Structure of water incorporated in sulfobetaine polymer films as studied by ATR-FTIR

Copper oxide(I) nanoparticle-modified cellulose acetate membranes with enhanced antibacterial and antifouling properties

Cellulose acetate membranes exhibit a potential to be applied in hemodialysis. However, their performance is limited by membrane fouling and a lack of antibacterial properties. In this research, copper oxide (I) nanoparticles were fabricated in situ into a cellulose acetate matrix in the presence of polyvinylpyrrolidone (pore-forming agent) and sulfobetaine (stabilising agent) to reduce the leakage of copper ions from nano-enhanced membranes. The influence of nanoparticles on the membrane structure and their antibacterial and antifouling properties were investigated. The results showed that incorporating Cu2O NPs imparted significant antibacterial properties against Staphylococcus aureus and fouling resistance under physiological conditions. The Cu2O NPs-modified membrane could pave the way for potential dialysis applications.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Sulfobetaine-Siloxanes: A Class of Self-Destructive Surfactants

The hydrolytic susceptibility of sulfobetaine-siloxane surfactants is investigated by comparison of a homologous series in this subclass of surfactants (R-(CH2)3N+(Me)2(CH2)3SO3-; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-) with an analogue series of oxyethylene-siloxane surfactants (R-(CH2)3(OCH2CH2)10.2OH; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-). Nuclear magnetic resonance (NMR) monitoring of these surfactants in an aqueous solution shows that the presence of the sulfobetaine head structure greatly enhances the hydrolysis rate of the siloxane tail as compared with oxyethylene-siloxane analogue control experiments. This sulfobetaine effect is confirmed by adding a model compound, (Me)3N+(CH2)3SO3-, to the oxyethylene-siloxane surfactants and observing the large hydrolysis enhancement. Measurements of pH indicate the sulfobetaine presence greatly enhances acidity, but rigorous analysis could discover no source of acid other than the presence of the sulfobetaine structure. Titration measurements confirmed the presence of a tightly bound hydration layer of 4-7 water molecules per sulfobetaine group. It is speculated that the source of acidity may originate from an aqueous exclusion zone nucleated by the hydrated sulfobetaine at the interface of a sulfobetaine-siloxane surfactant bilayer aggregate. Hydrolysis prevention is investigated by addition of a pH 7 phosphate buffer, of an alkyl polyglycoside cosurfactant, and of a combination of both, with a finding of very significant but not complete suppression of the hydrolysis.

Covalent bonding of quaternary ammonium compounds and zwitterionic polymer functional layers on polydimethylsiloxane against Escherichia Coli adhesion

Quaternary ammonium compounds (QACs) are recognized by the World Health Organization as a useful disinfectant against microbes. The synergistic effect of zwitterionic polymers with QACs as antimicrobial agents rather than QACs alone is yet to be investigated. A potential strategy is the use of covalent bonding to halt the release of minute antibacterials and a hierarchy of functional layers to detain and annihilate microbes. The strategy was tested on a polydimethylsiloxane (PDMS) surface on which quaternized poly(2-dimethylaminoethyl methacrylate) (qDMA+) and sulfobetaine (SBMA) were hierarchically functionalized. Attenuated total reflectance Fourier transform infrared analysis confirmed the quaternization of DMA to qDMA+, grafting of qDMA + on PDMS (PDMS-qDMA+), and grafting of the SBMA overlayer on PDMS-qDMA+ (PDMS-qDMA+-SB). Contact angle measurement showed that PDMS-qDMA + exhibited the lowest contact angle (26.2 ± 2.9°) compared with the hydrophobic PDMS (115.2 ± 1.6°), but that of PDMSqDMA+-SB increased to 56.3 ± 1.3°. The Escherichia coli survival count revealed that PDMS-qDMA+ and PDMS-qDMA+-SB exhibited significantly greater bactericidal ability than PDMS. Confocal laser scanning microscopy revealed fewer dead bacteria on PDMS-qDMA+-SB than on PDMS-qDMA+. Scanning electron microscopy demonstrated that E. coli was disintegrated on the functionalized surface via dual-end cell lysis. To the best of our knowledge, this is the first observation of this type of process. The results confirmed the potent antibacterial and cell disruption activities of the qDMA+ and SBMA modified PDMS surface.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Prevention strategies of postoperative adhesion in soft tissues by applying biomaterials: Based on the mechanisms of occurrence and development of adhesions

Postoperative adhesion (POA) widely occurs in soft tissues and usually leads to chronic pain, dysfunction of adjacent organs and some acute complications, seriously reducing patients' quality of life and even being life-threatening. Except for adhesiolysis, there are few effective methods to release existing adhesion. However, it requires a second operation and inpatient care and usually triggers recurrent adhesion in a great incidence. Hence, preventing POA formation has been regarded as the most effective clinical strategy. Biomaterials have attracted great attention in preventing POA because they can act as both barriers and drug carriers. Nevertheless, even though much reported research has been demonstrated their efficacy on POA inhibition to a certain extent, thoroughly preventing POA formation is still challenging. Meanwhile, most biomaterials for POA prevention were designed based on limited experiences, not a solid theoretical basis, showing blindness. Hence, we aimed to provide guidance for designing anti-adhesion materials applied in different soft tissues based on the mechanisms of POA occurrence and development. We first classified the postoperative adhesions into four categories according to the different components of diverse adhesion tissues, and named them as "membranous adhesion", "vascular adhesion", "adhesive adhesion" and "scarred adhesion", respectively. Then, the process of the occurrence and development of POA were analyzed, and the main influencing factors in different stages were clarified. Further, we proposed seven strategies for POA prevention by using biomaterials according to these influencing factors. Meanwhile, the relevant practices were summarized according to the corresponding strategies and the future perspectives were analyzed.

Design of self-assembled glycopolymeric zwitterionic micelles as removable protein stabilizing agents

Developing stabilizers that protect proteins from denaturation under stress, and are easy to remove from solutions, is a challenge in protein therapeutics. In this study, micelles made of trehalose, a zwitterionic polymer (poly-sulfobetaine; poly-SPB), and polycaprolactone (PCL) were synthesized by a one-pot reversible addition-fragmentation chain-transfer (RAFT) polymerization reaction. The micelles protect lactate dehydrogenase (LDH) and human insulin from denaturation due to stresses like thermal incubation and freezing, and help them retain higher-order structures. Importantly, the protected proteins are readily isolated from the micelles by ultracentrifugation, with over 90% recovery, and almost all enzymatic activity is retained. This suggests the great potential of poly-SPB-based micelles for use in applications requiring protection and removal as required. The micelles may also be used to effectively stabilize protein-based vaccines and drugs.

Investigation of Hydration States of Ionic Liquids by Fourier Transform Infrared Absorption Spectroscopy: Relevance to Stabilization of Protein Molecules

Among many kinds of ionic liquids, some hydrated ionic liquids (Hy ILs) have shown an exceptional capability to stabilize protein molecules and maintain their structure and functions over a long period. However, the complex IL-water interaction among these protein-stabilizing Hy ILs has yet to be elucidated clearly. In this work, we investigate the origin of the compatibility of ionic liquid with proteins from the viewpoint of hydration structure. We systematically analyzed the hydrogen-bonding state of water molecules around ionic liquid using Fourier transform infrared absorption (FT-IR) spectroscopy. We found that the native hydrogen-bonding network of water remained relatively unperturbed in the protein-stabilizing ILs. We also observed that the protein-stabilizing ILs have a strong electric field interaction with the surrounding water molecules and this water-IL interaction did not disrupt the water-water hydrogen-bonding interaction. On the other hand, protein-denaturing ILs perturb the hydrogen-bonding network of the water molecules to a greater extent. Furthermore, the protein-denaturing ILs were found to have a weak electric field effect on the water molecules. We speculate that the direct hydrogen bonding of the ILs with water molecules and the strong electric field of the ions lasting several hydration shells while maintaining the relatively unperturbed hydrogen-bonding network of the water molecules play an essential role in protein stabilization.

Supramolecular Protein Stabilization with Zwitterionic Polypeptide-Cucurbit[7]uril Conjugates

Protein aggregation is an obstacle for the development of new biopharmaceuticals, presenting challenges in shipping and storage of vital therapies. Though a variety of materials and methods have been explored, the need remains for a simple material that is biodegradable, nontoxic, and highly efficient at stabilizing protein therapeutics. In this work, we investigated zwitterionic polypeptides prepared using a rapid and scalable polymerization technique and conjugated to a supramolecular macrocycle host, cucurbit[7]uril, for the ability to inhibit aggregation of model protein therapeutics insulin and calcitonin. The polypeptides are based on the natural amino acid methionine, and zwitterion sulfonium modifications were compared to analogous cationic and neutral structures. Each polymer was end-modified with a single cucurbit[7]uril macrocycle to afford supramolecular recognition and binding to terminal aromatic amino acids on proteins. Only conjugates prepared from zwitterionic structures of sufficient chain lengths were efficient inhibitors of insulin aggregation and could also inhibit aggregation of calcitonin. This polypeptide exhibited no cytotoxicity in human cells even at concentrations that were five-fold of the intended therapeutic regime. We explored treatment of the zwitterionic polypeptides with a panel of natural proteases and found steady biodegradation as expected, supporting eventual clearance when used as a protein formulation additive.

Zwitterionic Biomaterials

The term "zwitterionic polymers" refers to polymers that bear a pair of oppositely charged groups in their repeating units. When these oppositely charged groups are equally distributed at the molecular level, the molecules exhibit an overall neutral charge with a strong hydration effect via ionic solvation. The strong hydration effect constitutes the foundation of a series of exceptional properties of zwitterionic materials, including resistance to protein adsorption, lubrication at interfaces, promotion of protein stabilities, antifreezing in solutions, etc. As a result, zwitterionic materials have drawn great attention in biomedical and engineering applications in recent years. In this review, we give a comprehensive and panoramic overview of zwitterionic materials, covering the fundamentals of hydration and nonfouling behaviors, different types of zwitterionic surfaces and polymers, and their biomedical applications.

Enhanced Interfacial Affinity of the Supercapacitor Electrode with a Hydrogel Electrolyte by a Preadsorbed Polyzwitterion Layer

Polymer hydrogel-based solid-state supercapacitors exhibit great potential applications in flexible devices. Nevertheless, the poor electrode-electrolyte interfacial properties restrict their advances. Herein, by taking the well-developed polyvinyl alcohol (PVA)/H₂SO₄ gel electrolyte and the graphene film electrode as the prototype, a very simple strategy is demonstrated to improve the interfacial affinity between the electrode and the hydrogel electrolyte by a preadsorbed highly hydrophilic polyzwitterion layer of poly(propylsulfonate dimethylammonium propylmethacrylamide) (PPDP) on the electrode surface. Electrochemical measurements confirm that the charge-transfer resistance on the interface is effectively reduced after modification with PPDP. Consequently, the obtained areal capacitance experiences a 3-fold increase compared to the unmodified ones. Results from electrochemical quartz crystal microbalance with dissipation demonstrate that more ions can be reversibly transferred on the modified interface during the change-discharge cycles, suggesting that the accessible surface area on the electrode is also increased. The hydrophilic PVA layer shows a similar function but with a much smaller efficiency. The strategy depicted here is highly universalizable and can be generalized to different electrode/electrolyte systems or other electrochemical energy storage devices.

Zwitterionic Conducting Polymers: From Molecular Design, Surface Modification, and Interfacial Phenomenon to Biomedical Applications

Conducting polymers (CPs) have gained attention as electrode materials in bioengineering mainly because of their mechanical softness compared to conventional inorganic materials. To achieve better performance and broaden bioelectronics applications, the surface modification of soft zwitterionic polymers with antifouling properties represents a facile approach to preventing unwanted nonspecific protein adsorption and improving biocompatibility. This feature article emphasizes the antifouling properties of zwitterionic CPs, accompanied by their molecular synthesis and surface modification methods and an analysis of the interfacial phenomenon. Herein, commonly used methods for zwitterionic functionalization on CPs are introduced, including the synthesis of zwitterionic moieties on CP molecules and postsurface modification, such as the grafting of zwitterionic polymer brushes. To analyze the chain conformation, the structure of bound water in the vicinity of zwitterionic CPs and biomolecule behavior, such as protein adsorption or cell adhesion, provide critical insights into the antifouling properties. Integrating these characterization techniques offers general guidelines and paves the way for designing new zwitterionic CPs for advanced biomedical applications. Recent advances in newly designed zwitterionic CP-based electrodes have demonstrated outstanding potential in modern biomedical applications.

Low Fouling Polysulfobetaines with Variable Hydrophobic Content

Amphiphilic polymer coatings combining hydrophilic elements, in particular zwitterionic groups, and hydrophobic elements comprise a promising strategy to decrease biofouling. However, the influence of the content of the hydrophobic component in zwitterionic coatings on the interfacial molecular reorganization dynamics and the anti-fouling performance is not well understood. Therefore, coatings of amphiphilic copolymers of sulfobetaine methacrylate 3-[N-2'-(methacryloyloxy)ethyl-N,N-dimethyl]-ammonio propane-1-sulfonate (SPE) are prepared which contain increasing amounts of hydrophobic n-butyl methacrylate (BMA). Their fouling resistance is compared to that of their homopolymers PSPE and PBMA. The photo-crosslinked coatings form hydrogel films with a hydrophilic surface. Fouling by the proteins fibrinogen and lysozyme as well as by the diatom Navicula perminuta and the green algae Ulva linza is assessed in laboratory assays. While biofouling is strongly reduced by all zwitterionic coatings, the best fouling resistance is obtained for the amphiphilic copolymers. Also in preliminary field tests, the anti-fouling performance of the amphiphilic copolymer films is superior to that of both homopolymers. When the coatings are exposed to a marine environment, the reduced susceptibility to silt incorporation, in particular compared to the most hydrophilic polyzwitterion PSPE, likely contributes to the improved fouling resistance.

Stimuli-Responsive Zwitterionic Core-Shell Microgels for Antifouling Surface Coatings

Fouling on filtration membranes is induced by the nonspecific interactions between the membrane surface and the foulants, and effectively hinders their efficient use in various applications. Here, we established a facile method for the coating of membrane surface with a dual stimuli-responsive antifouling microgel system enriched with a high polyzwitterion content. Different poly(sulfobetaine) (PSB) zwitterionic polymers with defined molecular weights and narrow dispersities were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and integrated onto poly(N-vinylcaprolactam) (PVCL) microgels via a controlled dosage of a cross-linker, adapting a precipitation polymerization technique to obtain a core-shell microstructure. Increasing the PSB macro-RAFT concentration resulted in a shift of both upper critical solution temperature and lower critical solution temperature toward higher temperatures. Cryogenic transmission electron microscopy at different temperatures suggested the formation of a core-shell morphology with a PVCL-rich core and a PSB-rich shell. On the other hand, the significant variations of different characteristic proton signals and reversible phase transitions of the microgel constituents were confirmed by temperature-dependent ¹H NMR studies. Utilizing a quartz crystal microbalance with dissipation monitoring, we have been able to observe and quantitatively describe the antipolyelectrolyte behavior of the zwitterionic microgels. The oscillation frequency of the sensor proved to change reversibly according to the variations of the NaCl concentration, showing, in fact, the effect of the interaction between the salt and the opposite charges present in the microgel deposited on the sensor. Poly(ethersulfone) membranes, chosen as the model surface, when functionalized with zwitterionic microgel coatings, displayed protein-repelling property, stimulated by different transition temperatures, and showed even better performances at increasing NaCl concentration. These kinds of stimuli-responsive zwitterionic microgel can act as temperature-triggered drug delivery systems and as potential coating materials to prevent bioadhesion and biofouling as well.

Role of interfacial water in determining the interactions of proteins and cells with hydrated materials

Water molecules play a crucial role in biointerfacial interactions, including protein adsorption and desorption. To understand the role of water in the interaction of proteins and cells at biological interfaces, it is important to compare particular states of hydration water with various physicochemical properties of hydrated biomaterials. In this review, we discuss the fundamental concepts for determining the interactions of proteins and cells with hydrated materials along with selected examples corresponding to our recent studies, including poly(2-methoxyethyl acrylate) (PMEA), PMEA derivatives, and other biomaterials. The states of water were analyzed by differential scanning calorimetry, in situ attenuated total reflection infrared spectroscopy, and surface force measurements. We found that intermediate water which is loosely bound to a biomaterial, is a useful indicator of the bioinertness of material surfaces. This finding on intermediate water provides novel insights and helps develop novel experimental models for understanding protein adsorption in a wide range of materials, such as those used in biomedical applications.

Polyampholyte-Based Synthetic Chaperone Modulate Amyloid Aggregation and Lithium Delivery

Protein misfolding and aggregation is the pathological hallmark of Alzheimer's disease (AD). The etiopathogenesis of AD involves the accumulation of amyloid-β (Aβ) plaques in the brain, which disrupt the neuronal network and communication, causing neuronal death and severe cognitive impairment. Modulation of Aβ aggregation by exogenous therapeutic agents is considered an effective strategy to treat AD. Frequent failure of drug candidates in various phases of clinical trials reiterates the need for alternative therapeutic strategies for AD treatment. Polyampholytes with cationic and anionic segments are considered as artificial protein mimics capable of modulating the protein misfolding and aggregation. We report a diblock copolymer of tryptophan-functionalized methacrylic acid (PTMA) polyampholyte synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerization. Investigation revealed that PTMA acts as a synthetic chaperone to protect the native structure of the lysozyme under heat-induced aggregation conditions. PTMA effectively modulates Aβ aggregation and rescues neuronal cells. Lithium has been shown to exhibit therapeutic efficacy in chronic neurological diseases including AD. PTMA sequesters and releases lithium ions in response to neuropathological pH stimuli, making it a promising candidate for lithium transport and delivery. The detailed studies demonstrate PTMA as aggregation modulator and lithium carrier with implications for combinational therapy to treat AD.

Novel anti-biofouling and drug releasing materials for contact lenses

Contact lens users very often become patients of allergic conjunctivitis, which is caused by protein and bacteria adsorption to the eye, because contact lenses easily adsorb proteins and bacteria. However, even if contact lens users develop eye diseases such as allergic conjunctivitis, most of them continue to use contact lenses to avoid interference to daily life or a decrease in their quality of life. If novel contact lenses able to prevent and additionally cure eye diseases can be manufactured, they could improve the quality of life of contact lens users worldwide. Thus, we aim to develop a novel material for contact lenses to prevent diseases by incorporating a zwitterionic polymer with the ability to suppress protein and bacteria adsorption. In addition, we also aim to effectively introduce and release a drug against allergic conjunctivitis from the contact lens material. Because the poorly water-soluble drug for allergic conjunctivitis (pranoprofen) forms a rigid crystal structure, we developed the novel "hot-melt press method" to construct a contact lens able to effectively release it. In the present study, polymer sheets containing carboxymethyl betaine (a kind of zwitterionic monomer), 2-hydroxyethyl methacrylate, and 1-vinyl-2-pyrrolidone were prepared using three different procedures. The sheets were hydrophilic and showed a strong resistance against protein and bacteria adsorption. The sheets prepared by the hot-melt press method were transparent and seemed to have potential as a material for contact lenses. In addition, the drug introduced into the sheets during preparation was observed to release at a practically appropriate dose. Therefore, it is expected that the sheets could possibly be used as a material for contact lenses which not only protect against the development of eye trouble due to protein and bacterial adsorption, but also heal allergic conjunctivitis.

Comparative Study of Protein Aggregation Arrest by Zwitterionic Polysulfobetaines: Using Contrasting Raft Agents

Protein aggregation has caused limitations in the study and development of protein-based biopharmaceuticals. We prepared different polysulfobetaine (poly-SPB) polymers via reversible addition fragmentation chain transfer (RAFT) polymerization. These polymers exhibited high efficiency in modulation of protein aggregation. We synthesized polysulfobetaines using two different RAFT agents, and analyzed the aggregation profile of lysozyme and insulin. In poly-SPBs, existence of a hydrophobic RAFT agent resulted in visible enhancement of the residual enzymatic activity of lysozyme, whereas it remained unaffected by the hydrophilic RAFT agent. In addition, these polymers resulted in significant suppression in the aggregation of insulin. Increase in the molecular weight of the polymer caused higher efficiency to perpetuate enzymatic activity of lysozyme upon thermal denaturation. The polymers arrested the formation of amyloid like fibrils of lysozyme and insulin, thus indicating their potential to inhibit aggregation. The results unambiguously demonstrate the importance of polysulfobetaine moiety and hydrophobicity in protein aggregation inhibition. This study gives insight into the protein aggregation inhibition by zwitterionic polymers, which have a potential to be developed as aggregation inhibitors in the future.

Engineering Antifouling Conducting Polymers for Modern Biomedical Applications

Conducting polymers are considered to be favorable electrode materials for implanted biosensors and bioelectronics, because their mechanical properties are similar to those of biological tissues such as nerve and brain tissues. However, one of the primary challenges for implanted devices is to prevent the unwanted protein adhesion or cell binding within biological fluids. The nonspecific adsorption generally causes the malfunction of implanted devices, which is problematic for long-term applications. When responding to the requirements of solving the problems caused by nonspecific adsorption, an increasing number of studies on antifouling conducting polymers has been recently published. In this review, synthetic strategies for preparing antifouling conducting polymers, including direct synthesis of functional monomers and post-functionalization, are introduced. The applications of antifouling conducting polymers in modern biomedical applications are particularly highlighted. This paper presents focuses on the features of antifouling conducting polymers and the challenges of modern biomedical applications.

Evaluating the Effect of Shear Stress on Graft-To Zwitterionic Polycarboxybetaine Coating Stability Using a Flow Cell

The effect of surface coatings on the performance of antifouling activity under flow can be influenced by the flow/coating interactions. This study evaluates the effect of surface coatings on antifouling activity under different flows for the analyses of coating stability. This was done by exposing DOPA-PCB-300/dopamine coated polydimethylsiloxane (PDMS) to physiological shear stresses using a recirculation system which consisted of dual chamber acrylic flow cells, tygon tubing, flow probe and meter, and perfusion pumps. The effect of shear stress induced by phosphate buffered saline flow on coating stability was characterized with differences in fibrinogen adsorption between control (coated PDMS not loaded with shear stress) and coated samples loaded with various shear stresses. Fibrinogen adsorption data showed that relative adsorption on coated PDMS that were not exposed to shear (5.73% ± 1.97%) was significantly lower than uncoated PDMS (100%, p < 0.001). Furthermore, this fouling level, although lower, was not significantly different from coated PDMS membranes that were exposed to 1 dyn/cm² (9.55% ± 0.09%, p = 0.23), 6 dyn/cm² (15.92% ± 10.88%, p = 0.14), and 10 dyn/cm² (21.62% ± 13.68%, p = 0.08). Our results show that DOPA-PCB-300/dopamine coatings are stable, with minimal erosion, under shear stresses tested. The techniques from this fundamental study may be used to determine the limits of stability of coatings in long-term experiments.

Oxidation-Mediated, Zwitterionic Polydopamine Coatings for Marine Antifouling Applications

We synthesized a zwitterionic dopamine derivative ( ZW-DOPA) containing both catechol and amine groups, and we demonstrated an excellent marine antifouling surface by controlling the oxidation of ZW-DOPA. The oxidation was mediated by the deprotonation of catechol or the addition of an oxidant (ammonium persulfate (AP) or sodium periodate (NaIO₄)). The oxidation and subsequent molecular transformation of ZW-DOPA was investigated over time by UV-vis spectroscopy. Among the different oxidation conditions tested, NaIO₄-induced ZW-DOPA coating was the most efficient and successfully formed on various substrates, such as titanium dioxide, stainless steel, and nylon. Compared with uncoated substrates, ZW-DOPA-coated substrates showed high resistance to marine diatom adhesion. Considering the ease of use and substrate independence of the ZW-DOPA coating, this method shows promise as a basis for inhibiting marine fouling on a variety of substrates used in the marine industry and aquatic environments.

Synergistic Effects of Ions and Surface Potentials on Antifouling Poly(3,4-ethylenedioxythiophene): Comparison of Oligo(Ethylene Glycol) and Phosphorylcholine

For electrified surfaces, ions and applied potentials play major roles in controlling the surface properties. Antifouling materials such as poly(ethylene glycol) and zwitterionic polymers that resist nonspecific protein binding and cell adhesion play a key role in various biomedical applications. In this study, we investigated and compared the antifouling properties of conducting polymers grafted with oligo(ethylene glycol) groups and phosphorylcholine (PC) groups in the presence of different anions and applied potentials. Considerable effort has been made to illustrate the different effects of manipulating the antifouling properties of these two surfaces. We prepared polymer films by applying electropolymerization to two functionalized (3,4-ethylenedioxythiophene) polymers containing triethylene glycol and PC groups, respectively. A quartz crystal microbalance with dissipation (QCM-D) was employed to characterize the negatively charged bovine serum albumin and positively charged lysozyme adsorption as a function of ionic concentration in the presence of various Hofmeister anions. The frequency changes corresponded to the protein or ion adsorption/desorption behavior on the surface. The anions adsorbed on polymer films to effectively enhance the hydration layer of the polymer surface and reduce nonspecific protein binding. We further integrated a potentiostat with the QCM-D to control the protein adsorption/desorption behaviors by applying potentials, and we conducted an electrochemical QCM-D study. Most importantly, with the synergistic effect of ions and surface potential, a nearly fresh polymer surface was regenerated. This study describes principles to maintain and regenerate the antifouling properties of electrified surfaces, which are critical for implanted bioelectronics applications.

Water-Deactivated Polyelectrolyte Hydrogel Electrolytes for Flexible High-Voltage Supercapacitors

With the boom of flexible electronic products and wearable devices, flexible energy storage devices, for example, supercapacitors with high performance, are attracting increasing interest. A flexible water-deactivated polyelectrolyte hydrogel electrolyte with good mechanical properties and high ionic conductivity was prepared by using an anionic polymer, carboxy methyl cellulose, and a cationic monomer, methacrylamidopropyltrimethyl ammonium chloride. It was then applied in a supercapacitor with flexible activated carbon electrodes. This flexible supercapacitor possesses a high operating voltage of 2.1 V owing to the low electrochemical activity for water within the hydrogel as a result of the 'molecular cages' effect and hydrophilic interactions between functional groups and surrounding water molecules. Furthermore, this supercapacitor exhibits good flexibility and tailorability. As the first example of water-deactivated polyelectrolyte hydrogel electrolytes in applications involving flexible high-voltage supercapacitors, this work provides a platform for the design of energy storage devices with high energy density for flexible and wearable electronic devices.

Design and preparation of bi-functionalized short-chain modified zwitterionic nanoparticles

An ideal nanomaterial for use in the bio-medical field should have a distinctive surface capable of effectively preventing nonspecific protein adsorption and identifying target bio-molecules. Recently, the short-chain zwitterion strategy has been suggested as a simple and novel approach to create outstanding anti-fouling surfaces. In this paper, the carboxyl end group of short-chain zwitterion-coated silica nanoparticles (SiO₂-ZWS) was found to be difficult to functionalize via a conventional EDC/NHS strategy due to its rapid hydrolysis side-reactions. Hence, a series of bi-functionalized silica nanoparticles (SiO₂-ZWS/COOH) were designed and prepared by controlling the molar ratio of 3-aminopropyltriethoxysilane (APTES) to short-chain zwitterionic organosiloxane (ZWS) in order to achieve above goal. The synthesized SiO₂-ZWS/COOH had similar excellent anti-fouling properties compared with SiO₂-ZWS, even in 50% fetal bovine serum characterized by DLS and turbidimetric titration. Subsequently, SiO₂-ZWS/COOH_5/1 was chosen as a representative and then demonstrated higher detection signal intensity and more superior signal-to-noise ratios compare with the pure SiO₂-COOH when they were used as a bio-carrier for chemiluminescence enzyme immunoassay (CLEIA). These unique bi-functionalized silica nanoparticles have many potential applications in the diagnostic and therapeutic fields.

STATEMENT OF SIGNIFICANCE

Reducing nonspecific protein adsorption and enhancing the immobilized efficiency of specific bio-probes are two of the most important issues for bio-carriers, particularly for a nanoparticle based bio-carrier. Herein, we designed and prepared a bi-functional nanoparticle with anti-fouling property and bio conjugation capacity for further bioassay by improving the short-chain zwitterionic modification strategy we have proposed previously. The heterogeneous surface of this nanoparticle showed effective anti-fouling properties both in model protein solutions and fetal bovine serum (FBS). The modified nanoparticles can also be successfully functionalized with a specific antibody for CLEIA assay with a prominent bio-detection performance even in 50% FBS. In this paper, we also investigated an unexpectedly fast hydrolysis behavior of NHS-activated carboxylic groups within the pure short-chain zwitterionic molecule that led to no protein binding in the short-chain zwitterion modified nanoparticle. Our findings pave a new way for the designing of high performance bio-carriers, demonstrating their strong potential as a robust platform for diagnosis and therapy.

Surface Characterization and Platelet Adhesion on Thin Hydrogel Films of Poly(vinyl ether)

Poly(vinyl ether), with short oxyethylene side chains which possess a simple and relatively polar structure, should be a unique candidate for a bioinert material thanks to its solubility in water. On the basis of living cationic copolymerization and subsequent ultraviolet light irradiation, thin films of poly(2-methoxyethyl vinyl ether) with different cross-linking densities were prepared on solid substrates. The films were thickened in water, and the extent was dependent on the cross-linking density. Although the surface chemistry and aggregation states were almost identical to one another, the stiffness, or the softness, of the outermost region in the film was strongly dependent on the cross-linking density. That is, the interface between polymer and water became thicker, or more diffused, with decreasing cross-linking density. The blood compatibility based on the platelet adhesion on to the hydrogel films was better for a more diffused interface.

Impact of the Hydration States of Polymers on Their Hemocompatibility for Medical Applications: A Review

Water has a key role in the functioning of all biological systems, it mediates many biochemical reactions, as well as other biological activities such as material biocompatibility. Water is often considered as an inert solvent, however at the molecular level, it shows different behavior when sorbed onto surfaces like polymeric implants. Three states of water have been recognized: non-freezable water, which does not freeze even at -100 °C; intermediate water, which freezes below 0 °C; and, free water, which freezes at 0 °C like bulk water. This review describes the different states of water and the techniques for their identification and quantification, and analyzes their relationship with hemocompatibility in polymer surfaces. Intermediate water content higher than 3 wt % is related to better hemocompatibility for poly(ethylene glycol), poly(meth)acrylates, aliphatic carbonyls, and poly(lactic-co-glycolic acid) surfaces. Therefore, characterizing water states in addition to water content is key for polymer selection and material design for medical applications.

Inhibition of protein aggregation by zwitterionic polymer-based core-shell nanogels

Protein aggregation is a process by which misfolded proteins polymerizes into aggregates and forms fibrous structures with a β-sheet conformation, known as amyloids. It is an undesired outcome, as it not only causes numerous neurodegenerative diseases, but is also a major deterrent in the development of protein biopharmaceuticals. Here, we report a rational design for the synthesis of novel zwitterionic polymer-based core-shell nanogels via controlled radical polymerization. Nanogels with different sizes and functionalities in the core and shell were prepared. The nanogels exhibit remarkable efficiency in the protection of lysozyme against aggregation. Addition of nanogels suppresses the formation of toxic fibrils and also enables lysozyme to retain its enzymatic activity. Increasing the molecular weight and degree of hydrophobicity markedly increases its overall efficiency. Investigation of higher order structures revealed that lysozyme when heated without any additive loses its secondary structure and transforms into a random coil conformation. In contrast, presence of nanogels facilitates the retention of higher order structures by acting as molecular chaperones, thereby reducing molecular collisions. The present study is the first to show that it is possible to design zwitterionic nanogels using appropriate polymerization techniques that will protect proteins under conditions of extreme stress and inhibit aggregation.

Low-fouling and functional poly(carboxybetaine) coating via a photo-crosslinking process

Antifouling modification technology is developed for many biomedical applications such as blood-contact devices and biosensors.

Self-assembling characteristics of amphiphilic zwitterionic brush random copolymers at the air–water interface

Amphiphilic zwitterionic brush random copolymers bearing sulfobetaine groups at the bristle ends underwent segregation at the air–water interface, always forming only the Langmuir monolayer structure rather than any other structures.

Anion Specificity of Polyzwitterionic Brushes with Different Carbon Spacer Lengths and Its Application for Controlling Protein Adsorption

Both ion-specific interaction and carbon spacer length have strong effects on the properties of polyzwitterions. In this work, we have investigated the anion specificity of poly(sulfobetaine methacrylamide) (PSBMAm) brushes with different carbon spacer lengths. The effectiveness of anions to enhance the hydration of the PSBMAm brushes increases from kosmotropic to chaotropic anions. The interactions between the anions and the PSBMAm brushes are strongly influenced by carbon spacer length because the strength of inter/intrachain association of the PSBMAm brushes decreases with increasing carbon spacer length. The inter/intrachain association of the PSBMAm brushes with a longer carbon spacer is easier to break by the external anions in the high salt concentration regime. On the other hand, a longer carbon spacer is more favorable for the zwitterionic groups to form cyclic intramolecular structures. As a result, the addition of anions can more effectively enhance the hydration of the PSBMAm brushes with a medium-length carbon spacer compared with that of the PSBMAm brushes with a either shorter or longer carbon spacer in the low salt concentration regime, determined by the balance between the inter/intrachain association and the formation of cyclic intramolecular structures. Our study also demonstrates that both anion identity and carbon spacer length can be used to control protein adsorption on the surface of the PSBMAm brushes.

Heterogeneous surfaces to repel proteins

The nonspecific adsorption of proteins is usually undesirable on solid surfaces as it induces adverse responses, such as platelet adhesion on medical devices, negative signals of biosensors and contamination blockage of filtration membranes. Thus, an important scheme in material science is to design and fabricate protein-repulsive surfaces. Early approaches in this field focused on homogeneous surfaces comprised of single type functionality. Yet, recent researches have demonstrated that surfaces with heterogeneities (chemistry and topography) show promising performance against protein adsorption. In this review, we will summarize the recent achievements and discuss the new perspectives in the research of developing and characterizing heterogeneous surfaces to repel proteins. The protein repulsion mechanisms of different heterogeneous surfaces will also be discussed in details, followed by the perspective and challenge of this emerging field.

Characterization of water state and distribution in fibre materials by low-field nuclear magnetic resonance

The states of absorbed water in the cotton and PET fibres materials characterized by LF-NMR method.