Development and validation of an HPLC confirmatory method for the determination of tetracycline antibiotics residues in bovine muscle according to the European Union regulation 2002/657/EC

Accurate determination of four tetracycline residues in chicken meat by isotope dilution-liquid chromatography/tandem mass spectrometry

An analytical method based on isotope dilution-liquid chromatography-tandem mass spectrometry (ID-LC‒MS/MS) was developed to accurately determine four representative tetracyclines (tetracycline, chlortetracycline, doxycycline, and oxytetracycline) in chicken meat. Tetracyclines are known to have a great tendency for epimerization and keto-enol tautomerism, which often provoke major challenges in their determination. Since this isomerization was found to be unavoidable during the whole chain of the current analysis, the total content (µg kg^‒1) of individual tetracycline was quantified as a sum of each parent compound and its respective isomeric forms. Using this approach in combination with IDMS analysis, more consistent, accurate, and reproducible measurement results for the four tetracyclines in chicken meat were acquired. LC-MS/MS conditions and sample preparation processes were comprehensively optimized to minimize the chelating effect of tetracyclines and possible co-extracted interferences. Details of the sample preparation scheme, LC‒MS/MS detection, calculation equation, and method validation are described in this article. The method provided very good accuracy (97.7-102.6%) for all analytes across the concentration range of 10-200 µg kg^‒1, with relative standard deviations for intra-day and inter-day precision of less than 4%. The limits of quantification were below 0.2 µg kg^‒1, demonstrating the high sensitivity of the method. Furthermore, the measurement uncertainty was generally below 5.5%. Hence, the established method exhibits high-order metrological quality with superior performance over various existing methodologies. Moreover, this method can provide references for general food testing laboratories close to and far below the established maximum residue limits (100 µg kg^‒1) for animal muscle tissues.

Development of highly hydrophobic fabric phase sorptive extraction membranes and exploring their applications for the rapid determination of tocopherols in edible oils analyzed by high pressure liquid chromatography-diode array detection

Α novel, green, and facile fabric phase sorptive extraction (FPSE) prior to high pressure liquid chromatography with diode array detection (HPLC-DAD) methodology was developed for the efficient extraction and quantitative determination of tocopherols (α-, sum of (β+γ), and δ-) in edible oils. Among several highly hydrophobic FPSE membranes, sol-gel polycaprolactone-polydimethylsiloxane-polycaprolactone (sol-gel PCAP-PDMS-PCAP) coated polyester FPSE membrane was found as the most efficient in extracting tocopherol homologues from edible oil samples. To maximize the extraction efficiency of FPSE membrane, major parameters of FPSE including the membrane size, sample loading time, the choice of the appropriate elution solvent and the elution solvent volume, desorption time, and the influence of stirring were systematically optimized. The developed FPSE-HPLC-DAD methodology was validated and presented adequately low limits of detection (LODs) and limits of quantification (LOQs) over the ranges 0.05-0.10 μg/g, and 0.17-0.33 μg/g, respectively. The RSD% of the within-day and between-day assays were lower than 1.3, and 11.8, respectively, demonstrating good method precision. The trueness of the method was assessed by means of relative percentage of recovery and ranged between 90.8 and 95.1% for within-day assay, and between 88.7-92.8% for between-day assay. The developed methodology was applied in the analysis of edible oils.

A Rapid HPLC-UV Protocol Coupled to Chemometric Analysis for the Determination of the Major Phenolic Constituents and Tocopherol Content in Almonds and the Discrimination of the Geographical Origin

Reversed phase-high-pressure liquid chromatographic methodologies equipped with UV detector (RP-HPLC-UV) were developed for the determination of phenolic compounds and tocopherols in almonds. Nineteen samples of Texas almonds originating from USA and Greece were analyzed and 7 phenolic acids, 7 flavonoids, and tocopherols (-α, -β + γ) were determined. The analytical methodologies were validated and presented excellent linearity (r2 > 0.99), high recoveries over the range between 83.1 (syringic acid) to 95.5% (ferulic acid) for within-day assay (n = 6), and between 90.2 (diosmin) to 103.4% (rosmarinic acid) for between-day assay (n = 3 × 3), for phenolic compounds, and between 95.1 and 100.4% for within-day assay (n = 6), and between 93.2-96.2% for between-day assay (n = 3 × 3) for tocopherols. The analytes were further quantified, and the results were analyzed by principal component analysis (PCA), and agglomerative hierarchical clustering (AHC) to investigate potential differences between the bioactive content of almonds and the geographical origin. A decision tree (DT) was developed for the prediction of the geographical origin of almonds proposing a characteristic marker with a concentration threshold, proving to be a promising and reliable tool for the guarantee of the authenticity of the almonds.

Designing a moderately hydrophobic sol-gel monolithic Carbowax 20 M sorbent for the capsule phase microextraction of triazine herbicides from water samples prior to HPLC analysis

The determination of triazine herbicides in water samples is of utmost importance, due to their persistence and excessive use. However, since the concentration of triazine pesticides in real samples is low, an extraction/preconcentration step is typically required. Capsule phase microextraction (CPME) is a recently introduced sample preparation technique in which highly efficient sol-gel sorbents are encapsulated in a tubular polymer membrane. This particular design integrates the filtration and stirring mechanism into one extraction device, enabling the application of CPME for in situ sampling. In this study, CPME coupled to high performance liquid chromatography-diode array detection (HPLC-DAD) was employed for the first time for the determination of six triazine herbicides (i.e., simazine, cyanazine, atrazine, prometryn, terbuthylazine and propazine) in water samples. Microextraction capsules containing a moderately hydrophobic sol-gel Carbowax 20 M sorbent provided the highest extraction efficiency towards the examined pesticides. The main parameters affecting the adsorption and desorption steps of the CPME procedure were investigated and optimized. Under the selected conditions, limits of detection (signal/noise = 3.3) were 0.15 ng mL^-1 for the target analytes. Moreover, the relative standard deviation for the within-day and between-days repeatability were less than 7.2% and 9.9%, respectively. The method was successfully applied to the analysis of mineral water, tap water, rainwater and lake water samples. The reported protocol could overcome the need for sample filtration prior to the sample preparation of the water samples, resulting in simplification of the overall sample handling, improved data quality with minimal loss of analytes and reduced sample preparation cost.

Surface-enhanced Raman spectroscopy method for classification of doxycycline hydrochloride and tylosin in duck meat using gold nanoparticles

This paper investigated on 478 duck meat samples for the identification of 2 kinds of antibiotics, that is, doxycycline hydrochloride and tylosin, that were classified based on surface-enhanced Raman spectroscopy (SERS) combined with multivariate techniques. The optimal detection parameters, including the effects of the adsorption time, and 2 enhancement substrates (i.e., gold nanoparticles as well as gold nanoparticles and NaCl) on Raman intensities, were analyzed using single factor analysis method. The results showed that the optimal adsorption time between gold nanoparticles and analytes was 2 min, and the colloidal gold nanoparticles without NaCl as the active substrate were more conducive to enhance the Raman spectra signal. The SERS data were pretreated by using the method of adaptive iterative penalty least square method (air-PLS) and second derivative, and from which the feature vectors were extracted with the help of principal component analysis. The first four principal components scores were selected as the input values of support vector machines model. The overall classification accuracy of the test set was 100%. The experimental results showed that the combination of SERS and multivariate analysis could identify the residues of doxycycline hydrochloride and tylosin in duck meat quickly and sensitively.

Green Bioanalytical Applications of Graphene Oxide for the Extraction of Small Organic Molecules

Bioanalysis is the scientific field of the quantitative determination of xenobiotics (e.g., drugs and their metabolites) and biotics (e.g., macromolecules) in biological matrices. The most common samples in bioanalysis include blood (i.e., serum, plasma and whole blood) and urine. However, the analysis of alternative biosamples, such as hair and nails are gaining more and more attention. The main limitations for the determination of small organic compounds in biological samples is their low concentration in these matrices, in combination with the sample complexity. Therefore, a sample preparation/analyte preconcentration step is typically required. Currently, the development of novel microextraction and miniaturized extraction techniques, as well as novel adsorbents for the analysis of biosamples, in compliance with the requirements of Green Analytical Chemistry, is in the forefront of research in analytical chemistry. Graphene oxide (GO) is undoubtedly a powerful adsorbent for sample preparation that has been successfully coupled with a plethora of green extraction techniques. GO is composed of carbon atoms in a sp² single-atom layer of a hybrid connection, and it exhibits high surface area, as well as good mechanical and thermal stability. In this review, we aim to discuss the applications of GO and functionalized GO derivatives in microextraction and miniaturized extraction techniques for the determination of small organic molecules in biological samples.

A Simple Surface-Enhanced Raman Spectroscopic Method for on-Site Screening of Tetracycline Residue in Whole Milk

Therapeutic and subtherapeutic use of veterinary drugs has increased the risk of residue contamination in animal food products. Antibiotics such as tetracycline are used for mastitis treatment of lactating cows. Milk expressed from treated cows before the withdrawal period has elapsed may contain tetracycline residue. This study developed a simple surface-enhanced Raman spectroscopic (SERS) method for on-site screening of tetracycline residue in milk and water. Six batches of silver colloid nanoparticles were prepared for surface enhancement measurement. Milk-tetracycline and water-tetracycline solutions were prepared at seven concentration levels (1000, 500, 100, 10, 1, 0.1, and 0.01 ppm) and spiked with silver colloid nanoparticles. A 785 nm Raman spectroscopic system was used for spectral measurement. Tetracycline vibrational modes were observed at 1285, 1317 and 1632 cm-1 in water-tetracycline solutions and 1322 and 1621 cm-1 (shifted from 1317 and 1632 cm-1, respectively) in milk-tetracycline solutions. Tetracycline residue concentration as low as 0.01 ppm was detected in both the solutions. The peak intensities at 1285 and 1322 cm-1 were used to estimate the tetracycline concentrations in water and milk with correlation coefficients of 0.92 for water and 0.88 for milk. Results indicate that this SERS method is a potential tool that can be used on-site at field production for qualitative and quantitative detection of tetracycline residues.

The degradation of oxytetracycline during thermal treatments of chicken and pig meat and the toxic effects of degradation products of oxytetracycline on rats

The formation oxytetracycline (OTC) degradation products in chicken and pork under two different methods of cooking were studied. Samples of chicken and pig muscles previously dosed with OTC residues were subjected to boiling or microwave treatment, and the residues were extracted in a mixture of citrate buffer-MeOH (75:25 v/v), and then analyzed by high performance liquid chromatography with photodiode array detection using a XBridgeTM C18 reverse-phase chromatographic column. Thermal treatment resulted in the degradation of OTC and the concentrations of the degradation products α-apo-oxytetracycline (α-apo-OTC) and β-apo-oxytetracycline (β-apo-OTC) in muscle samples amounted to 0.7 to 1.2 % of the initial OTC content. The toxic effects of the degradation products of oxytetracycline, α-apo-OTC and β-apo-OTC were studied in rats. Male rats received oral doses of 10 mg/kg body weight/day of either α-apo-OTC, β-apo-OTC, 90 days. The results of this study suggest that the toxic effects of β-apo-OTC treatment could damage liver and kidney tissues of rats, as well as lead to the degeneration and necrosis in the hepatocytes.

Biosensors, antibiotics and food

Antibiotics are medicine's leading asset for fighting microbial infection, which is one of the leading causes of death worldwide. However, the misuse of antibiotics has led to the rapid spread of antibiotic resistance among bacteria and the development of multiple resistant pathogens. Therefore, antibiotics are rapidly losing their antimicrobial value. The use of antibiotics in food production animals is strictly controlled by the European Union (EU). Veterinary use is regulated to prevent the spread of resistance. EU legislation establishes maximum residue limits for veterinary medicinal products in foodstuffs of animal origin and enforces the establishment and execution of national monitoring plans. Among samples selected for monitoring, suspected noncompliant samples are screened and then subjected to confirmatory analysis to establish the identity and concentration of the contaminant. Screening methods for antibiotic residues are typically based on microbiological growth inhibition, whereas physico-chemical methods are used for confirmatory analysis. This chapter discusses biosensors, especially whole-cell based biosensors, as emerging screening methods for antibiotic residues. Whole-cell biosensors can offer highly sensitive and specific detection of residues. Applications demonstrating quantitative analysis and specific analyte identification further improve their potential as screening methods.

A direct competitive assay-based aptasensor for sensitive determination of tetracycline residue in honey

Tetracycline (TC) is a common antibacterial agent used for prevention and control of animal diseases. The increasing concern about TC residue in food demands high-performing analytical techniques for food quality assessment. Biosensors represent a promising tool for food safety analysis as they can fulfill some demand that the conventional methods do not attain. In this study, a novel colorimetric aptasensor was developed for sensitive detection of TC in honey. The aptasensor was based on a modified direct competitive enzyme-linked aptamer assay (dc-ELAA) scheme utilizing a 76 mer single-stranded DNA (ssDNA) aptamer selected by Systematic Evolution of Ligands by Exponential Enrichment (SELEX). The optimized aptasensor showed a good limit of detection (LOD of 0.0978 ng/mL), a wide linear range (0.1-1000 ng/mL) toward TC in honey, with good recoveries (92.09-109.7%) in TC-spiked honey, and was compared with an indirect competitive assay-based aptasensor and validated with a standard ELISA. The biosensor based on dc-ELAA with good limit of detection and simplicity can be applied for high-throughput detection of TC in food.

Development of an indirect competitive assay-based aptasensor for highly sensitive detection of tetracycline residue in honey

Tetracycline (TC) is widely used for prevention and control of animal diseases for its broad spectrum antimicrobial activity and low cost, but its abuse can seriously affect human health and may result in trade loss. Thus there is an imperative need to develop high-performing analytical technique for TC detection. In this study, we developed a biosensor based on an indirect competitive enzyme-linked aptamer assay (ic-ELAA). A 76mer single-stranded DNA (ssDNA) aptamer, selected by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), was applied for the recognition and detection of TC in honey. The limit of detection was 9.6×10(-3) ng/mL with a linear working range from 0.01 to 100 ng/mL toward TC in honey, and a mean recovery rate of 93.23% in TC-spiked honey was obtained. This aptasensor can be applied to detect TC residue in food with high sensitivity and simplicity, and it is prospective to develop useful ELAA Kits for TC determination in food.

Use of mixed-mode ion exchange sorbent for the passive sampling of organic acids by polar organic chemical integrative sampler (POCIS)

Acidic herbicides are increasingly monitored in freshwater, since their high solubility favors their rapid transfer to the water phase. Therefore, contaminant levels in the water can vary rapidly and passive sampling would be preferred over spot sampling to integrate all pollution events over a given exposure time. In this work, we propose to compare the conventional pharmaceutical polar organic chemical integrative sampler (POCIS) with modified POCISs containing two different receiving phases: a standard polystyrene divinylbenzene polymer with a higher specific surface area (Chromabond HR-X) and a mixed-mode anion exchange sorbent providing additional strong anion exchange interaction sites (Oasis MAX). Due to its hydrophobic character, Chromabond HR-X had little interaction with water (no sampling of acidic herbicides); whereas Oasis MAX provided acceptable sampling parameters (longer kinetic regime together with higher sampling rates). Additional experiments with POCIS-MAX showed no influence of nitrates on analyte uptakes, and linear isotherms reaching 10 μg L⁻¹, supporting the applicability of this device for the sampling of organic acids in continental water. The performance and reference compound (PRC) approach would be then applicable for POCIS-MAX if no competition is observed with other anions, especially organic acids (e.g., humic acids).

Development and validation of an HPLC confirmatory method for the determination of seven tetracycline antibiotics residues in milk according to the European Union Decision 2002/657/EC

An HPLC method with diode-array detection, at 355 nm, was developed and validated for the determination of seven tetracyclines (TCs) in milk: minocycline (MNC), TC, oxytetracycline (OTC), methacycline (MTC), demeclocycline (DMC), chlortetracycline (CTC), and doxycycline (DC). Oxalate buffer (pH 4) was used with 20% TCA as a deproteinization agent for the extraction of analytes from milk followed by SPE. The separation was achieved on an Inertsil ODS-3, 5 microm, 250 x 4 mm(2 )analytical column at ambient temperature. The mobile phase, a mixture of A: 0.01 M oxalic acid and B: CH(3)CN, was delivered using a gradient program. The procedure was validated according to the European Union decision 2002/657/EC determining selectivity, stability, decision limit, detection capability, accuracy, and precision. Mean recoveries of TCs from spiked milk samples (50, 100, and 200 ng/g) were 93.8-100.9% for MNC, 96.8-103.7% for OTC, 96.3-101.8% for TC, 99.4-107.2% for DMC, 99.4-102.9% for CTC, 96.3-102.7% for MTC, and 94.6-102.1% for DC. All RSD values were lower than 8.5%. The decision limits CC(a) calculated by spiking 20 blank milk samples at MRL (100 microg/kg) ranged from 101.25 to 105.84 microg/kg, while detection capability CC(b )from 103.94 to 108.88 microg/kg.

Determination of tetracycline residues in honey by CZE with ultraviolet absorbance detection

We have developed a sensitive CE method to determine eight tetracyclines (TCs) (chlortetracycline, demeclocycline, doxycycline, methacycline, minocycline, oxytetracycline, TC, and rolitetracycline (RTC)) in honey samples. The running buffer was 150 mM sodium borate (pH 9.8) and 2.5% 2-propanol with 15 s hydrodynamic injection at 25 kV. We have also developed an SPE procedure with a C18 cartridge as a clean-up step. Analytes were detected at 360 nm in less than 16 min. LODs ranged in honey from 23.9 microg/kg for TC to 49.3 microg/kg for RTC. Seven samples of Spanish honey of different floral origins were examined. None of them showed contamination with these antibiotics using the proposed method.

New materials in sorptive extraction techniques for polar compounds

This paper provides an overview of the new developments in material and format technology that improve the extraction of polar compounds in several extraction techniques. They mainly include solid-phase extraction, but there are also other sorptive extraction techniques, such as stir bar sorptive extraction and solid-phase microextraction that use either fibers or in-tube devices. We focus on new synthesised materials that are both commercially available and "in-house". Most novel materials that enhance the extraction of polar compounds are hydrophilic and have large specific surface area; however, we also cover other leading technologies, such as sol-gel or monolith. We describe the morphological and chemical properties of these new sorbents so that we can better understand them and relate them to their capability of retaining polar compounds. We discuss the extraction efficiency for polar compounds when these polymers are used as sorptive material and compare them to other materials. We also mention some representative examples of applications.

Multi-class confirmatory method for analyzing trace levels of tetracyline and quinolone antibiotics in pig tissues by ultra-performance liquid chromatography coupled with tandem mass spectrometry

An ultra-performance liquid chromatography coupled with tandem mass spectrometry (UPLC/MS/MS) method was developed to screen and confirm multi-class veterinary drug residues in pig tissues including pig kidney, liver and meat. Twenty-one drugs of two different classes including seven tetracyclines and four types of quinolones (quinoline, naphthyridine, pyridopyrimidine and cinoline) were determined simultaneously in a single run. The homogenized sample tissues were extracted with EDTA-McIlvaine buffer solution and further purified using a polymer-based Oasis HLB solid-phase extraction (SPE) cartridge. An ACQUITY UPLC BEH C18 column was used to separate the analytes followed by tandem mass spectrometry using an electrospray ionization source. MS data acquisition was performed in the positive ion multiple reaction monitoring mode, selecting two ion transitions for each target compound. Recovery studies were performed at different fortification levels. The overall average recoveries from pig muscle, kidney, and liver fortified with quinolones and tetracyclines at three levels ranged from 80.2 to 117.8% based on the use of matrix-fortified calibration with the coefficients of variation ranging from 2.1 to 17.8% (n=6). The limits of quantitation (LOQs) of quinolones and tetracyclines in different tissues ranged from 0.03-4.50 microg/kg and 0.16-10.00 microg/kg, respectively. The effects of the extraction solvent, SPE cartridge, elution solvent and sample matrix on the analyte recovery as well as the effects of the mobile phase composition and column temperature on the chromatographic behavior were also studied.

Determination of doxycycline in pharmaceuticals and human urine by micellar electrokinetic capillary chromatography

Micellar electrokinetic capillary chromatography (MEKC) was performed at 25 degrees C and 30 kV (under a pressure of 15 mbar), using 30 mM borate buffer containing 60 mM sodium dodecysulfate (SDS) and 5% (v/v) methanol as background electrolyte (pH 9.0) to determine doxycycline. UV detection was at 350 nm. The method was shown to be specific, accurate (recovery was 100.3 +/- 1.0%), linear over the tested range (correlation coefficient 0.9995) and precise (RSD <1.9%). The method was used to determine doxycycline in tablets, capsules and human urine after oral application.