Determination of sulfadimethoxine in milk with aptamer-functionalized Fe3 O4 /graphene oxide as magnetic solid-phase extraction adsorbent prior to HPLC

Advances in magnetic analytical extraction techniques for detecting antibiotic residues in edible samples

The widespread use of antibiotics in agricultural and animal husbandry to treat bacterial illnesses has resulted in a rise in antibiotic-resistant bacteria. These bacteria can grow when antibiotic residues are present in food items, especially in edible animal products. As a result, it is crucial to monitor and regulate the amounts of antibiotics in food. Magnetic analytical extractions (MAEs) have emerged as a potential approach for extracting antibiotic residues from food using magnetic nanoparticles (MNPs). Recent improvements in MAEs have resulted in the emergence of novel MNPs with better selectivity and sensitivity for the extraction of antibiotic residues from food samples. Consequently, this review paper addresses current developments in MAE for extracting antibiotic residues from edible samples. It also provides a critical analysis of contemporary MAE practices. The current issues and potential future developments in this field are also discussed, thereby providing a framework for future study paths.

Electrochemical biosensor for rapid and sensitive monitoring of sulfadimethoxine based on nanoporous carbon and aptamer system

In this study, a straightforward electrochemical aptasensor was developed to detect sulfadimethoxine (SDM). It included a glassy carbon electrode decorated by boron nitride quantum dots (BNQDs) and aptamer-functionalized nanoporous carbon (APT/CZ). CZ was first synthesized by calcinating a zeolitic imidazolate framework (ZIF-8). Then, the electroactive dye methylene blue (MB) was entrapped inside its pores. By attaching aptamer to the CZ surface, APT/CZ acted as a bioguard, which prevented the MB release. Therefore, the electrochemical signal of the entrapped MB was high in the absence of SDM. Introducing SDM caused the conformation of aptamers to change, and a large number of MB was released, which was removed by washing. Therefore, the detection strategy was done based on the change in the electrochemical signal intensity of MB. The aptasensor was applied to detect SDM at a concentration range of 10-17 to 10-7 M with a detection limit of 3.6 × 10-18 M.

A novel and sensitive electrochemical aptasensor for sulfadimethoxine detection based on the triple helix/exonuclease I-assisted double-amplification strategy

In this paper, a novel and sensitive electrochemical aptasensor for sulfadimethoxine (SDM) detection has been designed based on the triple helix structure/exonuclease I (Exo I)-assisted double signal amplification strategy. The aptamer probe (Apt) hybridizes with the signal transduction probe (STP) on the electrode to form a rigid double-stranded DNA (dsDNA) structure, so that the STP remains upright and methylene blue (MB) on the STP is far away from the electrode surface, resulting in a delicate current signal. In the presence of SDM, the SDM and Apt combine into a complex, leading to the transfer of the Apt and the exposure of the STP. Meanwhile, the added Exo I can digest the Apt to realize the cyclic amplification of SDM. After the addition of the signal probe (SP), a triple helix structure between the SP and STP is formed under acidic conditions, and MB on the STP and SP collide with the electrode surface to generate a strong electrochemical signal. The proposed aptasensor combines the features of the triple helix structure and Exo I to achieve double signal amplification for the sensitive detection of SDM with a wide linear range of 0.05-1000 ng mL-1 and a low detection limit of 0.02 ng mL-1. Furthermore, it has been successfully used to detect SDM in milk and lake water samples.

A review of aptamer-conjugated nanomaterials for analytical sample preparation: Classification according to the utilized nanomaterials

BACKGROUND

Sample extraction before detection is a critical step in analysis. Since targets of interest are often found in complex matrices, the sample can not be directly introduced to the analytical instrument. Nanomaterials with unique physical-chemical properties are excellent supports for use in sorbent-based extraction. However, they lack selectivity and thus need to be functionalized with target-capturing molecules. Antibodies and molecularly imprinted polymers (MIPs) can be used for this purpose, but they have some problems that limit their practical applications. Hence, functionalization of nanomaterials for selectivity remains a problem.

RESULTS

Nucleic acid aptamers are affinity reagents that can provide superiority to antibodies since they can be selected in vitro and at a lower cost. Moreover, aptamers can be chemically synthesized and easily modified with different functional groups. Hence, aptamers are good candidates to impart selectivity to the nanomaterials. Recent studies focus on the integration of aptamers with magnetic nanoparticles, carbon-based nanomaterials, metal-organic frameworks, gold nanoparticles, gold nanorods, silica nanomaterials, and nanofibers. The unique properties of nanomaterials and aptamers make the aptamer-conjugated nanomaterials attractive for use in sample preparation. Aptamer-functionalized nanomaterials have been successfully used for selective extraction of proteins, small molecules, and cells from different types of complex samples such as serum, urine, and milk. In particular, magnetic nanoparticles have a wider use due to the rapid extraction of the sample under magnetic field.

SIGNIFICANCE

In this review, we aim to emphasize how beneficial features of nanomaterials and aptamers could be combined for extraction or enrichment of the analytes from complex samples. We aim to highlight that the benefits are twofold in terms of selectivity and efficiency when employing nanomaterials and aptamers together as a single platform.

Synthesis of amine-functionalized magnetic porous organic polymers for effective extraction of phenolic endocrine disrupting chemicals

Amine-functionalized porous organic polymers (EDA-POP-PC and EDA-POP-BT) were prepared by post-modification of POP-PC and POP-BT with ethylenediamine (EDA) for the first time. The POP-PC and POP-BT were obtained through Friedel-Crafts acylation reaction of potassium tetraphenylborate with p-phthaloyl chloride (PC) and 1,3,5-benzenetricarbonyl trichloride (BT), respectively. The EDA-POPs exhibited superior adsorption capacity for phenolic endocrine disrupting chemicals (EDCs). After magnetically functionalization, the obtained M-EDA-POP-PC was employed as a magnetic adsorbent for enrichment of phenolic EDCs from real samples prior to high performance liquid chromatography-ultraviolet detection. The current strategy showed low detection limits (S/N = 3) of 0.02-0.07, 0.04-0.08 and 0.04-0.10 ng mL-1 for river water, white peach juice and lychee juice, respectively. The method recoveries were 81.7%-115% with relative standard deviations below 8.6%. The proposed strategy showed good practicality for sensitive determination of phenolic EDCs in real samples.

Organic solvent-free solid-phase extraction of acetamiprid in food samples using Strep-Tag system integrated apta-magnetic sorbents

A novel magnetic sorbent, named ABA-(Strep-tag II)-STMB, was prepared by modifying the acetamiprid-binding aptamer (ABA) onto Strep-Tactin-coated magnetic beads (STMBs) via Strep-tag II. The integration of the Strep-tag system allows the elution of the target by the addition of D-biotin, which can compete with Strep-tag II for the Strep-Tactin sites on the magnetic beads, instead of organic solvents. The sorbent showed good selectivity and reusability, and the extraction efficiency could still reach 90.5 % after 8 reuses. Under the optimized conditions, the developed magnetic solid-phase extraction (MSPE) method exhibited good linearity in the range of 0.1-100 μM, with the limits of detection (LOD) of 0.017-0.019 μM, and the limits of quantification (LOQ) of 0.057-0.066 μM. The relative standard deviations (RSDs) were below 5.51 %. The spiked recoveries were 84.4 %-96.0 %. The analysis results were in good agreement with those of the QuEChERS method.

Multi-class, multi-residue determination of 132 veterinary drugs in milk by magnetic solid-phase extraction based on magnetic hypercrosslinked polystyrene prior to their determination by high-performance liquid chromatography-tandem mass spectrometry

A quantitative multi-class multi-residue analytical method was developed for the determination of veterinary drugs in milk by high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). A total of 132 veterinary drugs investigated belonged to almost 15 classes including sulfonamides, β-lactams, tetracyclines, quinolones, macrolides, nitrofurans, nitroimidazoles, phenicols, lincosamides, pleuromutilins, macrocyclic lactones, quinoxaline antibiotics, benzimidazoles, anthelmintics, coccidiostats and some others. A magnetic solid-phase extraction procedure was developed using magnetic hypercrosslinked polystyrene (HCP/Fe₃O₄) for the sample preparation prior to HPLC-MS/MS without deproteinization step. The results indicated recoveries of 85-107% for 14 sulfonamides, 85-120% for 13 β-lactams, 89-115% for 4 tetracyclines, 82-119% for 14 quinolones, 82-115% for 8 macrolides, 97-109% for 4 nitrofurans, 84-115% for 10 nitroimidazoles, 89-114% for 3 phenicols, 86-111% for 3 lincosamides, 97-102% for 2 pleuromutilins, 72-88% for 4 macrocyclic lactones, 87-104% for 4 quinoxaline antibiotics, 76-119% for 21 benzimidazoles, 79-115% for 12 anthelmintics, 81-118% for 12 coccidiostats and 75-119 % for 5 unclassified drugs, with relative standard deviations (RSDs) of less than 20%, and the LOQs ranged from 0.05 to 1 μg kg^-1. This methodology was then applied to field-collected real milk samples and trace levels of some veterinary drugs were detected.

Microfluidic flow-injection aptamer-based chemiluminescence platform for sulfadimethoxine detection

Gold nanoparticle–catalyzed chemiluminescence (CL) of luminol is an attractive alternative to strategies relying on enzymes, as their aggregation leads to significantly enhanced CL signals. Consequently, analytes disturbing such aggregation will lead to an easy-to-quantify weakening of the signal. Based on this concept, a homogeneous aptamer-based assay for the detection of sulfadimethoxine (SDM) has been developed as a microfluidic CL flow-injection platform. Here, the efficient mixing of gold nanoparticles, aptamers, and analyte in short channel distances is of utmost importance, and two-dimensional (2D) and three-dimensional (3D) mixer designs made via Xurography were investigated. In the end, since 2D designs could not provide sufficient mixing, a laminated 3D 5-layer microfluidic mixer was developed and optimized with respect to mixing capability and observation by the charge-coupled device (CCD) camera. Furthermore, the performance of standard luminol and its more hydrophilic derivative m-carboxy luminol was studied identifying the hydrophilic derivative to provide tenfold more signal enhancement and reliable results. Finally, the novel detection platform was used for the specific detection of SDM via its aptamer and yielded a stunning dynamic range over 5 orders of magnitude (0.01–1000 ng/ml) and a limit of detection of 4 pg/ml. This new detection concept not only outperforms other methods for SDM detection, but can be suggested as a new flow-injection strategy for aptamer-based rapid and cost-efficient analysis in environmental monitoring and food safety.

Removal of ammonium, phosphate, and sulfonamide antibiotics using alum sludge and low-grade charcoal pellets

Powder adsorbents perform well due to their large surface area but are difficult to use because of aggregation and channeling. In this study, pelletization of adsorbents was proposed as a solution to these operating problems. A three-component mixture was extruded into pellets and calcined under air or nitrogen conditions The pellet adsorbent removed 47, 71, 97, and 72% of ammonium, phosphate, sulfathiazole, and sulfamethoxazole, respectively. Bentonite improved greatly the strength of pellets, and a 10 wt% of bentonite was sufficient to maintain pellet shape and mass. No significant difference in individual adsorption and multi-pollutant adsorption was found. Pellet adsorbents with alum sludge, bentonite, and low-grade charcoal are low-cost materials that effectively remove multi-pollutants from the aqueous phase.

Aptamer-based assays: strategies in the use of aptamers conjugated to magnetic micro- and nanobeads as recognition elements in food control

An outlook on the current status of different strategies for magnetic micro- and nanosized bead functionalization with aptamers as prominent bioreceptors is given with a focus on electrochemical and optical apta-assays, as well as on aptamer-modified magnetic bead–based miniaturized extraction techniques in food control. Critical aspects that affect interaction of aptamers with target molecules, as well as the possible side effects caused by aptamer interaction with other molecules due to non-specific binding, are discussed. Challenges concerning the real potential and limitations of aptamers as bioreceptors when facing analytical problems in food control are addressed.

Salt-resistant nanosensor for fast sulfadimethoxine tracing based on oxygen-doped g-C3N4 nanoplates

A novel oxygen-doped g-C₃N₄ nanoplate (OCNP) structure that can serve as an efficient sulfadimethoxine (SDM) sensing platform has been developed. Taking advantage of its inherent oxygen-containing functional groups and 2D layered structure with π-conjugated system, OCNP exhibits effective radiative recombination of surface-confined electron-hole pairs and efficient π-π interaction with SDM. This causes rapid fluorescence response and thus ensures the fast and continuous monitoring of SDM. Based on the fluorescence experiments and band structure calculation, the mechanism of the SDM-induced quenching phenomenon was mainly elucidated as the photoinduced electron transfer process under a dynamic quenching mode. Under optimized conditions, the as-proposed nanosensor, which emitted strong fluorescence at 375 nm with an excitation wavelength at 255 nm, presents an excellent analytical performance toward SDM with a wide linear range from 3 to 60 μmol L^-1 and a detection limit of 0.85 μmol L^-1 (S/N = 3). In addition, this strategy exhibits satisfactory recovery varied from 94 to 103% with relative standard derivations (RSD) in the range 0.9 to 6.8% in real water samples. It also shows marked tolerability to a series of high concentrations of metals and inorganic salts. This strategy not only broadens the application of oxygen-doped g-C₃N₄ nanomaterial in antibiotic sensing field but also presents a promising potential for on-line contaminant tracing in complex environments.

Application of magnetic nanomaterials in bioanalysis

The importance of magnetic nanomaterials and magnetic hybrid materials, which are classified as new generation materials, in analytical applications is increasingly understood, and research on the adaptation of these materials to analytical methods has gained momentum. Development of sample preparation techniques and sensor systems using magnetic nanomaterials for the analysis of inorganic, organic and biomolecules in biological samples, which are among the samples that analytical chemists work on most, are among the priority issues. Therefore in this review, we focused on the use of magnetic nanomaterials for the bioanalytical applications including inorganic and organic species and biomolecules in different biological samples such as primarily blood, serum, plasma, tissue extracts, urine and milk. We summarized recent progresses, prevailing techniques, applied formats, and future trends in sample preparation-analysis methods and sensors based on magnetic nanomaterials (Mag-NMs). First, we provided a brief introduction of magnetic nanomaterials, especially their magnetic properties that can be utilized for bioanalytical applications. Second, we discussed the synthesis of these Mag-NMs. Third, we reviewed recent advances in bioanalytical applications of the Mag-NMs in different formats. Finally, recently literature studies on the relevance of Mag-NMs for bioanalysis applications were presented.