Investigating the history of prehistoric glues by gas chromatography-mass spectrometry

Differences in birch tar composition are explained by adhesive function in the central European Iron Age

Birch bark tar is the most widely documented adhesive in prehistoric Europe. More recent periods attest to a diversification in terms of the materials used as adhesives and their application. Some studies have shown that conifer resins and beeswax were added to produce compound adhesives. For the Iron Age, no comparative large-scale studies have been conducted to provide a wider perspective on adhesive technologies. To address this issue, we identify adhesive substances from the Iron Age in north-eastern France. We applied organic residue analysis to 65 samples from 16 archaeological sites. This included residues adhering to ceramics, from vessel surface coatings, repaired ceramics, vessel contents, and adhesive lumps. Our findings show that, even during the Iron Age in north-eastern France, birch bark tar is one of the best-preserved adhesive substances, used for at least 400 years. To a lesser extent, Pinaceae resin and beeswax were also identified. Through statistical analyses, we show that molecular composition differs in samples, correlating with adhesive function. This has implications for our understanding of birch bark tar production, processing and mode of use during the Iron Age in France and beyond.

The dynamic lives of osseous points from Late Palaeolithic/Early Mesolithic Doggerland: A detailed functional study of barbed and unbarbed points from the Dutch North Sea

Osseous barbed and unbarbed points are commonly recovered from the Dutch North Sea and other Mesolithic sites of northern Europe. Interpreted as elements of projectile weaponry, barbed points are considered by archaeologists to be a technological innovation in the hunting equipment of hunter-gatherers. However, debate about their exact use and identification of the targeted prey species is still ongoing. To shed light on the function of these tools, we analysed a sample of 17 artefacts from the Netherlands with a multi-disciplinary approach encompassing morphometric, functional, and chemical analysis. 14C-AMS dating yielded the oldest date for a barbed point from the Dutch coast (⁓13000 cal. BP). The observation of microwear traces preserved on the tools provides solid evidence to interpret the function of barbed and unbarbed points. We show that there were two distinct tool categories. 1) Barbed points hafted with birch tar and animal or vegetal binding were likely projectile tips for terrestrial and aquatic hunting. We provide strong clues to support the link between small barbed points and fishing using wear traces. 2) Points without barbs served as perforators for animal hides. Our results highlight the importance of use-wear and residue analysis to reconstruct prehistoric hunting activities. The functional interpretation of projectile points must also rely on microwear traces and not merely on the association with faunal remains, historical sources, and ethnographic comparisons.

Cuisine in transition? Organic residue analysis of domestic containers from 9th-14th century Sicily

From the 9th to 14th centuries AD, Sicily experienced a series of rapid and quite radical changes in political regime, but the impact of these regime changes on the lives of the people that experienced them remains largely elusive within the historical narrative. We use a multi-faceted lipid residue approach to give direct chemical evidence of the use of 248 everyday domestic ceramic containers from Islamic and post-Islamic contexts in western Sicily to aid our understanding of daily habits throughout this period of political change. A range of commodities was successfully identified, including animal fats, vegetable products, fruit products (potentially including wine) and plant resins. The study highlights the complexity of residues in early medieval Mediterranean society as, in many cases, mixtures of commodities were observed reflecting sequential cooking events and/or the complex mixtures reflective of medieval recipes. However, overall, there were no clear changes in the composition of the residues following the imposition of Norman control over the island and through subsequent periods, despite some differences between urban centres and rural sites. Thus, lending to the idea that post-Islamic populations largely flourished and benefited from the agricultural systems, resources and recipes left by their predecessors.

Detection of dairy products from multiple taxa in Late Neolithic pottery from Poland: an integrated biomolecular approach

The detection of dairy processing is pivotal to our understanding of ancient subsistence strategies. This culinary process is linked to key arguments surrounding the evolution of lactase persistence in prehistory. Despite extensive evidence indicating the presence of dairy products in ceramics in the European Neolithic, questions remain about the nature and extent of milk (and lactose) processing and consumption. In order to investigate past patterns of dairy processing, here we analyse ancient proteins identified from Late Neolithic Funnel Beaker ceramics, scrutinizing the principle that curd and whey proteins partition during the production of dairy foods from milk. Our results indicate the presence of casein-rich dairy products in these vessels suggesting the creation of curd-enriched products from raw milk. Moreover, this analysis reveals the use of multiple species for their dairy products in the Late Neolithic, adding to a growing body of evidence for the period. Alongside palaeoproteomic analysis, we applied well-established lipid residue analysis. Differential interpretations between these two approaches show that palaeoproteomics is especially useful where the effects from isotope mixing may underestimate the frequency of dairy products in archaeological ceramics, highlighting the potential utility of a multi-stranded approach to understand life histories of vessel use.

High-resolution sediment analysis reveals Middle Bronze Age byre-houses at the site of Oppeano (Verona province, NE Italy)

High-resolution sediment analysis allowed us to identify two Middle Bronze Age (MBA 1, 1650–1550 cal a BCE) byre-houses at the waterlogged site of Oppeano “4D”, south of Verona (Veneto region, NE Italy). The site lies in a low-lying valley incised by the Adige River in its LGM alluvial fan. In this fluvio-palustrine environment burial and taphonomic conditions were such that the archaeological record was extremely well preserved. The wooden elements making up basal parts of nine ‘huts’ were in fact exposed at Oppeano, and so were their internal accretion deposits. These featured finely laminated dung units deriving from the stalling of small herbivores, possibly ovicaprids, intercalated with repeated accumulations of wood ash. This was produced in large and multi-stratified hearths that were exposed within each hut. Organic petrology provided evidence of the production of wood tar inside one of the studied structures. At Oppeano 4D it was thus demonstrated that these structures were not just byres or stables, but spaces that housed humans together with animals at least during some periods of the year, hence byre-houses. The identification of byre-houses in a Middle Bronze Age settlement is key for the reconstruction of socio-economic aspects of Bronze Age economy and production systems.

Focusing on Volatile Organic Compounds of Natural Resins by Selected-Ion Flow Tube-Mass Spectrometry

The analysis of archeological artifacts, due to the high value of antique objects, is preferably performed by nondestructive, noninvasive, and in situ techniques. At present, the most common in situ protocols used for the analysis of organic materials are spectroscopic approaches. In this work, we tested selected-ion flow tube-mass spectrometry (SIFT-MS), a transportable mass spectrometry system for the characterization and discrimination of natural resins by the analysis of their volatile organic compounds profiles. We chose diterpenoid, triterpenoid, and aromatic resins as reference materials, focusing on the most identified in archeological artifacts. This work aims to create a SIFT-MS database of mass spectra suitable for characterizing archeological samples. The spectral data obtained by SIFT-MS were interpreted with the aid of chromatograms and mass spectra obtained by head space-gas chromatography/mass spectrometry (HS-GC/MS). Finally, principal components analysis (PCA) was used to further underline the differences among the different materials and to investigate the possibility of discriminating different classes of resins based on their SIFT spectra.

Neolithic farmers or Neolithic foragers? Organic residue analysis of early pottery from Rakushechny Yar on the Lower Don (Russia)

The emergence of pottery in Europe is associated with two distinct traditions: hunter-gatherers in the east of the continent during the early 6th millennium BC and early agricultural communities in the south-west in the late 7th millennium BC. Here we investigate the function of pottery from the site of Rakushechny Yar, located at the Southern fringe of Eastern Europe, in this putative contact zone between these two economic 'worlds'. To investigate, organic residue analysis was conducted on 120 samples from the Early Neolithic phase (ca. mid-6^th millennium BC) along with microscopic and SEM analysis of associated foodcrusts. The results showed that the earliest phase of pottery use was predominantly used to process riverine resources. Many of the vessels have molecular and isotopic characteristics consistent with migratory fish, such as sturgeon, confirmed by the identification of sturgeon bony structures embedded in the charred surface deposits. There was no evidence of dairy products in any of the vessels, despite the fact these have been routinely identified in coeval sites to the south. Further analysis of some of the mammalian bones using ZooMS failed to demonstrate that domesticated animals were present in the Early Neolithic. Nevertheless, we argue that intensive exploitation of seasonally migratory fish, accompanied by large-scale pottery production, created storable surpluses that led to similar socio-economic outcomes as documented in early agricultural societies.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12520-021-01412-2.

Birch bark tar in early Medieval England - Continuity of tradition or technological revival?

Birch bark tar is a manufactured product with a history of production and use that reaches back to the Palaeolithic. Its sticky, water resistant and biocidal properties mean that it has a wide range of applications, for example, as a multipurpose adhesive, sealant and in medicine. Archaeological evidence for birch bark tar in the old world covers a broad geographic range from the UK to the Baltic and from the Mediterranean to Scandinavia. In the east and north of this range there is continuity of use to modern times but in western Europe and the British Isles the use of birch bark tar has generally been viewed as limited to prehistory, with gradual displacement by pine tars during the Roman period. Here, we report new finds of birch bark tar from two early Medieval sites in the east of England. Analysis by HT-GC/MS to identify the tars also revealed fatty material, possibly added to modify the tar. The different contexts of the finds point to diverse applications of the material: in one case perhaps a medicine, the other associated with a ceramic container, possibly used for processing the tar. The results present the first identification of birch bark tar from early Medieval archaeological contexts in the UK. Together they indicate a later period of use for birch bark tar in the UK than has been previously observed and raise the question of whether this indicates evidence of a longer continuity of use than hitherto recognised or a later reintroduction of the technology in the Medieval period, in which case the similarities between the find sites, both early Anglo-Saxon cemeteries with comparable assemblages of grave goods, may be significant.

A new experimental methodology for assessing adhesive properties shows that Neandertals used the most suitable material available

The use of adhesives for hafting stone tools at least 191 ka was a major technological development. Stone tools could be more securely attached to handles, thus improving their efficiency and practicality. To produce functional adhesives required forethought and planning, as well as expertise and knowledge of the resources available in the landscape. This makes adhesives important in discussions about Neandertal and early modern human technological and mental capabilities. However, we currently know very little about how these early adhesive materials behaved under different circumstances, or why certain materials were used and others were not. Here we present the results of controlled laboratory bulk property tests (hardness, rheology and thermogravimetric analysis) on replica Paleolithic adhesives. We conclude that birch tar is more versatile, has better working properties, and is more reusable than pine resin, the most likely alternative material. Neandertals may therefore have invested more time and resources to produce birch tar because it was the best material available, both functionally and economically, throughout the majority of Europe during the Middle to Late Pleistocene. Our results further demonstrate that Neandertals had high levels of technological expertise and knowledge of the natural resources available to them in their environment.

Middle Paleolithic complex technology and a Neandertal tar-backed tool from the Dutch North Sea

We report the discovery of a 50,000-y-old birch tar-hafted flint tool found off the present-day coastline of The Netherlands. The production of adhesives and multicomponent tools is considered complex technology and has a prominent place in discussions about the evolution of human behavior. This find provides evidence on the technological capabilities of Neandertals and illuminates the currently debated conditions under which these technologies could be maintained. 14C-accelerator mass spectrometry dating and the geological provenance of the artifact firmly associates it with a host of Middle Paleolithic stone tools and a Neandertal fossil. The find was analyzed using pyrolysis-gas chromatography-mass spectrometry, X-ray micro-computed tomography, and optical light microscopy. The object is a piece of birch tar, encompassing one-third of a flint flake. This find is from northwestern Europe and complements a small set of well-dated and chemically identified adhesives from Middle Paleolithic/Middle Stone Age contexts. Together with data from experiments and other Middle Paleolithic adhesives, it demonstrates that Neandertals mastered complex adhesive production strategies and composite tool use at the northern edge of their range. Thus, a large population size is not a necessary condition for complex behavior and technology. The mitigation of ecological risk, as demonstrated by the challenging conditions during Marine Isotope Stage 4 and 3, provides a better explanation for the transmission and maintenance of technological complexity.

Strong, Rebondable, Dynamic Cross-Linked Cellulose Nanocrystal Polymer Nanocomposite Adhesives

A series of strong, rebondable polydisulfide nanocomposite adhesive films have been prepared via the oxidation of a thiol-endcapped semicrystalline oligomer with varying amounts of thiol-functionalized cellulose nanocrystals (CNC-SH). The nanocomposites are designed to have two temperature-sensitive components: (1) the melting of the semicrystalline phase at ca. 70 °C and (2) the inherent dynamic behavior of the disulfide bonds at ca. 150 °C. The utility of these adhesives was demonstrated on different bonding substrates (hydrophilic glass slides and metal), and their bonding at both 80 and 150 °C was examined. In all cases, stronger bonding was achieved at temperatures where the disulfide bonds are dynamic. For high surface energy substrates, such as hydrophilic glass or metal, the adhesive shear strength increases with CNC-SH content, with the 30 wt % CNC-SH composites exhibiting adhesive shear strengths of 50 and 23 MPa for hydrophilic glass and metal, respectively. The effects of contact pressure and time of bonding were also investigated. It was found that ca. 20-30 min bonding time was required to reach maximum adhesion, with adhesives containing higher wt % CNCs requiring longer bonding times. Furthermore, it was found that, in general, an increase in contact pressure results in an increase in the shear strength of the adhesive. The rebonding of the adhesives was demonstrated with little-to-no loss in adhesive shear strength. In addition, the 30 wt % nanocomposite adhesive was compared to some common commercially available adhesives and showed significantly stronger shear strengths when bonded to metal.

New criteria for the molecular identification of cereal grains associated with archaeological artefacts

The domestication and transmission of cereals is one of the most fundamental components of early farming, but direct evidence of their use in early culinary practices and economies has remained frustratingly elusive. Using analysis of a well-preserved Early Bronze Age wooden container from Switzerland, we propose novel criteria for the identification of cereal residues. Using gas chromatography mass spectrometry (GC-MS), we identified compounds typically associated with plant products, including a series of phenolic lipids (alkylresorcinols) found only at appreciable concentration in wheat and rye bran. The value of these lipids as cereal grain biomarkers were independently corroborated by the presence of macrobotanical remains embedded in the deposit, and wheat and rye endosperm peptides extracted from residue. These findings demonstrate the utility of a lipid-based biomarker for wheat and rye bran and offer a methodological template for future investigations of wider range of archaeological contexts. Alkylresorcinols provide a new tool for residue analysis which can help explore the spread and exploitation of cereal grains, a fundamental component of the advent and spread of farming.

Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives

The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives.

Pulque production from fermented agave sap as a dietary supplement in Prehispanic Mesoamerica

Although in modern societies fermented beverages are associated with socializing, celebration, and ritual, in ancient times they were also importa`nt sources of essential nutrients and potable water. In Mesoamerica, pulque, an alcoholic beverage produced from the fermented sap of several species of maguey plants (Agavaceae; Fig. 1) is hypothesized to have been used as a dietary supplement and risk-buffering food in ancient Teotihuacan (150 B.C. to A.D. 650). Although direct archaeological evidence of pulque production is lacking, organic residue analysis of pottery vessels offers a new avenue of investigation. However, the chemical components of alcoholic beverages are water-soluble, greatly limiting their survival over archaeological timescales compared with hydrophobic lipids widely preserved in food residues. Hence, we apply a novel lipid biomarker approach that considers detection of bacteriohopanoids derived from the ethanol-producing bacterium Zymomonas mobilis for identifying pulque production/consumption in pottery vessels. Gas chromatography-mass spectrometry selected ion monitoring (m/z 191) of lipid extracts of >300 potsherds revealed characteristic bacteriohopanoid distributions in a subset of 14 potsherds. This hopanoid biomarker approach offers a new means of identifying commonly occurring bacterially fermented alcoholic beverages worldwide, including palm wine, beer, cider, perry, and other plant sap- or fruit-derived beverages [Swings J, De Ley J (1977) Bacteriol Rev 41(1):1-46].

Advanced discriminating criteria for natural organic substances of cultural heritage interest: spectral decomposition and multivariate analyses of FT-Raman and FT-IR signatures

Natural organic substances are involved in many aspects of the cultural heritage field. Their presence in different forms (raw, heated, mixed), with various conservation states, constitutes a real challenge regarding their recognition and discrimination. Their characterization usually involves the use of separative techniques which imply destructive sampling and specific analytical preparations. Here we propose a non destructive approach using FT-Raman and infrared spectroscopies for the identification and differentiation of natural organic substances. Because of their related functional groups, they usually present similar vibrational signatures. Nevertheless the use of appropriate signal treatment and statistical analysis was successfully carried out to overcome this limitation, then proposing new objective discriminating methodology to identify these substances. Spectral decomposition calculations were performed on the CH stretching region of a large set of reference materials such as resins, oils, animal glues, and gums. Multivariate analyses (Principal Component Analyses) were then performed on the fitting parameters, and new discriminating criteria were established. A set of previously characterized archeological resins, with different surface aspects or alteration states, was analyzed using the same methodology. These testing samples validate the efficiency of our discriminating criteria established on the reference corpus. Moreover, we proved that some alteration or ageing of organic materials is not an issue to their recognition.

Py-GC/MS, GC/MS and FTIR investigations on Late Roman-Egyptian adhesives from opus sectile: new insights into ancient recipes and technologies

An analytical protocol based on optical microscopy, Fourier transforms infrared spectroscopy (FTIR), analytical pyrolysis in the presence of hexamethyldisilazane followed by gas chromatographic/mass spectrometric analysis (Py-GC/MS) and gas chromatography/mass spectrometry after alkaline hydrolysis, solvent extraction and trimethylsilylation (GC/MS) was used in the chemical characterisation of the original adhesives used to fix monochrome and mosaic glass and stone plaques coming from the Late Roman archaeological site of Antinoopolis (Egypt). FTIR analysis demonstrated the presence of calcite fragments, and Py-GC/MS and GC/MS analyses provided detailed molecular compositions, highlighting the presence of a wide range of compound classes including diterpenoid acids, tricyclic abietanes with a high degree of aromatisation, mid- and long-chain monocarboxylic fatty acids, mono- and di-hydroxy acids, alpha,omega-dicaboxylic fatty acids, n-alkanols, and n-alkanes. Characteristic biomarkers and their distribution patterns indicated the presence of pine pitch in all the adhesives, which in some cases was admixed with beeswax and brassicaceae seed oil. The results provided new insights into the complex recipes used by artisans in ancient Egypt in the production of adhesives and in the sophisticated manufacture of opus sectile decorations.

Fourier transform infrared spectroscopy as a suitable technique in the study of the materials used in waterproofing of archaeological amphorae

The resinous materials from the interior surfaces of two Roman and one Iberian amphora were studied with Fourier transform infrared (FTIR) spectroscopy. The results were then compared with those obtained by synchrotron radiation-FTIR, scanning electron microscopy (SEM), and gas chromatography-mass spectrometry (GC-MS). The FTIR spectra obtained by the technique of KBr micropellets, prepared directly with the materials scraped from the amphora without any further sample preparation, provided enough information to establish their diterpenoic nature, and even to differentiate between the two main materials employed for waterproofing purposes, pitch and wood tar. Methyl dehydroabietic acid (DHAM) is the main chemical marker that allows a distinction to be made between these two materials. Pitch and wood tar were prepared in the laboratory heating pine resin and resinous pine wood, respectively. These resinous waterproofing materials were compared with the coatings extracted from the amphorae. The samples whose direct FTIR spectra showed a signal at approximately 1740 cm(-1), attributed to a carbonyl group of methyl ester, presented as well a peak of DHAM in the GC-MS chromatogram of the neutral fraction of their extract. Samples without this signal in their spectra did not present DHAM in their chromatogram. This work studies, for the first time, waterproofing of an amphora attributed to the Iberian culture.

Molecular criteria for discriminating adipose fat and milk from different species by NanoESI MS and MS/MS of their triacylglycerols: application to archaeological remains

A new multistep analytical methodology is described in this paper for the precise identification of triacylglycerols, which are biomarkers of dairy products and subcutaneous fats, that may be chemically identified in archaeological pottery. It consists of the analysis of the total lipid extract from different kinds of fats by high-temperature gas chromatography, performed in order to select the ceramic vessels in which animal fats are well preserved, followed by nanoelectrospray QqTOF mass spectrometry that allows for distinguishing the specific origins of the lipids detected (namely, cow, sheep, or goat). The analysis of model samples, cow and goat dairy products and cow and sheep adipose fats, was successfully achieved. The fatty acid composition of each triacylglycerol was identified, which allowed for the discrimination of subcutaneous fats and dairy fats and distinguishing between cow and goat milk. This methodology was then applied to archaeological samples, and the presence of goat milk, cow milk, and possibly sheep subcutaneous fat was assessed based on the discriminating criteria found on modern fats.

Aromatic resin characterisation by gas chromatography–mass spectrometry

An analytical procedure based on alkaline hydrolysis, solvent extraction and trimethyl-silylation followed by gas chromatography-mass spectrometry (GC-MS) analysis was used to study the chemical composition of benzoe and storax resins, water-insoluble exudates of trees of the Styrax and Liquidambar genus. They are chemically characterised by having aromatic acids, alcohols and esters as their main components and are thus known as aromatic and/or balsamic resins. This analytical procedure allowed us to characterise the main components of the two resins and, even though cinnamic acid is the main component of both the resins, the presence of other characteristic aromatic compounds and triterpenes permitted us to distinguish between the two materials. All the compounds identified in benzoe resin were detected in an archaeological organic residue from an Egyptian ceramic censer (fifth to seventh centuries a.d.), thus proving that this resin was used as one of the components of the mixture of organic materials burned as incense. These results provide the first chemical evidence of the presence of benzoe resin in an archaeological material from Mediterranean area.

Elucidation of molecular and elementary composition of organic and inorganic substances involved in 19th century wax sculptures using an integrated analytical approach

Wax sculptures contain several materials from both organic and inorganic nature. These works of art are particularly fragile. Determining their chemical composition is thus of prime importance for their preservation. The identification of the recipes of waxy pastes used through time also provides valuable information in the field of art history. The aim of the present research was to develop a convenient analytical strategy, as non-invasive as possible, that allows to identify the wide range of materials involved in wax sculptures. A multi-step analytical methodology, based on the use of complementary techniques, either non- or micro-destructive, was elaborated. X-ray fluorescence and micro-Raman spectroscopy were used in a non-invasive way to identify inorganic pigments, opacifiers and extenders. The combination of structural and separative techniques, namely infrared spectroscopy, direct inlet electron ionisation mass spectrometry and high temperature gas chromatography, was shown to be appropriate for unravelling the precise composition of the organic substances. A micro-chemical test was also performed for the detection of starch. From this study it has been possible to elucidate the composition of the waxy pastes used by three different sculptors at the end of the 19th century. Complex and elaborated recipes, in which a large range of natural substances were combined, were highlighted.

Characterisation of wax works of art by gas chromatographic procedures

To identify the various natural and synthetic substances used by sculptors at the end of the 19th century, several contemporary reference samples were investigated by high temperature gas chromatography (HT GC) and HT GC-MS. Using specific chromatographic conditions and minimising sample preparation, we could separate, detect and identify a wide range of biomolecular markers covering a great variety of molecular weights and volatilities, with a minimum amount of sample, in a single run. Beeswax, spermaceti, carnauba, candellila and Japan waxes as well as pine resin derivatives, animal fats, paraffin, ozokerite and stearin, used as additives in wax works of art, were chemically investigated. In the case of low volatile compounds, transbutylation was performed. The structure of long-chain esters of spermaceti was elucidated for the first time by HT GC-MS analysis. Such a method was then carried out on 10 samples collected on a statuette of Junon by Antoine-Louis Barye (Louvre Museum, Paris, France) and on a sculpture by Aimé-Jules Dalou (Musée de la Révolution Française, Vizille, France). The analytical results obtained provide new data on the complex recipes elaborated by sculptors at the end of the 19th century.

Chemical study of triterpenoid resinous materials in archaeological findings by means of direct exposure electron ionisation mass spectrometry and gas chromatography/mass spectrometry

A systematic study of standard triterpenes (alpha-amyrine, oleanolic acid, betulin, lupeol, betulinic acid and lupenone) and of raw resinous materials (frankincense resin, mastic resin and birch bark pitch) was performed using direct exposure electron ionisation mass spectrometry (DE-MS) and gas chromatography/mass spectrometry (GC/MS). DE-MS provides a mass spectral fingerprint of organic materials in a few minutes which highlights the compounds that are the main components in the sample. The application of principal component analysis (PCA) on DE-MS data in the mass ranges m/z 181-260 and m/z 331-500, corresponding to the fragmentation of triterpenoid molecules, enabled us to distinguish between different triterpenoid materials such as mastic resin, frankincense resin and birch bark pitch, and to graphically plot the resinous substances in three separate clusters, retaining 89% of the total variance. GC/MS analysis of the same materials has permitted us to elucidate in detail the molecular composition and to identify minor components and species that act as markers of the degradation undergone by the materials. The paper also reports the results for the organic residues contained in an Egyptian censer (5th-7th century AD) which was recovered in the excavation of the Necropolis of Antinoe (Egypt), and for the hafting material found on a Palaeolithic tool recovered at the site of Campitello (Arezzo, Tuscany), dating back to the Mid-Pleistocene period. Although DE-MS was found to be a fast analytical tool, it failed to give any information on the presence of less abundant compounds when applied to mixtures of different materials: only mastic resin was found in the residues from the Roman censer, whereas GC/MS analysis identified the presence of a vegetable oil from Brassicaceae seeds and Pinaceae resin. Birch bark pitch as a pure material was identified in the sample from the Palaeolithic flint flake using both procedures.

Molecular characterisation of birch bark tar by headspace solid-phase microextraction gas chromatography–mass spectrometry: A new way for identifying archaeological glues

To develop an analytical methodology, as non-destructive as possible, suitable for the identification of natural substances from archaeological origin, we studied the potentiality of solid-phase microextraction (SPME) for analysing birch bark tar, an adhesive commonly used during ancient times. First of all, birch bark tars were produced by a controlled heating of birch bark. The two kinds of samples obtained using different processes of fabrication, one at liquid state, the second one at solid state, were then analysed by headspace HS-SPME-GC-MS. Different conditions of sample treatment were tested (two different fibre coatings, various times and temperatures of extraction) in order to suggest optimal conditions for the analysis of birch bark tar. Both samples were shown to be rich in volatile organic components. Two main groups of constituents, namely phenolic compounds issued from lignin or tannin known to be present in bark and sesquiterpenoid hydrocarbons, secondary metabolites largely distributed in the plant kingdom, were detected for the first time in birch bark tar. HS-SPME-GC-MS appears thus to be a very efficient method for investigating the volatiles emitted by plant tars and could be further used for the study of birch bark tar samples issued from archaeological context.

Direct exposure electron ionization mass spectrometry and gas chromatography/mass spectrometry techniques to study organic coatings on archaeological amphorae

Two different analytical approaches, direct exposure electron ionization mass spectrometry (DE-MS) and gas chromatography/mass spectrometry (GC/MS), were compared in a study of archaeological resinous materials. DE-MS was found to be an efficient fingerprinting tool for the fast screening of organic archaeological samples and for providing information on the major components. GC/MS appeared to be more efficient in unravelling the sample composition at a molecular level, despite the long analysis time and the need for a wet chemical pretreatment. Both procedures were applied to characterize the organic material present as coatings in Roman and Egyptian amphorae. DE-MS successfully identified abietanic compounds, hence a diterpenic resinous material could be identified and its degree of oxidation assessed. GC/MS enabled us to identify dehydroabietic acid, 7-oxodehydroabietic acid, 15-hydroxy-7-oxodehydroabietic acid, 15-hydroxydehydroabietic acid, retene, tetrahydroretene, norabietatriene, norabietatetraene and methyl dehydroabietate. These oxidized and aromatized abietanes provided evidence that the amphorae examined were waterproofed with a pitch produced from resinous wood of plants from the Pinaceae family. The chemometric evaluation of the GC/MS data highlighted significant chemical differences between the pitches found in the two archaeological sites, basically related to differences in the production techniques of the materials and in their degradation pathways.

Analysis of organic colouring and binding components in colour layer of art works

Two methods of analysis of organic components of colour layers of art works have been tested: IR microspectroscopy of indigo, Cu-phthalocyanine, and Prussian blue, and MALDI-TOF-MS of proteinaceous binders and a protein-containing red dye. The IR spectra distortion common for smooth outer surfaces and polished cross sections of colour layer of art works is suppressed by reflectance measurement of microtome slices. The detection limit of the three blue pigments examined is approximately 0.3 wt% in reference colour layers in linseed oil binder with calcite as extender and lead white as a drying agent. The sensitivity has been sufficient to identify Prussian blue in repaints on a Gothic painting. MALDI-TOF-MS has been used to identify proteinaceous binders in two historical paintings, namely isinglass (fish glue) and rabbit glue. MALDI-TOF-MS has also been proposed for identification of an insect red dye, cochineal carmine, according to its specific protein component. The enzymatic cleavage with trypsin before MALDI-TOF-MS seems to be a very gentle and specific way of dissolution of the colour layers highly polymerised due to very long aging of old, e.g. medieval, samples.