Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Molecularly Imprinted Polymers Using Yeast as a Supporting Substrate

Molecularly imprinted polymers (MIPs) have gained significant attention as artificial receptors due to their low cost, mild operating conditions, and excellent selectivity. To optimize the synthesis process and enhance the recognition performance, various support materials for molecular imprinting have been explored as a crucial research direction. Yeast, a biological material, offers advantages such as being green and environmentally friendly, low cost, and easy availability, making it a promising supporting substrate in the molecular imprinting process. We focus on the preparation of different types of MIPs involving yeast and elaborate on the specific roles it plays in each case. Additionally, we discuss the advantages and limitations of yeast in the preparation of MIPs and conclude with the challenges and future development trends of yeast in molecular imprinting research.

Factors Affecting the Analytical Performance of Magnetic Molecularly Imprinted Polymers

During the last few years, separation techniques using molecular imprinting polymers (MIPs) have been developed, making certain improvements using magnetic properties. Compared to MIP, Magnetic molecularly imprinted polymers (MMIPs) have high selectivity in sample pre-treatment and allow for fast and easy isolation of the target analyte. Its magnetic properties and good extraction performance depend on the MMIP synthesis step, which consists of 4 steps, namely magnetite manufacture, magnetic coating using modified components, polymerization and template desorption. This review discusses the factors that will affect the performance of MMIP as a selective sorbent at each stage. MMIP, using Fe₃O₄ as a magnetite core, showed strong superparamagnetism; it was prepared using the co-precipitation method using FeCl₃·6H₂O and FeCl₂·H₂O to obtain high magnetic properties, using NH₄OH solution added for higher crystallinity. In magnetite synthesis, the use of a higher temperature and reaction time will result in a larger nanoparticle size and high magnetization saturation, while a higher pH value will result in a smaller particle size. In the modification step, the use of high amounts of oleic acid results in smaller nanoparticles; furthermore, determining the correct molar ratio between FeCl₃ and the shielding agent will also result in smaller particles. The next factor is that the proper ratio of functional monomer, cross-linker and solvent will improve printing efficiency. Thus, it will produce MMIP with high selectivity in sample pre-treatment.

Magnetic Molecularly Imprinted Polymers: An Update on Their Use in the Separation of Active Compounds from Natural Products

During the last few years, separation techniques using molecularly imprinted polymers (MIPs) have been developed, making breakthroughs using magnetic properties. Compared to conventional MIPs, magnetic molecularly imprinted polymers (MMIPs) have advantages in sample pretreatment due to their high specificity and selectivity towards analytes as a result of their larger specific surface areas and highly accessible specific binding sites. The techniques of isolation of active compounds from natural products usually require very long process times and low compound yields. When MMIPs are used in sample separation as Solid Phase Extraction (SPE) sorbents, the MMIPs are introduced into the dissolved sample and spread evenly, and they form bonds between the analyte and the MMIPs, which are then separated from the sample matrix using an external magnetic field. This process of separating analytes from the sample matrix makes the separation technique with MMIPs very simple and easy. This review discusses how to synthesize MMIPs, which factors must be considered in their synthesis, and their application in the separation of active compounds from natural products. MMIPs with magnetic core-shells made by co-precipitation can be a good choice for further development due to the high synthesis yield. Further optimization of the factors affecting the size and distribution of magnetic core-shell particles can obtain higher synthesis yields of MMIPs with higher adsorption capacity and selectivity. Thus, they can isolate target compounds from natural plants in high yields and purity.

Preparation of porous carbon-based molecularly imprinted polymers for separation of triazine herbicides in corn

A synthesis route of using cellulose as the precursor to prepare porous carbon (PC) had been established in this study. The as-prepared PC was introduced as carriers in the synthesis process of porous carbon-molecularly imprinted polymers (PC-MIPs), which greatly improved the absorption capacity of MIPs. Triazine pesticides in corn were extracted with matrix solid-phase dispersion (MSPD) using the PC-MIPs as dispersants and determined by ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Under the optimal MSPD condition for extracting six kinds of triazines (simazine, terbutryn, simetryne, prometryne, ametryn, and atrazine), the detection limits were 0.005-0.02 ng g^-1, while the precisions were 1.2-5.9%, and the recoveries were 92.6-104.7%. The method has been extensively applied to analyze various corn samples. Atrazine residue (1.2 μg kg^-1) was detected in one corn sample, which was lower than the maximum residual limit indicated by the Chinese stated standards (50 μg kg^-1).

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Construction of natural polymeric imprinted materials and their applications in water treatment: A review

Molecularly imprinted materials (MIMs) have been widely used in various fields, including water treatment, chemical sensing, and biotechnology, because of their specific recognition and high selectivity. MIMs are usually obtained via two successive steps, namely, (1) copolymerization and crosslinking reactions of the preassembled complex of comonomers and a specific target compound (2) and thorough removal of template molecules. Some functional polymers are directly used as supporting materials and functional groups assembled with target compound are provided to simplify the preparation of MIMs. Natural polymers, such as chitosan, cyclodextrin, sodium alginate, starch, cellulose, lignin and their derivatives, are good candidates because of their environmentally friendly properties, low costs, and abundant active functional groups. In this study, different methods for the preparation of natural polymeric MIMs were reviewed in terms of the construction of microscopic binding cavities and macroscopic visible condensed structures with different shapes. Natural polymeric MIMs in water treatment applications, such as adsorption and detection of various pollutants from aqueous solutions, were summarized. Prospects on the development of novel and high-performance natural polymeric MIMs were discussed to overcome the difficulties in their preparation and applications.

Review of Sample Preparation Techniques for the Analysis of Selected Classes of Pesticides in Plant Matrices

The aim of this article is to present the trends in extraction techniques applied for the isolation of pesticides from plant matrix. To fully compare the effectiveness of different extraction techniques, it was required to analyze compounds with possibly wide spectrum of physicochemical properties. Hence, compounds representing neonicotinoids, pyrethroids, sulfonylureas and phenylamides were selected. Based on literature studies, it may be concluded that there are three main approaches to make the analytical procedures for pesticides determination more effective: (i) the optimization of extraction conditions, however, according to ANOVA conducted on the collected literature data, not all parameters influence the extraction process equally; chemometric studies based on literature reports may lead to the conclusion that the most favorable conditions (criterion: analyte recovery, repeatability) for neonicotinoid, pyrethroid and sulfonylurea herbicide extraction from plant tissues are provided by QuEChERS - extraction with acetonitrile, while the mixtures of PSA and GCB (for neonicotinoids), and PSA, GCB, C18 (for pyrethroids) should be used in d-SPE step. For sulfonylurea compounds and metalaxyl it was impossible to identify a sorbent(s) that cleans up the extract more effectively than the others; (ii) to develop a new generation of sorbents; however, the range of their applicability is limited, mainly due to difficulties in their synthesis; (iii) to develop the new extraction techniques with as few "trouble spots" as possible.

Polymeric Nanoparticle-Coated Pickering Emulsion-Synthesized Conducting Polyaniline Hybrid Particles and Their Electrorheological Study

To produce an electric stimuli-responsive electrorheological (ER) material, semiconducting core/shell-type polyaniline (PANI) hybrid particles were fabricated through Pickering emulsion-type polymerization, using poly(divinylbenzene-alt-maleic anhydride) (PDVMA) particles as a solid surfactant. The PDVMA nanoparticles were initially polymerized using a self-stable precipitation method. The fabricated PANI/PDVMA composite particles were subjected to various chemical characterizations; further, they were suspended in silicone oil at 10 vol % to prepare an ER fluid, and their viscoelastic behaviors were scrutinized using a rheometer under various input electric fields. We also adopted an LCR meter to evaluate its dielectric characteristics. Our results showed that the PANI/PDVMA composite particles display typical ER performance, such that both dynamic and elastic yield stresses follow a polarization mechanism with a slope of 2.0.

Recent Studies of Pickering Emulsions: Particles Make the Difference

In recent years, emulsions stabilized by micro- or nanoparticles (known as Pickering emulsions) have attracted much attention. Micro- or nanoparticles, as the main components of the emulsion, play a key role in the preparation and application of Pickering emulsions. The existence of particles at the interface between the oil and aqueous phases affects not only the preparation, but also the properties of Pickering emulsions, affording superior stability, low toxicity, and stimuli-responsiveness compared to classical emulsions stabilized by surfactants. These advantages of Pickering emulsions make them attractive, especially in biomedicine. In this review, the effects of the characteristics of micro- and nanoparticles on the preparation and properties of Pickering emulsions are introduced. In particular, the preparation methods of Pickering emulsions, especially uniform-sized emulsions, are listed. Uniform Pickering emulsions are convenient for both mechanistic research and applications. Furthermore, some biomedical applications of Pickering emulsions are discussed and the problems hindering their clinical application are identified.

The combination of adsorption by functionalized halloysite nanotubes and encapsulation by polyelectrolyte coatings for sustained drug delivery

A novel organic–inorganic hybrid nanocomposite was established for the sustained release of an analgesic.

A new magnetic tailor made polymer for separation and trace determination of cadmium ions by flame atomic absorption spectrophotometry

Magnetic ion imprinted polymers have been prepared and applied for the selective extraction and trace monitoring of cadmium ions in food samples.

Molecularly imprinted polymeric micro- and nano-particles for the targeted delivery of active molecules

Molecular imprinting (MI) represents a strategy to introduce a 'molecular memory' in a polymeric system obtaining materials with specific recognition properties. MI particles can be used as drug delivery systems providing a targeted release and thus reducing the side effects. The introduction of molecular recognition properties on a polymeric drug carrier represents a challenge in the development of targeted delivery systems to increase their efficiency. This review will summarize the limited number of drug delivery MI particles described in the literature along with an overview of potential solutions for a larger exploitation of MI particles as targeted drug delivery carriers. Molecularly imprinted drug carriers can be considered interesting candidates to significantly improve the efficiency of a controlled drug treatment.