A potential approach for decreasing the burst effect of protein from PLGA microspheres

Antibody desolvation with sodium chloride and acetonitrile generates bioactive protein nanoparticles

About 30% of the FDA approved drugs in 2021 were protein-based therapeutics. However, therapeutic proteins can be unstable and rapidly eliminated from the blood, compared to conventional drugs. Furthermore, on-target but off-tumor protein binding can lead to off-tumor toxicity, lowering the maximum tolerated dose. Thus, for effective treatment therapeutic proteins often require continuous or frequent administration. To improve protein stability, delivery and release, proteins can be encapsulated inside drug delivery systems. These drug delivery systems protect the protein from degradation during (targeted) transport, prevent premature release and allow for long-term, sustained release. However, thus far achieving high protein loading in drug delivery systems remains challenging. Here, the use of protein desolvation with acetonitrile as an intermediate step to concentrate monoclonal antibodies for use in drug delivery systems is reported. Specifically, trastuzumab, daratumumab and atezolizumab were desolvated with high yield (∼90%) into protein nanoparticles below 100 nm with a low polydispersity index (<0.2). Their size could be controlled by the addition of low concentrations of sodium chloride between 0.5 and 2 mM. Protein particles could be redissolved in aqueous solutions and redissolved antibodies retained their binding activity as evaluated in cell binding assays and exemplified for trastuzumab in an ELISA.

Population pharmacokinetics of rotigotine extended-release microspheres for intramuscular injection in patients with early-stage Parkinson's disease

AIMS

Rotigotine extended-release microspheres is a weekly intramuscular injection formulation to treat Parkinson's disease. This study aimed to develop a population pharmacokinetics (PK) model for rotigotine extended-release microspheres to investigate its PK ethnic differences.

METHODS

Data for the study were obtained from three studies in China, Japan and the US. The population PK model was developed using the Phoenix NLME 8.3.5 software. Two parallel absorption models were created to include both zero- and first-order absorptions. The elimination phase was evaluated for one- and two-compartment linear models. Moreover, covariates including sex, body weight, body mass index, albumin, creatinine clearance and race were input into the model using a stepwise covariate method.

RESULTS

We constructed a one-compartment linear model with the first parallel absorption model identified as the best-fitting model. Simulation results in patients with lighter body weight (45 kg) exhibited a 27% increase in Cmax,ss and a 31% increase in AUCtau,ss compared to those with median body weight (65 kg). Patients with heavier body weight (103 kg) showed a 27% decrease in Cmax,ss and a 29% decrease in AUCtau,ss compared to the median body weight group. Asian patients displayed only a 21% increase in Cmax,ss and a 6% increase in AUCtau,ss compared to non-Asian. While we could not fully conclude that race does not affect rotigotine exposure, dosage adjustments based on race were not deemed necessary.

CONCLUSIONS

Exposure differences were mainly attributed to body weight, while dose adjustments were not needed for patients of different racial identities.

The Modified Exenatide Microspheres: PLGA-PEG-PLGA Gel and Zinc-Exenatide Complex Synergistically Reduce Burst Release and Shorten Platform Stage

The existing exenatide microspheres have the problem of burst release in the early stage, and minimal release in the middle stage which makes it difficult to achieve effective blood drug concentration (platform period). In this study, the modified exenatide microspheres were constructed to address the aforementioned issues. Poly(D,L-lactic-co-glycolic acid) (PLGA) and triblock copolymer with sol-gel conversion characteristics (PLGA-PEG-PLGA gel) were introduced as carriers to prepare microspheres. The hot gel characteristics and hydrophilicity of PLGA-PEG-PLGA gel were utilized to decline the burst release and shorten the platform period. Simultaneously, zinc acetate and exenatide were combined to generate an insoluble complex to further reduce the burst release. Herein, we prepared three types of exenatide microspheres using the solvent evaporation method and investigated their characterization as well as in vitro and in vivo release. According to the experimental findings, the modified exenatide microspheres, i.e., PLGA-PEG-PLGA gel and PLGA co-loaded zinc-exenatide insoluble complex microspheres (Zn-EXT-Gel-MS), had smooth and rounded surfaces, with a particle size of 24.7 μm, and the encapsulation rate reached 89.43%. And it was released for 40 days in vitro, behaving better than the other two microspheres in terms of release behavior. When this product was administered subcutaneously to rats, it produced a comparatively constant plasma exenatide concentration that lasted for 24 days and superior bioavailability than the exenatide microspheres (EXT-MS). The creation of modified exenatide microspheres may serve as a heuristic method for other long-acting medications. Schematic diagram of the synthesis process and release curves of three types of exenatide microspheres in vitro and in vivo.

Oral Microalgae-Nano Integrated System against Radiation-Induced Injury

The increasing applications of ionizing radiation in society raise the risk of radiation-induced intestinal and whole-body injury. Astaxanthin is a powerful antioxidant to reduce the reactive oxygen generated from radiation and the subsequent damage. However, the oral administration of astaxanthin remains challenging owing to its low solubility and poor bioavailability. Herein, we facilely construct an orally used microalgae-nano integrated system (SP@ASXnano) against radiation-induced intestinal and whole-body injury, combining natural microalgae Spirulina platensis (SP) with astaxanthin nanoparticles (ASXnano). SP and ASXnano show complementation in drug delivery to improve distribution in the intestine and blood. SP displays limited gastric drug loss, prolonged intestinal retention, constant ASXnano release, and progressive degradation. ASXnano improves drug solubility, gastric stability, cell uptake, and intestinal absorption. SP and ASXnano have synergy in many aspects such as anti-inflammation, microbiota protection, and fecal short-chain fatty acid up-regulation. In addition, the system is ensured with biosafety for long-term administration. The system organically combines the properties of microalgae and nanoparticles, which was expected to expand the medical application of SP as a versatile drug delivery platform.

Understanding HIV-associated neurocognitive and neurodegenerative disorders (neuroAIDS): enroute to achieve the 95-95-95 target and sustainable development goal for HIV/AIDS response

The world's sustained commitment to the HIV/AIDS response and to reaching the 2030 Sustainable Development Goal (SDG) of "ending AIDS" as a public health issue is indicated by the ambitious 95-95-95 targets for all relevant populations. Neurological conditions of AIDS (neuroAIDS) are the most significant and severe central nervous system complication associated with HIV infection in which viral antigens can enter in the brain by breaching the blood brain barrier and cause dementia, neuroinflammation and encephalopathy. The prevalence of neuroAIDS is 10-50% in people with advanced HIV disease, whereas 5-25% in people on ART. Currently, MRI, CT and other tools are used to diagnose the neuroAIDS/ HIV-associated dementia and antiretroviral therapy is widely used to treat the neuroAIDS. In spite of many advanced tools and pathogenesis of neuroAIDS, developing therapeutics remains a formidable challenge. Long acting cabotegravir type of therapeutics is an advanced stage of research which shows good results for the treatment of neuroAIDS. Therefore, here we are discussing the recent insights of the pathogenesis, possible therapeutics and current strategies and treatment to overcome the neuroAIDS.

Oral lymphatic delivery of alpha-galactosylceramide and ovalbumin evokes anti-cancer immunization

We developed an orally delivered nanoemulsion that induces cancer immunization. It consists of tumor antigen-loaded nano-vesicles carrying the potent invariant natural killer T-cell (iNKT) activator α-galactosylceramide (α-GalCer), to trigger cancer immunity by effectively activating both innate and adaptive immunity. It was validated that adding bile salts to the system boosted intestinal lymphatic transport as well as the oral bioavailability of ovalbumin (OVA) via the chylomicron pathway. To increase intestinal permeability further and amplify the antitumor responses, an ionic complex of cationic lipid 1,2-dioleyl-3-trimethylammonium propane (DTP) with sodium deoxycholate (DA) (DDP) and α-GalCer were anchored onto the outer oil layer to form OVA-NE#3. As expected, OVA-NE#3 exhibited tremendously improved intestinal cell permeability as well as enhanced delivery to mesenteric lymph nodes (MLNs). Subsequent activation of dendritic cells and iNKTs, in MLNs were also observed. Tumor growth in OVA-expressing mice with melanoma was more strongly suppressed (by 71%) after oral administration of OVA-NE#3 than in untreated controls, confirming the strong immune response induced by the system. The serum levels of OVA-specific IgG1 and IgG2a were 3.52- and 6.14-fold higher than in controls. Treating OVA-NE#3 increased the numbers of tumor-infiltrating lymphocytes, including cytotoxic T-cell and M1-like macrophage. Antigen- and α-GalCer-associated enrichment of dendritic cells and iNKTs in tumor tissues also increased after OVA-NE#3 treatment. These observations indicate that our system induces both cellular and humoral immunity by targeting the oral lymphatic system. It may offer a promising oral anti-cancer vaccination strategy that involves the induction of systemic anti-cancer immunization.

Controlled Covalent Self-Assembly of a Homopolymer for Multiscale Materials Engineering

Polymer self-assembly is a crucial process in materials engineering. Currently, almost all polymer self-assembly is limited to non-covalent bonding methods, even though these methods have drawbacks as they require complicated synthesis techniques and produce relatively unstable structures. Here, a novel mechanism of covalent polymer self-assembly is discovered and employed to address drawbacks of non-covalent polymer self-assembly. A simple ketone homopolymer is found to self-assemble into nano- to macroscale hydrogels during covalent crosslinking. In contrast to non-covalent self-assembly, the covalent self-assembly is independent of and unaffected by solvent conditions (e.g., polarity and ionic strength) and does not require additional agents, e.g., organic solvents and surfactants. The covalent polymer self-assembly is subjected to a new mechanism of control by tuning the covalent crosslinking rate. This leads to nanogels with an unprecedented and tightly controlled range of dimensions from less than 10 nm to above 100 nm. Moreover, the crosslinking rate also regulates the assembly behavior of microgels fabricated by microfluidics. The microgels self-assemble into granular fibers, which is 3D printed into stable porous scaffolds. The novel covalent polymer assembly method has enormous potential to revolutionize multiscale materials fabrication for applications in drug delivery, tissue engineering, and many other fields.

Simultaneous loading of (-)-epigallocatechin gallate and ferulic acid in chitosan-based nanoparticles as effective antioxidant and potential skin-whitening agents

Chitosan (CS) based nanoparticles simultaneously loaded with (-)-epigallocatechin gallate (EGCG) and ferulic acid (FA) were fabricated via ionic gelation method modified by sodium tripolyphosphate and genipin (G-CS-EGCG-FA NPs). The particle size, morphology, entrapment efficiency, rheological properties, antioxidant and tyrosinase inhibitory activity of NPs were investigated. The G-CS-EGCG-FA NPs exhibited irregular ellipsoidal shape with average diameter of 412.3 nm and high DPPH and ABTS·⁺ scavenging ability. The entrapment efficiency of EGCG and FA in NPs was 46.0 ± 1.3 % and 46.8 ± 1.6 %, respectively. CS-based NPs show no toxic effects on NIH 3 T3 cells and B16-F10 melanoma cells with concentration <200 μg/mL and 25 μg/mL, respectively and the cell viability ranged from 100 % to 118 %. Meanwhile, the oxidative repaired capacity of G-CS-EGCG-FA NPs (200 μg/mL) in H₂O₂-induced cells was over 100 %, higher than that of the same dose of free EGCG or FA. Moreover, the tyrosinase inhibition activity of G-CS-EGCG-FA NPs (25 μg/mL) (84.6 %) was more potent than that of free EGCG (55.3 %), free FA (47.1 %) and kojic acid, indicating the good skin repairing and whitening ability of G-CS-EGCG-FA NPs. Given these results, this research provides new insights for designing novel particles loaded with dual bioactive agents that possess synergistic benefits.

The impact of calcium phosphate on FITC-BSA loading of sonochemically prepared PLGA nanoparticles for inner ear drug delivery elucidated by two different fluorimetric quantification methods

Although therapeutically active proteins are highly efficacious, their content in protective nanoparticles is often too low to elicit adequate plasma levels. A strategy to increase protein loading is the in-situ generation of calcium phosphate as a protein adsorbent. To verify this approach, a highly sensitive and reliable fluorimetric method for quantification of incorporated fluorescein-labelled bovine serum albumin (FITC-BSA) as a model protein drug was developed. Dequenching the fluorescein label by pronase E, which digests the protein backbone, and dissolving the nanoparticle matrix in acetonitrile enabled FITC-BSA quantification in the nanogram per milliliter range. This test was confirmed by a second assay involving alkaline hydrolysis of FITC-BSA and the matrix. Nanoparticles prepared with calcium phosphate contained 40 µg FITC-BSA/mg and nanoparticles without calcium phosphate only 15 µg FITC-BSA/mg, representing a 2.7-fold increase in model protein loading. In this work the nanoparticle preparation procedure was optimized in terms of size for administration in the inner ear, but the range of applications is not limited.

Lung-Targeting Lysostaphin Microspheres for Methicillin-Resistant Staphylococcus aureus Pneumonia Treatment and Prevention

Multifunctional antimicrobial strategies are urgently needed to treat methicillin-resistant Staphylococcus aureus (MRSA) caused pneumonia due to its increasing resistance, enhanced virulence, and high pathogenicity. Here, we report that lysostaphin, a bacteriolytic enzyme, encapsulated within poly(lactic-co-glycolic acid) microspheres (LyIR@MS) specially treats planktonic MRSA bacteria, mature biofilms, and related pneumonia. Optimized LyIR@MS with suitable diameters could deliver a sufficient amount of lysostaphin to the lung without a decrease in survival rate after intravenous injection. Furthermore, the degradable properties of the carrier make it safe for targeted release of lysostaphin to eliminate MRSA, repressing the expression of virulence genes and improving the sensitivity of biofilms to host neutrophils. In the MRSA pneumonia mouse model, treatment or prophylaxis with LyIR@MS significantly improved survival rate and relieved inflammatory injury without introducing adverse events. These findings suggest the clinical translational potential of LyIR@MS for the treatment of MRSA-infected lung diseases.

One-step preparation of photoclick method for embolic microsphere synthesis and assessment for transcatheter arterial embolization

Vascular embolization is a well-known therapeutic treatment against hepatocellular carcinoma. However, existing embolic agents require complex synthesis, toxic organic solvents and sometimes produce only low yields. In this study, a novel photopolymerization technique, which addresses these issues, was used to prepare embolic microspheres successfully from the sucrose multi-allyl ether monomer in one step. Compared to the preparation of such microspheres always involved in multiple steps or complicated conditions, we obtained the microspheres used photoclick method in a soft template with simple, economic and feasible procedure. This work focuses on the synthesis of new materials by conducting a photopolymerzation in the presence of the sucrose monomer and the photoinitiator. Then, the embolic microspheres obtained were characterized by morphology assay, degradation, and swelling test. Cell experiments showed that the microspheres had good biocompatibility. Rabbit embolizations showed that the microspheres had long-term embolic effects. It is manifested that one-step preparation of photoclick method hold great potential and competitiveness of being used in preparation embolic microspheres in clinic.

Technological Approaches for Improving Vaccination Compliance and Coverage

Vaccination has been well recognised as a critically important tool in preventing infectious disease, yet incomplete immunisation coverage remains a major obstacle to achieving disease control and eradication. As medical products for global access, vaccines need to be safe, effective and inexpensive. In line with these goals, continuous improvements of vaccine delivery strategies are necessary to achieve the full potential of immunisation. Novel technologies related to vaccine delivery and route of administration, use of advanced adjuvants and controlled antigen release (single-dose immunisation) approaches are expected to contribute to improved coverage and patient compliance. This review discusses the application of micro- and nano-technologies in the alternative routes of vaccine administration (mucosal and cutaneous vaccination), oral vaccine delivery as well as vaccine encapsulation with the aim of controlled antigen release for single-dose vaccination.

Hydrophobic ion pairing: encapsulating small molecules, peptides, and proteins into nanocarriers

Hydrophobic ion pairing has emerged as a method to modulate the solubility of charged hydrophilic molecules ranging in class from small molecules to large enzymes. Charged hydrophilic molecules are ionically paired with oppositely-charged molecules that include hydrophobic moieties; the resulting uncharged complex is water-insoluble and will precipitate in aqueous media. Here we review one of the most prominent applications of hydrophobic ion pairing: efficient encapsulation of charged hydrophilic molecules into nano-scale delivery vehicles - nanoparticles or nanocarriers. Hydrophobic complexes are formed and then encapsulated using techniques developed for poorly-water-soluble therapeutics. With this approach, researchers have reported encapsulation efficiencies up to 100% and drug loadings up to 30%. This review covers the fundamentals of hydrophobic ion pairing, including nomenclature, drug eligibility for the technique, commonly-used counterions, and drug release of encapsulated ion paired complexes. We then focus on nanoformulation techniques used in concert with hydrophobic ion pairing and note strengths and weaknesses specific to each. The penultimate section bridges hydrophobic ion pairing with the related fields of polyelectrolyte coacervation and polyelectrolyte-surfactant complexation. We then discuss the state of the art and anticipated future challenges. The review ends with comprehensive tables of reported hydrophobic ion pairing and encapsulation from the literature.

Using co-axial electrospray deposition to eliminate burst release of simvastatin from microparticles and to enhance induced osteogenesis

Microparticles (MPs) exhibit fast dissolution, characterized by a burst drug release pattern. In the present work, we prepared core-shell MPs of simvastatin (SIM) and zein with chitosan (CS) and nano-hydroxyapatite (nHA) as a drug carrier using the coaxial electrospray deposition method. The morphology, formation and in vitro osteogenic differentiation of these MPs were studied. The synthetic MPs have a diameter of about 1 μm and they are composed of non-toxic natural materials. They provide an effective way to enable long-term sustained-release activity, which is controlled by their double layer structures. The CS-nHA/zein-SIM MPs presented a low initial burst release (approximately 35-47%) within the first 24 h of application followed by the sustained release for at least 4 weeks. In vitro cell culture experiments were performed and the results revealed that the CS-nHA/zein-SIM core-shell MPs were beneficial to the adhesion, proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The CS-nHA/zein-SIM MPs with a low SIM concentration were beneficial to cell proliferation and promotion of osteogenic differentiation.

Long-Acting Release Microspheres Containing Novel GLP-1 Analog as an Antidiabetic System

Glucagon-like peptide 1 (GLP-1) has recently received significant attention as an efficacious way to treat diabetes mellitus. However, the short half-life of the peptide limits its clinical application in diabetes. In our previous study, a novel GLP-1 analog (PGLP-1) with a longer half-life was synthesized and evaluated. Herein, we prepared the PGLP-1-loaded poly(d,l-lactide- co-glycolide) microspheres to achieve long-term effects on blood glucose control. The incorporation of zinc ion into the formulation can effectively decrease the initial burst release, and a uniform drug distribution was obtained, in contrast to native PGLP-1 encapsulated microspheres. We demonstrated that the solubility of the drug encapsulated in microspheres played an important role in in vitro release behavior and drug distribution inside the microspheres. The Zn-PGLP-1 microspheres had a prominent acute glucose reduction effect in the healthy mice. A hypoglycemic effect was observed in the streptozotocin (STZ) induced diabetic mice through a 6-week treatment of Zn-PGLP-1-loaded microspheres. Meanwhile, the administration of Zn-PGLP-1 microspheres led to the β-cell protection and stimulation of insulin secretion. The novel GLP-1 analog-loaded sustained microspheres may greatly improve patient compliance along with a desirable safety feature.

Soybean Lecithin-Mediated Nanoporous PLGA Microspheres with Highly Entrapped and Controlled Released BMP-2 as a Stem Cell Platform

Injectable polymer microsphere-based stem cell delivery systems have a severe problem that they do not offer a desirable environment for stem cell adhesion, proliferation, and differentiation because it is difficult to entrap a large number of hydrophilic functional protein molecules into the core of hydrophobic polymer microspheres. In this work, soybean lecithin (SL) is applied to entrap hydrophilic bone morphogenic protein-2 (BMP-2) into nanoporous poly(lactide-co-glycolide) (PLGA)-based microspheres by a two-step method: SL/BMP-2 complexes preparation and PLGA/SL/BMP-2 microsphere preparation. The measurements of their physicochemical properties show that PLGA/SL/BMP-2 microspheres had significantly higher BMP-2 entrapment efficiency and controlled triphasic BMP-2 release behavior compared with PLGA/BMP-2 microspheres. Furthermore, the in vitro and in vivo stem cell behaviors on PLGA/SL/BMP-2 microspheres are analyzed. Compared with PLGA/BMP-2 microspheres, PLGA/SL/BMP-2 microspheres have significantly higher in vitro and in vivo stem cell attachment, proliferation, differentiation, and matrix mineralization abilities. Therefore, injectable nanoporous PLGA/SL/BMP-2 microspheres can be potentially used as a stem cell platform for bone tissue regeneration. In addition, SL can be potentially used to prepare hydrophilic protein-loaded hydrophobic polymer microspheres with highly entrapped and controlled release of proteins.

Preparation of particulate polymeric therapeutics for medical applications

Particulate therapeutics fabricated from polymeric materials have become increasingly popular over the past several decades. Generally, polymeric systems are easy to synthesize and have tunable parameters, giving them significant potential for wide use in the clinic. They come in many different forms, including as nanoparticles, microparticles, and colloidal gels. In this review, we discuss the current preparation methods for each type of platform, as well as some representative applications. To achieve enhanced performance, lipid coatings and other surface modification techniques for introducing additional functionality are also mentioned. We hope that, by outlining the various methods and techniques for their preparation, it will be possible to provide insights into the utility of these polymeric platforms and further encourage their development for biomedical applications.

Immunogenicity of pulsatile-release PLGA microspheres for single-injection vaccination

The World Health Organization's Expanded Programme on Immunization has led to a dramatic rise in worldwide vaccination rates over the past 40 years, yet 19.4 million infants remain underimmunized each year. Many of these infants have received at least one vaccine dose but may remain unprotected because they did not receive subsequent booster doses due to logistical challenges. This study aimed to develop injectable controlled release microparticles with kinetics that mimic common vaccine dosing regimens consisting of large antigen doses administered periodically over the course of months in order to eliminate the need for boosters. Sixteen poly(lactic-co-glycolic acid) (PLGA) microsphere formulations containing bovine serum albumin (BSA) as a model vaccine antigen were screened in vitro to determine their respective release kinetics. Three formulations that exhibited desirable pulsatile release profiles were then selected for studying immunogenicity in mice. Two low-dose microsphere formulations induced peak anti-BSA IgG antibody titers of 13.9 ± 1.3 and 13.7 ± 2.2 log₂ compared to 15.5 ± 1.5 log₂ for a series of three bolus injections delivered at 0, 4, and 8 weeks with an equivalent cumulative dose. Similarly, high-dose formulations induced peak antibody titers that were 16.1 ± 2.1 log₂ compared to 17.7 ± 2.2 log₂ for controls. All three microparticle formulations studied in vivo induced peak antibody titers that were statistically similar to bolus controls. These results suggest that pulsatile antigen release from polymeric microparticles is a promising approach for single-injection vaccination, which could potentially reduce the logistical burden associated with immunization in the developing world.

Drug release profile and reduction in the in vitro burst release from pectin/HEMA hydrogel nanocomposites crosslinked with titania

Hydrogel nanocomposites of pectin, HEMA and titania for Vit-B₁₂ controlled release with reduced initial release burst were prepared. A reduction of up to ca. 60% was observed.

Activation of Antigen-Specific CD8(+) T Cells by Poly-DL-Lactide/Glycolide (PLGA) Nanoparticle-Primed Gr-1(high) Cells

PURPOSE

The aim of this study was to investigate the induction of antigen-specific T cell activation and cell cycle modulation by a poly-DL-lactide/glycolide (PLGA) nanoparticle (NP)-primed CD11b(+)Gr-1(high) subset isolated from mouse bone marrow.

METHODS

PLGA NPs containing the ovalbumin (OVA) antigen were prepared using the double emulsion and solvent evaporation method, and protein release rate and cell viability were determined. The Lin2(¯)CD11b(+)Gr-1(high)Ly6c(low) (Gr-1(high)) subset was sorted from the bone marrow of C57BL/6 J mice by fluorescence-activated cell sorting (FACS) and co-cultured with OT-I CD8(+) splenic T cells. Proliferation of OT-I CD8(+) T cells was monitored, and cell cycles were determined by 5-bromo-2'-deoxyuridine (BrdU) labeling.

RESULTS

Treatment of Gr-1(high) cells with PLGA/OVA NPs upregulated expression of the SIINFEKL-H2K(b) complex in the context of MHC I. Co-cultures of OT-I CD8(+) T cells with the PLGA/OVA NP-primed Gr-1(high) cells induced the proliferation of T cells in vitro and modulated cell division and morphology. Treatment of Gr-1(high) cells with PLGA/OVA NPs also induced cell apoptosis and necrosis.

CONCLUSION

This study demonstrated the function of PLGA/OVA NPs in the activation of OT-I CD8(+) T cells and the capability of cross-presentation via the Gr-1(high) polymorphonuclear subset from mouse bone marrow.

Quantitative three-dimensional analysis of poly (lactic-co-glycolic acid) microsphere using hard X-ray nano-tomography revealed correlation between structural parameters and drug burst release

The objective of this study was to investigate the use of transmission hard X-ray nano-computed-tomography (nano-CT) for characterization of the pore structure and drug distribution in poly (lactic-co-glycolic acid) (PLGA) microspheres encapsulating bovine serum albumin and to study the correlation between drug distribution and burst release. The PLGA microspheres were fabricated using a double-emulsion method. The results of pore structure analysis accessed with nano-CT were compared with those acquired by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). Surface pore interconnectivity and surface protein interconnectivity were obtained using combined nano-CT and pixel analysis. The correlation between surface protein interconnectivity with the initial burst release across various tested formulations was also analyzed. The size, shape, and distribution of the pores and protein could be clearly observed in the whole microsphere using nano-CT, whereas only the sectional information was observed using SEM or CLSM. Interconnected pores and surface connected pores could be clearly distinguished in nano-CT, which enables the quantitative analysis of surface pore interconnectivity and surface protein interconnectivity. The surface protein interconnectivity in different formulations correlated well with the burst release at 5-10h. Nano-CT provided a nondestructive, high-resolution, and three-dimensional analysis method to characterize the porous microsphere.

Injectable controlled release depots for large molecules

Biodegradable, injectable depot formulations for long-term controlled drug release have improved therapy for a number of drug molecules and led to over a dozen highly successful pharmaceutical products. Until now, success has been limited to several small molecules and peptides, although remarkable improvements have been accomplished in some of these cases. For example, twice-a-year depot injections with leuprolide are available compared to the once-a-day injection of the solution dosage form. Injectable depots are typically prepared by encapsulation of the drug in poly(lactic-co-glycolic acid) (PLGA), a polymer that is used in children every day as a resorbable suture material, and therefore, highly biocompatible. PLGAs remain today as one of the few "real world" biodegradable synthetic biomaterials used in US FDA-approved parenteral long-acting-release (LAR) products. Despite their success, there remain critical barriers to the more widespread use of PLGA LARproducts, particularly for delivery of more peptides and other large molecular drugs, namely proteins. In this review, we describe key concepts in the development of injectable PLGA controlled-release depots for peptides and proteins, and then use this information to identify key issues impeding greater widespread use of PLGA depots for this class of drugs. Finally, we examine important approaches, particularly those developed in our research laboratory, toward overcoming these barriers to advance commercial LAR development.

Polymer blend particles with defined compositions for targeting antigen to both class I and II antigen presentation pathways

Defense against many persistent and difficult-to-treat diseases requires a combination of humoral, CD4(+) , and CD8(+) T-cell responses, which necessitates targeting antigens to both class I and II antigen presentation pathways. In this study, polymer blend particles are developed by mixing two functionally unique polymers, poly(lactide-co-glycolide) (PLGA) and a pH-responsive polymer, poly(dimethylaminoethyl methacrylate-co-propylacrylic acid-co-butyl methacrylate) (DMAEMA-co-PAA-co-BMA). Polymer blend particles are shown to enable the delivery of antigens into both class I and II antigen presentation pathways in vitro. Increasing the ratio of the pH-responsive polymer in blend particles increases the degree of class I antigen presentation, while maintaining high levels of class II antigen presentation. In a mouse model, it is demonstrated that a significantly higher and sustained level of CD4(+) and CD8(+) T-cell responses, and comparable antibody responses, are elicited with polymer blend particles than PLGA particles and a conventional vaccine, Alum. The polymer blend particles offer a potential vaccine delivery platform to generate a combination of humoral and cell-mediated immune responses that insure robust and long-lasting immunity against many infectious diseases and cancers.

Manganese graft ionomer complexes (MaGICs) for dual imaging and chemotherapy

Novel manganese graft ionomer complexes (MaGICs) that contain Mn ions complexed with a polyaminobisphosphonate-g-poly(ethylene oxide) (PEO) copolymer were developed for use as T₁-weighted contrast agents for MRI. The complexes exhibited good colloidal stability without release of free manganese and did not result in any in vitro toxicity against mouse hepatocytes. T₁ relaxivities of the MaGICs at physiological pH were 2-10 times higher than that of a commercial manganese-based positive contrast agent. Anticancer drugs including doxorubicin, cisplatin and carboplatin were successfully encapsulated into the MaGICs with high efficiency. Drug release behavior was sustained and depended on pH (faster in acidic environments), drug structures and drug concentration (faster with high concentration). The anticancer drug-loaded manganese nanocarriers exhibited excellent anticancer activity against MCF-7 breast cancer cells together with high relaxivity. Thus, these drug-loaded MaGICs could potentially be utilized for simultaneous diagnosis and treatment of cancer.

Organic Nanovesicular Cargoes for Sustained Drug Delivery: Synthesis, Vesicle Formation, Controlling “Pearling” States, and Terfenadine Loading/Release Studies

“Sustained drug delivery systems” which are designed to accomplish long-lasting therapeutic effect are one of the challenging topics in the area of nanomedicine. We developed an innovative strategy to prepare nontoxic and polymer stabilized organic nanovesicles (diameter: 200 nm) from a novel bolaamphiphile, where two hydrogen bonding acetyl cytosine molecules connected to 4,4′′-positions of the 2,6-bispyrazolylpyridine through two flexible octyne chains. The nanovesicles behave like biological membrane by spontaneously self-assembling into “pearl-like” chains and subsequently forming long nanotubes (diameter: 150 nm), which further develop into various types of network-junctions through self-organization. For drug loading and delivery applications, the nanovesicles were externally protected with biocompatible poly(ethyleneglycol)-2000 to prevent them from fusion and ensuing tube formation. Nontoxic nature of the nanovesicles was demonstrated by zebrafish teratogenicity assay. Biocompatible nanovesicles were loaded with “terfenadine” drug and successfully utilized to transport and release drug in sustained manner (up to 72 h) in zebrafish larvae, which is recognized as an emerging in vivo model system.

Combined Effects of Bone Marrow-Derived Mesenchymal Stem Cells and PLGA-PEG-PLGA Scaffolds on Repair of Articular Cartilage Defect

Here we reported a combined technique for articular cartilage repair, consisting of bone arrow mesenchymal stem cells (BMMSCs) and poly (dl-lactide-co-glycolide-b-ethylene glycol-b-dl-lactide-co-glycolide) (PLGA-PEG-PLGA) triblock copolymers carried with tissue growth factor (TGF-belat1). In the present study, BMMSCs seeded on PLGA-PEG-PLGA with were incubated in vitro, carried or not TGF-belta1, Then the effects of the composite on repair of cartilage defect were evaluated in rabbit knee joints in vivo. Full-thickness cartilage defects (diameter: 5 mm; depth: 3 mm) in the patellar groove were either left empty (n=18), implanted with BMMSCs/PLGA (n=18), TGF-belta1 modified BMMSCs/PLGA-PEG-PLGA. The defect area was examined grossly, histologically at 6, 24 weeks postoperatively. After implantation, the BMMSCs /PLGA-PEG-PLGA with TGF-belta1 group showed successful hyaline-like cartilage regeneration similar to normal cartilage, which was superior to the other groups using gross examination, qualitative and quantitative histology. These findings suggested that a combination of BMMSCs/PLGA-PEG-PLGA carried with tissue growth factor (TGF-belat1) may be an alternative treatment for large osteochondral defects in high loading sites.

Critical assessment of implantable drug delivery devices in glaucoma management

Glaucoma is a group of heterogeneous disorders involving progressive optic neuropathy that can culminate into visual impairment and irreversible blindness. Effective therapeutic interventions must address underlying vulnerability of retinal ganglion cells (RGCs) to degeneration in conjunction with correcting other associated risk factors (such as elevated intraocular pressure). However, realization of therapeutic outcomes is heavily dependent on suitable delivery system that can overcome myriads of anatomical and physiological barriers to intraocular drug delivery. Development of clinically viable sustained release systems in glaucoma is a widely recognized unmet need. In this regard, implantable delivery systems may relieve the burden of chronic drug administration while potentially ensuring high intraocular drug bioavailability. Presently there are no FDA-approved implantable drug delivery devices for glaucoma even though there are several ongoing clinical studies. The paper critically assessed the prospects of polymeric implantable delivery systems in glaucoma while identifying factors that can dictate (a) patient tolerability and acceptance, (b) drug stability and drug release profiles, (c) therapeutic efficacy, and (d) toxicity and biocompatibility. The information gathered could be useful in future research and development efforts on implantable delivery systems in glaucoma.

IL-1Ra and its delivery strategies: inserting the association in perspective

Interleukin-1 receptor antagonist (IL-1Ra) is a naturally occurring anti-inflammatory antagonist of interleukin-1 family of pro-inflammatory cytokines. The broad spectrum anti-inflammatory effects of IL-1Ra have been investigated against various auto-immune diseases such as diabetes mellitus, rheumatoid arthritis. Despite of its outstanding broad spectrum anti-inflammatory effects, IL-1Ra has short biological half-life (4-6 h) and to cope with this problem, up till now, many delivery strategies have been applied either to extend the half-life and/or prolong the steady-state sustained release of IL-1Ra from its target site. Here in our present paper, we have provided an overview of all approaches attempted to prolong the duration of therapeutic effects of IL-1Ra either by fusing IL-1Ra using fusion protein technology to extend the half-life and/or development of new dosage forms using various biodegradable polymers to prolong its steady-state sustained release at the site of administration. These approaches have been characterized by their intended impact on either in vitro release characteristics and/or pharmacokinetic and pharmacodynamic parameters of IL-1Ra. We have also compared these delivery strategies with each other on the basis of bioactivity of IL-1Ra after fusion with fusion protein partner and/or encapsulation with biodegradable polymer.

Effect of MgO nanofillers on burst release reduction from hydrogel nanocomposites

In this study, MgO nanoparticles are applied to control the initial burst release by modification of matrix structure, thereby affecting the release mechanism. The effects of MgO nanofiller loading on the in vitro release of a model drug are investigated. Surface topography and release kinetics of hydrogel nanocomposites are also studied in order to have better insight into the release mechanism. It was found that the incorporation of MgO nanofillers can significantly decrease the initial burst release. The effect of genipin (GN) on burst release was also compared with MgO nanoparticles, and it was found that the impact of MgO on burst release reduction is more obvious than GN; however, GN cross-linking caused greater final release compared to blanks and nanocomposites. To confirm the capability of nanocomposite hydrogels to reduce burst release, the release of β-carotene in Simulated Gastric Fluid and Simulated Intestinal Fluid was also carried out. Thus, the application of MgO nanoparticles seems to be a promising strategy to control burst release.

Oral colon-specific therapeutic approaches toward treatment of inflammatory bowel disease

INTRODUCTION

Inflammatory bowel disease (IBD) is a chronic relapsing idiopathic disease. In clinical terms, most patients require lifelong medication associated with possible unpleasant adverse effects. Oral colon-specific drug delivery systems are designed to deliver therapeutic drugs to the inflamed colon to target pathophysiological manifestations of IBD. The aim is to maintain the drug with proper concentration in the inflamed colon, to enhance drug residence time and to minimize drug absorption by healthy tissues.

AREAS COVERED

This review addresses the main barriers for colon-specific drug delivery from organism, tissue and cell levels, respectively. It also summarizes novel colon-specific therapeutic strategies using microparticles and nanoparticles.

EXPERT OPINION

Oral colon-specific drug delivery represents a possible approach toward efficient treatment of IBD. As the environment of the gastrointestinal tract is harsh and intricate, this approach requires that drug carriers can respond to specific environmental factors of the inflamed colon, permitting stimulus-responsive release of loaded drugs to specific cells or even into specific organelles within cells.

Ocular drug delivery for glaucoma management

Current glaucoma management modalities are hindered by low patient compliance and adherence. This can be due to highly complex treatment strategies or poor patient understanding. Treatments focus on the management or reduction of intraocular pressure. This is most commonly done through the use of daily topical eye drops. Unfortunately, despite effective therapies, glaucoma continues to progress, possibly due to patients not adhering to their treatments. In order to mitigate these patient compliance issues, many sustained release treatments are being researched and are entering the clinic. Conjunctival, subconjunctival, and intravitreal inserts, punctal plugs, and drug depots are currently in clinical development. Each delivery system has hurdles, yet shows promise and could potentially mitigate the current problems associated with poor patient compliance.

Controlled-release and preserved bioactivity of proteins from (self-assembled) core-shell double-walled microspheres

In order to address preserved protein bioactivities and protein sustained-release problems, a method for preparing double-walled microspheres with a core (protein-loaded nanoparticles with a polymer-suspended granule system-formed core) and a second shell (a polymer-formed shell) for controlled drug release and preserved protein bioactivities has been developed using (solid-in-oil phase-in-hydrophilic oil-in-water (S/O/O_h/W)) phases. The method, based on our previous microsphere preparation method (solid-in-oil phase-in-hydrophilic oil-in-water (S/O/O_h/W), employs different concentric poly(D,L-lactide-co-glycolide), poly(D,L-lactide), and protein-loaded nanoparticles to produce a suspended liquid which then self-assembles to form shell-core microspheres in the hydrophilic oil phase, which are then solidified in the water phase. Variations in the preparation parameters allowed complete encapsulation by the shell phase, including the efficient formation of a poly(D,L-lactide) shell encapsulating a protein-loaded nanoparticle-based poly(D,L-lactide-co-glycolide) core. This method produces core-shell double-walled microspheres that show controlled protein release and preserved protein bioactivities for 60 days. Based upon these results, we concluded that the core-shell double-walled microspheres might be applied for tissue engineering and therapy for chronic diseases, etc.

A strategy to establish a gene-activated matrix on titanium using gene vectors protected in a polylactide coating

Bioactive implants are promising tools in regenerative medicine. Here we describe a versatile procedure for preparing a gene-activated matrix on titanium. Lyophilized copolymer-protected gene vectors (COPROGs) suspended in poly(d,l-lactide) (PDLLA) solutions in ethyl acetate were used to varnish solid surfaces. The gene-activated PDLLA surfaces were first established on polypropylene 96-well plates. Vector release from these surfaces in aqueous buffer, cell viability and gene transfer efficiency to NIH 3T3 fibroblasts was strongly dependent on the vector dose and its ratio to PDLLA film thickness. A detailed analysis of these relationships allowed establishing correlations which can be used to calculate suitable combinations of COPROGs and PDLLA yielding optimal gene transfer efficiency. This was verified with COPROG-activated PDLLA coatings on titanium foils. HEK 293 and mesenchymal stem cells expressed the BMP-2 gene comprised in the gene-activated surface in a manner that was consistent with the predicted dose-response and toxicity profiles found in NIH 3T3 cells. The systematic procedure presented here for identifying optimal coating compositions can be applied to any combination of vector type and coating material.

Novel drug delivery systems for glaucoma

Reduction of intraocular pressure (IOP) by pharmaceutical or surgical means has long been the standard treatment for glaucoma. A number of excellent drugs are available that are effective in reducing IOP. These drugs are typically applied as eye drops. However, patient adherence can be poor, thus reducing the clinical efficacy of the drugs. Several novel delivery systems designed to address the issue of adherence and to ensure consistent reduction of IOP are currently under development. These delivery systems include contact lenses-releasing glaucoma medications, injectables such as biodegradable micro- and nanoparticles, and surgically implanted systems. These new technologies are aimed at increasing clinical efficacy by offering multiple delivery options and are capable of managing IOP for several months. There is also a desire to have complementary neuroprotective approaches for those who continue to show progression, despite IOP reduction. Many potential neuroprotective agents are not suitable for traditional oral or drop formulations. Their potential is dependent on developing suitable delivery systems that can provide the drugs in a sustained, local manner to the retina and optic nerve. Drug delivery systems have the potential to improve patient adherence, reduce side effects, increase efficacy, and ultimately, preserve sight for glaucoma patients. In this review, we discuss benefits and limitations of the current systems of delivery and application, as well as those on the horizon.