Advancements in effervescent-assisted dispersive micro-solid phase extraction for the analysis of emerging pollutants

Emerging pollutants pose an increasing threat to the environment and human well-being, requiring substantial progress in analytical methodologies. Dispersive micro-solid phase extraction (μ-dSPE) has proven successful in detecting and measuring these contaminants, particularly in trace quantities. However, challenges persist in achieving a uniform sorbent distribution and efficient separation from the sample matrix. To address these issues, effervescent-assisted dispersive micro-solid phase extraction (EA-μ-dSPE) was developed. This method uses on-site produced carbon dioxide as a dispersing agent, eliminating the need for vortexing or ultrasonication. Due to the sorbent dispersion in the sample solution, the contact surface between the analyte and the sorbent increases, resulting in increased extraction efficiency, reduced extraction time, and promotes of sustainability. Several parameters are critical to the successful execution of this procedure to extract the analytes, including the type and structure of sorbent, composition of dispersing agents, sorbent separation procedure, and type and properties of desorption solvents. The sorbent plays a critical role in successful extraction of emerging pollutants. It is clear that for the extraction of the analyte on the sorbent, proper interaction must be established between the analyte and the sorbent via physical and chemical interactions. This review thoroughly evaluates the underlying principles of the approach, its potential, and the significant advancements that have been documented. It explores the method's capacity to analyse and identify emerging pollutants, emphasising its potential across various sample matrices for enhanced pollutant identification and quantification.

Implementation of simple and effective fine droplet formation-based spray-assisted liquid phase microextraction for the simultaneous determination of twenty-nine endocrine disruptor compounds and pesticides in rock, soil, water, moss, and feces samples from antarctica using gas chromatography-mass spectrometry

This study established the simultaneous determination of the selected endocrine-disrupting compounds (EDCs) and pesticides in rock, soil, water, moss, and feces samples collected from the Antarctic region. The spray-assisted droplet formation-based liquid phase microextraction (SADF-LPME) coupled to GC-MS system was developed and validated for the screening and monitoring of 29 selected EDCs and pesticides. Binary solvent system, 1:1 (v/v) dichlormethane: 1,2-dichloroethane mixture was employed as an extraction solvent and sprayed onto sample or standard solutions using a straightforward and practical spray apparatus. The factors affecting the extraction process such as extraction solvent type and ratio, extraction solvent volume (spray repetition), vortexing period, and sample pH were properly optimized. Analytical figures of the merit of the method were recorded under the optimal extraction/chromatographic conditions. The LOD, LOQ, and enhancement factor were in the range of 1.0 to 6.6 ng/g, 3.2 to 22.1 ng/g, and 3.7 to 158.9, respectively. The method demonstrated a good linear working range for all the selected analytes with proper coefficients of determination. The usability and reliability of the microextraction strategy was confirmed using seawater, moss, and soil samples, and the %recoveries were within an acceptable range (> 70%) for all examined samples. The environmental samples collected from the Horseshoe and Faure Islands of the Antarctica region were analyzed to assess the potential pollution of EDCs and pesticides. This method has the potential to be employed for the analysis of EDCs in routine analytical laboratories and for controlling and screening the organic pollutant content of different environmental samples.

Effervescent powder-assisted floating organic solvent-based dispersive liquid-liquid microextraction for determination of organochlorine pesticides in water by GC-MS

An effervescent powder-assisted floating organic solvent-based dispersive liquid-liquid microextraction was introduced for determination of 13 organochlorine pesticides in water samples. In this method, a less toxic low-density organic solvent was used as extraction solvent. The extraction solvent was dispersed in to the aqueous sample via CO2 bubbles, in-situ generated up on addition of water to a falcon tube containing the mixture of effervescent powder precursors as well as the extraction solvent. Various experimental parameters such as effervescent and its weight fractions, extraction solvent type and its volume, the total mass of effervescent precursors, and the effect of salt were investigated and the optimal conditions were established. Under the optimum conditions, the proposed method exhibited good linearity for all target pesticides with the coefficient of determinations varying from 0.9981 to 0.9997. The limits of detection and quantification were within the range of 0.03-0.24 and 0.26-0.75 μg/L, respectively. The intra- and inter-day precisions which were expressed in terms of the relative standard deviation ranged from 0.33 to 4.47 and 0.51-5.52%, respectively. The enrichment factors and recoveries ranged from 24 to 293 and 76-116%, respectively. The proposed method could be used simple, cheap, fast, and environmentally friendly alternative for analysis of organochlorine pesticides from environmental water and other similar matrices.

Magnetic amino-functionalized metal-organic frameworks as a novel solid support in ionic liquids-based effervescent tablets for efficient extraction of polycyclic aromatic hydrocarbons in milks

Herein, a kind of novel multi-layer core-shell nanocomposites (NSPN) was prepared by employing SiO₂ and polyvinylpyrrolidone (PVP) polymers as modifiers and amino-functionalized metal-organic frameworks (NH₂-MIL101(Fe)) as coating. It was referred to as the NSPN and ILs-based effervescence-assisted dispersive solid-phase microextraction, hereafter abbreviated as NIE-DSM. In terms of extraction efficiency, SiO₂ and PVP as modifiers and NH₂-MIL(Fe) as coating onto the surface of NiFe₂O₄ cores played a synergistically enhancing effect on adsorption/extraction. Effervescent tablets were prepared by integrating the NSPN magnetic nanoparticles as adsorbents with imidazolium-based ionic liquids (ILs) as extractants as well as acidic and alkaline sources. Under vigorous dispersion of CO₂ bubbles, the NIE-DSM method realized the goal of rapidly diffusing and separating the adsorbent/extractant (~3 min) without needing conventional vortexing or centrifugation step. Consequently, the NIE-DSM approach combined dispersion and adsorption/extractant in a synchronous way. Under optimized conditions, the NIE-DSM/HPLC-FLD method gave low limits of detection (0.008-0.034 μg kg^-1) and satisfactory extraction recoveries (74.1-101.6%) for five polycyclic aromatic hydrocarbons (PAHs; fluorene, anthracene, pyrene, chrysene and benzo(a)pyrene) in milk samples. The intra-day and inter-day precision, expressed as relative standard deviations, was < 5.9% and 6.5%, respectively, demonstrating a high precision. Owing to no requirement for electrical power, this method shows great potential for outdoor monitoring of trace-level PAHs in food matrices.

An accurate and sensitive effervescence-assisted liquid phase microextraction method for the determination of cobalt after a Schiff base complexation by slotted quartz tube-flame atomic absorption spectrophotometry in urine samples

In this study, an accurate analytical method development for cobalt determination in urine samples was described. The method is based on the mass transfer of the target analytes to the organic phase from the aqueous phase by the dispersing extractant throughout the solution with the aid of CO₂ bubbles prior to sample measurement by using a slotted quartz tube flame atomic absorption spectrophotometer. An extractor (1-decanol) dropped effervescent tablet (anhydrous sodium carbonate and sodium dihydrogen phosphate dihydrate mixture) was used in order to separate/preconcentrate cobalt after complexation of cobalt ions in aqueous solution with the Schiff base ligand. The parameters affecting the extraction output such as complexing conditions (pH, ligand concentration, and volume) and extraction conditions (extraction solvent type and volume, extraction temperature, and heating duration, NaOH volume and mixing period) were optimized to lower the detection limit. The limit of detection and quantification values under optimized experimental and instrumental conditions were determined as 3.7 μg L^-1 and 12 μg L^-1, respectively with high linearity with respect to the dynamic range between 15 and 300 μg L^-1. The enhancement factor obtained with the developed method was calculated as 83 fold. The pretreatment process was applied to urine samples in order to test the convenience of the developed method in urine samples for the determination of cobalt at low levels. The high percentage recovery results of 96-97% for four different concentrations of spiked urine samples indicated the proposed method's sufficient sensitivity for analyte determination in such a complex matrix.

Determination of Synthetic Colorants in Beverages by Deep Eutectic Solvent-Based Effervescence-Assisted Dispersive Liquid-Liquid Microextraction Coupled with High-Performance Liquid Chromatography

In this paper, a deep eutectic solvent (DES)-based effervescence-assisted dispersive liquid-liquid microextraction method was proposed for the determination of four synthetic colorants in beverages by high-performance liquid chromatography. In this method, DES synthesized from choline chloride and phenol was used as extractant. The dispersion of DES was assisted by in situ CO2 produced from the effervescence reaction between NaH2PO4 and Na2CO3 without using any organic solvent or auxiliary equipment. Furthermore, phase separation occurred naturally in the presence of the salt products of effervescence reaction, without the addition of any other salting out reagents. Some important parameters, such as species, molar ratio and volume of DES, composition and amount of effervescent agents, were optimized to achieve the best extraction efficiency. Under the optimal conditions, extraction recoveries were obtained for the analytes in the range of 83.5-114.8%. The limits of detection were in the range of 0.6-3.0 ng/mL. Relative standard deviations for intra- and interday precision were <4.68 and 6.08%, respectively. This simple, rapid, cost-effective and environmentally friendly method has been successfully applied to the analysis of synthetic colorants in 10 kinds of beverage samples.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

Dopamine-modified magnetic graphene oxide as a recoverable sorbent for the preconcentration of metal ions by an effervescence-assisted dispersive micro solid-phase extraction procedure

Nanomagnetic graphene oxide modified with dopamine (GO-Fe3O4-DA) was synthesized via a very simple procedure. Using GO-Fe3O4-DA as the new adsorbent, the effervescence-assisted dispersive micro solid-phase extraction procedure was exploited for the preconcentrative extraction of Cu(ii), Pb(ii) and Ni(ii) ions. Structural characteristics of the adsorbent were studied via FT-IR, FE-SEM, EDX and XRD analyses. The rapid dispersion and high adsorption capability of GO-Fe3O4-DA, along with the rapid separation of the adsorbent from the aqueous phase by a magnet, led to a decrease in the extraction time of the target metal ions. In effect, high extraction percentages were attained in a very short time period. In this work, the relative standard deviations (RSD; n = 3) calculated for the proposed method were 1.09, 1.25 and 1.03% for the Pb(ii), Cu(ii) and Ni(ii) ions, respectively, the calibration curve was dynamically linear in the range of 0.25 to 50 μg L-1, and the limits of detection were obtained as 0.5, 0.1, and 0.7 μg L-1. The procedure was also implemented on real sausage (herbal and meaty) samples and a water sample, vouchsafing the success of the proposed method in tackling real samples with a complicated matrix.

Dissipation Dynamics and Dietary Risk Assessment of Kresoxim-Methyl Residue in Rice

Kresoxim-methyl is a high-efficiency and broad-spectrum fungicide used for the control of rice fungal diseases; however, its residues after application potentially threaten human health. Investigations on the dissipation of kresoxim-methyl residue in rice field systems and dietary risk assessment of kresoxim-methyl in humans are limited. The present study employed the QuEChERS-GC-MS/MS method for residue analysis of kresoxim-methyl in rice plants, brown rice, and rice husks. The samples were extracted with acetonitrile and purified by PSA, C₁₈ column, and GCB. The average recovery of the spiked target compounds in the three matrices was between 80.5% and 99.3%, and the RSD was between 2.1% and 7.1%. The accuracy and precision of the method is in accordance with the requirements of residue analysis methods. Dissipation dynamic testing of kresoxim-methyl in rice plants indicated a half-life within the range of 1.8–6.0 days, and a rapid dissipation rate was detected. Dietary intake risk assessment showed that the national estimated daily intake (NEDI) of kresoxim-methyl in various Chinese subpopulations was 0.022–0.054 μg/(kg bw·days), and the risk quotient (RQ) was 0.0000055–0.00014%. These findings indicate that the risk for chronic dietary intake of kresoxim-methyl in brown rice is relatively low. The present study provides information and theoretical basis for guiding the scientific use of kresoxim-methyl in rice fields and evaluating its dietary risk in brown rice.

Magnetic effervescent tablet-assisted ionic liquid-based dispersive liquid-liquid microextraction of polybrominated diphenyl ethers in liquid matrix samples

Herein, a novel method, magnetic effervescent tablet-assisted ionic liquid-based dispersive liquid-liquid microextraction (META-IL-DLLME), was pioneered for extraction and preconcentration of polybrominated diphenyl ethers (PBDEs) in liquid matrix samples. In this proposed method, a magnetic effervescent tablet, containing CO₂ sources, ionic liquids and Fe₃S₄ magnetic nanoparticles (MNPs), combines extractant dispersion and magnetic recovery into one-step. Fe₃S₄ was synthesized, characterized and applied it for the first time to the newly developed method, and its extraction recoveries (ERs) for PBDEs were 20.8-32.0% higher than those of conventional Fe₃O₄ MNPs. The increased ERs of Fe₃S₄ resulted from its larger specific surface area and pore size. Some important parameters were rigorously optimized, such as kinds of magnetic nanoparticles, effervescent agents, extraction solvents and their volumes, elution solvents, extraction temperature and salt addition. Under the optimized conditions, the META-IL-DLLME method combined with HPLC-DAD analysis gave the linear ranges of 0.1-0.5-100 µg L^-1 with correlation coefficients of > 0.9990. The ERs ranged from 80.7% to 99.3%, and the limits of detection and quantitation were 0.012-0.078 µg L^-1 and 0.04-0.26 µg L^-1, respectively. The intra- and inter-day precisions, expressed as relative standard deviations (RSD, n = 6), were 1.32-4.83% and 1.99-4.25%, respectively. To evaluate its matrix effect, the relative recoveries of PBDEs from tap and river water, skim and whole milk, pregnant women and women serum samples at three fortification levels (2.0, 5.0 and 20.0 µg L^-1) were in the range of 77.3-106.7%. Overall, the commercial Fe₃O₄ MNPs can only be used for magnetic separation in microextraction procedures, while Fe₃S₄ MNPs gave the higher adsorption and extraction efficiency for organic analytes besides the convenient magnetic separation. Therefore, the results obtained in this study provide a superior alternative for the conventional magnetic separation and adsorbent material. Also, this newly developed method has a great potential in routine monitoring of liquid matrix samples.

Effervescence-assisted dispersive solid-phase extraction using ionic-liquid-modified magnetic β-cyclodextrin/attapulgite coupled with high-performance liquid chromatography for fungicide detection in honey and juice

In this study, a simple effervescence-assisted dispersive solid-phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic-liquid-modified magnetic β-cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one-factor-at-a-time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3-5.44%. The detection and quantitation limits were in the ranges of 0.07-0.38 and 0.23-1.27 μg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost-effective, environmentally friendly, and time-saving.

Magnetic effervescent tablet-assisted ionic liquid dispersive liquid-liquid microextraction of selenium for speciation in foods and beverages

A novel, simple and rapid method based on magnetic effervescent tablet-assisted ionic liquid dispersive liquid-liquid microextraction (MEA-IL-DLLME) followed by graphite furnace atomic absorption spectrometry (GFAAS) determination was established for the speciation of selenium in various food and beverage samples. In the procedure, a special magnetic effervescent tablet containing CO2 sources (sodium carbonate and sodium dihydrogenphosphate), ionic liquids and Fe3O4 magnetic nanoparticles (MNPs) was used to combine extractant dispersion and magnetic recovery procedures into a single step. The parameters influencing the microextraction efficiency, such as pH of the sample solution, volume of ionic liquid, amount of MNPs, concentration of the chelating agent, salt effect and matrix effect were investigated and optimised. Under the optimised conditions, the limits of detection (LODs) for Se(IV) were 0.021 μg l(-)(1) and the linear dynamic range was 0.05-5.0 μg l(-)(1). The relative standard deviation for seven replicate measurements of 1.0 μg l(-)(1) of Se(IV) was 2.9%. The accuracy of the developed method was evaluated by analysis of the standard reference materials (GBW10016 tea, GBW10017 milk powder, GBW10043 Liaoning rice, GBW10046 Henan wheat, GBW10048 celery). The proposed method was successfully applied to food and beverage samples including black tea, milk powder, mushroom, soybean, bamboo shoots, energy drink, bottled water, carbonated drink and mineral water for the speciation of Se(IV) and Se(VI) with satisfactory relative recoveries (92.0-108.1%).

Use of magnetic effervescent tablet-assisted ionic liquid dispersive liquid-liquid microextraction to extract fungicides from environmental waters with the aid of experimental design methodology

In this work, a novel effervescence-assisted microextraction technique was proposed for the detection of four fungicides. This method combines ionic liquid-based dispersive liquid-liquid microextraction with the magnetic retrieval of the extractant. A magnetic effervescent tablet composed of Fe3O4 magnetic nanoparticles, sodium carbonate, sodium dihydrogen phosphate and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonimide) was used for extractant dispersion and retrieval. The main factors affecting the extraction efficiency were screened by a Plackett-Burman design and optimized by a central composite design. Under the optimum conditions, good linearity was obtained for all analytes in pure water model and real water samples. Just for the pure water, the recoveries were between 84.6% and 112.8%, the limits of detection were between 0.02 and 0.10 μg L(-1) and the intra-day precision and inter-day precision both are lower than 4.9%. This optimized method was successfully applied in the analysis of four fungicides (azoxystrobin, triazolone, cyprodinil, trifloxystrobin) in environmental water samples and the recoveries ranged between 70.7% and 105%. The procedure promising to be a time-saving, environmentally friendly, and efficient field sampling technique.