Morphology control in biphasic hybrid systems of semiconducting materials

Quantum Dot Transfer from the Organic Phase to Acrylic Monomers for the Controlled Integration of Single-Photon Sources by Photopolymerization

This paper reports on a new strategy for obtaining homogeneous dispersion of grafted quantum dots (QDs) in a photopolymer matrix and their use for the integration of single-photon sources by two-photon polymerization (TPP) with nanoscale precision. The method is based on phase transfer of QDs from organic solvents to an acrylic matrix. The detailed protocol is described, and the corresponding mechanism is investigated and revealed. The phase transfer is done by ligand exchange through the introduction of mono-2-(methacryloyloxy) ethyl succinate (MES) that replaces oleic acid (OA). Infrared (IR) measurements show the replacement of OA on the QD surface by MES after ligand exchange. This allows QDs to move from the hexane phase to the pentaerythritol triacrylate (PETA) phase. The QDs that are homogeneously dispersed in the photopolymer without any clusterization do not show any significant broadening in their photoluminescence spectra even after more than 3 years. The ability of the hybrid photopolymer to create micro- and nanostructures by two-photon polymerization is demonstrated. The homogeneity of emission from 2D and 3D microstructures is confirmed by confocal photoluminescence microscopy. The fabrication and integration of a single-photon source in a spatially controlled manner by TPP is achieved and confirmed by auto-correlation measurements.

Singlet Fission Materials for Photovoltaics: from Small Molecules to Macromolecules

Singlet fission (SF) is a spin-allowed process in which a singlet state splits into two triplet states. Materials that enable SF have attracted great attention in the last decade, mainly stemming from the potential of overcoming the Shockley-Queisser (SQ) limit in photoenergy conversion. In the past decade, a large number of new molecules exhibiting SF have been explored and many devices based on SF materials have been studied, though the mechanistic understanding is still obscure. This review focuses on the recent developments of SF materials, including small molecules, oligomers and polymers. The molecular design strategies and related mechanisms of SF are discussed. Then the dynamics of charge transfer and energy transfer between SF materials and other materials are introduced. Further, we discuss the progresses of implementing SF in photovoltaics. It is hoped that a comprehensive understanding to the SF materials, devices and mechanism may pave a new way for the design of next generation photovoltaics. This article is protected by copyright. All rights reserved.

Short-range organization and photophysical properties of CdSe quantum dots coupled with aryleneethynylenes

Hybrid organic-inorganic nanomaterials composed of organic semiconductors and inorganic quantum dots (QDs) are promising candidates for opto-electronic devices in a sustainable internet of things. Especially their ability to combine the advantages of both compounds in one material with new functionality, the energy-efficient production possibility and the applicability in thin films with little resource consumption are key benefits of these materials. However, a major challenge one is facing for these hybrid materials is the lack of a detailed understanding of the organic-inorganic interface which hampers the widespread application in devices. We advance the understanding of this interface by studying the short-range organization and binding motif of aryleneethynylenes coupled to CdSe QDs as an example system with various experimental methods. Clear evidence for an incorporation of the organic ligands in between the inorganic QDs is found, and polarization-modulation infrared reflection-absorption spectroscopy is shown to be a powerful technique to directly detect the binding in such hybrid thin-film systems. A monodentate binding and a connection of neighboring QDs by the aryleneethynylene molecules is identified. Using steady-state and time resolved spectroscopy, we further investigated the photophysics of these hybrid systems. Different passivation capabilities resulting in different decay dynamics of the QDs turned out to be the main influence of the ligands on the photophysics.

Prospects of Coupled Organic-Inorganic Nanostructures for Charge and Energy Transfer Applications

We review the field of organic-inorganic nanocomposites with a focus on materials that exhibit a significant degree of electronic coupling across the hybrid interface. These nanocomposites undergo a variety of charge and energy transfer processes, enabling optoelectronic applications in devices which exploit singlet fission, triplet energy harvesting, photon upconversion or hot charge carrier transfer. We discuss the physical chemistry of the most common organic and inorganic components. Based on those we derive synthesis and assembly strategies and design criteria on material and device level with a focus on photovoltaics, spin memories or optical upconverters. We conclude that future research in the field should be directed towards an improved understanding of the binding motif and molecular orientation at the hybrid interface.

Polymer Coated Semiconducting Nanoparticles for Hybrid Materials

This paper reviews synthetic concepts for the functionalization of various inorganic nanoparticles with a shell consisting of organic polymers and possible applications of the resulting hybrid materials. A polymer coating can make inorganic nanoparticles soluble in many solvents as individual particles and not only do low molar mass solvents become suitable, but also polymers as a solid matrix. In the case of shape anisotropic particles (e.g., rods) a spontaneous self-organization (parallel orientation) of the nanoparticles can be achieved, because of the formation of lyotropic liquid crystalline phases. They offer the possibility to orient the shape of anisotropic nanoparticles macroscopically in external electric fields. At least, such hybrid materials allow semiconducting inorganic nanoparticles to be dispersed in functional polymer matrices, like films of semiconducting polymers. Thereby, the inorganic nanoparticles can be electrically connected and addressed by the polymer matrix. This allows LEDs to be prepared with highly fluorescent inorganic nanoparticles (quantum dots) as chromophores. Recent works have aimed to further improve these fascinating light emitting materials.

Bidirectional ROMP of paracylophane-1,9-dienes to tri- and penta-block p-phenylenevinylene copolymers

Dialkoxy and dialkyl substituted paracyclophane-1,9-dienes undergo bidirectional ring opening metathesis polymerisation (ROMP) on addition of bifunctional Hoveyda–Grubbs initiators.

Organic-to-aqueous phase transfer of Zn–Cu–In–Se/ZnS quantum dots with multifunctional multidentate polymer ligands for biomedical optical imaging

ZnCuInSe/ZnS QDs with widely tunable PL emissions were synthesized and water-solubilized with cRGD modified multifunctional multidentate polymer (cRGD-PME) for bioimaging.

Suppressing the Fluorescence Blinking of Single Quantum Dots Encased in N-type Semiconductor Nanoparticles

N-type semiconductor indium tin oxide (ITO) nanoparticles are used to effectively suppress the fluorescence blinking of single near-infrared-emitting CdSeTe/ZnS core/shell quantum dots (QDs), where the ITO could block the electron transfer from excited QDs to trap states and facilitate more rapid regeneration of neutral QDs by back electron transfer. The average blinking rate of QDs is significantly reduced by more than an order of magnitude and the largest proportion of on-state is 98%, while the lifetime is not considerably reduced. Furthermore, an external electron transfer model is proposed to analyze the possible effect of radiative, nonradiative, and electron transfer pathways on fluorescence blinking. Theoretical analysis based on the model combined with measured results gives a quantitative insight into the blinking mechanism.

Main-chain polyoxometalate-containing donor–acceptor conjugated copolymers: synthesis, characterization, morphological studies and applications in single-component photovoltaic cells

Single-component solar cells of main-chain polyoxometalate-containing donor–acceptor conjugated copolymers show efficiencies comparable to those conjugated polymers with covalently bonded fullerenes.

Side-chain conjugated polymers for use in the active layers of hybrid semiconducting polymer/quantum dot light emitting diodes

Three monomers,M1–M3, with modified carbazole cores and styrene functionality were polymerized by RAFT. The polymers were then used in the active layers of hybrid polymer/quantum dot light emitting diodes.