Size exclusion chromatography - A blessing and a curse of science and technology of synthetic polymers

Quantitative at-line monitoring of enzymatic hydrolysis using benchtop diffusion nuclear magnetic resonance spectroscopy

Benchtop diffusion nuclear magnetic resonance (NMR) spectroscopy was used to perform quantitative monitoring of enzymatic hydrolysis. The study aimed to test the feasibility of the technology to characterize enzymatic hydrolysis processes in real time. Diffusion ordered spectroscopy (DOSY) was used to measure the signal intensity and apparent self-diffusion constant of solubilized protein in hydrolysate. The NMR technique was tested on an enzymatic hydrolysis reaction of red cod, a lean white fish, by the endopeptidase alcalase at 50°C. Hydrolysate samples were manually transferred from the reaction vessel to the NMR equipment. Measurement time was approximately 3 min per time point. The signal intensity from the DOSY experiment was used to measure protein concentration and the apparent self-diffusion constant was converted into an average molecular weight and an estimated degree of hydrolysis. These values were plotted as a function of time and both the rate of solubilization and the rate of protein breakdown could be calculated. In addition to being rapid and noninvasive, DOSY using benchtop NMR spectroscopy has an advantage compared with other enzymatic hydrolysis characterization methods as it gives a direct measure of average protein size; many functional properties of proteins are strongly influenced by protein size. Therefore, a method to give protein concentration and average size in real time will allow operators to more tightly control production from enzymatic hydrolysis. Although only one type of material was tested, it is anticipated that the method should be applicable to a broad variety of enzymatic hydrolysis feedstocks.

MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) using an 80 MHz Bench Top NMR for the Rapid Determination of Polymer and Macromolecular Molecular Weight

Measurement of molecular weight is an integral part of macromolecular and polymer characterization which usually has limitations. Herein, this article presents the use of a bench-top 80 MHz Nuclear Magnetic Resonance (NMR) spectrometer for diffusion-ordered spectroscopy as a practical and rapid approach for the determination of molecular weight/size using a novel solvent and polymer-independent universal calibration.

Evaluation of multi-solvent size exclusion chromatography columns packed with sub-2 μm particles for the characterization of synthetic polymers

With the recent development of small particle stationary-phases and dedicated instrumentation, the combination of size-exclusion chromatography (SEC) with ultra-high performance liquid chromatography (UHPLC) technology has been realized. It opened up a new polymer analysis technique called UHP-SEC. Although high resolution and fast analysis can be achieved, the multi-solvent suitability for a given column was limited to either organic or aqueous eluents. In this work, the capability of novel SEC columns (AdvanceBio SEC columns) packed with 1.9 μm particles for the characterization of synthetic polymers in organic solvents as well as the multi-solvent compatibility for organic and aqueous eluents have been demonstrated. About six times faster separation for both polystyrene (PS) and polyethylene glycol (PEG) with good peak shape and repeatability were achieved in comparison with standard SEC columns at comparable resolution. Especially for PEG, in contrast to other SEC columns, this column could provide close-to-accurate determination of molecular weights with tetrahydrofuran (THF) as mobile phase. Good reproducibility was obtained after switching several times from water to THF and vice versa with RSD% in retention times less than 0.5 %. Different samples such as polyols, isocyanates and additives can also be analyzed for molecular weight and distribution or composition determination. Volume overload, especially with injection volumes higher than 10 µL needs to be considered. This new column offers a powerful choice for oligomer and polymer analysis with both aqueous and organic mobile phase. Ultimately, hyphenating SEC columns to various detectors can enable more information regarding chemical composition, molecular weight, concentration, and structure.

High temperature-size exclusion chromatography with triple detection to assess the molecular architecture of low-density polyethylene: Insight into branching and processability correlations

In this study, three commercially available low-density polyethylene (LDPE) polymers produced via a tubular reactor process, with varying melt flow rates at 190°C/2.16 kg (4.0, 1.9, and 0.75 g/10 min), have been selected and subjected to high temperature-size exclusion chromatography (SEC) analysis coupled with an infrared-5 (IR-5), viscometer (VISCO), and multiangle laser light-scattering detectors. The molecular weight (MW), MW distribution, short-chain branching (SCB), and long-chain branching parameters were investigated. It was found that MW obtained by the universal technique (∼1.57-1.7 times) and multiangle laser light-scattering detection technique is (∼1.43-1.55 times) higher than that of the conventional calibration technique, which could be attributed to structural complexity associated with LDPEs which is not clearly understood by conventional SEC mode alone. The bulk SCB per 1000 total carbon atoms estimated by IR-5 detection was found to range from 16.50 to 17.80. On the other hand, long chain branching frequency per 1000 total carbon atoms obtained by online VISCO and multiangle laser light-scattering detection ranged from 0.46 to 0.54 and 0.65 to 0.94, respectively. Further, the significance of long chain branching parameters on the polymer processing behavior was studied in correlation with rheological property (Die swell ratio).

Two-dimensional separation of water-soluble polymers using size exclusion and reversed phase chromatography employing capillary-channeled polymer fiber columns

Polymeric materials are readily available, durable materials that have piqued the interest of many diverse fields, ranging from biomedical engineering to construction. The physiochemical properties of a polymer dictate the behavior and function, where large polydispersity among polymer properties can lead to problems; however, current polymer analysis methods often only report results for one particular property. Two-dimensional liquid chromatography (2DLC) applications have become increasingly popular due to the ability to implement two chromatographic modalities in one platform, meaning the ability to simultaneously address multiple physiochemical aspects of a polymer sample, such as functional group content and molar mass. The work presented employs size exclusion chromatography (SEC) and reversed-phase (RP) chromatography, through two coupling strategies: SEC x RP and RP x RP separations of the water-soluble polymers poly(methacrylic acid) (PMA) and polystyrene sulfonic acid (PSSA). Capillary-channeled polymer (C-CP) fiber (polyester and polypropylene) stationary phases were used for the RP separations. Particularly attractive is the fact that they are easily implemented as the second dimension in 2DLC workflows due to their low backpressure (<1000 psi at ∼70 mm sec^-1) and fast separation times. In-line multi-angle light scattering (MALS) was also implemented for molecular weight determinations of the polymer samples, with the molecular weight of PMA ranging from 5 × 10⁴ to 2 × 10⁵ g mol^-1, while PSSA ranges from 10⁵ to 10⁸ g mol^-1. While the orthogonal pairing of SEC x RP addresses polymer sizing and chemistry, this approach is limited by long separation times (80 min), the need for high solute concentrations (PMA = 1.79 mg mL^-1 and PSSA = 0.175 mg mL^-1 to yield comparable absorbance responses) due to on-column dilution and subsequently limited resolution in the RP separation space. With RP x RP couplings, separation times were significantly reduced (40 min), with lower sample concentrations (0.595 mg mL^-1 of PMA and 0.05 mg mL^-1 of PSSA) required. The combined RP strategy provided better overall distinction in the chemical distribution of the polymers, yielding 7 distict species versus 3 for the SEC x RP coupling.

Polymer Molecular Weights via DOSY NMR

Diffusion-ordered spectroscopy (DOSY) ¹H nuclear magnetic resonance (¹H NMR) has become a powerful tool to characterize the molecular weights of polymers. Compared to common characterization techniques, such as size exclusion chromatography (SEC), DOSY is faster, uses less solvent, and does not require a purified polymer sample. Poly(methyl methacrylate) (PMMA), polystyrene (PS), and polybutadiene (PB) molecular weights were determined by the linear correlation between the logarithm of their diffusion coefficients (D) and the logarithm of their molecular weights based on SEC molecular weights. Here, we emphasize the importance of the preparation needed to generate the calibration curves, which includes choosing the correct pulse sequence, optimizing parameters, and sample preparation. The limitation of the PMMA calibration curve was investigated by increasing the dispersity of PMMA. Additionally, by accounting for viscosity in the Stokes-Einstein equation, a variety of solvents were used to produce a "universal" calibration curve for PMMA to determine molecular weight. Furthermore, we place a spotlight on the increasing importance of DOSY NMR being incorporated into the polymer chemist's toolbox.

Identification and quantification of polymeric impurity in block copolymer by one-dimensional and two-dimensional liquid chromatography coupled to high-resolution mass spectrometry and evaporative light scattering detector

Identifying and quantifying polymeric impurities in a polymeric material is critical for understanding material quality and performance, but it remains a challenge requiring developing new characterization methods. In this work, a comprehensive two-dimensional liquid chromatography method with simultaneous evaporative light scattering and high-resolution mass spectrometry detection was developed to separate and identify a polymeric impurity in alkyl alcohol-initiated polyethylene oxide/polybutylene oxide diblock copolymer. Size exclusion chromatography was implemented in the first dimension, and gradient reversed-phase liquid chromatography using a large-pore C4 column was applied in the second dimension using an active solvent modulation valve as the interface to minimize the polymer breakthrough. The two-dimensional separation significantly reduced the complexity of the mass spectra data compared to the one-dimensional separation, and the combination of retention time and mass spectral interpretation led to the successful identification of the water-initiated triblock copolymer impurity. This identification was confirmed by comparison with the synthesized triblock copolymer reference material. A one-dimensional LC method with evaporative light scattering detection was employed to quantify the triblock impurity. The impurity level in three samples made with the different processes was determined to be in the range of 9-18 wt% using the triblock reference material as the standard.

Modeling the Phase Equilibria of Associating Polymers in Porous Media with Respect to Chromatographic Applications

Associating copolymers self-assemble during their passage through a liquid chromatography (LC) column, and the elution differs from that of common non-associating polymers. This computational study aims at elucidating the mechanism of their unique and intricate chromatographic behavior. We focused on amphiphilic diblock copolymers in selective solvents, performed the Monte Carlo (MC) simulations of their partitioning between a bulk solvent (mobile phase) and a cylindrical pore (stationary phase), and investigated the concentration dependences of the partition coefficient and of other functions describing the phase behavior. The observed abruptly changing concentration dependences of the effective partition coefficient demonstrate the significant impact of the association of copolymers with their partitioning between the two phases. The performed simulations reveal the intricate interplay of the entropy-driven and the enthalpy-driven processes, elucidate at the molecular level how the self-assembly affects the chromatographic behavior, and provide useful hints for the analysis of experimental elution curves of associating polymers.

Chromatographic separation of active polymer-like worm mixtures by contour length and activity

The convective transport rate of polymers through confined geometries depends on their size, allowing for size-based separation of polymer mixtures (chromatography). Here, we investigate whether mixtures of active polymers can be separated in a similar manner based on their activity. We use thin, living Tubifex tubifex worms as a model system for active polymers and study the transport of these worms by an imposed flow through a channel filled with a hexagonal pillar array. The transport rate through the channel depends strongly on the degree of activity, an effect that we assign to the different distribution of conformations sampled by the worms depending on their activity. Our results demonstrate a unique way to sort mixtures of active polymers based on their activity and provide a versatile and convenient experimental system to investigate the hydrodynamics of active polymers.

Amylose Inter-Chain Entanglement and Inter-Chain Overlap Impact Rice Quality

Retrogradation of cooked rice happens in two ways: one is by the formation of ordered structures, and the other is through intra- and inter-chain entanglement and inter-chain overlap, which in turn are affected by the amylose chain-length distribution. Both entanglement and overlap could affect rice texture. Here, four amylose samples were isolated from starch by precipitation from a dimethyl sulfoxide solution with butan-1-ol and isoamyl alcohol. Following enzymatic debranching, they were then characterized using size-exclusion chromatography. Amylose solutions (10%, m/v) were made by dissolving amylose in 90% (v/v) DMSO. Amylose gels (10%, w/v) were made by dissolving amylose powders into hot water, followed by cooling. The rigidity of the amylose gels and the structural order were measured using a texture analyzer and X-ray diffractometer, respectively. In the amylose solution, for a given mass of polymer in a fixed amount of solvent, the total occupied volume was reduced when the polymer molecular weight was smaller, resulting in less inter-chain overlap and a lower viscosity of the amylose solution. The overall mobility and diffusion of the molecules were inversely related to the square of the molecular weight until the gelation concentration. Thus, amylose gels in which amylose had a lower molecular weight had a greater chance to permeate into other molecules, which counterintuitively led to more inter-chain entanglement and more rigid amylose gels during retrogradation. This information could help rice breeders improve rice quality by using the molecular structure of starch as a guide.

Size-Exclusion Chromatography: A Twenty-First Century Perspective

Now in its sixth decade, size-exclusion chromatography (SEC) remains the premier method by which to determine the molar mass averages and distributions of natural and synthetic macromolecules. Aided by its coupling to a variety and multiplicity of detectors, it has also shown its ability to characterize a host of other physicochemical properties, such as branching, chemical, and sequence length heterogeneity size distribution; chain rigidity; fractal dimension and its change as a function of molar mass; etc. SEC is also an integral part of most macromolecular two-dimensional separations, providing a second-dimension size-based technique for determining the molar mass of the components separated in the first dimension according to chemical composition, thus yielding the combined chemical composition and molar mass distributions of a sample. While the potential of SEC remains strong, our awareness of the pitfalls and challenges inherent to it and to its practice must also be ever-present. This Perspective aims to highlight some of the advantages and applications of SEC, to bring to the fore these caveats with regard to its practice, and to provide an outlook as to potential areas for expansion and growth.

Solvent-Independent Molecular Weight Determination of Polymers Based on a Truly Universal Calibration

Diffusion-ordered NMR spectroscopy (DOSY) allows for accurate molecular weight calibration and determination that can be corrected for solvent influences. Polystyrene and poly(ethylene glycol) standards have been used to calibrate DOSY diffusion data for a variety of solvents, showing a high correlation of data when the bulk viscosity of the solvent is accounted for following the Stokes-Einstein equation. In this way, a type of universal calibration is introduced that allows for determinations of average molecular weight that are at least as accurate as those of traditional size-exclusion chromatography (SEC), if not better. Further, we demonstrate that DOSY calibrations can be used between laboratories, hence removing the need for individual calibration of setups as currently done.

High-Throughput and Combinatorial Approaches for the Development of Multifunctional Polymers

High-throughput (HT) development of new multifunctional polymers is accomplished by the combination of different HT tools established in polymer sciences in the last decade. Important advances are robotic/HT synthesis of polymer libraries, the HT characterization of polymers, and the application of spatially resolved polymer library formats, explicitly microarray and gradient libraries. HT polymer synthesis enables the generation of material libraries with combinatorial design motifs. Polymer composition, molecular weight, macromolecular architecture, etc. may be varied in a systematic, fine-graded manner to obtain libraries with high chemical diversity and sufficient compositional resolution as model systems for the screening of these materials for the functions aimed. HT characterization allows a fast assessment of complementary properties, which are employed to decipher quantitative structure-properties relationships. Moreover, these methods facilitate the HT determination of important surface parameters by spatially resolved characterization methods, including time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy. Here current methods for the high-throughput robotic synthesis of multifunctional polymers as well as their characterization are presented and advantages as well as present limitations are discussed.

Evaporation-Induced Diffusion Acceleration in Liquid-Filled Porous Materials

Liquid-filled porous materials exist widely in nature and engineering fields, with the diffusion of substances in them playing an important role in system functions. Although surface evaporation is often inevitable in practical scenarios, the evaporation effects on diffusion behavior in liquid-filled porous materials have not been well explored yet. In this work, we performed noninvasive diffusion imaging experiments to observe the diffusion process of erioglaucine disodium salt dye in a liquid-filled nitrocellulose membrane under a wide range of relative humidities (RHs). We found that evaporation can significantly accelerate the diffusion rate and alter concentration distribution compared with the case without evaporation. We explained the accelerated diffusion phenomenon by the mechanism that evaporation would induce a weak flow in liquid-filled porous materials, which leads to convective diffusion, i.e., evaporation-induced flow and diffusion (EIFD). Based on the EIFD mechanism, we proposed a convective diffusion model to quantitatively predict the diffusion process in liquid-filled porous materials under evaporation and experimentally validated the model. Introducing the dimensionless Peclet (P _e) number to measure the relative contribution of the evaporation effect to pure molecular diffusion, we demonstrated that even at a high RH of 95%, where the evaporation effect is usually assumed negligible in common sense, the evaporation-induced diffusion still overwhelms the molecular diffusion. The flow velocity induced by evaporation in liquid-filled porous materials was found to be 0.4-5 μm/s, comparable to flow in many biological and biomedical systems. The present analysis may help to explain the driving mechanism of tissue perfusion and provide quantitative analysis or inspire new control methods of flow and material exchange in numerous cutting-edge technologies, such as paper-based diagnostics, hydrogel-based flexible electronics, evaporation-induced electricity generation, and seawater purification.

Fast and efficient single step liquid chromatography separation of parent homopolymers from block copolymers

The modified layout of the barrier method called liquid chromatography under limiting conditions of enthalpic interactions is presented. It enables automated quantitative separation of blends of synthetic polymers, for example the single step discrimination of both parent homopolymers from the block copolymers. Moreover, this method enables the estimation of molar mass and molar mass distribution of the block copolymer precursor. Adjacent large sequences of mobile phase of different composition are applied as barriers. They are created by a computer controlled pair of pumping systems in the form of longitudinal profiles along the column. The home synthesized block copolymers polystyrene-block-poly(2-vinylpyridine) served as model examples of the method application. The adsorption retention mechanism was exploited using mesoporous bare silica gel column packing. Series of block copolymers of similar composition can be quickly handled with the method to optimize their synthesis.

Temperature Gradient Interaction Chromatography: A Perspective

The application of temperature gradient interaction chromatography (TGIC) as an advanced technique for the characterisation of polymers is discussed, in comparison to other liquid chromatography techniques and in particular the ubiquitous size exclusion chromatography. Specifically, the use of reversed-phase TGIC for the interrogation of complex branched polymers and normal-phase TGIC for characterisation of high-molar mass end-functionalised polymers is highlighted.

Molecular Characterization of Polymer Networks

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Pre-targeting with ultra-small nanoparticles: boron carbon dots as drug candidates for boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a promising cancer treatment exploiting the neutron capture capacity and subsequent fission reaction of boron-10. The emergence of nanotechnology has encouraged the development of nanocarriers capable of accumulating boron atoms preferentially in tumour cells. However, a long circulation time, required for high tumour accumulation, is usually accompanied by accumulation of the nanosystem in organs such as the liver and the spleen, which may cause off-target side effects. This could be overcome by using small-sized boron carriers via a pre-targeting strategy. Here, we report the preparation, characterisation and in vivo evaluation of tetrazine-functionalised boron-rich carbon dots, which show very fast clearance and low tumour uptake after intravenous administration in a mouse HER2 (human epidermal growth factor receptor 2)-positive tumour model. Enhanced tumour accumulation was achieved when using a pretargeting approach, which was accomplished by a highly selective biorthogonal reaction at the tumour site with trans-cyclooctene-functionalised Trastuzumab.

Polymeric stationary phases for size exclusion chromatography: A review

Synthetic and natural macromolecules are commonly used in a variety of fields such as plastics, nanomedicine, biotherapeutics, drug delivery and tissue engineering. Characterising macromolecules in terms of their structural parameters (size, molar mass and distribution, architecture) is key to have a better understanding of their structure-property relationships. Size exclusion chromatography (SEC) is a commonly used technique for polymer characterization since it offers access to the determination of the size of a macromolecule, its molar mass and the molar mass distribution. Moreover, detectors that allow the determination of true molar masses, macromolecule's architecture and the composition of copolymers can be coupled to the chromatographic system. Like other chromatographic techniques, the stationary phase is of paramount importance for efficient SEC separations. This review presents the basic principles for the design of stationary phases for SEC as well as synthetic methods currently used in the field. Current status of fully-porous polymeric stationary phases used in SEC is reviewed and their advantages and limitations are also discussed. Finally, the potential of polymer monoliths in SEC is also covered, highlighting the limitations this column technology could address. However, further development in the polymer structure is needed to consider this column technology in the field of macromolecule separation.

High-molecular weight impurity screening by size-exclusion chromatography on a reversed-phase column

Monitoring polymerization events leading to the discovery of new high-molecular weight (MW) impurities is challenging during chemical syntheses of active pharmaceutical ingredients. Employing reversed-phase chromatography (RPC) stationary phases (SPs) in size-exclusion chromatography (SEC) mode could be a potential solution given their high efficiency, sensitivity, and extensive solvent compatibility. However, there is a lack of generalized means for trace polymeric impurities across a wide range of physicochemical properties. Herein, we developed a SEC-based approach with a C18 SP for screening such high-MW impurities. Seven polymer standards presenting a variety of functional groups, consisting of hydrophobic, heterocyclic, ionic, and neutral hydrophilic moieties, were utilized as model impurities to establish the screening conditions. Nine mobile phases (tetrahydrofuran-based, buffered methanol, and buffered acetonitrile) were proposed to cover all model polymers and a majority of potential high-MW impurities in small molecule chemical syntheses. The established screening system demonstrated a linearity of 0.05-1.0 % w/w (R²>0.99) for the selected model impurities with proper elution conditions. Two real high-MW impurities, BMT-041910 (polymeric degradation) and poly(phenyl thiirane) (by-product polymerization), were identified from the proposed high-MW impurity screening. The successful conditions yielded a quantitative limit better than 0.1 % w/w in both cases. We believe the developed screening platform is applicable to the analysis of a wide variety of unknown high-MW impurities of low abundance potentially generated during drug substance development.

The Influence of the Mixed DPC:SDS Micelle on the Structure and Oligomerization Process of the Human Cystatin C

Human cystatin C (hCC), a member of the superfamily of papain-like cysteine protease inhibitors, is the most widespread cystatin in human body fluids. Physiologically active hCC is a monomer, which dimerization and oligomerization lead to the formation of the inactive, insoluble amyloid form of the protein, strictly associated with cerebral amyloid angiopathy, a severe state causing death among young patients. It is known, that biological membranes may accelerate the oligomerization processes of amyloidogenic proteins. Therefore, in this study, we describe an influence of membrane mimetic environment-mixed dodecylphosphocholine:sodium dodecyl sulfate (DPC:SDS) micelle (molar ratio 5:1)-on the effect of the hCC oligomerization. The hCC-micelle interactions were analyzed with size exclusion chromatography, circular dichroism, and nuclear magnetic resonance spectroscopy. The experiments were performed on the wild-type (WT) cystatin C, and two hCC variants-V57P and V57G. Collected experimental data were supplemented with molecular dynamic simulations, making it possible to highlight the binding interface and select the residues involved in interactions with the micelle. Obtained data shows that the mixed DPC:SDS micelle does not accelerate the oligomerization of protein and even reverses the hCC dimerization process.

Broken Rice as a Potential Functional Ingredient with Inhibitory Activity of Renin and Angiotensin-Converting Enzyme(ACE)

The aim of this work was to evaluate the ability of broken rice, an underutilized industrial by-product, as a potential functional and health promoting ingredient. With this purpose, the ability to inhibit the angiotensin converting enzyme and renin of a rice protein hydrolyzate (RPH) obtained from a high-protein variety of broken rice (var. Nutriar FCAyF) was analyzed (IC₅₀ = 0.87 and 2.7 mg/mL, respectively). RPH was separated by gel permeation chromatography and in a second purification step by RP-HPLC. The sequence of antihypertensive peptides presented in two RP-HPLC fractions was analyzed. Peptides capable of interacting with the active sites of both enzymes were identified. In this study, we demonstrate that the hydrolysis treatment improves functional and biological properties of rice proteins. Protein preparations obtained from a by-product of rice industry, such as broken rice, are a promising ingredient with potentially good biological properties.

Recent advances in the analysis of polysialic acid from complex biological systems

Polysialic acid (polySia) is a unique, well-characterised carbohydrate polymer highly-expressed on the cell surface of neurons in the early stages of mammalian brain development. Post-embryogenesis, it is also re-expressed in a number of tumours of neuroendocrine origin. It plays important roles in modulating cell-cell, and cell-matrix adhesion and migration, tumour invasion and metastasis. Techniques for structural and quantitative characterisation of polySia from tumours and cancer cells are thus essential in exploring the relationship between polySia expression levels and structural and functional changes associated with cancer progression and metastasis. A variety of techniques have been developed to structurally and quantitatively analyse polySia in clinical tissues and other biological samples. In this review, analytical approaches used for the determination of polySia in biological matrices in the past 20 years are discussed, with a particular focus on chemical approaches, and quantitative analysis.

Controlled Shape and Porosity of Polymeric Colloids by Photo-Induced Phase Separation

The shape and porosity of polymeric colloids are two properties that highly influence their ability to accomplish specific tasks. For micro-sized colloids, the control of both properties was demonstrated by the photo-induced phase separation of droplets of NOA81—a thiol-ene based UV-curable adhesive—mixed with acetone, water, and polyethylene glycol. The continuous phase was perfluoromethyldecalin, which does not promote phase separation prior to UV activation. A profound influence of the polymer concentration on the particle shape was observed. As the photo-induced phase separation is triggered by UV radiation, polymerization drives the extracted solution out of the polymeric matrix. The droplets of the extracted solution coalesce until they form a dimple correlated to the polymer concentration, significantly changing the shape of the formed solid colloids. Moreover, control could be gained over the porosity by varying the UV intensity, which governs the kinetics of the reaction, without changing the chemical composition; the number of nanopores was found to increase significantly at higher intensities.

Degree of branching in poly(acrylic acid) prepared by controlled and conventional radical polymerization

Poly(acrylic acid)s, PAAs and poly(sodium acrylate)s, PNaAs were characterized in detail.

Strengths and limitations of size exclusion chromatography for investigating single chain folding – current status and future perspectives

Synthetic approaches for Single-Chain Nanoparticles (SCNPs) developed rapidly during the last decade, opening a multitude of avenues for the design of functional macromolecular chains able to collapse into defined nanoparticles. However, the analytical evaluation of the SCNP formation process still requires critical improvements.

Bioconjugation in Drug Delivery: Practical Perspectives and Future Perceptions

For the past three decades, pharmaceutical research has been mainly converging to novel carrier systems and nanoparticulate colloidal technologies for drug delivery, such as nanoparticles, nanospheres, vesicular systems, liposomes, or nanocapsules to impart novel functions and targeting abilities. Such technologies opened the gate towards more sophisticated and effective multi-acting platform(s) which can offer site-targeting, imaging, and treatment using a single multifunctional system. Unfortunately, such technologies faced major intrinsic hurdles including high cost, low stability profile, short shelf-life, and poor reproducibility across and within production batches leading to harsh bench-to-bedside transformation.Currently, pharmaceutical industry along with academic research is investing heavily in bioconjugate structures as an appealing and advantageous alternative to nanoparticulate delivery systems with all its flexible benefits when it comes to custom design and tailor grafting along with avoiding most of its shortcomings. Bioconjugation is a ubiquitous technique that finds a multitude of applications in different branches of life sciences, including drug and gene delivery applications, biological assays, imaging, and biosensing.Bioconjugation is simple, easy, and generally a one-step drug (active pharmaceutical ingredient) conjugation, using various smart biocompatible, bioreducible, or biodegradable linkers, to targeting agents, PEG layer, or another drug. In this chapter, the different types of bioconjugates, the techniques used throughout the course of their synthesis and characterization, as well as the well-established synthetic approaches used for their formulation are presented. In addition, some exemplary representatives are outlined with greater emphasis on the practical tips and tricks of the most prominent techniques such as click chemistry, carbodiimide coupling, and avidin-biotin system.