Amphiphilic Diblock Copolymer with Dithienylethene Pendants: Synthesis and Photo-Modulated Self-Assembly

Light-controlled self-assembly of a dithienylethene bolaamphiphile in water

In this work, we report the light-driven self-assembly of photochromic dithienylethene bolaamphiphiles in aqueous media. The open → closed transition that occurred upon irradiation was accompanied by the formation of 1D nanofibers.

Light-Triggered Reversible Slimming of Azobenzene-Containing Wormlike Nanoparticles Synthesized by Polymerization-Induced Self-Assembly for Nanofiltration Switches

Photoresponsive wormlike block copolymer nanoparticles (NPs) have potential applications in versatile fields, but their preparation suffers from narrow worm phase region and tedious approaches. In this work, azobenzene-containing wormlike NPs based on poly(methylacrylic acid)-b-poly(4-((4-butylphenyl)diazenyl)phenyl methacrylate) are prepared via polymerization-induced self-assembly at high solids concentration in ethanol. The pure wormlike NPs occupy a remarkably broad region in the morphological phase diagram because of the rigid nature of the core-forming block. These wormlike NPs expand resulting from trans-cis transformation upon UV irradiation, and slim near to the original state via visible light irradiation. The diameter and its variation amplitude of worms increase with the chain length of core-forming block. Moreover, a nanofiltration switch for rhodamine B is assembled to illustrate one of its potential applications by remote trigger using light.

The effect of low- and high-penetration light on localized cancer therapy

The design of a delivery system allowing targeted and controlled drug release has been considered one of the main strategies used to provide individualized cancer therapy, to improve survival statistics, and to enhance quality-of-life. External stimuli including low- and high-penetration light have been shown to have the ability to turn drug delivery on and off in a non-invasive remotely-controlled fashion. The success of this approach has been closely related to the development of a variety of drug delivery systems - from photosensitive liposomes to gold nanocages - and relies on multiple mechanisms of drug release activation. In this review, we make reference to the two extremes of the light spectrum and their potential as triggers for the delivery of antitumor drugs, along with the most recent achievements in preclinical trials and the challenges to an efficient translation of this technology to the clinical setting.

Adaptive soft molecular self-assemblies

Adaptive molecular self-assemblies provide possibility of constructing smart and functional materials in a non-covalent bottom-up manner. Exploiting the intrinsic properties of responsiveness of non-covalent interactions, a great number of fancy self-assemblies have been achieved. In this review, we try to highlight the recent advances in this field. The following contents are focused: (1) environmental adaptiveness, including smart self-assemblies adaptive to pH, temperature, pressure, and moisture; (2) special chemical adaptiveness, including nanostructures adaptive to important chemicals, such as enzymes, CO2, metal ions, redox agents, explosives, biomolecules; (3) field adaptiveness, including self-assembled materials that are capable of adapting to external fields such as magnetic field, electric field, light irradiation, and shear forces.

Photoswitchable aggregation-induced emission polymer containing dithienylethene and tetraphenylethene moieties

Upon irradiation with UV and visible light, the fluorescence of the prepared AIE polymer could be photoswitched.

Light-triggered “on–off” switching of fluorescence based on a naphthopyran-containing compound polymer micelle

We report a compound micelle based on a naphthopyran-containing copolymer and a fluorophore-containing copolymer for light-triggered “on–off” switching of fluorescence.

Photoresponsive assemblies of linear-dendritic copolymers containing azobenzene in the dendron interior: the effect of the dendron structure on dye encapsulation and release

Linear-dendritic copolymers show differential dye encapsulation and photoinduced dye release based on the number and positions of azobenzenes in the dendritic backbone as well as substituents on the dendron periphery.

Fast Photoinduced Large Deformation of Colloidal Spheres from a Novel 4-arm Azobenzene Compound

A novel 4-arm shaped amphiphilic azobenzene compound was synthesized. The tetraphenylethylene (TPE) core precursor was prepared and further modified by azo coupling reaction at the four peripheral groups. Colloidal spheres could be directly prepared by self-assembly of the prepared amphiphilic azobenzene compound in selective solvents (THF/H2O), which were characterized by using transmission electron microscopy. The colloid diameters could be controlled by adjusting the initial compound concentration and water-adding rate in the preparation processes. By irradiation with visible linearly polarized LED light (450 nm), fast photoinduced deformation of the colloidal spheres along the polarization direction was observed. A very large deformation degree (l/d > 4) could be easily obtained.

Ultraviolet light-mediated drug delivery: Principles, applications, and challenges

UV light has been extensively employed in drug delivery because of its versatility, ease of manipulation, and ability to induce chemical changes on the therapeutic carrier. Here we review the mechanisms by which UV light affects drug delivery systems. We will present the challenges facing UV-induced drug delivery and some of the proposed solutions.

Concentration-dependent and light-responsive self-assembly of bolaamphiphiles bearing α-cyanostilbene based photochromophore

In this paper, a new bolaamphiphile bearing 1-cyano-1,2-bis(phenyl)ethene (CNBE) has been synthesized. The self-assembly of this molecule in aqueous solution is concentration-dependent. Two distinct morphologies, monomolecular layered lamellas and helical nanofibres have been obtained with the as-prepared molecular configuration. Note worthily, the helical nanofibres provide an experimental evidence for the pure twisted structure in the liquid crystals, which is theoretically proposed by De Gennes. Due to the photoisomerization of CNBE, the self-assembled nanostructures undergo morphological changes upon irradiation. Although various nanostructures were observed in the solution-state, only nanofibres were obtained after the solution was cast on a substrate, which was attributed to a strong dewetting effect. This work illustrates concentration-dependent and light-responsive self-assembly and provides a novel avenue for fabricating smart soft materials.

Synthesis of Y-shaped amphiphilic copolymers by macromolecular azo coupling reaction

The synthesis of well-defined AB₂ Y-shaped amphiphilic block copolymers by macromolecular azo coupling reaction is reported.

[Stimuli-sensitive polymer systems]

The polymers can be found in different forms in solution (particles, capsules, pseudo-micelles, hydrogels…) or on surface with important prospects in many field applications. These polymer systems are particularly very good candidates to entrap, transport and deliver an active substance in biomedical applications however with many limitations on control of release of a given target. The stimuli-sensitive polymers, also called smart or environmentally sensitive polymers, present physical or chemical changes under the action of small variations of an external stimulus. This signal acts as a stimulus which causes the change of conformation and/or solvation of the macromolecular chains by modifying their various interactions. The stimuli are classified into two broad categories: physical or external stimuli: temperature, mechanical stress, light, magnetic and electric fields; chemical and biochemical or internal stimuli: pH, ionic strength, chemical molecule (glucose, redox) or biochemical (enzymes, antigens…). The use of stimuli-sensitive pathway is widely used in the literature to enhance or trigger the release of an active compound. In this paper, we present the different stimuli addressing the theoretical aspects, polymers corresponding to these stimuli. Some examples illustrate these systems for the controlled release of active compounds.

Multifunctional polymeric micelles for delivery of drugs and siRNA

Polymeric micelles, self-assembling nano-constructs of amphiphilic copolymers with a core-shell structure have been used as versatile carriers for delivery of drugs as well as nucleic acids. They have gained immense popularity owing to a host of favorable properties including their capacity to effectively solubilize a variety of poorly soluble pharmaceutical agents, biocompatibility, longevity, high stability in vitro and in vivo and the ability to accumulate in pathological areas with compromised vasculature. Moreover, additional functions can be imparted to these micelles by engineering their surface with various ligands and cell-penetrating moieties to allow for specific targeting and intracellular accumulation, respectively, to load them with contrast agents to confer imaging capabilities, and incorporating stimuli-sensitive groups that allow drug release in response to small changes in the environment. Recently, there has been an increasing trend toward designing polymeric micelles which integrate a number of the above functions into a single carrier to give rise to “smart,” multifunctional polymeric micelles. Such multifunctional micelles can be envisaged as key to improving the efficacy of current treatments which have seen a steady increase not only in hydrophobic small molecules, but also in biologics including therapeutic genes, antibodies and small interfering RNA (siRNA). The purpose of this review is to highlight recent advances in the development of multifunctional polymeric micelles specifically for delivery of drugs and siRNA. In spite of the tremendous potential of siRNA, its translation into clinics has been a significant challenge because of physiological barriers to its effective delivery and the lack of safe, effective and clinically suitable vehicles. To that end, we also discuss the potential and suitability of multifunctional polymeric micelles, including lipid-based micelles, as promising vehicles for both siRNA and drugs.

Light-controlled formation of vesicles and supramolecular organogels by a cholesterol-bearing amphiphilic molecular switch

A new responsive material composed of an amphiphilic light-switchable dithienylethene unit functionalized with a hydrophobic cholesterol unit and a hydrophilic poly(ethylene glycol)-modified pyridinium group has been designed. This unique single-molecule system shows responsive light-switchable self-assembly in both water and organic solvents. Light-triggered reversible vesicle formation in aqueous solutions is reported. The molecule shows a different behavior in apolar aromatic solvents, in which light-controlled formation of organogel fibers is observed. The light-triggered aggregation behavior of this molecule demonstrates that control of a supramolecular structure with light can be achieved in both aqueous and organic media and that this ability can be present in a single molecule. This opens the way toward the effective development of new strategies in soft nanotechnology for applications in controlled chemical release systems.

Role of integrated cancer nanomedicine in overcoming drug resistance

Cancer remains a major killer of mankind. Failure of conventional chemotherapy has resulted in recurrence and development of virulent multi drug resistant (MDR) phenotypes adding to the complexity and diversity of this deadly disease. Apart from displaying classical physiological abnormalities and aberrant blood flow behavior, MDR cancers exhibit several distinctive features such as higher apoptotic threshold, aerobic glycolysis, regions of hypoxia, and elevated activity of drug-efflux transporters. MDR transporters play a pivotal role in protecting the cancer stem cells (CSCs) from chemotherapy. It is speculated that CSCs are instrumental in reviving tumors after the chemo and radiotherapy. In this regard, multifunctional nanoparticles that can integrate various key components such as drugs, genes, imaging agents and targeting ligands using unique delivery platforms would be more efficient in treating MDR cancers. This review presents some of the important principles involved in development of MDR and novel methods of treating cancers using multifunctional-targeted nanoparticles. Illustrative examples of nanoparticles engineered for drug/gene combination delivery and stimuli responsive nanoparticle systems for cancer therapy are also discussed.

Shedding light on nanomedicine

Light is an electromagnetic radiation that can convert its energy into different forms (e.g., heat, chemical energy, and acoustic waves). This property has been exploited in phototherapy (e.g., photothermal therapy and photodynamic therapy (PDT)) and optical imaging (e.g., fluorescence imaging) for therapeutic and diagnostic purposes. Light-controlled therapies can provide minimally- or noninvasive spatiotemporal control as well as deep tissue penetration. Nanotechnology provides numerous advantages, including selective targeting of tissues, prolongation of therapeutic effect, protection of active payloads, and improved therapeutic indices. This review explores the advances that nanotechnology can bring to light-based therapies and diagnostics, and vice versa, including photo-triggered systems, nanoparticles containing photoactive molecules, and nanoparticles that are themselves photoactive. Limitations of light-based therapies such as photic injury and phototoxicity are discussed.

Block copolymer micelles with a dual-stimuli-responsive core for fast or slow degradation

We report the design and demonstration of a dual-stimuli-responsive block copolymer (BCP) micelle with increased complexity and control. We have synthesized and studied a new amphiphilic ABA-type triblock copolymer whose hydrophobic middle block contains two types of stimuli-sensitive functionalities regularly and repeatedly positioned in the main chain. Using a two-step click chemistry approach, disulfide and o-nitrobenzyle methyl ester groups are inserted into the main chain, which react to reducing agents and light, respectively. With the end blocks being poly(ethylene oxide), micelles formed by this BCP possess a core that can be disintegrated either rapidly via photocleavage of o-nitrobenzyl methyl esters or slowly through cleavage of disulfide groups by a reducing agent in the micellar solution. This feature makes possible either burst release of an encapsulated hydrophobic species from disintegrated micelles by UV light, or slow release by the action of a reducing agent, or release with combined fast-slow rate profiles using the two stimuli.