Fluorescent Polyurethane Nanocapsules Prepared via Inverse Miniemulsion: Surface Functionalization for Use as Biocarriers

Nanoemulsions for synthesis of biomedical nanocarriers

Nanoemulsions are kinetically stabilized emulsions with droplet sizes in the nanometer scale. These nanodroplets are able to confine spaces in which reactions of polymerization or precipitation can take place, leading to the formation of particles and capsules that can act as nanocarriers for biomedical applications. This review discusses the different possibilities of using nanoemulsions for preparing biomedical nanocarriers. According to the chemical nature, nanocarriers prepared in nanoemulsions are classified in polymeric, inorganic, or hybrid. The main synthetic strategies for each type are revised, including miniemulsion polymerization, nanoemulsion-solvent evaporation, spontaneous emulsification, sol-gel processes, and combination of different techniques to form multicomponent materials.

Release of the model drug SR101 from polyurethane nanocapsules in porcine hair follicles triggered by LED-derived low dose UVA light

Hair follicles (HFs) are important drug delivery targets for the therapy of miscellaneous skin diseases and for skin antisepsis. Furthermore, HFs significantly contribute to drug delivery of topically applied substances. Nanoparticulate systems are excellently suited for follicular drug delivery as they entail the opportunity of directed drug transport into HFs. Moreover, they involve the possibility of an intrafollicular drug release initiated by extrinsic or intrinsic trigger mechanisms. In this study, we present a novel preclinical model for an anatomically and temporally targeted intrafollicular drug release. In vitro release kinetics of the model drug sulforhodamine 101 (SR101) from newly synthesized ultraviolet A (UVA)-responsive polyurethane nanocapsules (NCs) were investigated by fluorescence spectroscopy. Low power density UVA radiation provided by a UVA light emitting diode (LED) induced a drug release of over 50% after 2 min. We further utilized confocal laser scanning microscopy (CLSM) to investigate follicular penetration as well as intrafollicular drug release on an ex vivo porcine ear skin model. UVA-responsive degradation of the NCs at a mean follicular penetration depth of 509 ± 104 µm ensured liberation of SR101 in the right place and at the right time. Thus, for the first time a UVA-triggered drug release from NCs within HFs was demonstrated in the present study. Cytotoxicity tests revealed that NCs synthesized with isophorone diisocyanate show sufficient biocompatibility after UVA-induced cleavage. A considerable and controllable release of various water-soluble therapeutics could be reached by means of the presented system without risking any radiation-related tissue damage. Therefore, the implementation of the presented system into clinical routine, e.g. for preoperative antisepsis of HFs, appears very promising.

Solid Polymeric Nanoparticles of Albendazole: Synthesis, Physico-Chemical Characterization and Biological Activity

Albendazole is a benzimidazole derivative with documented antitumor activity and low toxicity to healthy cells. The major disadvantage in terms of clinical use is its low aqueous solubility which limits its bioavailability. Albendazole was incorporated into stable and homogeneous polyurethane structures with the aim of obtaining an improved drug delivery system model. Spectral and thermal analysis was used to investigate the encapsulation process and confirmed the presence of albendazole inside the nanoparticles. The in vitro anticancer properties of albendazole encapsulated in polyurethane structures versus the un-encapsulated compound were tested on two breast cancer cell lines, MCF-7 and MDA-MB-231, in terms of cellular viability and apoptosis induction. The study showed that the encapsulation process enhanced the antitumor activity of albendazole on the MCF-7 and MDA-MB-23 breast cancer lines. The cytotoxic activity manifested in a concentration-dependent manner and was accompanied by changes in cell morphology and nuclear fragmentation.

Ceria/polymer nanocontainers for high-performance encapsulation of fluorophores

We report the synthesis of high-performance organic-inorganic hybrid fluorescent nanocapsules comprising a polymer shell armored with an inorganic layer and a liquid core containing a fluorophore. The polymeric capsules are synthesized by free radical miniemulsion polymerization and contain covalently bound carboxylate surface functionalities that allow for the binding of metal ions through electrostatic interaction. A cerium(IV) oxide nanoparticle layer, formed in situ at the surface of the hybrid nanocapsules, acts as oxygen scavenger and keeps external reactive molecular oxygen from entering into the capsules, eventually resulting in a reduction of the photooxidation of encapsulated fluorescent molecules. This approach shows an increase in the fluorescence of the model organic fluorophore terrylene diimide by avoiding the ground-state molecular oxygen to react with electronically excited states of the fluorescent hydrocarbon molecule.

Simple and Flexible Model for Laser-Driven Antibody-Gold Surface Interactions: Functionalization and Sensing

Interactions between biomolecules and between substrates and biomolecules is a crucial issue in physics and applications to topics such as biotechnology and organic electronics. The efficiency of bio- and mechanical sensors, of organic electronics systems, and of a number of other devices critically depends on how molecules are deposited on a surface so that these acquire specific functions. Here, we tackle this vast problem by developing a coarse grained model of biomolecules having a recognition function, such as antibodies, capable to quantitatively describe in a simple manner essential phenomena: antigen-antibody and antibody substrate interactions. The model is experimentally tested to reproduce the results of a benchmark case, such as (1) gold surface functionalization with antibodies and (2) antibody-antigen immune-recognition function. The agreement between experiments and model prediction is excellent, thus unveiling the mechanism for antibody immobilization onto metals at the nanoscale in various functionalization schemes. These results shed light on the geometrical packing properties of the deposited molecules, and may open the way to a novel coarse-grained based approach to describe other processes where molecular packing is a key issue with applications in a huge number of fields from nano- to biosciences.

Multifunctionalized polyurethane-polyurea nanoparticles: hydrophobically driven self-stratification at the o/w interface modulates encapsulation stability

Polyurethane-polyurea (PUUa) reactive prepolymers with adjusted hydrophobic and hydrophilic dangling chains to achieve multiwalled sub-30 nm nanoparticles are presented. The combination of an amphiphilic and a hydrophobic prepolymer at the oil-water interface creates a stratified shell by hydrophobic interactions. These novel nanostructures enhance the encapsulation stability of lipophilic compounds compared to monowalled nanostructures and facilitate the selective and ordered functionalization along the multiwalled shell with bioactive motifs. As proof of concept, PUUa nanoparticles have been engineered with disulfide bonds and an α_vβ₃ integrin-selective cyclic RGD peptide (cRGDfK) providing our system with glutathione (GSH) triggered controlled release and cell targeting specificity to U87 tumor cells.

Biocompatible Glycopolymer Nanocapsules via Inverse Miniemulsion Periphery RAFT Polymerization for the Delivery of Gemcitabine

Encapsulation of hydrophilic cancer drugs in polymeric nanocapsules was achieved in a one-pot process via the inverse miniemulsion periphery RAFT polymerization (IMEPP) approach. The chosen guest molecule was gemcitabine hydrochloride, which is used as the first-line treatment of pancreatic cancer. The resulting nanocapsules were confirmed to be ∼200 nm, with excellent encapsulation (∼96%) and loading (∼12%) efficiency. Postpolymerization reaction was successfully conducted to create glyocopolymer nanocapsules without any impact on the loads as well as the nanocapsules size or morphology. The loaded nanocapsules were specifically designed to be responsive in a reductive environment. This was confirmed by the successful disintegration of the nanocapsules in the presence of glutathione. The gemcitabine-loaded nanocapsules were tested in vitro against pancreatic cancer cells (AsPC-1), with the results showing an enhancement in the cytotoxicity by two fold due to selective accumulation and release of the nanocapsules within the cells. The results demonstrated the versatility of IMEPP as a tool to synthesize functionalized, loaded-polymeric nanocapsules suitable for drug-delivery application.

Polyurethane Microstructures-a Good or Bad in vitro Partner for the Isoflavone Genistein?

In recent years polyurethane microstructures (PM) have gained increasing attention in the pharmaceutical field due to the importance of their practical application. Since finding that such a formulation with genistein could improve its applications, we have conducted a preliminary study regarding the in vitro antiproliferative (MCF7, MDA-MB-231 and T47D) and antimicrobial ( Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Salmonella enteritidis (D), Bacillus subtilis, B. cereus, and Candida albicans) activity in order to test whether polyurethane micro structuresre present a good option for further modulation of genistein's bioavailability. It was concluded that the polyurethane micro structures are a bad in vitro partner for the isoflavone genistein.

Interfacial thiol–isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation

Design of nanocarriers with tunable morphology using the in situ thiol–isocyanate interfacial reactions.

Synthesis of pH-Responsive Nanocapsules via Inverse Miniemulsion Periphery RAFT Polymerization and Post-Polymerization Reaction

We report herein the versatility of inverse miniemulsion periphery RAFT polymerization (IMEPP) and postpolymerization reaction in producing pH-responsive nanocapsules with different functionalities. The robustness of the polymeric nanocapsules was confirmed by their ability to undergo reactions, be dried, and be redispersed in various solvents without any changes in size and core-shell morphology. Nanocapsules bearing carboxylic acid (COOH) functionalities were produced via hydrolysis, while nanocapsules bearing tertiary-amine (N-X₃) functionalities were synthesized via aminolysis. The responsive behavior of the nanocapsules was tested in aqueous solution with pHs ranging from 3 to 12. Nanocapsules with COOH functionalities were found to swell under basic conditions due to the deprotonated carboxylate ions. In contrast, nanocapsule with tertiary amine functionalities underwent swelling in acidic conditions.

Nanoparticles from renewable polymers

The use of polymers from natural resources can bring many benefits for novel polymeric nanoparticle systems. Such polymers have a variety of beneficial properties such as biodegradability and biocompatibility, they are readily available on large scale and at low cost. As the amount of fossil fuels decrease, their application becomes more interesting even if characterization is in many cases more challenging due to structural complexity, either by broad distribution of their molecular weights (polysaccharides, polyesters, lignin) or by complex structure (proteins, lignin). This review summarizes different sources and methods for the preparation of biopolymer-based nanoparticle systems for various applications.

Enhanced in vivo targeting of murine nonparenchymal liver cells with monophosphoryl lipid A functionalized microcapsules

A broad spectrum of infectious liver diseases emphasizes the need of microparticles for targeted delivery of immunomodulatory substances to the liver. Microcapsules (MCs) are particularly attractive for innovative drug and vaccine formulations, enabling the combination of antigen, drugs, and adjuvants. The present study aimed to develop microcapsules characterized by an enhanced liver deposition and accelerated uptake by nonparenchymal liver cells (NPCs). Initially, two formulations of biodegradable microcapsules were synthesized from either hydroxyethyl starch (HES) or mannose. Notably, HES-MCs accumulated primarily in the liver, while mannose particles displayed a lung preference. Functionalization of HES-MCs with anti-CD40, anti-DEC205, and/or monophosphoryl lipid A (MPLA) enhanced uptake of MCs by nonparenchymal liver cells in vitro. In contrast, only MPLA-coated HES-MCs promoted significantly the in vivo uptake by NPCs. Finally, HES-MCs equipped with MPLA, anti-CD40, and anti-DEC205 induced the secretion of TNF-α, IL-6 by Kupffer cells (KCs), and IFN-γ and IL-12p70 by liver dendritic cells (DCs). The enhanced uptake and activation of KCs by MPLA-HES-MCs is a promising approach to prevent or treat infection, since KCs are exploited as an entry gate in various infectious diseases, such as malaria. In parallel, loading and activating liver DCs, usually prone to tolerance, bears the potential to induce antigen specific, intrahepatic immune responses necessary to prevent and treat infections affecting the liver.

Synthesis of nanostructured materials in inverse miniemulsions and their applications

Polymeric nanogels, inorganic nanoparticles, and organic-inorganic hybrid nanoparticles can be prepared via the inverse miniemulsion technique. Hydrophilic functional cargos, such as proteins, DNA, and macromolecular fluoresceins, may be conveniently encapsulated in these nanostructured materials. In this review, the progress of inverse miniemulsions since 2000 is summarized on the basis of the types of reactions carried out in inverse miniemulsions, including conventional free radical polymerization, controlled/living radical polymerization, polycondensation, polyaddition, anionic polymerization, catalytic oxidation reaction, sol-gel process, and precipitation reaction of inorganic precursors. In addition, the applications of the nanostructured materials synthesized in inverse miniemulsions are also reviewed.

Absolute quantitation of sub-micrometer particles in cells by flow cytometry

Absolute quantitative measurements of nanoparticle (NP) uptake are a prerequisite to determine doses of NPs in pharmacological and toxicological studies. However, absolute quantitation is rarely reported, hindering the comparison between different studies. Here, a new flow cytometric approach is presented to analyze fluorescent NPs with a "standard" non-scanning flow cytometer and to quantify them inside cells. The mean fluorescence intensity of a single particle and the particle concentration (NPs per μL medium) are obtained. A routine for rapid quantitative counting of the endocytosed NPs in HeLa cells by flow cytometry (FC) is developed and validated by confocal laser scanning microscopy. As a proof-of-concept, the quantitative measurements show that the cellular uptake efficiency of negatively charged poly(methyl methacrylate) NPs is very low, that is, in the range of 10(-3) % of the added particle amount.

Enzyme cleavable nanoparticles from peptide based triblock copolymers

A solid-phase synthesis based approach towards protease cleavable polystyrene-peptide-polystyrene triblock copolymers and their formulation to nanoparticulate systems is presented. These nanoparticles are suitable for the optical detection of an enzyme and have the potential for application as a drug delivery system. Two different peptide sequences, one cleaved by trypsin (GFF), the other by hepsin (RQLRVVGG), a protease overexpressed in early stages of prostate cancer, are used as the central part of the triblock. For optical detection a fluorophore-quencher pair is introduced around the cleavage sequence. The solid phase synthesis is conduced such that two identical sequences are synthesized from one branching point. Eventually, carboxy-terminated polystyrene is introduced into the peptide synthesizer and coupled to the amino-termini of the branched sequence. Upon cleavage, a fragment is released from the triblock copolymer, which has the potential for use in drug delivery applications. Conducting the whole synthesis on a solid phase in the peptide synthesizer avoids solubility issues and post-synthetic purification steps. Due to the hydrophobic PS-chains, the copolymer can easily be formulated to form nanoparticles using a nanoprecipitation process. Incubation of the nanoparticles with the respective enzymes leads to a significant increase of the fluorescence from the incorporated fluorophore, thereby indicating cleavage of the peptide sequence and decomposition of the particles.

Complex encounters: nanoparticles in whole blood and their uptake into different types of white blood cells

Aim: A whole blood assay for evaluating the uptake of nanoparticles into white blood cells in order to close the gap between basic studies in cell culture and pharmacokinetic studies in animals was developed. Materials & methods: After drawing peripheral blood into standard blood collection vials with different anticoagulants, amino- and carboxy-functionalized polymeric styrene nanoparticles were added and uptake was evaluated by flow cytometry. Results: By counterstaining surface markers of leukocytes (e.g., monocytes, neutrophil granulocytes, B or T lymphocytes), investigations of different cell types can be conducted in a single run by flow cytometry. The authors demonstrated that anticoagulation should be done with heparin, and not EDTA, in order to prevent hampering of uptake mechanisms. Conclusion: By using heparinized whole blood, the authors demonstrated differences and usefulness of this assay for screening cellular uptake as it should occur in the bloodstream. Nevertheless, animal studies are warranted for final assessment of the nanoparticles.

Original submitted 11 November 2011; Revised submitted 1 July 2012; Published online 31 August 2012

Tenside-free preparation of nanogels with high functional β-cyclodextrin content

We present the preparation of ultrafine (R(h), 50 -150 nm) nanogels through tenside-free condensation of reactive prepolymers with β-cyclodextrin (β-CD) in water. These nanogels possess a maximum content of 60 wt % functional β-CD that can form inclusion complexes as demonstrated by dye sorption with phenolphthalein. Aside of this extremely high uptake capacity to hydrophobic molecules, the nanogels also show good adhesion to surfaces in homogeneous distribution with size of R(h) of 25 nm under dry conditions.

Suppressing unspecific cell uptake for targeted delivery using hydroxyethyl starch nanocapsules

Synthesizing nanocarriers with stealth properties and delivering a "payload" to the particular organ remains a big challenge but is the prime prerequisite for any in vivo application. As a nontoxic alternative to the modification by poly(ethylene glycol) PEG, we describe the synthesis of cross-linked hydroxyethyl starch (HES, M(w) 200,000 g/mol) nanocapsules with a size range of 170-300 nm, which do not show nonspecific uptake into cells. The specific uptake was shown by coupling a folic acid conjugate as a model targeting agent onto the surface of the nanocapsules, because folic acid has a high affinity to a variety of human carcinoma cell lines which overexpress the folate receptor on the cell surface. The covalent binding of the folic acid conjugate onto HES capsules was confirmed by FTIR and NMR spectroscopy. The coupling efficiency was determined using fluorescence spectroscopy. The specific cellular uptake of the HES nanocapsules after folic acid coupling into the folate-receptor presenting cells was studied by confocal laser scanning microscopy (CLSM) and flow cytometry.

Preparation of dually, pH- and thermo-responsive nanocapsules in inverse miniemulsion

pH- and thermo-sensitive nanocapsules were successfully synthesized via inverse miniemulsion copolymerization of N-isopropyl acrylamide (NIPAM), N,N'-methylene bisacrylamide (MBA), and a functional monomer, 4-vinyl pyridine (4-VP). The size and size distribution of nanocapsules were measured by dynamic light scattering (DLS). The particle morphology was observed by transmission electron microscopy (TEM). The final morphology of particles was strongly influenced by the hydrophobicity of functional monomers. The use of a hydrophilic functional monomer, acrylic acid, led to the formation of solid particles, while the use of the more hydrophobic functional monomer, 4-VP, resulted in the formation of nanocapsules. The particle morphology, size, and size distribution were investigated in terms of the content of 4-VP, MBA, and the type and content of surfactant. The pH- and thermo-sensitivities were characterized by measuring the size variation with the change of temperature and pH. The organic-inorganic nanocapsules were prepared by coating a layer of silica particles on the surface of the sensitive nanocapsules.

A miniemulsion polymerization technique for encapsulation of silicon quantum dots in polymer nanoparticles

Miniemulsion polymerization techniques were used to encapsulate luminescent alkylated silicon quantum dots (Si-QDs) within polymer nanoparticles composed of styrene and 4-vinylbenzaldehyde monomers. The polymer nanoparticles had mean diameters in the range 90-150 nm depending on the reaction conditions, however all samples showed narrow particle size distributions, as determined by dynamic light scattering and atomic force microscopy. The Si-QDs were found to have a small, but beneficial effect on the polymerization process by reducing the polydispersity of the final polymer particles, which we attribute to co-surfactant action of the undecene used to form the alkyl capping layer on the Si-QDs. Confocal microspectroscopy was used to confirm that the luminescent alkylated Si-QDs were encapsulated within the polymer nanoparticles and also provided luminescence and Raman spectra which show peaks corresponding to both alkylated Si-QDs and the polymer nanoparticles. Treatment of the polymer nanoparticles with dilute aqueous sodium hydroxide solution, which is known to corrode Si and extinguish the luminescence of alkylated Si-QDs, results in only a partial reduction in luminescence suggesting that the majority of the alkylated Si-QDs are encapsulated sufficiently deep within the polymer matrix to protect them from alkaline attack. Miniemulsion polymerization of the monomers styrene and 4-vinylbenzaldehyde affords polymer nanoparticles displaying reactive aldehyde groups upon their surfaces, which could then be decorated with a selection of molecules through imine, oxime or hydrazone condensation reactions. We speculate that polymer-SiQD composite nanoparticles whose surfaces can be further decorated will increase the utility of luminescent Si-QDs in applications such as anti-counterfeiting and as probes of biological processes.

Miniemulsion polymerization as a versatile tool for the synthesis of functionalized polymers

The miniemulsion technique is a particular case in the family of heterophase polymerizations, which allows the formation of functionalized polymers by polymerization or modification of polymers in stable nanodroplets. We present here an overview of the different polymer syntheses within the miniemulsion droplets as reported in the literature, and of the current trends in the field.

Characterization of MRI contrast agent-loaded polymeric nanocapsules as versatile vehicle for targeted imaging

Various contrast agents (Magnevist, Gadovist and Multihance) loaded into polymeric nanocapsules were synthesized by the inverse miniemulsion technique. The relaxivity of the resultant contrast agents was assessed at 1.5 T magnetic field strength. The ionic relaxivity of the contrast agents could at least be maintained after their encapsulation in different polymer capsules. The chemical composition of the nanocapsules was characterized by Fourier transform infrared spectroscopy. The distribution of the contrast agent in the nanocapsules could be identified by energy filtered transmission electron microscopy and energy dispersive X-ray spectroscopy. The results indicate entrapment of the gadolinium complex into the inner shell of the polymeric nanocapsules. The payload of contrast agent per nanocapsule resulted in some 2.5 x 10(6) Gd(3+) complexes yielding a particle-based relaxivity of 10.75 x 10(6) mM(-1) s(-1). Maintained or even slightly increased ionic relaxivity of the different contrast agents after encapsulation in combination with high payloads and the possibility of functionalization of the capsules' surface facilitate the application of the nanocapsules as promising targeted contrast agents for MRI.