critical issues requiring solution

Insulin therapy became a reality in 1921 dramatically saving lives of people with diabetes, but not protecting them from long-term complications. Clinically successful free islet implants began in 1989 but require life long immunosuppression. Several encapsulated islet approaches have been ongoing for over 30 years without defining a clinically relevant product. Macro-devices encapsulating islet mass in a single device have shown long-term success in large animals but human trials have been limited by critical challenges. Micro-capsules using alginate or similar hydrogels encapsulate individual islets with many hundreds of promising rodent results published, but a low incidence of successful translation to large animal and human results. Reduction of encapsulated islet mass for clinical transplantation is in progress. This review covers the status of both early and current studies including the presentation of corporate efforts involved. It concludes by defining the critical items requiring solution to enable a successful clinical diabetes therapy.

Advances in biocompatibility and physico-chemical characterization of microspheres for cell encapsulation

Cell encapsulation has already shown its high potential and holds the promise for future cell therapies to enter the clinics as a large scale treatment option for various types of diseases. The advancement in cell biology towards this goal has to be complemented with functional biomaterials suitable for cell encapsulation. This cannot be achieved without understanding the close correlation between cell performance and properties of microspheres. The ongoing challenges in the field of cell encapsulation require a critical view on techniques and approaches currently utilized to characterize microspheres. This review deals with both principal subjects of microspheres characterization in the cell encapsulation field: physico-chemical characterization and biocompatibility. The up-to-day knowledge is summarized and discussed with the focus to identify missing knowledge and uncertainties, and to propose the mandatory next steps in characterization of microspheres for cell encapsulation. The primary conclusion of this review is that further success in development of microspheres for cell therapies cannot be accomplished without careful selection of characterization techniques, which are employed in conjunction with biological tests.

Making surrogate β-cells from mesenchymal stromal cells: perspectives and future endeavors

Generation of surrogate β-cells is the need of the day to compensate the short supply of islets for transplantation to diabetic patients requiring daily shots of insulin. Over the years several sources of stem cells have been claimed to cater to the need of insulin producing cells. These include human embryonic stem cells, induced pluripotent stem cells, human perinatal tissues such as amnion, placenta, umbilical cord and postnatal tissues involving adipose tissue, bone marrow, blood monocytes, cord blood, dental pulp, endometrium, liver, labia minora dermis-derived fibroblasts and pancreas. Despite the availability of such heterogonous sources, there is no substantial breakthrough in selecting and implementing an ideal source for generating large number of stable insulin producing cells. Although the progress in derivation of β-cell like cells from embryonic stem cells has taken a greater leap, their application is limited due to controversy surrounding the destruction of human embryo and immune rejection. Since multipotent mesenchymal stromal cells are free of ethical and immunological complications, they could provide unprecedented opportunity as starting material to derive insulin secreting cells. The main focus of this review is to discuss the merits and demerits of MSCs obtained from human peri- and post-natal tissue sources to yield abundant glucose responsive insulin producing cells as ideal candidates for prospective stem cell therapy to treat diabetes.