A semi-quantitative approach for the rapid screening and mass profiling of naphthenic acids directly in contaminated aqueous samples

Evaluations of Weathering of Polar and Nonpolar Petroleum Components in a Simulated Freshwater-Oil Spill by Orbitrap and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

The comprehensive chemical characterization of crude oil is important for the evaluation of the transformation and fate of components in the environment. Molecular-level speciation of naphthenic acid fraction compounds (NAFCs) was investigated in a mesoscale spill tank using both negative-ion electrospray ionization (ESI) Orbitrap mass spectrometry (MS) and positive-ion atmospheric pressure photoionization Fourier transform ion cyclotron resonance mass spectrometry (APPI-FT-ICR-MS). Both ionization techniques are coupled to high-resolution mass spectrometric detectors (ESI: Orbitrap MS; APPI: FT-ICR-MS at 9.4 T), enabling insight into the behavior and fate of petrogenic compounds during a simulated freshwater crude oil spill. Negative-ion ESI Orbitrap-MS reveals that oxygen-containing (Ox) classes are detected early in the spill, whereby species with more oxygen per molecule evolve later in the simulated spill. The O2-containing species gradually decreased in relative abundance, while O3 and O4 species increased in relative abundance throughout the simulated spill, which could correspond to a relative degree of oxygen incorporation. Nonpolar speciation by positive-ion APPI 9.4 T FT-ICR-MS allowed for the identification of water-soluble nonpolar and less polar acidic species. Molecular-level graphical representation of elemental compositions derived from simulated spill water-soluble and oil-soluble species suggest that biological activity is the primary degradation mechanism and that biodegradation was the dominant mechanism based on the negative-ion ESI Orbitrap-MS results.

Evaluating the attenuation of naphthenic acids in constructed wetland mesocosms planted with Carex aquatilis

Surface oil sands mining and extraction in northern Alberta's Athabasca oil sands region produce large volumes of oil sands process-affected water (OSPW). OSPW is a complex mixture containing major contaminant classes including trace metals, polycyclic aromatic hydrocarbons, and naphthenic acid fraction compounds (NAFCs). Naphthenic acids (NAs) are the primary organic toxicants in OSPW, and reducing their concentrations is a priority for oil sands companies. Previous evidence has shown that constructed wetland treatment systems (CWTSs) are capable of reducing the concentration of NAs and the toxicity of OSPW through bioremediation. In this study, we constructed greenhouse mesocosms with OSPW or lab process water (LPW) (i.e., water designed to mimic OSPW minus the NAFC content) with three treatments: (1) OSPW planted with Carex aquatilis; (2) OSPW, no plants; and (3) LPW, no plants. The OSPW-C. aquatilis treatment saw a significant reduction in NAFC concentrations in comparison to OSPW, no plant treatments, but both changed the distribution of the NAFCs in similar ways. Upon completion of the study, treatments with OSPW saw fewer high-molecular-weight NAs and an increase in the abundance of O3- and O4-containing formulae. Results from this study provide invaluable information on how constructed wetlands can be used in future remediation of OSPW in a way that previous studies were unable to achieve due to uncontrollable environmental factors in field experiments and the active, high-energy processes used in CWTSs pilot studies.

Online Membrane Sampling for the Mass Spectrometric Analysis of Oil Sands Process Affected Water-Derived Naphthenic Acids in Real-World Samples

Large volumes of oil sands process-affected waters (OSPW) result from heavy oil extraction in Alberta, Canada. Currently, a toxic legacy of ca. 500 Mm3 is stored in tailings ponds under a zero-discharge policy. OSPW is a complex mixture of suspended and dissolved materials including a wide range of inorganic and organic contaminants. Classically defined naphthenic acids (NAs; CnH2n+ZO2) are one of the primary toxic fractions in OSPW and have therefore been the subject of considerable research interest. Most studies employ considerable sample cleanup followed by liquid chromatography and/or high-resolution mass spectrometry (HRMS) for the characterization of these complex mixtures. However, these strategies can be time- and cost-intensive, limiting the scope of research and adoption for regulatory purposes. Condensed phase membrane introduction mass spectrometry (CP-MIMS) is emerging as a “fit-for-purpose” approach for the analysis of NAs. This technique directly interfaces the mass spectrometer with an aqueous sample using a hydrophobic semi-permeable membrane, requiring only pH adjustment to convert NAs to a membrane-permeable form. Here, we examine the perm-selectivity of classical NAs (O2) relative to their more oxidized counterparts (O3–O7) and heteroatomic (N, S) species collectively termed naphthenic acid fraction compounds (NAFCs). The investigation of 14 model compounds revealed that classically defined NAs are greater than 50-fold more membrane permeable than their oxidized/heteroatomic analogs. HRMS analysis of real OSPW extracts with and without membrane clean-up further supported selectivity towards the toxic O2 class of NAs, with >85% of the overall signal intensity attributable to O2 NAs in the membrane permeate despite as little as 34.7 ± 0.6% O2 NAs observed in the directly infused mixture. The information collected with HRMS is leveraged to refine our method for analysis of NAs at unit mass resolution. This new method is applied to 28 archived real-world samples containing NAs/NAFCs from constructed wetlands, OSPW, and environmental monitoring campaigns. Concentrations ranged from 0–25 mg/L O2 NAs and the results measured by CP-MIMS (unit mass) and SPE-HRMS (Orbitrap) showed good agreement (slope = 0.80; R2 = 0.76).

Condensed Phase Membrane Introduction Mass Spectrometry: A Direct Alternative to Fully Exploit the Mass Spectrometry Potential in Environmental Sample Analysis

Membrane introduction mass spectrometry (MIMS) is a direct mass spectrometry technique used to monitor online chemical systems or quickly quantify trace levels of different groups of compounds in complex matrices without extensive sample preparation steps and chromatographic separation. MIMS utilizes a thin, semi-permeable, and selective membrane that directly connects the sample and the mass spectrometer. The analytes in the sample are pre-concentrated by the membrane depending on their physicochemical properties and directly transferred, using different acceptor phases (gas, liquid or vacuum) to the mass spectrometer. Condensed phase (CP) MIMS use a liquid as a medium, extending the range to new applications to less-volatile compounds that are challenging or unsuitable to gas-phase MIMS. It directly allows the rapid quantification of selected compounds in complex matrices, the online monitoring of chemical reactions (in real-time), as well as in situ measurements. CP-MIMS has expanded beyond the measurement of several organic compounds because of the use of different types of liquid acceptor phases, geometries, dimensions, and mass spectrometers. This review surveys advancements of CP-MIMS and its applications to several molecules and matrices over the past 15 years.

Fractionation and characterization of dissolved organic matter using solid-phase extraction followed by Fourier transform ion cyclotron resonance mass spectrometry with electrospray, atmospheric pressure photoionization, and laser desorption ionization

RATIONALE

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) combined with different ionization techniques provides a powerful means to characterize dissolved organic matter (DOM) at the molecular level. Solid-phase extraction (SPE) is currently the most widely utilized method for extracting the DOM, but one-step elution using methanol does not provide a comprehensive picture of DOM. The development of efficient extraction and enrichment methods as well as characterization techniques from water samples remains a priority for DOM research, which is investigated in this study.

METHODS

The DOM was extracted from lake water by SPE using one-step elution (methanol or dichloromethane) and multistep elution (water, methanol, acetone, and dichloromethane). A combination of electrospray ionization (ESI), atmospheric pressure photoionization (APPI), and matrix-free laser desorption ionization (LDI) was utilized for FT-ICR MS analysis in both positive (+) and negative (-) ion modes.

RESULTS

The total recovery of the multistep elution was 23.5% higher as compared to the investigated one-step elution procedure (85% vs. 61.6%); however, a comparison of the observed molecular species and the range of diversity under different ionization techniques along with the statistical analyses showed that proper selection of solvent and ionization method was required to explore specific compounds from the sample.

CONCLUSIONS

For DOM species containing different heteroatoms, a combination of ESI, APPI, and LDI can offer a comprehensive profile of DOM in aquatic ecosystems. The specific molecular formulae of each ionization technique are characterized as follows: ESI- mode exhibited strong selectivity for lignin-like and tannins-like species with high oxygen content, as well as organosulfates. ESI+ favored lipid species and peptide/protein compounds. Unsaturated and condensed aromatic hydrocarbons with low oxygen were preferably ionized by both APPI and LDI.

Aqueous naphthenic acids and polycyclic aromatic hydrocarbons in a meso-scale spill tank affected by diluted bitumen analyzed directly by membrane introduction mass spectrometry

With the increasing use of unconventional, heavy crude oils there is growing interest in potential impacts of a diluted bitumen (DB) spill in marine and freshwater environments. DB has the potential to release several toxic, trace organic contaminants to the water column. Here, the aqueous concentrations and compositions of two classes of organic contaminants, naphthenic acids (NAs) and polycyclic aromatic hydrocarbons (PAHs), are followed over 8 weeks after a simulated spill of DB (10 L) into a freshwater mesocosm (1200 L) with river sediment (2.4 kg). These complex samples contain biogenic dissolved organic matter, inorganic ions, petroleum contaminants, suspended sediments, and oil droplets. We report the first use of condensed phase membrane introduction mass spectrometry (CP-MIMS) as a direct sampling platform in a complex multi-phase mesocosm spill tank study to measure trace aqueous phase contaminants with little to no sample preparation (dilution and/or pH adjustment). CP-MIMS provides complementary strengths to conventional analytical approaches (e.g., gas- or liquid chromatography mass spectrometry) by allowing the entire sample series to be screened quickly. Trace NAs are measured as carboxylates ([M-H]^-) using electrospray ionization and PAHs are detected as radical cations (M^+•) using liquid electron ionization coupled to a triple quadrupole mass spectrometer. The DB-affected mesocosm exhibits NA concentrations from 0.3 to 1.2 mg/L, which rise quickly over the first 2 - 5 days , then decrease slowly over the remainder of the study period. The NA profile (measured as the full scan in negative-electrospray ionization at nominal mass resolution) shifts to lower m/z with weathering, a process followed by principal component analysis of the normalized mass spectra. We couple CP-MIMS with high-resolution mass spectrometry to follow changes in molecular speciation over time, which reveals a concomitant shift from classical 'O₂' naphthenic acids to more oxidized analogues. Concentrations of PAHs and alkylated analogues (C1 - C4) in the DB-affected water range from 0 to 5 μg/L. Changes in PAH concentrations depend on ring number and degree of alkylation, with small and/or lightly alkylated (C0 - C2) PAH concentrations rising to a maximum in the first 4 - 8 days (100 - 200 h) before slowly decaying over the remainder of the study period. Larger and heavily alkylated (C3 - C4) PAH concentrations generally rise slower, with some species remaining below the detection limit throughout the study period (e.g., C₂₀H₁₂ class including benzo[a]pyrene). In contrast, a control mesocosm (without oil) exhibited NA concentrations below 0.05 mg/L and PAHs were below detection limit. Capitalizing on the rapid analytical workflow of CP-MIMS, we also investigate the impacts of sample filtration at the time of sampling (on NA and PAH data) and sample storage time (on NA data only).

Membrane Sampling Separates Naphthenic Acids from Biogenic Dissolved Organic Matter for Direct Analysis by Mass Spectrometry

Oil sands process waters can release toxic naphthenic acids (NAs) into aquatic environments. Analytical techniques for NAs are challenged by sample complexity and interference from naturally occurring dissolved organic matter (DOM). Herein, we report the use of a poly(dimethylsiloxane) (PDMS) polymer membrane for the on-line separation of NAs from DOM and use direct infusion electrospray ionization mass spectrometry to yield meaningful qualitative and quantitative information with minimal sample cleanup. We compare the composition of membrane-permeable species from natural waters fortified with a commercial NA mixture to those derived from weak anion exchange solid-phase extraction (SPE) using high-resolution mass spectrometry. The results show that SPE retains a wide range of carboxylic acids, including biogenic DOM, while permeation through PDMS was selective for petrogenic classically defined NAs (C_nH_2n+zO₂). A series of model compounds (log K_ow ∼1-7) were used to characterize the perm-selectivity and reveal the separation is based on hydrophobicity. This convenient sample cleanup method is selective for the O₂ class of NAs and can be used prior to conventional analysis or as an on-line analytical strategy when coupled directly to mass spectrometry.

Transformation of bitumen-derived naphthenic acid fraction compounds across surface waters of wetlands in the Athabasca Oil Sands region

Bitumen is extracted from oil sands in the Athabasca Oil Sands region (AOSR) of Alberta, Canada. Much of the bitumen-derived toxicity in mine waste is attributable to naphthenic acid fraction compounds (NAFCs). Mines in the AOSR are required to be returned to a natural state after closure; thus, cost-effective strategies are needed to reduce toxicity from NAFCs. Previous studies have demonstrated the capability of constructed wetlands to attenuate NAFCs. However, the capacity of wetlands in the natural environment to degrade and transform NAFCs to less toxic components is poorly understood. To better understand the spatial distribution and fate of NAFCs in natural wetlands, samples were collected across the surfaces of two mature opportunistic wetlands near active oil sands mines. The first wetland has a well-defined surface flow pathway and inflows affected by overburden containing lean bitumen ore. The second wetland, in contrast, is a stagnant water body with raw bitumen visible along its edges. For the wetland with a well defined flow path, NAFCs decreased in concentration down gradient, while oxidized NAFCs constituted a greater proportion of NAFCs with increase in flow path. Likewise there was a decrease in the molecular weights of NAFCs, similar to trends observed in constructed wetland treatment systems. In comparison, NAFCs were more uniformly distributed across the relatively stagnant wetland. Overall, these data provide new evidence that mature opportunistic wetlands in the AOSR can promote the degradation and oxidation of bitumen-derived naphthenic acids into less toxic compounds.

A Direct Mass Spectrometry Method for the Rapid Analysis of Ubiquitous Tire-Derived Toxin N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine Quinone (6-PPDQ)

The oxidative transformation product of a common tire preservative, identified as N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6-PPDQ), has recently been found to contribute to "urban runoff mortality syndrome" in Coho salmon at nanogram per liter levels. Given the number of fish-bearing streams with multiple stormwater inputs, large-scale campaigns to identify 6-PPDQ sources and evaluate mitigation strategies will require sensitive, high-throughput analytical methods. We report the development and optimization of a direct sampling tandem mass spectrometry method for semiquantitative 6-PPDQ determinations using a thin polydimethylsiloxane membrane immersion probe. The method requires no sample cleanup steps or chromatographic separations, even in complex, heterogeneous samples. Quantitation is achieved by the method of standard additions, with a detection limit of 8 ng/L and a duty cycle of 15 min/sample. High-throughput screening provides semiquantitative concentrations with similar sensitivity and a full analytical duty cycle of 2.5 min/sample. Preliminary data and performance metrics are reported for 6-PPDQ present in representative environmental and stormwater samples. The method is readily adapted for real-time process monitoring, demonstrated by following the dissolution of 6-PPDQ from tire fragments and subsequent removal in response to added sorbents.

Characterization of naphthenic acid fraction compounds in water from Athabasca oil sands wetlands by Orbitrap high-resolution mass spectrometry

Classical naphthenic acids (NAs) are known to be primary aquatic toxicants of concern in the Athabasca oil sands region (AOSR), and are a component of naphthenic acid fraction compounds (NAFCs). Recent studies conducted in the AOSR have examined metals and polycyclic aromatic hydrocarbons in regional wetlands. However, few studies have described NAs and/or NAFCs in AOSR wetlands. To address this gap, we examined NAFC profiles in the water of different wetlands in the AOSR, including naturalized borrow pits (i.e., abandoned pits created by excavation of road-building materials), and opportunistically-formed wetlands associated with reclamation activities. For comparison, NAFC profiles from these wetlands were compared to an opportunistic wetland formed from tailings pond dyke seepage. Samples were prepared using solid-phase extraction and analyzed using negative-ion high-resolution Orbitrap mass spectrometry. Principal component analyses (PCA) revealed patterns to the NAFC profiles in the wetlands. The first distinct grouping of wetlands included water bodies associated with reclamation activities that are located on and/or adjacent to mining overburden. One other wetland, HATS5w, separated from all other wetlands during PCA, and had a unique NAFC profile; detailed examination of NAFCs revealed HATS5w contained the heaviest (i.e., high m/z components) and most unsaturated NAFCs among study locations, demonstrating the usefulness of high-resolution mass spectrometry for characterizing individual wetlands. The NAFCs of HATS5w are also substantially different from bitumen-derived inputs in overburden-adjacent opportunistic wetlands. Collectively, the NAFC profiles presented provide new information on background levels of polar bitumen-derived organics in AOSR wetlands.

Molecular profiles of naphthenic acid fraction compounds from mine lease wetlands in the Athabasca Oil Sands Region

Naphthenic acid fraction compounds (NAFCs) are a toxicologically relevant component of oil sands process-affected materials (OSPM). For the first time, we report on differences in the concentrations and distribution of NAFCs from wetlands on an Athabasca oil sands mine site with varied histories of solid and liquid OSPM input. Sampling locations included natural and naturalized reference wetlands, a reclaimed tailings pond, wetlands supplemented with OSPM, opportunistic wetlands, and tailings ponds. Samples were prepared using solid-phase extraction, and analyzed by high-resolution Orbitrap mass spectrometry; NAFC concentrations and characteristics were evaluated for all locations. The NAFCs from tailings ponds were dominated by O₃-NAFCs and classical naphthenic acids (NAs; i.e., O₂ species) with double bond equivalences of 3 and 4. Reference wetlands had no dominant species, and relatively little NAFC content. The heteroatomic species in opportunistic wetlands were dominated by highly-oxidized NAFC species, where Σ [O₃:O₆] species constituted 55-75% of the assignable spectrum and 3-4% NAs; in tailings ponds NAs constituted 47-51%. A relatively young (4-year-old) wetland built on a former tailings pond had NAFC concentrations between 65 and 80 mg/L, and NAs constituted 47% of the assignable spectrum. There was thus little apparent oxidation of NAFCs at this young wetland. The composition of NAFCs from one wetland (≥15 years old) supplemented with OSPM contained a greater proportion of oxidized species than tailings, suggesting NAFC transformation therein. These data suggest that while NAFCs are persistent in some wetlands, there is preliminary evidence for oxidation in mature wetlands.

Direct mass spectrometric analysis of naphthenic acids and polycyclic aromatic hydrocarbons in waters impacted by diluted bitumen and conventional crude oil

Crude oil spills have well-documented, deleterious impacts on the hydrosphere. In addition to macroscopic effects on wildlife and waterscapes, several classes of petroleum derived compounds, such as naphthenic acids (NAs) and polycyclic aromatic hydrocarbons (PAHs), may be released into the water and present aquatic contamination hazards. The concentrations of these contaminants may be affected by both oil type and water chemistry. We characterize the concentrations of NAs and PAHs in natural and constructed waters, spanning a range of pH and salinity, and directly compare the influence of diluted bitumen (DB) and conventional crude (CC) oil, using condensed-phase membrane introduction mass spectrometry (CP-MIMS) as a direct sampling, on-line technique. The concentration and isomer class profiles of classical NAs in the aqueous phase were assessed using electrospray ionization in negative-ion mode as [M-H]^- whereas PAH concentrations were monitored using liquid electron ionization (LEI) in positive-ion mode as [M^+•]. NA concentrations (0.03-25 ppm) were highly pH-dependent, and an order of magnitude greater in water samples contaminated with DB than CC. Conversely, concentrations of naphthalene (10-130 ppb) and alkyl-naphthalenes (10-90 ppb) were three to four-fold higher in water samples exposed to CC. We demonstrate that naturally occurring dissolved organic matter does not bias results from the membrane sampling approach employed, and that DB and CC contaminated waters can be differentiated using principal component analysis of the NA isomer class distribution in both constructed and natural waters. Finally, we describe the first demonstration of the concurrent analysis of trace NAs and PAHs in the same water sample by controlling perm-selectivity at the membrane and the ionization mode of the mass spectrometer. The techniques employed here for trace analysis of petroleum derived compounds in water can be applied to rapid screening and real-time monitoring of contamination and remediation processes.

Direct analysis of naphthenic acids in constructed wetland samples by condensed phase membrane introduction mass spectrometry

The application of direct mass spectrometry techniques to the analysis of complex samples has a number of advantages including reduced sample handling, higher sample throughput, in situ process monitoring, and the potential for adaptation to on-site analysis. We report the application of a semi-permeable capillary hollow fibre membrane probe (immersed directly into an aqueous sample) coupled to a triple quadrupole mass spectrometer by a continuously flowing methanol acceptor phase for the rapid analysis of naphthenic acids with unit mass resolution. The intensity of the naphthenic acid-associated peaks in the mass spectrum are normalized to an internal standard in the acceptor phase for quantitation and the relative abundance of the peaks in the mass spectrum are employed to monitor compositional changes in the naphthenic acid mixture using principle component analysis. We demonstrate the direct analysis of a synthetic oil sands process-affected water for classical naphthenic acids (C_nH_2n+zO₂) as they are attenuated through constructed wetlands containing sedge (Carex aquatilis), cattail (Typha latifolia), or bulrush (Schoenoplectus acutus). Quantitative results for on-line membrane sampling compare favourably to those obtained by solid-phase extraction high-resolution mass spectrometry. Additionally, chemometric analysis of the mass spectra indicates a clear discrimination between naphthenic acid-influenced and natural background waters. Furthermore, the compositional changes within complex naphthenic acid mixtures track closely with the degree of attenuation. Overall, the technique is successful in following changes in both the concentration and composition of naphthenic acids from synthetic oil sands process-affected waters, with the potential for high throughput screening and environmental forensics.

Mass Spectrometry Based Approach for Organic Synthesis Monitoring

Current mass spectrometry-based methodologies for synthetic organic reaction monitoring largely use electrospray ionization (ESI), or other related atmospheric pressure ionization-based approaches. Monitoring of complex, heterogeneous systems may be problematic because of sampling hardware limitations, and many relevant analytes (neutrals) exhibit poor ESI performance. An alternative monitoring strategy addressing this significant impasse is condensed phase membrane introduction mass spectrometry using liquid electron ionization (CP-MIMS-LEI). In CP-MIMS, a semipermeable silicone membrane selects hydrophobic neutral analytes, rejecting particulates and charged chemical components. Analytes partition through the membrane, and are then transported to the LEI interface for sequential nebulization, vaporization, and ionization. CP-MIMS and LEI are both ideal for continuous monitoring applications of hydrophobic neutral molecules. We demonstrate quantitative reaction monitoring of harsh, complex reaction mixtures (alkaline, acidic, heterogeneous) in protic and aprotic organic solvents. Also presented are solvent-membrane compatibility investigations and, in situ quantitative monitoring of catalytic oxidation and alkylation reactions.

Direct Measurement of Acid Dissociation Constants of Trace Organic Compounds at Nanomolar Levels in Aqueous Solution by Condensed Phase-Membrane Introduction Mass Spectrometry

We report the use of condensed phase-membrane introduction mass spectrometry as a novel method for the determination of acid dissociation constants for hydrophobic organic acids in aqueous solution at nanomolar concentrations. The technique is based on the pH-dependent permeation of analytes through a semipermeable polydimethylsiloxane membrane probe that is immersed directly in aqueous samples. We describe the method and report the dissociation constant (pK_a ) values for compounds of biological and environmental relevance, including contaminants, pharmaceuticals, and naphthenic acids. The approach can be applied to individual compounds, combined suites, and complex mixtures at parts-per-billion levels. We report pK_a values for 10 carboxylic acids with precision estimates and relative errors (where reliable literature values are available) of <0.1 log units. We report acidity constants for 2-methyl-3-methoxy-4-phenyl butanoic acid (a biomarker for microcystin algal toxins) and 4-t-butylcyclohexane carboxylic acid (a model naphthenic acid) as 4.28 ± 0.03 and 5.15 ± 0.05, respectively. Furthermore, we employ this approach to measure the effect of both temperature and deuterium oxide (heavy water) on acid dissociation, reporting the enthalpy and entropy changes for the ionization of a representative carboxylic acid and substituted phenol. Environ Toxicol Chem 2019;38:1879-1889. © 2019 SETAC.

Direct quantitation and characterization of fatty acids in salmon tissue by condensed phase membrane introduction mass spectrometry (CP-MIMS) using a modified donor phase

Existing mass spectrometric methods for the analysis of fatty acids often require derivatization, chromatographic separations, and/or extensive sample preparation. Direct mass spectrometry strategies can avoid these requirements, but may also suffer from poor quantitation and/or lack of sensitivity. Condensed phase-membrane introduction mass spectrometry (CP-MIMS) provides direct quantitative measurements of analytes in complex samples with little or no sample preparation. CP-MIMS uses a semipermeable membrane to transfer neutral, hydrophobic compounds from real-world samples to a mass spectrometer. The results presented utilize aqueous/organic sample solvent (donor) mixtures to allow for the sensitive (pptr) detection of a range of fatty acids. The relative sensitivity across a homologous series of fatty acids is observed to change, favoring short- or long-chain fatty acids, depending on the amount of miscible co-solvent added to the donor phase. Further, lithium acetate added online via the acceptor phase was used in tandem mass spectrometry experiments to determine the location of double bonds in polyunsaturated fatty acids (PUFAs). The method was applied to direct measurements and structural determinations for selected PUFAs in salmon tissue samples. Standard addition was employed to quantify the amount of PUFAs in a variety of salmon samples, yielding 0.27-0.42 and 0.40-0.84 w/w % for eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), respectively, for Sockeye and Chinook salmon, in good agreement with the literature. This work presents, to our knowledge, the first use of CP-MIMS for the direct analysis of fatty acids in oily foodstuff samples. Graphical abstract ᅟ.

A micro-solid phase extraction in glass pipette packed with amino-functionalized silica for rapid analysis of petroleum acids in crude oils

A convenient micro-SPE was designed for rapid analysis of petroleum acids in crude oils.

Rapid Screening of Carboxylic Acids from Waste and Surface Waters by ESI-MS/MS Using Barium Ion Chemistry and On-Line Membrane Sampling

Negative ion tandem mass spectrometric analysis of aliphatic carboxylic acids often yields only non-diagnostic ([M - H](-)) ions with limited selective fragmentation. However, carboxylates cationized with Ba(2+) have demonstrated efficient dissociation in positive ion mode, providing structurally diagnostic product ions. We report the application of barium adducts followed by collision induced dissociation (CID), to improve selectivity for rapid screening of carboxylic acids in complex aqueous samples. The quantitative MS/MS method presented utilizes common product ions of [M - H + Ba](+) precursor ions. The mechanism of product ion formation is investigated using isotopically labeled standards and a series of structurally related carboxylic acids. The results suggest that hydrogen atoms in the β and γ positions yield common product ions ([BaH](+) and [BaOH](+)). Furthermore, the diagnostic product ion at m/z 196 serves as a qualifying ion for carboxylate species. This methodology has been successfully used in conjunction with condensed phase membrane introduction mass spectrometry (CP-MIMS), with barium acetate added directly to the methanol acceptor phase. The combination enables rapid screening of carboxylic acids directly from acidified water samples (wastewater effluent, spiked natural waters) using a capillary hollow fiber PDMS membrane immersion probe. We have applied this technique for the direct analysis of complex naphthenic acid mixtures spiked into natural surface waters using CP-MIMS. Selectivity at the ionization and tandem mass spectrometry level eliminate isobaric interferences from hydroxylated species present within the samples, which have been observed in negative electrospray ionization.