Thermal degradation observed with different injection techniques: Quantitative estimation by the use of thermolabile carbamate pesticides

Efficacy of Actellic 300 CS-based indoor residual spraying on key entomological indicators of malaria transmission in Alibori and Donga, two regions of northern Benin

Background

The current study shows the results of three years of IRS entomological monitoring (2016, before intervention; 2017 and 2018, after intervention) performed in Alibori and Donga, northern Benin.

Methods

Mosquito collections were performed on a monthly basis using human landing catches and pyrethrum spray catches in six districts including four treated with Actellic 300 CS (Kandi, Gogounou, Djougou and Copargo) and two untreated (Bembèrèkè and Kouandé) which served as control sites. Key transmission indicators of Anopheles gambiae (s.l.) as well as the residual activity of Actellic 300 CS assessed through WHO cone tests, were determined.

Results

The residual efficacy duration of Actellic 300 CS after the two IRS campaigns (2017 and 2018) was 4–5 months (May–September). The parity rate and the sporozoite index of An. gambiae (s.l.) were 36.62% and 0.71%, respectively, after the first spray round in treated areas compared to 57.24% and 3.7%, respectively, in the control areas (P < 0.0001). The same trend was observed after the second spray round. After the first spray round, each person received 1.6 infective bites/month (ib/m) in the treated areas against 12.11 ib/m in the control areas, resulting in a reduction rate of 86.78%. Similarly, the entomological inoculation rate was 1.5 ib/m after the second spray round in the treated areas vs 9.75 ib/m in the control areas, corresponding to a reduction of 84.61%. A decrease in the parity rate (46.26%), sporozoite index (85.75%) and EIR (87.27%) was observed for An. gambiae (s.l.) after the first round of IRS (June–October 2017) compared to the pre-intervention period (June–October 2016). The density of An. gambiae (s.l.) ranged between 0.38–0.48 per house in treated areas vs 1.53–1.76 An. gambiae (s.l.) per house respectively after the first and second IRS rounds.

Conclusions

This study showed the positive impact of IRS in reducing key entomological parameters of malaria transmission in Alibori and Donga. However, the considerable blood-feeding rate of An. gambiae (s.l.) in spray areas, stress the need for the population to sleep under long-lasting insecticidal nets (LLINs) in addition, to prevent from mosquito bites which did not succeed in resting on sprayed walls.

Basic Overview on Gas Chromatography Injectors

The main purpose of this chapter is to give a basic overview on instrumentation as well as the basics of gas chromatography ( GC ) injectors, and it is mainly devoted to students and beginners in the field of GC .

Degradation of insecticides used for indoor spraying in malaria control and possible solutions

BACKGROUND

The insecticide dichloro-diphenyl-trichloroethane (DDT) is widely used in indoor residual spraying (IRS) for malaria control owing to its longer residual efficacy in the field compared to other World Health Organization (WHO) alternatives. Suitable stabilization to render these alternative insecticides longer lasting could provide a less controversial and more acceptable and effective alternative insecticide formulations than DDT.

METHODS

This study sought to investigate the reasons behind the often reported longer lasting behaviour of DDT by exposing all the WHO approved insecticides to high temperature, high humidity and ultra-violet light. Interactions between the insecticides and some mineral powders in the presence of an aqueous medium were also tested. Simple insecticidal paints were made using slurries of these mineral powders whilst some insecticides were dispersed into a conventional acrylic paint binder. These formulations were then spray painted on neat and manure coated mud plaques, representative of the material typically used in rural mud houses, at twice the upper limit of the WHO recommended dosage range. DDT was applied directly onto mud plaques at four times the WHO recommended concentration and on manure plaques at twice WHO recommended concentration. All plaques were subjected to accelerated ageing conditions of 40°C and a relative humidity of 90%.

RESULTS

The pyrethroids insecticides outperformed the carbamates and DDT in the accelerated ageing tests. Thus UV exposure, high temperature oxidation and high humidity per se were ruled out as the main causes of failure of the alternative insecticides. Gas chromatography (GC) spectrograms showed that phosphogypsum stabilised the insecticides the most against alkaline degradation (i.e., hydrolysis). Bioassay testing showed that the period of efficacy of some of these formulations was comparable to that of DDT when sprayed on mud surfaces or cattle manure coated surfaces.

CONCLUSIONS

Bioassay experiments indicated that incorporating insecticides into a conventional paint binder or adsorbing them onto phosphogypsum can provide for extended effective life spans that compare favourably with DDT's performance under accelerated ageing conditions. Best results were obtained with propoxur in standard acrylic emulsion paint. Similarly, insecticides adsorbed on phosphogypsum and sprayed on cattle manure coated surfaces provided superior lifespans compared with DDT sprayed directly on a similar surface.

Multiresidue determination of thermolabile insecticides in cereal products by gas chromatography-mass spectrometry: Evaluation with on-column injection and conventional hot splitless injection

This communication presents a study on the simultaneous determination of thermolabile N-methylcarbamate and organophosphorus insecticides in cereal products by gas chromatography-mass spectrometry. The thermal stability of the multiple insecticides was evaluated with conventional hot splitless injection and on-column injection. The results obtained by GC-MS with these two injection techniques were compared in terms of the recovery, the limit of detection, the limit of qualification, and the reproducibility. With on-column injection, the pesticide recoveries in cereal samples were better than 82%, with relative standard deviations lower than 5.4%. The limits of qualification for most insecticides were in the range of 0.009-0.08 mg/kg, i. e. lower than the maximum residue limits established for insecticides in cereal products by the European Union. The long-term stability using on-column injection for analysis of insecticides in real samples was evaluated and normal chromatographic performance could be obtained within 50 analyses. The results revealed that it was possible for application of on-column injection in the analysis of thermolabile multiple insecticides in food sample after comprehensive sample clean-up, despite the highly contaminated nature of the column system.

Application of a Novel Large-Volume Injection Method Using a Stomach-Shaped Inlet Liner in Capillary Gas Chromatographic Trace Analysis of Dioxins in Human Milk and Plasma

A newly developed large-volume injection (LVI) technique that employs a unique stomach-shaped inlet liner (SSIL) inside of a programmable temperature vaporizer was used for the determination of trace amounts of dioxins in human milk and plasma. The initial temperature and the initial dwelling time of the inlet and the kind of solvent used were found to be critical in determining the analytical sensitivity of dioxins due to the loss of these relatively volatile compounds during solvent vaporization. Human milk and plasma were purified and fractionated by pre-packed multi-layered silica-gel chromatography and activated carbon silica-gel column chromatography. A 20-microL aliquot of the fraction collected from the chromatography with toluene was directly applied to the LVI system in high-resolution gas chromatography/high-resolution mass spectrometry. Excellent correlation (r > 0.97) between the values obtained by the LVI method using the SSIL device and those by the conventional regular-volume splitless injection method was obtained for PCDDs, PCDFs and non-ortho PCBs in human milk and plasma samples.

Large volume splitless injection with concurrent solvent recondensation: Keeping the sample in place in the hot vaporizing chamber

An injector liner packed with a plug of glass wool is compared with a laminar and a mini laminar liner for large volume (20-50 microL) splitless injection with concurrent solvent recondensation (CSR-LV splitless injection). Videos from experiments with perylene solutions injected into imitation injectors show that glass wool perfectly arrested the sample liquid and kept it in place until the solvent had evaporated. The sample must be transferred from the needle to the glass wool as a band, avoiding 'thermospraying' by partial solvent evaporation inside the needle. The liquid contacted the liner wall when the band was directed towards it, but from there it was largely diverted to the glass wool. In the laminar liners, part of the liquid remained and evaporated at the entrance of the obstacle, while the other proceeded to the center cavity. Vapors formed in the center cavity drove liquid from the entrance of the obstacle upwards, but the importance of such problems could not be verified in the real injector. Some liquid split into small droplets broke through the obstacle and entered the column. Breakthrough through the laminar liners was confirmed by a chromatographic experiment. An improved design of a laminar liner for large volume injection is discussed as a promising alternative if glass wool causes problems originating from insufficient inertness.

AT-column, a novel concentrating technique for large-volume injections in gas chromatography

Nowadays, large-volume injection is widely used for the GC determination of trace analytes, specifically to improve detectability. The most popular injectors for large-volume injections are the programmable temperature vaporisation (PTV) injector and the cold on-column (COC) injector, where each device has its own advantages and limitations. The novel AT-column concentrating technique combines features of two other injection techniques, loop-type large-volume and vapour overflow. AT-column injection is based on solvent evaporation in an empty liner with solvent vapour discharge via the split line. Little or no optimisation is required. The only relevant parameter is the injection temperature which can easily be calculated using the equation of Antoine. As an application, AT-column injection is combined with GC-MS for the trace-level determination of labile analytes and with GC-flame ionisation detection for the analysis of high molecular weight polymer additives. In summary, AT-column is an injection technique that combines the inertness of the COC, and the flexibility and robustness of the PTV large-volume technique.

Matrix effects in (ultra)trace analysis of pesticide residues in food and biotic matrices

If one has to determine multiple residues of modem pesticides and/or other groups of (semi)polar and/or thermally unstable contaminants with a wide range of physico-chemical properties within a single analytical run, it can be complicated to obtain low limits of quantitation (LOQ), good precision as well as relevant trueness of results for all the target analytes. Matrix components, which are unavoidably present in analyzed samples (even after the thorough clean-up step), may be responsible for miscellaneous adverse affects impairing different stages of the GC and/or LC determinative step. In this review, the nature of various types of matrix effects are discussed together with suggestions for prevention, reduction and/or compensation of their occurrence when determining troublesome analytes in foods and other complex biotic matrices.

Performance of programmed temperature vaporizer, pulsed splitless and on-column injection techniques in analysis of pesticide residues in plant matrices

A programmed temperature vaporizer (PTV) injection technique has been recently implemented in our laboratory. In present paper its performance is compared with other GC injection techniques commonly used in trace analysis of organic contaminants. Twenty-six pesticides representing different chemical classes were selected for the study. This group comprised compounds typically subjected to discrimination in the injection port of the gas chromatograph, e.g., polar organophosphorus pesticides and thermolabile carbamates. In the first set of experiments standards in pure solvent were injected into GC systems employing different types of injection, i.e., (i) on-column, (ii) pulsed splitless, (iii) PTV solvent split, (iv) PTV splitless, and the responses of analytes were compared. Discrimination of troublesome compounds was significantly decreased with the application of PTV solvent split injection. In the second set of experiments repetitive injections of purified wheat samples were performed, with aims to evaluate the long-term stability of responses, as well as matrix effects in different stages of system contamination for each injection technique. The tolerance of the GC system to co-injected matrix components was increased in the order: on-column<pulsed splitless<PTV solvent split technique. As regards matrix effects, these were suppressed considerably with the PTV solvent split technique in comparison with pulsed splitless injection. With the latter technique after 66 injections of wheat samples relative responses (apparent recovery) reached as much as 450% for some compounds, while with the application of PTV matrix effects did not exceed 200% under the same conditions.

On-line coupling of solid-phase extraction to gas chromatography with fast solvent vaporization and concentration in an open injector liner. Analysis of pesticides in aqueous samples

The purpose of this study is to combine solid-phase extraction (SPE) with gas chromatography (GC) for the fully automated determination of pesticides and herbicides in aqueous samples. The interface technique employed for connecting SPE with GC was fast solvent vaporization and concentration in an open injector liner. The interface device consisted of the programmed-temperature vaporizing injector without using the packing material in the liner and the target compounds were concentrated around the inlet of the GC capillary column. This avoided the degradation of target compounds, and no precise control of the injecting speed was required, when an automatic SPE system was connected to GC-MS. The aqueous samples used in this system were prepared by spiking 29 kinds of pesticide and herbicide compounds, which are regulated by the Ministry of Health and Welfare of the Japanese National government, in purified water and river water, to a resulting concentration of 1 microg/l. Employing this system, the recoveries and RSDs (n=6) of most compounds were greater than 75% and within 10%, respectively. From the results of this study, we found that on-line automatic SPE and capillary GC-MS equipped with the fast solvent vaporizing and concentrating method in an open injector liner could be connected in order to obtain good results for the determination of pesticides in water samples.

Programmed temperature vaporiser-based injection in capillary gas chromatography

The application of programmed temperature vaporisation (PTV) in capillary gas chromatographic analysis is reviewed. The development of the different strategies as well as the state of the art are described. As the analytes are normally enriched in the PTV insert, the quoted papers are subdivided depending on whether the enrichment was carried out from organic solvents, from water or from gaseous media. Furthermore, the possibilities of PTVs for on-line coupling with sample preparation methods or other separation techniques and their use as thermoreactors are mentioned.

Evaluation of different injection techniques in the gas chromatographic determination of thermolabile trace impurities in a drug substance

Thermodegradation of labile compounds in the hot injection port of a gas chromatograph causes many problems and can lead to ambiguous, poorly reproducible results. Splitless injection used in trace analysis in order to achieve a lower detection limit may even enhance the difficulties due to the longer residence time of the volatized sample in the injection port. Different techniques were tested to avoid thermodegradation of an epoxide and its corresponding chlorohydrin in a drug substance: variation of the injector temperature, high inlet flow rate during injection by electronic pressure programming, and cool on-column injection. The results showed that on-column injection was superior to splitless injection. The chlorohydrin formed epoxide by release of HCl upon splitless injection. A more detailed investigation of the factors that affect epoxide formation indicates that active sites within the injector are responsible for the degradation and that the reaction is temperature dependent. However, results equivalent to those obtained by on-column injection were obtained for splitless injection when inert materials were used in the injector.

Ion formation of N-Methyl carbamate pesticides in thermospray mass spectrometry: The effects of additives to the liquid chromatographic eluent and of the vaporizer temperature

The effects of three additives-ammonium acetate, ammonium formate, and nicotinic acid-to the liquid chromatographic (LC) eluent and of the vaporizer temperature on the ion formation of N-methyl carbamate pesticides in thermospray (TSP) mass spectrometry was investigated by using filament- or discharge-assisted ionization. Nineteen carbamates and 12 of their known environmental degradation products were used as model compounds. The additives cause a strong reduction in the abundance of the characteristic fragment ions [M + H - CH3NCO](+) and [M - H - CH3NCO](-) for some of the carbamates. The addition of nicotinic acid reduces the quasimolecular ion intensity and, in most cases, produces nicotinic acid adduct ions. The addition of ammonium acetate or ammonium formate increases the intensity of the quasimolecular ion and in most cases produces a base peak for the ammonium adduct ion. The combination of a suppression of fragmentation and an enhancement of quasimolecular ion formation produces an overall gain in sensitivity. As to more specific effects, the addition of the ammonium salts reduces the intensity of M(-•) with the chlorinated carbamate barban and suppresses the formation of "odd" adduct ions in the TSP mass spectra of most other carbamates. Monitoring the intensity of the fragment and the quasimolecular ion signal as a function of the probe stem temperature, and the related probe tip temperature, proved to be an easy method to study the thermal degradation of the carbamates. This monitoring procedure showed that methiocarb and its sulfone already suffer from thermal degradation at a stem temperature of 90°C and that these compounds will therefore present problems in quantitation with LC/TSP mass spectrometry.