Mechanical modulation of tenascin-C and collagen-XII expression during avian synovial joint formation

Biology of Tenascin C and its Role in Physiology and Pathology

Tenascin-C (TNC) is a multimodular extracellular matrix (ECM) protein hexameric with several molecular forms (180-250 kDa) produced by alternative splicing at the pre-mRNA level and protein modifications. The molecular phylogeny indicates that the amino acid sequence of TNC is a well-conserved protein among vertebrates. TNC has binding partners, including fibronectin, collagen, fibrillin-2, periostin, proteoglycans, and pathogens. Various transcription factors and intracellular regulators tightly regulate TNC expression. TNC plays an essential role in cell proliferation and migration. Unlike embryonic tissues, TNC protein is distributed over a few tissues in adults. However, higher TNC expression is observed in inflammation, wound healing, cancer, and other pathological conditions. It is widely expressed in a variety of human malignancies and is recognized as a pivotal factor in cancer progression and metastasis. Moreover, TNC increases both pro-and anti-inflammatory signaling pathways. It has been identified as an essential factor in tissue injuries such as damaged skeletal muscle, heart disease, and kidney fibrosis. This multimodular hexameric glycoprotein modulates both innate and adaptive immune responses regulating the expression of numerous cytokines. Moreover, TNC is an important regulatory molecule that affects the onset and progression of neuronal disorders through many signaling pathways. We provide a comprehensive overview of the structural and expression properties of TNC and its potential functions in physiological and pathological conditions.

Local mechanical stimuli correlate with tissue growth in axolotl salamander joint morphogenesis

Movement-induced forces are critical to correct joint formation, but it is unclear how cells sense and respond to these mechanical cues. To study the role of mechanical stimuli in the shaping of the joint, we combined experiments on regenerating axolotl (Ambystoma mexicanum) forelimbs with a poroelastic model of bone rudiment growth. Animals either regrew forelimbs normally (control) or were injected with a transient receptor potential vanilloid 4 (TRPV4) agonist during joint morphogenesis. We quantified growth and shape in regrown humeri from whole-mount light sheet fluorescence images of the regenerated limbs. Results revealed significant differences in morphology and cell proliferation between groups, indicating that TRPV4 desensitization has an effect on joint shape. To link TRPV4 desensitization with impaired mechanosensitivity, we developed a finite element model of a regenerating humerus. Local tissue growth was the sum of a biological contribution proportional to chondrocyte density, which was constant, and a mechanical contribution proportional to fluid pressure. Computational predictions of growth agreed with experimental outcomes of joint shape, suggesting that interstitial pressure driven from cyclic mechanical stimuli promotes local tissue growth. Predictive computational models informed by experimental findings allow us to explore potential physical mechanisms involved in tissue growth to advance our understanding of the mechanobiology of joint morphogenesis.

Comparison of Tendon Development Versus Tendon Healing and Regeneration

Tendon is a vital connective tissue in human skeletal muscle system, and tendon injury is very common and intractable in clinic. Tendon development and repair are two closely related but still not fully understood processes. Tendon development involves multiple germ layer, as well as the regulation of diversity transcription factors (Scx et al.), proteins (Tnmd et al.) and signaling pathways (TGFβ et al.). The nature process of tendon repair is roughly divided in three stages, which are dominated by various cells and cell factors. This review will describe the whole process of tendon development and compare it with the process of tendon repair, focusing on the understanding and recent advances in the regulation of tendon development and repair. The study and comparison of tendon development and repair process can thus provide references and guidelines for treatment of tendon injuries.

Computational insights into the substrate recognition mechanism of cartilage extracellular matrix degradation

Articular cartilage is connective tissue that forms a slippery load-bearing joint surface between bones. With outstanding mechanical properties, it plays an essential role in cushioning impact and protecting the ends of bones. Abnormal mechanical stimulation, such as repetitive overloading or chondral injury, induces excessive cartilage extracellular matrix (ECM) degradation, leading to osteoarthritis and other joint disorders. A disintegrin and metalloproteinase with thrombospondin motifs-5 (ADAMTS-5) is an aggrecanase that dominates the catalysis of aggrecan, the major proteoglycan in the cartilage ECM. Intriguingly, unlike its critical cleavage site Glu373-374Ala, another potential cleavage site, Glu419-420Ala, composed of the same amino acids in the aggrecan interglobular domain, is not a major cleavage site. It remains unclear how ADAMTS-5 distinguishes between them and hydrolyzes the correct scissile bonds. This research introduces a bottom-up in silico approach to reveal the molecular mechanism by which ADAMTS-5 recognizes the cleavage site on aggrecan. It is hypothesized that the sequence in the vicinity assists ADAMTS-5 in positioning the cleavage site. Specific residues were found to serve as binding sites, helping aggrecan bind more stably and fit into the enzyme better. The findings provide insight into the substrate binding and recognition mechanism for cartilage ECM degradation from a brand new atomic-scale perspective, laying the foundation for prophylaxis and treatment of related joint diseases.

Chondrocyte protein co-synthesis network analysis links ECM mechanosensing to metabolic adaptation in osteoarthritis

BACKGROUND

Knee osteoarthritis (OA) is one of the most common structural OA disorders globally. Incomplete understanding of the fundamental biological aspects of osteoarthritis underlies the current lack of effective treatment or disease modifying drugs.

RESEARCH DESIGN AND METHODS

We implemented a systems approach by making use of the statistical network concepts in Weighted Gene Co-expression Analysis to reconstruct the organization of the core proteome network in chondrocytes obtained from OA patients and healthy individuals. Protein modules reflect groups of tightly co-ordinated changes in protein abundance across healthy and OA chondrocytes.

RESULTS

The unbiased systems analysis identified extracellular matrix (ECM) mechanosensing and glycolysis as two modules that are most highly correlated with ΟΑ. The ECM module was enriched in the OA genetic risk factors tenascin-C (TNC) and collagen 11A1 (COL11A1), as well as in cartilage oligomeric matrix protein (COMP), a biomarker associated with cartilage integrity. Mapping proteins that are unique to OA or healthy chondrocytes onto the core interactome, which connects microenvironment sensing and regulation of glycolysis, identified differences in metabolic and anti-inflammatory adaptation.

CONCLUSION

The interconnection between cartilage ECM remodeling and metabolism is indicative of the dynamic chondrocyte states and their significance in osteoarthritis.

Transcriptional profiling of mESC-derived tendon and fibrocartilage cell fate switch

The transcriptional regulators underlying induction and differentiation of dense connective tissues such as tendon and related fibrocartilaginous tissues (meniscus and annulus fibrosus) remain largely unknown. Using an iterative approach informed by developmental cues and single cell RNA sequencing (scRNA-seq), we establish directed differentiation models to generate tendon and fibrocartilage cells from mouse embryonic stem cells (mESCs) by activation of TGFβ and hedgehog pathways, achieving 90% induction efficiency. Transcriptional signatures of the mESC-derived cells recapitulate embryonic tendon and fibrocartilage signatures from the mouse tail. scRNA-seq further identify retinoic acid signaling as a critical regulator of cell fate switch between TGFβ-induced tendon and fibrocartilage lineages. Trajectory analysis by RNA sequencing define transcriptional modules underlying tendon and fibrocartilage fate induction and identify molecules associated with lineage-specific differentiation. Finally, we successfully generate 3-dimensional engineered tissues using these differentiation protocols and show activation of mechanotransduction markers with dynamic tensile loading. These findings provide a serum-free approach to generate tendon and fibrocartilage cells and tissues at high efficiency for modeling development and disease.

Novel contribution to clubfoot pathogenesis: The possible role of extracellular matrix proteins

Idiopathic pes equinovarus (clubfoot) is a congenital deformity of the feet and lower legs. Clubfoot belongs to a group of fibro-proliferative disorders but its origin remains unknown. Our study aimed to achieve the first complex proteomic comparison of clubfoot contracted tissue of the foot (medial side; n = 16), with non-contracted tissue (lateral side; n = 13). We used label-free mass spectrometry quantification and immunohistochemistry. Seven proteins were observed to be significantly upregulated in the medial side (asporin, collagen type III, V, and VI, versican, tenascin-C, and transforming growth factor beta induced protein) and four in the lateral side (collagen types XII and XIV, fibromodulin, and cartilage intermediate layer protein 2) of the clubfoot. Comparison of control samples from cadavers brought only two different protein concentrations (collagen types I and VI). We also revealed pathological calcification and intracellular positivity of transforming growth factor beta only in the contracted tissue of clubfoot. Most of the 11 differently expressed proteins are strongly related to the extracellular matrix architecture and we assume that they may play specific roles in the pathogenesis of this deformity. These proteins seem to be promising targets for future investigations and treatment of this disease. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Prenatal growth map of the mouse knee joint by means of deformable registration technique

Joint morphogenesis is the process during which distinct and functional joint shapes emerge during pre- and post-natal joint development. In this study, a repeatable semi-automatic protocol capable of providing a 3D realistic developmental map of the prenatal mouse knee joint was designed by combining Optical Projection Tomography imaging (OPT) and a deformable registration algorithm (Sheffield Image Registration toolkit, ShIRT). Eleven left limbs of healthy murine embryos were scanned with OPT (voxel size: 14.63μm) at two different stages of development: Theiler stage (TS) 23 (approximately 14.5 embryonic days) and 24 (approximately 15.5 embryonic days). One TS23 limb was used to evaluate the precision of the displacement predictions for this specific case. The remaining limbs were then used to estimate Developmental Tibia and Femur Maps. Acceptable uncertainties of the displacement predictions computed from repeated images were found for both epiphyses (between 1.3μm and 1.4μm for the proximal tibia and between 0.7μm and 1.0μm for the femur, along all directions). The protocol was found to be reproducible with maximum Modified Housdorff Distance (MHD) differences equal to 1.9 μm and 1.5 μm for the tibial and femoral epiphyses respectively. The effect of the initial shape of the rudiment affected the developmental maps with MHD of 21.7 μm and 21.9 μm for the tibial and femoral epiphyses respectively, which correspond to 1.4 and 1.5 times the voxel size. To conclude, this study proposes a repeatable semi-automatic protocol capable of providing mean 3D realistic developmental map of a developing rudiment allowing researchers to study how growth and adaptation are directed by biological and mechanobiological factors.

Embryo movements regulate tendon mechanical property development

Tendons transmit forces from muscles to bones to enable skeletal motility. During development, tendons begin to bear load at the onset of embryo movements. Using the chick embryo model, this study showed that altered embryo movement frequency led to changes in elastic modulus of calcaneal tendon. In particular, paralysis led to decreased modulus, whereas hypermotility led to increased modulus. Paralysis also led to reductions in activity levels of lysyl oxidase (LOX), an enzyme that we previously showed is required for cross-linking-mediated elaboration of tendon mechanical properties. Additionally, inhibition of LOX activity abrogated hypermotility-induced increases in modulus. Taken together, our findings suggest embryo movements are critical for tendon mechanical property development and implicate LOX in this process. These exciting findings expand current knowledge of how functional tendons form during development and could guide future clinical approaches to treat tendon defects associated with abnormal mechanical loading in utero.

This article is part of the Theo Murphy meeting issue ‘Mechanics of development’.

Changing While Staying the Same: Preservation of Structural Continuity During Limb Evolution by Developmental Integration

More than 150 years since Charles Darwin published "On the Origin of Species", gradual evolution by natural selection is still not fully reconciled with the apparent sudden appearance of complex structures, such as the bat wing, with highly derived functions. This is in part because developmental genetics has not yet identified the number and types of mutations that accumulated to drive complex morphological evolution. Here, we consider the experimental manipulations in laboratory model systems that suggest tissue interdependence and mechanical responsiveness during limb development conceptually reduce the genetic complexity required to reshape the structure as a whole. It is an exciting time in the field of evolutionary developmental biology as emerging technical approaches in a variety of non-traditional laboratory species are on the verge of filling the gaps between theory and evidence to resolve this sesquicentennial debate.

Informing Stem Cell-Based Tendon Tissue Engineering Approaches with Embryonic Tendon Development

Adult tendons fail to regenerate normal tissue after injury, and instead form dysfunctional scar tissue with abnormal mechanical properties. Surgical repair with grafts is the current standard to treat injuries, but faces significant limitations including pain and high rates of re-injury. To address this, we aim to regenerate new, normal tendons to replace dysfunctional tendons. A common approach to tendon tissue engineering is to design scaffolds and bioreactors based on adult tendon properties that can direct adult stem cell tenogenesis. Despite significant progress, advances have been limited due, in part, to a need for markers and potent induction cues. Our goal is to develop novel tendon tissue engineering approaches informed by embryonic tendon development. We are characterizing structure-property relationships of embryonic tendon to identify design parameters for three-dimensional scaffolds and bioreactor mechanical loading systems to direct adult stem cell tenogenesis. We will review studies in which we quantified changes in the mechanical and biochemical properties of tendon during embryonic development and elucidated specific mechanisms of functional property elaboration. We then examined the effects of these mechanical and biochemical factors on embryonic tendon cell behavior. Using custom-designed bioreactors, we also examined the effects of dynamic mechanical loading and growth factor treatment on embryonic tendon cells. Our findings have established cues to induce tenogenesis as well as metrics to evaluate differentiation. We finish by discussing how we have evaluated the tenogenic differentiation potential of adult stem cells by comparing their responses to that of embryonic tendon cells in these culture systems.

Mechanical regulation of musculoskeletal system development

During embryogenesis, the musculoskeletal system develops while containing within itself a force generator in the form of the musculature. This generator becomes functional relatively early in development, exerting an increasing mechanical load on neighboring tissues as development proceeds. A growing body of evidence indicates that such mechanical forces can be translated into signals that combine with the genetic program of organogenesis. This unique situation presents both a major challenge and an opportunity to the other tissues of the musculoskeletal system, namely bones, joints, tendons, ligaments and the tissues connecting them. Here, we summarize the involvement of muscle-induced mechanical forces in the development of various vertebrate musculoskeletal components and their integration into one functional unit.

Mechano-sensitive regulation of gene expression during the embryonic development

Cell movements during embryogenesis produce mechanical tensions that shape the embryo and can also regulate gene expression, thereby affecting cell differentiation. Increasing evidence indicates that mechanosensitive regulation of gene expression plays important roles during embryogenesis by coupling the processes of morphogenesis and differentiation. However, the molecular mechanisms of this phenomenon remain poorly understood. This review focuses on the molecular mechanisms that "translate" mechanical stimuli into gene expression.

In silico bone mechanobiology: modeling a multifaceted biological system

Mechanobiology, the study of the influence of mechanical loads on biological processes through signaling to cells, is fundamental to the inherent ability of bone tissue to adapt its structure in response to mechanical stimulation. The immense contribution of computational modeling to the nascent field of bone mechanobiology is indisputable, having aided in the interpretation of experimental findings and identified new avenues of inquiry. Indeed, advances in computational modeling have spurred the development of this field, shedding new light on problems ranging from the mechanical response to loading by individual cells to tissue differentiation during events such as fracture healing. To date, in silico bone mechanobiology has generally taken a reductive approach in attempting to answer discrete biological research questions, with research in the field broadly separated into two streams: (1) mechanoregulation algorithms for predicting mechanobiological changes to bone tissue and (2) models investigating cell mechanobiology. Future models will likely take advantage of advances in computational power and techniques, allowing multiscale and multiphysics modeling to tie the many separate but related biological responses to loading together as part of a larger systems biology approach to shed further light on bone mechanobiology. Finally, although the ever‐increasing complexity of computational mechanobiology models will inevitably move the field toward patient‐specific models in the clinic, the determination of the context in which they can be used safely for clinical purpose will still require an extensive combination of computational and experimental techniques applied to in vitro and in vivo applications. WIREs Syst Biol Med 2016, 8:485–505. doi: 10.1002/wsbm.1356

For further resources related to this article, please visit the WIREs website.

The importance of foetal movement for co-ordinated cartilage and bone development in utero : clinical consequences and potential for therapy

Construction of a functional skeleton is accomplished through co-ordination of the developmental processes of chondrogenesis, osteogenesis, and synovial joint formation. Infants whose movement in utero is reduced or restricted and who subsequently suffer from joint dysplasia (including joint contractures) and thin hypo-mineralised bones, demonstrate that embryonic movement is crucial for appropriate skeletogenesis. This has been confirmed in mouse, chick, and zebrafish animal models, where reduced or eliminated movement consistently yields similar malformations and which provide the possibility of experimentation to uncover the precise disturbances and the mechanisms by which movement impacts molecular regulation. Molecular genetic studies have shown the important roles played by cell communication signalling pathways, namely Wnt, Hedgehog, and transforming growth factor-beta/bone morphogenetic protein. These pathways regulate cell behaviours such as proliferation and differentiation to control maturation of the skeletal elements, and are affected when movement is altered. Cell contacts to the extra-cellular matrix as well as the cytoskeleton offer a means of mechanotransduction which could integrate mechanical cues with genetic regulation. Indeed, expression of cytoskeletal genes has been shown to be affected by immobilisation. In addition to furthering our understanding of a fundamental aspect of cell control and differentiation during development, research in this area is applicable to the engineering of stable skeletal tissues from stem cells, which relies on an understanding of developmental mechanisms including genetic and physical criteria. A deeper understanding of how movement affects skeletogenesis therefore has broader implications for regenerative therapeutics for injury or disease, as well as for optimisation of physical therapy regimes for individuals affected by skeletal abnormalities.

Cite this article: Bone Joint Res 2015;4:105–116

Comparative analysis of mesenchymal stem cell and embryonic tendon progenitor cell response to embryonic tendon biochemical and mechanical factors

Introduction

Advances in tendon engineering with mesenchymal stem cells (MSCs) are hindered by a need for cues to direct tenogenesis, and markers to assess tenogenic state. We examined the effects of factors involved in embryonic tendon development on adult MSCs, and compared MSC responses to that of embryonic tendon progenitor cells (TPCs), a model system of tenogenically differentiating cells.

Methods

Murine MSCs and TPCs subjected to cyclic tensile loading, transforming growth factor-β2 (TGFβ2), and fibroblast growth factor-4 (FGF4) in vitro were assessed for proliferation and mRNA levels of scleraxis, TGFβ2, tenomodulin, collagen type I and elastin.

Results

Before treatment, scleraxis and elastin levels in MSCs were lower than in TPCs, while other tendon markers expressed at similar levels in MSCs as TPCs. TGFβ2 alone and combined with loading were tenogenic based on increased scleraxis levels in both MSCs and TPCs. Loading alone had minimal effect. FGF4 downregulated tendon marker levels in MSCs but not in TPCs. Select tendon markers were not consistently upregulated with scleraxis, demonstrating the importance of characterizing a profile of markers.

Conclusions

Similar responses as TPCs to specific treatments suggest MSCs have tenogenic potential. Potentially shared mechanisms of cell function between MSCs and TPCs should be investigated in longer term studies.

Tenascin-C in development and disease of blood vessels

Tenascin-C (TNC) is an extracellular glycoprotein categorized as a matricellular protein. It is highly expressed during embryonic development, wound healing, inflammation, and cancer invasion, and has a wide range of effects on cell response in tissue morphogenesis and remodeling including the cardiovascular system. In the heart, TNC is sparsely detected in normal adults but transiently expressed at restricted sites during embryonic development and in response to injury, playing an important role in myocardial remodeling. Although TNC in the vascular system appears more complex than in the heart, the expression of TNC in normal adult blood vessels is generally low. During embryonic development, vascular smooth muscle cells highly express TNC on maturation of the vascular wall, which is controlled in a way that depends on the embryonic site of cell origin. Strong expression of TNC is also linked with several pathological conditions such as cerebral vasospasm, intimal hyperplasia, pulmonary artery hypertension, and aortic aneurysm/ dissection. TNC synthesized by smooth muscle cells in response to developmental and environmental cues regulates cell responses such as proliferation, migration, differentiation, and survival in an autocrine/paracrine fashion and in a context-dependent manner. Thus, TNC can be a key molecule in controlling cellular activity in adaptation during normal vascular development as well as tissue remodeling in pathological conditions.

Tenascin-C and mechanotransduction in the development and diseases of cardiovascular system

Living tissue is composed of cells and extracellular matrix (ECM). In the heart and blood vessels, which are constantly subjected to mechanical stress, ECM molecules form well-developed fibrous frameworks to maintain tissue structure. ECM is also important for biological signaling, which influences various cellular functions in embryonic development, and physiological/pathological responses to extrinsic stimuli. Among ECM molecules, increased attention has been focused on matricellular proteins. Matricellular proteins are a growing group of non-structural ECM proteins highly up-regulated at active tissue remodeling, serving as biological mediators. Tenascin-C (TNC) is a typical matricellular protein, which is highly expressed during embryonic development, wound healing, inflammation, and cancer invasion. The expression is tightly regulated, dependent on the microenvironment, including various growth factors, cytokines, and mechanical stress. In the heart, TNC appears in a spatiotemporal-restricted manner during early stages of development, sparsely detected in normal adults, but transiently re-expressed at restricted sites associated with tissue injury and inflammation. Similarly, in the vascular system, TNC is strongly up-regulated during embryonic development and under pathological conditions with an increase in hemodynamic stress. Despite its intriguing expression pattern, cardiovascular system develops normally in TNC knockout mice. However, deletion of TNC causes acute aortic dissection (AAD) under strong mechanical and humoral stress. Accumulating reports suggest that TNC may modulate the inflammatory response and contribute to elasticity of the tissue, so that it may protect cardiovascular tissue from destructive stress responses. TNC may be a key molecule to control cellular activity during development, adaptation, or pathological tissue remodeling.

Immobilized chicks as a model system for early-onset developmental dysplasia of the hip

We have almost no understanding of how our joints take on their range of distinctive shapes, despite the clinical relevance of joint morphogenesis to postnatal skeletal malformations such as developmental dysplasia of the hip (DDH). In this study, we investigate the role of spontaneous prenatal movements in joint morphogenesis using pharmacological immobilization of developing chicks, and assess the system as a suitable model for early-onset hip dysplasia. We show that, prior to joint cavitation, the lack of dynamic muscle contractions has little impact on the shape of the hip joint. However, after the timepoint at which cavitation occurs, a dramatic effect on hip joint morphogenesis was observed. Effects in the immobilized chicks included flattening of the proximal femur, abnormal orientation of the pelvis relative to the femur and abnormal placement and coverage of the acetabulum. Although many clinical case studies have identified reduced or restricted movement as a risk factor for DDH, this study provides the first experimental evidence of the role of prenatal movements in early hip joint development. We propose that the immobilized chick embryo serves as a suitable model system for the type of early-onset DDH which arises due to neuromuscular conditions such as spinal muscular atrophy.

Informing tendon tissue engineering with embryonic development

Tendon is a strong connective tissue that transduces muscle-generated forces into skeletal motion. In fulfilling this role, tendons are subjected to repeated mechanical loading and high stress, which may result in injury. Tissue engineering with stem cells offers the potential to replace injured/damaged tissue with healthy, new living tissue. Critical to tendon tissue engineering is the induction and guidance of stem cells towards the tendon phenotype. Typical strategies have relied on adult tissue homeostatic and healing factors to influence stem cell differentiation, but have yet to achieve tissue regeneration. A novel paradigm is to use embryonic developmental factors as cues to promote tendon regeneration. Embryonic tendon progenitor cell differentiation in vivo is regulated by a combination of mechanical and chemical factors. We propose that these cues will guide stem cells to recapitulate critical aspects of tenogenesis and effectively direct the cells to differentiate and regenerate new tendon. Here, we review recent efforts to identify mechanical and chemical factors of embryonic tendon development to guide stem/progenitor cell differentiation toward new tendon formation, and discuss the role this work may have in the future of tendon tissue engineering.

Mechanical factors in embryonic tendon development: potential cues for stem cell tenogenesis

Tendons are connective tissues required for motion and are frequently injured. Poor healing and inadequate return to normal tissue structure and mechanical function make tendon a prime candidate for tissue engineering; however functional tendons have yet to be engineered. The physical environment, from substrate stiffness to dynamic mechanical loading, may regulate tenogenic stem cell differentiation. Tissue stiffness and loading parameters derived from embryonic development may enhance tenogenic stem cell differentiation and tendon tissue formation. We highlight the current understanding of the mechanical environment experienced by embryonic tendons and how progenitor cells may sense and respond to physical inputs. We further discuss how mechanical factors have only recently been used to induce tenogenic fate in stem cells.

Regulation of tenascin expression in bone

Tenascins regulate cell interaction with the surrounding pericellular matrix. Within bone, tenascins C and W influence osteoblast adhesion and differentiation, although little is known about the regulation of tenascin expression. In this study we examined the effect of osteogenic differentiation, bone morphogenetic protein (BMP) and Wnt growth factors, and mechanical loading on tenascin expression in osteogenic cells. Osteogenic differentiation increased tenascin C (TnC), and decreased tenascin W (TnW), expression. Both growth factors and mechanical loading increased both TnC and TnW expression, albeit via distinct signaling mechanisms. Both BMP-2 and Wnt5a induction of tenascin expression were mediated by MAP kinases. These data establish a role for BMP, Wnts, and mechanical loading in the regulation of tenascin expression in osteoblasts.

The role of mechanobiology in tendon healing

Mechanical cues affect tendon healing, homeostasis, and development in a variety of settings. Alterations in the mechanical environment are known to result in changes in the expression of extracellular matrix proteins, growth factors, transcription factors, and cytokines that can alter tendon structure and cell viability. Loss of muscle force in utero or in the immediate postnatal period delays tendon and enthesis development. The response of healing tendons to mechanical load varies depending on anatomic location. Flexor tendons require motion to prevent adhesion formation, yet excessive force results in gap formation and subsequent weakening of the repair. Excessive motion in the setting of anterior cruciate ligament reconstruction causes accumulation of macrophages, which are detrimental to tendon graft healing. Complete removal of load is detrimental to rotator cuff healing; yet, large forces are also harmful. Controlled loading can enhance healing in most settings; however, a fine balance must be reached between loads that are too low (leading to a catabolic state) and too high (leading to microdamage). This review will summarize existing knowledge of the mechanobiology of tendon development, homeostasis, and healing.

A hitchhiker's guide to mechanobiology

More than a century ago, it was proposed that mechanical forces could drive tissue formation. However, only recently with the advent of enabling biophysical and molecular technologies are we beginning to understand how individual cells transduce mechanical force into biochemical signals. In turn, this knowledge of mechanotransduction at the cellular level is beginning to clarify the role of mechanics in patterning processes during embryonic development. In this perspective, we will discuss current mechanotransduction paradigms, along with the technologies that have shaped the field of mechanobiology.

The transcriptional regulator megakaryoblastic leukemia-1 mediates serum response factor-independent activation of tenascin-C transcription by mechanical stress

The extracellular matrix protein tenascin-C (TNC) is up-regulated in processes influenced by mechanical stress, such as inflammation, tissue remodeling, wound healing, and tumorigenesis. Cyclic strain-induced TNC expression depends on RhoA-actin signaling, the pathway that regulates transcriptional activity of serum response factor (SRF) by its coactivator megakaryoblastic leukemia-1 (MKL1). Therefore, we tested whether MKL1 controls TNC transcription. We demonstrate that overexpression of MKL1 strongly induces TNC expression in mouse NIH3T3 fibroblasts and normal HC11 and transformed 4T1 mammary epithelial cells. Part of the induction was dependant on SRF and a newly identified atypical CArG box in the TNC promoter. Another part was independent of SRF but required the SAP domain of MKL1. An MKL1 mutant incapable of binding to SRF still strongly induced TNC, while induction of the SRF target c-fos was abolished. Cyclic strain failed to induce TNC in MKL1-deficient but not in SRF-deficient fibroblasts, and strain-induced TNC expression strongly depended on the SAP domain of MKL1. Promoter-reporter and chromatin immunoprecipitation experiments unraveled a SAP-dependent, SRF-independent interaction of MKL1 with the proximal promoter region of TNC, attributing for the first time a functional role to the SAP domain of MKL1 in regulating gene expression.

Mechanical influences on morphogenesis of the knee joint revealed through morphological, molecular and computational analysis of immobilised embryos

Very little is known about the regulation of morphogenesis in synovial joints. Mechanical forces generated from muscle contractions are required for normal development of several aspects of normal skeletogenesis. Here we show that biophysical stimuli generated by muscle contractions impact multiple events during chick knee joint morphogenesis influencing differential growth of the skeletal rudiment epiphyses and patterning of the emerging tissues in the joint interzone. Immobilisation of chick embryos was achieved through treatment with the neuromuscular blocking agent Decamethonium Bromide. The effects on development of the knee joint were examined using a combination of computational modelling to predict alterations in biophysical stimuli, detailed morphometric analysis of 3D digital representations, cell proliferation assays and in situ hybridisation to examine the expression of a selected panel of genes known to regulate joint development. This work revealed the precise changes to shape, particularly in the distal femur, that occur in an altered mechanical environment, corresponding to predicted changes in the spatial and dynamic patterns of mechanical stimuli and region specific changes in cell proliferation rates. In addition, we show altered patterning of the emerging tissues of the joint interzone with the loss of clearly defined and organised cell territories revealed by loss of characteristic interzone gene expression and abnormal expression of cartilage markers. This work shows that local dynamic patterns of biophysical stimuli generated from muscle contractions in the embryo act as a source of positional information guiding patterning and morphogenesis of the developing knee joint.

Mechanobiology of embryonic skeletal development: Insights from animal models

A range of clinical conditions in which fetal movement is reduced or prevented can have a severe effect on skeletal development. Animal models have been instrumental to our understanding of the interplay between mechanical forces and skeletal development, particularly the mouse and the chick model systems. In the chick, the most commonly used means of altering the mechanical environment is by pharmaceutical agents which induce paralysis, whereas genetically modified mice with nonfunctional or absent skeletal muscle offer a valuable tool for examining the interplay between muscle forces and skeletogenesis in mammals. This article reviews the body of research on animal models of bone or joint formation in vivo in the presence of an altered or abnormal mechanical environment. In both immobilized chicks and "muscleless limb" mice, a range of effects are seen, such as shorter rudiments with less bone formation, changes in rudiment and joint shape, and abnormal joint cavitation. However, although all bones and synovial joints are affected in immobilized chicks, some rudiments and joints are unaffected in muscleless mice. We propose that extrinsic mechanical forces from movements of the mother or littermates impact on skeletogenesis in mammals, whereas the chick embryo is reliant on intrinsic movement for mechanical stimulation. The insights gained from animal models into the mechanobiology of embryonic skeletal development could provide valuable cues to prospective tissue engineers of cartilage and bone and contribute to new or improved treatments to minimize the impact on skeletal development of reduced movement in utero.

From mechanotransduction to extracellular matrix gene expression in fibroblasts

Tissue mechanics provide an important context for tissue growth, maintenance and function. On the level of organs, external mechanical forces largely influence the control of tissue homeostasis by endo- and paracrine factors. On the cellular level, it is well known that most normal cell types depend on physical interactions with their extracellular matrix in order to respond efficiently to growth factors. Fibroblasts and other adherent cells sense changes in physical parameters in their extracellular matrix environment, transduce mechanical into chemical information, and integrate these signals with growth factor derived stimuli to achieve specific changes in gene expression. For connective tissue cells, production of the extracellular matrix is a prominent response to changes in mechanical load. We will review the evidence that integrin-containing cell-matrix adhesion contacts are essential for force transmission from the extracellular matrix to the cytoskeleton, and describe novel experiments indicating that mechanotransduction in fibroblasts depends on focal adhesion adaptor proteins that might function as molecular springs. We will stress the importance of the contractile actin cytoskeleton in balancing external with internal forces, and describe new results linking force-controlled actin dynamics directly to the expression of specific genes, among them the extracellular matrix protein tenascin-C. As assembly lines for diverse signaling pathways, matrix adhesion contacts are now recognized as the major sites of crosstalk between mechanical and chemical stimuli, with important consequences for cell growth and differentiation.

Tenascin-C induction by cyclic strain requires integrin-linked kinase

Induction of tenascin-C mRNA by cyclic strain in fibroblasts depends on RhoA and Rho dependent kinase (ROCK). Here we show that integrin-linked kinase (ILK) is required upstream of this pathway. In ILK-deficient fibroblasts, RhoA was not activated and tenascin-C mRNA remained low after cyclic strain; tenascin-C expression was unaffected by ROCK inhibition. In ILK wild-type but not ILK-/- fibroblasts, cyclic strain-induced reorganization of actin stress fibers and focal adhesions, as well as nuclear translocation of MAL, a transcriptional co-activator that links actin assembly to gene expression. These findings support a role for RhoA in ILK-mediated mechanotransduction. Rescue of ILK -/- fibroblasts by expression of wild-type ILK restored these responses to cyclic strain. Mechanosensation is not entirely abolished in ILK -/- fibroblasts, since cyclic strain activated Erk-1/2 and PKB/Akt, and induced c-fos mRNA in these cells. Conversely, lysophosphatidic acid stimulated RhoA and induced both c-fos and tenascin-C mRNA in ILK -/- cells. Thus, the signaling pathways controlling tenascin-C expression are functional in the absence of ILK, but are not triggered by cyclic strain. Our results indicate that ILK is selectively required for the induction of specific genes by mechanical stimulation via RhoA-mediated pathways.

Gene regulation by mechanotransduction in fibroblasts

Mechanical forces are important for connective tissue homeostasis. How do fibroblasts sense mechanical stress and how do they translate this information into an adaptive remodeling of the extracellular matrix (ECM)? Tenascin-C is rapidly induced in vivo by loading muscles and in vitro by stretching fibroblasts. Regulation of tenascin-C expression by mechanical signals occurs at the transcriptional level. Integrin receptors physically link the ECM to the cytoskeleton and act as force transducers: intracellular signals are triggered when integrins engage with ECM, and later when forces are applied. We found that cyclic strain does not induce tenascin-C messenger ribonucleic acid (mRNA) in fibroblasts lacking the beta1-integrin chain. An important link in integrin-dependent mechanotransduction is the small guanosine 5'-triphosphatase. RhoA and its target kinase, ROCK. In fibroblasts, cyclic strain activates RhoA and thereby induces ROCK-dependent actin assembly. Interestingly, tenascin-C mRNA induction by cyclic strain was suppressed by relaxing the cytoskeleton with a ROCK inhibitor or by actin depolymerization. Conversely, chemical activators of RhoA enhanced the effect of strain both on actin dynamics and on tenascin-C expression. Thus, RhoA/ROCK-controlled actin dynamics are required for the induction of specific ECM genes by mechanical stress. These findings have implications for the understanding of regeneration and for tissue engineering.

Temporomandibular joint formation and condyle growth require Indian hedgehog signaling

The temporomandibular joint (TMJ) is essential for jaw function, but the mechanisms regulating its development remain poorly understood. Because Indian hedgehog (Ihh) regulates trunk and limb skeletogenesis, we studied its possible roles in TMJ development. In wild-type mouse embryos, Ihh expression was already strong in condylar cartilage by embryonic day (E) 15.5, and expression of Ihh receptors and effector genes (Gli1, Gli2, Gli3, and PTHrP) indicated that Ihh range of action normally reached apical condylar tissue layers, including polymorphic chondroprogenitor layer and articular disc primordia. In Ihh(-/-) embryos, TMJ development was severely compromised. Condylar cartilage growth, polymorphic cell proliferation, and PTHrP expression were all inhibited, and growth plate organization and chondrocyte gene expression patterns were abnormal. These severe defects were partially corrected in double Ihh(-/-)/Gli3(-/-) mutants, signifying that Ihh action is normally modulated and delimited by Gli3 and Gli3(R) in particular. Both single and double mutants, however, failed to form an articular disc primordium, normally appreciable as an independent condensation between condylar apex and neighboring developing temporal bone in wild-type. This failure persisted at later stages, leading to complete absence of a normal functional disc and lubricin-expressing joint cavities. In summary, Ihh is very important for TMJ development, where it appears to regulate growth and elongation events, condylar cartilage phenotype, and chondroprogenitor cell function. Absence of articular disc and joint cavities in single and double mutants points to irreplaceable Ihh roles in formation of those critical TMJ components.

Effect of in ovo immobilization on development of chick hind-limb articular cartilage: An evaluation using micro-MRI measurement of delayed gadolinium uptake

To examine the effect of immobilization on the development of articular cartilage, we assessed glycosaminoglycan (GAG) content in the chick articular surface by delayed gadolinium-enhanced MRI of cartilage (dGEMRIC). Chick embryos were paralyzed by decamethonium bromide (DMB) from day 10 to either day 13 or day 16. The GAG content of the chick knee was compared with that of nonparalyzed chick embryos. Histologic analysis was unable to quantify GAG content; however, dGEMRIC demonstrated that GAG content was higher in the femoral condyles of the nonparalyzed embryos on day 13, and on day 16 the GAG content was lower in both the femoral condyles and the tibial plateaus of the nonparalyzed embryos. These results suggest that paralysis delays embryonic hind-limb development. Osteoblastic activity at the cartilage canal, as demonstrated by staining for alkaline phosphatase (ALP), was present only in the nonparalyzed chick embryos on day 16. The GAG content of the cartilage decreased when the cartilage canals began to form on day 16. The effect of immobilization on hind-limb development was indicated by the differences in the GAG content of the cartilage anlage measured by dGEMRIC in the developing knee joint of paralyzed and nonparalyzed embryonic chicks.

Mechanisms of synovial joint and articular cartilage formation: recent advances, but many lingering mysteries

Synovial joints are elegant, critically important, and deceptively simple biomechanical structures. They are comprised of articular cartilage that covers each end of the opposing skeletal elements, synovial fluid that lubricates and nourishes the tissues, ligaments that hold the skeletal elements in check, and a fibrous capsule that insulates the joints from surrounding tissues. Joints also exhibit an exquisite arrays of shapes and sizes, best exemplified by the nearly spherical convex femoral head articulating into a nearly spherical concave hip acetabulum, or a phalangeal joint with two condyles on the distal side articulating in reciprocally-shaped sockets on the opposing proximal side. Though few in number, joint tissues are highly specialized in structure and function. This is illustrated by articular cartilage with its unique extracellular matrix, unique biomechanical resilience, its largely avascular nature, and its ability to persist through life with minimal turnover of its cells and components. The fact that interest in synovial joints has remained unabated for decades is a reflection of their fundamental importance for organism function and quality of life, and for their susceptibility to a variety of acquired and congenital conditions, most importantly arthritis. This has led to many advances in this field that encompass molecular genetics to biomechanics to medicine. Regrettably, what continues to be poorly understood are the mechanisms by which synovial joints actually form in the developing embryo. If available, this information would be not only of indisputable biological interest, but would also have significant biomedical ramifications, particularly in terms of designing novel tissue regeneration or reconstruction therapies. This review focuses on recent advances in understanding the mechanisms of synovial joint formation in the limbs, and places and discusses the information within the context of classic studies and the many mysteries and questions that remain unanswered.

Mechanical signals regulating extracellular matrix gene expression in fibroblasts

Mechanical forces are essential for connective tissue homeostasis. The extracellular matrix (ECM) plays a key role in the transmission of forces generated by the organism (e.g. muscle contraction) and externally applied (e.g. gravity). The expression of specific ECM proteins such as collagens and tenascin-C, as well as of matrix metalloproteinases, involved in their turnover, is influenced by mechanical stimuli. The precise mechanisms by which mechanical strains are translated into chemical signals and lead to differential gene expression are however not fully understood. Cell-matrix adhesion sites are good candidates for hosting a "mechanosensory switch", as they transmit forces from the ECM to the cytoskeleton and vice versa by physically linking the cytoskeleton to the ECM. Integrins, transmembrane proteins located to these adhesion sites, have been shown to trigger a set of internal signaling cascades after mechanical stimulation. We have shown that the expression level of tenascin-C directly correlates with externally applied mechanical stress, as well as with RhoA/RhoA-dependent kinase-mediated cytoskeletal tension. Presumably other genes are regulated in a similar manner. The changes in ECM composition and mechanical properties derived from mechanical stress are relevant in medical intervention after ligament and tendon injury.

Induction of tenascin-C by cyclic tensile strain versus growth factors: distinct contributions by Rho/ROCK and MAPK signaling pathways

Expression of the extracellular matrix (ECM) protein tenascin-C is induced in fibroblasts by growth factors as well as by tensile strain. Mechanical stress can act on gene regulation directly, or indirectly via the paracrine release of soluble factors by the stimulated cells. To distinguish between these possibilities for tenascin-C, we asked whether cyclic tensile strain and soluble factors, respectively, induced its mRNA via related or separate mechanisms. When cyclic strain was applied to chick embryo fibroblasts cultured on silicone membranes, tenascin-C mRNA and protein levels were increased twofold within 6 h compared to the resting control. Medium conditioned by strained cells did not stimulate tenascin-C mRNA in resting cells. Tenascin-C mRNA in resting cells was increased by serum; however, cyclic strain still caused an additional induction. Likewise, the effect of TGF-beta1 or PDGF-BB was additive to that of cyclic strain, whereas IL-4 or H2O2 (a reactive oxygen species, ROS) did not change tenascin-C mRNA levels. Antagonists for distinct mitogen-activated protein kinases (MAPK) inhibited tenascin-C induction by TGF-beta1 and PDGF-BB, but not by cyclic strain. Conversely, a specific inhibitor of Rho-dependent kinase strongly attenuated the response of tenascin-C mRNA to cyclic strain, but had limited effect on induction by growth factors. The data suggest that regulation of tenascin-C in fibroblasts by cyclic strain occurs independently from soluble mediators and MAPK pathways; however, it requires Rho/ROCK signaling.

Tenascins: regulation and putative functions during pathological stress

In this review, we discuss the structure and function of the extracellular matrix protein family of tenascins with emphasis on their involvement in human pathologies. The article is divided into the following sections:

INTRODUCTION

the tenascin family of extracellular matrix proteins; Structural roles: tenascin-X deficiency and Ehlers-Danlos syndrome; Tenascins as modulators of cell adhesion, migration, and growth; Role of tenascin-C in inflammation; Regulation of tenascins by mechanical stress: implications for wound healing and regeneration; Association of tenascin-C with cancer: antibodies as diagnostic and therapeutic tools; Conclusion and perspectives.

Mechanical loading regulates the expression of tenascin-C in the myotendinous junction and tendon but does not induce de novo synthesis in the skeletal muscle

Tenascin-C is a hexabrachion-shaped matricellular protein with a very restricted expression in normal musculoskeletal tissues, but it is expressed abundantly during regenerative processes of these tissues and embryogenesis. To examine the importance of mechanical stress for the regulation of tenascin-C expression in the muscle-tendon unit, the effects of various states of mechanical loading (inactivity by cast-immobilization and three-varying intensities of subsequent re-activity by treadmill running) on the expression of tenascin-C were studied using immunohistochemistry and mRNA in situ hybridization at the different locations of the muscle-tendon unit of the rat gastrocnemius muscle, the Achilles tendon complex. This muscle-tendon unit was selected as the study site, because the contracting activity of the gastrocnemius-soleus muscle complex, and thus the mechanical loading-induced stimulation, is easy to block by cast immobilization. Tenascin-C was expressed abundantly in the normal myotendinous and myofascial junctions, as well as around the cells and the collagen fibers of the Achilles tendon. Tenascin-C expression was not found in the normal skeletal muscle, although it was found in blood vessels within the muscle tissue. Following the removal of the mechanical loading-induced stimulation on the muscle-tendon unit by cast immobilization for 3 weeks, the immonoreactivity of tenascin-C substantially decreased or was completely absent in the regions expressing tenascin-C normally. Restitution of the mechanical loading by removing the cast and allowing free cage activity for 8 weeks resulted in an increase in tenascin-C expression, but it could not restore the expression of tenascin-C to the normal level (in healthy contralateral leg). In response to the application of a more strenuous mechanical loading stimulus after the removal of the cast (after 8 weeks of low- and high-intensity treadmill running), the expression of tenascin-C was markedly increased and reached the level seen in the healthy contralateral limb. Tenascin-C was abundantly expressed in myotendinous and myofascial junctions and in the Achilles tendon, but even the most strenuous mechanical loading (high-intensity treadmill running) could not induce the expression of tenascin-C in the skeletal muscle. This was in spite of the marked immobilization-induced atrophy of the previously immobilized skeletal muscle, which had been subjected to intensive stress during remobilization. mRNA in situ hybridization analysis confirmed the immunohistochemical results for the expression of tenascin-C in the study groups. In summary, this study shows that mechanical loading regulates the expression of tenascin-C in an apparently dose-dependent fashion at sites of the muscle-tendon unit normally expressing tenascin-C but can not induce de novo synthesis of tenascin-C in the skeletal muscle without accompanying injury to the tissue. Our results suggest that tenascin-C provides elasticity in mesenchymal tissues subjected to heavy tensile loading.

How do fibroblasts translate mechanical signals into changes in extracellular matrix production?

Mechanical forces are important regulators of connective tissue homeostasis. Our recent experiments in vivo indicate that externally applied mechanical load can lead to the rapid and sequential induction of distinct extracellular matrix (ECM) components in fibroblasts, rather than to a generalized hypertrophic response. Thus, ECM composition seems to be adapted specifically to changes in load. Mechanical stress can regulate the production of ECM proteins indirectly, by stimulating the release of a paracrine growth factor, or directly, by triggering an intracellular signalling pathway that activates the gene. We have evidence that tenascin-C is an ECM component directly regulated by mechanical stress: induction of its mRNA in stretched fibroblasts is rapid both in vivo and in vitro, does not depend on prior protein synthesis, and is not mediated by factors released into the medium. Fibroblasts sense force-induced deformations (strains) in their ECM. Findings by other researchers indicate that integrins within cell-matrix adhesions can act as 'strain gauges', triggering MAPK and NF-kappaB pathways in response to changes in mechanical stress. Our results indicate that cytoskeletal 'pre-stress' is important for mechanotransduction to work: relaxation of the cytoskeleton (e.g. by inhibiting Rho-dependent kinase) suppresses induction of the tenascin-C gene by cyclic stretch, and hence desensitizes the fibroblasts to mechanical signals. On the level of the ECM genes, we identified related enhancer sequences that respond to static stretch in both the tenascin-C and the collagen XII promoter. In the case of the tenascin-C gene, different promoter elements might be involved in induction by cyclic stretch. Thus, different mechanical signals seem to regulate distinct ECM genes in complex ways.

Mechanobiology of force transduction in dermal tissue

BACKGROUND/AIMS

The influence of mechanical forces on skin has been examined since 1861 when Langer first reported the existence of lines of tension in cadaver skin. Internal tension in the dermis is not only passively transferred to the epidermis but also gives rise to active cell-extracellular matrix and cell-cell mechanical interactions that may be an important part of the homeostatic processes that are involved in normal skin metabolism. The purpose of this review is to analyse how internal and external mechanical loads are applied at the macromolecular and cellular levels in the epidermis and dermis.

METHODS

A review of the literature suggests that internal and external forces applied to dermal cells appear to be involved in mechanochemical transduction processes involving both cell-cell and cell-extra-cellular matrix (ECM) interactions. Internal forces present in dermis are the result of passive tension that is incorporated into the collagen fiber network during development. Active tension generated by fibroblasts involves specific interactions between cell membrane integrins and macromolecules found in the ECM, especially collagen fibrils. Forces appear to be transduced at the cell-ECM interface via re-arrangement of cytoskeletal elements, activation of stretch-induced changes in ion channels, cell contraction at adherens junctions, activation of cell membrane-associated secondary messenger pathways and through growth factor-like activities that influence cellular proliferation and protein synthesis.

CONCLUSIONS

Internal and external mechanical loading appears to affect skin biology through mechanochemical transduction processes. Further studies are needed to understand how mechanical forces, energy storage and conversion of mechanical energy into changes in chemical potential of small and large macromolecules may occur and influence the metabolism of dermal cells.

Developmental distribution of collagen type XII in cartilage: association with articular cartilage and the growth plate

Collagen type XII is a member of the fibril-associated collagens and is characterized by a short triple-helical domain with three extended noncollagenous NC3 domains. Previous studies suggested that collagen XII is a component of cartilage but little is known about its spatial-temporal distribution. This study uses a polyclonal antibody to the purified NC3 domain to investigate its developmental distribution in rat forelimb. Collagen XII was present at the joint interzone on embryonic day 16 (E16d) and restricted to the presumptive articular cartilage by E18d. Labeling of the articular surface intensified as development progressed postnatally (day 1 [1d] to 28d) and extended approximately six cell diameters deep. In juvenile rats, collagen XII antibodies also labeled the longitudinal and transverse septa of stacked chondrocytes in the growth plate. However, collagen XII was not associated at any developmental stage with the cartilaginous secondary ossification center and was only weakly expressed in epiphyseal cartilage. Ultrastructural localization of the NC3 domain epitope showed labeling of the surface of collagen II fibrils both in tissue and in isolated fibrils. The results presented provide further evidence that articular cartilage differs substantially from the underlying epiphyseal cartilage and that different chondrocytic developmental fates are reflected in the composition of their extracellular matrix starting early in development. In addition, collagen XII was distributed in areas of cartilage with more organized fibril orientation and may have a role in promoting alignment or stabilizing such an organization, thereby creating a matrix capable of withstanding load-bearing forces.