Accuracy of high-resolution in vivo micro magnetic resonance imaging for measurements of microstructural and mechanical properties of human distal tibial bone

Mg-Zn-Ca Alloy (ZX00) Screws Are Resorbed at a Mean of 2.5 Years After Medial Malleolar Fracture Fixation: Follow-up of a First-in-humans Application and Insights From a Sheep Model

BACKGROUND

In the ongoing development of bioresorbable implants, there has been a particular focus on magnesium (Mg)-based alloys. Several Mg alloys have shown promising properties, including a lean, bioresorbable magnesium-zinc-calcium (Mg-Zn-Ca) alloy designated as ZX00. To our knowledge, this is the first clinically tested Mg-based alloy free from rare-earth elements or other elements. Its use in medial malleolar fractures has allowed for bone healing without requiring surgical removal. It is thus of interest to assess the resorption behavior of this novel bioresorbable implant.

QUESTIONS/PURPOSES

(1) What is the behavior of implanted Mg-alloy (ZX00) screws in terms of resorption (implant volume, implant surface, and gas volume) and bone response (histologic evaluation) in a sheep model after 13 months and 25 months? (2) What are the radiographic changes and clinical outcomes, including patient-reported outcome measures, at a mean of 2.5 years after Mg-alloy (ZX00) screw fixation in patients with medial malleolar fractures?

METHODS

A sheep model was used to assess 18 Mg-alloy (ZX00) different-length screws (29 mm, 24 mm, and 16 mm) implanted in the tibiae and compared with six titanium-alloy screws. Micro-CT was performed at 13 and 25 months to quantify the implant volume, implant surface, and gas volume at the implant sites, as well as histology at both timepoints. Between July 2018 and October 2019, we treated 20 patients with ZX00 screws for medial malleolar fractures in a first-in-humans study. We considered isolated, bimalleolar, or trimalleolar fractures potentially eligible. Thus, 20 patients were eligible for follow-up. However, 5% (one patient) of patients were excluded from the analysis because of an unplanned surgery for a pre-existing osteochondral lesion of the talus performed 17 months after ZX00 implantation. Additionally, another 5% (one patient) of patients were lost before reaching the minimum study follow-up period. Our required minimum follow-up period was 18 months to ensure sufficient time to observe the outcomes of interest. At this timepoint, 10% (two patients) of patients were either missing or lost to follow-up. The follow-up time was a mean of 2.5 ± 0.6 years and a median of 2.4 years (range 18 to 43 months).

RESULTS

In this sheep model, after 13 months, the 29-mm screws (initial volume: 198 ± 1 mm 3 ) degraded by 41% (116 ± 6 mm 3 , mean difference 82 [95% CI 71 to 92]; p < 0.001), and after 25 months by 65% (69 ± 7 mm 3 , mean difference 130 [95% CI 117 to 142]; p < 0.001). After 13 months, the 24-mm screws (initial volume: 174 ± 0.2 mm 3 ) degraded by 51% (86 ± 21 mm 3 , mean difference 88 [95% CI 52 to 123]; p = 0.004), and after 25 months by 72% (49 ± 25 mm 3 , mean difference 125 [95% CI 83 to 167]; p = 0.003). After 13 months, the 16-mm screws (initial volume: 112 ± 5 mm 3 ) degraded by 57% (49 ± 8 mm 3 , mean difference 63 [95% CI 50 to 76]; p < 0.001), and after 25 months by 61% (45 ± 10 mm 3 , mean difference 67 [95% CI 52 to 82]; p < 0.001). Histologic evaluation qualitatively showed ongoing resorption with new bone formation closely connected to the resorbing screw without an inflammatory reaction. In patients treated with Mg-alloy screws after a mean of 2.5 years, the implants were radiographically not visible in 17 of 18 patients and the bone had homogenous texture in 15 of 18 patients. No clinical or patient-reported complications were observed.

CONCLUSION

In this sheep model, Mg-alloy (ZX00) screws showed a resorption to one-third of the original volume after 25 months, without eliciting adverse immunologic reactions, supporting biocompatibility during this period. Mg-alloy (ZX00) implants were not detectable on radiographs after a mean of 2.5 years, suggesting full resorption, but further studies are needed to assess environmental changes regarding bone quality at the implantation site after implant resorption.

CLINICAL RELEVANCE

The study demonstrated successful healing of medial malleolar fractures using bioresorbable Mg-alloy screws without clinical complications or revision surgery, resulting in pain-free ankle function after 2.5 years. Future prospective studies with larger samples and extended follow-up periods are necessary to comprehensively assess the long-term effectiveness and safety of ZX00 screws, including an exploration of limitations when there is altered bone integrity, such as in those with osteoporosis. Additional use of advanced imaging techniques, such as high-resolution CT, can enhance evaluation accuracy.

Digital wrist tomosynthesis (DWT)-based finite element analysis of ultra-distal radius differentiates patients with and without a history of osteoporotic fracture

Despite effective therapies for those at risk of osteoporotic fracture, low adherence to screening guidelines and limited accuracy of bone mineral density (BMD) in predicting fracture risk preclude identification of those at risk. Because of high adherence to routine mammography, bone health screening at the time of mammography using a digital breast tomosynthesis (DBT) scanner has been suggested as a potential solution. BMD and bone microstructure can be measured from the wrist using a DBT scanner. However, the extent to which biomechanical variables can be derived from digital wrist tomosynthesis (DWT) has not been explored. Accordingly, we measured stiffness from a DWT based finite element (DWT-FE) model of the ultra-distal (UD) radius and ulna, and correlate these to reference microcomputed tomography image based FE (μCT-FE) from five cadaveric forearms. Further, this method is implemented to determine in vivo reproducibility of FE derived stiffness of UD radius and demonstrate the in vivo utility of DWT-FE in bone quality assessment by comparing two groups of postmenopausal women with and without a history of an osteoporotic fracture (Fx; n = 15, NFx; n = 51). Stiffness obtained from DWT and μCT had a strong correlation (R2 = 0.87, p < 0.001). In vivo repeatability error was <5 %. The NFx and Fx groups were not significantly different in DXA derived minimum T-scores (p > 0.3), but stiffness of the UD radius was lower for the Fx group (p < 0.007). Logistic regression models of fracture status with stiffness of the nondominant arm as the predictor were significant (p < 0.01). In conclusion this study demonstrates the feasibility of fracture risk assessment in mammography settings using DWT imaging and FE modeling in vivo. Using this approach, bone and breast screening can be performed in a single visit, with the potential to improve both the prevalence of bone health screening and the accuracy of fracture risk assessment.

Six-minute, in vivo MRI quantification of proximal femur trabecular bone 3D microstructure

BACKGROUND

Assessment of proximal femur trabecular bone microstructure in vivo by magnetic resonance imaging has recently been validated for acquiring information independent of bone mineral density in osteoporotic patients. However, the requisite signal-to-noise ratio (SNR) and resolution for interrogation of the trabecular microstructure at this anatomical location prolongs the scan duration and renders the imaging protocol clinically infeasible. Parallel imaging and compressed sensing (PICS) techniques can reduce the scan duration of the imaging protocol without substantially compromising image quality. The present work investigates the limits of acceleration for a commonly used PICS technique, ℓ1-ESPIRiT, for the purpose of quantifying measures of trabecular bone microarchitecture. Based on a desired error tolerance, a six-minute, prospectively accelerated variant of the imaging protocol was developed and assessed for intersession reproducibility and agreement with the longer reference scan.

PURPOSE

To investigate the limits of acceleration for MRI-based trabecular bone quantification by parallel imaging and compressed sensing reconstruction, and to develop a prototypical imaging protocol for assessing the proximal femur microstructure in a clinically practical scan time.

METHODS

Healthy participants (n = 11) were scanned by a 3D balanced steady-state free precession (bSSFP) sequence satisfying the Nyquist criterion with a scan duration of about 18 min. The raw data were retrospectively undersampled and reconstructed to mimic various acceleration factors ranging from 2 to 6. Trabecular volumes-of-interest in four major femoral regions (greater trochanter, intertrochanteric region, femoral neck, and femoral head) were analyzed and six relevant measures of trabecular bone microarchitecture (bone volume fraction, surface-to-curve ratio, erosion index, elastic modulus, trabecular thickness, plates-to-rods ratio) were obtained for images of all accelerations. To assess agreement, median percent error and intraclass correlation coefficients (ICCs) were computed using the fully-sampled data as reference. Based on this analysis, a prospectively 3-fold accelerated sequence with a duration of about 6 min was developed and the analysis was repeated.

RESULTS

A prospective acceleration factor of 3 demonstrated comparable performance in reproducibility and absolute agreement to the fully-sampled scan. The median CoV over all image-derived metrics was generally <6 % and ICCs >0.70. Also, measurements from prospectively 3-fold accelerated scans demonstrated in general median percent errors of <7 % and ICCs >0.70.

CONCLUSION

The present work proposes a method to make in vivo quantitative assessment of proximal femur trabecular microstructure with a clinically practical scan duration of about 6 min.

Tailoring the Microarchitectures of 3D Printed Bone-like Scaffolds for Tissue Engineering Applications

Material extrusion (MEX), commonly referred to as fused deposition modeling (FDM) or fused filament fabrication (FFF), is a versatile and cost-effective technique to fabricate suitable scaffolds for tissue engineering. Driven by a computer-aided design input, specific patterns can be easily collected in an extremely reproducible and repeatable process. Referring to possible skeletal affections, 3D-printed scaffolds can support tissue regeneration of large bone defects with complex geometries, an open major clinical challenge. In this study, polylactic acid scaffolds were printed resembling trabecular bone microarchitecture in order to deal with morphologically biomimetic features to potentially enhance the biological outcome. Three models with different pore sizes (i.e., 500, 600, and 700 µm) were prepared and evaluated by means of micro-computed tomography. The biological assessment was carried out seeding SAOS-2 cells, a bone-like cell model, on the scaffolds, which showed excellent biocompatibility, bioactivity, and osteoinductivity. The model with larger pores, characterized by improved osteoconductive properties and protein adsorption rate, was further investigated as a potential platform for bone-tissue engineering, evaluating the paracrine activity of human mesenchymal stem cells. The reported findings demonstrate that the designed microarchitecture, better mimicking the natural bone extracellular matrix, favors a greater bioactivity and can be thus regarded as an interesting option for bone-tissue engineering.

Continuum finite element analysis generalizesin vivotrabecular bone microstructural strength measures between two CT scanners with different image resolution

Fragility of trabecular bone (Tb) microstructure is increased in osteoporosis, which is associated with rapid bone loss and enhanced fracture-risk. Accurate assessment of Tb strength usingin vivoimaging available in clinical settings will be significant for management of osteoporosis and understanding its pathogenesis. Emerging CT technology, featured with high image resolution, fast scan-speed, and wide clinical access, is a promising alternative forin vivoTb imaging. However, variation in image resolution among different CT scanners pose a major hurdle in CT-based bone studies. This paper presents nonlinear continuum finite element (FE) methods for computation of Tb strength fromin vivoCT imaging and evaluates their generalizability between two scanners with different image resolution. Continuum FE-based measures of Tb strength under different loading conditions were found to be highly reproducible (ICC ≥ 0.93) using ankle images of twenty healthy volunteers acquired on low- and high-resolution CT scanners 44.6 ± 2.7 days apart. FE stress propagation was mostly confined to Tb micro-network (2.3 ± 1.7 MPa) with nominal leakages over the marrow space (0.4 ± 0.5 MPa) complying with the fundamental principle of mechanics atin vivoimaging. In summary, nonlinear continuum FE-based Tb strength measures are reproducible among different CT scanners and suitable for multi-site longitudinal human studies.

Multiscale Label-Free Imaging of Fibrillar Collagen in the Tumor Microenvironment

With recent advances in cancer therapeutics, there is a great need for improved imaging methods for characterizing cancer onset and progression in a quantitative and actionable way. Collagen, the most abundant extracellular matrix protein in the tumor microenvironment (and the body in general), plays a multifaceted role, both hindering and promoting cancer invasion and progression. Collagen deposition can defend the tumor with immunosuppressive effects, while aligned collagen fiber structures can enable tumor cell migration, aiding invasion and metastasis. Given the complex role of collagen fiber organization and topology, imaging has been a tool of choice to characterize these changes on multiple spatial scales, from the organ and tumor scale to cellular and subcellular level. Macroscale density already aids in the detection and diagnosis of solid cancers, but progress is being made to integrate finer microscale features into the process. Here we review imaging modalities ranging from optical methods of second harmonic generation (SHG), polarized light microscopy (PLM), and optical coherence tomography (OCT) to the medical imaging approaches of ultrasound and magnetic resonance imaging (MRI). These methods have enabled scientists and clinicians to better understand the impact collagen structure has on the tumor environment, at both the bulk scale (density) and microscale (fibrillar structure) levels. We focus on imaging methods with the potential to both examine the collagen structure in as natural a state as possible and still be clinically amenable, with an emphasis on label-free strategies, exploiting intrinsic optical properties of collagen fibers.

Quantifying the Human Subchondral Trabecular Bone Microstructure in Osteoarthritis with Clinical CT

Osteoarthritis (OA) is characterized by critical alterations of the subchondral bone microstructure, besides the well-known cartilaginous changes. Clinical computed tomography (CT) detection of quantitative 3D microstructural subchondral bone parameters is applied to monitor changes of subchondral bone structure in different stages of human OA and is compared with micro-CT, the gold standard. Determination by clinical CT (287 µm resolution) of key microstructural parameters in tibial plateaus with mild-to-moderate and severe OA reveals strong correlations to micro-CT (35 µm), high inter- and intraobserver reliability, and small relative differences. In vivo, normal, mild-to-moderate, and severe OA are compared with clinical CT (331 µm). All approaches detect characteristic expanded trabecular structure in severe OA and fundamental microstructural correlations with clinical OA stage. Multivariate analyses at various in vivo and ex vivo imaging resolutions always reliably separate mild-to-moderate from severe OA (except mild-to-moderate OA from normal), revealing a striking similarity between 287 µm clinical and 35 µm micro-CT. Thus, accurate structural measurements using clinical CT with a resolution near the trabecular dimensions are possible. Clinical CT offers an opportunity to quantitatively monitor subchondral bone microstructure in clinical and experimental settings as an advanced tool of investigating OA and other diseases affecting bone architecture.

Optimally-Tailored Spinodal Architected Materials for Multiscale Design and Manufacturing

Spinodal architected materials with tunable anisotropy unify optimal design and manufacturing of multiscale structures. By locally varying the spinodal class, orientation, and porosity during topology optimization, a large portion of the anisotropic material space is exploited such that material is efficiently placed along principal stress trajectories at the microscale. Additionally, the bicontinuous, nonperiodic, unstructured, and stochastic nature of spinodal architected materials promotes mechanical and biological functions not explicitly considered during optimization (e.g., insensitivity to imperfections, fluid transport conduits). Furthermore, in contrast to laminated composites or periodic, structured architected materials (e.g., lattices), the functional representation of spinodal architected materials leads to multiscale, optimized designs with clear physical interpretation that can be manufactured directly, without special treatment at spinodal transitions. Physical models of the optimized, spinodal-embedded parts are manufactured using a scalable, voxel-based strategy to communicate with a masked stereolithography (m-SLA) 3D printer.

MRI-based mechanical competence assessment of bone using micro finite element analysis (micro-FEA): Review

Areal bone mineral density (aBMD) from dual-energy x-ray absorptiometry (DEXA) and volumetric bone mineral density (vBMD) have demonstrated limited capabilities in the evaluation of bone mechanical competence and prediction of bone fracture. Predicting the macroscopic mechanical behavior of the bone structure has been challenging because of the heterogeneous and anisotropic nature of bone, such as the dependencies on loading direction, anatomical location, and sample dimensions. Magnetic resonance imaging (MRI) has been introduced as a promising modality that can be coupled with finite element analysis (FEA) for the assessment of bone mechanical competence. This review article describes studies investigating MRI-based micro-FEA as a potential non-invasive method to predict bone mechanical competence and facilitate bone fracture risk estimation without exposure to ionizing radiation. Specifically, the steps, applications, and future potential of FEA using indirect and direct bone imaging are discussed.

CT ‐based Stiffness Measures of Trabecular Bone Microstructure — Cadaveric Validation and In Vivo Application

Osteoporosis causes bone fragility and elevates fracture risk. Applications of finite element (FE) analysis (FEA) for assessment of trabecular bone (Tb) microstructural strength at whole‐body computed tomography (CT) imaging are limited due to challenges with Tb microstructural segmentation. We present a nonlinear FEA method for distal tibia CT scans evading binary segmentation of Tb microstructure, while accounting for bone microstructural distribution. First, the tibial axis in a CT scan was aligned with the FE loading axis. FE cubic mesh elements were modeled using image voxels, and CT intensity values were calibrated to ash density defining mechanical properties at individual elements. For FEA of an upright volume of interest (VOI), the bottom surface was fixed, and a constant displacement was applied at each vertex on the top surface simulating different loading conditions. The method was implemented and optimized using the ANSYS software. CT‐derived computational modulus values were repeat scan reproducible (intraclass correlation coefficient [ICC] ≥ 0.97) and highly correlated (r ≥ 0.86) with the micro‐CT (μCT)‐derived values. FEA‐derived von Mises stresses over the segmented Tb microregion were significantly higher (p < 1 × 10⁻¹¹) than that over the marrow space. In vivo results showed that both shear and compressive modulus for males were higher (p < 0.01) than for females. Effect sizes for different modulus measures between males and females were moderate‐to‐high (≥0.55) and reduced to small‐to‐negligible (<0.40) when adjusted for pure lean mass. Among body size and composition attributes, pure lean mass and height showed highest (r ∈ [0.45 0.56]) and lowest (r ∈ [0.25 0.39]) linear correlation, respectively, with FE‐derived modulus measures. In summary, CT‐based nonlinear FEA provides an effective surrogate measure of Tb microstructural stiffness, and the relaxation of binary segmentation will extend the scope for FEA in human studies using in vivo imaging at relatively low‐resolution. © 2022 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Methods for bone quality assessment in human bone tissue: a systematic review

Background

For biomechanical investigations on bone or bone implants, bone quality represents an important potential bias. Several techniques for assessing bone quality have been described in the literature. This study aims to systematically summarize the methods currently available for assessing bone quality in human bone tissue, and to discuss the advantages and limitations of these techniques.

Methods

A systematic review of the literature was carried out by searching the PubMed and Web of Science databases from January 2000 to April 2021. References will be screened and evaluated for eligibility by two independent reviewers as per PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Studies must apply to bone quality assessment with imaging techniques, mechanical testing modalities, and compositional characterization. The terms used for the systematic search were: “(bone quality”. Ti,ab.) AND “(human bone specimens)”.

Results

The systematic review identified 502 relevant articles in total. Sixty-eight articles met the inclusion criteria. Among them, forty-seven articles investigated several imaging modalities, including radiography, dual-energy X-ray absorptiometry (DEXA), CT-based techniques, and MRI-based methods. Nineteen articles dealt with mechanical testing approaches, including traditional testing modalities and novel indentation techniques. Nine articles reported the correlation between bone quality and compositional characterization, such as degree of bone mineralization (DBM) and organic composition. A total of 2898 human cadaveric bone specimens were included.

Conclusions

Advanced techniques are playing an increasingly important role due to their multiple advantages, focusing on the assessment of bone morphology and microarchitecture. Non-invasive imaging modalities and mechanical testing techniques, as well as the assessment of bone composition, need to complement each other to provide comprehensive and ideal information on the bone quality of human bone specimens.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13018-022-03041-4.

Assessment of Bone Microarchitecture in Fresh Cadaveric Human Femurs: What Could Be the Clinical Relevance of Ultra-High Field MRI

MRI could be applied for bone microarchitecture assessment; however, this technique is still suffering from low resolution compared to the trabecular dimension. A clear comparative analysis between MRI and X-ray microcomputed tomography (μCT) regarding microarchitecture metrics is still lacking. In this study, we performed a comparative analysis between μCT and 7T MRI with the aim of assessing the image resolution effect on the accuracy of microarchitecture metrics. We also addressed the issue of air bubble artifacts in cadaveric bones. Three fresh cadaveric femur heads were scanned using 7T MRI and µCT at high resolution (0.051 mm). Samples were submitted to a vacuum procedure combined with vibration to reduce the volume of air bubbles. Trabecular interconnectivity, a new metric, and conventional histomorphometric parameters were quantified using MR images and compared to those derived from µCT at full resolution and downsized resolutions (0.102 and 0.153 mm). Correlations between bone morphology and mineral density (BMD) were evaluated. Air bubbles were reduced by 99.8% in 30 min, leaving partial volume effects as the only source of bias. Morphological parameters quantified with 7T MRI were not statistically different (p > 0.01) to those computed from μCT images, with error up to 8% for both bone volume fraction and trabecular spacing. No linear correlation was found between BMD and all morphological parameters except trabecular interconnectivity (R2 = 0.69 for 7T MRI-BMD). These results strongly suggest that 7T MRI could be of interest for in vivo bone microarchitecture assessment, providing additional information about bone health and quality.

Administration of High-Dose Methylprednisolone Worsens Bone Loss after Acute Spinal Cord Injury in Rats

The administration of high-dose methylprednisolone (MP) for 24–48 h after traumatic spinal cord injury (SCI) has been shown to improve functional recovery. The known adverse effects of MP on skeletal muscle and the immune system, though, have raised clinically relevant safety concerns. However, the effect of MP administration on SCI-induced bone loss has not been evaluated to date. This study examined the adverse effects of high-dose MP administration on skeletal bone after acute SCI in rodents. Male rats underwent spinal cord transection at T3–T4, which was followed by an intravenous injection of MP and subsequent infusion of MP for 24 h. At 2 days, animals were euthanized and hindlimb bone samples were collected. MP significantly reduced bone mineral density (−6.7%) and induced deterioration of bone microstructure (trabecular bone volume/tissue volume, −18.4%; trabecular number, −19.4%) in the distal femur of SCI rats. MP significantly increased expression in the hindlimb bones of osteoclastic genes receptor activator of nuclear factor-κB ligand (RANKL; +402%), triiodothyronine receptor auxiliary protein (+32%), calcitonin receptor (+41%), and reduced osteoprotegerin/RANKL ratio (−72%) compared to those of SCI-vehicle animals. Collectively, 1 day of high-dose MP at a dose comparable to the dosing regimen prescribed to patients who qualify to receive this treatment approach with acute SCI increased loss of bone mass and integrity below the level of lesion than that of animals that had SCI alone, and was associated with further elevation in the expression of genes involved in pathways associated with osteoclastic bone resorption than that observed in SCI animals.

Adaptive local thresholding can enhance the accuracy of HR-pQCT-based trabecular bone morphology assessment

High-resolution peripheral quantitative computed tomography (HR-pQCT) devices can scan extremities at bone microstructural level in vivo and are used mainly in research of bone diseases. Two HR-pQCT scanners are commercially available to date: XtremeCT (first generation) and XtremeCT-II (second generation) from Scanco Medical AG (Switzerland). Recently, we have proposed an adaptive local thresholding (AT) technique and showed that it can improve quantification accuracy of bone microstructural parameters, with visually less sharp cone-beam CT (CBCT) images providing a similar accuracy than XtremeCT. The aim of this study was to evaluate whether the AT segmentation technique could enhance the accuracy of HR-pQCT in quantifying bone microstructural images and to assess whether the agreement between XtremeCT and XtremeCT-II could be improved. Nineteen radii were scanned with three scanners from Scanco Medical AG: (1) XtremeCT at 82 μm, (2) XtremeCT-II at 60.7 μm and (3) the small animal microCT scanner VivaCT40 at 19 μm voxel size. The scans were segmented applying two different methods, once following the manufacturer standard technique (ST), and once by means of AT. Three-dimensional (3D) morphological analysis was performed on the trabecular volume of the segmented images using the manufacturer's standard software to calculate bone volume fraction (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp) and number (Tb.N). The average accuracy of XtremeCT improved from R² = 0.76 (ST) to 0.85 (AT) and reached the same level of accuracy as XtremeCT-II with ST (R² = 0.86). The largest improvements were obtained for BV/TV and Tb.Th. For XtremeCT-II, mean accuracy improved slightly from R² = 0.86 (ST) to 0.89 (AT). For both segmentations and both scanners, the standard section was quantified slightly more accurate than the subchondral section. The agreement between the scanners was enhanced from R² = 0.89 (ST) to 0.98 (AT). In conclusion, AT can enhance the accuracy of XtremeCT to quantify distal radius bone microstructural parameters close to XtremeCT-II level and increases the agreement between the two HR-pQCT scanners. High-resolution peripheral quantitative computed tomography, segmentation, bone microstructural parameters.

Can DXA image-based deep learning model predict the anisotropic elastic behavior of trabecular bone?

3D image-based finite element (FE) and bone volume fraction (BV/TV)/fabric tensor modeling techniques are currently used to determine the apparent stiffness tensor of trabecular bone for assessing its anisotropic elastic behavior. Inspired by the recent success of deep learning (DL) techniques, we hypothesized that DL modeling techniques could be used to predict the apparent stiffness tensor of trabecular bone directly using dual-energy X-ray absorptiometry (DXA) images. To test the hypothesis, a convolutional neural network (CNN) model was trained and validated to predict the apparent stiffness tensor of trabecular bone cubes using their DXA images. Trabecular bone cubes obtained from human cadaver proximal femurs were used to obtain simulated DXA images as input, and the apparent stiffness tensor of the trabecular cubes determined by using micro-CT based FE simulations was used as output (ground truth) to train the DL model. The prediction accuracy of the DL model was evaluated by comparing it with the micro-CT based FE models, histomorphometric parameter based multiple linear regression models, and BV/TV/fabric tensor based multiple linear regression models. The results showed that DXA image-based DL model achieved high fidelity in predicting the apparent stiffness tensor of trabecular bone cubes (R² = 0.905-0.973), comparable to or better than the histomorphometric parameter based multiple linear regression and BV/TV/fabric tensor based multiple linear regression models, thus supporting the hypothesis of this study. The outcome of this study could be used to help develop DXA image-based DL techniques for clinical assessment of bone fracture risk.

A Review on Multiscale Bone Damage: From the Clinical to the Research Perspective

The investigation of bone damage processes is a crucial point to understand the mechanisms of age-related bone fractures. In order to reduce their impact, early diagnosis is key. The intricate architecture of bone and the complexity of multiscale damage processes make fracture prediction an ambitious goal. This review, supported by a detailed analysis of bone damage physical principles, aims at presenting a critical overview of how multiscale imaging techniques could be used to implement reliable and validated numerical tools for the study and prediction of bone fractures. While macro- and meso-scale imaging find applications in clinical practice, micro- and nano-scale imaging are commonly used only for research purposes, with the objective to extract fragility indexes. Those images are used as a source for multiscale computational damage models. As an example, micro-computed tomography (micro-CT) images in combination with micro-finite element models could shed some light on the comprehension of the interaction between micro-cracks and micro-scale bone features. As future insights, the actual state of technology suggests that these models could be a potential substitute for invasive clinical practice for the prediction of age-related bone fractures. However, the translation to clinical practice requires experimental validation, which is still in progress.

Validation of HR-pQCT against micro-CT for morphometric and biomechanical analyses: A review

High-resolution peripheral quantitative computed-tomography (HR-pQCT) has the potential to become a powerful clinical assessment and diagnostic tool. Given the recent improvements in image resolution, from 82 to 61 μm, this technology may be used to accurately quantify in vivo bone microarchitecture, a key biomarker of degenerative bone diseases. However, computational methods to assess bone microarchitecture were developed for micro computed tomography (micro-CT), a higher-resolution technology only available for ex vivo studies, and validation of these computational analysis techniques against the gold-standard micro-CT has been inconsistent and incomplete. Herein, we review methods for segmentation of bone compartments and microstructure, quantification of bone morphology, and estimation of mechanical strength using finite-element analysis, highlighting the need throughout for improved standardization across the field. Studies have relied on homogenous datasets for validation, which does not allow for robust comparisons between methods. Consequently, the adaptation and validation of novel segmentation approaches has been slow to non-existent, with most studies still using the manufacturer's segmentation for morphometric analysis despite the existence of better performing alternative approaches. The promising accuracy of HR-pQCT for capturing morphometric indices is overshadowed by considerable variability in outcomes between studies. For finite element analysis (FEA) methods, the use of disparate material models and FEA tools has led to a fragmented ability to assess mechanical bone strength with HR-pQCT. Further, the scarcity of studies comparing 62 μm HR-pQCT to the gold standard micro-CT leaves the validation of this imaging modality incomplete. This review revealed that without standardization, the capabilities of HR-pQCT cannot be adequately assessed. The need for a public, extendable, heterogeneous dataset of HR-pQCT and corresponding gold-standard micro-CT images, which would allow HR-pQCT users to benchmark existing and novel methods and select optimal methods depending on the scientific question and data at hand, is now evident. With more recent advancements in HR-pQCT, the community must learn from its past and provide properly validated technologies to ensure that HR-pQCT can truly provide value in patient diagnosis and care.

MRI-based assessment of proximal femur strength compared to mechanical testing

Half of the women who sustain a hip fracture would not qualify for osteoporosis treatment based on current DXA-estimated bone mineral density criteria. Therefore, a better approach is needed to determine if an individual is at risk of hip fracture from a fall. The objective of this study was to determine the association between radiation-free MRI-derived bone strength and strain simulations compared to results from direct mechanical testing of cadaveric femora. Imaging was conducted on a 3-Tesla MRI scanner using two sequences: one balanced steady-state free precession sequence with 300 μm isotropic voxel size and one spoiled gradient echo with anisotropic voxel size of 234 × 234 × 1500 μm. Femora were dissected free of soft-tissue and 4350-ohm strain-gauges were securely applied to surfaces at the femoral shaft, inferior neck, greater trochanter, and superior neck. Cadavers were mechanically tested with a hydraulic universal test frame to simulate loading in a sideways fall orientation. Sideways fall forces were simulated on MRI-based finite element meshes and bone stiffness, failure force, and force for plastic deformation were computed. Simulated bone strength metrics from the 300 μm isotropic sequence showed strong agreement with experimentally obtained values of bone strength, with stiffness (r = 0.88, p = 0.0002), plastic deformation point (r = 0.89, p < 0.0001), and failure force (r = 0.92, p < 0.0001). The anisotropic sequence showed similar trends for stiffness, plastic deformation point, and failure force (r = 0.68, 0.70, 0.84; p = 0.02, 0.01, 0.0006, respectively). Surface strain-gauge measurements showed moderate to strong agreement with simulated magnitude strain values at the greater trochanter, superior neck, and inferior neck (r = -0.97, -0.86, 0.80; p ≤0.0001, 0.003, 0.03, respectively). The findings from this study support the use of MRI-based FE analysis of the hip to reliably predict the mechanical competence of the human femur in clinical settings.

Abnormal microarchitecture and stiffness in postmenopausal women with isolated osteoporosis at the 1/3 radius

BACKGROUND

Postmenopausal women with isolated osteoporosis at the 1/3 radius (1/3RO) present a therapeutic dilemma. Little is known about whether these patients have generalized skeletal fragility, and whether this finding warrants treatment. The aim of this study was to investigate the biochemical and microarchitectural phenotype of women with 1/3RO compared to women with classic postmenopausal osteoporosis by DXA at the spine and hip (PMO), and controls without osteoporosis at any site.

METHODS

This cross-sectional study enrolled 266 postmenopausal women, who were grouped according to densitometric pattern. Subjects had serum biochemistries, areal BMD (aBMD) measured by DXA, trabecular and cortical vBMD, microarchitecture, and stiffness by high resolution peripheral QCT (HR-pQCT, voxel size ~82 μm) of the distal radius and tibia.

RESULTS

Mean age was 68 ± 7 years. DXA T-Scores reflected study design. By HR-pQCT, 1/3RO had abnormalities at both radius and tibia compared to controls: lower total, cortical and trabecular vBMD, cortical thickness and trabecular number, higher trabecular separation and heterogeneity, and lower whole bone stiffness. In contrast, the magnitude and pattern of abnormalities in vBMD, microarchitecture and stiffness in 1/3RO were similar to those in PMO; the difference compared to controls was similar among the two groups. Serum calcium, creatinine, parathyroid hormone, 25-hydroxyvitamin D, and 24-hour urine calcium did not differ.

CONCLUSIONS

Although aBMD appeared relatively preserved at the spine and hip by DXA, women with 1/3RO had significant microarchitectural and biomechanical deficits comparable to those in women with typical PMO. Further study is required to guide treatment decisions in this population.

Different subchondral trabecular bone microstructure and biomechanical properties between developmental dysplasia of the hip and primary osteoarthritis

Objective

Developmental dysplasia of the hip (DDH) is recognized as a frequent cause of secondary osteoarthritis (OA). The purpose in this study was to compare structural and biomechanical properties of subchondral trabecular bone ​and its relationship with cartilage damage between patients with DDH and patients with primary hip OA.

Methods

Forty-three femoral head specimens obtained from patients who underwent total hip arthroplasty [DDH, n ​= ​17; primary OA, n ​= ​16; and normal control (NC), n ​= ​10] were scanned by microcomputed tomography and analyzed by individual trabecula segmentation to obtain the microstructural types of subchondral trabecular bone. The biomechanical properties were analyzed by micro-finite element analysis, and cartilage damage was evaluated by histology. The linear regression analysis was used to indicate the association between microstructures, biomechanical property, and articular cartilage.

Results

The DDH group showed the lowest total bone volume fractions (BV/TV) and plate BV/TV in the three groups (p ​< ​0.05). There were also different discrepancies between the three groups in plate/rod trabecular number, plate/rod trabecular thickness, trabecular plate surface area/trabecular rod length, and junction density with different modes (plate-plate, rod-rod, and plate-rod junction density). The micro-finite element analysis, histology, and linear regression revealed that the subchondral trabecular bone in the DDH group had inferior biomechanical properties ​and cartilage damage of patients with DDH was more serious with different subchondral trabecular bone microstructures.

Conclusion

Our findings detected deteriorating subchondral trabecular bone microstructures in patients with DDH. The mass and type of subchondral trabecular bone play a key role in mechanical properties in DDH, which might be related to cartilage damage.

The translational potential of this article

Our findings suggested that changes of subchondral trabecular bone play a critical role ​in DDH progression and that the improvement on subchondral trabecular bone may be a sensitive and promising way in treatment of DDH.

Comparison of methods for assigning the material properties of the distraction callus in computational models

In silico models of distraction osteogenesis and fracture healing usually assume constant mechanical properties for the new bone tissue generated. In addition, these models do not always account for the porosity of the woven bone and its evolution. In this study, finite element analyses based on computed tomography (CT) are used to predict the stiffness of the callus until 69 weeks after surgery using 15 CT images obtained at different stages of an experiment on bone transport, technique in which distraction osteogenesis is used to correct bone defects. Three different approaches were used to assign the mechanical properties to the new bone tissue. First, constant mechanical properties of the hard callus tissue and no porosity were assumed. Nevertheless, this approach did not show good correlations. Second, random variations in the elastic modulus and porosity of the woven bone were taken from previous experimental studies. Finally, the elastic properties of each element were assigned depending on gray scale in CT images. The numerically predicted callus stiffness was compared with previous in vivo measurements. It was concluded firstly that assignment depending on gray scale is the method that provides the best results and secondly that the method that considers a random distribution of porosity and elastic modulus of the callus is also suitable to predict the callus stiffness from 15 weeks after surgery. This finding provides a method for assigning the material properties of the distraction callus, which does not require CT images and may contribute to improve current in silico models.

Next-generation imaging of the skeletal system and its blood supply

Bone is organized in a hierarchical 3D architecture. Traditionally, analysis of the skeletal system was based on bone mass assessment by radiographic methods or on the examination of bone structure by 2D histological sections. Advanced imaging technologies and big data analysis now enable the unprecedented examination of bone and provide new insights into its 3D macrostructure and microstructure. These technologies comprise ex vivo and in vivo methods including high-resolution computed tomography (CT), synchrotron-based imaging, X-ray microscopy, ultra-high-field magnetic resonance imaging (MRI), light-sheet fluorescence microscopy, confocal and intravital two-photon imaging. In concert, these techniques have been used to detect and quantify a novel vascular system of trans-cortical vessels in bone. Furthermore, structures such as the lacunar network, which harbours and connects osteocytes, become accessible for 3D imaging and quantification using these methods. Next-generation imaging of the skeletal system and its blood supply are anticipated to contribute to an entirely new understanding of bone tissue composition and function, from macroscale to nanoscale, in health and disease. These insights could provide the basis for early detection and precision-type intervention of bone disorders in the future.

Regional Variations of HR-pQCT Morphological and Biomechanical Measurements of the Distal Radius and Tibia and Their Associations with Whole Bone Mechanical Properties

High-resolution peripheral quantitative computed tomography (HRpQCT) is a promising imaging modality that provides in vivo three-dimensional assessment of bone microstructure by scanning fixed regions of the distal radius and tibia. However, how microstructural parameters and mechanical analysis based on these segment scans correlate to whole distal radius and tibia mechanics is not well-characterized. On 26 sets of cadaveric radius and tibia, HRpQCT scans were performed on the standard scan segment, a segment distal to the standard segment, and a segment proximal to the standard segment. Whole distal bone stiffness was determined through mechanical testing. Segment bone stiffness was estimated using linear finite element (FE) analysis based on segment scans. Standard morphological and Individual Trabecula Segmentation (ITS) analyses were used estimate microstructural properties. Significant variations in microstructural parameters were observed among segments at both sites. Correlation to whole distal bone stiffness was moderate for microstructural parameters at the standard segment, but correlation was significantly increased for FE-predicted segment bone stiffness based on standard segment scans. Similar correlation strengths were found between FE-predicted segment bone stiffness and whole distal bone stiffness. Additionally, microstructural parameters at the distal segment had higher correlation to whole distal bone stiffness than at standard or proximal segments. Our results suggest that FE-predicted segment stiffness is a better predictor of whole distal bone stiffness for clinical HRpQCT analysis, and that microstructural parameters at the distal segment is more highly correlated with whole distal bone stiffness than at the standard or proximal segments.

A Randomized Placebo-Controlled Trial of Low- Versus Moderate-Dose Vitamin D3 Supplementation on Bone Mineral Density in Postmenopausal Women With HIV

BACKGROUND

Prevalence of osteoporosis and fracture is increased among older people with HIV. We compared the effects of low (1000 IU) vs moderate (3000 IU) vitamin D3 (VitD) supplementation on areal bone mineral density (aBMD) and volumetric bone mineral density (vBMD) in African American and Hispanic postmenopausal women with HIV on antiretroviral therapy.

METHODS

We performed a 12-month prospective, randomized, double-blind, placebo-controlled study with primary outcomes of change in aBMD by dual-energy X-ray absorptiometry (DXA) and secondary outcomes of change in vBMD by quantitative computed tomography and bone turnover markers. An intent-to-treat analysis was performed on 85 randomized subjects (43 low and 42 moderate) for primary DXA outcomes, and complete case analysis was performed for secondary outcomes.

RESULTS

Mean age was 56 ± 5 years, median CD4 count was 722 cells/mm, and 74% had HIV RNA ≤ 50 copies/mL. Serum 25-OHD was higher in the moderate than low VitD group at 6 months (33.1 ± 10.3 vs 27.8 ± 8.1 ng/mL, P = 0.03) and 12 months, but parathyroid hormone levels remained similar. Percent change in aBMD, vBMD, and bone turnover markers did not differ between low and moderate VitD groups before or after adjustment for baseline aBMD.

CONCLUSIONS

VitD supplementation at 3000 IU daily increased mean total 25-OHD levels in postmenopausal women with HIV, but we did not find evidence of an effect on BMD beyond those observed with 1000 IU daily. Future studies are necessary to determine whether VitD supplementation is beneficial in this patient population, and if so, what dose is optimal for skeletal health.

Histological Scoring Method to Assess Bone Healing in Critical Size Bone Defect Models

Large bone defects are a major problem in trauma and orthopedic surgery. Tissue engineering based treatments have emerged as promising alternatives to traditional bone grafting techniques. Critical size bone defect animal models have been developed and widely used to evaluate and compare therapeutic effectiveness in bone tissue engineering treatments. To measure healing in a given defect after treatment, histological assessment methods are commonly used. These histological methods are typically qualitative and only measure the amount of newly formed bone. In this study, we introduce a new histological scoring method that in addition to new bone formation also measures newly formed "cartilage," "fibrous tissue," and "remnant bone defect size." Using Kappa analysis and interclass correlation analysis, we verified the reliability of our new scoring method. These additional parameters make it possible to differentiate between the hard callus and soft callus phases of healing and, thus, derive more valuable information about the effect different tissue-engineering treatments have on the healing process.

Bone microarchitecture of the tibial plateau in skeletal health and osteoporosis

BACKGROUND

Impaired bone structure poses a challenge for the treatment of osteoporotic tibial plateau fractures. As knowledge of region-specific structural bone alterations is a prerequisite to achieving successful long-term fixation, the aim of the current study was to characterize tibial plateau bone structure in patients with osteoporosis and the elderly.

METHODS

Histomorphometric parameters were assessed by high-resolution peripheral quantitative computed tomography (HR-pQCT) in 21 proximal tibiae from females with postmenopausal osteoporosis (mean age: 84.3 ± 4.9 years) and eight female healthy controls (45.5 ± 6.9 years). To visualize region-specific structural bony alterations with age, the bone mineral density (Hounsfield units) was additionally analyzed in 168 human proximal tibiae. Statistical analysis was based on evolutionary learning using globally optimal regression trees.

RESULTS

Bone structure deterioration of the tibial plateau due to osteoporosis was region-specific. Compared to healthy controls (20.5 ± 4.7%) the greatest decrease in bone volume fraction was found in the medio-medial segments (9.2 ± 3.5%, p < 0.001). The lowest bone volume was found in central segments (tibial spine). Trabecular connectivity was severely reduced. Importantly, in the anterior and posterior 25% of the lateral and medial tibial plateaux, trabecular support and subchondral cortical bone thickness itself were also reduced.

CONCLUSION

Thinning of subchondral cortical bone and marked bone loss in the anterior and posterior 25% of the tibial plateau should require special attention when osteoporotic patients require fracture fixation of the posterior segments. This knowledge may help to improve the long-term, fracture-specific fixation of complex tibial plateau fractures in osteoporosis.

Synchrotron inline phase contrast µCT enables detailed virtual histology of embedded soft-tissue samples with and without staining

Synchrotron radiation micro-computed tomography (SRµCT) based virtual histology, in combination with dedicated ex vivo staining protocols and/or phase contrast, is an emerging technology that makes use of three-dimensional images to provide novel insights into the structure of tissue samples at microscopic resolution with short acquisition times of the order of minutes or seconds. However, the high radiation dose creates special demands on sample preparation and staining. As a result of the lack of specific staining in virtual histology, it can supplement but not replace classical histology. Therefore, the aim of this study was to establish and compare optimized ex vivo staining and acquisition protocols for SRµCT-based virtual histology of soft-tissue samples, which could be integrated into the standard workflow of classical histology. The high grade of coherence of synchrotron radiation allows the application of propagation-based phase contrast imaging (PBI). In this study, PBI yielded a strong increase in image quality even at lower radiation doses and consequently prevented any damage to the tissue samples or the embedding material. This work has demonstrated that the improvement in contrast-to-noise ratio by PBI enabled label-free virtual histology of soft-tissue specimens embedded in paraffin to a level of detail that exceeds that achieved with staining protocols.

Effect of treat-to-target strategies on bone erosion progression in early rheumatoid arthritis: An HR-pQCT study

OBJECTIVES

To investigate the efficacy of two tight-control treatment strategies aimed at simplified disease activity score [SDAI] remission (SDAI ≤ 3.3) compared to DAS28 remission (DAS28 < 2.6) on progression of bone erosions in early rheumatoid arthritis (ERA) patients using high-resolution peripheral quantitative computed tomography (HR-pQCT).

METHODS

This was an open-label study in which 80 early RA patients were randomized to receive 1-year of tight-control treatment. Group 1 (n = 37) aimed at SDAI ≤ 3.3 and group 2 (n = 43) aimed at DAS28-CRP < 2.6. The number and size of bone erosions, as well as the bone mineral density (BMD) surrounding bone erosion at the second metacarpophalangeal joint (MCP2), were measured at baseline and 12 months.

RESULTS

After 12 months, images were analyzed in 63 patients. Changes in clinical parameters, number and size of bone erosions as well as the BMD surrounding bone erosion between the two treatment groups were similar. Therefore, a post-hoc analysis including all 63 patients was performed to elucidate the independent predictors of erosion progression and repair. Multivariate analysis revealed that not achieving sustained SDAI remission at month 6, 9 and 12 (p = 0.034) and rheumatoid factor >16U (p = 0.021) were independent predictors associated with an increase in erosion volume. Logistic regression analysis showed that achieving sustained SDAI remission (p = 0.043) was associated with partial erosion repair.

CONCLUSIONS

Although more stringent treatment target did not notably affect clinical treatment outcome and erosion progression at 1 year, achieving sustained SDAI remission was found to be associated with partial erosion repair.

Accuracy of MRI-based finite element assessment of distal tibia compared to mechanical testing

High-resolution MRI-derived finite element analysis (FEA) has been used in translational research to estimate the mechanical competence of human bone. However, this method has yet to be validated adequately under in vivo imaging spatial resolution or signal-to-noise conditions. We therefore compared MRI-based metrics of bone strength to those obtained from direct, mechanical testing. The study was conducted on tibiae from 17 human donors (12 males and five females, aged 33 to 88years) with no medical history of conditions affecting bone mineral homeostasis. A 25mm segment from each distal tibia underwent MR imaging in a clinical 3-Tesla scanner using a fast large-angle spin-echo (FLASE) sequence at 0.137mm×0.137mm×0.410mm voxel size, in accordance with in vivo scanning protocol. The resulting high-resolution MR images were processed and used to generate bone volume fraction maps, which served as input for the micro-level FEA model. Simulated compression was applied to compute stiffness, yield strength, ultimate strength, modulus of resilience, and toughness, which were then compared to metrics obtained from mechanical testing. Moderate to strong positive correlations were found between computationally and experimentally derived values of stiffness (R²=0.77, p<0.0001), yield strength (R²=0.38, p=0.0082), ultimate strength (R²=0.40, p=0.0067), and resilience (R²=0.46, p=0.0026), but only a weak, albeit significant, correlation was found for toughness (R²=0.26, p=0.036). Furthermore, experimentally derived yield strength and ultimate strength were moderately correlated with MRI-derived stiffness (R²=0.48, p=0.0022 and R²=0.58, p=0.0004, respectively). These results suggest that high-resolution MRI-based finite element (FE) models are effective in assessing mechanical parameters of distal skeletal extremities.

Impaired bone strength estimates at the distal tibia and its determinants in adolescents with anorexia nervosa

BACKGROUND

Altered bone microarchitecture and higher marrow adipose tissue (MAT) may reduce bone strength. High resolution pQCT (HRpQCT) allows assessment of volumetric BMD (vBMD), and size and microarchitecture parameters of bone, while 1H-magnetic resonance spectroscopy (1H-MRS) allows MAT evaluation. We have reported impaired microarchitecture at the non-weight bearing radius in adolescents with anorexia nervosa (AN) and that these changes may precede aBMD deficits. Data are lacking regarding effects of AN on microarchitecture and strength at the weight-bearing tibia in adolescents and young adults, and the impact of changes in microarchitecture and MAT on strength estimates.

OBJECTIVE

To compare strength estimates at the distal tibia in adolescents/young adults with AN and controls in relation to vBMD, bone size and microarchitecture, and spine MAT.

DESIGN AND METHODS

This was a cross-sectional study of 47 adolescents/young adults with AN and 55 controls 14-24years old that assessed aBMD and body composition using DXA, and distal tibia vBMD, size, microarchitecture and strength estimates using HRpQCT, extended cortical analysis, individual trabecular segmentation, and finite element analysis. Lumbar spine MAT (1H-MRS) was assessed in a subset of 19 AN and 22 controls.

RESULTS

Areal BMD Z-scores were lower in AN than controls. At the tibia, AN had greater cortical porosity, lower total and cortical vBMD, cortical area and thickness, trabecular number, and strength estimates than controls. Within AN, strength estimates were positively associated with lean mass, aBMD, vBMD, bone size and microarchitectural parameters. MAT was higher in AN, and associated inversely with strength estimates.

CONCLUSIONS

Adolescents/young adults with AN have impaired microarchitecture at the weight-bearing tibia and higher spine MAT, associated with reduced bone strength.

The Efficacy of Low-intensity Vibration to Improve Bone Health in Patients with End-stage Renal Disease Is Highly Dependent on Compliance and Muscle Response

RATIONAL AND OBJECTIVES

Low intensity vibration (LIV) may represent a nondrug strategy to mitigate bone deficits in patients with end-stage renal disease.

MATERIALS AND METHODS

Thirty end-stage renal patients on maintenance hemodialysis were randomized to stand for 20 minutes each day on either an active or placebo LIV device. Analysis at baseline and completion of 6-month intervention included magnetic resonance imaging (tibia and fibula stiffness; trabecular thickness, number, separation, bone volume fraction, plate-to-rod ratio; and cortical bone porosity), dual-energy X-ray absorptiometry (hip and spine bone mineral density [BMD]), and peripheral quantitative computed tomography (tibia trabecular and cortical BMD; calf muscle cross-sectional area).

RESULTS

Intention-to-treat analysis did not show any significant changes in outcomes associated with LIV. Subjects using the active device and with greater than the median adherence (70%) demonstrated an increase in distal tibia stiffness (5.3%), trabecular number (1.7%), BMD (2.3%), and plate-to-rod ratio (6.5%), and a decrease in trabecular separation (-1.8%). Changes in calf muscle cross-sectional area were associated with changes in distal tibia stiffness (R = 0.85), trabecular bone volume/total volume (R = 0.91), number (R = 0.92), and separation (R = -0.94) in the active group but not in the placebo group. Baseline parathyroid hormone levels were positively associated with increased cortical bone porosity over the 6-month study period in the placebo group (R = 0.55) but not in the active group (R = 0.01). No changes were observed in the nondistal tibia locations for either group except a decrease in hip BMD in the placebo group (-1.7%).

CONCLUSION

Outcomes and adherence thresholds identified from this pilot study could guide future longitudinal studies involving vibration therapy.

MRI assessment of bone structure and microarchitecture

Osteoporosis is a disease of weak bone and increased fracture risk caused by low bone mass and microarchitectural deterioration of bone tissue. The standard-of-care test used to diagnose osteoporosis, dual-energy x-ray absorptiometry (DXA) estimation of areal bone mineral density (BMD), has limitations as a tool to identify patients at risk for fracture and as a tool to monitor therapy response. Magnetic resonance imaging (MRI) assessment of bone structure and microarchitecture has been proposed as another method to assess bone quality and fracture risk in vivo. MRI is advantageous because it is noninvasive, does not require ionizing radiation, and can evaluate both cortical and trabecular bone. In this review article, we summarize and discuss research progress on MRI of bone structure and microarchitecture over the last decade, focusing on in vivo translational studies. Single-center, in vivo studies have provided some evidence for the added value of MRI as a biomarker of fracture risk or treatment response. Larger, prospective, multicenter studies are needed in the future to validate the results of these initial translational studies.

LEVEL OF EVIDENCE

5 Technical Efficacy: Stage 5 J. MAGN. RESON. IMAGING 2017;46:323-337.

Clinical Evaluation of Bone Strength and Fracture Risk

PURPOSE OF REVIEW

This paper seeks to evaluate and compare recent advances in the clinical assessment of the changes in bone mechanical properties that take place as a result of osteoporosis and other metabolic bone diseases and their treatments.

RECENT FINDINGS

In addition to the standard of DXA-based areal bone mineral density (aBMD), a variety of methods, including imaging-based structural measurements, finite element analysis (FEA)-based techniques, and alternate methods including ultrasound, bone biopsy, reference point indentation, and statistical shape and density modeling, have been developed which allow for reliable prediction of bone strength and fracture risk. These methods have also shown promise in the evaluation of treatment-induced changes in bone mechanical properties. Continued technological advances allowing for increasingly high-resolution imaging with low radiation dose, together with the expanding adoption of DXA-based predictions of bone structure and mechanics, as well as the increasing awareness of the importance of bone material properties in determining whole-bone mechanics, lead us to anticipate substantial future advances in this field.

Impaired Bone Microarchitecture Improves After One Year On Gluten-Free Diet: A Prospective Longitudinal HRpQCT Study in Women With Celiac Disease

We have recently identified a significant deterioration of bone microarchitecture in premenopausal women with newly diagnosed celiac disease (CD) using high-resolution peripheral quantitative computed tomography (HRpQCT). The aim of this work was to assess changes in bone microarchitecture after 1 year on a gluten-free diet (GFD) in a cohort of premenopausal women. We prospectively enrolled 31 consecutive females at diagnosis of CD; 26 of them were reassessed 1 year after GFD. They all underwent HRpQCT scans of distal radius and tibia, areal BMD by DXA, and biochemical tests (bone-specific parameters and CD serology) at both time points. Secondary, we compared 1-year results with those of a control group of healthy premenopausal women of similar age and BMI in order to assess whether the microarchitectural parameters of treated CD patients had reached the values expected for their age. Compared with baseline, the trabecular compartment in the distal radius and tibia improved significantly (trabecular density, trabecular/bone volume fraction [BV/TV] [p < 0.0001], and trabecular thickness [p = 0.0004]). Trabecular number remained stable in both regions. Cortical density increased only in the tibia (p = 0.0004). Cortical thickness decreased significantly in both sites (radius: p = 0.03; tibia: p = 0.05). DXA increased in all regions (lumbar spine [LS], p = 0.01; femoral neck [FN], p = 0.009; ultradistal [UD] radius, p = 0.001). Most parameters continued to be significantly lower than those of healthy controls. This prospective HRpQCT study showed that most trabecular parameters altered at CD diagnosis improved significantly by specific treatment (GFD) and calcium and vitamin D supplementation. However, there were still significant differences with a control group of women of similar age and BMI. In the prospective follow-up of this group of patients we expect to be able to assess whether bone microarchitecture attains levels expected for their age. © 2016 American Society for Bone and Mineral Research.

Imaging in osteoporosis in rheumatic diseases

Osteoporosis is a common comorbidity of all major rheumatic diseases, and manifests itself both systemically and locally. Systemic bone loss manifests because of several factors, primarily inflammation, immobility, and commonly used medical treatment for rheumatic diseases. Local bone loss manifests as periarticular demineralization and bone erosion due to local release of inflammatory agents and cytokines, which promote bone resorption. All these factors contribute to the phenomenon of arthritis-associated osteoporosis. This review summarized the currently available and used methods that play a role in the diagnosis and monitoring of osteoporosis and in the detection of osteoporotic fractures.

Deterioration of trabecular plate-rod and cortical microarchitecture and reduced bone stiffness at distal radius and tibia in postmenopausal women with vertebral fractures

Postmenopausal women with vertebral fractures have abnormal bone microarchitecture at the distal radius and tibia by HR-pQCT, independent of areal BMD. However, whether trabecular plate and rod microarchitecture is altered in women with vertebral fractures is unknown. This study aims to characterize the abnormalities of trabecular plate and rod microarchitecture, cortex, and bone stiffness in postmenopausal women with vertebral fractures. HR-pQCT images of distal radius and tibia were acquired from 45 women with vertebral fractures and 45 control subjects without fractures. Trabecular and cortical compartments were separated by an automatic segmentation algorithm and subjected to individual trabecula segmentation (ITS) analysis for measuring trabecular plate and rod morphology and cortical bone evaluation for measuring cortical thickness and porosity, respectively. Whole bone and trabecular bone stiffness were estimated by finite element analysis. Fracture and control subjects did not differ according to age, race, body mass index, osteoporosis risk factors, or medication use. Women with vertebral fractures had thinner cortices, and larger trabecular area compared to the control group. By ITS analysis, fracture subjects had fewer trabecular plates, less axially aligned trabeculae and less trabecular connectivity at both the radius and the tibia. Fewer trabecular rods were observed at the radius. Whole bone stiffness and trabecular bone stiffness were 18% and 22% lower in women with vertebral fractures at the radius, and 19% and 16% lower at the tibia, compared with controls. The estimated failure load of the radius and tibia were also reduced in the fracture subjects by 13% and 14%, respectively. In summary, postmenopausal women with vertebral fractures had both trabecular and cortical microstructural deterioration at the peripheral skeleton, with a preferential loss of trabecular plates and cortical thinning. These microstructural deficits translated into lower whole bone and trabecular bone stiffness at the radius and tibia. Our results suggest that abnormalities in trabecular plate and rod microstructure may be important mechanisms of vertebral fracture in postmenopausal women.

High-resolution peripheral quantitative computed tomography (HR-pQCT) can assess microstructural and biomechanical properties of both human distal radius and tibia: Ex vivo computational and experimental validations

High-resolution peripheral quantitative computed tomography (HR-pQCT) provides in vivo three-dimensional (3D) imaging at the distal radius and tibia and has been increasingly used to characterize cortical and trabecular bone morphology in clinical studies. In this study, we comprehensively examined the accuracy of HR-pQCT and HR-pQCT based micro finite element (μFE) analysis predicted bone elastic stiffness and strength through comparisons with gold-standard micro computed tomography (μCT) based morphological/μFE measures and direct mechanical testing results. Twenty-six sets of human cadaveric distal radius and tibia segments were imaged by HR-pQCT and μCT. Microstructural analyses were performed for the registered HR-pQCT and μCT images. Bone stiffness and yield strength were determined by both HR-pQCT and μCT based linear and nonlinear μFE predictions and mechanical testing. Our results suggested that strong and significant correlations existed between the HR-pQCT standard, model-independent and corresponding μCT measurements. HR-pQCT based nonlinear μFE overestimated stiffness and yield strength while the linear μFE underestimated yield strength, but both were strongly correlated with those predicted by μCT μFE and measured by mechanical testing at both radius and tibia (R(2)>0.9). The microstructural differences between HR-pQCT and μCT were also examined by the Bland-Altman plots. Our results showed HR-pQCT morphological measurements of BV/TV(d), Tb.Th, and Tb.Sp, can be adjusted by correction values to approach true values measured by gold-standard μCT. In addition, we observed moderate correlations of HR-pQCT biomechanical and microstructural parameters between the distal radius and tibia. We concluded that morphological and mechanical properties of human radius and tibia bone can be assessed by HR-pQCT based measures.

Emerging role of high-resolution imaging in the detection of renal osteodystrophy

The term renal osteodystrophy refers to changes in bone morphology induced by chronic kidney disease (CKD) and represents the skeletal component of the entity 'chronic kidney disease - mineral and bone disorder'. Changes in turnover, mineralization, mass and microarchitecture impair bone quality, compromising strength and increasing susceptibility to fractures. Fractures are more common in CKD compared with the general population and result in increased morbidity and mortality. Screening for fracture risk and management of renal osteodystrophy are hindered by the complex, and still only partially understood, pathophysiology and the inadequacy of currently available diagnostic methods. Bone densitometry and bone turnover markers, although potentially helpful, have significant limitations in patients with CKD, and the 'gold standard' test of bone biopsy is infrequently performed in routine clinical practice. However, recent advances in high-resolution bone microarchitecture imaging may offer greater potential for quantification and assessment of bone structure and strength and, when used in conjunction with serum biomarkers, may allow non-invasive testing for a diagnostic virtual bone biopsy.

Radiology of Osteoporosis

The radiologist has a number of roles not only in diagnosing but also in treating osteoporosis. Radiologists diagnose fragility fractures with all imaging modalities, which includes magnetic resonance imaging (MRI) demonstrating radiologically occult insufficiency fractures, but also lateral chest radiographs showing asymptomatic vertebral fractures. In particular MRI fragility fractures may have a nonspecific appearance and the radiologists needs to be familiar with the typical locations and findings, to differentiate these fractures from neoplastic lesions. It should be noted that radiologists do not simply need to diagnose fractures related to osteoporosis but also to diagnose those fractures which are complications of osteoporosis related pharmacotherapy. In addition to using standard radiological techniques radiologists also use dual-energy x-ray absorptiometry (DXA) and quantitative computed tomography (QCT) to quantitatively assess bone mineral density for diagnosing osteoporosis or osteopenia as well as to monitor therapy. DXA measurements of the femoral neck are also used to calculate osteoporotic fracture risk based on the Fracture Risk Assessment Tool (FRAX) score, which is universally available. Some of the new technologies such as high-resolution peripheral computed tomography (HR-pQCT) and MR spectroscopy allow assessment of bone architecture and bone marrow composition to characterize fracture risk. Finally radiologists are also involved in the therapy of osteoporotic fractures by using vertebroplasty, kyphoplasty, and sacroplasty. This review article will focus on standard techniques and new concepts in diagnosing and managing osteoporosis.

Quantification of skeletal growth, modeling, and remodeling by in vivo micro computed tomography

In this study we established an image analysis scheme for the investigation of cortical and trabecular bone development during skeletal growth and tested this concept on in vivo μCT images of rats. To evaluate its efficacy, we applied the technique to young (1-month-old) and adult (3-month-old) rat tibiae with vehicle (Veh) or intermittent parathyroid hormone (PTH) treatment. By overlaying 2 sequential scans based on their distinct trabecular microarchitecture, we calculated the linear growth rate of young rats to be 0.31 mm/day at the proximal tibia. Due to rapid growth (3.7 mm in 12 days), the scanned bone region at day 12 had no overlap with the bone tissue scanned at day 0. Instead, the imaged bone region at day 12 represented newly generated bone tissue from the growth plate. The new bone of the PTH-treated rats had significantly greater trabecular bone volume fraction, number, and thickness than those of the Veh-treated rats, indicating PTH's anabolic effect on bone modeling. In contrast, the effect of PTH on adult rat trabecular bone was found to be caused by PTH's anabolic effect on bone remodeling. The cortical bone at the proximal tibia of young rats also thickened more in the PTH group (23%) than the Veh group (14%). This was primarily driven by endosteal bone formation and coalescence of trabecular bone into the cortex. This process can be visualized by aligning the local bone structural changes using image registration. As a result, the cortex after PTH treatment was 31% less porous, and had a 22% greater polar moment of inertia compared to the Veh group. Lastly, we monitored the longitudinal bone growth in adult rats by measuring the distance of bone flow away from the proximal tibial growth plate from 3 months to 19 months of age and discovered a total of 3.5mm growth in 16 months. It was demonstrated that this image analysis scheme can efficiently evaluate bone growth, bone modeling, and bone remodeling, and is ready to be translated into a clinical imaging platform.

Human trabecular bone microarchitecture can be assessed independently of density with second generation HR-pQCT

The second generation HR-pQCT scanner (XtremeCTII, Scanco Medical) can assess human bone microarchitecture of peripheral limbs with a 61 μm nominal isotropic voxel size. This is a marked improvement from the first generation HR-pQCT that had a nominal isotropic voxel size of 82 μm, which is at the limit to accurately determine the thickness of individual human trabeculae. We sought to determine the accuracy of a direct morphometric approach to measure trabecular bone microarchitecture with three-dimensional morphological techniques using second generation HR-pQCT, and to compare this with the approach currently applied by the first generation HR-pQCT scanner based on derived indices using ex vivo scans of human cadaveric radii. We also compared images acquired and resampled to mimic the first generation HR-pQCT with those obtained directly from the first generation HR-pQCT. We evaluated 20 human cadaveric radii and a micro-CT performance phantom using the first (XtremeCT, Scanco Medical) and second generation HR-pQCT scanner (XtremeCTII) and compared a patient evaluation (XCTII, 61 μm) with a high resolution ex vivo protocol (HR, 30μm). We generated 82 μm scans of the same specimens to mimic a first-generation HR-pQCT evaluation (XCTIM, 82 μm) and compared these with a first-generation patient evaluation (XCTI, 82 μm). A standard structural extraction approach was applied to both XCTII and HR evaluations for assessment of bone volume fraction (BV/TV), and a distance transform was used to assess trabecular number (Tb.N), trabecular thickness (Tb.Th) and trabecular separation (Tb.Sp). For XCTI and XCTIM evaluations we followed the manufacturer's standard procedure and assessed bone mineral density (BMD), Tb.N with a distance transform, and then derived bone volume ratio (BV/TV(d)), trabecular thickness (Tb.Th(d)) and separation (Tb.Sp(d)). The spatial resolution (10% MTF) was 142.2 μm for XCTI, 108.9 μm for XCTIM, 95.2μm for XCTII, and 55.9 μm for HR. XCTI and XCTIM provided strongly associated measurements of BMD and microarchitectural outcomes (R(2)>0.97), however there were systematic differences in all outcomes. The Tb.N was highly associated with HR by both XCTII (R(2)=0.93, mean error=-0.12 mm(-1)) and XCTIM (R(2)=0.98, mean error=0.25 mm(-1)). Also, both XCTII (R(2)=0.99, mean error=0.20mm) and XCTIM (R(2)=0.99, mean error=-0.18 mm) had Tb.Sp that were strongly related to HR. For Tb.Th, the XCTII was more closely related to HR (R(2)=0.94, mean error=0.04 mm) than the relatively weak XCTIM (R(2)=0.16, mean error=- 0.076 mm). We found that trabecular microarchitecture assessment following the XCTII direct morphometric approach accurately represented the HR data. In particular, the measure of Tb.Th was markedly improved for XCTII compared with the derived approach of XCTIM. These data support the application of analysis techniques in HR-pQCT that are analogous to those traditionally used for micro-CT to assess trabecular microarchitecture. The decreased dependence of structural outcomes on density provides a new, important opportunity to monitor human in vivo bone microarchitecture.