Excess electron is trapped in a large single molecular cage C60F60

THF-Assisted CO2 Reduction Catalyzed by Electride Mg2EP: Insight from DFT Calculations

Hydroboration and hydrogenation reductions of CO2 catalyzed by a porphyrinoid-based dimagnesium(I) electride (Mg2EP) were investigated by density functional theory calculations. Herein, the presence of potentially excess electrons located at the Mg-Mg bond endows Mg2EP with the ability to activate small molecules such as CO2, HBpin, and H2, thus opening up the possibility for further CO2 conversion. The Mg2EP-catalyzed hydroboration of CO2 to HCOOBpin is predicted to have relatively higher activity in comparison to the hydrogenation reduction to formic acid (HCOOH). Interestingly, the common solvent molecule tetrahydrofuran as an auxiliary can coordinate with the Mg center to effectively weaken the bonding interaction between the dimagnesium center and the intermediate species from the CO2 conversion, thereby promoting the catalytic cycle for the CO2 hydroboration. The present results suggest that the electride Mg2EP is promising for the molecular catalyst in the CO2 transformation.

In Silico Design and Characterization of a New Molecular Electride: Li@Calix[3]Pyrrole

Electrides, in which anionic electrons are localized independently of the atoms in the compound, have shown promise, especially as catalysts and optoelectronic materials. Here, we present a new computationally designed molecular electride, Li@calix[3]pyrrole (Li@C3P). Electron density and electron localization function analyses unequivocally confirm the existence of localized electride electron density, outside the system, independent of any specific atoms. Non-covalent interaction plots further validate the character of the isolated localized electron, suggesting that the system can be accurately represented by Li+@calix[3]pyrrole ⋅ e-, denoting its distinct charge separation. The remarkable non-linear optical properties of Li@C3P, including average polarizability,α ‾ ${\bar{\alpha }}$ =412.4 au, first hyperpolarizability, β=4.46×104 au, and second hyperpolarizability,γ ∥ ${{\gamma }_{\parallel }}$ =18.40×106 au, are unparalleled in the previously reported and similar Li@C4P molecular electride. Furthermore, energy decomposition analysis in combination with natural orbital for chemical valence theory sheds light on the mechanism of electron density transfer from Li to the C3P cage, yielding the charge-separated Li@C3P complex. In addition to the electron transfer, a key factor to its electride nature is the electronic structure of the CnP cage, which has its lowest unoccupied molecular orbital located in the void adjacent to the N-H groups at the back of the bowl-shaped CnP cage.

Metalloborospherenes with a Stabilized Classical Fullerene-like Borospherene B40 Act as Nonlinear Optical Switches, Electron Reservoirs, Molecular Capacitors, and Molecular Reactors

Using a new method of η5-Li and η6-Mg atoms capping the faces of the classical fullerene-like borospherene Td B40, we theoretically predict an exohedral metalloborospherene Td Mg10Li12&B40 molecule. Remarkably, a newfangled endoexo cage isomerism is proposed. Further, embedding Mg atoms in the Td B40 cage forms endohedral derivatives. Due to the intramolecular pull-push electron transfer relay, these obtained molecules possess unequal multilayered and alternant spherical charge distribution. The outer is an excess electron layer, bringing a molecular nonlinear switch character and an electron reservoir behavior with strong electron-donating and -accepting abilities. The middle (Mg2+)10(Li+)12 and the outer layers together constitute an electric double layer, presenting the behavior of a molecular capacitor where the electronic charge-discharge process occurs in the outer excess electron layer. The inner part is an empty cage B4026- with a strong negative electric field. The valence electrons of the embedded Mg atoms are transformed into new excess electrons and added in the outer excess electron layer, also exhibiting the charging behavior of the molecular capacitor. Considering the chemical reaction in the inner cage, the embedded Mg atom is ionized, forming an Mg2+ cation and 2e under the strong negative electric field; meanwhile, 2e is powerfully pushed into the outer excess electron layer. This chemical process shows a generalized Coulomb explosion, and thus the exohedral metalloborospherene molecules with cage B4026- may act as molecular reactors. The new species mark the genesis of classical fullerene-like borospherene chemistry and stimulate their applications in molecular nonlinear optical and nanoelectronics.

About Perfluoropolyhedranes, Their Electron-Accepting Ability and Questionable Supramolecular Hosting Capacity

Polyhedral molecules are appealing for their eye-catching architecture and distinctive chemistry. Perfluorination of such, often greatly strained, compounds is a momentous challenge. It drastically changes the electron distribution, structure and properties. Notably, small high-symmetry perfluoropolyhedranes feature a centrally located, star-shaped low-energy unoccupied molecular orbital that can host an extra electron within the polyhedral frame, thus producing a radical anion, without loss of symmetry. This predicted electron-hosting capacity was definitively established for perfluorocubane, the first perfluorinated Platonic polyhedrane to be isolated pure. Hosting atoms, molecules, or ions in such "cage" structures is, however, all but forthright, if not illusionary, offering no easy access to supramolecular constructs. While adamantane and cubane have fostered numerous applications in materials science, medicine, and biology, specific uses for their perfluorinated counterparts remain to be established. Some aspects of highly fluorinated carbon allotropes, such as fullerenes and graphite, are briefly mentioned for context.

Molecular Electrides: An In Silico Perspective

Electrides are defined as the ionic compounds where the electron(s) serves as an anion. These electron(s) is (are) not bound to any atoms, bonds, or molecules rather than they are localized into the space, crystal voids, or interlayer between two molecular slabs. There are three major categories of electrides, known as organic electriades, inorganic electrides, and molecular electrides. The computational techniques have proven as a great tool to provide emphasis on the electride materials. In this review, we have focused on the computational methodologies and criteria that help to characterize molecular electrides. A detailed account of the computational methods and basis sets applicable for molecular electrides have been discussed along with their limitation(s) in this field. The main criterion for the identification of the electrides has also been discussed thoroughly with proper examples. The molecular electrides presented here have been justified with all the required criteria that support and proved their electride characteristics. We have also presented a few systems which have similar properties but are not considered as molecular electrides. Moreover, the applicability of the electrides in catalytic processes has also been presented.

Computational mining of endohedral C70 electrides: tri-metal alkali and alkaline-earth encapsulation

Based on the atoms in molecules analysis, electron localization functions, and nonlinear optical property analysis, M3@C70 (M = Li, Be, Mg, Ca) fullerenes are identified as electrides.

Substituent Effects on Electride Characteristics of Mg2(η5-C5H5)2: A Theoretical Study

An ab initio study has been carried out on the substituted binuclear sandwich complexes of Mg₂(η⁵-C₅H₅)₂. We have checked whether the substitution destroys the electride properties of a complex, as it needs to satisfy several stringent criteria to obtain the status of an electride. The thermochemical results show that the complexes are stable at room temperature and 1 atm pressure. From the analysis of the various electron density descriptors and the natural bond orbital (NBO) for all the complexes, it is confirmed that the Mg-Mg bonds are covalent and the metal-ligand bonds are ionic in nature. The charges on each Mg atom in the studied complexes are +1. Analysis of the electron density descriptors shows the presence of a non-nuclear attractor (NNA) at the middle of the bond formed by the two Mg atoms when attached to the ligands. The electride characteristics are exhibited by all of the designed complexes. We also report the aromaticity behavior and reactivity descriptors of these complexes. The electride characteristics of Mg₂(η⁵-C₅H₅)₂ complex get affected on substitution, as both the NNA population and the nonlinear optical properties (NLO) of the complexes are changed.

How Many Electrons Does a Molecular Electride Hold?

Electrides are very peculiar ionic compounds where electrons occupy the anionic positions. In a crystal lattice, these isolated electrons often form channels or surfaces, furnishing electrides with many traits with promising technological applications. Despite their huge potential, thus far, only a few stable electrides have been produced because of the intricate synthesis they entail. Due to the difficulty in assessing the presence of isolated electrons, the characterization of electrides also poses some serious challenges. In fact, their properties are expected to depend on the arrangement of these electrons in the molecule. Among the criteria that we can use to characterize electrides, the presence of a non-nuclear attractor (NNA) of the electron density is both the rarest and the most salient feature. Therefore, a correct description of the NNA is crucial to determine the properties of electrides. In this paper, we analyze the NNA and the surrounding region of nine molecular electrides to determine the number of isolated electrons held in the electride. We have seen that the correct description of a molecular electride hinges on the electronic structure method employed for the analyses. In particular, one should employ a basis set with sufficient flexibility to describe the region close to the NNA and a density functional approximation that does not suffer from large delocalization errors. Finally, we have classified these nine molecular electrides according to the most likely number of electrons that we can find in the NNA. We believe this classification highlights the strength of the electride character and will prove useful in designing new electrides.

Electride Characteristics of Some Binuclear Sandwich Complexes of Alkaline Earth Metals, M2(η5-L)2 (M = Be, Mg; L = C5H5-, N5-, P5-, As5-)

Ab initio calculations have been performed for a series of binuclear sandwich complexes, M₂(η⁵-L)₂. It has been observed that the eclipsed and staggered conformations have almost equal amount of energies. The M-M bond lengths are comparable with those in the free M₂ molecules (M = Be, Mg). The nuclear-independent chemical shift (NICS) values indicate the aromaticity of these complexes. The stability of Be₂(η⁵-L)₂ complexes is higher than that of the Mg₂(η⁵-L)₂ complexes. The natural bond orbital (NBO) analysis and electron density descriptors proved the existence of a single covalent M-M bond in an M₂²⁺ fragment. It has been observed that each M-M bond contains a non-nuclear attractor (NNA) at the center of the respective bond. The Laplacian of electron density [∇²ρ(r)] is negative at the NNAs. The energy decomposition analysis (EDA) showed that M₂²⁺ and 2L^- represent the bonding interaction in the complexes. All of the designed binuclear sandwich complexes behave as electrides.

Cavity-trapped electrons: lithium doped tetracyano-2,6-naphthoquinodimethane (TNAP) systems

The interesting features in the lithium based electride motived us to explore new species with electride properties. To achieve this goal, the tetracyano-2,6-naphthoquinodimethane (TNAP) species has been used as backbone to investigate systematic addition of lithium atoms to the TNAP backbone (Li_n@TNAP (n = 1-4) species) through density functional theory (DFT) simulation. After finding the most stable geometries for each Li_n@TNAP (n = 1-4) species by full optimization process, we show their electronic-structural features in this work. In the next step, the properties of electron-density-laplacian (∇²ρ(r)), non-linear-optical (NLO), non-nuclear-attractor (NNA), and electron-localization-function (ELF) have been studied to incorporate the reported Li_n@TNAP (n = 1-4) species in two different categories, salt or electride. The obtained outcomes present that the Li₁@TNAP and the Li₂@TNAP molecules are the lithium-salt. In contrast, the Li₃@TNAP and the Li₄@TNAP molecules are lithium-based electrides along with the isolated electrons in the molecular structure.

Activation of Small Molecules (H2, CO2, N2O, CH4, and C6H6) by a Porphyrinoid-Based Dimagnesium(I) Complex, an Electride

A density functional theory-based computation has been carried out to reveal the geometrical and electronic structures of Mg₂EP (1), where EP is an extended (3.1.3.1) porphyrinoid system. EP is a 22 π electronic system and is aromatic in nature. Here, we have studied the thermodynamic and kinetic stabilities of EP^2--supported Mg₂ ²⁺ ion. The nature of bonding has been studied using natural bond orbital and atoms in molecule schemes. The presence of a covalent Mg(I)-Mg(I) σ-bond in Mg₂EP is confirmed. The occurrence of a non-nuclear attractor (NNA) with large electron population, negative Laplacian of electron density at NNA, and presence of an electron localization function basin along with large nonlinear optical properties prompt us to classify Mg₂EP as the first porphyrinoid-based organic electride. Further five small molecules, viz., dihydrogen (H₂), carbon dioxide (CO₂), nitrous oxide (N₂O), methane (CH₄), and benzene (C₆H₆), are found to be activated by the electron density between the two Mg atoms in Mg₂EP.

Spin-paired solvated electron couples in alkali–ammonia systems

Diamagnetism, color of and hydrogen evolution from not too diluted solvated electrons in alkali–ammonia systems are explained with ammoniated electron lone pairs.

Role of Excess Electrons in Nonlinear Optical Response

The excess electron is a kind of special anion with dispersivity, loosely bounding and with other fascinating features, which plays a pivotal role (promote to about 10(6) times in (H2O)3{e}) in the large first hyperpolarizabilities (β0) of dipole-bound electron clusters. This discovery opens a new perspective on the design of novel nonlinear optical (NLO) molecular materials for electro-optic device application. Significantly, doping alkali metal atoms in suitable complexants was proposed as an effective approach to obtain electride and alkalide molecules with excess electron and large NLO responses. The first hyperpolarizability is related to the characteristics of complexants and the excess electron binding states. Subsequently, a series of new strategies for enhancing NLO response and electronic stability of electride and alkalide molecules are exhibited by using various complexants. These strategies include not only the behaviors of pushed and pulled electron, size, shape, and number of coordination sites of complexants but also the number and spin state of excess electrons in these unusual NLO molecules.

On the existence and characterization of molecular electrides

Molecular electrides exist and can be designed using some guidelines and a set of computational criteria.

A new strategy for simultaneously enhancing nonlinear optical response and electron stability in novel cup–saucer+–cage−-shaped sandwich electride molecules with an excess electron protected inside the cage

A new strategy of utilizing the cage size effect for simultaneously enhancing the β₀ and the VIP.

Influence of spiral framework on nonlinear optical materials

A series of spiral donor-π-acceptor frameworks (i.e. 2-2, 3-3, 4-4, and 5-5) based on 4-nitrophenyldiphenylamine with π-conjugated linear acenes (naphthalenes, anthracenes, tetracenes, and pentacenes) serving as the electron donor and nitro (NO2 ) groups serving as the electron acceptor were designed to investigate the relationships between the nonlinear optical (NLO) responses and the spirality in the frameworks. A parameter denoted as D was defined to describe the extent of the spiral framework. The D value reached its maximum if the number of NO2 groups was equal to the number of fused benzene rings contained in the linear acene. A longer 4-nitrophenyldiphenylamine chain led to a larger D value and, further, to a larger first hyperpolarizability. Different from traditional NLO materials with charge transfer occurring in the one-dimensional direction, charge transfer in 2-2, 3-3, 4-4, and 5-5 occur in three-dimensional directions due to the attractive spiral frameworks, and this is of great importance in the design of NLO materials. The origin of such an enhancement in the NLO properties of these spiral frameworks was explained with the aid of molecular orbital analysis.

Effects of microhydration on the electronic properties of ortho-aminobenzoic acid

High-level density functional electronic structure calculations have been performed to analyze the effect of microsolvation with water on the electronic properties of ortho-aminobenzoic acid (o-Abz). The hydrogen-bonded interaction of the o-Abz molecule with one to three water molecules, o-Abz···(H2O)n (n = 1–3), has been considered in two different situations, once the solvent water molecules are placed close to the carboxyl (−COOH) group of o-Abz producing the o-Abz···[H2O]nCOOH complexes and when the water molecules are placed close to the amino (−NH2) group producing the o-Abz···[H2O]nNH2 clusters. Variation of the vibrational spectra and energetics upon hydrogen-bond formation are analyzed and compared with available experimental data. The effect of cooperativity is also analyzed. Overall, the hydrogen-bonded o-Abz···[H2O]nCOOH clusters are found to be more stable than the o-Abz···[H2O]nNH2 clusters.

New acceptor-bridge-donor strategy for enhancing NLO response with long-range excess electron transfer from the NH2...M/M3O donor (M = Li, Na, K) to inside the electron hole cage C20F19 acceptor through the unusual σ chain bridge (CH2)4

Using the strong electron hole cage C20F19 acceptor, the NH2...M/M3O (M = Li, Na, and K) complicated donors with excess electron, and the unusual σ chain (CH2)4 bridge, we construct a new kind of electride molecular salt e(-)@C20F19-(CH2)4-NH2...M(+)/M3O(+) (M = Li, Na, and K) with excess electron anion inside the hole cage (to be encapsulated excess electron-hole pair) serving as a new A-B-D strategy for enhancing nonlinear optical (NLO) response. An interesting push-pull mechanism of excess electron generation and its long-range transfer is exhibited. The excess electron is pushed out from the (super)alkali atom M/M3O by the lone pair of NH2 in the donor and further pulled inside the hole cage C20F19 acceptor through the efficient long σ chain (CH2)4 bridge. Owing to the long-range electron transfer, the new designed electride molecular salts with the excess electron-hole pair exhibit large NLO response. For the e(-)@C20F19-(CH2)4-NH2...Na(+), its large first hyperpolarizability (β0) reaches up to 9.5 × 10(6) au, which is about 2.4 × 10(4) times the 400 au for the relative e(-)@C20F20...Na(+) without the extended chain (CH2)4-NH2. It is shown that the new strategy is considerably efficient in enhancing the NLO response for the salts. In addition, the effects of different bridges and alkali atomic number on β0 are also exhibited. Further, three modulating factors are found for enhancing NLO response. They are the σ chain bridge, bridge-end group with lone pair, and (super)alkali atom. The new knowledge may be significant for designing new NLO materials and electronic devices with electrons inside the cages. They may also be the basis of establishing potential organic chemistry with electron-hole pair.