Reversible pH-Dependent Properties of Multilayer Microcapsules Made of Weak Polyelectrolytes

Anti-Viral Surfaces in the Fight against the Spread of Coronaviruses

This review is conducted against the background of nanotechnology, which provides us with a chance to effectively combat the spread of coronaviruses, and which primarily concerns polyelectrolytes and their usability for obtaining protective function against viruses and as carriers for anti-viral agents, vaccine adjuvants, and, in particular, direct anti-viral activity. This review covers nanomembranes in the form of nano-coatings or nanoparticles built of natural or synthetic polyelectrolytes--either alone or else as nanocomposites for creating an interface with viruses. There are not a wide variety of polyelectrolytes with direct activity against SARS-CoV-2, but materials that are effective in virucidal evaluations against HIV, SARS-CoV, and MERS-CoV are taken into account as potentially active against SARS-CoV-2. Developing new approaches to materials as interfaces with viruses will continue to be relevant in the future.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Effects of Feed Solution pH on Polyelectrolyte Multilayer Nanofiltration Membranes

Over the past decade polyelectrolyte multilayer (PEM)-based membranes have gained a lot of interest in the field of nanofiltration (NF) as an alternative to conventional polyamide-based thin film composite membranes. With great variety in fabrication conditions, these membranes can achieve superior properties such as high chemical resistance and excellent filtration performance. Some of the most common polyelectrolytes used to prepare NF membranes are weak, meaning that their charge density depends on pH within the normal window of operation relevant for potential applications (pH 0-14). This might cause a dependency of membrane properties on the pH of filtered solutions, as indicated by other applications of PEMs. In this work, the susceptibility of membrane structure (swelling and surface charge) and performance (permeability, molecular weight cutoff, and salt retention) toward the pH of the filtration solution was studied for four fundamentally different PEM systems: poly(diallyldimethylammonium chloride) (PDADMAC)/poly(sodium-4-styrenesulfonate) (PSS) (strong/strong), poly(allylamine hydrochloric acid) (PAH)/poly(acrylic acid) (PAA) (weak/weak), and PAH/PSS (weak/strong) and PAH/PSS+PAH/PAA (asymmetric). Slight variations in structure and performance of the PDADMAC/PSS-based membranes were observed. On the contrary, structure and performance of PAH/PAA-based membranes are very susceptible to feed solution pH. A continuous change in charge density with variation in pH significantly affects salt retention. An increased swelling at pH 9 translates to variation in permeability and molecular weight cutoff of the membrane. The susceptibility of PAH/PSS-based membranes to pH is less pronounced compared to the PAH/PAA-based membranes since only one of the polyelectrolytes involved is weak. No structural changes were observed, indicating additional specific interactions between the polyelectrolytes other than electrostatic forces that stabilize film structure. A combination of the PAH/PSS and PAH/PAA system (8 + 2 bilayers) also displays a clear dependency of both membrane structure and performance on solution pH, where PAH/PSS is dominating due to a higher bilayer number.

Surface Modification with Particles Coated or Made of Polymer Multilayers

The coating of particles or decomposable cores with polyelectrolytes via Layer-by-Layer (LbL) assembly creates free-standing LbL-coated functional particles. Due to the numerous functions that their polymers can bestow, the particles are preferentially selected for a plethora of applications, including, but not limited to coatings, cargo-carriers, drug delivery vehicles and fabric enhancements. The number of publications discussing the fabrication and usage of LbL-assembled particles has consistently increased over the last vicennial. However, past literature fails to either mention or expand upon how these LbL-assembled particles immobilize on to a solid surface. This review evaluates examples of LbL-assembled particles that have been immobilized on to solid surfaces. To aid in the formulation of a mechanism for immobilization, this review examines which forces and factors influence immobilization, and how the latter can be confirmed. The predominant forces in the immobilization of the particles studied here are the Coulombic, capillary, and adhesive forces; hydrogen bonding as well as van der Waal's and hydrophobic interactions are also considered. These are heavily dependent on the factors that influenced immobilization, such as the particle morphology and surface charge. The shape of the LbL particle is related to the particle core, whereas the charge was dependant on the outermost polyelectrolyte in the multilayer coating. The polyelectrolytes also determine the type of bonding that a particle can form with a solid surface. These can be via either physical (non-covalent) or chemical (covalent) bonds; the latter enforcing a stronger immobilization. This review proposes a fundamental theory for immobilization pathways and can be used to support future research in the field of surface patterning and for the general modification of solid surfaces with polymer-based nano- and micro-sized polymer structures.

Layer-by-Layer Assembled Nanostructured Lipid Carriers for CD-44 Receptor-Based Targeting in HIV-Infected Macrophages for Efficient HIV-1 Inhibition

Macrophages act as a cellular reservoir in HIV infection. Elimination of HIV from macrophages has been an unfulfilled dream due to the failure of drugs to reach them. To address this, we developed CD44 receptor-targeted, novel hyaluronic acid (HA)-coated nanostructured lipid carriers (NLCs) of efavirenz via washless layer-by-layer (LbL) assembly of HA and polyallylamine hydrochloride (PAH). NLCs were subjected to TEM analysis, size and zeta potential, in vitro release and encapsulation efficiency studies. The uptake of NLCs in THP-1 cells was studied using fluorescence microscopy and flow cytometry. The anti-HIV efficacy was evaluated using p24 antigen inhibition assay. NLCs were found to be spherical in shape with anionic zeta potential (-23.66 ± 0.87 mV) and 241.83 ± 5.38 nm particle size. NLCs exhibited prolonged release of efavirenz during in vitro drug release studies. Flow cytometry revealed 1.73-fold higher uptake of HA-coated NLCs in THP-1 cells. Cytotoxicity studies showed no significant change in cell viability in presence of NLCs as compared with the control. HA-coated NLCs distributed throughout the cell including cytoplasm, plasma membrane and nucleus, as observed during fluorescence microscopy. HA-coated NLCs demonstrated consistent and significantly higher inhibition (81.26 ± 1.70%) of p24 antigen which was 2.08-fold higher than plain NLCs. The obtained results suggested preferential uptake of HA-coated NLCs via CD44-mediated uptake. The present finding demonstrates that HA-based CD44 receptor targeting in HIV infection is an attractive strategy for maximising the drug delivery to macrophages and achieve effective viral inhibition.

Development of Multifunctional Coating of Textile Materials Using Silver Microencapsulated Compositions

The efficiency of the method for the synthesis of silver nanoparticles using a system containing oxalic dialdehyde as a reducing agent, and polyguanidine as a stabilizer is shown. An analysis of the data of photon correlation spectroscopy characterizing the sizes of the formed particles in the Ag-polyelectrolyte system is presented. It has been established that the synthesized silver nanoparticles have a stable biocidal effect. The system of biodegradable polyelectrolytes chitosan-xanthan gum for the synthesis of the capsule shell including silver nanoparticles is selected. This will allow the formation of stable polyelectrolyte capsule shells containing oyster mushroom mycelium extract. A protocol for the synthesis of microcapsules by the method of sequential adsorption of chitosan polyelectrolytes and xanthan gum on calcium carbonate templates was developed. Silver nanoparticles are included in the capsule shell, and a biologically active drug (oyster mushroom mycelium extract) is included in the core. The technological mode of complex capsules immobilization on a textile material by the layer-by-layer method is described. The immobilization of multilayer microcapsules on a fibrous substrate is provided by a system of polyelectrolytes: positively charged chitosan and negatively charged xanthan gum. The developed multifunctional coatings make it possible to impart multifunctional properties to textile materials: antibacterial, antimycotic, high hygroscopic properties.

Recent Advances in Surface Nanoengineering for Biofilm Prevention and Control. Part II: Active, Combined Active and Passive, and Smart Bacteria-Responsive Antibiofilm Nanocoatings

The second part of our review describing new achievements in the field of biofilm prevention and control, begins with a discussion of the active antibiofilm nanocoatings. We present the antibiofilm strategies based on antimicrobial agents that kill pathogens, inhibit their growth, or disrupt the molecular mechanisms of biofilm-associated increase in resistance and tolerance. These agents of various chemical structures act through a plethora of mechanisms targeting vital bacterial metabolic pathways or cellular structures like cell walls and cell membranes or interfering with the processes that underlie different stages of the biofilm life cycle. We illustrate the latter action mechanisms through inhibitors of the quorum sensing signaling pathway, inhibitors of cyclic-di-GMP signaling system, inhibitors of (p)ppGpp regulated stringent response, and disruptors of the biofilm extracellular polymeric substances matrix (EPS). Both main types of active antibiofilm surfaces, namely non-leaching or contact killing systems, which rely on the covalent immobilization of the antimicrobial agent on the surface of the coatings and drug-releasing systems in which the antimicrobial agent is physically entrapped in the bulk of the coatings, are presented, highlighting the advantages of each coating type in terms of antibacterial efficacy, biocompatibility, selective toxicity, as well as drawbacks and limitations. Developments regarding combined strategies that join in a unique platform, both passive and active elements are not omitted. In such platforms with dual functionality, passive and active strategies can be applied either simultaneously or sequentially. We especially emphasize those systems that can be reversely and repeatedly switched between the non-fouling status and the bacterial killing status, thereby allowing several bacteria-killing/surface regeneration cycles to be performed without significant loss of the initial bactericidal activity. Eventually, smart antibiofilm coatings that release their antimicrobial payload on demand, being activated by various triggers such as changes in local pH, temperature, or enzymatic triggers, are presented. Special emphasis is given to the most recent trend in the field of anti-infective surfaces, specifically smart self-defensive surfaces for which activation and switch to the bactericidal status are triggered by the pathogens themselves.

Effect of pH and Molecular Length on the Structure and Dynamics of Linear and Short-Chain Branched Poly(ethylene imine) in Dilute Solution: Scaling Laws from Detailed Molecular Dynamics Simulations

Atomistic molecular dynamics (MD) simulations are carried out to examine the effect of molecular weight M_w (= 0.6, 0.86, 1.12, and 2.15 kDa) and pH (or equivalently, degree of ionization, α⁺ = 0, 50, and 100%) on the structure, state of hydration, and dynamics of linear and branched poly(ethylene imine) (PEI) chains in infinitely dilute salt-free aqueous solutions. It is found that the degree of ionization is the key factor determining the type of molecular conformation adopted by PEI, regardless of molecular architecture and chain length, resulting in a stable trans conformation for fully ionized solutions and in a stable gauche⁺/gauche^- state for neutral or alternate ionized ones; in the latter case, a strong electrolyte behavior is verified for both linear and branched PEI. Linear PEI is observed to be significantly stiffer than branched PEI of the same molecular weight at 100% degree of ionization, but the effect subsides as the degree of ionization decreases. Also, linear PEI diffuses markedly slower than branched PEI of the same M_w. From the MD results, scaling exponents are deduced and reported for the conformation, solvent-accessible surface area, and dynamics of the two different PEI structures with M_w.

In Vitro Bioeffects of Polyelectrolyte Multilayer Microcapsules Post-Loaded with Water-Soluble Cationic Photosensitizer

Microencapsulation and targeted delivery of cytotoxic and antibacterial agents of photodynamic therapy (PDT) improve the treatment outcomes for infectious diseases and cancer. In many cases, the loss of activity, poor encapsulation efficiency, and inadequate drug dosing hamper the success of this strategy. Therefore, the development of novel and reliable microencapsulated drug formulations granting high efficacy is of paramount importance. Here we report the in vitro delivery of a water-soluble cationic PDT drug, zinc phthalocyanine choline derivative (Cholosens), by biodegradable microcapsules assembled from dextran sulfate (DS) and poly-l-arginine (PArg). A photosensitizer was loaded in pre-formed [DS/PArg]4 hollow microcapsules with or without exposure to heat. Loading efficacy and drug release were quantitatively studied depending on the capsule concentration to emphasize the interactions between the DS/PArg multilayer network and Cholosens. The loading data were used to determine the dosage for heated and intact capsules to measure their PDT activity in vitro. The capsules were tested using human cervical adenocarcinoma (HeLa) and normal human dermal fibroblast (NHDF) cell lines, and two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Our results provide compelling evidence that encapsulated forms of Cholosens are efficient as PDT drugs for both eukaryotic cells and bacteria at specified capsule-to-cell ratios.

The rise of bio-inspired polymer compartments responding to pathology-related signals

Self-organized nano- and microscale polymer compartments such as polymersomes, giant unilamellar vesicles (GUVs), polyion complex vesicles (PICsomes) and layer-by-layer (LbL) capsules have increasing potential in many sensing applications. Besides modifying the physicochemical properties of the corresponding polymer building blocks, the versatility of these compartments can be markedly expanded by biomolecules that endow the nanomaterials with specific molecular and cellular functions. In this review, we focus on polymer-based compartments that preserve their structure, and highlight the key role they play in the field of medical diagnostics: first, the self-assembling abilities that result in preferred architectures are presented for a broad range of polymers. In the following, we describe different strategies for sensing disease-related signals (pH-change, reductive conditions, and presence of ions or biomolecules) by polymer compartments that exhibit stimuli-responsiveness. In particular, we distinguish between the stimulus-sensitivity contributed by the polymer itself or by additional compounds embedded in the compartments in different sensing systems. We then address necessary properties of sensing polymeric compartments, such as the enhancement of their stability and biocompatibility, or the targeting ability, that open up new perspectives for diagnostic applications.

Multilayer capsules encapsulating nimbin and doxorubicin for cancer chemo-photothermal therapy

Layer-by-layer (LbL) assembled poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) microcapsules were designed to incorporate gold nanorods (NRs) and co-encapsulate and release two drugs for cancer therapy. Calcium carbonate (CaCO₃) microparticles modified with preformed NRs were used as sacrificial templates for the fabrication of hollow PAH/PMA/NR capsules incorporated with NRs. The hollow capsules were found to be 4.5 ± 0.5 µm in size and appeared with uniformly distributed NRs in the interior of the capsules. The morphology of the capsules transformed from pore free continuous structure to porous structure under laser light irradiation at 808 nm and 0.5 W cm^-2. The encapsulation experiments showed that the hydrophilic drug (doxorubicin hydrochloride, Dox) was encapsulated in the interior of the capsules while the hydrophobic drug (nimbin, NB) was entrapped in the porous polymeric network of the layer components. The encapsulation efficiency was found to be 30% for both Dox and NB. The release experiments showed an initial burst release followed by sustained release up to 3 h. Notably, the release was completed within 30 min under NIR irradiation at 808 nm. The estimated IC₅₀ values against THP-1 cells were 75 and 1.8 µM for NB and Dox, respectively. The dual drug loaded capsules showed excellent anticancer activity against THP-1 cells under NIR light exposure in in-vitro experiments. Thus, such remotely addressable dual-drug loaded capsules with the provision for encapsulation of natural drugs demonstrate high potential for use as theranostics in cancer therapy.

Swelling Behavior, Interaction, and Electrostatic Properties of Chitosan/Alginate Dialdehyde Multilayer Films with Different Outermost Layer

In this study, self-cross-linked chitosan/alginate dialdehyde multilayer films, capped with either alginate dialdehyde (6 layers) or chitosan (7 layers), were fabricated using the layer-by-layer method. The disruption of the electrostatic equilibrium when exposing the fabricated layers to acidic and alkaline conditions causes swelling within the film and independently in the outermost layer, showing dependence on the ionic strength. Spectroscopic ellipsometry and quartz crystal microbalance with dissipation monitoring were employed to examine the swelling behavior. Atomic force microscopy colloidal probe measurements were conducted to assess the surface forces between the multilayer films at different pH and ionic strengths. Finally, the electrostatic properties of the multilayer films were examined at different pH and ionic strengths using zeta potential measurements. The results suggest that stimuli-responsiveness and overall swelling behavior of the polysaccharide multilayer films significantly depend on the outermost layer, an effect that should expectedly become more pronounced the thinner the film becomes.

Multilayer capsules made of weak polyelectrolytes: a review on the preparation, functionalization and applications in drug delivery

Multilayer capsules have been of great interest for scientists and medical communities in multidisciplinary fields of research, such as drug delivery, sensing, biomedicine, theranostics and gene therapy. The most essential attributes of a drug delivery system are considered to be multi-functionality and stimuli responsiveness against a range of external and internal stimuli. Apart from the highly explored strong polyelectrolytes, weak polyelectrolytes offer great versatility with a highly controllable architecture, unique stimuli responsiveness and easy tuning of the properties for intracellular delivery of cargo. This review describes the progress in the preparation, functionalization and applications of capsules made of weak polyelectrolytes or their combination with biopolymers. The selection of a sacrificial template for capsule formation, the driving forces involved, the encapsulation of a variety of cargo and release based on different internal and external stimuli have also been addressed. We describe recent perspectives and obstacles of weak polyelectrolyte/biopolymer systems in applications such as therapeutics, biosensing, bioimaging, bioreactors, vaccination, tissue engineering and gene delivery. This review gives an emerging outlook on the advantages and unique responsiveness of weak polyelectrolyte based systems that can enable their widespread use in potential applications.

Micelle-Embedded Layer-by-Layer Coating with Catechol and Phenylboronic Acid for Tunable Drug Loading, Sustained Release, Mild Tissue Response, and Selective Cell Fate for Re-endothelialization

Tunable/sustained drug loading/releasing are of significance in addressing low cytotoxicity, long-term performance, and localized mild healing response in biomedical applications. With an ingenious design, a self-healing sandwiched layer-by-layer (LBL) coating was constructed by using chitosan/heparin as adopted polyelectrolytes with embedding of micelles, in which the chitosan backbone was grafted with catechol and the micelle was modified with exposed phenylboronic acid, endowing the coating with enhanced stability by abundant interactions among coating components (e.g., boric acid ester bond formation, weak intermolecular cross-linking, π-π interactions, and H-bonding). Moreover, rapamycin and atorvastatin calcium were selected as drug candidates and loaded into micelles, followed by drug-releasing behavior study. It was found that the LBL coating maintained a linear growth mode up to 30 cycles, giving a favorable tunability of coating construction and drug loading. The coating could also support sustained release of payloads and provide wild tissue response. With the systematic in vitro and in vivo study, such catechol-phenylboronic acid-enhanced LBL coating with drug loading would also address enhanced antiplatelet adhesion/activation and direct cell fate of endothelial cells and smooth muscle cells via tuning of coating cycles and loaded drugs. With modular assembly, such coating indicated potential for achieving enhanced re-endothelialization for vascular implants.

Nanocarriers and Their Loading Strategies

Nanocarriers are of paramount significance for drug delivery and nanomedicine technology. Given the imperfect systems and nonideal therapeutic effects, there are works to be done in synthesis as much as in biological studies, if not more so. Building the foundation of synthesis would offer more tools and deeper insights for exploring the biological systems with extreme complexity. This review aims at a broad-scope summary and classification of nanocarriers for drug delivery, with focus on the synthetic strategy and structural implications. The nanocarriers are divided into four categories according to the loading principle: molecular-level loading, surface loading, matrix loading, and cavity loading systems. Making comparisons across diverse nanocarrier systems would make it easier to see the fundamental characteristics, from where the weakness can be addressed and the strengths combined. The systematic comparisons may also inspire new ideas and methods.

Comparative validation of a microcapsule-based immunoassay for the detection of proteins and nucleic acids

To detect and study diseases, research and clinical laboratories must quantify specific biomarkers in the plasma and urine of patients with precision, sensitivity, and cost-effectiveness. Newly developed techniques, such as particle-based immunoassays, must be validated in these terms against standard methods such as enzyme-linked immunosorbent assays (ELISAs). Here, we compare the performance of assays that use hollow polyelectrolyte microcapsules with assays based on solid plastic beads, and with standard microplate immunoassays. The polyelectrolyte microcapsules detect the disease biomarker beta-2 microglobulin with a fifty-fold increase in sensitivity than polystyrene (PS) beads. For sequence-specific nucleic acid detection, the oligonucleotide-coated microcapsules exhibit a two-fold lower increase in sensitivity over PS beads. The microcapsules also detect the presence of a monoclonal antibody in hybridoma supernatant at a fifty-six-fold increase in sensitivity compared to a microplate assay. Overall, polyelectrolyte microcapsule-based assays are more sensitive for the detection of protein and nucleic acid analytes than PS beads and microplate assays, and they are viable alternatives as a platform for the rapid quantitative detection of analytes at very low concentrations.

Polyelectrolyte capsules preloaded with interconnected alginate matrix: An effective capsule system for encapsulation and release of macromolecules

In recent years, the design of stimuli-responsive hollow polymeric capsules is of tremendous interest for the scientific community because of the broad application of these capsules in the biomedical field. The use of weak polyelectrolytes as layer components for capsule fabrication is especially interesting as it results in hollow capsules that show unique release characteristics under physiological conditions. In this work, a methodology to prepare sub-micron sized alginate doped calcium carbonate (CaCO₃) particles through controlled precipitation in the presence of alginate is reported. Hollow capsules obtained by Layer-by-Layer (LbL) assembly of poly(allylamine hydrochloride) (PAH) and poly(methacrylic acid) (PMA) are showing an interconnected alginate matrix in the interior of the capsules. Investigations showed that the presence of alginate matrix enhances the encapsulation of cationic molecules (e.g. doxorubicin hydrochloride) manifold by charge controlled attraction mechanism. Capsule permeability investigated by confocal laser scanning microscopy revealed that the transformation from an open state to closed state is accompanied by an intermediate state where capsules are neither open nor closed. Furthermore, time dependent study indicated that the encapsulation process is linear as a function of time. The cell viability experiments demonstrated excellent biocompatibility of hollow capsules with mouse embryonic fibroblast cells. Anticancer investigations showed that DOX loaded capsules have significant anti-proliferative characteristics against HeLa cells. Such capsules have high potential for use as drug carrier for cationic drugs in cancer therapy.

From polyelectrolyte complexes to polyelectrolyte multilayers: Electrostatic assembly, nanostructure, dynamics, and functional properties

Polyelectrolyte complexes (PECs) are three-dimensional macromolecular structures formed by association of oppositely charged polyelectrolytes in solution. Polyelectrolyte multilayers (PEMs) can be considered a special case of PECs prepared by layer-by-layer (LbL) assembly that involves sequential deposition of molecular-thick polyelectrolyte layers with nanoscale control over the size, shape, composition and internal organization. Although many functional PEMs with novel physical and chemical characteristics have been developed, the current practical applications of PEMs are limited to those that require only a few bilayers and are relatively easy to prepare. The viability of such engineered materials can be realized only after overcoming the scientific and engineering challenges of understanding the kinetics and transport phenomena involved in the multilayer growth and the factors governing their final structure, composition, and response to external stimuli. There is a great need to model PEMs and to connect PEM behavior with the characteristics of the PEC counterparts to allow for prediction of performance and better design of multilayered materials. This review focuses on the relationship between PEMs and PECs. The constitutive interactions, the thermodynamics and kinetics of polyelectrolyte complexation and PEM formation, PEC phase behavior, PEM growth, the internal structure and stability in PEMs and PECs, and their response to external stimuli are presented. Knowledge of such interactions and behavior can guide rapid fabrication of PEMs and can aid their applications as nanocomposites, coatings, nano-sized reactors, capsules, drug delivery systems, and in electrochemical and sensing devices. The challenges and opportunities in future research directions are also discussed.

Biomimetic Extracellular Environment Based on Natural Origin Polyelectrolyte Multilayers

Surface modification of biomaterials is a well-known approach to enable an adequate biointerface between the implant and the surrounding tissue, dictating the initial acceptance or rejection of the implantable device. Since its discovery in early 1990s layer-by-layer (LbL) approaches have become a popular and attractive technique to functionalize the biomaterials surface and also engineering various types of objects such as capsules, hollow tubes, and freestanding membranes in a controllable and versatile manner. Such versatility enables the incorporation of different nanostructured building blocks, including natural biopolymers, which appear as promising biomimetic multilayered systems due to their similarity to human tissues. In this review, the potential of natural origin polymer-based multilayers is highlighted in hopes of a better understanding of the mechanisms behind its use as building blocks of LbL assembly. A deep overview on the recent progresses achieved in the design, fabrication, and applications of natural origin multilayered films is provided. Such films may lead to novel biomimetic approaches for various biomedical applications, such as tissue engineering, regenerative medicine, implantable devices, cell-based biosensors, diagnostic systems, and basic cell biology.

Label-Free Ultrasensitive Memristive Aptasensor

We present the very first worldwide ever-reported electrochemical biosensor based on a memristive effect and DNA aptamers. This novel device is developed to propose a completely new approach in cancer diagnostics. In this study, an affinity-based technique is presented for the detection of the prostate specific antigen (PSA) using DNA aptamers. The hysteretic properties of memristive silicon nanowires functionalized with these DNA aptamers provide a label-free and ultrasensitive biodetection technique. The ultrasensitive detection is hereby demonstrated for PSA with a limit of detection down to 23 aM, best ever published value for electrochemical biosensors in PSA detection. The effect of polyelectrolytes on our memristive devices is also reported to further show how positive or negative charges affect the memristive hysteresis. With such an approach, combining memristive nanowires and aptamers, memristive aptamer-based biosensors can be proposed to detect a wide range of cancer markers with unprecedent ultrasensitivities to also address the issue of an early detection of cancer.

pH-Induced Softening of Polyelectrolyte Microcapsules without Apparent Swelling

Polyelectrolyte microcapsules represent a versatile platform to encapsulate and release active ingredients. Understanding the effect of environmental conditions on the mechanical properties of microcapsules is critically important for enabling their applications under various settings. In this report, we investigate the effect of solution pH on the mechanical properties of polyelectrolyte microcapsules made of two weak polyelectrolytes (poly(acrylic acid) and branched poly(ethylenimine)), formed via recently introduced nanoscale interfacial complexation in emulsion (NICE). Interestingly, the stiffness of the NICE microcapsule shell is reduced significantly (by 2 orders of magnitude) when the solution pH is raised from 2 to 6 even though there is little change in the size of microcapsules. These seemingly counterintuitive results suggest that the molecular structure of NICE microcapsules may be different from those of conventional polyelectrolyte microcapsules. The possibility of tuning the shell stiffness without inducing significant changes in the microcapsule size could offer unique advantages in practical applications.

One-Step Generation of Multifunctional Polyelectrolyte Microcapsules via Nanoscale Interfacial Complexation in Emulsion (NICE)

Polyelectrolyte microcapsules represent versatile stimuli-responsive structures that enable the encapsulation, protection, and release of active agents. Their conventional preparation methods, however, tend to be time-consuming, yield low encapsulation efficiency, and seldom allow for the dual incorporation of hydrophilic and hydrophobic materials, limiting their widespread utilization. In this work, we present a method to fabricate stimuli-responsive polyelectrolyte microcapsules in one step based on nanoscale interfacial complexation in emulsions (NICE) followed by spontaneous droplet hatching. NICE microcapsules can incorporate both hydrophilic and hydrophobic materials and also can be induced to trigger the release of encapsulated materials by changes in the solution pH or ionic strength. We also show that NICE microcapsules can be functionalized with nanomaterials to exhibit useful functionality, such as response to a magnetic field and disassembly in response to light. NICE represents a potentially transformative method to prepare multifunctional nanoengineered polyelectrolyte microcapsules for various applications such as drug delivery and cell mimicry.

Small Wonders-The Use of Nanoparticles for Delivering Antigen

Despite the discovery of many potential antigens for subunit vaccines, universal protection is often lacking due to the limitations of conventional delivery methods. Subunit vaccines primarily induce antibody-mediated humoral responses, whereas potent antigen-specific cellular responses are required for prevention against some pathogenic infections. Nanoparticles have been utilised in nanomedicine and are promising candidates for vaccine or drug delivery. Nanoparticle vehicles have been demonstrated to be efficiently taken up by dendritic cells and induce humoral and cellular responses. This review provides an overview of nanoparticle vaccine development; in particular, the preparation of nanoparticles using a templating technique is highlighted, which would alleviate some of the disadvantages of existing nanoparticles. We will also explore the cellular fate of nanoparticle vaccines. Nanoparticle-based antigen delivery systems have the potential to develop new generation vaccines against currently unpreventable infectious diseases.

Preparation of novel porphyrin nanomaterials based on the pH-responsive shape evolution of porphyrin microspheres

The shapes and properties of self-assembled materials can be adjusted easily using environmental stimuli. Yet, the stimulus-triggered shape evolution of organic microspheres in aqueous solution has rarely been reported so far. Here, a novel type of poly(allylamine hydrochloride)-g-porphyrin microspheres (PAH-g-Por MPs) was prepared by a Schiff base reaction between 2-formyl-5,10,15,20-tetraphenylporphyrin (Por-CHO) and PAH doped in 3.5-μm CaCO3 microparticles, followed by template removal. The PAH-g-Por MPs had an average diameter of 2.5 μm and could be transformed into one-dimensional nanorods (NRs) and wormlike nanostructures (WSs) after being incubated for different times in pH 1-4 HCl solutions. The rate and degree of hydrolysis had a significant effect on the formation and morphologies of the nanorods. The NRs@pH1, NRs@pH2, and NRs@pH3 were all composed of the released Por-CHO and the unhydrolyzed PAH-g-Por because of the incomplete hydrolysis of the Schiff base. However, the WSs@pH4 were formed by a pure physical shape transformation, because they had the same composition as the PAH-g-Por MPs and the Schiff base bonds were not hydrolyzed. The self-assembled NRs and WSs exhibited good colloidal stability and could emit stable red fluorescence over a relatively long period of time.

Self-defensive layer-by-layer films with bacteria-triggered antibiotic release

We report on highly efficient, bioresponsive, controlled-release antibacterial coatings constructed by direct assembly of tannic acid (TA) with one of several cationic antibiotics (tobromycin, gentamicin, and polymyxin B) using the layer-by-layer (LbL) technique. These films exhibit a distinct “self-defense” behavior triggered by acidification of the immediate environment by pathogenic bacteria, such as Staphylococcus epidermidis (S. epidermidis) or Escherichia coli (E. coli). Films assembled using spin-assisted and dip-assisted techniques show drastically different morphology, thickness and pH-/bacteria-triggered antibiotic release characteristics. While dip-deposited films have rough surfaces with island-like, granular structures regardless of the film thickness, spin-assisted LbL assemblies demonstrate a transition from linear deposition of uniform 2D films to a highly developed 3D morphology for films thicker than ∼45 nm. Ellipsometry, UV–vis and mass spectrometry confirm that all coatings do not release antibiotics in phosphate buffered saline at pH 7.4 for as long as one month in the absence of bacteria and therefore do not contribute to the development of antibiotic resistance. These films do, however, release antibiotics upon pH lowering. The rate of triggered release can be controlled through the choice of assembled antibiotic and the assembly technique (spin- vs dip-deposition) and by the spinning rate used during deposition, which all affect the strength of TA–antibiotic binding. TA/antibiotic coatings as thin as 40 nm strongly inhibit S. epidermidis and E. coli bacterial growth both at surfaces and in surrounding medium, but support adhesion and proliferation of murine osteoblast cells. These coatings thus present a promising way to incorporate antibacterial agents at surfaces to prevent bacterial colonization of implanted biomedical devices.

Biological applications of LbL multilayer capsules: from drug delivery to sensing

Polyelectrolyte multilayer (PEM) capsules engineered with active elements for targeting, labeling, sensing and delivery hold great promise for the controlled delivery of drugs and the development of new sensing platforms. PEM capsules composed of biodegradable polyelectrolytes are fabricated for intracellular delivery of encapsulated cargo (for example peptides, enzymes, DNA, and drugs) through gradual biodegradation of the shell components. PEM capsules with shells responsive to environmental or physical stimuli are exploited to control drug release. In the presence of appropriate triggers (e.g., pH variation or light irradiation) the pores of the multilayer shell are unlocked, leading to the controlled release of encapsulated cargos. By loading sensing elements in the capsules interior, PEM capsules sensitive to biological analytes, such as ions and metabolites, are assembled and used to detect analyte concentration changes in the surrounding environment. This Review aims to evaluate the current state of PEM capsules for drug delivery and sensing applications.

UV light stimulated encapsulation and release by polyelectrolyte microcapsules

Layer-by-layer assembled polyelectrolyte capsules with well-controlled architectures and great versatility have been the subject of great interest, due to their unique advantages and tremendous potentials of being excellent candidates in multidisciplinary fields. UV light responsive microcapsules, as one class of the stimuli responsive capsules, possess the abilities to active their functionalities by responding to the UV stimulus remotely without requirement of direct contact or interaction. Therefore, any advances in this field will be of great value for the establishment of approaches to fabricate UV responsive polyelectrolyte capsules for desired uses. This review presents current development of UV responsive capsules, with emphasis on the underlying design strategies and their potential applications as delivery vesicles. In particular, UV-stimulated capsule functionalities, such as cargo encapsulation, release and combined multifunctionalities by the multilayers, have been addressed.

Emerging methods for the fabrication of polymer capsules

Hollow polymer capsules are attracting increasing research interest due to their potential application as drug delivery vectors, sensors, biomimetic nano- or multi-compartment reactors and catalysts. Thus, significant effort has been directed toward tuning their size, composition, morphology, and functionality to further their application. In this review, we provide an overview of emerging techniques for the fabrication of polymer capsules, encompassing: self-assembly, layer-by-layer assembly, single-step polymer adsorption, bio-inspired assembly, surface polymerization, and ultrasound assembly. These techniques can be applied to prepare polymer capsules with diverse functionality and physicochemical properties, which may fulfill specific requirements in various areas. In addition, we critically evaluate the challenges associated with the application of polymer capsules in drug delivery systems.