Recent Development of Durable and Self-Healing Surfaces with Special Wettability

Regenerative Superhydrophobic Coatings for Enhanced Performance and Durability of High-Voltage Electrical Insulators in Cold Climates

Superhydrophobic coatings can be a suitable solution for protecting vulnerable electrical infrastructures in regions with severe meteorological conditions. Regenerative superhydrophobicity, the ability to regain superhydrophobicity after being compromised or degraded, could address the issue of the low durability of these coatings. In this study, we fabricated a superhydrophobic coating comprising hydrophobic aerogel microparticles and polydimethylsiloxane (PDMS)-modified silica nanoparticles within a PDMS matrix containing trifluoropropyl POSS (F-POSS) and XIAMETER PMX-series silicone oil as superhydrophobicity-regenerating agents. The fabricated coating exhibited a static contact angle of 169.5° and a contact angle hysteresis of 6°. This coating was capable of regaining its superhydrophobicity after various pH immersion and plasma deterioration tests. The developed coating demonstrated ice adhesion as low as 71.2 kPa, which remained relatively unchanged even after several icing/de-icing cycles. Furthermore, the coating exhibited a higher flashover voltage than the reference samples and maintained a minimal drop in flashover voltage after consecutive testing cycles. Given this performance, this developed coating can be an ideal choice for enhancing the lifespan of electrical insulators.

Developing aerogel surfaces via switchable-hydrophilicity tertiary amidine coating for improved oil recovery

Blanket aerogels (i.e., Cabot™ Thermal Wrap® (TW) and Aspen™ Spaceloft® (SL)) with surfaces that have controllable wettability are promising advanced materials for oil recovery applications, where high oil uptake during deployment could be coupled with high oil release to enable reusability of recovered oil. The study presented here details the preparation of CO₂-switchable aerogel surfaces through the application of switchable tertiary amidine (i.e., tributylpentanamidine (TBPA)) onto aerogel surfaces using drop casting, dip coating, and physical vapor deposition techniques. TBPA is synthesized via two step processes: (1) synthesis of N, N-dibutylpentanamide, (2) synthesis of N, N-tributylpentanamidine. The deposition of TBPA is confirmed by X-ray photoelectron spectroscopy. Our experiments revealed that surface coating of TBPA onto aerogel blankets was partially successful within limited set of process conditions (e.g., 290 ppm CO₂ and 5500 ppm humidity for PVD, 106 ppm CO₂ and 700 ppm humidity for drop casting and dip coating), but that the post-aerogel modification strategies yielded poor, heterogeneous reproducibility. Overall, more than 40 samples were tested for their switchability in the presence of CO₂ and water vapor, respectively, and the success rate was 6.25 %, 11.7 % and 18 % for PVD, drop casting, and dip coating, respectively. The most likely reasons for unsuccessful coating onto aerogel surfaces are: (1) the heterogeneous fiber structure of the aerogel blankets, (2) poor distribution of the TBPA over the aerogel blanket surface.

Fluorine-Free, Highly Durable Waterproof and Breathable Fibrous Membrane with Self-Clean Performance

Lightweight, durable waterproof and breathable membranes with multifunctional properties that mimic nature have great potential for application in high-performance textiles, efficient filtering systems and flexible electronic devices. In this work, the fluoride-free triblock copolymer poly(styrene-b-butadiene-b-styrene) (SBS) fibrous membrane with excellent elastic performance was prepared using electrospinning. According to the bionics of lotus leaves, a coarse structure was built onto the surface of the SBS fiber using dip-coating of silicon dioxide nanoparticles (SiO₂ NPs). Polydopamine, an efficient interfacial adhesive, was introduced between the SBS fiber and SiO₂ NPs. The hydrophobicity of the modified nanofibrous membrane was highly improved, which exhibited a super-hydrophobic surface with a water contact angle large than 160°. The modified membrane retained super-hydrophobic properties after 50 stretching cycles under 100% strains. Compared with the SBS nanofibrous membrane, the hydrostatic pressure and WVT rate of the SBS/PDA/SiO₂ nanofibrous membrane improved simultaneously, which were 84.2 kPa and 6.4 kg·m^-2·d^-1 with increases of 34.7% and 56.1%, respectively. In addition, the SBS/PDA/SiO₂ nanofibrous membrane showed outstanding self-cleaning and windproof characteristics. The high-performance fibrous membrane provides a new solution for personal protective equipment.

Progress in Studies of Surface Nanotextures and Coatings with Nanomaterials on Glass for Anti-Dust Functionality

Dust pollution presents a wide range of adverse effects to product functionalities and the quality of human life. For instance, when dust particles deposit on solar photovoltaic panels, sunlight absorption is significantly reduced, and solar-to-electrical energy conversion yield may be lowered by 51%- Conventional (manual) dust removal methods are costly, consume significant material resources, and cause irreparable damage to the solar glass surface. Therefore, it is critical to develop glass surfaces that can clean themselves or are easily cleaned by natural forces. Many approaches have been attempted to reduce dust deposition, such as developing superhydrophobic surfaces and preparing anti-static surfaces. This paper reviews the recent progress in studies of anti-dust and cleaning mechanisms or methodologies, which include investigation into micro- and nano-sized dust properties, dust deposition processes and adhesion mechanisms to surfaces, and the state-of-the-art approaches to anti-dust and easy-cleaning functions that tailor surface micro-/nanotextures, lowering surface energy via nanocoatings, and enhancing anti-static properties with nanomaterials. We compare the advantages and disadvantages of various approaches and discuss the research prospects. We envision that future research will be focused on developing transparent surfaces with multiple dust-proof functions to cope with dust-burdening operating environments.

Fabrication of durable underoil superhydrophobic surfaces with self-cleaning and oil–water separation properties

In this study, a simple method without any additional chemical modification is proposed to fabricate underoil superhydrophobic surfaces with micro- and nano-hierarchical structures using a nanosecond laser system. The fabricated surfaces exhibited extreme superhydrophobicity and underoil superhydrophobicity with high contact angles of 153.8 ± 1.5° and 161.3 ± 1.1°, respectively. The results show that even after 20 abrasion cycles, the fabricated surfaces retained water repellency and self-cleaning performance under oil, while the superhydrophobicity in air was not resistant to wear. In addition, the fabricated brass meshes can also be used to separate oil in an oil–water mixture based on the prewetting induced underoil superhydrophobicity after being damaged. The separation efficiency was as high as 97.8%, which made them more appropriate for the oil–water separation than those based on superhydrophobicity. The proposed fabrication method is suitable for large-scale and mass production and provides a new avenue and possibility for further development of robust functional interface materials.

This paper provides a simple method for the fabrication of underoil superhydrophobic surfaces, which is expected to be useful in promoting functional interface materials to practical application.

The challenges, achievements and applications of submersible superhydrophobic materials

Superhydrophobic materials have been widely reported throughout the scientific literature. Their properties originate from a highly rough morphology and inherently water repellent surface chemistry. Despite promising an array of functionalities, these materials have seen limited commercial development. This could be attributed to many factors, like material compatibility, low physical resilience, scaling-up complications, etc. In applications where persistent water contact is required, another limitation arises as a major concern, which is the stability of the air layer trapped at the surface when submerged or impacted by water. This review is aimed at examining the diverse array of research focused on monitoring/improving air layer stability, and highlighting the most successful approaches. The reported complexity of monitoring and enhancing air layer stability, in conjunction with the variety of approaches adopted, results in an assortment of suggested routes to achieving success. The review is addressing the challenge of finding a balance between maximising water repulsion and incorporating structures that protect air pockets from removal, along with challenges related to the variant approaches to testing air-layer stability across the research field, and the gap between the achieved progress and the required performance in real-life applications.

Adhesion behaviors on four special wettable surfaces: natural sources, mechanisms, fabrications and applications

The study of adhesion behaviors on solid-liquid surfaces plays an important role in scientific research and development in various fields, such as medicine, biology and agriculture. The contact angle and sliding angle of the liquid on the solid surface are commonly used to characterize and measure the wettability of a particular surface. They have a wide range of values, which results in different wettability. It boils down to the adhesion of solid surfaces to liquids. This feature article is aimed at revealing the essence of the adhesion behavior from the aspects of controlling the chemical composition or changing the geometrical microstructure of the surface, and reviewing the natural sources, wetting models, preparation methods and applications of four kinds of typical solid-liquid surfaces (low-adhesion superhydrophobic surfaces, high-adhesion superhydrophobic surfaces, slippery liquid-infused porous surfaces (SLIPS) and hydrophilic/superhydrophilic surfaces). Last, a summary and outlook on this field are given to point out the current challenges and the potential research directions of surface adhesion in the coming future.

Design and Synthesis of Self-Healable Superhydrophobic Coatings for Oil/Water Separation

The introduction of the self-healing function into superhydrophobic surfaces has recently raised increasing attention because it can renew the feature of the surface iteratively to a large extent to extend the service life span of the surface in practical applications. However, it still faces a great challenge on how to achieve this unique surface with a tunable self-healing function via an easy and effective way. Here, we propose a general, yet easily implemented strategy to endow a diversity of commercial substrates with self-healable superhydrophobic surfaces mainly relying on the collective use of the polydopamine (PDA) chemistry with a hydrophobic silane-octadecyltrimethoxysilane (ODTMS). Upon applying ultrasonication for 30 min to an alkaline aqueous solution comprising dopamine hydrochloride (DA) and ODTMS, ODTMS disperses into the aqueous phase as microdroplets, while DA polymerizes into PDA exclusively onto the micro-sized oil droplets, forming capsules with nanoroughness. In the presence of substrates, PDA also anchors these composite capsules onto substrates, resulting in hierarchical surfaces. ODTMS is detected abundantly on the hierarchical surfaces, leading to superhydrophobic surfaces. Remarkably, this superhydrophobicity is self-restorable at room temperature (e.g., days) once it is deteriorated by the air plasma or extremely acid/alkali treatment, and this self-restoration can be significantly accelerated via the heating (2 h) or rubbing (5 min) treatment. Generally, heating and rubbing are the valid ways to induce self-healing, which is speculated to accelerate the migration of hidden ODTMS from the capsules to the surfaces because of the minimization of the global surface-free energy. Benefiting from the self-healing superhydrophobicity, we devise oil/water separation using various surface-modified commercial fabrics, which exhibit a prolonged life span in applications and may further facilitate other usage in environmental remediation and water purification.

Multi Self-Healable UV Shielding Polyurethane/CeO2 Protective Coating: The Effect of Low-Molecular-Weight Polyols

We prepared a series of polyurethane (PU) coatings with defined contents using poly(tetramethylene oxide)glycol (PTMG) with two different molecular weights (i.e., M_n = 2000 and 650), as well as polydimethyl siloxane (PDMS) with a molecular weight of M_n 550. For every coating, maximum adhesive strength and excellent self-healing character (three times) were found using 6.775 mol% mixed with low-molecular-weight-based polyols (PU-11-3-3). Defined 1.0 wt% CeO₂ was also used for the PU-11-3-3 coating (i.e., PU-11-3-3-CeO₂) to obtain UV shielding properties. Both the in situ polymerization and blending processes were separately applied during the preparation of the PU-11-3-3-CeO₂ coating dispersion. The in situ polymerization-based coating (i.e., PU-11-3-3-CeO₂-P) showed similar self-healing properties. The PU-11-3-3-CeO₂-P coating also showed excellent UV shielding in real outdoor exposure conditions.

Antiadhesive Properties of Oil-Infused Gels against the Universal Adhesiveness of Polydopamine

Polydopamine (PDA) is well-known as the first material-independent adhesive, which firmly attaches to various substances, even hydrophobic materials, through strong coordinative interactions between the phenolic hydroxyl groups of PDA and the substances. In contrast, oil-infused materials such as self-lubricating gels (SLUGs) exhibit excellent antiadhesive properties against viscous liquids, ice/snow, (bio)fouling, and so on. In this study, we simply questioned: "What will happen when these two materials with contrary nature meet"? To answer this, we formed a PDA layer on a SLUG surface that exhibits thermoresponsive syneretic properties (release of liquid from the gel matrix to the outer surface) and investigated its interfacial behavior. The oil layer caused by syneresis from the SLUGs at -20 °C was found to show resistance to adhesion of universally adhesive PDA.

One-step synthesis of core shell cellulose-silica/n-octadecane microcapsules and their application in waterborne self-healing multiple protective fabric coatings

Exploiting water-based fabric coatings outfitted with multiple protections (e.g., waterproofness, ultraviolet (UV) resistance and thermal insulation) are urgently demanded. Nevertheless, achieving the multifunction and durability poses the major challenge. In the present study, novel multifunctional cellulose/silica hybrid microcapsules were developed by one-step emulsion-solvent diffusion; these microcapsules were well dispersed into waterborne silicone resins to form waterborne multiple protective fabric coatings. Since the encapsulated phase change materials were in the core of capsules, and the hydrophobic coupling reagent and UV absorber were grafted onto the silicas in the shell of capsules, these fabric coatings exhibited high superhydrophobicity, UV protection and thermal insulation. Moreover, because hydrophobic coupling reagent and UV absorber in the shell-cellulose of capsules exhibited easy mobility, the fabric coatings displayed self-repairability of superhydrophobicity and UV protection even after being damaged chemically or mechanically. The fabric coating presented in this study could have a range of applications, covering special protective fabric, high-altitude garments as well as self-cleaning materials.

Multi-Functional Cardanol Triazine Schiff Base Polyimine Additives for Self-Healing and Super-Hydrophobic Epoxy of Steel Coating

The designing of multifunctional materials in system-level efficiency is one of the main targets and a hot topic for the application of novel green or bio-based materials and structures. In this work, the chemical structure of bio-based cardanol that was derived from cashew oil was modified through a reaction with a bishydrazino-s-triazine derivative followed by condensation polymerization or reaction with terephthaldehyde to obtain a Schiff base polymer. The chemical structures of the modified cardanol-bishydrazino-s-triazine-based monomer and the Schiff base polymer were confirmed from FTIR and NMR spectroscopy analyses. The modified cardanol bishydrazino-s-triazine monomer and polymer were added with different weight ratios during the curing of the epoxy/polyamine hardener to improve the thermal, mechanical, and anti-corrosion characteristics of the epoxy coating of a steel substrate. The data elucidated that the presence of a cardanol bishydrazino-s-triazine monomer and polymer improves the thermal, mechanical, adhesion, and anti-corrosion characteristics of epoxy coatings after exposure for more than 1500 h. The presence of a cardanol- bishydrazino-s-triazine polymer more than 3 wt.% during the curing of epoxy networks produces superhydrophobic and self-healing epoxy coatings. The modification of the epoxy coating with the cardanol bishydrazino-s-triazine polymer improves the seawater contact angle by more than 150° and the adhesion strength of the epoxy coating with the steel surface.

Constructing Mechanochemical Durable and Self-Healing Superhydrophobic Surfaces

Bioinspired superhydrophobic surfaces have attracted great interest due to their special functions and wide applications. However, it is still a big challenge to construct a durable superhydrophobic coating for large-scale applications due to its easy destruction by the mechanochemical attack. In this mini-review, we present the state-of-the-art developments in the rational design of mechanochemical durable and self-healing superhydrophobic surfaces. First, the mechanically durable superhydrophobic surfaces are constructed to endure mechanical damage by adjusting the surface morphology and increasing the binding force between the substrates and the modified materials. Second, chemical damages also have been taken into consideration to develop chemically robust superhydrophobic surfaces, such as chemical etching, ultraviolet (UV)-light irradiation, and bioerosion, etc. Third, endowing superhydrophobic coatings with self-healing function can effectively improve the durability and prolong the lifespan of the coatings by releasing low-surface-energy agents or regenerating topographic structures. Finally, the challenges and future perspectives in developing super durable bioinspired superhydrophobic surfaces by structure design and chemistry control are discussed. The innovative points provided in this mini-review will provide deep fundamental insight for prolonging the lifetime of the superhydrophobic surfaces and enable their practical applications in the near future.

Fast Healable Superhydrophobic Material

Self-healability is a crucial feature for developing artificial superhydrophobic surfaces. Although self-healing of microscopic defects has been reported, the restoration of severely damaged superhydrophobic surfaces remains a technological challenge. Here, we report a robust superhydrophobic surface possessing ultrafast recoverability after catastrophic damage. The surface is fabricated via integrating its hierarchical texture comprised of Super P (a conductive carbon black) and TiO₂ nanoparticles into a poly(dimethylsiloxane) network cross-linked by dynamic pyrogallol-Fe coordination. In the presence of an electrical trigger, the surface restores its macroscopic configuration, hierarchical texture, mechanical properties, and wettability within 1 min after being cut or plasma etching. The restoration is attributed to the reconstruction of the multiscale structures through dynamic coordination. Application of the self-healable surface is demonstrated by a fast de-icing process. The present investigation offers a novel insight into the durability and reliability of artificial superhydrophobic surfaces against catastrophic damage, which has potential application in the fields including self-cleaning, anti-icing, advanced electronics, and so on.

A scalable, self-healing and hot liquid repelling superamphiphobic spray coating with remarkable mechanochemical robustness for real-life applications

A simultaneous demonstration of scalability, mechanochemical robustness, self-healing and hot liquid repelling features is still a major challenge in fabricating superamphiphobic coatings. In this work, we developed a facile and effective silica-inorganic adhesive-based spray coating for the preparation of self-healing and hot liquid repelling superamphiphobic coatings that demonstrate good mechanical durability (under repeated adhesive tape-peeling tests, ultrasonic treatment, sandpaper abrasion and sand flow impact tests) and superstrong chemical robustness when exposed to highly corrosive media, such as 98% sulfuric acid and 5% chromic acid, for a long time. In addition, our superamphiphobic paints can be coated on large-sized substrates to create large robust coatings for real-world applications, which are still regarded as the tightest bottlenecks in the development of superamphiphobic materials. The large coatings also showed excellent liquid repellence when placed for a long time in the outdoor environment, and upon repeatable quartz sand abrasion and treading stepping test cycles. Moreover, the anti-smudge ability, semitransparency, repeated self-healing ability, self-cleaning behaviour both in air and oil, and hot liquid repelling behavior of the resultant coatings are also investigated. Taking multifaceted stability and scalability into consideration, our described coatings are promising for more vital applications such as windows, infrastructures, crude oil pipelines, in harsh chemical engineering, etc.

Development of Durable, Fluorine-free, and Transparent Superhydrophobic Surfaces for Oil/Water Separation

Although artificial superhydrophobic materials have extensive and significant applications in antifouling, self-cleaning, anti-icing, fluid transport, oil/water separation, and so forth, the poor robustness of these surfaces has always been a bottleneck for their development in practical industrial applications. Here, we report a facile, economical, efficient, and versatile strategy to prepare environmentally friendly, mechanically robust, and transparent superhydrophobic surfaces by combining adhesive and hydrophobic paint, which is applicable for both hard and soft substrates. The coated substrates exhibit excellent superhydrophobic property and ultralow adhesion with water (contact angle ≈ 160° and sliding angle <2°). Additionally, the coated surface maintained its superhydrophobicity even after 325 sandpaper abrasion cycles, showing remarkable mechanical robustness. Furthermore, the coated surfaces were applied to separate oil/water mixtures because of their unique characteristics of being simultaneously superhydrophobic and superoleophilic. In addition, it is believed that this fabrication method is significant, promising, and feasible for mass production of superhydrophobic surfaces for industrial applications.

Biomimetic Self-Cleaning Anisotropic Solid Slippery Surface with Excellent Stability and Restoration

Anisotropic slippery surfaces are widely used in anti-fouling, smart control of liquid movement and directional liquid transportation. However, anisotropic slippery liquid-infused porous surfaces (SLIPS) cannot meet the need of practical applications owing to loss and contamination of liquid lubricants. Inspired by solid epicuticular wax on the surface of land plant leaves, we herein report a type of biomimetic anisotropic solid slippery surface (ASSS) based on paraffin wax-incorporated paper with directional micro-grooves. This ASSS material shows anisotropic sliding behavior for liquid droplets with different surface tensions. It is demonstrated to be of excellent stability compared with SLIPS as the solid lubricant cannot be lost and stain the contacting surfaces. It also exhibits outstanding acid and alkali corrosion resistance and restoration capability upon physical damage. Both hydrophilic and hydrophobic contaminants on our ASSS can be self-cleaned by using only water droplets. Our ASSS extends the fabrication of new slippery materials and overcomes some drawbacks of SLIPS.

Waterproof and Breathable Electrospun Nanofibrous Membranes

Waterproof and breathable (W&B) membranes combine fascinating properties of resistance to liquid water penetration and transmitting of water vapor, playing a key role in addressing problems related to health, resources, and energy. Electrospinning is an efficient and advanced way to construct nanofibrous materials with easily tailored wettability and adjustable pore structure, therefore providing an ideal strategy for constructing W&B membranes. In this review, recent progress on electrospun W&B membranes is summarized, involving materials design and fabrication, basic properties of electrospun W&B membranes associated with waterproofness and breathability, as well as their applications. In addition, challenges and future trends of electrospun W&B membranes are discussed.

A review on wetting and water condensation - Perspectives for CO2 condensation

Liquefaction of vapor is a necessary, but energy intensive step in several important process industries. This review identifies possible materials and surface structures for promoting dropwise condensation, known to increase efficiency of condensation heat transfer. Research on superhydrophobic and superomniphobic surfaces promoting dropwise condensation constitutes the basis of the review. In extension of this, knowledge is extrapolated to condensation of CO₂. Global emissions of CO₂ need to be minimized in order to reduce global warming, and liquefaction of CO₂ is a necessary step in some carbon capture, transport and storage (CCS) technologies. The review is divided into three main parts: 1) An overview of recent research on superhydrophobicity and promotion of dropwise condensation of water, 2) An overview of recent research on superomniphobicity and dropwise condensation of low surface tension substances, and 3) Suggested materials and surface structures for dropwise CO₂ condensation based on the two first parts.

Rationally Designed, Multifunctional Self-Assembled Nanoparticles for Covalently Networked, Flexible and Self-Healable Superhydrophobic Composite Films

For constructing bioinspired functional films with various superhydrophobic functions, including self-cleaning, anticorrosion, antibioadhesion, and oil-water separation, hydrophobic nanomaterials have been widely used as crucial structural components. In general, hydrophobic nanomaterials, however, cannot form strong chemical bond networks in organic-inorganic hybrid composite films because of the absence of chemically compatible binding components. Herein, we report the rationally designed, multifunctional self-assembled nanoparticles with tunable functionalities of covalent cross-linking and hydrophobicity for constructing three-dimensionally interconnected superhydrophobic composite films via a facile solution-based fabrication at room temperature. The multifunctional self-assembled nanoparticles allow the systematic control of functionalities of composite films, as well as the stable formation of covalently linked superhydrophobic composite films with excellent flexibility (bending radii of 6.5 and 3.0 mm, 1000 cycles) and self-healing ability (water contact angle > 150°, ≥10 cycles). The presented strategy can be a versatile and effective route to generating other advanced functional films with covalently interconnected composite networks.

Dual water-healable zwitterionic polymer coatings for anti-biofouling surfaces

Herein, we show for the first time drop-casting zwitterionic polymer colloidal particles onto different surfaces to obtain zwitterionic coatings with highly protein-repelling properties and dual self-healing capabilities.

Biomimetic self-cleaning surfaces: synthesis, mechanism and applications

With millions of years of natural evolution, organisms have achieved sophisticated structures, patterns or textures with complex, spontaneous multifunctionality. Among all the fascinating characteristics observed in biosystems, self-cleaning ability is regarded as one of the most interesting topics in biomimicry because of its potential applications in various fields such as aerospace, energy conversion and biomedical and environmental protection. Recently, in-depth studies have been carried out on various compelling biostructures including lotus leaves, shark skins, butterfly wings and gecko feet. To understand and mimic their self-cleaning mechanisms in artificial structures, in this article, recent progress in self-cleaning techniques is discussed and summarized. Based on the underlying self-cleaning mechanisms, the methods are classified into two categories: self-cleaning with water and without water. The review gives a succinct account of the detailed mechanisms and biomimetic processes applied to create artificial self-cleaning materials and surfaces, and provides some examples of cutting-edge applications such as anti-reflection, water repellence, self-healing, anti-fogging and micro-manipulators. The prospectives and directions of future development are also briefly proposed.

Self-Healing Superhydrophobic Materials Showing Quick Damage Recovery and Long-Term Durability

Superhydrophobic coatings/materials are important for a wide variety of applications, but the majority of these man-made coatings/materials still suffer from poor durability because of their lack of self-healing ability. Here, we report novel superhydrophobic materials which can quickly self-heal from various severe types of damage. In this study, we used poly(dimethylsiloxane) (PDMS) infused with two liquids: trichloropropylsilane, which reacts with ambient moisture to self-assemble into grass-like microfibers (named silicone micro/nanograss) on the surfaces and low-viscosity silicone oil (SO), which remains within the PDMS matrices and acts as a self-healing agent. Because of the silicone micro/nanograss structures on the PDMS surfaces and the effective preserve/protection system of a large quantity of SO within the PDMS matrices, our superhydrophobic materials showed quick superhydrophobic recovery under ambient conditions (within 1-2 h) even after exposure to plasma (24 h), boiling water, chemicals, and outside environments. Such an ability is superior to the best self-healing superhydrophobic coatings/materials reported so far.

Durable superhydrophobic surfaces made by intensely connecting a bipolar top layer to the substrate with a middle connecting layer

This study reported a simple fabrication method for a durable superhydrophobic surface. The superhydrophobic top layer of the durable superhydrophobic surface was connected intensely to the substrate through a middle connecting layer. Glycidoxypropyltrimethoxysilane (KH-560) after hydrolysis was used to obtain a hydrophilic middle connecting layer. It could be adhered to the hydrophilic substrate by covalent bonds. Ring-open reaction with octadecylamine let the KH-560 middle layer form a net-like structure. The net-like sturcture would then encompass and station the silica particles that were used to form the coarse micro structures, intensely to increase the durability. The top hydrophobic layer with nano-structures was formed on the KH-560 middle layer. It was obtained by a bipolar nano-silica solution modified by hexamethyldisilazane (HMDS). This layer was connected to the middle layer intensely by the polar Si hydroxy groups, while the non-polar methyl groups on the surface, accompanied by the micro and nano structures, made the surface rather hydrophobic. The covalently interfacial interactions between the substrate and the middle layer, and between the middle layer and the top layer, strengthened the durability of the superhydrophobic surface. The abrasion test results showed that the superhydrophobic surface could bear 180 abrasion cycles on 1200 CW sandpaper under 2 kPa applied pressure.

Molting Materials: Restoring Superhydrophobicity after Severe Damage via Snakeskin-like Shedding

The nanostructures that are required to generate superhydrophobic surfaces are always sensitive to shear and are easily damaged, especially by scratching with sharp objects. As a result of this destruction, the water repellency will be lost. We introduce a novel approach to restoring the original surface properties after mechanical damage. In this approach, the damaged layer is shed like the skin of a snake. This is demonstrated with a three-layer stack as a proof-of-principle system: when the original, superhydrophobic surface layer is damaged, this leads to the dissolution of a sacrificial layer below it. Thus, the damaged layer is shed, a new unscathed surface is uncovered, and superhydrophobicity can easily be restored after a short washing.

Water-repairable zwitterionic polymer coatings for anti-biofouling surfaces

We developed a strategy to prepare new types of zwitterionic polymer network (ZPN) coatings that display excellent self-healing and anti-biofouling properties.

Environmental stimuli-responsive self-repairing waterbased superhydrophobic coatings

A waterbased self-repairing superhydrophobic coating shows a self-repairing ability after mechanical damage or contamination with organics, and thus long-term outdoor durability.

Layer-by-Layer Assembly of Fluorine-Free Polyelectrolyte-Surfactant Complexes for the Fabrication of Self-Healing Superhydrophobic Films

Fluorine-free self-healing superhydrophobic films are of significance for practical applications because of their extended service life and cost-effective and eco-friendly preparation process. In this study, we report the fabrication of fluorine-free self-healing superhydrophobic films by layer-by-layer (LbL) assembly of poly(sodium 4-styrenesulfonate) (PSS)-1-octadecylamine (ODA) complexes (PSS-ODA) and poly(allylamine hydrochloride) (PAH)-sodium dodecyl sulfonate (SDS) (PAH-SDS) complexes. The wettability of the LbL-assembled PSS-ODA/PAH-SDS films depends on the film structure and can be tailored by changing the NaCl concentration in aqueous dispersions of PSS-ODA complexes and the number of film deposition cycles. The freshly prepared PSS-ODA/PAH-SDS film with micro- and nanoscaled hierarchical structures is hydrophilic and gradually changes to superhydrophobic in air because the polyelectrolyte-complexed ODA and SDS surfactants tend to migrate to the film surface to cover the film with hydrophobic alkyl chains to lower its surface energy. The large amount of ODA and SDS surfactants loaded in the superhydrophobic PSS-ODA/PAH-SDS films and the autonomic migration of these surfactants to the film surface endow the resultant superhydrophobic films with an excellent self-healing ability to restore the damaged superhydrophobicity. The self-healing superhydrophobic PSS-ODA/PAH-SDS films are mechanically robust and can be deposited on various flat and nonflat substrates. The LbL assembly of oppositely charged polyelectrolyte-surfactant complexes provides a new way for the fabrication of fluorine-free self-healing superhydrophobic films with satisfactory mechanical stability, enhanced reliability, and extended service life.

Simple, Reversible, and Fast Modulation in Superwettability, Gradient, and Adsorption by Counterion Exchange on Self-Assembled Monolayer

A simple fabrication method for preparation of surfaces able to switch from superhydrophobic to superhydrophilic state in a reversible and fast way is described. A self-assembled monolayer (SAM) consisting of quaternary ammonium group with aliphatic tail bearing terminal thiol functionality was created on gold nano/microstructured and gold planar surfaces, respectively. A rough nano/microstructured surface was prepared by galvanic reaction on a silicon wafer. The reversible counterion exchange on the rough surface resulted in a switchable contact angle between <5° and 151°. The prewetted rough surface with Cl(-) as a counterion possesses a superoleophobic underwater character. The kinetics of counterion exchanges suggests a long hydration process and strong electron ion pairing between quaternary ammonium group and perfluorooctanoate counterion. Moreover, a wettability gradient from superhydrophobic to superhydrophilic can be formed on the modified rough gold surface in a robust and simple way by passive incubation of the substrate in a counterion solution and controlled by ionic strength. Furthermore, adsorption of gold nanoparticles to modified plain gold surface can be controlled to a high extent by counterions present on the SAM layer.

Facile preparation of self-healing waterborne superhydrophobic coatings based on fluoroalkyl silane-loaded microcapsules

A self-healing waterborne superhydrophobic coating comprising polysiloxane latex, microcapsules, fluorinated silica and photocatalytic titania nanoparticles shows self-repairing ability after mechanical damage or oily contaminations.